Carpenter & Paterson Construction Fasteners

&

Catalog CF2009

CARPENTER & PATERSON, INC.CARPENTER PATERSON, INC.

7 & &

CARPENTER & PATERSON, INC.CONSTRUCTION FASTENERS TERMS and CONDITIONS of SALE

Effective 3-31-2008

1. PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller’s acceptance of an order, but seller assumes no responsibility or liability, and will accept no backcharge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay.

3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller’s responsibility ceases and the title passes on delivery to the carrier.

4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded).

5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-to-order products (either published or unpublished) are non-cancelable / non-returnable.

6. PRODUCT APPLICATION: Seller’s products are intended for installation and service as illustrated or described in seller’s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication.

Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller.

In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office.

7 WARRANTY: Carpenter & Paterson Inc warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture. WARRANTY: Carpenter Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product.

Where engineering design or fabrication work is supplied, Buyer’s acceptance of Seller’s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson’s product warranty. The foregoing constitutes the Purchaser’s sole and exclusive remedy under Carpenter & Paterson warranty.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTIOUS ACT OR OMISSION.

The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification.

8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities.

9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $150.00 will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors.

10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.

www.carpenterandpaterson.com

Table of Contents

SECTION I

SECTION VI RODSLAG / ALL THREAD / STUDS / MACHINE / EYE 25

SECTION VII

SECTION XIV SAW BLADESRECIPROCATING / BAND SAW / HOLE SAW 77

Construction Fasteners

PAGENUTS

FINISHED / HEAVY / 2H / LOCK / INSERT 4

SECTION II WASHERSFLAT / SPLIT / FENDER / PLATE / BEVEL 6

SECTION III ROD COUPLINGSREDUCING / REGULAR / SIGHT HOLE 8

SECTION IV BOLTSGRADE A / A325 / TAP / B7 10

SECTION V SCREWSLAG / SELF / / LTAPPING DRIVE DRYWAL 20

U‐BOLTSSTANDARD / LIGHT DUTY / DUCTILE IRON 34

SECTION VIII WALL ANCHORSWING / TOGGLE / DRYWALL ANCHORS 36

SECTION IX CAST‐IN ANCHORSBANG‐IT / WOOD‐KNOCKERS / ANCHOR BOLT 40

SECTION X CONCRETE ANCHORSHAMMER‐IN / TOOLS / BITS / DROP‐IN / EXPANSION / SLEEVE / WEDGE / TAPCON 43

SECTION XI CRACKED CONCRETETRUBOLT+ / SNAKE+ / VERTIGO+ / POWER‐STUD+ / WEDGE‐BOLT+ / PE1000+ / AC100+ / G5 63

SECTION XII ADHESIVEPOWER‐FAST+ / POWERSTICK / EPCON A7 & C6 / HIT HY‐50, HY20 & ICE 68

SECTION XIII ROD HANGERSWOOD, & / / STEEL CONCRETE ROD HANGERS SAMMY VERTIGO 70

[email protected]

Page 4 Section IPage 4 Section I

1" 42.50 10 1201-1/8" 59.20 Bulk Bulk

Construction Fasteners Nuts

FINISHED HEX NUTS, GRADE A, NCFigure 165

Tap WGT Box Case Size 100 PCS Quantity Quantity1/4" 0.68 100 4800

5/16" 1.023/8" 1.49

100100

48002400

7/16" 2.96 100 18001/2" 3.60 50 12005/8" 7.11 25 6003/4" 11.8 20 3607/8" 17.5 15 1801" 26.4 10 120

1-1/8" 39.8 Bulk BulkAvailable Finishes 1-1/4" 51.7 Bulk BulkPlain, Electro Zinc, Hot Dipped Galvanized 1-3/8" 73.0 Bulk BulkStainless 304 & Stainless 316 1-1/2" 88.1 Bulk Bulk

HEAVY HEX NUTS, GRADE A, NCFigure 165H

Tap WGTSize 100 PCS

BoxQuantity

Case Quantity

1/4" 1.16 100 48005/16" 1.72 100 36003/8" 3.20 100 24007/16" 4.16 50 12001/2" 6.54 50 12005/8" 11.90 25 6003/4" 19.30 20 3607/8" 29.70 15 180

1-1/4" 78.60 Bulk Bulk1-3/8" 102.0 Bulk Bulk1-1/2" 131.0 Bulk Bulk1-3/4" 204.0 Bulk Bulk

2" 299.0 Bulk Bulk2-1/4" 419.0 Bulk Bulk

Available Finishes 2-1/2" 564.0 Bulk BulkPlain, Electro Zinc, Hot Dipped Galvanized 2-3/4" 738.0 Bulk BulkStainless 304 & Stainless 316 3" 950.0 Bulk Bulk


Tap WGT Box

Available FinishesPlain, Electro Zinc & Hot Dipped Galvanized

NYLON INSERT LOCKNUTS, GRADE A, NCFi 165NYL

Section I Page 5Section I Page 5

Figure 165NYL

3/4" 12.3 20Available Finishes 7/8" 19.6 15Electro Zinc, Stainless 304 & Stainless 316

5/8" 19.0 250Available Finishes 3/4" 22.0 100Plain & Electro Zinc 7/8" 24.0 100

Construction Fasteners Nuts

HEAVY HEX NUTS, ASTM A194, GRADE 2H Figure 1652H

Size 100 PCS Quantity3/8" 3.20 1001/2" 6.54 505/8" 11.9 253/4" 19.3 207/8" 29.7 151" 42.5 10

1-1/8" 59.2 Bulk1-1/4" 78.6 Bulk1-3/8" 102.0 Bulk1-1/2" 131.0 Bulk1-3/4" 204.0 Bulk

2" 299.0 Bulk

Tap WGT BoxSize 100 PCS Quantity1/4" 0.84 1003/8" 1.76 1001/2" 4.10 505/8" 8.55 25

1" 27.3 10

CONCRETE INSERT NUTSFigure 650N

Tap WGT BoxSize 100 PCS Quantity3/8" 13.0 2501/2" 15.0 250

[email protected]

FLAT WASHERS USS

Page 6 Section IIPage 6 Section II

1/4" 0.22 100 7200

7/16" 0.90 100 3600

Available FinishesPlain, Electro Zinc, Hot Dipped GalvanizedStainless 304 & Stainless 316

FENDER WASHERFigure 8

Available Finishes

Construction Fasteners Washers

Figure 103Rod WGT Box Case Size 100 PCS Quantity Quantity1/4"5/16"

0.67 1001.11 100

72004800

3/8" 1.49 100 24007/16" 2.44 50 18001/2" 3.85 50 12005/8"3/4"

7.70 2511.0 20

600360

7/8" 15.3 15 1801" 18.8 10 120

1-1/8" 22.2 Bulk BulkAvailable Finishes 1-1/4" 26.0 Bulk

32.0Bulk

Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8"Stainless 304 & Stainless 316 1-1/2"

Bulk38.5 Bulk

BulkBulk

SPLIT LOCK WASHERFigure 176

RodSize

WGT Box100 PCS Quantity

Case Quantity

5/16" 0.38 100 48003/8" 0.60 100 4800

1/2" 1.30 100 24005/8" 2.40 100 18003/4" 4.00 100 9007/8" 6.34 100 6001" 8.80 100 300

Rod WGT Box Case Size 100 PCS Quantity Quantity1/4"5/16"

2.252.21

100100

24002400

Plain, Electro Zinc, Hot Dipped Galvanized 3/8" 3.16 100 1200Stainless 304 & Stainless 316 1/2" 5.59 100 900


Section II Page 7Section II Page 7

255.042.066.03/8 X 2‐1/2 X 2‐1/2

1/4 X 6 X 63/8 X 2 X 2


LIGHT DUTY WASHER PLATEFigure 102

Rod Hole Steel WGTSize Size Size 100 PCS3/8" 7/16"1/2" 9/16"

1/8 X 1/8 X

2 X 23 X 3

14.032.0

5/8" 11/16" 1/8 X 4 X 4 57.03/4" 13/16" 1/8 X 5 X 5 89.07/8" 15/16" 1/8 X 6 X 6 128.01" 1‐1/16"

3/16 X3/16 X

3 X 3 2 X 2 21.0

48.03/16 X 4 X 4 83.03/16 X 5 X 5 133.03/16 X 6 X 6 191.01/4 X 2 X 2 28.0

1/4 X 2‐1/4 X

1/2 X 2‐1/23 X 3

44.064.0

1/4 X / 4 X 4 113.01/4 X 5 X 5 177.0

95.03/8 X 3 X 3170.03/8 X 4 X 4

Available Finishes 3/8 X 5 X 5 266.0Plain, Painted, Hot Dipped Galvanized 3/8 X 6 X 6 383.0

BEVEL WASHERFigure 706

Rod WGT BoxSize3/8"

100 PCS7.4

Quantity600

1/2" 7.7 6005/8" 13.1 3003/4" 14.1 300

Available Finishes 7/8" 32.5 100Plain, Electro Zinc & Hot Dipped Galvanized 1" 29.4 100

[email protected]

Figure 260

Available FinishesPlain, Painted, Hot Dipped Galvanized

Page 8 Section IIIPage 8 Section III

C li

REDUCING ROD COUPLINGFigure 123R

Rod

7/8"

Size1/4" X 3/8"3/8" X 1/2"1/2" X 5/8"


WASHER PLATE

Rod Steel WGTSize Size 100 PCS3/8" 1/4 X 3 X 3 63.01/2" 1/4 X 3 X 3 61.05/8" 3/8 X 3 X 3 95.03/4" 3/8 X 4 X 4 160.07/8" 1/2 X 4 X 4 217.01" 1/2 X 4 X 4 215.0

1‐1/4" 1/2 X 5 X 5 328.01‐1/2" 5/8 X 5 X 5 405.01‐3/4" 5/8 X 5 X 5 388.02" 3/4 X 6 X 6 447.0

2‐1/4" 3/4 X 6 X 6 662.02‐1/2" 3/4 X 6 X 6 640.02‐3/4" 3/4 X 6 X 6 616.03" 3/4 X 6 X 6 589.0

R dRod C ouplings

WGT Box Case 100 PCS Quantity Quantity3.89 100 12506.68 100 62511.0 50 400

5/8" X 21.7 3/4" 25 2003/4" X 55.0 7/8" 20 Bulk

70.0X 1" 15 BulkAvailable Finishes 1" X 1 87.0‐1/8" 10 BulkPlain & Electro Zinc 1‐1/8" X 98.0 1‐1/4" Bulk Bulk


ROD COUPLING

Section III Page 9 Section III Page 9

ss 316 Bulk 20

Construction Fasteners Rod Couplings

Figure 123Tap WGT Box Case Size 100 PCS Quantity Quantity1/4" 5.70 100 10005/16" 6.97 100 5003/8" 8.21 100 5001/2" 11.0 50 4005/8" 16.9 25 2503/4" 28.5 20 1507/8" 54.2 15 751" 42.9 10 75

1-1/8" 72.0 Bulk 75Available Finishes 1-1/4" 87.6 Bulk 50Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8" 100.0 Bulk 30Stainless 304 & Stainless 316 1-1/2" 200.0 Bulk 20

ROD COUPLING WITH SIGHT HOLEFigure 123W

Tap WGT Box Case Size 100 PCS Quantity Quantity1/4" 5.70 100 10005/16" 6.97 100 5003/8" 8.21 100 5001/2" 11.0 50 4005/8" 16.9 25 2503/4" 28.5 20 1507/8" 54.2 15 751" 42.9 10 75

1-1/8" 72.0 Bulk 75Available Finishes 1-1/4" 87.6 Bulk 50Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8" 100.0 Bulk 30Stainless 304 & Stainle 1-1/2" 200.0

[email protected]

Figure BLT

Page 10 Section IVPage 10 Section IV

Construction Fasteners Bolts

HEX BOLTS, GRADE A

Bolt WGT Case Size 100 PCS Quantity

1/4 X 1/2" 1.18 50001/4 X 3/4" 1.44 40001/4 X 1" 1.67 3600

1/4 X 1‐1/4" 2.02 28001/4 X 1‐1/2" 2.39 24001/4 X 1‐3/4" 2.70 1800

1/4 X 2" 3.07 1600 1/4 X 2‐1/4' 3.40 1300

1/4 X 2‐1/2" 3.75 13001/4 X 2‐3/4" 4.06 9001/4 X 3" 4.35 900

1/4 X 3‐1/4" 4.64 8001/4 X 3‐1/2" 5.10 7501/4 X 4" 5.75 700

1/4 X 4‐1/2"/ / 6.36 600 1/4 X 5" 6.92 600 1/4 X 5‐1/2" 7.74 500

1/4 X 6" 8.39 5001/4 X 6‐1/2" 9.19 5001/4 X 7" 9.88 500

1/4 X 7‐1/2" 10.6 5001/4 X 8" 11.3 400

5/16 X 1/2" 1.82 30005/16 X 3/4" 2.33 26005/16 X 1" 2.74 2200

5/16 X 1‐1/4" 3.23 18005/16 X 1‐1/2" 3.82 16005/16 X 1‐3/4" 4.27 13005/16 X 2" 4.82 1200

5/16 X 2‐1/4" 5.39 9005/16 X 2‐1/2" 5.95 9005/16 X 2‐3/4" 6.46 7505/16 X 3" 6.91 700

*Available in different 5/16 X 3‐1/4" 7.45 600diameters and lengths 5/16 X 3‐1/2" 8.00 600

5/16 X 3‐3/4" 8.41 500Available Finishes 5/16 X 4" 8.98 450Plain, Electro Zinc, Hot Dipped Galvanized 5/16 X 4‐1/2" 10.1 400Stainless 304 & Stainless 316 5/16 X 5" 11.2 300


Section IV Page 11Section IV Page 11


HEX BOLTS, GRADE A

Bolt WGT Case Bolt WGT Case Size 100 PCS Quantity Size 100 PCS Quantity

5/16 X 5‐1/2" 12.3 300 7/16 X 6" 26.2 1755/16 X 6" 13.3 300 7/16 X 7" 28.4 175

5/16 X 6‐1/2" 14.2 300 7/16 X 8" 30.5 1755/16 X 7" 15.2 300 1/2 X 3/4" 7.26 900

5/16 X 7‐1/2" 16.3 300 1/2 X 1" 8.29 7505/16 X 8" 17.3 300 1/2 X 1‐1/4" 9.30 6503/8 X 1/2" 2.89 2100 1/2 X 1‐1/2" 10.4 6003/8 X 3/4" 3.40 1800 1/2 X 1‐3/4" 11.8 5003/8 X 1" 4.03 1500 1/2 X 2" 13.3 450

3/8 X 1‐1/4" 4.78 1300 1/2 X 2‐1/4" 14.6 4003/8 X 1‐1/2" 5.54 1000 1/2 X 2‐1/2" 16.1 3253/8 X 1‐3/4" 6.22 1000 1/2 X 2‐3/4" 17.3 3003/8 X 2" 6.94 800 1/2 X 3" 18.8 300

3/8 X 2‐1/4"3/8 X 2‐1/2"/ /

7.698.52

700650

1/2 X 3‐1/4"1/2 X 3‐1/2"/ /

20.221.5

250250

3/8 X 2‐3/4" 9.24 600 1/2 X 3‐3/4" 22.9 2003/8 X 3" 10.0 500 1/2 X 4" 24.1 200

3/8 X 3‐1/4" 10.8 425 1/2 X 4‐1/2" 26.6 1753/8 X 3‐1/2" 11.5 400 1/2 X 5" 29.6 1503/8 X 3‐3/4" 12.4 325 1/2 X 5‐1/2 32.4 1503/8 X 4" 13.1 325 1/2 X 6" 35.1 150

3/8 X 4‐1/2" 14.4 300 1/2 X 6‐1/2" 37.3 1503/8 X 5" 16.0 300 1/2 X 7" 39.4 150

3/8 X 5‐1/2" 17.5 250 1/2 X 7‐1/2 43.0 1253/8 X 6" 19.1 250 1/2 X 8" 44.8 125

3/8 X 6‐1/2" 20.8 250 1/2 X 8‐1/2" 49.0 1203/8 X 7" 22.4 250 1/2 X 9" 51.7 120

3/8 X 7‐1/2" 23.9 250 1/2 X 9‐1/2" 54.5 1203/8 X 8" 25.4 250 5/8 X 1" 14.6 4007/16 X 1" 5.67 1100 5/8 X 1‐1/4" 16.1 350

7/16 X 1‐1/4" 6.50 950 5/8 X 1‐1/2" 18.0 3007/16 X 1‐1/2" 7.51 750 5/8 X 1‐3/4" 19.8 3007/16 X 2" 9.57 600 5/8 X 2" 22.4 250

7/16 X 2‐1/2" 11.5 450 5/8 X 2‐1/4" 24.2 2257/16 X 3" 13.6 400 5/8 X 2‐1/2" 26.3 200

7/16 X 3‐1/2" 15.6 300 5/8 X 2‐3/4" 28.1 2007/16 X 4" 17.9 250 5/8 X 3" 30.5 175

7/16 X 4‐1/2" 20.0 225 5/8 X 3‐1/4" 32.4 1507/16 X 5" 22.1 175 5/8 X 3‐1/2" 34.6 150

[email protected]

WGT Case WGT100 PCS Quantity37.9 12540.1 12544.4 10048.7 9053.0 7557.3 7560.2 7064.4 7068.7 6072.9 6077.2 7581.4 7585.6 7589.9 7594.1 7098 3 70

BoltSize

5/8 X 3‐3/4"5/8 X 4"

5/8 X 4‐1/2"5/8 X 5"

5/8 X 5‐1/2"5/8 X 6"

5/8 X 6‐1/2"5/8 X 7"

5/8 X 7‐1/2"5/8 X 8"

5/8 X 8‐1/2"5/8 X 9"

5/8 X 9‐1/2"5/8 X 10"

5/8 X 10‐1/2"5/8 X 11"


98.3 70 80102.6 70106.8 6023.6 25027.1 22529.7 20032.3 20035.1 18038.2 15041.3 14044.5 13047.6 12050.7 11053.8 10056.9 9060.0 8566.2 8072.4 6578.7 6084.9 6088.8 60

107.2 60 89.5 65

5/8 X 11"5/8 X 11‐1/2"5/8 X 12"3/4 X 1"

3/4 X 1‐1/4"3/4 X 1‐1/2"3/4 X 1‐3/4"3/4 X 2"

3/4 X 2‐1/4"3/4 X 2‐1/2"3/4 X 2‐3/4"3/4 X 3"

3/4 X 3‐1/4"3/4 X 3‐1/2"3/4 X 3‐3/4"3/4 X 4"

3/4 X 4‐1/2"3/4 X 5"

3/4 X 5‐1/2"3/4 X 6"

3/4 X 6‐1/2"

3/4 X 8"

8 X 3 4"


HEX BOLTS, GRADE A

Bolt Case Size 100 PCS Quantity

3/4 X 8‐1/2" 113.8 603/4 X 9" 119.5 60

3/4 X 9‐1/2" 125.7 503/4 X 10" 131.8 50

3/4 X 10‐1/2" 138.0 503/4 X 11" 144.1 50

3/4 X 11‐1/2" 150.3 403/4 X 12" 156.4 40

7/8 X 1‐1/2" 42.3 1407/8 X 1‐3/4" 45.7 1307/8 X 2" 49.5 120

7/8 X 2‐1/4" 53.5 1107/8 X 2‐1/2" 58.0 1057/8 X 2‐3/4" 62.3 907/8 X 3" 66.5 90

7/8 X 3 1/4"7/ ‐1/ 70 870.8 807/8 X 3‐1/2" 76.1 707/8 X 3‐3/4" 79.3 657/8 X 4" 83.5 60

7/8 X 4‐1/2" 92.0 607/8 X 5" 100.5 50

7/8 X 5‐1/2" 109.0 457/8 X 6" 117.5 45

7/8 X 6‐1/2" 126.0 457/8 X 7" 134.5 45

7/8 X 7‐1/2" 143.0 457/8 X 8" 151.0 40

7/8 X 8‐1/2" 160.0 407/8 X 9" 168.0 40

7/8 X 9‐1/2" 177.0 407/8 X 10" 185.5 40

7/8 X 10‐1/2" 194.0 357/8 X 11" 202.5 357/8 X 12" 219.5 301 X 2" 67.6 90

1 X 2‐1/4" 73.1 8594.9 603/4 X 7" 1 X 2‐1/2" 77.8 80101.1 603/4 X 7‐1/2" 1 X 2‐3/4" 83.9 70

1 X 3"



30 251 X 10" 1 2 X 3 2"


HEX BOLTS, GRADE A


1 X 3‐1/4" 94.9 60 1‐1/4 X 4‐1/2" 208.5 301 X 3‐1/2" 100.4 60 1‐1/4 X 5" 225.5 251 X 3‐3/4" 105.8 50 1‐1/4 X 5‐1/2" 242.5 251 X 4" 111.3 50 1‐1/4 X 6" 259.5 20

1 X 4‐1/2" 122.2 40 1‐1/4 X 6‐1/2" 275.4 201 X 5" 133.2 40 1‐1/4 X 7" 292.4 20

1 X 5‐1/2" 144.1 40 1‐1/4 X 7‐1/2" 309.4 181 X 6" 155.0 40 1‐1/4 X 8" 326.4 18

1 X 6‐1/2" 166.0 35 1‐1/4 X 8‐1/2" 343.4 151 X 7" 176.9 35 1‐1/4 X 9" 360.4 15

1 X 7‐1/2" 187.9 30 1‐1/4 X 9‐1/2" 377.4 151 X 8" 198.7 30 1‐1/4 X 10" 394.4 10

1 X 8‐1/2" 209.7 30 1‐1/4 X 11" 428.4 101 X 9" 220.6 30 1‐1/4 X 12" 462.4 10

1 X 9‐1/2" 231.5 30 1‐1/2 X 3" 244.7 251 X 10" 242 5242.5 30 1 1/2 X 3 1/2"‐1/ ‐1/ 267 6267.6 25

1 X 10‐1/2" 253.4 25 1‐1/2 X 4" 292.2 201 X 11" 264.3 25 1‐1/2 X 4‐1/2" 316.7 201 X 12" 286.2 25 1‐1/2 X 5" 341.3 18

1‐1/8 X 2‐1/2" 105.4 50 1‐1/2 X 5‐1/2" 365.8 151‐1/8 X 3" 124.0 40 1‐1/2 X 6" 390.4 15

1‐1/8 X 3‐1/2" 134.8 40 1‐1/2 X 6‐1/2" 414.1 151‐1/8 X 4" 148.5 40 1‐1/2 X 7" 437.9 15

1‐1/8 X 4‐1/2" 162.2 35 1‐1/2 X 7‐1/2" 462.4 121‐1/8 X 5" 175.9 30 1‐1/2 X 8" 487.0 12

1‐1/8 X 5‐1/2" 189.6 25 1‐1/2 X 9" 536.1 101‐1/8 X 6" 203.3 25 1‐1/2 X 10" 585.2 10

1‐1/8 X 6‐1/2" 216.1 25 1‐1/2 X 11" 634.3 101‐1/8 X 7" 229.8 25 1‐1/2 X12" 683.4 101‐1/8 X 8" 257.2 20 1‐3/4 X 4‐1/2" 430.0 101‐1/8 X 9" 284.6 15 1‐3/4 X 5" 490.0 10

1‐1/8 X 9‐1/2" 298.3 15 1‐3/4 X 5‐1/2" 550.0 81‐1/8 X 10" 312.0 15 1‐3/4 X 6" 580.0 81‐1/8 X 11" 339.4 15 1‐3/4 X 6‐1/2" 625.0 61‐1/8 X 12" 366.8 15 1‐3/4 X 7" 650.0 6

1‐1/4 X 2‐1/2" 147.0 40 1‐3/4 X 8" 720.0 61‐1/4 X 3" 157.5 35 2 X 6" 775.0 5

1‐1/4 X 3‐1/2" 174.5 35 2 X 7" 865.0 41‐1/4 X 4" 191.5 30 2 X 8" 960.0 4

[email protected]


Available Finishes 63.2 300Plain & Hot Dipped Galvanized 69.2 275


STRUCTURAL BOLTS, A325Figure BLT A325


1/2 X 1‐1/4" 11.7 17101/2 X 1‐1/2" 12.8 15601/2 X 1‐3/4" 14.1 14201/2 X 2" 15.5 1290

1/2 X 2‐1/4" 16.8 11901/2 X 2‐1/2" 18.2 11001/2 X 2‐3/4" 19.5 10001/2 X 3" 20.9 950

1/2 X 3‐1/2" 23.6 7501/2 X 4" 26.2 600

5/8 X 1‐1/2" 21.7 10505/8 X 1‐3/4" 23.5 9005/8 X 2" 25.6 875

5/8 X 2‐1/4" 27.7 7755/8 X 2‐1/2"/ / 29.8 7255/8 X 2‐3/4" 31.9 6005/8 X 3" 34.0 600

5/8 X 3‐1/2" 39.1 5005/8 X 4" 42.3 400

5/8 X 4‐1/2" 46.5 3505/8 X 5" 50.7 300

5/8 X 5‐1/2" 54.9 2755/8 X 6" 59.1 250

5/8 X 6‐1/2" 62.9 2255/8 X 7" 67.1 200

5/8 X 7‐1/2" 71.3 2005/8 X 8" 75.5 175

3/4 X 1‐1/2" 32.9 6503/4 X 1‐3/4" 36.5 6503/4 X 2" 39.0 550

3/4 X 2‐1/4" 42.0 5253/4 X 2‐1/2" 45.0 4753/4 X 2‐3/4" 48.1 4253/4 X 3" 51.1 400

3/4 X 3‐1/4" 54.1 3753/4 X 3‐1/2" 57.1 3503/4 X 3‐3/4" 60.1 3253/4 X 4"

3/4 X 4‐1/2"



115.0 175 300.0 55120.0 175 317.0 50126.0 110 333.0 50


STRUCTURAL BOLTS, A325


3/4 X 5" 75.2 225 1 X 4‐1/2" 131.0 1503/4 X 5‐1/4" 78.2 225 1 X 4‐3/4" 137.0 1103/4 X 5‐1/2" 81.3 225 1 X 5" 142.0 1303/4 X 6" 87.1 200 1 X 5‐1/2" 153.0 110

3/4 X 6‐1/2" 92.9 150 1 X 6" 163.0 1053/4 X 7" 99.0 140 1 X 6‐1/2" 173.0 100

3/4 X 7‐1/2" 105.0 135 1 X 7" 184.0 903/4 X 8" 111.0 120 1 X 7‐1/2" 194.0 803/4 X 9" 123.0 100 1 X 8" 206.0 753/4 X 10" 135.0 60 1‐1/8 X 2‐1/2" 115.0 1707/8 X 2" 56.6 425 1‐1/8 X 2‐3/4" 151.5 170

7/8 X 2‐1/4" 60.1 375 1‐1/8 X 3" 128.0 1707/8 X 2‐1/2" 64.2 350 1‐1/8 X 3‐1/2" 141.0 1357/8 X 2‐3/4" 68.3 325 1‐1/8 X 4" 155.0 1257/8 X 3"/ 72.4 300 1‐1/8 X 4‐1/4"/ / 162.0 125

7/8 X 3‐1/4" 76.6 275 1‐1/8 X 4‐1/2" 168.0 1157/8 X 3‐1/2" 80.7 250 1‐1/8 X 4‐3/4" 175.0 1107/8 X 3‐3/4" 84.5 250 1‐1/8 X 5" 182.0 1057/8 X 4" 88.9 225 1‐1/8 X 5‐1/2"" 196.0 90

7/8 X 4‐1/2" 98.0 200 1‐1/8 X 6" 209.0 857/8 X 5" 106.0 175 1‐1/8 X 6‐1/2" 222.0 75

7/8 X 5‐1/2" 114.0 150 1‐1/8 X 7" 235.0 707/8 X 6" 122.0 135 1‐1/8" 7‐1/2" 249.0 70

7/8 X 6‐1/2" 130.0 125 1‐1/8 X 8" 263.0 607/8 X 7" 138.0 120 1‐1/4 X 3" 167.0 130

7/8 X 7‐1/2" 145.0 110 1‐1/4 X 3‐1/4" 175.0 1257/8 X 8" 155.0 90 1‐1/4 X 3‐1/2" 183.0 120

7/8 X 8‐1/2" 163.0 85 1‐1/4 X 3‐3/4" 192.0 1107/8 X 9‐1/2" 179.0 80 1‐1/4 X 4" 200.0 100

1 X 2" 78.8 300 1‐1/4 X 4‐1/4" 209.0 951 X 2‐1/4" 83.4 275 1‐1/4 X 4‐1/2" 217.0 901 X 2‐1/2" 88.0 250 1‐1/4 X 4‐3/4" 225.0 851 X 2‐3/4" 94.0 225 1‐1/4 X 5" 234.0 851 X 3" 99.0 225 1‐1/4 X 5‐1/2" 251.0 75

1 X 3‐1/4" 104.0 200 1‐1/4 X 6" 267.0 701 X 3‐1/2" 110.0 175 1‐1/4 X 6‐1/2" 283.0 651 X 3‐3/4" 1‐1/4 X 7"1 X 4" 1‐1/4 X 7‐1/2"

1 X 4‐1/4" 1‐1/4 X 8"

[email protected]


Available Finishes


TAP BOLTS, GRADE AFigure TBLT


1/4 X 1/2" 1.18 48001/4 X 3/4" 1.44 35001/4 X 1" 1.67 3600

1/4 X 1‐1/4" 2.01 28001/4 X 1‐1/2" 2.36 24001/4 X 1‐3/4" 2.70 18001/4 X 2" 3.07 1600

1/4 X 2‐1/4" 3.40 13001/4 X 2‐1/2" 3.75 13001/4 X 2‐3/4" 4.06 9001/4 X 3" 4.35 900

1/4 X 3‐1/2" 5.10 7501/4 X 4" 5.75 700

1/4 X 4‐1/2"1/4 X 5"/

6.366.92

600600

1/4 X 5‐1/2" 7.74 5001/4 X 6" 8.39 5005/16 X 1" 2.74 2200

5/16 X 1‐1/4" 3.32 18005/16 X 1‐1/2" 3.82 16005/16 X 1‐3/4" 4.27 13005/16 X 2" 4.82 1200

5/16 X 2‐1/4" 5.39 9005/16 X 2‐1/2" 5.95 9005/16 X 2‐3/4" 6.91 8005/16 X 3" 6.90 700

5/16 X 3‐1/2" 8.00 6005/16 X 4" 8.98 450

5/16 X 4‐1/2" 10.1 4005/16 X 5" 11.1 300

5/16 X 5‐1/2" 12.3 3005/16 X 6" 13.3 3003/8 X 1" 4.03 1500

3/8 X 1‐1/4" 4.78 13003/8 X 1‐1/2" 5.54 10003/8 X 1‐3/4" 6.22 1000

Plain & Electro Zinc 3/8 X 2" 6.94 800




TAP BOLTS, GRADE A


3/8 X 2‐1/4" 7.69 700 5/8 X 3‐1/2" 34.6 1503/8 X 2‐1/2" 8.50 650 5/8 X 4" 38.9 1253/8 X 2‐3/4" 9.30 600 5/8 X 4‐1/2" 44.4 1003/8 X 3" 10.00 500 5/8 X 5" 48.7 90

3/8 X 3‐1/2" 11.50 400 5/8 X 5‐1/2" 53.0 753/8 X 4" 13.10 325 5/8 X 6" 57.3 75

3/8 X 4‐1/2" 14.40 300 5/8 X 7" 64.4 703/8 X 5" 16.00 300 5/8 X 8" 72.9 60

3/8 X 5‐1/2" 17.50 250 5/8 X 9" 72.7 753/8 X 6" 19.10 250 3/4 X 2" 34.4 1503/8 X 7" 22.40 250 3/4 X 2‐1/2" 40.3 1403/8 X 8" 25.40 250 3/4 X 3" 46.0 1207/16 X 1" 5.67 900 3/4 X 3‐1/4" 48.9 1101/2 X 1" 8.29 750 3/4 X 3‐1/2" 52.4 100

1/2 X 1‐1/4"/ / 9.30 650 3/4 X 4"/ 58.5 851/2 X 1‐1/2" 10.4 600 3/4 X 4‐1/2" 66.2 801/2 X 1‐3/4" 11.8 500 3/4 X 5" 72.4 651/2 X 2" 13.3 450 3/4 X 5‐1/2" 78.7 60

1/2 X 2‐1/4" 14.6 400 3/4 X 6" 84.9 601/2 X 2‐1/2" 16.1 325 3/4 X 7" 94.9 601/2 X 2‐3/4" 17.3 300 3/4 X 8" 107.2 601/2 X 3" 18.8 300 3/4 X 11 129.5 50

1/2 X 3‐1/2" 21.5 250 7/8 X 2‐1/2" 58.0 1051/2 X 4" 24.1 200 7/8 X 3" 66.5 90

1/2 X 4‐1/2" 26.6 175 7/8 X 3‐1/2" 76.1 701/2 X 5" 29.6 150 7/8 X 4" 83.5 60

1/2 X 5‐1/2" 32.4 150 7/8 X 4‐1/2" 92.0 601/2 X 6" 35.1 150 7/8 X 5" 100.5 50

1/2 X 6‐1/2" 37.3 150 7/8 X 6" 117.5 451/2 X 7" 39.4 150 1 X 2" 66.1 801/2 X 8" 44.8 125 1 X 2‐1/2" 77.8 80

5/8 X 1‐1/2" 19.8 300 1 X 3" 89.5 655/8 X 1‐3/4" 19.8 300 1 X 3‐1/2" 100.4 605/8 X 2" 22.4 250 1 X 4" 111.3 60

5/8 X 2‐1/4" 24.2 225 1 X 4‐1/2" 122.2 405/8 X 2‐1/2" 26.3 200 1 X 5" 133.2 405/8 X 3" 30.5 175 1 X 6" 155.0 40

[email protected]


BOLTS, A193 GRADE B7Figure BLT B7

WGT Case 100 PCS Quantity

9.2 40010.3 37511.6 30013.0 27515.7 22517.1 22518.5 20019.9 20021.3 17522.6 15023.8 15025.4 15028.2 12529.6 12530.9 125


32.2 10033.7 10036.4 10016.9 22518.7 20020.7 17522.8 17525.0 15027.1 12529.3 12531.4 10033.6 10035.8 10037.9 10040.1 9042.3 8544.4 8046.5 7548.7 7553.0 70

Available Finishes 57.3 65Plain 60.3 60

SizeBolt

1/2 X 2‐1/2"1/2 X 2‐3/4"1/2 X 3"

1/2 X 3‐1/4"1/2 X 3‐1/2"1/2 X 3‐3/4"1/2 X 4"

1/2 X 4‐1/2"1/2 X 4‐3/4"1/2 X 5"

1/2 X 2‐1/4"

1/2 X 1"1/2 X 1‐1/4"1/2 X 1‐1/2"1/2 X 1‐3/4"

5/8 X 5"5/8 X 5‐1/2"

5/8 X 4"5/8 X 4‐1/4"5/8 X 4‐1/2"5/8 X 4‐3/4"

5/8 X 6"5/8 X 6‐1/2"

5/8 X 2‐1/2"5/8 X 2‐3/4"5/8 X 3"

5/8 X 3‐1/4"5/8 X 3‐1/2"5/8 X 3‐3/4"

1/2 X 6"5/8 X 1‐1/4"5/8 X 1‐1/2"5/8 X 1‐3/4"5/8 X 2"

5/8 X 2‐1/4"

1/2 X 5‐1/2"

/1/2 X 5‐1/4"


100 PCS Quantity29.7 12532.3 12035.1 10038.2 10041.3 9044.5 8547.6 8050.7 7553.8 7057.2 6560.0 6066.2 5572.4 4578.6 4584.9 4051 1 757/8 X 2"

3/4 X 3‐3/4"3/4 X 4"

3/4 X 4‐1/2"3/4 X 5"

3/4 X 5‐1/2"3/4 X 6"

3/4 X 2‐1/4"3/4 X 2‐1/2"3/4 X 2‐3/4"3/4 X 3"

3/4 X 3‐1/4"3/4 X 3‐1/2"

3/4 X 2"

3/4 X 1‐1/2"3/4 X 1‐3/4"

BoltSize


51.1 75 217 4 1555.0 7059.2 6563.4 6067.7 5571.9 5076.1 5080.3 4585.6 4593.0 40101.5 35110.0 35118.4 3070.1 5074.8 5079.9 4585.4 4090.9 4096.5 40102.0 35108.0 35113.0 35124.1 30135.0 25

1 X 4‐1/2"1 X 5"

7/8 X 4‐1/2"

7/8 X 2"7/8 X 2‐1/4"7/8 X 2‐1/2"7/8 X 2‐3/4"7/8 X 3"

7/8 X 3‐1/4"

1‐1/8 X 6‐

1 X 3‐1/4"1 X 3‐1/2"1 X 3‐3/4"1 X 4"

7/8 X 6"1 X 2"

1 X 2‐1/4"1 X 2‐1/2"1 X 2‐3/4"1 X 3"

7/8 X 3‐1/2"7/8 X 3‐3/4"7/8 X 4"

7/8 X 5"7/8 X 5‐1/2"


BOLTS, A193 GRADE B7

WGT Case WGT Case BoltSize 100 PCS Quantity

1 X 5‐1/2" 146.1 251 X 6"

1 X 6‐1/2"157.2167.0

2520

1 X 7" 177.0 201 X 8" 199.0 15

1‐1/8 X 2‐3/4" 113.5 351‐1/8 X 3" 119.3 30

1‐1/8 X 3‐1/4" 126.3 301‐1/8 X 3‐1/2"1‐1/8 X 3‐3/4"

133.3140.3

3025

1‐1/8 X 4" 147.3 251‐1/8 X 4‐1/2" 161.3 201‐1/8 X 5" 175.4 20

1‐1/8 X 5‐1/2" 189.4 201‐1/8 X 6" 203.4 15

1‐1/8 X 6‐1/2" 1/2"1‐1/8 X 7"

217 4.231.4

1515

1‐1/8 X 7‐1/2" 245.5 151‐1/4 X 3" 154.4 25

1‐1/4 X 3‐1/2" 171.7 201‐1/4 X 4" 188.9 20

1‐1/4 X 4‐1/2" 206.2 15

1‐1/4 X 5‐1/2"1‐1/4 X 5" 223.5

240.81515

1‐1/4 X 6" 258.1 151‐1/4 X 6‐1/2" 275.4 151‐1/4 X 7" 292.7 101‐1/2 X 3" 260.0 10

1‐1/2 X 3‐1/4" 270.0 101‐1/2 X 3‐1/2"1‐1/2 X 3‐3/4"

280.0290.0

1010

1‐1/2 X 4" 300.0 101‐1/2 X 4‐1/2" 320.0 101‐1/2 X 5" 341.0 10

1‐1/2 X 5‐1/2" 370.0 101‐1/2 X 6" 390.0 10

1‐1/2 X 7"1‐1/2 X 6‐1/2" 420.0

440.01010

1‐1/2 X 8" 492.0 10

[email protected]

Page 20 Section VPage 20 Section V

Construction Fasteners Screws

Lag "Coach" ScrewsFigure 107

WGT Case ScrewSize 100 PCS Quantity

1/4 X 1" 1.48 35001/4 X 1‐1/4" 1.67 28001/4 X 11/4 X 1

‐1/2"‐3/4"

1.832.07

24001800

1/4 X 2" 2.58 16001/4 X 2‐1/2" 3.00 13001/4 X 3" 4.03 900

1/4 X 3‐1/2" 4.03 7501/4 X 4" 4.44 700

1/4 X1/4 X 4

5"‐1/2" 4.90

5.46600600

1/4 X 5‐1/2" 6.21 6001/4 X 6" 6.59 5005/16 X 1" 2.93 2200

5/16 X / 1‐1/4"/ 3.21 18005/16 X 1‐1/2" 3.49 16005/16 X 5/16

1‐3/4" X 2"

3.214.05

13001200

5/16 X 2‐1/2" 4.62 9005/16 X 3" 5.38 700

5/16 X 3‐1/2" 5.94 5005/16 X 4" 6.88 450

5/16 X 4‐1/2" 7.76 4005/16

5/16 X X 5"5‐1/2"

8.629.94

300300

5/16 X 6" 10.30 3003/8 X 1" 3.18 1500

3/8 X 1‐1/4" 3.66 13003/8 X 1‐1/2" 4.19 10003/8 X 13/8 X

‐3/4" 2"

4.855.40

1000800

3/8 X 2‐1/2" 6.51 650Available Finishes 3/8 X 3" 7.76 500Plain, Electro Zinc & Hot Dipped Galvanized 3/8 X 3‐1/2" 8.78 400


12.5 30013.9 25015.0 25017.0 25019.5 25031.0 20023.8 20028.1 20032.4 2008.43 55010.7 45013.4 40015.1 30017 5 250

Screw

1/2 X 2‐1/2"1/2 X 3"

1/2 X 3 1/2"

Size

Lag "Coach" Screws

1/2 X 2"

3/8 X 4‐1/2"3/8 X 5"

3/8 X 5‐1/2"3/8 X 6"3/8 X 7"3/8 X 8"3/8 X 9"3/8 X 10"3/8 X 12"3/8 X 14"

1/2 X 1‐1/2"

3/8 X 4"

Section V Page 21Section V Page 21

17.5 250 30

26.6 150

42.8 120 81.1 8048.5 120 86.3 7052.9 120 89.5 65

92.7 65106.7 60

88.3 70132.0 5017.9 275

28.1 180

6" 7"

3/4 X 7‐1/2"

8 X 24"

5/8 X 2"5/8 X 25/8 X

5/8 X 3‐1/2"

1/2 X 11"1/2 X 12"1/2 X 14"1/2 X 16"1/2 X 18"1/2 X 24"

1/2 X 10"

1/2 X 3‐1/2"

1/2 X 5‐1/2"

1/2 X 9"


WGT

100 PCSCase WGT Case

Quantity 100 PCS QuantityScrewSize

10.1 325 31.7 16011.4 300 34.5 150

5/8 X 4"5/8 X 4‐1/2"5/8 X 5" 38.3 140

5/8 X 55/8 X

‐1/2" 6"

42.245.3

130120

5/8 X 7" 51.9 1005/8 X 8" 59.7 905/8 X5/8 X

9" 10"

67.575.8

7575

5/8 X 11" 83.1 605/8 X5/8 X

12" 14"

90.3109.4

6060

5/8 X 16" 123.8 505/8 X5/8 X

18" 20"

138.2173.0

4535

5/8 X5/ 24" 207 0207.0 3019.5 2001/2 X 4" 3/4 X 2‐1/2" 38.3 15021.8 17524.2 150

1/2 X 4‐1/2"1/2 X 5" 3/4 X 3

3/4 X‐1/2" 3" 40.5

45.3130120

3/4 X 4" 49.7 10028.8 15032.1 150

1/2 X 6"1/2 X 7"

3/4 X 43/4 X

‐1/2" 5"

54.960.8

10090

37.0 1251/2 X 8" 3/4 X 5‐1/2" 73.2 803/4 X3/4 X

57.3 12067.5 90

3/4 X 8"3/4 X 9"

76.5 80 112.8 503/4 X 10"

3/4 X 12"3/4 X 11" 131.0

141.05040

3/4 X 14" 162.0 4022.3 24026.7 200

‐1/2" 3"

3/4 X 16"3/4 X 18"

183.0204.0

3530

3/4 X 20" 254.0 25

[email protected]

1.06 100 2000#10 X 1‐1/2"

Page 22 Section V Page 22 Section V

100 900

*Available in different diameters and lengths


SELF DRILLING SCREWS, HEX HEAD WASHERFigure SDTS

ScrewSize

WGT100 PCS

BoxQuantity

Case Quantity

#6 X 3/8" 0.20 100 2500#6 X 1/2" 0.26 100 2500#6 X 3/4" 0.30 100 2500#8 X 1/2" 0.36 100 2500#8 X 5/8" 0.40 100 2500#8 X 3/4" 0.47 100 2500#8 X 1" 0.58 100 2500

#8 X 1‐1/4" 0.68 100 2500#8 X 1‐1/2" 0.80 100 2000#10 X 1/2" 0.51 100 2500#10 X 5/8"#10 X 3/4"

0.590.65

100100

25002500

#10 X 1" 0.80 100 2500#10 X 1‐1/4" 0.92 100 2000

1.34#10 X 2"#12 X 0.89 100 25003/4"#12 X 1" 1.08 100 2000

#12 X 1‐1/4" 1.25 100 2000#12 X 1‐1/2" 1.44 100 1200#12 X 2"#14 X 3/4"

1.771.35

100100

9002000

#14 X 1" 1.65 100 1200#14 X 1‐1/4" 1.86 100 1200#14 X 1‐1/2" 2.08 100 900#14 X 1‐3/4" 2.37 100 600

Available Finishes #14 X 2" 2.86 100 600Electro Zinc #14 X 3" 2.80 100 600


SELF DRILLING SCREWS, HEX HEADWITH NEOPRENE WASHERFigure SDTSN


Available FinishesElectro Zinc

#10 X 1

ScrewSize

#10 X#10 X#10

#14 #14 X 1#14 X 1

#10 #12 X#12

#12 X 1#12 X 1#14 X

Section V Page 23Section V Page 23


1.50 1001.95 100

STEEL DRIVE SCREW


WGT Box Case 100 PCS Quantity Quantity0.59 5/8" 100 20000.65 3/4" 100 12001.07X 1" 100 12001.30‐1/2" 100 9001.34X 2" 100 9000.89 3/4" 100 12001.08X 1" 100 12001.25‐1/4" 100 9001.44‐1/2" 100 9001.23 3/4" 100 12001.5X 1" 100 9001.69‐1/4" 100 9001.89‐1/2" 100 600

Figure 166ScrewSize

#12 X 1‐1/2"#16 X 2"

[email protected]


Figure DWSBox Case

Quantity Quantity100 2500100 2400100 2500100 2400100 2400100 2400100 2400100 1800

Available Finishes 100 1200Black Phosphate 100 600

100 600

Figure DWSF

DRYWALL SCREWS, PHILLIPS, COARSE

#10 X 3#10

DRYWALL SCREWS, PHILLIPS, FINE

ScrewSize

#6 X#6 X 1#6 X 1#6 X 1#6 X

#6 X 2#7 X

#8 X 2#8 X

Page 24 Section VPage 24 Section V

Figure DWSFBox Case

Quantity Quantity100 2400100 2400100 2000100 2400100 2400100 2400

Available Finishes 100 1800Black Phosphate 100 1800#8 X

ScrewSize

#6 X#6 X 1#6 X 1#6 X 1#6 X

#6 X 2#8 X 2

WGT100 PCS0.350.380.400.450.640.630.850.931.092.202.50

‐1/2"X 4"

1"‐1/8"‐1/4"‐5/8" 2"‐1/4" 2"‐1/2" 3"

WGT100 PCS0.350.360.400.540.640.691.041.30 3"

1"‐1/8"‐1/4"‐5/8" 2"‐1/4"‐1/2"


Section VI Page 25Section VI Page 25

400

8.2 7009.4 60010.8 5003/8 X 4-1/2"

X

3/8 X 3-1/2"3/8 X 4"

Construction Fasteners Rods

LAG RODFigure 28

WGT BoxRodSize 100 PCS Quantity

1/4 X 1-1/2" 1.4 45001/4 X 2" 1.9 3000

1/4 X 2-1/2" 2.4 20001/4 X 3"

1/4 X 3-1/2"2.93.4

17501250

1/4 X 4" 3.9 10001/4 X 5" 4.9 6001/4 X 6" 5.9 500

5/16 X 1-1/2" 2.2 30005/16 X 2" 3.1 2000

5/16 X 2-1/2"5/16 X 3"

3.94.7

15001250

5/16 X 3-1/2" 5.4 10005/16 X 4" 6.5 8005/16 X 5" 7.9 5005/165 X 6"/16 6" 9 89.8 4003/8 X 2" 4.5 1500

3/8 X 2-1/2"3/8 X 3"

5.67.0

1100900

11.8 4003/8 X 5"13.0 35014.2 250

3/8 X 5-1/2"3/8 X 6"3/8 X 8" 19.0 2003/8 X 10" 23.8 2003/8 X 12" 28.6 2003/8 X 14" 33.6 200


1/2 X 6"1/2 X 7"

25.329.7

100100

1/2 X 8" 34.8 100Available Finishes 1/2 X 10" 42.9 100Plain, Electro Zinc, & Painted 1/2 X 12" 52.1 100

[email protected]


ALL THREAD ROD 6', 10' & 12'Figure 94

RodSize1/4"5/16"3/8"7/16"1/2"5/8"3/4"7/8"1"

1‐1/8"1‐1/4"1‐3/8"

Available Finishes 1‐1/2"Plain, Electro Zinc, Hot Dipped Galvanized 1‐3/4"Stainless 304 & Stainless 316 2"

Page 26 Section VIPage 26 Section VI

B7 THREAD RODFigure 94 B7

RodSize1/4"3/8"1/2"5/8"3/4"7/8"1"

1‐1/8"Available Finishes 1‐1/4"Plain 1‐1/2"

Rods

WGT 6' Tube100 FT Quantity12.1 30019.6 21029.1 15039.8 10252.2 9083.7 54122.4 36169.2 24220.4 18280.5 12350.0 6417.0 6505.0 6690.0 6904.0 6

WGT 6' Tube100 FT Quantity12.0 30030.0 15054.0 9085.0 54120.0 36170.0 24230.0 18280.0 12350.0 6500.0 6


ALL THREAD STUDSFigure 94SFigure 94S B7 Pipe

Size1/2"3/4"1"

1‐1/4"1‐1/2"2"

2‐1/2"3"

5"6"8"10"

12"


14"16"18"20"22"24"26"30"

Plain, Electro Zinc, Hot Dipped Galvanized 36"

COPPER STUDSFigure 94S CT

WGT BoxAvailable Finishes 100 PCS QuantityCopper Plated 24.9 50

RodSize

3/8 X 3"


Standard Stud Standard Stud150 LB Flange 300 LB Flange1/2 X 2‐1/4" 1/2 X 2‐1/2"1/2 X 2‐1/4" 5/8 X 2‐3/4"1/2 X 2‐1/2" 5/8 X 3"1/2 X 2‐1/2" 5/8 X 3"1/2 X 2‐3/4" 3/4 X 3‐1/2"5/8 X 3" 5/8 X 3‐1/4"

5/8 X 3‐1/4" 3/4 X 3‐3/4"5/8 X 3‐1/2" 3/4 X 4"

3‐1/2" 5/8 X 3‐1/2" 3/4 X 4‐1/4"4" 5/8 X 3‐1/2" 3/4 X 4‐1/4"

3/4 X 3‐3/4" 3/4 X 4‐1/2"3/4 X 3‐3/4" 3/4 X 4‐3/4"3/4 X 4" 7/8 X 5‐1/4"

7/8 X 4‐1/2" 1 X 6"7/8 X 4‐1/2" 1‐1/8 X 6‐1/2"

1 X 5" 1‐1/8 X 6‐3/4"1 X 5‐1/4" 1‐1/4 X 7‐1/4"

1‐1/8 X 5‐3/4" 1‐1/4 X 7‐1/2"1‐1/8 X 6" 1‐1/4 X 8"

1‐1/4 X 6‐1/2" 1‐1/2 X 8‐3/4"1‐1/4 X 6‐3/4" 1‐1/2 X 9"1‐1/4 X 7" 1‐5/8 X 10"

1‐1/4 X 7‐1/4" 1‐3/4 X 11‐3/4"34" 1‐1/2 X 8" 1‐7/8 X 12‐1/4"Available Finishes

1‐1/2 X 8‐1/4" 2 X 12‐3/4Stainless 304 & Stainless 316 42" 1‐1/2 X 8‐1/2" 2 X 13‐64"

[email protected]


562 X 10"


MACHINE THREADED RODSFigure 133

THREAD WGTRodLENGTH 100 PCSSize

3" 253/8 X 8"3" 323/8 X 10"3" 383/8 X 12"3" 443/8 X 14"3" 573/8 X 18"3" 763/8 X 24"3" 943/8 X 30"3" 1203/8 X 36"

3" 1403/8 X 42" 3" 1503/8 X 48"

3" 1703/8 X 54"3" 1903/8 X 60"3" 2103/8 X 66"3" 2303/8 X 72"3" 441/2 X 8"3" 561/2 X 10" 3"1/ 3" 671/2 X 12"3" 781/2 X 14"3" 1001/2 X 18"3" 1401/2 X 24"3" 1701/2 X 30"3" 2001/2 X 36"3" 2401/2 X 42"

*Available in different 3" 2501/2 X 48"diameters and lengths 3" 3101/2 X 54"

3" 3401/2 X 60"Available Finishes 3" 3701/2 X 66"Plain, Electro Zinc, Hot Dipped Galvanized & Painted 3" 4101/2X 72"



3 87 4 873/4 X 10 1 X 10

Construction Fasteners RodsMACHINE THREADED RODS

Rod THREAD WGT Rod THREAD WGTSize LENGTH 100 PCS Size LENGTH 100 PCS

5/8 X 8" 3" 69 7/8 X 8" 4" 695/8 X 10" 3" 87 7/8 X 10" 4" 875/8 X 12" 3" 110 7/8 X 12" 4" 1105/8 X 14" 3" 130 7/8 X 14" 4" 1305/8 X 18" 3" 160 7/8 X 18" 4" 1605/8 X 24" 3" 210 7/8 X 24" 4" 2105/8 X 30" 3" 160 7/8 X 30" 4" 1605/8 X 36" 3" 320 7/8 X 36" 4" 3205/8 X 42" 3" 370 7/8 X 42" 4" 3705/8 X 48" 3" 420 7/8 X 48" 4" 4205/8 X 54" 3" 470 7/8 X 54" 4" 4705/8 X 60" 3" 520 7/8 X 60" 4" 5205/8 X 66" 3" 580 7/8 X 66" 4" 5805/8 X 72" 3" 630 7/8 X 72" 4" 6303/4 X 8" 3" 69 1 X 8" 4" 693/4 X 10" 3" 87 1 X 10" 4" 873/4 X 12" 3" 110 1 X 12" 4" 1103/4 X 14" 3" 130 1 X 14" 4" 1303/4 X 18" 3" 160 1 X 18" 4" 1603/4 X 24" 3" 210 1 X 24" 4" 2103/4 X 30" 3" 160 1 X 30" 4" 1603/4 X 36" 3" 320 1 X 36" 4" 3203/4 X 42" 3" 370 1 X 42" 4" 3703/4 X 48" 3" 420 1 X 48" 4" 4203/4 X 54" 3" 470 1 X 54" 4" 4703/4 X 60" 3" 520 1 X 60" 4" 5203/4 X 66" 3" 580 1 X 66" 4" 5803/4 X 72" 3" 630 1 X 72" 4" 630

[email protected]



EYE RODS (UNWELDED)Figure 33

Rod THREAD WGTSize LENGTH 100 PCS

3/8 X 8" 2‐1/2" 323/8 X 10" 2‐1/2" 383/8 X 12" 2‐1/2" 453/8 X 14" 2‐1/2" 513/8 X 18" 2‐1/2" 643/8 X 24" 2‐1/2" 823/8 X 30" 2‐1/2" 1103/8 X 36" 2‐1/2" 120

3/8 X 42" 2‐1/2" 140 3/8 X 48" 2‐1/2" 180

3/8 X 54" 2‐1/2" 1803/8 X 60" 2‐1/2" 2003/8 X 66" 2‐1/2" 2203/8 X 72" 2‐1/2" 2401/2 X 8" 2‐1/2" 601/2 X 10" 2‐1/2" 711/2 X 12" 2‐1/2" 821/2 X 14" 2‐1/2" 941/2 X 18" 2‐1/2" 1201/2 X 24" 2‐1/2" 1501/2 X 30" 2‐1/2" 1901/2 X 36" 2‐1/2" 2201/2 X 42" 2‐1/2" 250

*Available in different 1/2 X 48" 2‐1/2" 190diameters and lengths 1/2 X 54" 2‐1/2" 320

1/2 X 60" 2‐1/2" 350Available Finishes 1/2 X 66" 2‐1/2" 390Plain, Electro Zinc, Hot Dipped Galvanized & Painted 1/2X 72" 2‐1/2" 410




EYE RODS (UNWELDED)

Rod THREAD WGT Rod THREAD WGTSize LENGTH 100 PCS Size LENGTH 100 PCS

5/8 X 8" 2‐1/2" 98 7/8 X 8" 3‐1/2" 2105/8 X 10" 2‐1/2" 120 7/8 X 10" 3‐1/2" 2405/8 X 12" 2‐1/2" 140 7/8 X 12" 3‐1/2" 2805/8 X 14" 2‐1/2" 150 7/8 X 14" 3‐1/2" 3105/8 X 18" 2‐1/2" 190 7/8 X 18" 3‐1/2" 3805/8 X 24" 2‐1/2" 240 7/8 X 24" 3‐1/2" 4805/8 X 30" 2‐1/2" 290 7/8 X 30" 3‐1/2" 5805/8 X 36" 2‐1/2" 340 7/8 X 36" 3‐1/2" 6805/8 X 42" 2‐1/2" 400 7/8 X 42" 3‐1/2" 7905/8 X 48" 2‐1/2" 450 7/8 X 48" 3‐1/2" 8905/8 X 54" 2‐1/2" 500 7/8 X 54" 3‐1/2" 9905/8 X 60" 2‐1/2" 550 7/8 X 60" 3‐1/2" 11005/8 X 66" 2‐1/2" 600 7/8 X 66" 3‐1/2" 12005/8 X 72" 2‐1/2" 660 7/8 X 72" 3‐1/2" 13003/4 X 8" 3" 150 1 X 8" 4" 300/3/4 X 10" 3" 170 1 X 10" 4" 3503/4 X 12" 3" 200 1 X 12" 4" 3903/4 X 14" 3" 220 1 X 14" 4" 4403/4 X 18" 3" 270 1 X 18" 4" 5303/4 X 24" 3" 350 1 X 24" 4" 6803/4 X 30" 3" 420 1 X 30" 4" 8203/4 X 36" 3" 500 1 X 36" 4" 9303/4 X 42" 3" 570 1 X 42" 4" 11003/4 X 48" 3" 560 1 X 48" 4" 12003/4 X 54" 3" 720 1 X 54" 4" 14003/4 X 60" 3" 800 1 X 60" 4" 15003/4 X 66" 3" 870 1 X 66" 4" 16003/4 X 72" 3" 950 1 X 72" 4" 1800

[email protected]



WELDED EYE RODSFigure 93

THREAD WGTRodLENGTH 100 PCSSize2‐1/2" 323/8 X 8"2‐1/2" 383/8 X 10"2‐1/2" 453/8 X 12"2‐1/2" 513/8 X 14"2‐1/2" 643/8 X 18"2‐1/2" 823/8 X 24"2‐1/2" 1103/8 X 30"2‐1/2" 1203/8 X 36"

2‐1/2" 1403/8 X 42" 2‐1/2" 1803/8 X 48"

2‐1/2" 1803/8 X 54"2‐1/2" 2003/8 X 60"2‐1/2" 2203/8 X 66"2‐1/2" 2403/8 X 72"2‐1/2" 601/2 X 8"2‐1/2" 711/2 X 10"2‐1/2" 821/2 X 12"2‐1/2" 941/2 X 14"2‐1/2" 1201/2 X 18"2‐1/2" 1501/2 X 24"2‐1/2" 1901/2 X 30"2‐1/2" 2201/2 X 36"2‐1/2" 2501/2 X 42"

*Available in different 2‐1/2" 1901/2 X 48"diameters and lengths 2‐1/2" 3201/2 X 54"

2‐1/2" 3501/2 X 60"Available Finishes 2‐1/2" 3901/2 X 66"Plain, Electro Zinc, Hot Dipped Galvanized & Painted 2‐1/2" 4101/2X 72"


Rod


3" 870 4" 16003" 950 4" 1800

3/4 X 66" 1 X 66"3/4 X 72" 1 X 72"


WELDED EYE RODS

THREAD WGT THREAD WGTRodLENGTH 100 PCSSize Size LENGTH 100 PCS2‐1/2" 985/8 X 8" 7/8 X 8" 3‐1/2" 2102‐1/2" 1205/8 X 10" 7/8 X 10" 3‐1/2" 2402‐1/2" 1405/8 X 12" 7/8 X 12" 3‐1/2" 2802‐1/2" 1505/8 X 14" 7/8 X 14" 3‐1/2" 3102‐1/2" 1902‐1/2" 240

5/8 X 18" 7/8 X5/8 X 24" 7/8 X

18" 24"

3‐1/2"3‐1/2"

380480

2‐1/2" 2905/8 X 30" 7/8 X 30" 3‐1/2" 5802‐1/2" 3405/8 X 36" 7/8 X 36" 3‐1/2" 6802‐1/2" 4005/8 X 42" 7/8 X 42" 3‐1/2" 7902‐1/2" 4505/8 X 48" 7/8 X 48" 3‐1/2" 8902‐1/2" 5005/8 X 54" 7/8 X 54" 3‐1/2" 9902‐1/2" 5505/8 X 60" 7/8 X 60" 3‐1/2" 11002‐1/2" 6005/8 X 66" 7/8 X 66" 3‐1/2" 12002‐1/2" 6603" 150

5/8 X 72" 7/8 X3/4 X 8" 1 X

72" 8"

3‐1/2"4"

1300300

/ 3" 1703/4 X 10" 1 X 10" 4" 3503" 2003/4 X 12" 1 X 12" 4" 3903" 2203/4 X 14" 1 X 14" 4" 4403" 2703/4 X 18" 1 X 18" 4" 5303" 3503/4 X 24" 1 X 24" 4" 6803" 4203/4 X 30" 1 X 30" 4" 8203" 5003/4 X 36" 1 X 36" 4" 9303"3/4 X

3/4 X 570

3" 56042" 1 X 48" 1 X

42"48"

4"4"

11001200

3"3/4 X 72054" 1 X 54" 4" 14003"3/4 X 80060" 1 X 60" 4" 1500

[email protected]

Figure 283

14" 7/8" 830 Bulk

Page 34 Section VIIPage 34 Section VII

14" 7/8" 830 Bulk

Construction Fasteners U-Bolts

U-BOLTS

Pipe Rod WGT BoxSize Diameter 100 PCS Quantity1/2" 1/4" 11 1003/4" 1/4" 12 1001" 1/4" 12 100

1-1/4" 3/8" 28 1001-1/2" 3/8" 30 100

2" 3/8" 33 1002-1/2" 1/2" 70 50

3" 1/2" 78 503-1/2" 1/2" 84 25

4" 1/2" 90 255" 1/2" 104 256" 5/8" 200 208" 5/8" 230 1010" 3/4" 490 512" 7/8" 770 Bulk

16" 7/8" 920 Bulk18" 1" 1350 Bulk20" 1" 1460 Bulk

1690Available Finishes 24" 1" BulkPlain, Electro Zinc, Hot Dipped Galvanized 30" 1" 1910 BulkPVC, Stainless 304 & Stainless 316 36" 1" 2320 Bulk


2" 1/4" 10 1002-1/2" 3/8" 28 50

Available FinishesPlain, Electro Zinc, Hot Dipped GalvanizedPVC, Stainless 304 & Stainless 316

Section VII Page 35Section VII Page 35

U-BOLTS FOR DUCTILE IRON PIPEFigure 283DI

WGT Box

12" 7/8" 764 Bulk14" 7/8" 820 Bulk16" 7/8" 870 Bulk

1350 Bulk

Available FinishesPlain, Electro Zinc, Hot Dipped Galvanized

Construction Fasteners U-Bolts

LIGHT DUTY U-BOLTSFigure 283LD

PipeSize

RodDiameter

WGT100 PCS

BoxQuantity

1/2" 1/4" 6 1003/4" 1/4" 7 1001" 1/4" 7 100

1-1/4" 1/4" 8 1001-1/2" 1/4" 9 100

3" 3/8" 31 503-1/2" 3/8" 35 25

4" 3/8" 38 255" 3/8" 45 256" 1/2" 95 208" 1/2" 120 1010" 5/8" 230 5

Pipe RodSize Diameter 100 PCS Quantity3" 1/2" 99 504" 1/2" 115 256" 5/8" 239 208" 5/8" 400 1010" 3/4" 479 5

18" 1"20" 1" 1460 Bulk24" 1" 1710 Bulk30" Bulk

[email protected]

TOGGLE BOLTS WITH WINGS

7.0 501/4 X 4"

Page 36 Section VIIPage 36 Section VII

25

42.0 2550.0 251/2 X 6"

8

1/2 X 4"

Construction Fasteners Wall Anchors

Figure 59WGT Box

100 PCS QuantityBoltSize

1/8 X 2" 1.5 501/8 X 3" 1.8 501/8 X3/16

4" X 2"

2.03.3

5050

3/16 X 3" 4.5 503/163/16

X 4" X 5"

5.05.0

5050

6.5 501/4 X 3"

8.0 509.0 501/4 X 6"

1/4 X 5"

7.0 505/16 X 3"5/165/16

X 4" X 5"

11.613.2

2525

5/16 X 6" 14.8 253/83/ XX 3" 3" 8 88.8 253/8 X3/8 X

4" 5"

15.320.1

2525

3/8 X 6" 22.5 251/2 X 3" 35.0 25

TOGGLE WINGSFigure 5

Bolt WGT CaseSize1/8"

100 PCS0.7

Quantity3250

3/16" 1.9 14501/4" 2.5 8005/16"3/8"

4.25.5

500300

1/2" 6.5 100


TOGGLER

Section VIII Page 37Section VIII Page 37

WGT Box Case 100 PCS Quantity Quantity

Available FinishesChrome & White Head

Figure WALLDOGO

Available Finishes

WALL DOG "PAN HEAD"

WALL DOG "OVAL HEAD"

ScrewSize


STRAP-TOGGLEFigure STOGGLE

Anchor WGT Box CaseSize 100 PCS Quantity Quantity

3/16 X 4"1/4 X 4"

3.53.5

5050

300300

3/8 X 4" 5.0 25 1501/2 X 4" 5.0 25 150

Figure TOGGLERWGT Box CaseAnchor

Size 100 PCS Quantity Quantity3/16 X 4" 3.5 100 5001/4 X 4" 3.5 100 5003/8 X 4" 5.0 25 2501/2 X 4" 5.0 25 250

Figure WALLDOGP

0.35 100 10003/16 X 1‐1/4"

Screw WGT Box Case Size 100 PCS Quantity Quantity

3/16 X 1‐1/4" 0.35 100 1000Chrome & White Head

[email protected]

1.3 100 10002.0 100 1000

* With #8 x 1" screws 2.5 100 1000

TypeNylonNylon Zip‐It*Zinc Zip‐ItZinc Zip‐It*

Page 38 Section VIIIPage 38 Section VIII


E-Z ANCHORFigure EZ25

WGT Box CaseAnchorType 100 PCS Quantity Quantity

Zinc E‐Z 1.6 100 1000Plastic E‐Z 0.1 100 1000

* With #8 x 1‐1/4" Screws 25 Zinc Anchors * 0.9 1 10

ZIP-ITFigure EZ / EZP

Anchor WGT Box Case100 PCS Quantity Quantity

0.5 100 1000 Zip‐It

DRYWALL ANCHORFigure HSP / HFP

WGT BoxAnchor Case100 PCS Quantity

0.5 100Type

HSP ZincQuantity1000

1.3 100HSP Zinc* 10002.0 100HFP Nylon 1000

* With #8 x 1‐3/16" screws 2.5 100HFP Nylon* 1000


POLY-SET ANCHORS

6.0 100 10001.0 100 10006‐8 X 3/4" Kit

14‐16 X 1‐1/2"

Section VIII Page 39Section VIII Page 39

1.0 100 10001.5 100 1000

Kit includes screws and

6 8 X 3/4 Kit8‐10 X 7/8" Kit


Figure PSA & PSAKWGT Box Case

100 PCS Quantity QuantityAnchor

Size3/16 X 1‐1/4"9/32 X 1‐7/16"

0.91.8

100100

10001000

3/16 X 1‐1/4" Kit 1.1 1 / 100 10Kit includes screws and drill bit 9/32 X 1‐7/16" Kit 1.2 1 / 50 10

BANTAM PLUGFigure PBK

Anchor WGT Box CaseSize 100 PCS Quantity Quantity

6‐8 X 3/4"8‐10 X 7/8"

1.01.5

100100

10001000

10‐12 X 1" 3.0 100 1000

drill bit 3.0 100 100010‐12 X 1" Kit

UNIVERSAL PLASTIC ANCHORFigure HUD-1

WGT BoxAnchor Case100 PCS QuantitySize Quantity

1.0 5001.5 500

3/16 X 1"1/4 X 1‐3/16"

10001000

3.0 4005/16 X 1‐5/8" 1000 6.0 200

1.0 1003/8 X 2"

3/16 X 1" Kit10001000

Kit includes screws and drill bit 1.5 1001/4 X 1‐3/16" Kit 1000

[email protected]

Figure BANGITAnchor

Size1/4"3/8"1/2"5/8"3/4"7/8"

CAST-IN ANCHORFigure HCI-MD

3/16"1‐

Page 40 Section IXPage 40 Section IX

Construction Fasteners Cast-In Anchors

BANG-IT

Anchor Box PalletColor Quantity QuantityBrown 100 4000Green 100 4000Yellow 100 4000Red 50 2400

Purple 50 2400Black 50 2400 Carbide Hole Saw

3/16" Carbide Hole Saw

Anchor BoxSize Quantity1/4"1/4 1001003/8" 1001/2" 605/8" 603/4" 60


WOOD-KNOCKERFigure WK

Brown 200 9600

* Coil Thread

CAST-IN ANCHORFigure HCI-WF

Secton IX Page 41Secton IX Page 41

3/8


Anchor Anchor Box PalletSize Color Quantity Quantity1/4"3/8" Green 200 96001/2" Yellow 200 96005/8" Red 150 60003/4" Purple 150 6000*1/2" Yellow 200 9600*3/4" Purple 150 6000

Anchor BoxSize Quantity1/4" 1503/8" 1501501/2" 1005/8" 1003/4" 100

[email protected]

40.0

81.099.0

3/8 X 10"

5/8 X 6"5/8 X 8"

Page 42 Section IXPage 42 Section IX

150.0190.0

*Available in different

Plain, Electro Zinc, Hot Dipped Galvanized & Painted 330.01 X 12"

7/8 X 6"7/8 X 8"


ANCHOR BOLTFigure 177

Bolt WGTSize 100 PCS

3/8 X 6" 28.03/8 X 8" 34.0

46.03/8 X 12"52.01/2 X 6"

1/2 X 8" 63.01/2 X 10" 74.01/2 X 12" 85.0

1.25/8 X 10"134.05/8 X 12"

3/4 X 6" 119.03/4 X 8" 144.03/4 X 10" 169.03/4 X 12" 194.0

220.07/8 X 10"260.07/8 X 12"

diameters and lengths 1 X 6" 200.01 X 8" 240.0

Available Finishes 1 X 10" 290.0


HAMMER SET ANCHORS

HAMMER-SET ANCHORSFigure RHS

2.4 100 1000

1/4 X 2"1/4 X 1‐1/2"

Anchor

1/4 X 1"

1/4 X 1‐1/4"

Size3/16 X 7/8"1/4 X 3/4"1/4 X 1"

Section X Page 43Section X Page 43

2.4 100 10002.6 100 1000

1/4 X 11/4 X 1‐1/4"

Construction Fasteners Concrete Anchors

Figure HSAWGT Box CaseAnchor

100 PCS Quantity Quantity2.0 1002.2 100

10001000

2.4 100 10002.6 100 10002.8 100 10003.5 100 1000

WGT Box CaseSize 100 PCS Quantity Quantity

3/16 X 7/8"1/4 X 3/4"

2.0 1002.2 100

10001000

2.8 100 10001/4 X 1‐1/2"3.5 100 10001/4 X 2"

ZAMAC NAILINFigure PZN

WGTAnchor Box Case100 PC

0.83/16 X 7/8"Size S Quantity Quantity

100 5001.51/4 X 3/4" 100 5001.81/4 X 1" 100 5002.31/4 X 1‐1/4" 100 5002.53.0

1/4 X 1‐1/2"1/4 X 2"

100 500100 500

NYLON NAILINFigure PNN

WGTAnchor Box Case100 PCSize S Quantity Quantity

0.53/16 X 1" 100 10000.70.8

3/16 X 1‐1/2"1/4 X 1"

100 1000100 1000

1.01/4 X 1‐1/2" 100 10001.01/4 X 2" 100 1000

[email protected]

Page 44 Section XPage 44 Section X


SETTING TOOLFigure ST

Rod WGTSize 100 PCS1/4" 12.53/8" 27.51/2" 39.05/8" 45.0

*Used with Standard or Lipped Drop‐Ins 3/4" 110.0

SETTING TOOLFigure STS

Rod WGTSize 100 PCS1/4" 27.53/8" 39.0

*Used with Mini Drop‐Ins 1/2" 45.0

SETTING TOOLFigure HSAT & SHSAT

Rod WGTSize 100 PCS1/4" 20.53/8" 33.51/2" 42.5

*Used with Hollow Set Anchors 5/8" 50.0

SETTING TOOLFigure SIF

Rod WGTSize 100 PCS3/8" 35.01/2" 40.0

*Requires Hammer Drill



Bit


CARBIDE SDS DRILL BITSFigure SDSBIT

WGTBit100 PCSSize

8.35/32 X 6"8.43/16 X 6"10.31/4 X 6"12.455/16 X 6"16.63/8 X 6"22.81/2 X 6"37.35/8 X 8"41.53/4 X 8"

68.47/8 X 8" 78.81 X 8"

S-4 PLUS SDSFigure S4+SDS

Bit LengthsLengthsSize Aviable5/32" 6"3/16" 4, 5, 6, 8, 10, 12 & 14"7/32" 6, 8, 11, 14 &16"1/4" 4, 6, 8, 11, 14, 16 & 20"5/16" 6 & 12"3/8" 6, 8, 12, 18 & 24"7/16" 6 & 12"1/2" 6, 10, 12, 18 & 24"9/16" 6 & 10"5/8" 8, 12 & 18"

11/16" 8 & 12"3/4" 8, 12 & 18"

27/32" 8"7/8" 8, 12 & 16"1" 8, 10, 12 & 18"

[email protected]

MULTI-SET II

Part Rod WGT Box CaseNumber Size 100 PCS Quantity Quantity


STEEL DROPINFigure PDI

Number Size 100 PCS Quantity Quantity6304 1/4" 2.0 100 1000

DROP-IN ANCHOR



DROP-IN ANCHORFigure 514

RodSize

WGT100 PCS

BoxQuantity

CaseQuantity

1/4" 2.6 100 10003/8" 6.8 50 5001/2" 11.6 50 400

Available Finishes 5/8" 31.2 25 125Electro Zinc, Stainless 304 & Stainless 316 3/4" 50.0 10 100

Figure RDI

RL-14 1/4" 2.6 100 1000RL-38 3/8" 6.8 50 500RL-12 1/2" 11.6 50 400RL-58 5/8" 31.2 25 125RL-34 3/4" 50.0 25 100

Part Rod WGT Box Case

6306 3/8" 6.0 50 5006308 1/2" 12.0 50 2506320 5/8" 32.0 25 1256312 3/4" 48.0 10 50

Figure HDI

336425 1/4" 2.6 100 1200336426 3/8" 6.8 50 600336427 1/2" 11.6 50 300336428 5/8" 31.2 25 100336429 3/4" 50.0 25 100


MULTI-SET II




6324 1/4" 2.0 100 1000

283609 3/8" 6.8 50 600283610 1/2" 11.6 50 300

Figure PDIL


DROP-IN ANCHOR LIPPEDFigure 514L

Rod WGT Box CaseSize1/4"

100 PCS2.6

Quantity100

Quantity1000

3/8" 6.8 50 5001/2" 11.6 50 400

Available Finishes 5/8" 31.2 25 125Electro Zinc, Stainless 304 & Stainless 316 3/4" 49.0 10 100

Figure RDIL

Number Size 100 PCS Quantity QuantityRM-14RM-38

1/4"3/8"

2.66.8

10050

1000500

RM-12 1/2" 11.6 50 400RM-58 5/8" 31.2 25 125RM-34 3/4" 49.0 25 100

STEEL DROPIN

Number Size 100 PCS Quantity Quantity

6326 3/8" 6.0 50 5006328 1/2" 12.0 50 250

DROP-IN ANCHORFigure HDIL

Part Rod WGT Box CaseNumber Size 100 PCS Quantity Quantity283608 1/4" 2.6 100 1200

[email protected]

Figure 514S


MULTI-SET II

STEEL DROPIN

Figure RDIS

Figure PDIS


DROP-IN ANCHOR

6.0 100 1200

Figure PDIS

Figure HDIP


DROP-IN ANCHOR MINI

Rod WGT Box CaseSize 100 PCS Quantity Quantity1/4" 2.4 100 10003/8" 3.5 50 10001/2" 6.0 50 500

Part Rod WGT Box CaseNumber Size 100 PCS Quantity QuantityRX-38 3/8" 3.5 100 1000RX-12 3/8" 6.0 50 500


6335 1/4" 2.0 100 10006322 3/8" 6.0 100 10006337 1/2" 12.0 50 500

Part Rod WGT Box CaseNumber Size 100 PCS Quantity Quantity283611 3/8"



HOLLOW SET ANCHORFigure HSA

WGT Box Case100 PCS Quantity Quantity

1.8 100 10005.5 100 500

Available Finishes 5.5 100 500Electro Zinc 9.5 100 100

21.0 100 100

SINGLE EXPANSION ANCHOR


3.8 50 2505.5 50 2505.3 50 25015.3 25 125

Figure SEA


15.3 25 125Available Finishes 24.0 25 125Electro Zinc 43.0 10 100

DOUBLE EXPANSION ANCHOR


4.0 50 2507.5 50 25012.5 50 25018.0 25 125

Available Finishes 25.5 25 125Electro Zinc 54.5 10 100

Figure DES

Concrete Anchors

Part RodNumber Size

9320 1/4"9330 5/16"9340 3/8"9350 1/2"9360 5/8"

Part RodNumber Size

9650 1/4"9655 5/16"9665 3/8"9675 1/2"9675 1/29685 5/8"9695 3/4"

Part RodNumber Size

9510 1/4"9515 5/16"9520 3/8"9525 1/2"9530 5/8"9535 3/4"

[email protected]



EXPANSION BOLTFigure EB

Bolt WGT Box CaseSize 100 PCS Quantity Quantity

1/4 X 1-3/4"1/4 X 2-1/4"

3.03.5

100100

500500

1/4 X 3-1/4" 4.8 100 5003/8 X 2-1/4" 8.8 50 2503/8 X 2-3/4" 9.5 50 250

3/8 X 3" 10.8 50 2503/8 X 3-1/2" 12.0 50 2503/8 X 3-3/4" 12.8 50 250

3/8 X 5" 15.5 50 2503/8 X 7" 21.0 50 200

1/2 X 2-3/4" 18.0 50 2001/2 X 3-3/4" 23.0 50 2001/2 X 4-1/2" 28.0 50 2001/2 X 5-1/2" 32.0 50 150

1/2 X 7" 44.0 50 1001/2 X 8-1/2" 46.0 50 1005/8 X 3-1/2"5/8 X 4-1/2"

40.054.0

2525

100100

5/8 X 5" 57.0 25 1005/8 X 6" 64.0 25 755/8 X 7" 72.0 25 75

5/8 X 8-1/2" 84.0 25 755/8 X 10" 100.0 25 75

3/4 X 4-1/4" 70.0 20 603/4 X 4-3/4" 76.0 20 603/4 X 5-1/2" 85.0 20 603/4 X 6-1/4" 95.0 20 60

3/4 X 7" 105.0 20 603/4 X 8-1/2" 120.0 20 40

3/4 X 10" 135.0 20 303/4 X 12" 155.0 20 307/8 X 6"7/8 X 8"

120.0160.0

1010

4040

7/8 X 10" 200.0 10 301 X 6" 170.0 10 301 X 9" 240.0 10 30

Available Finishes 1 X 12" 300.0 5 15Electro Zinc, Hot Dipped Galvanized 1-1/4 X 9" 360.0 5 15Stainless 304 & Stainless 316 1-1/4 X 12" 480.0 5 15


TRUE BOLT WEDGE ANCHOR

100 PCS Quantity Quantity3.1 100 1000

Figure WS

Size1/4 X 1-3/4"



WGT Box CaseBolt

1/4 X 3-1/4"1/4 X 2-1/4" 3.6

4.7100100

1000800

3/8 X 2-1/4"3/8 X 2-3/4"

8.29.4

5050

500400

3/8 X 3" 10.0 50 4003/8 X 3-3/4"

3/8 X 5"11.814.8

5050

300250

3/8 X 7"1/2 X 3-3/4"

20.818.4

5025

250200

1/2 X 3-3/4"1/2 X 4-1/4"

22.824.8

2525

150150

1/2 X 4-1/2" 26.0 25 150

1/2 X 7"1/2 X 5-1/2" 30.8

37.22525

150150

5/8 X 3-1/2"5/8 X 4-1/4"

36.041.0

1010

100100

5/8 X 5" 47.0 10 1005/8 X 6"5/8 X 7"

54.062.0

1010

5030

5/8 X 8-1/2"5/8 X 10"

80.094.0

1010

3030

3/4 X 4-1/4" 68.0 10 603/4 X 4-3/4"3/4 X 5-1/2"

74.081.0

1010

6050

3/4 X 7"3/4 X 6-1/4" 91.0

97.01010

3030

3/4 X 8-1/2"3/4 X 10"

123.0140.0

1010

3030

3/4 X 12" 166.0 10 307/8 X 6"7/8 X 8"

126.0162.0

55

2515

Available Finishes 1 X 6"7/8 X 10" 196.0

166.055

1525

Electro Zinc, Hot Dipped Galvanized 1 X 9" 232.0 5 15Stainless 304 & Stainless 316 1 X 12" 300.0 5 15

[email protected]

POWER-STUD

WGT Box CaseBolt


Available Finishes


Figure PS

Size1/4 X 1-3/4"

100 PCS3.0

Quantity100

Quantity500

1/4 X 2-1/4" 3.5 100 5001/4 X 3-1/4" 4.8 100 5003/8 X 2-1/4"3/8 X 2-3/4"

8.89.5

5050

250250

3/8 X 3" 10.8 50 2503/8 X 3-1/2" 12.0 50 250

3/8 X 5"3/8 X 3-3/4" 12.8

15.55050

250250

3/8 X 7" 21.0 50 2001/2 X 2-3/4" 18.0 50 2001/2 X 3-3/4"1/2 X 4-1/2"

23.028.0

5050

200200

1/2 X 5-1/2" 32.0 50 1501/2 X 7" 44.0 50 100

1/2 X 8-1/2" 46.0 50 1005/8 X 3-1/2"5/8 X 4-1/2"

40.054.0

2525

100100

5/8 X 5" 57.0 25 1005/8 X 6" 64.0 25 755/8 X 7"

5/8 X 8-1/2"72.084.0

2525

7575

5/8 X 10" 100.0 25 753/4 X 4-1/4" 70.0 20 603/4 X 4-3/4"3/4 X 5-1/2"

76.085.0

2020

6060

3/4 X 6-1/4" 95.0 20 603/4 X 7" 105.0 20 60

3/4 X 8-1/2"3/4 X 10"

120.0135.0

2020

4030

3/4 X 12" 155.0 20 307/8 X 6" 120.0 10 407/8 X 8" 160.0 10 407/8 X 10"

1 X 6"200.0170.0

1010

3030

1 X 9" 240.0 10 301 X 12" 300.0 5 15

Electro Zinc, Hot Dipped GalvanizedStainless 304 & Stainless 316

1-1/4 X 9"1-1/4 X 12"

360.0480.0

55

1515



46 0 100

d

3/4 X 1/2"


KWIK BOLT 3 Figure KB


1/4 X 1-3/4" 3.0 100 5001/4 X 2-1/4" 3.5 100 5003/8 X 2-1/4" 4.8 100 500

3/8 X 3" 10.8 50 2503/8 X 3-3/4" 9.5 50 250

3/8 X 5" 10.8 50 2501/2 X 2-3/4" 12.0 50 2501/2 X 3-3/4" 23.0 50 2001/2 X 4-1/2" 28.0 50 2001/2 X 5-1/2" 32.0 50 1505/8 X 3-3/4" 18.0 50 2005/8 X 4-3/4" 23.0 50 200

5/8 X 6" 28.0 50 2005/8 X 7" 32.0 50 150

3/4 X 4-3/4" 44.0 50 1003/4 X 5 1/2" 5- 46 0. 5050 100

Available Finishes 3/4 X 7" 40.0 25 100Electro Zinc, Hot Dipped Galvanize 1 X 6" 54.0 25 100Stainless 304 & Stainless 316 1 X 9" 57.0 25 100

[email protected]



LOK-BOLTFigure LB

Head Style WGT Box CaseBolt Size 100 PCS Quantity Quantity

HN 5/16 X 1-1/2" 4.3 100 1000HN 5/16 X 2-1/2" 5.8 100 500HN 3/8 X 1-7/8" 7.0 50 500

HN 3/8 X 3" 10.0 50 500HN 3/8 X 4" 16.0 50 500

HN 1/2 X 2-1/4" 14.0 25 250HN 1/2 X 3" 17.3 25 250HN 1/2 X 4" 22.0 25 125

HN 1/2 X 5-1/4" 27.0 25 125HN 1/2 X 6" 35.0 10 100

HN 5/8 X 2-1/4" 25.5 25 125HN 5/8 X 3" 34.0 25 125

HN 5/8 X 4-1/4" 41.0 10 100HN 5/8 X 6" 49.0 10 100

HN 3/4 X 2-1/2" 46.0 10 100HN 3/4 X 4" 70.0 10 40

HN 3/4 X 5-3/4" 90.0 10 30HN 3/4 X 7-1/2" 115.0 10 30AN 1/4 X 5/8" 2.0 100 1000

AN 1/4 X 1-3/8" 2.8 100 1000AN 1/4 X 2-1/4" 3.3 100 1000RS 1/4 X 1-1/8" 2.0 100 1000

RS 1/4 X 2" 2.8 100 1000RS 1/4 X 2-3/4" 3.8 100 1000RS 1/4 X 3-3/4" 4.8 100 1000

RS 5/16 X 2-3/8" 4.8 100 1000RS 5/16 X 3-3/8" 6.5 100 500

Available Finishes RS 3/8 X 2-1/2" 8.0 50 500Electro Zinc & Stainless 304 RS 3/8 X 3-3/4" 10.8 50 250


LOK-BOLT

HN AN

Hex NutAcorn Nut

Figure LB


TW Tie‐Wire



FH 1/4 X 1-1/8" 2.0 100 1000FH 1/4 X 2" 2.8 100 1000FH 1/4 X 3" 3.8 100 1000FH 1/4 X 4" 4.5 100 500

FH 1/4 X 5-1/4" 6.5 100 500FH 5/16 X 2-1/2" 4.5 100 1000FH 5/16 X 3-1/2" 6.3 100 500FH 3/8 X 2-3/4 7.5 50 500

FH 3/8 X 4" 10.8 50 250FH 3/8 X 5" 14.0 50 250FH 3/8 X 6" 16.0 50 250

RC 3/8 X 1-1/2" 5.5 50 250RC 3/8 X 1-7/8" 9.0 50 250RC 1/2 X 2-1/4" 21.0 25 125

RS Round Head TH 1/4 X 2" 2.5 100 1000FH Flat Head TW 5/16 X 1-1/2" 5.3 100 1000RC Rod Coupling EX 1/4 X 1" 3.0 100 1000TH Threshold Flat Head EX 5/16 X 1-1/8" 3.0 100 1000

EX 3/8X 1" 3.0 50 500EX Extenders EX 1/2 X 1-3/8" 3.0 25 125

[email protected]

DYNABOLT

WGT Box CaseHead Style


ANHNFSTHRSTW

Acorn NutHex Nut

Phillips Flat HeadThreshold Flat Head

Round HeadTie Wire


Figure DB

Bolt SizeAN 1/4 X 5/8"

100 PCS1.9

Quantity100

Quantity1000

AN 1/4 X 1-3/8" 2.6 100 1000AN 1/4 X 2-1/4" 3.7 100 1000HN 1/4 X 1-3/8" 2.3 100 1000HN 1/4 X 2-1/4"HN 5/16 X 1-1/2"

3.44.0

100100

10001000

HN 5/16 X 2-1/2" 5.9 100 800HN 3/8 X 1-7/8" 7.0 50 500

HN 3/8 X 3" 9.8 50 400HN 1/2 X 2-1/4"

HN 1/2 X 3"13.216.0

2525

250200

HN 1/2 X 4" 21.2 25 200HN 5/8 X 2-1/4" 25.2 25 150

HN 5/8 X 3"HN 5/8 X 4-1/4"

28.0 25 150

HN 5/8 X 6"39.049.0

1010

10050

HN 3/4 X 2-1/2" 47.0 10 50HN 3/4 X 4" 64.0 5 50

HN 3/4 X 6-1/4"FS 1/4 X 1-1/2"

86.01.9

5100

501000

FS 1/4 X 2-1/4" 2.7 100 1000FS 1/4 X 3-1/8" 3.8 100 1000

FS 1/4 X 4" 4.7 100 1000FS 3/8 X 2-7/8"

FS 3/8 X 4"7.610.6

5050

500400

FS 3/8 X 5" 11.2 50 300FS 3/8 X 6" 16.0 50 300

TH 1/4 X 2-1/4" 2.5 100 1000

Available FinishesRS 1/4 X 2-7/8"RS 3/8 X 2-5/8"

3.77.8

10050

1000500

Electro Zinc & Stainless 304 TW 5/16 X 1-1/2" 4.9 100 1000



47.0 10 5064.0 5 50

1.9 100 10002.7 100 1000

H HX FPHT AC RSRC Rod Coupling

Flat Phillips HeadTie‐Wire HeadAcorn Head

Round Head Slotted

Bolt HeadHex Nut

HX 5/8 X 4-1/4"HX 5/8 X 6"

HX 3/4 X 4-1/4"HX 3/4 X 6-1/4"


SLEEVE ANCHORFigure HLC


H 5/16 X 1-5/8" 1.9 100 1000H 5/16 X 2-5/8" 2.6 100 1000H 3/8 X 1-7/8" 3.7 100 1000

H 3/8 X 3" 2.3 100 1000H 1/2 X 2-1/4" 3.4 100 1000

H 1/2 X 3" 4.0 100 1000H 1/2 X 4" 5.9 100 800

HX 5/16 X 1-5/8" 7.0 50 500HX 5/16 X 2-5/8" 9.8 50 400HX 3/8 X 1-7/8" 13.2 25 250

HX 3/8 X 3" 16.0 25 200HX 1/2 X 2-1/4" 21.2 25 200

HX 1/2 X 3" 25.2 25 150HX 1/2 X 4" 28.0 25 150HX 1/2 X 6" 39.0 10 100

HX 5/8 X 2-1/4" 49.0 10 50

86.0 5 50HX 3/4 X 2-1/2"

FPH 1/4 X 1-3/8" 3.8 100 1000FPH 1/4 X 2" 4.7 100 1000FPH 1/4 X 3" 7.6 50 500FPH 1/4 X 4" 10.6 50 400

FPH 3/8 X 2-7/8" 11.2 50 300FPH 3/8 X 4" 16.0 50 300FPH 3/8 X 5" 2.5 100 1000FPH 3/8 X 6" 3.7 100 1000T 1/4 X 1-3/8" 7.8 50 500

AC 1/4 X 1-3/8" 4.9 100 1000AC 1/4 X 2-1/4" 11.2 50 300RS 1/4 X 1-1/4" 16.0 50 300

RS 1/4 X 2" 2.5 100 1000RS 1/4 X 4" 3.7 100 1000

RC 3/8 X 1-7/8" 7.8 50 500Available Finishes RC 1/2 X 2-1/4" 4.9 100 1000Electro Zinc & Stainless 304 RC 5/8 X 2-1/4" 7.8 50 500

[email protected]

WEDGE-BOLT

15.5 50 200

Figure WB

1/2 X 2-1/2"

1/2 X 5"1/2 X 6"


30.0 25 100

Available FinishesElectro Zinc & Stainless 304

3/4 X 6"3/4 X 8"

5/8 X 4"

5/8 X 6"3/4 X 3"3/4 X 4"3/4 X 5"



1/4 X 1-1/4" 2.5 100 5001/4 X 1-3/4" 3.3 100 5001/4 X 2-1/4" 4.3 100 500

1/4 X 3" 5.5 100 5003/8 X 1-3/4" 8.0 50 2503/8 X 2-1/2" 11.0 50 250

3/8 X 3" 12.0 50 2503/8 X 4" 15.0 50 2501/2 X 2" 14.0 50 200

21.0 50 1501/2 X 3"25.0 50 1501/2 X 4"28.0 25 10034.0 25 7528.05/8 X 3" 25 100

39.0 25 755/8 X 5"47.0 25 7548.0 20 6056.0 20 6070.0 20 6086.0 20 60100.0 10 40



9.0 50 6009.5 50 600


3/8 X 2-1/8"3/8 X 2-5/8"

5/8 X 6"

3/8 X 6"1/2 X 2-1/2"

1/2 X 3"1/2 X 4"1/2 X 5"1/2 X 6"5/8 X 3"5/8 X 4"5/8 X 5"


LARGE DIAMETER TAPCON

WGT Box CaseFigure LDT

BoltSize 100 PCS Quantity Quantity

3/8 X 1-3/4" 6.0 100 5003/8 X 2-1/2" 9.0 100 500

3/8 X 3" 10.0 100 5003/8 X 4" 13.0 100 5003/8 X 5" 18.8 50 2501/2 X 3" 18.0 50 2501/2 X 4"1/2 X 5"

24.030.4

5050

250250

1/2 X 6" 45.0 50 2005/8 X 3" 35.0 50 2005/8 X 4" 40.0 50 1505/8 X 5" 47.0 50 1505/8 X 6" 54.0 25 100

3/4 X 4-1/2" 71.0 25 75Available FinishesElectro Zinc & Stainless 304

3/4 X 5-1/2"3/4 X 6-1/4"

81.091.0

2525

100100

SCREW ANCHORFigure HUS-H


10.1 50 4003/8 X 3"13.1 50 30019.0 50 300

3/8 X 4"3/8 X 5"

19.9 50 30018.0 50 30018.3 50 30024.4 50 15031.0 50 15046.0 5036.0 20

150160

40.5 20 8047.8 20 8055.5 20 60

[email protected]

TAPCON ANCHORS

Available StylesHex Head & Flat Head


100100

CONDRIVE 1000Figure C1000

1/4 X 1-1/4"1/4 X 1-3/4"


Figure TAPCONWGT Box CaseScrew

Size 100 PCS Quantity Quantity3/16 X 1-1/4"3/16 X 1-3/4"

0.81.0

100100

500500

3/16 X 2-1/4" 1.2 100 5003/16 X 2-3/4" 1.5 100 5003/16 X 3-1/4" 1.7 100 5003/16 X 3-3/4"

3/16 X 4"2.02.1

100100

500500

3/16 X 5" 3.3 100 5003/16 X 6" 4.5 100 400

1/4 X 1-1/4" 1.2 100 5001/4 X 1-3/4"1/4 X 2-1/4"

1.52.0

100100

500500

1/4 X 2-3/4" 2.3 100 5001/4 X 3-1/4" 2.8 100 5001/4 X 3-3/4" 3.1 100 500

Available Finishes1/4 X 4"1/4 X 5"

3.34.3

100100

500500

Climaseal & Stainless 304 1/4 X 6" 5.2 100 400

TAPCON STARTEFigure TSK

R KIT

Kit Includes Quantity

1Condrive 1000

Kit Includes QuantityDrill Adapter

Sleeve11

3/16" Socket 11/4" Socket 1

Phillips Socket 1#2 Phillips Bit#3 Phillips Bit

11

1/8" Hex Key 1


1.5 100 5002.0 100 500

1/4 X 1-3/4"1/4 X 2-1/4"


Available Finishes 8.3 100 500Blue Perma-Seal, White Perma-Seal, 11.5 100 500Coated Silver, Zinc, Stainless 304, 13.0 100 100Stainless 410 & Bronze 15.5 100 100

1111

#3 Phillips Bit1/8" Hex Key

Phillips Socket#2 Phillips Bit

3/8 X 3"3/8 X 4"3/8 X 5"3/8 X 6"


TAPPER CONCRETE SCREWFigure TAPPER

Screw WGT Box CaseSize 100 PCS Quantity Quantity

3/16 X 1-1/4" 0.8 100 5003/16 X 1-3/4" 1.0 100 5003/16 X 2-1/4" 1.2 100 5003/16 X 2-3/4" 1.5 100 5003/16 X 3-1/4"3/16 X 3-3/4"

1.72.0

100100

500500

3/16 X 4" 2.1 100 5001/4 X 1-1/4" 1.2 100 500

2.3 100 5001/4 X 2-3/4"2.8 100 5001/4 X 3-1/4"

Available Styles 1/4 X 3-3/4" 3.1 100 500Hex Head & Flat Head 1/4 X 4" 3.3 100 500

3/8 X 2" 5.3 100 500

TAPPER 1000Figure T1000

Kit Includes QuantityDrill Adapter 1

Sleeve 13/16" Socket 11/4" Socket 1

[email protected]

KWIK-CON II+

Available StylesTorx Hex Head, Torx Flat Head & Phillips Head


Available FinishesZinc Plated & Stainless

KWIK-CON DELUXE KITFigure KWIKCONKIT


Figure KWIKCONWGT Box CaseScrew

Size 100 PCS Quantity Quantity3/16 X 1-1/4"3/16 X 1-3/4"

0.81.0

100100

10001000

3/16 X 2-1/4" 1.2 100 10003/16 X 2-3/4" 1.5 100 10003/16 X 3-1/4" 1.7 100 10003/16 X 3-3/4"

3/16 X 4"2.02.1

100100

10001000

1/4 X 1-1/4" 1.2 100 10001/4 X 1-3/4" 1.5 100 10001/4 X 2-1/4" 2.0 100 10001/4 X 2-3/4"1/4 X 3-1/4"

2.32.8

100100

10001000

1/4 X 3-3/4" 3.1 100 10001/4 X 4" 3.3 100 10003/8 X 2" 5.3 100 10003/8 X 3"3/8 X 4"

8.311.5

100100

10001000

Kit IncludesInset Bit #3 PHL

Quantity1

Inset Bit Torx #27 1Insets Bit Torx #25 1

Hex Drvier 15/16" Hex Drvier5/16" Hex Setter

11

Insert Bit Holder 11/8" Hex Key 1


TRUBOLT+

SNAKE+Figure PSA+

Section XI Page 63Section XI Page 63

VERTIGO+Figure PCV+

Construction Fasteners Cracked Concrete

Figure CWSWGT Box CaseBolt

100 PCS Quantity QuantitySize1/2 X 4-1/2"1/2 X 4-1/2"

26.828.0

2525

150150

1/2 X 5-1/2" 32.0 25 150

5/8 X 6"5/8 X 5" 47.0

54.01010

10050

5/8 X 7" 62.0 10 305/8 X 8-1/2" 80.0 10 30

Part Rod Box CaseNumber6401SD

Size3/8"

Quantity50

Quantity500

Rod WGT Box CaseSize1/4"

100 PCS Quantity 100

Quantity500

3/8" 100 5001/2" 50 250

[email protected]

Figure PS+

Page 64 Section XIPage 64 Section XI


POWER-STUD+SD1


*1/4 X 1-3/4" 6.0 100 6001/4 X 2-1/4" 9.0 100 6001/4 X 3-1/4" 10.0 100 600*3/8 X 2-1/4" 13.0 50 300*3/8 X 2-3/4" 18.8 50 300

3/8 X 3" 18.0 50 3003/8 X 3-1/2" 24.0 50 3003/8 X 3-3/4" 30.4 50 300

3/8 X 5" 45.0 50 3003/8 X 7" 35.0 50 200

*1/2 X 2-3/4" 40.0 50 2001/2 X 3-3/4" 47.0 50 2001/2 X 4-1/2" 54.0 50 2001/2 X 5-1/2" 71.0 50 150

1/2 X 7" 81.0 25 1001/2 X 8-1/2" 91.0 25 100*5/8 X 3-1/2" 45.0 25 100*5/8 X 4-1/2" 35.0 25 1005/8 X 4-3/4" 40.0 25 100

5/8 X 5" 47.0 25 1005/8 X 6" 54.0 25 75

* Less than the minimun embedment 5/8 X 7" 71.0 25 75for strenght design. 5/8 X 8-1/2" 81.0 25 50


Figure PS+2

6.0 100 6009.0 100 60010.0 100 600

40.0 50 20047.0 50 200

5/8 X 5"5/8 X 6"

5/8 X 8-1/2"3/4 X 5-1/2"

5/8 X 4-3/4"

Bolt

3/8 X 3"3/8 X 3-1/2"3/8 X 3-3/4"

1/2 X 4-1/2"1/2 X 5-1/2"

1/2 X 7"1/2 X 8-1/2"


91.0 25 10045.0 25 10035.0 25 100

3/4 X 7"3/4 X 8-1/2"

3/4 X 6-1/4"


POWER-STUD+SD2

WGT Box Case100 PCS QuantitySize Quantity

13.0 50 3003/8 X 5"18.8 50 3001/2 X 2-3/4"18.0 50 30024.0 50 30030.4 50 30045.0 50 30035.0 50 200

54.0 50 2005/8 X 7"71.0 50 15081.0 25 100

[email protected]

10.0 100 600

40.0 50 200

1/2 X 5"

BoltSize

*1/4 X 1-1/4"*1/4 X 1-3/4"1/4 X 2-1/4"

3/8 X 3"3/8 X 4"

*1/2 X 2"

1/2 X 4"

Page 66 Section XIPage 66 Section XI

47.0 25 10054.0 25 75

20 60* Less than the minimun embedment 10 40for strenght design. 10 30

*5/8 X 3"

3/4 X 6"3/4 X 8"3/4 X 10"

5/8 X 5"

*3/4 X 3"*3/4 X 4"3/4 X 5"

1/2 X 6"1/2 X 6-1/2"

1/2 X 8"

5/8 X 4"


WEDGE-BOLT+Figure WB+


6.0 100 6009.0 100 600

13.0 100 5001/4 X 3"18.8 50 30018.0 50 300

*3/8 X 1-3/4"3/8 X 2-1/2"

24.0 50 25030.4 50 250

3/8 X 45.0 5" 50 25035.0 50 1503/8 X 6"

47.0 50 200*1/2 X 2-1/2"54.0 50 1501/2 X 3"71.0 50 15081.0 25 10091.0 25 7545.0 25 7535.0 25 7540.0 25 100

71.0 25 755/8 X 6"81.0 25 755/8 X 8"91.0 20 6040.0 20 6047.0 20 6054.071.081.0


PE1000+

AC100+Gold


EPCON G5Figure G5

8


Figure PE1000+Box Case

Quantity QuantityTubeSize

PE1000+ 13oz. - 12

Figure AC100+Box Case

Quantity QuantityTubeSize

Injection System 12 3610 oz. Quik-Shot

8 oz. SBSoz. SBS12 36- 1212

12 oz. SBS - 1229 oz. SBS - 8

Box CaseTubeQuantity Quantity

- 6Size

PE1000+ 13oz.

[email protected]

Figure PF+

POWERSTICKFigure PSTICK

Box Case

Available ColorsWhite & Grey

EPCON A7Figure A7

Box Case

Tube

Tube

Page 68 Section XIIPage 68 Section XII

Box Case

EPCON C6

Tube

Construction Fasteners Adhesive

POWER-FAST+

Tube Box CaseSize Quantity Quantity

PF+ 15oz - 12PF+ 22oz ‐ 12

Quantity Quantity12 36

Size7oz10oz 12 36

Quantity QuantitySize- 6A7 28oz

A7 10oz - 6A7 8oz - 6A7 5 oz - 12

Figure C6Box CaseTube

Siz Quantitye QuantityC6 1 -8oz 6


HIT-HY 50Figure HITHY50

‐ 4

HIT-HY 20Figure HITHY20

Box CaseQuantity Quantity

HIT-ICE

1100ml

Size

Section XII Page 69Section XII Page 69

Figure HITICE

Construction Fasteners Adhesive

Tube Box CaseSize Quantity Quantity

330ml - 25

Tube

- 25330ml1100ml ‐ 4

Figure HITICE Tube Box CaseSize Quantity Quantity

297ml - 24

[email protected]

Page 70 Section XIIIPage 70 Section XIII

6.0


6.8 100X Length

1/4 X 1-1/2"

3/8 X

Rod Size

Construction Fasteners Rod Hanger

WOOD VERTICAL HANGERFigure WVH

WGT BoxRod SizeX Len 100 PCSgth Quantity1/4 X 6.5 2" 1003/8 4.8 1" 100

3/8 X 6.0 2" 1003/8 X 2 9.1-1/2" 100

3/8 X 9.2 3" 1003/8 X 9.5 4" 100

1/2 X 2 10.0-1/2" 100

WOOD SIDE HANGERFigure WSH

Rod WGTSize BoxX Len 100 PCSgth Quantity1/4 X 8.0 2" 1003/8 6.0 X 1" 1 1001003/8 X 7.0 2" 100

3/8 X 2 10.3-1/2" 100

CONCRETE VERTICAL HANGERFigure CVH

6.3 1003/8 X 1-1/2"7.0 501/2 X 2-3/4"

ROD HANGER NUT DRIVERFigure ND

PartNumber

ProductType

WGT100 PCS

ND1 STEEL & WOOD 10.5ND2 1/4" CONCETE 4.0ND3 3/8" CONCRETE 11.0ND4 1/2" CONCRETE 18.0


Section XIII Page 71Section XIII Page 71

Figure SSH & SSHNWGT BoxRod Size


STEEL VERTICAL HANGERFigure SVH & SVHN

Rod WGTSize BoxX Len 100 PCSgth Quantity1/4 X 5.3 1" 100*3/8 5.3X 1" 100

3/8 X 1 5.5-1/2" 100*3/8 X 5.81-1/2" 100

* With Hex Nuts 3/8 X 5.3 2" 100

TEK VERTICAL HANGERFigure TVHN

Rod WGTSize BoxX Len 100 PCSgth Quantity

1/4 X 1 5.5-1/2" 1003/8 X 1 5.5-1/2" 1001/2 X 1 6.0-1/2" 100

STEEL SIDE HANGER

100 PCS QuantityX Length6 1001/4 X 1"

*3/8 7.3X 1" 100*3/8 X 7.01-1/2" 50

* With Hex Nuts *3/8 5.3X 2" 100

TEK SIDE HANGERFigure TSHN

Rod WGTSize BoxX Len 100 PCSgth Quantity

1/4 X 1 5.5-1/2" 1003/8 X 1 6.0-1/2" 100

[email protected]

GST20 3/8" 6.01/4X 2"


GST6 1/2" 8.0SS ‐ Stainless SteelSH ‐ Swivel Head

Part Rod WGTNumber Size 100 PCS

1/4 X 6"

ScrewSize


SAMMYS FOR WOODFigure GST

Part Rod Screw WGTNumber Size Size 100 PCSGST100 1/4" 1/4 X 1" 5.0GST200 1/4" 1/4 X 2" 6.5GST300 1/4" 1/4 X 3" 7.0GST.75 3/8" 1/4 X 3/4" 4.8GST10 3/8" 1/4 X 1" 4.8

GST20SS 3/8" 6.01/4 X 2"GST25-380 3/8" 9.33/8 X 2-1/2"

GST30 3/8" 1/4 X 3" 7.0GST30SS 3/8" 1/4 X 3" 7.0

GST40 3/8" 1/4 X 4" 7.2GST60 3/8" 1/4 X 6" 8.0GST2 1/2" 1/4 X 2" 6.0

GST2.5-380 1/2" 3/8 X 2-1/2" 10.0GST3 1/2" 1/4 X 3" 7.0GST4 1/2" 1/4 X 4" 7.2

SHGST20 3/8" 6.01/4 X 2"SHGST30 3/8" 7.01/4 X 3"

SIDEWINDERS FOR WOODFigure SWG

SWG100 1/4" 7.51/4 X 1"SWG200 1/4" 8.01/4 X 2"SWG10 3/8" 1/4 X 1" 6.0SWG20 3/8" 1/4 X 2" 7.0

SWG20SS 3/8" 1/4 X 2" 7.0SWG25-380 3/8" 3/8 X 2-1/2" 10.3

SWG30 3/8" 1/4 X 3" 8.5


SAMMYS FOR STEEL

DST25 3/8" 6.3DST30 3/8" 6.6

1/4 X 2-1/2"1/4 X 3"

SWD100 1/4" 6.0SWDR100 1/4" 6.0

1/4 X 1"1/4 X 1"

Cons stenerstruction Fa Rod Hanger

Figure DSTPart Rod WGT

Number Size 100 PCSScrewSize

DSTR100 1/4" 1/4 X 1" 5.2DSTR10 1/4" 1/4 X 1" 5.2DST150DST200

1/4"1/4" 1/4 X 2"

1/4 X 1-1/2" 6.86.0

TEK500 1/4" 12-24 X 1-1/2" 5.5DSTR1 3/8" 1/4 X 1" 5.8

DSTR1-1/2DSRT516

3/8"3/8"

12-24 X 1-1/2"5/16 X 1-1/4"

6.27.2

DST10 3/8" 1/4 X 1" 4.8DST10SS 3/8" 1/4 X 1" 5.2

DST15 3/8" 1/4 X 1-1/2" 5.3DST15SS

DST203/8"3/8"

1/4 X 1-1/2"1/4 X 2"

5.35.5

DST516 3/8" 7.2TEK50 3/8" 5.5

5/16 X 1-1/4"12-24 X 1-1/2"

DST2.0 1/2" 6.01/4 X 2"DSTR1.0

DSTR5.161/2"1/2"

1/4 X 1"5/16 X 1-1/4"

7.07.2

DST5.16 1/2" 5/16 X 1-1/4" 7.2SS ‐ Stainless Steel TEK5.0 1/2" 12-24 X 1-1/2" 6.0SH ‐ Swivel Head SHDSTR1 3/8" 1/4 X 1" 5.2

SIDEWINDERS FOR STEELFigure SWD

Part Rod Screw WGTNumber Size Size 100 PCS

SWD10 3/8" 6.0SWD10SS 3/8" 6.0

1/4 X 1"1/4 X 1"

SWD15 3/8" 6.31/4 X 1-1/2"SWD15SS

SWD203/8"3/8" 1/4 X 2"

1/4 X 1-1/2" 6.36.5

SWD516 3/8" 5/16 X 1-1/4" 7.5SWDR1 3/8" 1/4 X 1" 7.0

SWDR1-1/2SWDR516

3/8"3/8"

12-24 X 1-1/2"5/16 X 1-1/4"

7.37.2

SS ‐ Stainless Steel SWT15 3/8" 12-24 X 1-1/2" 7.3

Section XIII Page 73

[email protected]

Number Size 100 PCSCST200 1/4" 6.8

Size5/16 X 1-3/4"


3/8 6.3

SWC200SW ‐ Sidewinder SWC20 3/8"

SAMMYS TOGGLE FOR DRYWALLFigure SST


SAMMYS X-PRESSFigure XP

Part Rod WGTScrewNumber Size Size 100 PCSXP200 1/4" 1/4" X 1" 5.5XP20 3/8"XP35 3/8"

1/4" X 1"1/4" X 1"

5.75.7

SXP20 3/8" 1/4" X 1" 5.7S ‐ Swivel Head SXP35 3/8" 1/4" X 1" 5.7SW ‐ Sidewinder SWXP35 3/8" 1/4" X 1" 5.7

SAMMYS FOR CONCRETEFigure CST

Part Rod Screw WGT

CST20 3/8" 6.35/16 X 1-3/4"CST20SS 3/8" 6.35/16 X 1-3/4"CST20SS

CST2 1/2" 3.55/16 X 1 3/45/16 X 1-3/4"

1/4" 5/16 X 1-3/4" 7.55/16 X 1-3/4" 7.5

Part Rod WGTScrewNumber Size 100 PCSSizeSST300 1/4" 1/4 X 3" 10.1SST30 3/8" 1/4 X 3" 10.1

SAMMYS TOOLSFigure #14

Part Product ColorNumber Type

#14#14SW

SAMMYSSIDWINDERS

BlackRed

#14SH SWIVEL HEAD OrangeUXPIT X-PRESS Zinc


7163 1/4 51/4 X 2

Constr steners

AL

Rode

LV

Rode"

eX 2"

e

uction Fa Rod Hanger

VERTIGO STEEL VERTICFigure PSV

Part WGTNumber Siz 100 PCS

7155 1/4" 5.37157 3/8" 5.37158 3/8" 5.57159 3/8" 5.87160 3/8" 5.37152 1/4" 5.57154 3/8" 5.57161 1/2" 6.0

VERTIGO WOOD VERTICAFigure PW

Part WGTNumber Siz 100 PCS

7163 1/4 6.5

ScrewSiz

1/4

1/4 X 1-1/2"12-24 X 1-1/2"12-24 X 1-1/2"12-24 X 1-1/2"

ScrewSiz

1/4 X 1"1/4 X 2"1/4 X 1"

1/4 X 1-1/2"

6.7203 3/8" 4.87165 3/8" 6.07167 3/8" 9.17169 3/8" 9.27162 3/8" 10.0

VERTIGO CONCRETE VERTICALFigure PCV

Part Rod WGTNumber Size 100 PCS

7171 1/4" 6.87173 3/8" 6.37175 1/2" 7.0

ScrewSize

1/4 X 1-1/4"1/4 X 1-1/2"3/8 X 2-3/4"

1/4 X 2"1/4 X 3"1/4 X 4"

3/8 X 2-1/2"

1/4 X 1"

Section XIII Page 75

[email protected]


VERTIGO STEEL SIDEFigure PSS

7184 3/8" 7.3

7188 3/8" 5.37200 1/4" 5.57201 3/8" 6.0

VERTIGO WOOD SIDEFigure PWS

Part Rod WGT

7205 3/8" 6.27170 3/8" 7.01/4 X 2"

1/4 X 1"

1/4 X 1"

1/4 X 2"12-24 X 1-1/2"12-24 X 1-1/2"

Screw


7170 3/8 7.07156 3/8" 10.3

VERTIGO SOCKETFigure PSOCKET

Part WGTNumber 100 PCS

7187 10.5

7198 18.0

STEEL & WOOD

1/2" CONCRETE

1/4 X 23/8 X 2-1/2"

ProductType

Rod Hanger

Part Rod WGTScrewNumber Size 100 PCSSize

7183 1/4" 6.01/4 X 1"

7186 3/8" 7.01/4 X 1-1/2"

Number Size 100 PCSSize7185 1/4" 8.11/4 X 1"

7195 4.01/4" CONCETE7197 11.03/8" CONCRETE



RECIPROCATING BLADES

M12 10/14 10.8

*Other Sizes Available W12 6 10.8

BANDSAW BLADESFigure BLADEBAND

18 12.0

BladeSize

3'8-7/8 X 1/2"

Section XIV Page 77Section XIV Page 77

18 12.0

HOLE SAWSFigure HOLESAW

TPI WGT

2" 37.9

5" 120.0*Other Sizes Available 6" 150.0

3 8 7/8 X 1/2

Saw Blades

Figure BLADEPart TPI WGT

Number 100 PCSM6 18 5.4M8 18 7.2M9 14 8.1

W6 6 5.4W8 10 7.2W9 6 8.1

TPI WGT 100 PCS

100 PCS1" 25.1

1-1/2" 29.2

2-1/2" 51.63" 75.84" 86.5

[email protected]

Construction Fasteners NOTES

CARPENTER & PATERSON, INC.DESIGNERS • ENGINEERS • MANUFACTURERS

WWW.CARPENTERANDPATERSON.COM

SPECIALS, SPECIALS AND MORE SPECIALS

Our manufacturing facilities are equipped with a number of different machines for manufacturingspecial fasteners and rods. In addition, we have a substantial network of fastener suppliers, bothdomestic and international, which allows us to service all of your construction fastener needs.If you don't see what you are looking for in our abbreviated Construction Fastener Catalog, pleasecall your nearest Carpenter & Paterson sales office for assistance.

Smaller fasteners are boxed foreasier handling.

Large special alloy U-boltsare manufactured in ourDonora, PA facilities.

Forged clevises are attached tothreaded rods with lock nuts and tagged.Assembling and tagging is an added-value service to simplify field erection.

We can thread up to 6" diameter andcan provide a variety of coatings forcorrosion protection.

Call your local sales office for additional fastener prices and availability

CONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT:

SALES OFFICES AND MASSACHUSETTS NEW JERSEY (North)WAREHOUSES: 225 Merrimac Street 369 Jefferson Avenue

Woburn, MA 01801 Saddle Brook, NJ 07663Telephone: (781) 935‐2950 Telephone: (973) 772‐1800Fax: (781) 935‐7664 Fax: (973) 772‐1800

MARYLAND NEW JERSEY (South)8941 D'Arcy Road 3900 River RoadUpper Marlboro, MD 20774 Pennsauken, NJ 08110Telephone: (301) 333‐4631 Telephone: (856) 488‐1988Fax: (301) 333‐4638 Fax: (856) 488‐0824

PENNSYLVANIA484 Galiffa DriveDonora, PA 15033Telephone: (724) 379‐8461Fax: (724) 379‐8463

MANUFACTURING PLANTS: NEW JERSEY

369 Jefferson AvenueSaddle Brook, NJ 07663T l h (973) 772 1800Telephone: (973) 772‐1800Fax: (973) 772‐8333

PENNSYLVANIA484 Galiffa DriveDonora, PA 15033Telephone: (724) 379‐8461Fax: (724) 379‐8463

Tel: (781) 935‐2950 • Fax: (781) 935‐7664

225 Merrimac Street, Woburn, MA 01801

CARPENTER & PATERSON, INC.EXECUTIVE OFFICES

CARPENTER & PATERSON, INC.DESIGNERS • ENGINEERS • MANUFACTURERS


e‐mail: [email protected]

DESIGNERS • ENGINEERS • MANUFACTURERS

Documents

Carpenter & Paterson Construction Fasteners