Embed Size (px)
Citation preview
Carbonite UltraConfiguration Guide
v1.0
Document Information• Ross Part Number: 4841DR-100-01• Release Date: January, 2019. Printed in Canada
The information contained in this document is subjectto change without notice or obligation.
Copyright©2019 Ross Video Limited, Ross®, CrossOver®,MiniME™, and any related marks are trademarks orregistered trademarks of Ross Video Limited. All othertrademarks are the property of their respective companies.PATENTS ISSUED and PENDING. All rights reserved.No part of this publication may be reproduced, stored ina retrieval system, or transmitted in any form or by anymeans, mechanical, photocopying, recording orotherwise, without the prior written permission of RossVideo. While every precaution has been taken in thepreparation of this document, Ross Video assumes noresponsibility for errors or omissions. Neither is anyliability assumed for damages resulting from the use ofthe information contained herein.
Microsoft®, Windows®, and Windows XP® are eitherregistered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.
NVIDIA® and GeForce® are trademarks and/or registeredtrademarks of NVIDIA Corporation in the U.S. and/orother countries.
PatentsPatent numbers US 7,034,886; US 7,508,455; US7,602,446; US 7,802,802 B2; US 7,834,886; US7,914,332; US 8,307,284; US 8,407,374 B2; US8,499,019 B2; US 8,519,949 B2; US 8,743,292 B2; USD752,530 S; GB 2,419,119 B; GB 2,447,380 B; and otherpatents pending.
ii • Document Information — Carbonite Ultra Configuration Guide (v1.0)
Contents
Features..............................................................5Clean Feed Output..................................................................5
Custom Controls.....................................................................5
Device Control.........................................................................5
DVE (Fly Key)..........................................................................5
Effects Dissolve.......................................................................5
General Purpose Interface (GPI)............................................5
LiveEDL...................................................................................5
Matte/Wash Generator............................................................5
ME Effect System....................................................................5
Media-Store.............................................................................6
MediaManager........................................................................6
MediaWipe..............................................................................6
MemoryAI Recall Mode...........................................................6
Memory System......................................................................6
MiniME™
..................................................................................6
I/O Processor..........................................................................6
MultiScreen.............................................................................6
MultiViewer..............................................................................6
OverDrive®
Caprica Support...................................................7
Pattern and Matte/Wash Generators.......................................7
Tally Outputs...........................................................................7
UltraChrome............................................................................7
XPression Live CG..................................................................7
Product Comparison..........................................8Carbonite Black Control Panels..............................................8
Ultra Frame.............................................................................8
System Options................................................10
Specifications...................................................14Resources.............................................................................14
Hardware Weights.................................................................14
Environmental Characteristics..............................................14
Video Input Specifications.....................................................14
Video Output Specifications..................................................14
Audio Specifications..............................................................15
Jitter......................................................................................15
System Timing.......................................................................15
Power Consumption — Control Panel...................................15
Power Consumption — Frame..............................................15
Option Summary..............................................16Frame Options.......................................................................16
Training Options....................................................................16
Control Panel Options...........................................................17
Panel Dimensions............................................18CB9.......................................................................................18
CB1.......................................................................................18
CB1S.....................................................................................18
CB2.......................................................................................18
CB2S.....................................................................................19
CB3S.....................................................................................19
CB3X.....................................................................................19
Frame Dimensions...........................................20Ultra Frame...........................................................................20
Carbonite Ultra Configuration Guide (v1.0) — Contents • iii
Carbonite Ultra
Designed for Live!Carbonite builds on the Ross Video reputation fordesigning switchers for live studios, trucks, andpost-production. At the center of the action, it isimportant that the switcher be powerful and versatile,yet maintain its ease of operation. This frees the operatorto concentrate on the programming instead of theequipment, delivering a cleaner, more professionalproduction.
Ultra improves on the highly popular Carbonite Blackseries by bringing more I/O and more features in a 1 RUpackage.
Designed for Automation!The Carbonite family of switchers support the highlyadvanced OverDrive® Caprica automated productioncontrol system. Caprica takes advantage of the years ofdevice integration that Ross® has developed in the largeswitcher product lines and puts it into an independentserver. The Caprica server takes the place of theproduction switcher for controlling over 200 additionalproduction elements (such as robotics, graphics, audiomixers, servers, etc.), timing the show and creatingproduction macros.
Designed for Linear!The Carbonite family of switchers continues to build onRoss® Video's reputation for setting the standard formulti-definition linear editing suites. The traditionallayout and familiar controls of other Ross® switchersprovide the power and ease of use you have come toexpect.
Carbonite cleanly connects to virtually any editor usingthe industry standard GVG100/110 protocols.
Designed for You!With Ross® Video products installed in well over 125countries world-wide, our sales, demonstration, andtraining people get a lot of ongoing feedback fromcustomers. This feedback is carefully tracked andconsidered in the design and feature-set development ofour products. Key members of the design teams are partof an ongoing program in which they provide productdemonstrations, assist with product installation, and trainoperators. As a result, the complete line of Ross Videoproducts continues to offer our legendary combinationof power and ease of use.
Join our Growing Customer Base!Deciding to purchase a Carbonite switcher will put youin good company, with many thousands of Ross switchersinstalled worldwide. Carbonite continues to build on afamily of multi-definition switchers that have beendelivering the goods every day in live sports, stadiumscoreboards, and drama productions, mobile productions,as well as local and network newscasts.
Experience Great Support!Ross® has designed and manufactured productionswitchers for over 45 years, with significant year overyear growth for the past 25 years. We believe that animportant factor of our success is our focus on providinga superior customer experience. We continuallybenchmark our warranty and technical support to ensurethat they are the best in the industry.
We hope that you join the many thousands of satisfiedvideo professionals around the world that are proudowners of Ross® production switchers. Please do nothesitate to contact us with any questions or commentsyou have related to this Configuration Guide at Tel:+1-613-652-4886, Fax: +1-613-652-4425 or email us [email protected].
4 • Carbonite Ultra — Carbonite Ultra Configuration Guide (v1.0)
FeaturesThank you for your interest in the Ross® Carbonite UltraProduction Switcher. The Ultra builds on the Ross®
reputation for designing switchers that fit the needs ofany production environment.
Clean Feed OutputClean feed is typically used for bilingual and live-to-tapeproductions. It provides a second Program output that isderived from a different location than the standardprogram output. A frequent application is the recordingof shows for later airing without call-in phone numbersinserted.
The clean feed output can come from before or betweenthe keyers.
KEY 1 KEY 2PGM/PST
KEY 3 KEY 4
Custom ControlsThis feature brings the power of macros to the switcheroperator. Button presses, menu selections, eventcommands, or even the switcher state can be recordedto a custom control with pauses or holds between theevents. A simple button press can play these events backagain. Step through complex show openings as easily aspressing Custom Control buttons 1, 2, then 3.
Device ControlThe switcher can control a number of external devices,such as video servers and robotic cameras. For a completelist of supported devices, and information on how to setup and control these devices, visit the Ross Video website(rossvideo.com/production-switchers/carbonite/interface-list).
DVE (Fly Key)The advanced 2D DVE comes standard with eachswitcher, and can be used for performing over theshoulder, or picture in picture shots. This allows all keytypes to be zoomed, cropped, and repositionedhorizontally and vertically to create the look you want,or you can use one of the useful pre-built 2D effects toperform 2D background transitions.
Effects DissolveThe Effects Dissolve feature allows you to interpolatefrom one memory to another using a memory recall. Theswitcher will interpolate from the starting memory to the
destination memory, creating a smooth, two key frameeffect.
Only elements such as clip level and pattern position canbe interpolated in the effects dissolve. Other elements,such as crosspoint selection, pattern, and next transitiondata are recalled first, and then the switcher will slew tothe recalled memory.
An effects dissolve can be performed on as manyelements and MEs as required, based on the memory thatis being recalled.
General Purpose Interface (GPI)The switcher is equipped with 24 GPI I/Os that can beassigned as either an input or output independently.
The GPI inputs allow the switcher to interface withperipheral equipment such as editors. Each GPI inputcan be used to perform simple editing and switcherfunctions such as fade to black or an auto transition.
LiveEDLEdit Decision Lists (EDL) are files used by non-linearediting (NLE) suites to aid in post-production. Yourswitcher can capture EDL data in a file that you load intoyour NLE suite.
For information on using the LiveEDL feature, visit theRoss Video Website (rossvideo.com).
Matte/Wash GeneratorA matte generator and complex wash generator per ME,capable of multi-color washes comes standard. Any oneof the color generators can be assigned to MATTE, orwipe pattern edges. An additional simple color generatoris available for an Aux Bus.
ME Effect SystemThe ME (Multi-level Effect) systems are standard. Thenumber of MEs depends on the chosen switcher model.
Each ME provides 4 keyers supporting pattern mask,box mask, self-key, linear key, and an UltraChromeadvanced chroma key for each ME and is available toeach keyer.
Carbonite Ultra Configuration Guide (v1.0) — Features • 5
Media-StoreUp to 4 independent channels of video with alpha forplayout of stills and animations are availableswitcher-wide, allowing for thousands of full screen stillsand logos that can be cached and used on the switcher.
Media-Store provides 8 GB of cache. The number ofimages cached increases considerably when smaller,non-full screen images like logos are loaded from USB.
MediaManagerThe MediaManager allows you to easily manage stillsand animations on the switcher in a graphics interface.
MediaWipeA MediaWipe allows you to use an animation, withaudio, from the Media-Store to play over a backgroundor key transition. When the transition starts, the switcherplays the selected animation and audio over top of thebackground and keys that are being transitioned. A cut,dissolve, wipe, or DVE wipe is then performed layeredunder the animation to bring up the next shot when theanimation ends. The audio is played out one of the AESports.
MemoryAI Recall ModeWe take the guessing out of memory recalls by ensuringthat a memory recall will not affect what is currentlyon-air. MemoryAI uses the content of the memory toconfigure the Next Transition area and Preview bus forthe background and keyers so that the next transitiontakes the same sources on-air that were on-air in thememory.
For example, store a memory that has a key on-air withCAM1 and CAM2 selected on the background. Whenthis memory is recalled normally, it pops the same keyon-air with CAM1 and CAM2 on the background. Whenthe memory is recalled with MemoryAI turned on, CAM1is selected on the preset bus, and CAM2 is selected ona key that is not on-air. The transition area is then set upfor a background transition to bring CAM2 onto thebackground, take any on-air keys off, and take a keyon-air with CAM1.
Memory SystemStorage for 100 complete switcher snapshots per ME,MiniME™, and Canvas comes standard with all switchers.All of these memories can be stored to a USB mediadrive, providing custom tailored memories for everyoperator and every show.
MiniME™
The MiniME™ is an additional ME that is provided withthe switcher to perform basic dissolves and cuts. EachMiniME™ has 2 keyers, background, and preset buses.Unlike a full ME, the MiniME™ only supports dissolvesand cuts. The MiniME™ shares all the same sources asthe ME.
I/O ProcessorThe Input/Output Video Processors are independent videoprocessing engines that allow you to perform FSFC andcolor correction functions on specific inputs or outputs.Once an I/O Processor has been assigned to an input oroutput, it can be used to frame sync, format convert, andcolor correct.
The switcher comes standard with 8 I/O Processors andis upgradable to 34.
MultiScreenMultiScreen comes standard with 2 Canvas generators.Each Canvas can break a scene into up to 4 outputs thatcan be sent to independent projectors or displays to makea unified picture. Integrated edge blending allows youto compensate for the overlap in projector outputs, or theoutside bezel of your display.
Each screen in the Canvas output uses a MiniME™ tocreate the background and keys of the output. This allowsyou to have 2 Canvas generators with 2 screens each, or1 Canvas generator with 3 or 4 screens.
MultiViewerEach MultiViewer allows you to view up to 16 videosources, in 45 different layouts, from a single outputBNC. Any video source on the switcher, including MEProgram, Preview, and Media-Store channels, can berouted to any box on the MultiViewer. All boxes on theMultiViewer output include mnemonic source namesand red and green tallies.
Ultra comes standard with 1 broadcast-quality integratedVideo Processor MultiViewer and 1 I/O MultiViewer,upgradable to 2 of each. The MultiViewer outputs areonly available on specific output BNCs. The Video
6 • Features — Carbonite Ultra Configuration Guide (v1.0)
Processor MultiViewers can put any source on theswitcher in a box, except input 1-4. The I/O MultiViewerscan put any external video input or output in a box.
Figure 1: HD Layouts
Figure 2: MultiViewer Grid
OverDrive® Caprica SupportCarbonite Ultra can be controlled from OverDrive® usingthe Caprica interface. This interface allows OverDrive®
to perform memory recalls, transitions, and run customcontrols on the switcher. For information on setting upCaprica to interface with the switcher, refer to thedocumentation that came with your Caprica server.
It is recommended to have 3 MEs installed to becontrolled by Caprica, but operation is possible with only2 MEs.
Pattern and Matte/Wash GeneratorsA single pattern generator dedicated to wipes comesstandard, and is equipped with 10 classic wipes. Mostwipes can be rotated, bordered, multiplied, aspectized,and repositioned.
Tally OutputsThe switcher has 24 assignable tally relays located in therack frame. Each tally can be assigned to any number ofcombinations of input and output or bus.
UltraChromeThe UltraChrome 2 chroma keyer uses 2 independentchroma key engines to produce the video and alphacomponents of the key. These internal video streams canbe composited in a keyer, or fed out two separate videostreams to an external device, such as a video server.
XPression Live CGSeamlessly combine the creative power of the Ross®
XPression Designer software with the ease of use of yourRoss® switcher. Create stunning still graphics usingXPression Designer, and transfer them directly to anmedia-store channel on the switcher using the RossLinqinterface. Up to two (2) channels with dedicated alphacan be controlled from the XPression Software Client.This feature supports still images only.
Each switcher comes with a single license of XPression.Additional licenses can be ordered.
Carbonite Ultra Configuration Guide (v1.0) — Features • 7
Product ComparisonUse the following table to compare the different switchersin the product line.
Carbonite Black Control Panels
CB3XCB3SCB2SCB2CB1SCB1CB9
Control Panel
3224241624169
PanelSourceButtonsper Row
2416161216128
Number ofUserAssignableButtonsper Row
3322111
Number ofControlPanelRows
53043429818616210275TotalPanelButtons
3224241624169CustomControlButtons
YesNoSourceand KeyerMnemonics
Yes
LegendaryRossFaderHandlewithLifetimeGuarantee
3 Axis2 AxisPositioner
YesYesYesNoYesNoNoIn RowMemoryKeypad
Engineering and Networking
Yes (optional)RedundantPower
2 (not available at this time)NoExternalLink Port
2 × GigE (only 1 is active at this time)EthernetConnectivity
Ultra Frame
Ultra
Frame
YesSeparate Rack Frame
1 RURack Frame Height
Yes (optional)Redundant Power
Video Input/Output
1080p 25/29.97/50/59.94HD Video Formats
1080pSF 23.98/25/29.97
1080i 50/59.94
720p 50/59.94
480i, 576iSD Video Formats
24SDI Inputs (Max)
0HDMI Inputs (Max)
0Analog Inputs (Max)
14 (10 assignable + 4MultiViewer
SDI Outputs (Max)
YesClean Feed System
8/34FSFCs (Min/Max)1
Internal / Black Burst / Tri-LevelInput Reference Format
1Reference Inputs
1Reference Outputs
1/2Video Processor MultiViewer(Min/Max)1
1/2I/O MultiViewer (Min/Max)1
Effects Capabilities
4 + TransKeys per ME
82D DVE Channels SystemWide
8/34Proc Amps and ColorCorrectors (Min/Max)1
YesMemory AI
2UltraChrome Chroma Keys(Floating)
Storage and Networking
Yes (user supplied USB 2.0)USB Media Drive
4 (video + alpha)Media-Store Channels
8 GBMedia-Store CACHE
YesAudio Only Playout forMedia-Store
2 GigEEthernet Connectivity
YesLinux® OS
8 • Product Comparison — Carbonite Ultra Configuration Guide (v1.0)
Ultra
4Animated Logo Players withAudio
Peripheral Interfacing
YesDevice Control
YesOverDrive®CapricaCompatible
AMP/RossTalk/GPI OutputRoll Clip Control
1 (RJ45)Serial Ports
Comtrol® DeviceMaster® RTSSeries
Ethernet Serial PortExpanders
RossTalk/GVG100Automation and EditorProtocols
24GPI I/Os
24Tallies
1 (Frame)USB Ports
Notes1 Software options are required to be installed to activatethe maximum number of resources.
Carbonite Ultra Configuration Guide (v1.0) — Product Comparison • 9
System OptionsOptions are typically ordered when the switcher ispurchased. However, you can order options if your needschange in the future. Most of our options can be easilyinstalled in the field. You can take comfort in knowingthat you can purchase options in the future and thatinstallation at your site will be a smooth process.
XPression Live CG (XDS0-0001-CPS)Each switcher comes standard with a single license ofXPression that provides up to two (2) channels withdedicated alpha that can be controlled from the XPressionSoftware Client. This feature supports still images only.
The XPression Designer requires a computer with aWindows® 10 (32/64 bit) operating system and anNVIDIA® graphics card.
Power SuppliesNote: The CUF-124 does not come with a power supply.Youmust pick either a standard brick power supply (CUF-PSU), ora rack power option (CUF-RACKPWR) to provide power for theframe.
The redundant power supply options provides protectionagainst AC power failure. It allows two external powersupplies to receive power from independent powersources. Complete failure of one source, or power supply,will not affect the operation of the switcher in theslightest. If the main AC power fails, the switcherinstantly draws power from the remaining source. Thetransition from one power source to the other is totallytransparent and has no effect on the output of theswitcher; a critical feature should one power source failduring an on-air broadcast.
Tip: You can order a second CUF-PSU option to provideredundant power for the frame.
DescriptionOption
Adds a brick power supply for theframe.
CUF-PSU
Adds the Ultripower rack powersupply for the frame.
CUF-RACKPWR
Adds a redundant power supply forthe Carbonite Black control panel.
PSU-12V16A-6PIN
ME UpgradeUltra comes standard with 1 ME (ME P/P) and can beexpanded to 3 MEs.
Note: The ME options are done through DashBoard usinglicense keys and can be increased at any time.
DescriptionOption
Adds 2nd ME to the frame.CUF-ADD-ME2
Adds 3rd ME to the frame.CUF-ADD-ME3
MultiViewer Upgrade(CUF-ADD-MV2&4)
Ultra comes standard with 1 Video ProcessorMultiViewer and 1 I/O MultiViewer. TheCUF-ADD-MV2&4 option adds an addition VideoProcessor MultiViewer and I/O MultiViewer.
Note: The MultiViewer options are done through DashBoardusing license keys and can be increased at any time.
I/O Processor Upgrade(CUF-ADD-I/OPLUS)
The Input/Output Video Processors are independent videoprocessing engines that allow you to perform FSFC andcolor correction functions on specific inputs or outputs.Once an I/O Processor has been assigned to an input oroutput, it can be used to frame sync, format convert, andcolor correct.
Ultra comes standard with 8 I/O Processor and can beexpanded to 34 I/O Processors (one for every input andoutput).
Note: The I/O Processor option is done through DashBoardusing license keys and can be increased at any time.
HD-BNC to BNC Adapters(CUF-HDBNC-BNC)
The switcher uses HD-BNC for video inputs and output.If your cable infrastructure is already routed withstandard BNCs, HD-BNC to BNC adapters can be usedto convert the inputs and outputs of the switcher. Eachoption provides 8 HD-BNC to BNC cable adapters. Atotal of 5 sets will be needed to provide an adapter foreach HD-BNC on the switcher.
The switcher comes with 2 HD-BNC to BNC cableadapters.
ACID UltraChromeHR CameraACID cameras have been designed for maximum HDperformance in any studio production environment. Theyoffer best-in-class resolution, sensitivity and signal tonoise ratio, plus unique UltraChromeHR outputs forchroma key applications.
10 • System Options — Carbonite Ultra Configuration Guide (v1.0)
DescriptionOption
ACID AC-H200-UCHR camera.AC-H200-UCHR
ACID AC-Z50-UCHR camera.AC-Z50-UCHR
PIVOTCamPIVOTCam offers high performance image capture withquiet and accurate PTZ functionality, at a fantastic value.Get on-the scene fast watching, following, and twistingto capture those pivotal moments.
Figure 3: PIVOTCam-20 and PIVOTCam-SE
DescriptionOption
PIVOTCam-20 camera.PIVOTCAM-20
PIVOTCam-SE camera.PIVOTCAM-SE
Remote PanelsThis option provides external control for selecting sourceson an Aux bus from a remote panel. There are a numberof options for the remote control panels, depending onyour requirements.
DescriptionOption
Adds the 40 source button ethernetenabled RCP-ME remote controlpanel with integrated backlit display.
RCP-ME
Adds the 18 mnemonic source buttonethernet enabled RCP-QE18 remotecontrol panel.
RCP-QE18
Adds the 36 mnemonic source buttonethernet enabled RCP-QE36 remotecontrol panel.
RCP-QE36
DashBoard Display(CBPS-DashMenu)
The DashBoard Display combines a DashBoard computerwith a touchscreen into a single unit that can be installedonto a standard VESA-100 mount. The DashBoardDisplay connects to the switcher over ethernet to providethe advanced menu system interface to the setup andoperation of your Carbonite or Carbonite Black switcher.
The DashBoard Display eliminates the need to connectanother computer to your switcher network just to runDashBoard.
SMC-9901 Serial to MIDI Converter(SMC-9901)
The SMC-9901 Serial to MIDI Converter is used to allowcontrol of an Audio Mixer from a Ross Video switcher.
The SMC-9901 provides a single DB-9 connector for38,400 baud serial RS-422 communication, one 5-pinDIN connector for MIDI in, and two 5-pin DINconnectors for MIDI out. Power, Serial Tx and Rx, MIDIIn and MIDI Out Status LEDs next to the ports showactivity status.
The SMC-9901 connect to the switcher via the serial porton the frame, or an external port expander such as theComtrol® DeviceMaster®.
SHC-9642 SDI to HDMI Converter(SHC-9642)
The SHC-9642 SDI to HDMI Converter is a high-qualitysignal conversion solution within the family of GearLitecompact, self-contained modular products. TheSHC-9642 is the ideal solution for converting any SDIinput signal (up to 3Gb/s) into an HDMI Type-A outputformat. User-selectable audio decoding is available withunbalanced, stereo analog audio outputs. Up to 16channels of embedded audio are selectable, in stereopairs, for de-embedding and decoding.
Tip: The SHC-9642 SDI to HDMI Converter is a great way toconvert a 3Gb/s MultiViewer output to HDMI™ for externalmonitoring.
Carbonite Onsite OperationalTraining (CARBONITE-OTR-1DAY)
Although Ross Video switchers are designed to be aseasy as possible to install and operate, training is highlyrecommended to ensure that the process of taking yourRoss Video switcher to air is a smooth one.
Training is provided on the customer's equipment at theirsite. Expenses are extra, and billed at the completion ofthe visit. Ross Video cannot guarantee the availabilityof a local Trainer, as such, travel costs to all locationswill be invoiced at cost. Two (2) days, or more, oftraining is recommended for multiple ME systems. Four(4) weeks advanced scheduling notice is required.Additional days of training can be added with theCARBONITE-OTR-1DAY option. Please quote oneadditional option for each additional day of trainingrequired.
Carbonite Ultra Configuration Guide (v1.0) — System Options • 11
Customers cancellation or rescheduling of on-siteservices without seven (7) calendar days advanced noticewill incur full invoice.
Carbonite Online OperationalTraining (CARBONITE-ONL-1DAY)
Sometimes you don't need the hands-on attention thathaving a trainer come to your facility provides. In thesesituations Ross Video provides comprehensive,web-based, online training.
Two (2) days, or more, of training is recommended formultiple ME systems. Four (4) weeks advancedscheduling notice is required. Additional days of trainingcan be added with the CARBONITE-ONL-1DAYoption. Please quote one additional option for eachadditional day of training required.
Customers cancellation or rescheduling of on-siteservices without seven (7) calendar days advanced noticewill incur full invoice.
Carbonite Onsite Technical Training(CARBONITE-OTT-1DAY)
On-site technical training introduces the user to some ofthe technical aspects of switcher operation andmaintenance. This includes, but is not limited to; Basicoperation, Switcher installation and configurations,Peripheral interfaces, Video signal flow, System timingrequirements, Circuit block diagrams, Circuit boardoverviews, Jumpers and indicators, Troubleshooting tips,Software upgrading, and Routine maintenance.
Training is provided on the customer's equipment at theirsite. Expenses are extra, and billed at the completion ofthe visit. Ross Video cannot guarantee the availabilityof a local Trainer, as such, travel costs to all locationswill be invoiced at cost. Two (2) days, or more, oftraining is recommended for multiple ME systems. Four(4) weeks advanced scheduling notice is required.Additional days of training can be added with the sameoption code. Please quote one additional option for eachadditional day of training required.
Carbonite Onsite Commissioning(CARBONITE-COM-1DAY)
On-site Commissioning is a great way to ensure that yourswitcher is properly installed into your facility and tunedto maximum performance.
Once the customer has installed and cabled theequipment, a Ross Commissioning expert will come onsite to get the switcher configured, verify that all
peripheral interfaces are operating properly, provide abasic technical orientation, and help you get on the air.
Training is provided on the customer's equipment at theirsite. Expenses are extra, and billed at the completion ofthe visit. Ross Video cannot guarantee the availabilityof a local Trainer, as such, travel costs to all locationswill be invoiced at cost. Two (2) days, or more, oftraining is recommended for multiple ME systems. Four(4) weeks advanced scheduling notice is required.Additional days of training can be added with the sameoption code. Please quote one additional option for eachadditional day of training required.
Customers cancellation or rescheduling of on-siteservices without seven (7) calendar days advanced noticewill incur full invoice.
Please note that commissioning does not replace operatoror technical training. Contact your Ross representativeto discuss which types of assistance are best suited toyour needs.
Extended WarrantyThis extends the standard one-year warranty on yourcontrol panel or frame by one year. Additional years canbe purchased if required.
DescriptionOption
Adds an additional year ofwarranty to the CB9 controlpanel.
CB9-PANEL-ROSSCARE
Adds an additional year ofwarranty to the CB1 controlpanel.
CB1-PANEL-ROSSCARE
Adds an additional year ofwarranty to the CB1S controlpanel.
CB1S-PANEL-ROSSCARE
Adds an additional year ofwarranty to the CB2 controlpanel.
CB2-PANEL-ROSSCARE
Adds an additional year ofwarranty to the CB2S controlpanel.
CB2S-PANEL-ROSSCARE
Adds an additional year ofwarranty to the CB3S controlpanel.
CB3S-PANEL-ROSSCARE
Adds an additional year ofwarranty to the CB3X controlpanel.
CB3X-PANEL-ROSSCARE
Adds an additional year ofwarranty to the frame with 1ME installed.
CUF-1ME-ROSSCARE
Adds an additional year ofwarranty to the frame with 2MEs installed.
CUF-2ME-ROSSCARE
12 • System Options — Carbonite Ultra Configuration Guide (v1.0)
DescriptionOption
Adds an additional year ofwarranty to the frame with 3MEs installed.
CUF-3ME-ROSSCARE
Carbonite Ultra Configuration Guide (v1.0) — System Options • 13
SpecificationsThe information is this section is subject to changewithout notice.
ResourcesThe number of resources specific to your switcherdepends on the options installed.
UltraResource
82D DVE Channels Switcher Wide
28Aux Buses
2 (floating)Chroma Keys per ME
256 (8 Banks× 32 CCs)
Custom Controls
998Max Events per CC
8/34FSFCs (Min/Max)2
8/34Proc Amp/Color Correctors (Min/Max)2
24GPI I/Os
4 + TransKeyers per ME
2Matte Generators per ME
4Media-Store Channels (Video + Alpha)
8 GBMedia-Store CACHE
100Memories per ME
1/3MEs (Min/Max)2
4MiniME™ Engines
21Canvas Generators
16MultiViewer Boxes
44MultiViewer Layouts
1/2Video Processor MultiViewer (Min/Max)2
1/2I/O MultiViewer (Min/Max)2
2Pattern Generators per ME
24Tallies
24SDI Video Inputs
14SDI Video Outputs
192.168.0.123Frame IP (default)
192.168.0.129Panel/CarboNET IP (default)
Notes:1 Each Canvas consumes MiniME™ engines to generatethe output. The number of Canvas outputs that are
available depends on the number of MiniME™ enginesthat are available.2 Software options are required to be installed to activatethe maximum number of resources.
Hardware Weights
WeightHardware
13lbs (5.90kg)CB1 Panel
17lbs (7.71kg)CB1S Panel
20lbs (9.07kg)CB2 Panel
26lbs (11.79kg)CB2S Panel
35lbs (15.88kg)CB3S Panel
40lbs (18.14kg)CB3X Panel
8lbs (3.63kg)CB9 Panel
13lbs (5.90kg)Ultra
Environmental Characteristics
All Switchers
0 - 40°C (32 - 104°F)Ambient Temperature Range
Active, Front-to-Back airflowFrame Cooling
PassiveControl Panel Cooling
Video Input Specifications
ValueInput Specification
>50m @ 3Gb/sEqualization (using Belden1694 cable)
>100m @ 1.5 Gb/s
>300m @ 270 Mb/s (5°-40°C)
75 ohm, terminatingImpedance
SMPTE 259M/292M/424M(non-looping)
Video Inputs, SDI
Standard Definition — analogblack
Reference Inputs(non-terminating, looping)
High Definition — tri-level sync
Video Output Specifications
ValueOutput Specification
<-15dB @ 1.5GHzReturn Loss
<-10dB @ 3GHz
14 • Specifications — Carbonite Ultra Configuration Guide (v1.0)
ValueOutput Specification
800ps ±10% (SD)Rise and Fall Time
240ps ±10% (HD)
800mV ±10%Signal Level
0 VoltsDC Offset
<10%Overshoot
10-bit SMPTE-292M/424Mserial digital
Video Outputs, SDI HD Mode
Audio Specifications
ValueSpecification
24-bit AES3 in HD (20-bit inSD)
Audio Depth
1 Stereo Pair (2 channels)Channels
AESOutput
Multi-channel Waveform AudioFile (.wav)
File Format
110 Ohms, differentialImpedance
1.5/6V peak-to-peakMinimum/Maximum outputvoltage swing
20ns, typicalRise and Fall Times
48kHzSample Rate
Locked to VideoSynchronization
Jitter
ValueSpecification
Alignment (> 100KHz) < 0.2UIHD - Tri-Level Sync
Timing (<10Hz) < 1.0UI
Performance not guaranteedwith composite reference
HD - Composite Reference
Alignment (> 1KHz) < 0.2UISD - Tri-Level Sync
Timing (<10Hz) < 0.2UI
Alignment (> 1KHz) < 0.2UISD - Composite Reference
Timing (<10Hz) < 0.5UI
System Timing• All video inputs zero time relative to reference input,
auto timing will correct for inputs out of time by upto +/- 0.25 line.
• System delay is less than 1 line.
Power Consumption — Control Panel
CB3XCB3SCB2SCB2CB1SCB1CB9
80W6.7A12V
65W5.4A12V
45W3.8A12V
35W2.9A12V
30W2.5A12V
25W2.1A12V
24W2A12V
Power
100 - 120V~, 220 - 240V~, 47-63HzInputVoltage
Power Consumption — Frame
Ultra
114W 7.6A 15VConsumption
100 - 120V~, 220 - 240V~,47-63Hz
Input Voltage
Carbonite Ultra Configuration Guide (v1.0) — Specifications • 15
Option SummaryUse the available options listed in the following tables for each control panel or frame.
Frame Options
Ultra
Frames
CUF-1241 ME, 24 Inputs
Frame Options
CUF-ADD-ME22nd ME Frame Upgrade
CUF-ADD-ME33rd ME Frame Upgrade
CUF-HDBNC-BNCHD-BNC to BNC Adapter Cables(×8)
CUF-PSUBrick Power Supply
CUF-RACKPWRUltripower Rack Power Supply
CUF-1ME-ROSSCAREExtended Warranty, 1 ME Frame
CUF-2ME-ROSSCAREExtended Warranty, 2 ME Frame
CUF-3ME-ROSSCAREExtended Warranty, 3 ME Frame
Switcher Options
CUF-ADD-I/OPLUSExtra I/O Processor
CUF-ADD-MV2&4Extra MultiViewers
CBPS-DashMenuDashBoard Display
SHC-9642SHC-9642 SDI to HDMI Converter
SMC-9901SMC-9901 Serial to MIDIConverter
XDS0-0001-CPSXPression Live CG
AC-H200-UCHRACID AC-H200-UCHR
AC-Z50-UCHRACID AC-Z50-UCHR
PIVOTCAM-20PIVOTCam-20
PIVOTCAM-SEPIVOTCam-SE
Training Options
Code
CARBONITE-ONL-1DAYCarbonite Online OperationalTraining
CARBONITE-COM-1DAYCarbonite Onsite Commissioning
CBF-ULTRACHRHR-COM-1DAYUltraChromeHR OnsiteCommissioning
CBF-MOSAIC-COM-1DAYMosaic Onsite Commissioning
CARBONITE-OTR-1DAYCarbonite Onsite OperationalTraining
16 • Option Summary — Carbonite Ultra Configuration Guide (v1.0)
Code
CARBONITE-OTT-1DAYCarbonite Onsite TechnicalTraining
Control Panel Options
Extended Warranty, PanelRedundant Power, PanelPanel Option CodeControl Panel
CB9-PANEL-ROSSCAREPSU-12V16A-6PINCB9-PANELCB9
CB1-PANEL-ROSSCAREPSU-12V16A-6PINCB1-PANELCB1
CB1S-PANEL-ROSSCAREPSU-12V16A-6PINCB1S-PANELCB1S
CB2-PANEL-ROSSCAREPSU-12V16A-6PINCB2-PANELCB2
CB2S-PANEL-ROSSCAREPSU-12V16A-6PINCB2S-PANELCB2S
CB3S-PANEL-ROSSCAREPSU-12V16A-6PINCB3S-PANELCB3S
CB3X-PANEL-ROSSCAREPSU-12V16A-6PINCB3X-PANELCB3X
Carbonite Ultra Configuration Guide (v1.0) — Option Summary • 17
Panel DimensionsThese dimensions are provided as a guide only. Contact Ross Video Technical Support for scale CAD drawings of thecontrol panels and frames.
Dimensions are in inches with metric dimensions shown in brackets [mm].
CB916.20 [411.5]
10.06[255.5]
PUSH
STATUSEDIT
OPTIONSAPPEND/INS
SYSTEMDELETE
REF CONFIGCOPY
RESETSTART/STOP
USERPREV
PERSNEXT
SAVECANCEL
LOADPASTE
PUSH
STORE LOCKHOME
MENUBACK
CCUP
NEXT(SHIFT)
SELFKEY
AUTOSELECT
CHRKEY DVE KEY AUX MiniME ME BANK
1BANK
2BANK
3BANK
4
RECALL
SHIFT BKGD KEY 1 KEY 2 KEY 3
DISS WIPE DVE MEDIA
KEY 4
SHIFT7 8654321
SHIFT7 8654321
7 8654321
KEY/AUX/CUSTOM
PROGRAM
PRESET
CUTAUTO
TRANS
KEY 4TRANS
KEY 3TRANS
KEY 2TRANS
KEY 1TRANS
CB123.42 [594.9]
10.72[272.3]
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
BANK
2
BANK
1
BANK
4
BANK
3
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA
TRANSITION
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
PUSH PUSH PUSH
LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
SELF
KEY
AUTO
SELECT
CHR
KEY
KEY 1
SELDVE
KEY 2
SEL
KEY 3
SEL
KEY 4
SEL
AUX
1
AUX
2
AUX
3
AUX
4
ME 1
STORE
ME 2
STORE
ME 1
RECALL
ME 2
RECALL
CB1S32.51 [825.8]
10.72[272.3]
PUSH PUSH PUSH
MULTI
SCN 1STORE
RECALL
ME 2ME 1LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
4
BANK
3
STORE 7 8 9 RECALL
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USERPGM 4 5 6 EFF
RATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
TRANSITIONEFFECTS MEMORY
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
MiniME
1
MiniME
2
MiniME
3
MiniME
4
MULTI
SCN 2
ME 3
CB223.42 [594.9]
16.24[412.6]
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
SELF
KEY
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
AUX
2
AUX
1
AUX
3
AUX
4
BANK
2
BANK
1
BANK
4
BANK
3
AUX
2
AUX
1
AUX
3
AUX
4
BANK
2
BANK
1
BANK
4
BANK
3
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA
TRANSITION 2
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
TRANSITION 1
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA
KEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
ROLL
CLIP CUTAUTO
TRANS
PUSH PUSH PUSH
LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
SELF
KEY
AUTO
SELECT
AUTO
SELECT
CHR
KEYDVE
DVECHR
KEY
KEY 1
SEL
KEY 1
SEL
KEY 2
SEL
KEY 2
SEL
KEY 3
SEL
KEY 3
SEL
KEY 4
SEL
KEY 4
SEL
ME 1
STORE
ME 2
STORE
ME 1
RECALL
ME 2
RECALL
18 • Panel Dimensions — Carbonite Ultra Configuration Guide (v1.0)
CB2S32.51 [825.8]
16.24[412.6]
PUSH PUSH PUSH
MULTI
SCN 1STORE
RECALL
ME 2ME 1LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
4
BANK
3
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
4
BANK
3
STORE 7 8 9 RECALL
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USERPGM 4 5 6 EFF
RATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
TRANSITION 2EFFECTS MEMORY 2
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
TRANSITION 1
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USER
STORE 7 8 9 RECALL
PGM 4 5 6 EFFRATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
KEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
ROLL
CLIP CUTAUTO
TRANS
EFFECTS MEMORY 1
MiniME
1
MiniME
2
MiniME
3
MiniME
4
MULTI
SCN 2
ME 3
CB3S32.51 [825.7]
21.76[552.8]
PUSH PUSH PUSH
MULTI
SCN 1STORE
RECALL
ME 2ME 1LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
4
BANK
3
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
4
BANK
3
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
4
BANK
3
STORE 7 8 9 RECALL
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USERPGM 4 5 6 EFF
RATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
TRANSITION 3EFFECTS MEMORY 3
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
STORE 7 8 9 RECALL
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USERPGM 4 5 6 EFF
RATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
TRANSITION 1EFFECTS MEMORY 1
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
TRANSITION 2
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USER
STORE 7 8 9 RECALL
PGM 4 5 6 EFFRATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
KEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
ROLL
CLIP CUTAUTO
TRANS
EFFECTS MEMORY 2
MiniME
1
MiniME
2
MiniME
3
MiniME
4
MULTI
SCN 2
ME 3
CB3X38.19 [970.0]
21.76[552.8]
PUSH PUSH PUSH
MULTI
SCN 1STORE
RECALL
ME 2ME 1LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
3
BANK
4
BANK
6
BANK
5
BANK
7
BANK
8
ME
2
ME
1
USER
1
ME
3
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
3
BANK
4
BANK
6
BANK
5
BANK
7
BANK
8
ME
2
ME
1
USER
1
ME
3
KEY 2
SEL
KEY 1
SEL
KEY 3
SEL
KEY 4
SEL
AUX
2
AUX
1
AUX
3
AUX
4
SHOW
ALPHA
KEY
PV
AUTO
SELECT
SELF
KEY
CHR
KEYDVE
AUX
6
AUX
5
AUX
7
AUX
8
BANK
2
BANK
1
BANK
3
BANK
4
BANK
6
BANK
5
BANK
7
BANK
8
ME
2
ME
1
USER
1
ME
3
STORE 7 8 9 RECALL
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USERPGM 4 5 6 EFF
RATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
TRANSITION 3EFFECTS MEMORY 3
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
STORE 7 8 9 RECALL
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USERPGM 4 5 6 EFF
RATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
TRANSITION 1EFFECTS MEMORY 1
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
TRANSITION 2
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA USER
STORE 7 8 9 RECALL
PGM 4 5 6 EFFRATE
MEMAI 1 2 3 ME
RATE
EFFDISS
BANK 0 ENTERKEY
RATE
KEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
ROLL
CLIP CUTAUTO
TRANS
EFFECTS MEMORY 2
MiniME
1
MiniME
2
MiniME
3
MiniME
4
MULTI
SCN 2
ME 3
Carbonite Ultra Configuration Guide (v1.0) — Panel Dimensions • 19
Frame DimensionsDimensions are in inches with metric dimensions shown in brackets [mm].
Ultra Frame
10.00 [254.0]18.98 [482.1]
17.50 [444.5]
1.63[41.4]
PS1PS2
SERIAL
TALLY
GPIO
LTC
REF
OUT
12
34
56
78
910
1112
1314
IN
MV OUT
OUT
12
34
56
78
910
1112
1314
1516
1718
1920
2122
2324
IN
SD
AES1 AES2
1 2 3 4 5 6 7 8
UPGD
20 • Frame Dimensions — Carbonite Ultra Configuration Guide (v1.0)
