Upload
regal-carbide-dies
View
219
Download
0
Embed Size (px)
Citation preview
7/30/2019 Carbide Die Maker
1/22
INTRODUCTION TOREGAL CARBIDE DIES PVT LTD
Address:Block-A,Shed No-9DSIDC Work Centre
Jhilmil Colony,Delhi,Indiahttp:// www.regaldies.com
http://carbidediemaker.comPh: +919811312738Email : [email protected]
http://carbidediemaker.com
http://regaldies.com/http://carbidediemaker.com/http://carbidediemaker.com/http://carbidediemaker.com/http://carbidediemaker.com/http://regaldies.com/7/30/2019 Carbide Die Maker
2/22
T.C WIRE DRAWING DIES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
3/22
T. C . DIES
Dies for wire draw of copper, M.S , S. S ,Al,brass and other alloys
Dies for Co2 wire / mig wire drawing
Dies for Aluminium cladded steel wire
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
4/22
PCD DIES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
5/22
PCD DIES
Used for wire drawing of copper ,Aluminium , Aluminium Alloys
Wire draw of S.S , M.S in small sizes
Used in compacting dies in cable industry
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
6/22
T.C PLUGS & MANDRELS FORTUBE DRAW DIES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
7/22
T.C TUBE DRAW DIES ANDPLUGS
Tube draw dies for tube sinking as well astube drawing.
T.C plugs of all types, like fixed type,floating type for accurate I.D of the Tube.
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
8/22
T.C SECTION DIES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
9/22
T C SECTION DIES
We make T.C section dies used for makingstrips , other shapes used in bus bar makng,extrusion of various odd sizes.
All dies are made as per clients drawings orsamples.
Good accurate sizes are maintained.
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
10/22
T.C COMPACTING DIE
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
11/22
T . C COMPACTING DIES
T.C Compacting dies are made for cableindustry.
Compacting dies are also made forstranding of steel wire.
Can be made in single piece or split type.
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
12/22
FLUX COATING DIES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
13/22
FLUX COATING DIES
T.C coating dies are used for coating of fluxon the electrode wire.
Our dies offer good surface finish
Good Production is guaranteed from ourdies.
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
14/22
EXTRUSION NOZZLES & OTHERTOOLINGS FOR ELECTRODE
PLANTS
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
15/22
CARBIDE WIRE FEED ROLLERS
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
16/22
Tooling for Electrode Plants
We offer T.C sleeves
T.C Extrusion Nozzles
Spinner DiesCarbide rollers
Wire feed Rollers
Cutters
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
17/22
T. C EYELETS / WIRE GUIDES /FERRULES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
18/22
T.C Eyelets
T C Eyelets / Ferrules/ Wire guides are usedin stranding machines.
All types of eyelets are made as per clientsorders.
Can be step type , or OD taper type.
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
19/22
CARBIDE LINED GUIDE BUSH &COLLETS
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
20/22
Collet & Guide Bush
Carbide lined guide bushes and collets aremade as per clients drgs or samples
Many types of guidebushes are made ofSwiss type sliding head machines likeStrohm, Tornos, Petermann, Star, Behleretc.
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
21/22
DIAMOND FILES
http://carbidediemaker.com
7/30/2019 Carbide Die Maker
22/22
Consumables
Diamond files
Diamond Powder
Diamond PasteBoron Carbide Powder
Angle pins
http://carbidediemaker.com