Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Carbocrete™
Antimicrobial Urethane Cement Flooring Systems
CARBOCRETE
Carbocrete urethane cement systems provide superior protection for harsh environments.
› Antimicrobial throughout entire film
› Excellent protection to Moisture Vapor Transmission (MVT)
› Thermal shock protection during high temperature wash cycles
› May be applied to green concrete
› Slip resistant
› High abrasion and chemical resistance
› Withstands high mechanical stress
› Extremely low VOC / low odor
› Suitable for use in USDA facilities
› Available in several configurations to meet a range of service requirements
Carbocrete flooring systems defend against bacteria and viruses for the life of the coating.Carbocrete incorporates Polygiene®, silver ion nanotechnology through the entire film of the coating. It’s vital protection you can stand on.
CARBOCRETE
DISTILLERIES & BREWERIES
FOOD & BEVERAGE
HEALTHCARE & PHARMACEUTICAL
MEAT, POULTRY, & SEAFOOD
CHEMICAL PROCESSING
FOOD PREPARATION
Moisture Vapor Barrier
Application Suitability
Conventional Floor CoatingA conventional floor coating will blister due to moisture vapor lifting the coating from the surface.
Carbocrete Flooring SystemsCarbocrete diverts the moisture vapor through a defined pore matrix keeping the coating intact and the floor protected.
CARBOCRETE
Carbocrete HF & RT (1/4 to 3/8-inch)Carbocrete HF (trowel applied) and Carbocrete RT (rake/trowel applied) provide ultimate temperature resistance and maximum durability.
Carbocrete SR (3/16 to 1/4-inch) Carbocrete SR is a slurry applied flooring solution to meet moderate to heavy duty service conditions.
Carbocrete HF @ 1/4-3/8”
› Unaffected by MVT
› Excellent impact resistance
› Excellent abrasion resistance
› Excellent thermal shock resistance
› 220°F – continuous temperature resistance
› 250°F – non-continuous temperature resistance
› Excellent chemical resistance
› Heavy anti-slip finish
› Cost effective solution
› Unaffected by MVT
› Very good abrasion resistance
› Very good thermal shock resistance
› 200°F – continuous temperature resistance
› 250°F – non-continuous temperature resistance
› Moderate anti-slip finish
› Decorative finish options
Carbocrete SR
Aggregate Broadcast
Carbocrete FC**Or other topcoat as
specified by Carboline
CARBOCRETE
Carbocrete SL (1/8 to 3/16-inch)Carbocrete SL is a self-leveling, slurry applied flooring system. It provides an excellent alternative to traditional epoxy floor systems.
Carbocrete Cove (1/8 to 3/16-inch) Carbocrete Cove provides a highly durable cove base which ensures a seamless, hygienic transition between floor and wall.
› Smooth finish; aesthetic appeal
› MVT resistance up to 12 lb./1,000 sq. ft. per 24 hours
› Thermal shock resistant
› Abrasion and chemical resistant
› 180°F – continuous temperature resistance
› 220°F – non-continuous temperature resistance
› Anti-slip properties
› Contains Polygiene for antimicrobial protection
› 220°F – continuous temperature resistance
› 250°F – non-continuous temperature resistance
Carbocrete Cove completes your Carbocrete system to ensure maximum protection against chemicals and bacteria.
Carbocrete Cove
Carbocrete SL
Aggregate Broadcast
Carbocrete FCUV**Or other topcoat as
specified by Carboline
CARBOCRETE
Performance Attributes
Recommended Areas for Use
Standard Colors
RESISTANT TO CHEMICAL ATTACK
Hydrochloric Acid 10% Methanol Sulphuric Acid 10% Sugar Syrups Citric Acid 10% Caustic Soda Acetic Acid 5% Petrol Lactic Acid 10% Oil Ingredients Phosphoric Acid 5% Detergents
INHIBITS BACTERIAL GROWTH
SARS-CoV Salmonella Typhi MRSA Enterococcus Faecalis E-coli Staphylococcus Aureus Listeria Streptococcus Pyogenes C.difficile Pseudomonas Aeruginosa Proteus Vulgaris Campila Bacta
Carbocrete HF/RT Carbocrete MF Carbocrete SR Carbocrete SL Carbocrete IF
Temperature Resistance (continuous) 220°F 180°F 200°F 180°F 220°F
Dry Process (light to medium traffic) Dry Process (medium to heavy traffic) Wet Process (light to medium traffic) Wet Process (medium to heavy traffic) Industrial Kitchens / Wash Areas Packaging Areas Chemical / Solvent Storage Loading Docks Laboratories Cold Rooms / Freezers Heavy Manufacturing / High Impact Areas
Colors shown are ink representation of actual colors. Actual product appearance may vary due to product, gloss, surface texture or method of application. Contact Carboline if a representative product sample is needed.
Khaki (Q205)
Green (Q302)
Cream (Q202) Tan (Q204) Safety Yellow (Q603)
Dark Gray (Q704)Mid Gray (Q703) Red (Q501)
CARBOCRETE
Additional ProductsURETHANE CEMENT PRODUCTS DESCRIPTION USES
Carbocrete IF An extreme, heavy duty, iron filled urethane cement flooring system (contains Polygiene).
Used wherever heavy impact, high thermal shock or high MVT conditions exist.
Carbocrete MF A medium duty, urethane cement flooring system with a smooth, matte finish (contains Polygiene).
Used to protect dry process areas, packaging areas and laboratories.
Carbocrete FCAn optional, urethane cement primer for porous concrete/outgassing concerns or a semi flexible, urethane cement, pigmented sealer (contains Polygiene).
Used as a complimentary urethane cement primer or sealer. Typical topcoat for Carbocrete SR and Carbocrete SL flooring systems.
Carbocrete FCUV A UV stable, semi-gloss, urethane cement floor sealer (contains Polygiene).
Used as a complimentary, UV resistant urethane cement sealer.
Carbocrete SR Sealer A pigmented, polyurethane sealer for broadcast systems (contains Polygiene).
Used as a lock coat for Carbocrete SR or Carbocrete SL urethane cement flooring systems.
CONCRETE REPAIR DESCRIPTION USES
Carbocrete 4000 A cement based, high performance underlayment (trowel applied).
Used for sloping and patching floors. Protein-free formulation prevents the growth and spread of bacteria.
Carbocrete Fill A rapid setting, urethane cement underlayment. Used to repair damaged floor slabs or to create floor sloping.
Carboseal Flex Joint A UV resistant, 100% solids, semi-rigid polyurea joint sealant.
Used to fill construction joints, to protect joint edges and to seal open joints. It increases the life of your floor by reducing the areas where bacteria can grow.
Carboguard 501 A solvent free epoxy patching and surfacing compound.Used for repairing damaged concrete and for filling in narrow cracks. It can also be used as coving material for floor-to-wall transitions or lap joint areas.
EPOXY PRIMERS DESCRIPTION USES
Carboseal 702 A multi-purpose, 100% solids, thixotropic epoxy resin system.
Used as a thixotropic vertical primer, grout coat, binder and primer for cove base.
Carboseal 710 A specially formulated, trowel applied epoxy mortar system. Used for high traffic areas. Pigment Packs can be added if a color is desired.
Carboseal 720 A low viscosity, 100% solids epoxy primer for cement surfaces.
Used for priming concrete as part of an industrial flooring system.
Carboguard 1340 WB A two-component, waterborne epoxy primer Effective damp concrete substrates prior to topcoats that might otherwise be compromised by any surface moisture.
BINDERS/SEALERS/TOPCOATS DESCRIPTION USES
Sanitile 555 VOC A high performance, water based epoxy coating. Used as a water based epoxy topcoat or receiving coat for decorative flakes.
Carboseal 705 A high performance, 100% solids, self- priming epoxy floor coating.
Used as a receiving and seal coat for decorative broadcast floors. Universal Color Packs can be added if a color is desired.
Carboseal 725 A low viscosity, 100% solids epoxy resin binder and sealer with improved UV resistance and performance properties.
Used as a finish coat for color quartz or decorative flake systems.
Carboseal 816 A high-gloss, low odor polyurethane finish coat. Used as a UV resistant, pigmented polyurethane floor sealer for concrete, screeds or epoxy resin systems.
Carboseal 816 HAR An abrasion-resistant, low odor polyurethane finish coat. A lower gloss urethane that provides excellent abrasion resistance and protection for flooring systems.
Carboseal 985 A fast cure, polyaspartic coating that imparts excellent UV and chemical protection.
Used as a fast curing, UV stable sealer or receiving coat for flake and quartz broadcast systems.
GLOBAL MANUFACTURING PLANTS
GLOBAL REPRESENTATIONCoatings - Linings - Fireproofing
CARBOLINE COMPANYGLOBAL HEADQUARTERS2150 SCHUETZ ROADST. LOUIS, MO 63146 USAPH: +1-314-644-1000WWW.CARBOLINE.COM
ARGENTINA – BUENOS AIRESEINSTEIN 1095PARQUE INDUSTRIAL OKSGARÍN PROV. DE BUENOS AIRES, ARGENTINAPHONE: 54-3327-44-2222FAX: 54-3327-44-2223
CANADA – ONTARIO420 TAPSCOTT ROAD UNIT 5 SCARBOROUGH, ONTARIO M1B 1Y4, CANADAPHONE: 416-292-2361FAX: 416-298-5887
CHINA – DALIANHOU SHI CUN, DA WEI JIA ZHENJIN ZHOU DISTRICTDALIAN, CHINA 116110PHONE: 86-411-8789-8441, 8442, 8443, 8444FAX: 86-411-8789-8445
INDIA – CHENNAINO. 356 & 357 SIDCO INDUSTRIAL ESTATEAMBATTUR, CHENNAI 600 098INDIAPHONE: 91-22-28500321FAX: 91-22-28500323
INDONESIAPT CARBOLINE INDONESIA SOLUSIWISMA 77, TOWER 1 – 12TH FLJL. LETJEN S PARMAN KAV 77SLIPI, JAKARTA BARATINDONESIA 11410PHONE: +62-21-536-3070
ITALY – ALGHEROVIA MILANO 15020093 COLOGNO MONZESE (MI), ITALYPHONE: 3902-25 3751FAX: 3902-25 37560
JAPAN – AMAGASAKITERAMOTO UNYU SOKO CO., LTD 17MINAMIHATSUSHIMA-CHO, AMAGASAKI, 660-0833 JAPANPHONE: 81-3-3643-4501FAX: 81-3-3643-2951
NEW ZEALAND – TAURANGA91-111 OROPI ROADGREERTONTAURANGANEW ZEALANDPHONE: +64-7-5411-221FAX: +64-7-541-1310
NORWAY – LIERSTRANDAP.O. BOX 5933412 LIERSTRANDA, NORWAYPHONE: 47-32-857300FAX: 47-32-857301
PUERTO RICO – SAN LORENZOURB. APONTE #5SAN LORENZO, PUERTO RICO 00754PHONE: 787-736-4221FAX: 787-736-53133
SAUDI ARABIA – DAMMAM1ST INDUSTRY CITY, 28TH STREETP.O. BOX 1050 DAMMAM 31431, KINGDOM OF SAUDI ARABIAPHONE: +966-3-847-3044FAX: +966-3-847-3689
SOUTH AFRICA – JOHANNESBURG8 CRESSET ROADMIDRAND INDUSTRIAL PARKJOHANNESBURG, SOUTH AFRICAPHONE: 27-11-2545500FAX: 27-11-310-2872
SOUTH KOREA – BUSAN43-1, JINYOUNG-RIJINYOUNG-EUBKIMHAE-CITY, 621-800KYOUNGSANGNAMDO, KOREAPHONE: 82-55-343-6441/5FAX: 82-55-343-6414
THAILANDDIMET (SIAM) PUBLIC COMPANY LIMITED.602 MOO 2 BANGPOO INDUSTRIAL ESTATEBANGPOOMAI, MUANGSAMUTPRAKARNTHAILANDPHONE: 66-2-323-2800
TURKEY – BURSAALI OSMAN SONMES CAD. NO:4BURSA, DOSAB 16369 TURKEYPHONE: 90-224-261-0537
UAE – DUBAIP.O. BOX 3034DUBAI, UAEPHONE: 971-4-347-0460FAX: 971-4-347-0242
USA – DAYTON 95 AIRPARK VISTA BLVD.DAYTON, NV 89403PHONE: 775-246-0760FAX: 775-246-0763
USA – GREEN BAY614 ELIZABETH STGREEN BAY, WI 54302PHONE: 920-437-6561FAX: 920-437-8546
USA – LAKE CHARLES900 OPELOUSAS STREETLAKE CHARLES, LA 70601PHONE: 337-433-0605FAX: 337-439-0380
USA – LOUISA321 DUKE ST.LOUISA VA 23093 PHONE: 540-967-5119FAX: 540-967-5120
VENEZUELA – VALENCIAURBANIZACION INDUSTRIAL “EL TIGRE”AVENIDA PRINCIPALGALPÓN “H”VALENCIA EDO. CARABOBOVENEZUELAPHONE: 58-245-4000400FAX: 58-245-5642011
VIETNAM –TINH BINH DUONGLO D, 4R-CNKHU CONG NGNIEP MY PHUOC 3THI XA BEN CATVIETNAMPHONE: (84) 08-3822-7684
12-46-0819-660