Embed Size (px)
Citation preview
CARD CLOTHINGGETTING FIBERS INTO SHAPE
2 Card Clothing / Spinning
Spinning –Easily identify our product ranges
Trützschler Wire Identification Code –
Every TCC metallic wire is clearly defined by the Trützschler Wire Identi fication Code. Here, the user can
identify the tooth geometry, special
versions or the surface quality immediately.
T 40 30 090 0367 31 BRZsurface treatmentA = brushedC = coatedE = chemically polishedP = mechanically polished
tooth shapeB = banana shapeF = surface at point > 0.1 mmG = tooth with enhanced pointN = negative front angleW = grooved wire
special versionsR = wire with serrations (serrated wire) V = interlinkedS = sandblastedU = ultrasonic-cleanedZ = scale-free by special heat treatmentX = (long life) NOVOSTAR®
X1 = (long life) NOVOSTAR plus®
Trützschler wire
total height[1/10 mm]
working height
[1/10 mm]
front angle [°]
base width[1/100 mm]
MMF = man-made fibresppsi = points per square inch
points density [points per square inch]
3Card ClothingSpinning /
4 Card Clothing / Spinning Top-Sellers
Our Spinning Top-Sellers
Cotton, Combed · Base Width: 0.40 mm · Angle: 30° · PPSI: 950
All applications · Base Width: 0.90 mm · Angle: 30° · PPSI: 367
100 % Viscose · Base Width: 0.50 mm · Angle: 25° · PPSI: 806
Cotton, OE-Rotor, Ring, carded · Base Width: 0.50 mm Angle: 30° · PPSI: 860
MMF, < 1.3 dtex · Base Width: 0.60 mm · Angle: 20° · PPSI: 742
Cotton, OE-Rotor · Base Width: 0.50 mm · Angle: 40° · PPSI: 860
Cotton, Ring, Air-Jet · Base Width: 0.40 mm · Angle: 40° · PPSI: 949
MMF, 1.3 - 1.7 dtex · Base Width: 0.70 mm · Angle: 20° · PPSI: 636
Cylinder wiresT17.30.040.0950.05/X1
T40.30.090.0367.31/BRZ
T20.25.050.0806.07/X1
T17.30.050.0860.05/GX1
T25.20.060.0742.12/X1
T17.40.050.0860.05/X1
T17.40.040.0949.05/FGX1
T25.20.070.0636.12/X1
Doffer wires
Our Top-Sellers can be identified
by this symbol
TOP
All applications
Cotton, Airjet · Base Width: 0.40 mm · Angle: 40° · PPSI: 949
NOVODOFF 30
T17.40.040.0949.05/GX1
5Card ClothingSpinning Top-Sellers /
2nd roller · Base Width: 16 rows/" · Angle: 20° · PPSI: 164
All applications · Base Width: 0.90 mm · Angle: 30° · PPSI: 326
All applications · Base Width: 1.0 mm · Angle: 30° · PPSI: 280 All applications · Base Width: 1.0 mm · Angle: 30° · PPSI: 304
3rd roller · Base Width: 16 rows/" · Angle: 20° · PPSI: 210
T50.20.160.0164.35/V
T50.30.090.0326.37/FGR
T40.30.100.0280.28/BZ
T50.20.160.0210.35/VB
T50.30.100.0304.37/RZ
Doffer wires
Trützschler 3-lickerin-cards
Our Top-Sellers can be identified by this symbol
TOP
6 Card Clothing / Spinning product range
Raw Material Details Wire Identification Code
Base Width Angle PPSI
100% Cotton
Ring
CardedT17.30.040.0950.05/X1 0.40 mm 30° 950
T17.40.040.0950.05/X1 0.40 mm 40° 950
Combed
T17.30.040.0950.05/X1 0.40 mm 30° 950
T17.35.040.0950.05/X1 0.40 mm 35° 950
T17.40.040.0950.05/X1 0.40 mm 40° 950
OE- RotorT17.40.040.0950.05/X1 0.40 mm 40° 950
T17.40.050.0860.05/X1 0.50 mm 40° 860
OE- Rotor Recycled T20.30.060.0725.07/X1 0.60 mm 30° 725
Air-JetT17.35.040.0950.05/X1 0.40 mm 35° 950
T17.40.040.0950.05/X1 0.40 mm 40° 950
Bleached Cotton T25.15.080.0448.12/X1 0.80 mm 15° 448
Bleached Cotton Heavy Weight
T33.15.090.0220.24/FAESX1 0.90 mm 15° 220
100% Man-Made Fibers
< 1.3 dtex T25.20.060.0742.12/X1 0.60 mm 20° 742
1.3 dtex - 1.7 dtexT25.20.070.0636.12/X1 0.70 mm 20° 636
T25.20.060.0742.12/X1 0.60 mm 20° 742
1.7 dtex - 2.2 dtex T25.20.070.0636.12/X1 0.70 mm 20° 636
> 2.2 dtex T25.20.080.0556.12/X1 0.80 mm 20° 556
100% Viscose T20.25.050.0806.07/X1 0.50 mm 25° 806
Blends
1.3 dtex - 1.7 dtex
T17.30.050.0860.05/X1 0.50 mm 30° 860
T20.25.050.0806.07/X1 0.50 mm 25° 806
T25.25.060.0727.13/X1 0.60 mm 25° 727
RecycledT17.30.060.0717.05/X1 0.60 mm 30° 717
T25.20.070.0636.12/X1 0.70 mm 20° 636
100% Cotton or 100% Man-Made Fibers
Flex Cards T17.30.050.0860.05/X1 0.50 mm 30° 860
TOP
TOP
TOP
TOP
Cylinder wires NOVOSTAR PLUS
7Card ClothingSpinning product range /
Raw Material Application Wire Identification Code
Base Width Angle PPSI
100% Cotton
RingCarded T17.40.040.0949.05/FGX1 0.40 mm 40° 949
Combed T17.40.040.0949.05/FGX1 0.40 mm 40° 949
Air-Jet T17.40.040.0949.05/FGX1 0.40 mm 40° 949
OE-Rotor T17.40.040.0827.05/FGX1 0.40 mm 40° 827
Recycled cotton
All applications
T17.40.050.0760.05/FGX1 0.50 mm 40° 760Blends
ViscoseT17.40.050.0662.05/FGX1 0.50 mm 40° 662
Miscellaneous
100% Cotton
Ring Carded T17.30.050.0860.05/GX1 0.50 mm 30° 860
OE-Rotor T17.30.050.0860.05/GX1 0.50 mm 30° 860
OE-Rotor T17.35.050.0860.05/GX1 0.50 mm 35° 860
RingCarded T17.30.040.0949.05/GX1 0.40 mm 30° 949
Combed T17.30.040.0949.05/GX1 0.40 mm 30° 949
Ring Combed T17.35.040.0949.05/GX1 0.40 mm 35° 949
Air-Jet T17.35.040.0949.05/GX1 0.40 mm 35° 949
Ring Combed T17.40.040.0949.05/GX1 0.40 mm 40° 949
Air-Jet T17.40.040.0949.05/GX1 0.40 mm 40° 949
TOP
TOP
TOP
TOP
TOP
Cylinder wires NOVOSTAR PLUS, specialized
Doffer wires
Raw Material Application Wire Identification Code
Base Width Angle PPSI
Man-Made Fibers, Blends
All applications
T40.30.090.0367.31/BRZ 0.9 mm 30° 367
100% Man-Made Fibers
NOVODOFF 30 - - -
100% CottonT40.30.090.0367.31/BZ 0.9 mm 30° 367
T40.30.100.0280.28/BZ 1.0 mm 30° 280
Bleached CottonT40.30.100.0295.28/FGRZ 1.0 mm 30° 295
T40.30.090.0367.31/BZ 0.9 mm 30° 367
OthersT50.30.100.0304.37/RZ 1.0 mm 30° 304
T50.30.090.0326.37/FGR 0.9 mm 30° 326
TOP
TOP
TOP
TOP
TOP
8 Card Clothing
Lickerin wires single lickerin cards
Lickerin wires three lickerin cards
Raw material Card Type Designation Wire Identification Code
Base Width
Angle PPSI
100% Cotton Trützschler cards1st roller, pinned
- - - -
100% Cotton Trützschler cards 1st roller T50.10.210.0066.35/V 12 rows/" 10° 66
Man-Made Fibers, recycled flex cards
Trützschler cards 1st roller T50.00.315.0034.34/V 8 rows/" 0° 34
Blends Trützschler cards 1st roller T50.05.315.0041.34/V 8 rows/" 5° 41
All raw materials Trützschler cards 2nd roller T50.20.160.0164.35/V 16 rows/" 20° 164
All raw materials Trützschler cards 3rd roller T50.20.160.0210.35/VBX 16 rows/" 20° 210
Cotton Rieter C 60 1st lickerin T50.10.210.0122.34/V 12 rows/" 10° 122
Man-Made Fibers, Blends
Rieter C 60 1st lickerin T50.05.180.0131.34/V 14 rows/" 5° 131
All raw materials Rieter C 60 2nd lickerin T50.20.210.0122.42/V 12 rows/" 20° 122
All raw materials Rieter C 60 3rd lickerin T50.20.160.0210.35/VB 16 rows/" 20° 210
Lickerin wires also available in NOVOSTAR® quality (X)
TOP
TOP
/ Spinning product range
Raw Material Card Type Wire Identification Code
Base Width Angle PPSI
Man-Made Fibers, blends
Trützschler cards T50.05.315.0041.34/V 8 rows/" 5° 41
Cotton, flex. Cards Trützschler cards T50.10.315.0044.34/V 8 rows/" 10° 44
Bleached cotton Trützschler cards T50.00.315.0034.34/V 8 rows/" 0° 34
CottonRieter C50/C51
HypercardT50.10.160.0203.35/V 16 rows/" 10° 203
Cotton universal T50.10.315.0044.34/V 8 rows/" 10° 44
Cotton Rieter C50/C51, C60 T50.10.210.0122.34/V 12 rows/" 10° 122
Cottonuniversal,
grooved lickerinT55.10.110.0115.42/W 1.10 mm 10° 115
Synthetics Rieter C50/C51 T50.05.180.0131.34/V 14 rows/" 5° 131
Syntheticsuniversal,
grooved lickerinT55.00.110.0081.42 1.10 mm 0° 81
All raw materials Rieter C50/C51 T50.05.180.0131.34/V 14 rows/" 5° 131
All raw materialsRieter C50/C51
HypercardT50.10.160.0203.35/V 16 rows/" 10° 203
All raw materialsuniversal, grooved
lickerinT55.05.110.0093.42/W 1.10 mm 5° 93
Grooved wire available with 1.10 mm, 1.15 mm, 1.20 mm, 1.25 mm, 1.30 mm, 1.40 mm, 1.50 mm Lickerin wires also available in NOVOSTAR® quality (X)
9Card Clothing
Miscellaneous wires
Blow room wires
Raw Material Cylinder Type Wire Identification Code
Base Width Angle PPSI
All raw materials
Stripping roll T40.30.180.0110.28/AESN 1.8 -30° 110
Feed roll T25.00.200.0122.08/F 2.0 0° 122
Feed roll (chute) T35.00.300.0056.18/F 3.0 0° 55
Feed roll (chute) T55.10.520.0028.23/NV 5.2 -10° 28
Feed roll T50.15.150.0066.30 1.5 15° 66
Feed roll, spacer wire 2.5 mm x 3.5 mm
Stripping roll T40.18.110.0184.27/N 1.1 -18° 184
Stripping roll T40.18.110.0184.27/ASN 1.1 -18° 184
Stripping roll T40.30.180.0110.28/N 1.8 -30° 110
Feed roll T25.00.200.0122.08/F 2.0 0° 122
Feed roll (chute) T55.10.420.0028.33/NV 4.2 -10° 28
Card Type Details Wire Identification Code
Base Width Angle PPSI
Trützschler cards TR11 T55.10.420.0028.33/VN 6 rows/" -10° 28
Trützschler cards TR13 / 14 T75.10.420.0010.53/V 6 rows/" 10° 10
Trützschler cards Trützschler cards T60.20.420.0020.38/FV 6 rows/" 20° 20
Marzoli opener T075.22.420.0015.53/V 6 rows/" 22° 15
Rieter opener T100.00.250.0025.75 2.50 mm 0° 25
Rieter opener T100.12.250.0026.75 2.50 mm 12° 26
Rieter opener T100.00.250.0014.82/W 2.50 mm 0° 14
Rieter opener T100.10.250.0014.82 2.50 mm 10° 14
For all openers also stationary flats are available
Spinning product range /
10 Card Clothing
Cleaning fillets
Raw Material Card type / roll Cylinder type Wire gauge
Fabric layers
Dimension
All raw materials
Stripping cleaning rollTR-AP,
No. 24, 16 mm24 3 width = 19.0 mm
Flat stripping rollTR-DS,
No. 22, 38 mm22 2 width = 39.3 mm
Flat cleaning rollTR-DP,
No. 18, 25 mm18 4 width = 27.5 mm
Flat tops
Raw Material Details High production rates
Low production rates
100% Cotton
Ring
CardedNOVOTOP 55
TCC Top 55NOVOTOP 45
CombedNOVOTOP 58
TCC Top 55NOVOTOP 55
OE-RotorNOVOTOP 45
TCC Top 45NOVOTOP 40
OE- Rotor Recycled NOVOTOP 40 TCC Top 45
Air-JetNOVOTOP 58
TCC Top 55NOVOTOP 55
Bleached Cotton NOVOTOP 33S TCC Top 35S
100% Man-Made Fibers
< 1.3 dtex NOVOTOP 45 TCC Top 45
1.3 dtex - 1.7 dtex NOVOTOP 40S TCC Top 45
1.7 dtex - 2.2 dtexNOVOTOP 40S
TCC Top 40NOVOTOP 33S
> 2.2 dtex NOVOTOP 33S TCC Top 35S
100% Viscose NOVOTOP 45 TCC Top 45
Blends
1.3 dtex - 1.7 dtexNOVOTOP 45
TCC Top 45NOVOTOP 40
RecycledNOVOTOP 40 TCC Top 45
TCC Top 40NOVOTOP 30
100% Cotton or 100% Man-Made Fibers
Flex Cards NOVOTOP 40 TCC Top 45
/ Spinning product range
TR-DPTR-DS TR-AP
11Card Clothing
Raw Material Card type / roll Cylinder type Wire gauge
Fabric layers
Dimension
All raw materials
Rieter / Marzoli Stripping fillet No. 10 8 width = 46 mm
Rieter / Marzoli Cleaning fillet No. 24 3 width = 19 mm
Rieter / Marzoli Flat stripping sheet No. 14 4 1,037 mm x 47.5 mm
Rieter Flat stripping sheet No. 6 6 1,012 mm x 33.5 mm
Marzoli Flat stripping fillet No. 22 3 width = 38 mm
Marzoli Flat stripping fillet No. 22 3 width = 26 mm
Crosrol Cleaning sheet No. 10 4 1,028 mm x 33 mm
Crosrol Fillet No. 26 / 30 8 width = 26 mm
Various cards Stripping fillet No. 18 4 width = 38 mm
Various cards Flat stripping fillet No. 22 3 width = 26 mm
Stationary flats
Flat profile type Card type Designation Height
R
modern cards
TS.640/R TS.240/R
11.0 mmTS.550/R TS.140/R
TS.420/R TS.090/R
TS.320/R
T
other cards
TS.640/T TS.240/T
16.8 mmTS.550/T TS.140/T
TS.420/T TS.090/T
TS.320/T
C TS.640/C TS.320/C
17.0 mm 19.0 mm22.2 mm
TS.550/C TS.240/C
TS.420/C TS.140/C
I
TS.090/ITS.078/I
Height
7,5 mm9,5 mm
Lenght
993 mm1004 mm1012 mm1050 mm
B
TS.090/B 18.2 mm
Spinning product range /
12 Card Clothing / Nonwovens
Nonwovens –Easily identify our product ranges
Trützschler Wire Identification Code –
every TCC metallic wire is clearly defined by the
Trützschler Wire Identi fication Code.
Here, the user can identify the tooth
geometry, special versions or the surface
quality immediately.
base rovs per inch:plein rib wires: base in mm/100
(e.g. 090 = 0.90 mm, 110 = 1.10 mm)or camlock wires: Cxx
(e.g. C08 = 8 rows/", C24 = 24 Gänge/"
shoulder width:[1/100 mm]
The letter code “C“ indicates a camlock
wire with the numbers of rows per inch given.
point density[points per square inch]
front angle [°]N = negative
total height:D = 2.00 mmE = 2.50 mmF = 3.00 mmG = 3.50 mmH = 4.00 mmI = 4.50 mmJ = 5.00 mmK = 5.50 mmL = 6.00 mm
special versions:A = thermically treatedB = mechanically treatedD = enhanced pointE = depth of cutF = flat on pointG = grooveH = NOVOSTAR® I = defiated tooth L = low shoulderP = chemically polished
R = banana shapeS = specialT = thick pointW = woolX = serrationsXX = double serrationsM = 6.50 mm
N = 7.00 mmQ = 7.50 mmR = 8.00 mmS = 8.50 mmT = 9.00 mmU = 9.50 mmV = 10.00 mm
13Card ClothingNonwovens /
14 Card Clothing / Nonwovens Top-Sellers
Our Nonwovens Top-Sellers
Our Top-Sellers can be identified
by this symbol
TOP
Height: 5.50 mm · Angle: 40° · PPSI: 143
Height: 5.00 mm · Angle: 30° · PPSI: 154 Height: 3.50 mm · Angle: 10° · PPSI: 270
Height: 5.00 mm · Angle: 40° · PPSI: 168
Breast cylinder worker
Transfer roller Main cylinder
C18 40K 143XX
C20 30J 154 094 10G 270
C24 40J 168X
Height: 4.20 mm · Angle: 15° · PPSI: 96
Breast cylinderC16 15I 96
Main cylinder worker
Height: 6.00 mm · Angle: 10° · PPSI: 41
Feed rollerC08 10L 41
Height: 4.00 mm · Angle: 40° · PPSI: 351
080 40H 351XB
Height: 5.00 mm · Angle: 40° · PPSI: 286
C28 40J 286XX
Height: 5.00 mm · Angle: 40° · PPSI: 286
090 40J 286X
15Card ClothingNonwovens Top-Sellers /
Our Top-Sellers can be identified by this symbol
Height: 5.00 mm · Angle: 40° · PPSI: 140 Height: 5.00 mm · Angle: 40° · PPSI: 121
130 40J 140B C20 40J 121FIB
Condenser
TOP
Height: 4.00 mm · Angle: - 30° · PPSI: 110
Take-off roller180N30H 110B
Feedling roller · Height: 6.0 mm · Angle: 10° · PPSI: 41
Airlay cardsC08 10L 41
Worker · Height: 5.0 mm · Angle: 40° · PPSI: 162
110 40J 162X
Turbo roller · Height: 3.0 mm · Angle: 5° · PPSI: 282
090 05F 282EHTA
Carding roller · Height: 5.0 mm · Angle: 30° · PPSI: 185
C24 30J 185
Height: 4.00 mm · Angle: 40° · PPSI: 351 Height: 4.20 mm · Angle: 40° · PPSI: 252
Doffer080 40H 351XB C24 40I 252X
16 Card Clothing
Lickerin
Breast cylinder
Feed roller
Wire Identification Code Options Height Angle PPSI
C08 10K 40
T - thick point 5.0 – 6.0 mm 10° – 20° 31 – 51
C08 10K 43
C08 20L 31
C08 20L 31T
C10 10L 51
C10 15J 50
Wire Identification Code Options Height Angle PPSI
C06 20K 30
T - thick point 5.5 – 6.0 mm - 10° – 30° 27 – 41
C08 10L 27
C08 10L 41
C08 20L 31
C08 30L 27
C08 30L 31T
C08N 10L 40
TOP
Wire Identification Code Options Height Angle PPSI
C12 15J 72
T - thick point 4.0 – 5.0 mm 10° – 20° 72 – 158
C14 10I 84
C14 15I 109
C16 15I 96
C16 20I 96
C20 20H 158
TOP
/ Nonwovens product range
17Card Clothing
Breast cylinder worker
Wire Identification Code Options Height Angle PPSI
080 45H 191
T - thick pointX - serrations
XX - double serrationsB - mechanically treated
4.0 – 5.5 mm 25° – 45° 52 – 286
C12 25J 72
C12 30J 52T
C12 40J 72
C14 45I 84X
C16 40J 112X
C18 40K 143XX
C20 40I 120
C20 45I 120X
C24 40J 168X
C28 40J 286XX
TOP
TOP
Breast cylinder stripper
Wire Identification Code Options Height Angle PPSI
C12 05H 060
T - thick point 4.0 – 5.0 mm 5° – 40° 60 – 156
C14 20I 84T
C16 10I 96
C16 35J 113T
C16 40I 112
C20 15I 156
C20 25I 141
C20 30I 154
Nonwovens product range /
18 Card Clothing
Transfer roller
Main cylinder worker
Wire Identification Code Options Height Angle PPSI
C14 20I 84T
T - thick point 4.5 – 5.0 mm 20° – 30° 84 – 185
C16 25J 96
C16 30J 123
C20 20I 120
C20 25I 120T
C20 30J 154
C24 30I 185T
TOP
Wire Identification Code Options Height Angle PPSI
080 40H 351XB
T - thick pointX - serrations
XX - double serrationsB - mechanically treated
4.00 – 5.0 mm 30° – 45° 143 – 351
080 45H 254X
090 35H 326XB
090 35J 235
090 40J 286X
C18 40K 143XX
C20 40I 210
C24 30I 185T
C24 34I 240
C28 40I 294
C28 40J 286XX
TOP
TOP
TOP
/ Nonwovens product range
Main cylinder
Wire Identification Code Options Height Angle PPSI
080 10E 384H
T - thick point 2.5 – 4.0 mm 10° – 20° 176 – 556
080 20E 556H
090 15E 396H
090 15F 396H
094 10G 270
C20 10H 176
C24 10G 240
C24 15H 212
C28 15G 303
TOP
19Card Clothing
Random roller
Wire Identification Code Options Height Angle PPSI
080 15F 448H
H - NOVOSTART - thick point
B - mechanically treated2.5 – 3.5 mm 10° – 25° 380 – 566
080 20E 556H
090 10F 566HTB
090 16F 566H
094 25G 380
Main cylinder stripper
Wire Identification Code Options Height Angle PPSI
090 20G 224
T - thick pointB - mechanically treated
3.5 – 4.5 mm 10° – 40° 175 – 380
094 25G 380
094 30I 208
110 22H 204
110 35H 266B
C20 10I 175
C20 40I 210
C24 15H 212
Nonwovens product range /
20 Card Clothing
Take-off roller
Wire Identification Code Options Height Angle PPSI
110N18G 184
B - mechanically treatedP - chemically treated
3.5 – 4.0 mm - 30° – - 18° 110 – 184
110N18G 184B
180N18H 113
180N30H 110
180N30H 110BTOP
/ Nonwovens product range
Condenser
Wire Identification Code Options Height Angle PPSI
110 40H 242
X - serrationsB - mechanically treated
4.0 – 5.5 mm 40° 117 – 242
130 40J 140B
130 40K 117
C24 40J 168
C20 40J 121FIB
TOP
TOP
Doffer
Wire Identification Code Options Height Angle PPSI
080 40H 351XB
T - thick pointX - serrations
XX - double serrationsB - mechanically treated
4.0 – 5.5 mm 30° – 45° 143 – 351
080 45H 254X
090 32H 337XB
090 35H 326XB
090 35J 235
C18 40K 143XX
C20 40I 210
C24 30I 185T
C24 34I 240
C24 40I 252X
C28 40I 294
TOP
TOP
21Card Clothing
Wires for airlay cards
Wire Identification Code Cylinder type Height Angle PPSI
080 05E 384H feeding roller 2.5 mm 5° 384
080 25H 350 stripper 4.0 mm 25° 350
080 45H 191 X carding roller - K1
3.0 – 6.0 mm
5° – 45° 191 – 286
080 45H 254X carding roller - K2
090 05F 282EHTA carding roller - K3
090 35J 235 carding roller - K4
090 40J 286X carding roller - K5
094 25I 324 worker - W1
10° – 40° 41 – 324
110 40J 162X worker - W2
110 40J 162X worker - W3
114 10G 233SL worker - W4
114 10G 233SR worker - W4
C08 10L 41 worker - W4
C12 25J 72 worker - W5
C18 40K 143XX cylinder4.0 – 5.5 mm 5° – 40° 120 – 143
C24 05H 120 cylinder
114 10G 233SL 1st card master plate 3.5 mm 10° 233
C28 40J 286XX 2nd card master plate 5.0 mm 40° 286
TOP
TOP
TOP
TOP
TOP
TOP
Nonwovens product range /
22 Card Clothing
Wires for garnetts
Wire Identification Code Cylinder type Height Angle PPSI
C08 35L 44 lickerin
6.0 – 7.5 mm 30° – 37° 29 – 44C08 37Q 29 lickerin
C10 30L 39 lickerin
C10 30L 51 cylinder
5.0 – 6.0 mm 30° 51 – 61C12 30J 61 cylinder
C12 30L 61 cylinder
C12 30J 61 worker5.0 mm 30° 61 – 85
C12 30J 85 worker
C12 30J 85 stripper5.0 – 6.0 mm 30° 61 – 85
C12 30L 61 stripper
C10 05I 18 fancy4.5 – 5.0 mm 5° – 15° 18 – 79
C12 15J 79 fancy
C12 30J 85 fancy stripper5.0 – 6.0 mm 30° 61 – 85
C12 30L 61 fancy stripper
C10 40L 42 doffer
6.0 – 6.5 mm 35° – 40° 42 – 113C12 40M 48XX doffer
C14 35L 78XX doffer
C14 40L 113DXX doffer
C12 30J 61 transfer roller5.0 mm 30° 61 – 99
C14 30J 99 transfer roller
C12 30J 61 main cylinder
5.0 mm 30° 61 – 110C14 30J 99 main cylinder
C16 30J 110 main cylinder
C12 30J 61 worker
5.0 mm 30° 61 – 110C14 30J 99 worker
C16 30J 110 worker
C12 30J 61 stripper
5.0 mm 30° 61 – 110C14 30J 99 stripper
C16 30J 110 stripper
C16 15J 95 fancy
4.5 – 5.0 mm 5° – 15° 18 – 95C10 05I 18 fancy
C12 15J 79 fancy
/ Nonwovens product range
voluntary certification
www.machines-for-textiles.com/blue-competence
23Card Clothing
Wire Identification Code Cylinder type Height Angle PPSI
C12 30J 61 fancy stripper
5.0 mm 30° 61 - 110C14 30J 99 fancy stripper
C16 30J 110 fancy stripper
C14 35L 78XX doffer
5.5 - 6.0 mm 35° - 40° 78 - 143 C18 35K 104LXX doffer
C18 40K 143XX doffer
C18 40K 143XXLD doffer
TOP
Trützschler Card Clothing GmbHP.O. Box 1151 · 75386 Neubulach, GermanyRosenstrasse 7 – 9 · 75387 Neubulach, GermanyPhone: +49 (0)7053 68-0 · Fax: +49 (0)7053 7359E-mail: [email protected] · www.truetzschler.com
Disclaimer:All data and information contained in the brochure was compiled with the utmost care and to the best of our knowledge and belief. However, we accept no liability for any typing errors or technical modifications. The photos and illustrations are for information purposes only and display in part optional equipment not included in the standard scope of supply. We cannot guarantee or accept liability for the up-to-dateness, accuracy, complete-ness or quality of the information given. All liability claims against the company or the author which refer to material or non-material damage caused by the use or passing on of the information provided, even if the said information is proven to be inaccurate or incomplete, are excluded. All data and information are non-binding.
Print no.: 16004-07/16-e · Agentur Brinkmann GmbH, Krefeld
Nonwovens product range /
w w w . t r u e t z s c h l e r . c o m
Fiber preparat ion ins tal lat ions: Bale openers · Mixers · Cleaners/Openers
Foreign Par t Separators · Dust separators · Tuf t blenders
Waste c leaners | Cards | Draw frames | Combing machines
Bale openers/Mixers | Card feeders | Cards/Cross lappers | Wet laying l ines
Hydroentangl ing, needl ing, thermo- and chemical bonding l ines
Finishing, dr ying, winding, s l i t t ing machiner y
Fi lament l ines: Carpet yarns (BCF) · Industr ia l yarns
Metal l ic wires: Cards · Cards long s taple · Cards nonwovens · Open-end spinning
Flat tops | Fi l le ts
Carding segments | Ser vice machines | Ser vice 24/7
G E T T I N G F I B E R S I N T O S H A P E – S I N C E 18 8 8
