Mark Martin Carpentry

5/5/10

Typical safety tags

Barriers

Barricades

Outside of a hardhat

Inside of a hard hat

Safety glasses

Safety goggles

Safety face shield

Full-body harness and lanyards

Safety shoe

Safety gloves

Completed table 3

Earplugs/earmuffs

Self-contained breathing apparatus

Full face piece mask

Supplied Air Mask

Half Mask

Lift Safely

Examples of Barriers and Barricades

Barriers: tell people if there are anything that has water, big hole ect those two examples barriers but there is a lot more things that barriers can be used.Barricades: Are signs that might say road closed, detour, caution, danger, men working.

Warning

Never remove a barricade unless you have been authorized to do so. Follow your employer’s procedures for putting up and removing barricades.

Personal Protective Equipment Use And Care.

•Regularly inspect it.• Properly care for it.•Use it properly when it is needed.•Never alter or modify it in any way.

Did You Know?

Hard hats used to be made of metal. However, metal conducts electricity, so most hard hats are now made of reinforced plastic or fiberglass.

Hard Hat Care

Hard Hats take care of your head when you are on a construction site because if you don’t have it on you will risk in a injury or getting fined for not following the rules on a job site.

WarningsHandle safety glasses and goggles with care. If they get scratched, replace them. The scratches will interfere with your vision. Clean the lenses regularly with lens tissues or a soft cloth

Work gloves and safety shoe

Work gloves: are important to protect your hands well you are working so you can’t get blisters or getting hurt.Work shoe: When you are working in place that requires to wear safety shoe such as a construction site.

WarningWhen a respirator is required, a personal monitoring device is usually also required. This device samples the air to measure the concentration of hazardous chemicals.

Warnings

Handle safety glasses and goggles with care. If they get scratched, replace them. The scratches will interfere with your vision. Clean the lenses regularly with lens tissues or a soft cloth.

Review Questions1.The _________ keeps the key to a lock used for lockout/tagout.A. Site supervisorB. Person who puts on the lockC. Site safety managerD. OSHA Inspector2. You may operate a device that is tagged out if there is no imminent danger.A. TrueB. False3. A yellow and purple warning barricade means________.C. Caution D. DangerC. Physical dangerD. Radiation hazard4. Hole cover must be strong enough to support ____ the weight of anything

that may be placed on top of them.E. ExactlyF. TwiceG. Four timesH. Ten Times

Review Questions5.Adjust the webbing of a hard hat so that there is _______ between your head and the shell.

A. NO SpaceB. As much space as possibleC. At least 1 inch of space D. Less than 1 inch of space6. ___provide the best all-around protection for your eyes.E. Welding hoodsB. Face ShieldsC. Safety gogglesD. Strap-on glasses 7. A_____ has its own clean air supply E. Half mask B. Mouthpiece with mechanical filterC. Self-contained breathing apparatusD. Full face piece mask8. Whenever there is danger of an inhalation hazard, you must use a

respirator.E. TrueF. False

Review Questions9._____do(es) not interfere with the respirator’s sealA. Facial hairB. Gum and Tobacco chewingC. DenturesD. Temple bars on glasses10. When lifting heavy objects, keep as much weight

as possible over your______.A. HipsB. ShouldersC. LegsD. Back

Answers Review Questionsc. Site safety managerb. Falsea. Cautionb. Twicec. At least 1 inch of spacec. Safety gogglesc. self- contained breathing apparatusa. Trueb. Gum and chewing tobaccoc. legs

Sources

-Google images-Textbook