CARBIDE CuttIng - Welcome to Thomas Skinner! · CARBIDE CuttIng ORDER ONLINE @ 67 MFG # DIMENsIONs DC ORDER # DMM / DCsFMs LF Lu ApMX MAX RpM Coromant capto R390D -020C5-11L125 2

CARBIDE CuttIng

63

Solid Carbide & Indexable Cutting Tools

Brazed Tool Bits ........................................................................... 134Chamfer Mills ............................................................................... 135Chamfering & Centre-Drilling ....................................................... 135Die Mold Cutters .......................................................................... 129Indexable Drilling ......................................................................80-83Indexable Milling .......................................................................64-79Indexable Parting & Grooving ...............................................103-108

Indexable Threading .............................................. 109-113, 117-118Indexable Threading & Grooving ...........................................114-116Indexable Turning....................................................................90-102Solid Carbide Burrs ...................................................................... 133Solid Carbide Centre Drills ........................................................... 130Solid Carbide Drills ................................................... 84-89, 129-132 Solid Carbide End Mills .................................................120-129, 131Solid Carbide Engraving Blanks ................................................... 130 Solid Carbide Threadmilling ......................................................... 119Spot Drills .................................................................................... 135

ORDER ONLINE @ www.thomasskinner.com64

Carbide Cutting

Three different cutter pitches with differential pitch

Coromant Capto coupling, HSK, weldon, CIS-Arbor, Arbor and cylindrical toolholders

Standard sizes available.750 - 10.000"(20 - 250mm)

Insert size 08Max depth .216" (5.5mm)Recommended .157" (4mm)

Insert size 14Max depth .394" (10mm)Recommended .276" (7mm)

Secure insert bottom

True four edges

Insert chip breaker geometry

CoroMill 490New generation face & shoulder mills

Milling

CoroMill 490, the first of a new generation of highly accurate milling tools, reduces production costs in face and shoulder milling by 25%, especially for small and medium batch operations with small depths of cut. The tool offers milling customers markedly lower tool costs and inventories, greater flexibility, high precision and tighter tolerances.CoroMill 490 uses four-edged inserts with outstanding insert geometries and new generation high performance grades. These require less force for cutting and give sharp edge lines and an exceptional surface finish. The result is a smooth profile, requiring less finishing than before, with lower sound in the machine shop.The insert geometry and the New Insert Generation grades make this the first cutter with a true 90o square cut without sharp steps.• Reducesproductioncostsby25%• Lightcutting,lessforce• Predictable,consistentcutting,lessfinishing• Lowvibration,lowsound• Idealforsmalldepthsofcut• Sharpedgelines,smoothprofiles,nomismatch• True90o square cut

INsERtsSold in

packages of 10

Cutting data recommendations on the insert box make it easy to program.

P M K n S H

COND-ItION MFG #

INsERt sIZE GRADE

DIMENsIONsORDER #Bs RE

LIGH

T

490R -08T304M-PL 08 GC1030 .059" .016" SAN-43130-08T304M-PL 08 GC4240 .059" .016" SAN-43131-08T308M-PL 08 GC1030 .047" .032" SAN-43134-08T308M-PL 08 GC4230 .047" .032" SAN-43135-140408M-PL 14 GC1030 .079" .032" SAN-52621-140408M-PL 14 GC4230 .079" .032" SAN-52623

MED

IUM

-08T308M-PM 08 GC1030 .047" .032" SAN-41627-08T308M-PM 08 GC4230 .047" .032" SAN-43137-08T308M-PM 08 GC4240 .047" .032" SAN-41626-08T312M-PM 08 GC1030 .034" .047" SAN-43138-08T316M-PM 08 GC1030 .024" .063" SAN-43140-140408M-PM 14 GC1030 .079" .032" SAN-52626-140412E-MM 14 GC1040 .063" .047" SAN-53953-140412M-PM 14 GC1030 .079" .047" SAN-54923-140412M-PM 14 GC4230 .079" .047" SAN-54926-140412M-PM 14 GC4240 .079" .047" SAN-54927-140416M-PM 14 GC1030 .079" .063" SAN-54929-140416M-PM 14 GC4230 .079" .063" SAN-54932-140416M-PM 14 GC4240 .079" .063" SAN-54933

HEAV

Y

-08T308M-PH 08 GC1030 .047" .032" SAN-45302-08T308M-PH 08 GC4230 .047" .032" SAN-43132-08T308M-PH 08 GC4240 .047" .031" SAN-43133-08T316M-PH 08 GC1030 .024" .063" SAN-43139-140408M-PH 14 GC1030 .079" .032" SAN-53945-140408M-PH 14 GC4220 .079" .032" SAN-53948-140408M-PH 14 GC4230 .079" .032" SAN-53949-140408M-PH 14 GC4240 .079" .032" SAN-53950

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=SAN-43130



























CARBIDE CuttIng

ORDER ONLINE @ www.thomasskinner.com 65

Arbor

squARE shOuLDER END MILLs & FACE MILLsInch design

Standard sizes available .750 - 10.000" (20 - 250mm)

CoroMill 490MIllIng

spARE pARts

Coarse Pitch and Extra Close Pitch available

Accessories must be ordered separately

For a complete assortment of products check out Sandvik’s website

www.sandvik.coromant.com.

For pricing call our Customer Service Teamat 1-866-999-3117.

Weldon

Cylindrical

CuttERINsERt

sIZE DCsCREW tORquE WRENCh

MFG # ORDER # MFG # ORDER #A490 08 .750 - 5.000" 5513 020-35 SAN-08782 5680 100-03 (8IP) SAN-08785

14 1.500 - 2.000"5513 020-72 SAN-52647 5680 100-06

(15IP) SAN-2520614 2.500 - 10.000"

CuttERINsERt

sIZE DCshIM shIM sCREW

MFG # ORDER # MFG # ORDER #A490 08 .750 - 5.000" - -

14 1.500 - 2.000" - -14 2.500 - 10.000" 5322 471-01 SAN-52646 5512 090-01 SAN-40556

MFG #

DIMENsIONs

ORDER #DCDCB/ DMM LF ApMX

MAX RpM

Arbor mount face millsA490 038R19-08M - 4 1.500" .750" 1.575" .216" 30,200 SAN-41949

051R19-08M - 5 2.000" .750" 1.575" .216" 25,200 SAN-41592063R25-08M - 6 2.500" .750" 1.969" .216" 22,100 SAN-41957076R25-08M - 8 3.000" 1.000" 1.969" .216" 19,900 SAN-41959102R38-08M - 8 4.000" 1.500" 1.969" .216" 17,000 SAN-48467127R38-08M - 10 5.000" 1.500" 2.480" .216" 15,100 SAN-48473051R19-14M - 4 2.000" .750" 1.575" .394" 13,600 SAN-50978063R25-14M - 5 2.500" 1.000" 1.696" .394" 11,700 SAN-50998076R25-14M - 6 3.000" 1.000" 1.969" .394" 10,400 SAN-51011102R38-14M - 7 4.000" 1.500" 1.969" .394" 8,800 SAN-51024127R38-14M - 8 5.000" 1.500" 2.480" .394" 7,700 SAN-51036152R38-14M - 12 6.000" 1.500" 2.480" .394" 7,000 SAN-51039203R63-14M - 16 8.000" 2.500" 2.480" .394" 6,000 SAN-51043254R63-14M - 18 10.000" 2.500" 2.480" .394" 5,300 SAN-51046

Weldon shank end millsA490 025M19-08M 3 - 1.000" .750" 2.485" .216" 40,000 SAN-41937

025M25-08M 3 - 1.000" 1.000" 2.610" .216" 40,000 SAN-41589032M32-08M 4 - 1.250" 1.250" 2.610" .216" 34,100 SAN-41943038M32-08M - 4 1.500" 1.250" 2.860" .216" 30,200 SAN-41947038M32-14M 3 - 1.500" 1.250" 2.860" .394" 27,400 SAN-50948

Cylindrical shank end millsA490 025O25L-08M 3 - 1.000" 1.000" - .216" 12,100 SAN-41940

038O32L-14M 3 - 1.500" 1.250" - .394" 7,400 SAN-50955















://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=SAN-51011














CARBIDE CuttIng

CoroMill 390shoulder milling cuttersComprehensive concept for deep or shallow shoulder milling

MIllIngStandard sizes available

.500 - 8.000"(12 - 200mm)

Insert size 11

.394"

Geometries:

Condition: Lightcutting General High security

**For aluminum only & non-ferrous

Sold in packages of 10

P M K n S H

Insert sizes 17 and 18 .618"

pRODuCtIVItY• Largedepthofcutandsteeprampingcapabilities• Feedpertoothupto.014"• Wideandoptimizedchippocketdesignwithcompressed

air through the cutter body provides excellent chip evacuation, even at high removal rates and in long chipping materials

• Secureinsertgeometriesandgrades,optimizedbyapplication, make high removal rates a reality

EAsY-tO-usE• Selflocatinginserts• Torxplusscrewandkeyforamoresecuregripand

stronger insert clamping• Torquewrenchwithergonomichandleandaclick

function for correct torque value - no risk of over-tightening

VERsAtILItY• Minimummismatchwithrepeatedpasses• Excellentperformanceinopenandclosedslotting,edging,

face and cavity milling operations• Steepramping,plungemillingandlimiteddrilling

capability• Millingclosetofixtures• DesignedforhighspeedmachiningBuILt-IN pRECIsION• Cutterbodiesaremachinedfromhardenedsteelresulting

in close tolerances and high strength• Long,evenandpredictableinsertlife• Excellentsurfacefinishachievedalsoathighfeeds• Precisiongroundinserts

INsERts

Need additional information?Check out Sandvik’s website www.sandvik.coromant.com.


COND-ItION MFG #

INsERt sIZE GRADE

DIMENsIONsORDER #RE LE W1 s Bs αo

LIGH

T

R390 -11T304E-NL** 11 H13A .016" .433" .268" .141" .035" 21 SAN-23913-11T308E-KL 11 H13A .032" .433" .268" .141" .059" 21 SAN-16587-11T308E-ML 11 GC1040 .032" .433" .268" .141" .059" 21 SAN-53394-11T308E-NL** 11 H13A .032" .433" .268" .141" .059" 21 SAN-23914-11T308M-PL 11 GC1030 .032" .433" .268" .141" .047" 21 SAN-08225-11T308M-PL 11 GC4240 .032" .433" .268" .141" .047" 21 SAN-33459-170408E-KL 17 H13A .032" .669" .378" .188" .059" 19 SAN-16571-170408E-ML 17 GC1040 .032" .669" .378" .188" .059" 19 SAN-53406-170408E-NL** 17 H13A .032" .669" .378" .188" .059" 19 SAN-23917-170408E-PL 17 GC1030 .032" .669" .378" .188" .059" 19 SAN-16573-170408M-PL 17 GC1030 .032" .669" .378" .188" .059" 19 SAN-08226-170431E-NL** 17 H13A .122" .669" .378" .188" - 19 SAN-23919

MED

IUM

-11 T3 04M-PM 11 GC4240 .016" .433" .268" .141" .035" 21 SAN-33456-11 T3 08M-MM 11 GC1040 .032" .433" .268" .141" .047" 21 SAN-53395-11 T3 08M-PM 11 GC1030 .032" .433" .268" .141" .047" 21 SAN-08231-11 T3 08M-PM 11 GC4230 .032" .433" .268" .141" .047" 21 SAN-36450-11 T3 08M-PM 11 GC4240 .032" .433" .268" .141" .047" 21 SAN-33461-11 T3 16M-PM 11 GC1030 .063" .433" .268" .141" .016" 21 SAN-33468-11 T3 16M-PM 11 GC4240 .063" .433" .268" .141" .016" 21 SAN-33469-11 T3 20E-PM 11 GC1030 .079" .433" .268" .141" - 21 SAN-33470-11 T3 20E-PM 11 GC4240 .079" .433" .268" .141" - 21 SAN-33471-11 T3 31E-PM 11 GC1030 .122" .433" .268" .141" - 21 SAN-33474-11 T3 31E-PM 11 GC4240 .122" .433" .268" .141" - 21 SAN-33475-17 04 08M-KM 17 GC1020 .032" .669" .378" .188" .059" 19 SAN-35431-17 04 08M-KM 17 H13A .032" .669" .378" .188" .059" 19 SAN-08268-17 04 08M-MM 17 GC1040 .032" .669" .378" .188" .059" 19 SAN-53407-17 04 08M-PM 17 GC1030 .032" .669" .378" .188" .059" 19 SAN-08232-17 04 08M-PM 17 GC4230 .032" .669" .378" .188" .059" 19 SAN-36471-17 04 08M-PM 17 GC4240 .032" .669" .378" .188" .059" 19 SAN-33488-17 04 16M-PM 17 GC1030 .063" .669" .378" .188" .028" 19 SAN-33493-17 04 16M-PM 17 GC4240 .063" .669" .378" .188" .028" 19 SAN-33494-17 04 31E-PM 17 GC1030 .122" .669" .378" .188" - 19 SAN-33499-17 04 31E-PM 17 GC4240 .122" .669" .378" .188" - 19 SAN-33500-17 04 64E-PM 17 GC1030 .250" .669" .378" .188" - 19 SAN-33510-17 04 64E-PM 17 GC4240 .250" .669" .378" .188" - 19 SAN-33511

HEA-

VY

-17 04 08M-PH 17 GC4240 .032" .669" .378" .188" .059" 19 SAN-33484-17 04 08M-KH 17 GC1020 .032" .669" .378" .188" .059" 19 SAN-35429






































CARBIDE CuttIng


MFG #

DIMENsIONs

ORDER #DCDMM /

DCsFMs LF Lu ApMXMAX RpM

Coromant captoR390D -020C5-11L125 2 20mm 50mm 125mm 100mm 10mm 21,000 SAN-37947

-020C6-11L165 2 20mm 63mm 165mm 60mm 10mm 20,000 SAN-37948Cylindrical shankR390D -020A20-11L 2 20mm 25mm 195mm 125mm 10mm 23,000 SAN-37946

Arbor

END MILL & squARE shOuLDER FACE MILL CuttERsInch design


Machine tools: All types

CoroMill 390MIllIng

Coarse Pitch, Close Pitch and Extra Close Pitch available


END MILL & squARE shOuLDER FACE MILL CuttERs - DAMpENED

Coarse pitch and Extra Close Pitch available

Cylindrical shank

Coromant Capto

Weldon

Cylindrical

squARE shOuLDER END MILL & FACE MILL spARE pARts

MFG #

DIMENsIONs

ORDER #DCDCB/ DMM LF Lh ApMX

MAX RpM

Arbor mount face mills - close pitchRA390 -038R19-11M 4 1.500" .750" 1.575" - .394" 22,700 SAN-16449

-051R19-11M 5 2.000" .750" 1.575" - .394" 23,500 SAN-16451-051R19-17M 4 2.000" .750" 1.575" - .618" 18,800 SAN-16458-063R19-11M 6 2.500" .750" 1.575" - .618" 20,700 SAN-16453-063R19-17M 5 2.500" .750" 1.575" - .618" 16,500 SAN-16461-076R25-11M 7 3.000" 1.000" 1.969" - .394" 18,700 SAN-16455-076R25-17M 6 3.000" 1.000" 1.969" - .618" 14,800 SAN-16464-102R38-17M 7 4.000" 1.500" 1.969" - .618" 12,600 SAN-10415-127R38-17M 8 5.000" 1.500" 2.480" - .618" 11,200 SAN-10418

Weldon shank end mills - close pitchRA390 -019M19-11M - .750" .750" 2.335" 1.020" .394" 35,900 SAN-08217

-025M19-11M - 1.000" .750" 2.485" 1.468" .394" 36,100 SAN-08218-025M25-11M - 1.000" 1.000" 2.610" 1.250" .394" 36,100 SAN-08219-032M32-11M - 1.250" 1.250" 2.610" 1.350" .394" 31,200 SAN-08220-032M32-17M - 1.250" 1.250" 2.860" 1.580" .618" 25,700 SAN-08223-038M32-17M - 1.500" 1.250" 3.360" 1.750" .618" 22,700 SAN-08224

Cylindrical extra long shank end mills - coarse pitchRA390 -016O16L-11L 2 .625" .625" 5.700" 1.375" .394" 5,700 SAN-03076

-019O19L-11L 2 .750" .750" 6.500" 1.625" .394" 10,900 SAN-03077-025O25L-11L 2 1.000" 1.000" 8.000" 2.125" .394" 8,100 SAN-03078-025O25L-17L 2 1.000" 1.000" 8.000" 2.125" .618" 8,100 SAN-03084-032O32L-17L 2 1.250" 1.250" 9.000" 2.625" .618" 9,100 SAN-03087-038O32L-17L 2 1.500" 1.250" 9.000" - .618" 9,100 SAN-03105

CuttERINsERt

sIZE DCsCREW tORquE WRENCh

MFG # ORDER # MFG # ORDER #RA390 11 .500 - .750"

5513 020-36 SAN-08783 5680 100-3 SAN-25480R390 11 12 - 22mmRA390 11 1.000 - 3.000"

5513 020-35 SAN-08782 5680 100-3 SAN-25480R390 11 25 - 80mmRA390 17 1.000"

5513 020-37 SAN-08784 5680 100-06 SAN-25206R390 17 25mmRA390 17 1.250 - 5.000"

5513 020-39 SAN-16499 5680 100-06 SAN-25206R390 17 32 - 125mmRA390 18 2.000 - 8.000" 5513 020-29 SAN-50952 5680 100-06 SAN-25206










ww.thomasskinner.com/default.aspx?page=item+detail&itemcode=SAN-16464

























CARBIDE CuttIng

Standard sizes available 3.150 - 12.000"(80 - 315mm)

Full slot Cassette version

ar<4.311"

ap=.236 - 1.043"

Wide setting range

ar<.850"

ap=.250 - .500"

Full slot Fixed pocket version

Half side

ar<4.311"

ap<.417"

Full slot Cassette version

ar<4.311"

ap=1.071 - 1.331"

Geometries:

General

fz=.002" .016"

CoroMill 331Multi-purpose side & face milling cutterhigh precision capability

MIllIng

pRODuCtIVItY• Feedpertoothupto.016"• Easychipflowduetowideopenpockets• Secureinsertgeometriesandgrades,optimizedbyapplication,make

high removal rates a reality• LonglastingcutterbodywithprecisionthatresistsheavyloadsEAsY-tO-usE• Selflocatinginserts• Orderingandapplicationinformationpermanentlymarkedoncutter

bodies and inserts• Springloadedcassettesmakesettingeasy,fastandaccurate• RecommendedstartvaluesforfeedsandspeedsontheinsertboxVERsAtILItY• Generalslottingandpartingoff• Boringbyhelicalinterpolation• Backfacingcapability• Widesettingrange• Vastprogramofcornerradii• Roundinsertsforhighandsafemetalremoval

BuILt-IN pRECIsION• Machinedfromhardenedsteelresultinginclosetolerancesandhigh

strength• Springloadedcassettesgiveminimalinsertrunoutandthereforeequal

cutting conditions for all inserts - result... predictable and long cutting edge life

• Precisiongroundinsertsforevengreateraccuracy

ONLY 5 INsERt sIZEs NEEDEDA comprehensive programme of standard and Tailor Made inserts for the manufacturing of all types of grooves, shoulders, back faces and bores.

Insert size 04 05 08 11 14 Groove width (ap)Min width 6.0mm 8.0mm 10.0mm 15.0mm 20.5mm .236" .315" .394" .591" .807"

CARBIDE CuttIng


FuLL sIDE & FACE MILL CuttERs WIth ADjustABLE pOCkEtsInch design

Standard sizes available 3.150 - 12.000" (80 - 315mm)

Positive rake

CoroMill 331MIllIng

Sold in packages of 10**For aluminum only & non-ferrous

FuLL sIDE & FACE MILL CuttERs WIth FIXED pOCkEtsInch design/Metric design


Positive rake

INsERts

P MK nS H

For a complete assortment of products check out Sandvik’s website www.sandvik.coromant.com.

For pricing call our Customer Service Team at 1-866-999-3117.


Weldon

COND-tION MFG # GRADE

DIMENsIONs

ORDER #INsERt

sIZE LE L W1

LIGH

T

N331.1A -043505H-ML GC1040 04 .181" .201" .374" SAN-53159-043505H-NL** H10 04 .181" .201" .374" SAN-27645-043505H-PL GC4230 04 .181" .201" .374" SAN-37528-054508H-ML GC1040 05 .224" .256" .374" SAN-53161-054508H-NL** H10 05 .224" .256" .374" SAN-27647-054508H-PL GC4230 05 .224" .256" .374" SAN-37561-084508H-ML GC1040 08 .303" .335" .374" SAN-53163-084508H-NL** H10 08 .303" .335" .374" SAN-27649-084508H-PL GC4230 08 .303" .335" .374" SAN-37581

MED

IUM

N331.1A -043505H-MM GC1040 04 .181" .201" .374" SAN-53160-043505M-PM GC4230 04 .181" .201" .374" SAN-37530-054508M-PM GC4230 05 .224" .256" .374" SAN-37567-084508H-MM GC1040 08 .303" .335" .374" SAN-53164-084508M-PM GC4230 08 .303" .335" .374" SAN-37596

MFG #

DIMENsIONs

ORDER #INsERt

sIZE DC DMM ApMXCutters with bore with keywayN331.32 -080T25CM 6 04 3.150" 1.000" .236 - .315" SAN-08796

-101T32CM 8 04 4.000" 1.250" .236 - .315" SAN-08797-127T38CM 10 04 5.000" 1.500" .236 - .315" SAN-08798-152T38CM 12 04 6.000" 1.500" .236 - .315" SAN-08799-203T51CM 16 04 8.000" 2.000" .236 - .315" SAN-08800-080T25DM 6 05 3.150" 1.000" .312 - .394" SAN-01827-101T32DM 8 05 4.000" 1.250" .312 - .394" SAN-01836-127T38DM 10 05 5.000" 1.500" .312 - .394" SAN-01850-152T38DM 12 05 6.000" 1.500" .312 - .394" SAN-01868-203T51DM 16 05 8.000" 2.000" .312 - .394" SAN-01893

MFG #

DIMENsIONs

ORDER #INsERt

sIZE DC AR DMM Lh Lu ApMXWeldon shank face mills - inch designR331.35 -038M25CMA04 4 04 1.500" .409" 1.000" 4.142" 1.500" .250" SAN-13728

-051M25CMA04 6 04 2.000" .583" 1.000" 4.142" 1.500" .250" SAN-13732-063M32CMA04 6 04 2.500" .732" 1.250" 4.142" 1.500" .250" SAN-13736-076M32CMA04 8 04 3.000" .850" 1.250" 4.142" - .250" SAN-13740-038M25DMA05 4 04 1.500" .409" 1.000" 4.142" 1.500" .312" SAN-13729-051M25DMA05 6 04 2.000" .583" 1.000" 4.142" 1.500" .312" SAN-13733-063M32DMA05 6 04 2.500" .732" 1.250" 4.142" 1.500" .312" SAN-13737-076M32DMA05 8 04 3.000" .850" 1.250" 4.142" - .312" SAN-13741-038M25EMA06 4 05 1.500" .409" 1.000" 4.142" 1.500" .375" SAN-13730-051M25EMA06 6 05 2.000" .583" 1.000" 4.142" 1.500" .375" SAN-13734-063M32EMA06 6 05 2.500" .732" 1.250" 4.142" 1.500" .375" SAN-13738-076M32EMA06 8 05 3.000" .850" 1.250" 4.142" - .375" SAN-13742-038M25EMA08 4 08 1.500" .409" 1.000" 4.142" 1.500" .500" SAN-13731-051M25EMA08 6 08 2.000" .583" 1.000" 4.142" 1.500" .500" SAN-13735-063M32EMA08 6 08 2.500" .732" 1.250" 4.142" 1.500" .500" SAN-13739-076M32EMA08 8 08 3.000" .850" 1.250" 4.142" - .500" SAN-13743










































CARBIDE CuttIng

Pitch:

Up to .240" (6mm)

ap

Roughing to mirror finishingInsert size - 12

Up to .394" (10mm)

ap

Demanding milling with highest securityInsert size - 18

General

Unstable General Stable

Pitch:

Condition: General Stable


Custom orders up to 20.000"

INsERt sIZE 12

INsERt sIZE 12 OR 18

INsERt sIZE 18

Condition:

FEAtuREs:• CoroMill245isthefirstchoiceforfacemillinginmostmaterials,fromroughing

to finishing; it combines high metal removal rates with good surface finish, which often eliminates a subsequent finishing operation; the close pitch cutter is the first choice for an ISO 40 machine

• TheCoroMill245generatesanexcellentsurfacefinishifthefeedperrevdoesnot exceed 80% of the parallel land (lbs); the standard inserts have a .079" lbs value; wiper inserts can be used for higher feed rates

• Usehighcuttingspeedsand/orthecermetgradeCT530toobtainshinysurfaces• Useacoolantoroilmistforstickymaterials(ISOMandS)• Forthebestsurfaces,usePVDcoatedinsertswithsharpcuttingedgesanda

depth of cut of .020" to .031"• ChooseCoroMill245tominimizevibrationtendencies,becausealargepartof

the cutting forces are directed axially• Depthofcutupto.236"and.394"respectively• Feedpertoothupto.016"/edge• Availableascoarse,closeandextraclosepitchformaximumperformancein

different conditions• Longlastingcutterbodywithprecisionthatresistsheavyloads• Secureinsertgeometriesandgrades,optimizedbyapplication,makehigh

removal rates a reality• Wiperinsertforhighproductivitywithexcellentsurfacefinish• Insertsselflocatingintotheirseats• Toughcarbideshimforcutterbodyprotection

CoroMill 245Light cutting face millsA concept for highest metal removal and mirror finishing

MIllIng

Wiper optionsFor high feed finishing

Carbide Cutting


MFG #

DIMENSIONS

ORDER #DCDCB/ DMM DCX LF APMX

MAX RPM

Arbor mount cuttersRA245 -051R19-12M 4 2.000" .750" 2.492" 1.575" .240" 16,250 SAN-05656

-063R19-12M 5 2.500" .750" 2.992" 1.575" .240" 14,400 SAN-05659-076R25-12M 6 3.000" 1.000" 3.492" 1.969" .240" 12,700 SAN-05662-102R38-12M 7 4.000" 1.500" 4.492" 1.969" .240" 11,300 SAN-05665-127R38-12M 8 5.000" 1.500" 5.492" 2.480" .240" 10,100 SAN-05668-152R38-12M 10 6.000" 1.500" 6.492" 2.480" .240" 8,900 SAN-05671

Weldon / whistle notchRA245 -032MN25-12M 3 1.250" 1.000" 1.742" 2.716" .240" 18,250 SAN-46292

-038MN32-12M 4 1.500" 1.250" 1.992" 2.716" .240" 18,250 SAN-46296-051MN32-12M 4 2.000" 1.250" 2.492" 2.834" .240" 16,250 SAN-46298-063MN32-12M 5 2.500" 1.250" 2.992" 2.834" .240" 14,400 SAN-46298

Coarse Pitch and Extra Close Pitch available




For pricing call our Customer Service Team at

1-866-999-3117.


Extra Positive

Light machining.Low cutting forces.

Low feed rates.

General use in most materials.

Reinforced Cutting Edge

Heavy machining.Highest edge security.

High feed rates.

AL = AluminumSold in packages of 10

P M K n S H

FACE MILL CuttERSInch design


CoroMill 245Milling

FACE MILL CuttERS SPARE PARtS

INSERtS

Weldon/whistle notch

Arbor

CuttER DCINSERt

SIZEINSERt SCREW tORX KEY SHIM SHIM SCREW

HEX KEY (3.5MM)

RA245 1.250 - 10.000" 125513 020-01 5680 048-01 (15IP) 5322 472-01 5512 090-09 5680 010-01

R245 32 - 250mm 12ORDER # SAN-40560 SAN-16500 SAN-46959 SAN-06582 SAN-41451

COND-ItION MFG #

INSERt SIZE GRADE

DIMENSIONSORDER #IC S BS LE RE

LIGHT

R245 -12 T3 E-AL 12 H10 .528” .156” .091” .394” .098” SAN-17637-12 T3 E-KL 12 H13A .528” .156” .079” .394” .059” SAN-47013-12 T3 E-ML 12 GC1040 .528” .156” .083” .394” .059” SAN-53350-12 T3 E-PL 12 GC1025 .528” .156” .083” .394” .059” SAN-47009-12 T3 E-PL 12 GC1030 .528” .156” .083” .394” .059” SAN-33372-12 T3 E-PL 12 GC4230 .528” .156” .083” .394” .059” SAN-37852

MEDIUM

-12 T3 K-MM 12 GC1040 .528” .156” .079” .394” .059” SAN-53351-12 T3 M-KM 12 GC1020 .528” .156” .079” .394” .059” SAN-35340-12 T3 M-PM 12 GC4230 .528” .156” .079” .394” .059” SAN-36445-12 T3 M-PM 12 GC4240 .528” .156” .079” .394” .059” SAN-33375

HEAVY -12 T3 M-PH 12 GC4240 .528” .156” .060” .394” .063” SAN-35342WIPER -18 T6 E-W 18 GC1030 .709” .240” .425” .547” .039” SAN-33376





























CARBIDE CuttIng

Roughing: CoroMill 200/ CoroMill 300

Finishing: CoroMill Plura/ CoroMill Ballnose Finishing

Semi-finishing: CoroMill 300/ CoroMill Ballnose

Geometries:

Lightcutting First choice semi-finishing

General RoughingPitch:

Condition: Unstable First choice roughing

Stable

L M H

Standard sizes available .375 - 4.000"(10 - 125mm) Standard sizes available

3.150 - 12.000"(80 - 315mm)

CoroMill 300Light cutting face & profile milling cuttersVersatile concept for roughing to high feed semi-roughing

MIllIng

The #1 choice for face milling and profiling in Heat Resistant Super Alloys.

A full selection of high density cutters for maximum productivity.

Available in Capto, Arbor mount and Cylindrical shank.

A full complement of grades for wet or dry milling.

For a complete assortment of productscheck out Sandvik’s website




CARBIDE CuttIng


MFG #INsERt

sIZE GRADEDIMENsIONs

ORDER #IC sMediumR300 -0517E-MM 05 GC2040 .197" .067" SAN-17671

-0517E-PM 05 GC1030 .197" .067" SAN-33385-0720E-MM 07 GC1040 .276" .078" SAN-53352-0720E-PM 07 GC1030 .276" .078" SAN-33387-0828E-MM 08 GC1040 .315" .109" SAN-53354-0828E-PM 08 GC1030 .315" .109" SAN-33391-0828M-PM 08 GC1030 .315" .109" SAN-33395-0932E-MM 09 GC2040 .375" .125" SAN-28295-0932M-PM 09 GC1030 .375" .125" SAN-33400-1032E-PM 10 GC1030 .394" .125" SAN-33402-1032M-PM 10 GC1030 .394" .125" SAN-33406-1340E-PM 13 GC1030 .500" .156" SAN-33414-1340M-PM 13 GC1030 .500" .156" SAN-33417-1648E-PM 16 GC1030 .630" .188" SAN-33419-1648M-PM 16 GC4230 .630" .188" SAN-37886

Coarse pitch and Extra Close Pitch available

FACE MILLs WIth ROuND INsERts, NEutRAL DEsIGNToroid Cutter

Inch version

Standard sizes available .375 - .750" (10 - 19mm)

CoroMill 300MIllIng

END MILLs & FACE MILLs WIth ROuND INsERts, pOsItIVE DEsIGNInch version


INsERts

Weldon

* No coolant supply on cutters with diameter larger than 3"Note: Coolant screws are ordered separately

Inserts sold in packages of 10

P MK nS H

Cylindrical

Arbor

Cylindrical


spARE pARts

CuttER

INsERt sIZE

INsERt sCREW ORDER#RA300 05 5513 020-40 SAN-12650

07 20 5513 020-41 SAN-1265108 5513 020-56 SAN-27461

9/105513 020-43 (D3 < 32) SAN-126535513 020-09 (D3>32) SAN-40568

12/13 5513 020-09 SAN-4056816 5513 020-50 SAN-17558

CuttER

INsERt sIZE

kEY (tORX pLus)

tORquE VALuE

ORDER#Nm in/lbsRA300 05 5680 051-01(6IP) 0.6 5 SAN-15067

07 20 5680 046-03(7IP) 0.9 8 SAN-1194308 5680 046-01(8IP) 1.2 10 SAN-08785

9/10 5680 046-02(15IP) 3.0 26 SAN-0878612/13 5680 046-02(15IP) 3.0 26 SAN-08786

16 5680 046-06(20IP) 5.0 44 SAN-15053

MFG #

DIMENsIONs

ORDER #INsERt

sIZE DCDCX / DMM LF Lh LuX ApMX

Cylindrical shank end mills - coarse pitchRA300 -010O13L-05L 05 2 .500" .375" 6.000" 2.000" 1.100" .028" SAN-17359

-013O16L-07L 07 2 .625" .500" 8.000" 2.500" 1.500" .050" SAN-17360-016O19L-08L 08 2 .750" .625" 9.000" 3.000" 2.100" .060" SAN-17361-019O19L-10L 10 2 .750" .750" 9.000" 3.000" 2.900" .078" SAN-17362-025O25L-13L 13 2 1.000" 1.000" 10.000" 3.000" - .250" SAN-43993

Weldon shank end mills - coarse pitchRA300 -010M13-05L 05 2 .500" .375" 3.030" 1.250" .750" .028" SAN-17355

-013M16-07L 07 2 .500" .500" 4.075" 2.000" 1.032" .050" SAN-17356-016M19-08L 08 2 .750" .625" 4.281" 2.250" 1.623" .060" SAN-17357-019M25-10L 10 2 1.000" .750" 4.781" 2.500" 1.496" .078" SAN-17358

MFG #

DIMENsIONs

ORDER #INsERt

sIZE DC DCB DCX LF Lh ApMXArbor mount face millsRA300 -051R19-13M 13 4 1.508" .750" 2.000" - 1.968" .248" SAN-28238

-063R19-13M 13 5 1.980" .750" 2.500" - 1.968" .248" SAN-28244-076R25-13M 13 6 2.492" 1.000" 3.000" - 1.968" .248" SAN-28256-063R19-16M 16 4 1.850" .750" 2.500" - 1.968" .315" SAN-28247-076R25-16M 16 5 2.362" 1.000" 3.000" - 1.968" .315" SAN-28258-102R38-16M* 16 6 3.386" 1.500" 4.000" - 2.480" .315" SAN-28261

Cylindrical shank end millsRA300 -025O25-09M 09 2 .625" 1.000" 1.000" 7.500" 1.500" .177" SAN-28221

-032O32-09M 09 3 .905" 1.250" 1.250" 10.000" 1.400" .177" SAN-28227-032O32-13M 13 2 .750" 1.250" 1.250" 10.000" 1.500" .248" SAN-28229-038O32-13M 13 3 1.000" 1.250" 1.500" 10.000" 1.500" .248" SAN-28235

















































CARBIDE CuttIng

CoroMill 200Multi-purpose side & face milling cutter

MIllIng

VERsAtILItY• Roughingofpocketsbyrampingorhelicalinterpolation• Generalcontouringandprofiling• Facemillingindifferentconditions• CapabilityofmachininginheatresistantmaterialsBuILt-IN pRECIsION• Cutterbodiesaremachinedfromhardenedsteelresultinginclose

tolerances and high strength• Long,evenandpredictableinsertlife• Precisiongroundinsertsforevengreateraccuracy

pRODuCtIVItY• Depthofcutupto.394"• Feedpertoothupto.024"• Availableascoarse,closeandextraclosepitchformaximum

performance in different conditions• Longlastingcutterbodywithprecisionthatresistsheavyloads• Secureinsertgeometriesandgradesoptimizedbyapplication,makehigh

removal rates a realityEAsY-tO-usE• Selflocatinginserts• Orderingandapplicationinformationpermanentlymarkedoncutter

bodies and inserts• Toughcarbideshimforcutterbodyprotection• Recommendedstartvaluesforfeedsandspeedsontheinsertbox

Roughing: CoroMill 200/ CoroMill 300

Finishing: CoroMill Plura/ CoroMill Ball Nose Finishing

Semi-finishing: CoroMill 300/ CoroMill Ball Nose


.002" .024"

09 10 12 13 16 19 20

Pitch:

Condition: Unstable General Stable

L M HGeometries:

General

CARBIDE CuttIng



Arbor

Weldon/ whistle notch

ROuND INsERt FACE MILL & END MILL CuttERsInch version


CoroMill 200MIllIng

spARE pARts INsERts




Cutting data recommendations on the insert box make it easy to program.H

P MK S

Coarse Pitch and Extra Close Pitch available2) Without shim

CuttERINsERt

sIZEINsERt sCREW WIthOut shIM ORDER #

INsERt sCREW WIth shIM ORDER #

RA200 .375" 5513 020-30 SAN-48051 -.500" 5513 020-09 SAN-40568 5513 020-01 SAN-40560.750" 5513 020-08 SAN-40567 5513 020-14 SAN-40573

CuttERINsERt

sIZE shIM ORDER # shIM sCREW ORDER #RA200 .375" - -

.500" 5322 110-06 SAN-79269 5512 090-09 SAN-06582

.750" 5322 110-07 SAN-30101 5512 090-08 SAN-41154

MFG #INsERt


ORDER #D1 sRCKT -13 04 00-MM 1/2" GC1040 .173" .1875" SAN-53224

-13 04 00-PM 1/2" GC4230 .173" .1875" SAN-37772-09 T3 00-PM 3/8" GC4230 .157" .1560" SAN-37768-19 06 00-PH 3/4" GC4230 .256" .2500" SAN-37778

RCHT -130400-PL 1/2" GC1030 .173" .1875" SAN-33328-190600-PL 3/4" GC1030 .256" .2500" SAN-33330

MFG #

DIMENsIONs

ORDER #INsERt

sIZE DCDCB/ DMM DCX LF Lh AZ ApMX

MAX RpM

Arbor mount face millsRA200 -038 R19-13M2 4 .500" 1.500" .750" 2.000" 1.969" - .140" .250" 18,800 SAN-05518

-063 R25-13M 5 .500" 2.500" 1.000" 3.000" 1.969" - .140" .250" 18,000 SAN-76898-089 R38-13M 8 .500" 3.500" 1.500" 4.000" 1.969" - .140" .250" 16,200 SAN-00002-057 R25-19M2 5 .750" 2.250" 1.000" 3.000" 1.969" - .240" .375" 10,600 SAN-08627-083 R38-19M2 6 .750" 3.250" 1.500" 4.000" 2.480" - .240" .375" 9,200 SAN-08628-133 R38-19M2 8 .750" 5.250" 1.500" 6.000" 2.480" - .240" .375" 6,900 SAN-08630

Weldon/whistle notch shank end millsRA200 -016 MN25-09M2 2 .375" .625" 1.000" 1.000" 4.146" 3.000" .110" .187" 37,500 SAN-05533

-019 MN32-13M2 2 .500" .750" 1.250" 1.250" 4.896" 3.750" .150" .250" 31,000 SAN-08624-025 MN32-13M2 3 .500" 1.000" 1.250" 1.500" 5.141" 4.000" .150" .250" 26,300 SAN-08625


























CARBIDE CuttIng

CoroMill 316the exchangeable-head milling system

MIllIng

ø10.375" ø12

.500" ø16.625" ø20

.750" ø251.000"

Diameter range for heads

Flexible system with assortment of heads

Interface

Self-centring screw thread

CORNER RADIus ROuGhING/sEMI-FINIshING END MILLGeneral milling first choice

Inch version, centre cutting


Use with GC1030 insert

Helix angle 50o

Tolerances DC = h9

Applications: Shoulder milling Slot milling Pocket milling Face milling Axial/plunge milling Ramping

ZN = number of cutting edges

CORNER RADIus END MILLGeneral milling

Inch version



FHA 10o

KAPR 90o

Tolerances DC = h10

MFG #

DIMENsIONs

ORDER #COupLING

sIZE DC ZN LF RE ApMXA316 -10SM350-03704P E10 .375" 3 .488" .015" .209" SAN-46256

-10SM350-03708P E10 .375" 3 .488" .031" .209" SAN-46257-10SM350-03715P E10 .375" 3 .488" .062" .209" SAN-46258-12SM350-05004P E12 .500" 3 .575" .015" .276" SAN-46271-12SM350-05008P E12 .500" 3 .575" .031" .276" SAN-46272-12SM350-05015P E12 .500" 3 .575" .062" .276" SAN-46273-16SM350-06204P E16 .625" 3 .736" .015" .335" SAN-46289-16SM350-06208P E16 .625" 3 .736" .031" .335" SAN-46290-16SM450-06208P E16 .625" 4 .736" .031" .335" SAN-46303-16SM450-06215P E16 .625" 4 .736" .062" .335" SAN-46304-20SM450-07508P E20 .750" 4 .839" .031" .413" SAN-46338-20SM450-07515P E20 .750" 4 .839" .062" .413" SAN-46342-20SM450-07532P E20 .750" 4 .839" .125" .413" SAN-46346-20SM450-07563P E20 .750" 4 .839" .250" .413" SAN-46350

MFG #

DIMENsIONs

ORDER #COupLING

sIZE DC ZN ApMX REA316 -10SM210-03704P E10 .375" 2 .315" .015" SAN-55685

-10SM210-03708P E10 .375" 2 .315" .031" SAN-55686-10SM210-03715P E10 .375" 2 .315" .062" SAN-55687-12SM210-05004P E12 .500" 2 .413" .015" SAN-55690-12SM210-05008P E12 .500" 2 .413" .031" SAN-55691-12SM210-05015P E12 .500" 2 .413" .062" SAN-55692-16SM210-06204P E16 .625" 2 .512" .015" SAN-55695-16SM210-06208P E16 .625" 2 .512" .031" SAN-55696-16SM210-06215P E16 .625" 2 .512" .062" SAN-55697
























CARBIDE CuttIng


ROuGhING hIGh FEED END MILLInch version, non-centre cutting



Helix angle 50o

Tolerances DC = h9

Applications: Face milling Ramping

MuLtI EDGE FINIshING END MILLInch version, non-centre cutting



Helix angle 50o

Tolerances DC = h9

Applications:, Shoulder milling, Face milling, Ramping

ROuGhING kORDELL END MILLInch version, centre cutting



Helix angle 40o - 45o

Tolerances DC = h12

Applications: Slot milling, Pocket milling, Ramping

CoroMill 316MIllIng


pROFILING BALL NOsE END MILLInch version, centre cutting



Helix angle 40o

Tolerances DC = h9


CORNER RADIus END MILLInch version, non-centre cutting



Helix angle 0o

Tolerances DC = h10

Applications: Corner rounding

MFG #

DIMENsIONs

ORDER #COupLING

sIZE DC ZN LF RE ApMXA316 -10HM450-03715P E10 .375" 4 .488" .060" .024" SAN-46254

-12HM450-05015P E12 .500" 4 .575" .060" .033" SAN-46270-16HM450-06220P E16 .625" 4 .736" .080" .039" SAN-46288-20HM450-07520P E20 .750" 4 .839" .080" .047" SAN-46318

MFG #

DIMENsIONs

ORDER #COupLING

sIZE DC ZN LF RE ApMXkordell roughing end millA316 -10SM440-03704K E10 .375" 4 .488" .015" .209" SAN-46259

-12SM440-05004K E12 .500" 4 .575" .015" .276" SAN-46274-12SM440-05015K E12 .500" 4 .575" .062" .276" SAN-46275-16SM440-06204K E16 .625" 4 .736" .015" .335" SAN-46300-16SM440-06215K E16 .625" 4 .736" .062" .335" SAN-46301-20SM440-07504K E20 .750" 4 .839" .015" .413" SAN-46334-20SM645-07504K E20 .750" 6 .839" .015" .413" SAN-46354

profiling ball nose end millA316 -10BM440-03750G E10 .375" 4 .488" .188" .209" SAN-46246

-12BM440-05060G E12 .500" 4 .575" .250" .276" SAN-46263-16BM440-06280G E16 .625" 4 .736" .312" .335" SAN-46280-20BM440-075AG E20 .750" 4 .839" .375" .413" SAN-46305

Multi edge finishing end millA316 -10FM650-03704L E10 .375" 6 .488" .015" .209" SAN-46251

-10FM650-03708L E10 .375" 6 .488" .031" .209" SAN-46252-12FM650-05004L E12 .500" 6 .575" .015" .276" SAN-46267-12FM650-05008L E12 .500" 6 .575" .031" .276" SAN-46268-16FM650-06208L E16 .625" 6 .736" .031" .335" SAN-46284-16FM650-06215L E16 .625" 6 .736" .062" .335" SAN-46285-20FM850-07508L E20 .750" 8 .839" .031" .413" SAN-46309-20FM850-07515L E20 .750" 8 .839" .062" .413" SAN-46310-20FM850-07532L E20 .750" 8 .839" .125" .413" SAN-46314-20FMA50-07508L E20 .750" 10 .839" .031" .413" SAN-46306

MFG #

DIMENsIONs

ORDER #COupLING

sIZE DC ZN LF RE ApMXA316 -10UM400-03715G E10 .375" 4 .488" .062" .062" SAN-48437

-10UM400-03732G E10 .375" 4 .488" .125" .125" SAN-48438-12UM400-05032G E12 .500" 4 .575" .125" .125" SAN-48439-12UM400-05040G E12 .500" 4 .575" .156" .156" SAN-48440-16UM400-06247G E16 .625" 4 .736" .188" .188" SAN-48441-20UM400-07563G E20 .750" 4 .839" .250" .250" SAN-52747



SAN-46288






























Carbide Cutting

U-MAX 60o

U-MAX 45o


P M K n S

u-Max

Milling

SpaRE paRtS

INSERtS


CoroMill 316 CyLINDRICaL HOLDER fOR ExCHaNgEabLE HEaD

Need additional information?Check out Sandvik’s website



Inch version, stainless steel or solid carbide shank Tolerances DMM = h6

Key is included

CHamfERINg END mILLSInch design

Standard sizes available .460 - 1.440"

Negative rake

Machine tools: All types

Inclination angle: 0o

Top rake angle: .460" = -12o

1.260" = 0o

Design 1 - SS and Carbide

mfg #INSERt

SIZE gRaDEDImENSIONS

ORDER #IC L S RESPMT -12 04 08-WH 12 GC4030 .500" .173" .188" .032" SAN-79365

-12 04 08-WH 12 GC4040 .500" .173" .188" .032" SAN-04542-12 01 04-WH 12 H13A .500" .173" .188" .032" SAN-73352-12 04 08-WL 12 GC4030 .500" .173" .188" .032" SAN-79366-12 04 08-WL 12 H13A .500" .173" .188" .032" SAN-33723

Design 2 - Carbide Design 3 - SS and Carbide

mfg #

DImENSIONS

ORDER # mfg #

DImENSIONS

ORDER #COUpLINg

SIZE DESIgN Dmm Lf Lb αoCOUpLINg

SIZE DESIgN Dmm Lf Lb αo

Steel CarbideAE10-A12-SS-025 E10 1 .500" 2.500" .250" 90 SAN-46225 AE10-A16-CE-055 E10 3 .625" 5.500" 1.512" 85 SAN-48427AE10-A12-SS-030 E10 1 .500" 3.000" 1.000" 90 SAN-46226 AE10-A16-CE-065 E10 2 .625" 6.500" 2.000" 89 SAN-48428AE12-A12-SS-030 E12 1 .500" 3.000" .250" 90 SAN-46229 AE12-A16-CE-065 E12 3 .625" 6.500" .827" 85 SAN-48429AE12-A12-SS-045 E12 1 .500" 4.500" 1.000" 90 SAN-46230 AE16-A19-CE-065 E16 3 .750" 6.500" .823" 85 SAN-48431AE16-A16-SS-030 E16 1 .625" 3.000" .250" 90 SAN-46233 AE16-A19-CE-075 E16 2 .750" 7.500" 3.000" 89 SAN-48432AE16-A16-SS-045 E16 1 .625" 4.500" 1.000" 90 SAN-46234 AE20-A25-CE-060 E20 3 1.000" 6.000" 1.575" 85 SAN-48433AE16-A19-CS-065 E16 3 .750" 6.500" .823" 85 SAN-46235 AE20-A32-CE-070 E20 3 1.250" 7.000" 3.000" 85 SAN-48435AE20-A19-SS-030 E20 1 .750" 3.000" .250" 90 SAN-46237

AE20-A19-SS-045 E20 1 .750" 4.500" 1.000" 90 SAN-46239

AE20-A25-CS-060 E20 3 1.000" 6.000" 1.575" 85 SAN-46240

AE20-A32-CS-070 E20 3 1.250" 7.000" 3.000" 85 SAN-46243

mfg #

DImENSIONS

ORDER #DC D1 D3 l1 l2 l3 Dmm apmx max

RpmINSERt

SIZE

Weldon shank end mills - coarse pitchRA215.64 -12M19-6012 1 .470" .724" .122" 3.504" 4.528" 1.083" .750" .394" 25,200 1/2" SAN-50145

-12M19-4512 1 .500" .724" .150" 3.504" 4.528" 1.083" .750" .319" 20,845 1/2" SAN-50146-32M32-4512 3 1.280" 1.200" .930" 4.140" 5.276" 1.083" 1.250" .319" 9,385 1/2" SAN-50144-36M32-6012 3 1.440" 1.070" 1.090" 4.140" 5.276" 1.083" 1.250" .394" 8,855 1/2" SAN-50143

CUttER DC INSERt SCREW ORDER #RA215.64 .460 - 1.440" (12

- 36mm)5513 020-29 SAN-50952




























CARBIDE CuttIng


CARBIDE InSERt gRADESstEELGC4230All-round grade for modern machining with a good balance of security and productivity. Coated carbide grade for light to heavy milling (both wet and dry) in unalloyed and low alloyed steels. First choice in face milling and an optimizer for higher productivity in shoulder milling.GC4220Coated carbide grade optimized for best productivity in steel milling. Grade for dry machining with high chip removal rate.GC4240Coated carbide grade for toughness demanding operation in steel milling. For end mill and square shoulder concepts grade GC4240 should be used in more stable conditions like short overhang , face milling, shallow shoulder milling etc. For other concepts grade GC4240 is the first or backup choice in toughness operation. Benefits of security. Suitable for small batch production of mixed material. Works well both with or without coolant.GC1030PVD-coated carbide grade. GC1030 is the first choice in unstable conditions like long edge, chip jamming, deep shoulder and end milling, long overhang, Turnmill operations etc. Can be used as a backup choice in toughness operation. In combination with perifery ground inserts first choice for sticky materials i.e. low carbon steel.Ct530Cermet grade for light milling operations mainly without coolant. The high resistance to plastic deformation and smearing/built-up edges makes it suitable for a wide cutting speed range. Ideal grade for Wiper inserts.

stAINLEss stEELGC2040MT-CVD coated carbide grade. 1st choice for face milling in all stainless steels. Used at low to high cutting speeds under toughness demanding conditions.GC1040A tough PVD-coated carbide grade, for milling under difficult conditions with low to intermediate cutting speed and/or feed. For application where demands on edge line security and edge sharpness is high. Primarily for sticky austenitic and duplex stainless steels, 1st choice is dry but also wet.

MIllIng

CAst IRONGC3040Coated carbide grade for toughness demanding milling of cast iron e.g. nodularcastiron,wetconditionsorhightensileiron.Longpredictabletoollife at low to medium cutting speeds.GC3220CVD-coated carbide grade for medium to rough milling of grey cast iron mainlyunderdryconditions.Longpredictabletoollifeatmediumtohighcutting speeds.GC1020PVD-coated carbide grade for medium to rough milling of grey and nodular cast iron under wet conditions. To be used at medium to high speeds with predictable tool life.CB50CB50 is a cubic boron nitride tipped grade. It gives a high edge toughness combined with good wear resistance. CB50 is well suited for machining of cast iron under favourable conditions.k20WCoated carbide grade for medium to rough milling of grey cast iron under wet conditions. To be used at low to medium speeds.CC6190Silicon nitride ceramic grade for light roughing to semi-finishing of grey cast iron at high cutting speeds.

hEAt REsIstANt ALLOYsh10F (hW) – S25 (S20 – S30)Uncoated carbide grade with fine grain sizes. High notch wear resistance makes it suitable for milling of aerospace materials e.g. titanium.GC2030 (hC) – S20 (S15 – S25)PVD-coated carbide grade for semi-finishing to light roughing of heat resistant superalloys.GC1030 (hC) – S15 (S10 – S20)PVD-coated carbide grade for milling of heat resistant super alloys at medium speeds. Good resistance to built-up edges and plastic deformation.GC2040 (hC) – S30 (S25 – S40)MT-CVD-coated carbide grade for milling of cast heat resistant alloys and toughness demanding titanium milling. In titanium milling prefer GC2040 when toughness demand is high combined with long contact times (high heat generation) as when large DC and/or large ae.s30t (hC) – S25 (S15 – S30)First choice grade for titanium milling. PVD TiAlN coated micro-grain cemented carbide that combines high edge strength and bulk toughness. It has good resistance to micro-chipping and keeps the cutting edge line intact longer. The grade focuses on high performance at elevated cutting speeds.s40t (hC) – S35 (S25 – S45)MT-CVD-coated carbide grade for milling of titanium. First choice grade during moderate to severe vibrations and in toughness demanding operations. It has high bulk toughness and high edge strength thanks to its fine grained carbide structure and high binder content. Wear grows slowly, making cutting edge duller without breaking.GC1010 (hC) – S10 (S05 – S10)PVD-coated carbide grade for milling of titanium during very good conditions. An optimizer with excellent wear resistance at elevated cutting speeds. Sensitive to instability and vibrations.

hARDENED stEELCB50 (BN) – h05 (h01 – h10)CB50 is a cubic boron nitride tipped grade. It gives a high edge toughness combined with good wear resistance. CB50 is well suited for machining of hardened steel under favourable conditions.CC6190 (hC) – h10 (h05 – h15)Silicon nitride ceramic grade suitable for semi-finish milling of chilled cast iron at medium to high speed.GC1010 (hC) – h10 (h05-h15)PVD-coated carbide grade for machining in hardened steel. Can handle large portion of machining demands from roughing to finishing operations. Due to exceptional plastic deformation resistance, thermal crack resistance and good wear resistance, the grade can withstand long time in cut. Suitable for machining of hardened steel from 36HRC and above.GC1030 (hC) - h10 (h10-h20)PVD-coated carbide grade for milling of hardened components at low feeds and moderate speeds.GC4220 (hC) – h25 (h15 – h30)Coated carbide grade for light roughing operations.


CARBIDE CuttIng

CoroDrill 870Exchangeable tip drillsecure and high productive drilling

DRIllIng

CoroDrill 870 offers the high versatility of an exchangeable-tip drill with secure interface between drill body and tip for excellent holemaking performance.This design with optimized grade and geometry for steel ensures hole quality for the intermediate hole tolerance area of IT9-IT10.FEAtuREs• Secure,highprecisioninterfacebetweendrillbodyandtipforextrastability• Tipchangingpossiblewhiletoolisinthemachinetoreducedowntime• Drillfluteswithoptimizedshape,sizeandhelixangleprovidesafechipevacuationandoveralltool

stability• Rigiddrillbodyforhighpenetrationratesandexcellentholequality• Internalcoolantforalldrills• TorquevaluesandkeycodesmarkedonbodyAppLICAtION• Drilldiameterrange.472-.826"(12-20.99mm)• Drilllengths3and5xdrilldiameter• Typicalholetypes:pre-holesfortaps,boltholes

DRILL tIps

Call for full range of insert tips available

hANDLING INstRuCtIONsGently press the tip down and towards the support surface while tightening the screw to the recommended torque shown on the drill body. MFG#

tIp INtER-FACE sIZE DC MIN ORDER #

870 -1200-10-PM 10 .476" SAN-65903-1240-10-PM 10 .488" SAN-65911-1250-11-PM 11 .492" SAN-65912-1260-11-PM 11 .496" SAN-65917-1270-11-PM 11 .500" SAN-65918-1300-12-PM 12 .512" SAN-65921-1340-12-PM 12 .528" SAN-65929-1350-13-PM 13 .532" SAN-65930-1390-13-PM 13 .547" SAN-65938-1430-14-PM 14 .563" SAN-65948-1490-14-PM 14 .587" SAN-65956-1500-15-PM 15 .591" SAN-65957-1550-15-PM 15 .610" SAN-65967-1590-15-PM 15 .626" SAN-65973-1600-16-PM 16 .630" SAN-65974-1650-16-PM 16 .650" SAN-65984-1690-16-PM 16 .665" SAN-65989-1700-17-PM 17 .669" SAN-65991-1746-17-PM 17 .687" SAN-66005-1750-17-PM 17 .689" SAN-66006-1790-17-PM 17 .705" SAN-66010-1800-18-PM 18 .709" SAN-66011-1840-18-PM 18 .724" SAN-66019-1860-18-PM 18 .720" SAN-66021-1890-18-PM 18 .744" SAN-66024-1900-19-PM 19 .748" SAN-66026-1930-19-PM 19 .760" SAN-66037-1990-19-PM 19 .784" SAN-66047-2000-20-PM 20 .787" SAN-66048-2030-20-PM 20 .799" SAN-66056-2090-20-PM 20 .823" SAN-66063
































CARBIDE CuttIng


CoroDrill 870DRIllIng

DRILL BODIEsInch version, cylindrical shank

Standard sizes available .472 - .826" (12 - 20.99mm)

Flat according to ISO 9766

LPR=programminglength

DRILLs: 3xDC

DRILLs: 5xDC




MFG#tIp INtER-FACE sIZE

DRILL tIp DIA DIMENsIONs

ORDER #DC MIN

DC MAX DMM LpR OAL LB Lu

870 -1200-10LX063-3 10 .4724" .4917" .625" 2.165" 4.055" 1.654" 1.476" SAN-65904-1250-11LX063-3 11 .4921" .5114" .625" 2.205" 4.094" 1.693" 1.535" SAN-65913-1300-12LX063-3 12 .5518" .5311" .625" 2.284" 4.173" 1.772" 1.594" SAN-65922-1350-13LX063-3 13 .5315" .5508" .750" 2.362" 4.252" 1.850" 1.654" SAN-65931-1400-14LX075-3 14 .5512" .5902" .750" 2.598" 4.567" 1.968" 1.772" SAN-65940-1500-15LX075-3 15 .5905" .6295" .750" 2.716" 4.685" 2.087" 1.890" SAN-65958-1600-16LX075-3 16 .6299" .6689" .750" 2.835" 4.803" 2.205" 2.008" SAN-65975-1700-17LX075-3 17 .6693" .7083" .750" 2.992" 4.961" 2.323" 2.126" SAN-65992-1800-18LX075-3 18 .7087" .7476" .750" 3.110" 5.079" 2.441" 2.244" SAN-66012-1900-19LX1-3 19 .7480" .7870" 1.000" 3.386" 5.591" 2.598" 2.362" SAN-66027-2000-20LX1-3 20 .7874" .8264" 1.000" 5.543" 5.748" 2.716" 2.480" SAN-66049

MFG#tIp INtER-FACE sIZE

DRILL tIp DIA DIMENsIONs

ORDER #DC MIN

DC MAX DMM LpR OAL LB Lu

870 -1200-10LX063-5 10 .4724" .4917" .625" 3.110" 5.000" 2.598" 2.461" SAN-65905-1250-11LX063-5 11 .4921" .5114" .625" 3.228" 5.118" 2.716" 2.559" SAN-65914-1300-12LX063-5 12 .5518" .5311" .625" 3.346" 5.236" 2.835" 2.658" SAN-65923-1350-13LX063-5 13 .5315" .5508" .750" 3.425" 5.315" 2.913" 2.756" SAN-65932-1400-14LX075-5 14 .5512" .5902" .750" 3.780" 5.748" 3.150" 2.953" SAN-65941-1500-15LX075-5 15 .5905" .6295" .750" 3.976" 5.945" 3.346" 3.150" SAN-65959-1600-16LX075-5 16 .6299" .6689" .750" 4.173" 6.142" 3.543" 3.346" SAN-65976-1700-17LX075-5 17 .6693" .7083" .750" 4.409" 6.378" 3.740" 3.543" SAN-65997-1800-18LX075-5 18 .7087" .7476" .750" 4.606" 6.535" 3.937" 3.740" SAN-66013-1900-19LX1-5 19 .7480" .7870" 1.000" 4.961" 7.165" 4.173" 3.937" SAN-66028-2000-20LX1-5 20 .7874" .8264" 1.000" 5.197" 7.402" 4.370" 4.134" SAN-66050
























Carbide Cutting

The CoroDrill 880 features the new Sandvik Coromant innovation,

Step TechnologyCloser hole tolerances. Advanced insert positioning. Wiper technology. Excellent surface finish.

Size 01Two cutting edges

DRILLs

Also Available in 5xDC

Cylindrical shankFlat according to ISO 9766Inch design

Step-by-step entrance into the workpiece. Perfectly balanced cutting forces. Up to 100% productivity increase.

Specially optimized grades and geometries. High performance in all workpiece materials.

Size 02-09Four cutting edges

Corodrill 880Indexable insert drillAdding a new dimension to success

drilling

.472 - 2.500" dia

MFG #DRILL

DIAINsERT

sIZEDIMENsIONs

ORDER #DMM LF OAL LU

2xDC

A880 -D0500LX19-02 .500" 01 .750" 1.582" 3.550" 1.000" SAN-38932-D0625LX19-02 .625" 02 .750" 1.932" 3.900" 1.250" SAN-33025-D0750LX25-02 .750" 03 1.000" 2.267" 4.472" 1.500" SAN-31314-D0875LX25-02 .875" 04 1.000" 2.636" 4.841" 1.750" SAN-28046-D1000LX25-02 1.000" 05 1.000" 2.962" 5.167" 2.000" SAN-28050-D1250LX38-02 1.250" 06 1.500" 3.582" 6.338" 2.500" SAN-34652-D1500LX38-02 1.500" 07 1.500" 4.232" 6.988" 3.000" SAN-34678-D2000LX38-02 2.000" 08 1.500" 5.582" 8.338" 4.000" SAN-37120-D2500LX38-02 2.500" 09 1.500" 6.932" 9.688" 5.000" SAN-38961

3xDC

A880 -D0500LX19-03 .500" 01 .750" 2.082" 4.051" 1.500" SAN-38936-D0625LX19-03 .625" 02 .750" 2.565" 4.534" 1.875" SAN-33026-D0750LX25-03 .750" 03 1.000" 3.304" 5.239" 2.250" SAN-31315-D0875LX25-03 .875" 04 1.000" 3.463" 5.668" 2.625" SAN-28047-D1000LX25-03 1.000" 05 1.000" 3.932" 6.137" 3.000" SAN-28051-D1250LX38-03 1.250" 06 1.500" 4.832" 7.588" 3.750" SAN-34654-D1500LX38-03 1.500" 07 1.500" 5.732" 8.488" 4.500" SAN-34679-D2000LX38-03 2.000" 08 1.500" 7.582" 10.338" 6.000" SAN-37121-D2500LX38-03 2.500" 09 1.500" 9.432" 12.188" 7.500" SAN-38962

4xDC

A880 -D0750LX25-04 .750" 03 1.000" 3.781" 5.986" 3.000" SAN-31316-D0875LX25-04 .875" 04 1.000" 4.329" 6.534" 3.500" SAN-29463-D1000LX25-04 1.000" 05 1.000" 4.915" 7.120" 4.000" SAN-29496-D1125LX31-04 1.125" 05 1.250" 5.502" 7.864" 4.500" SAN-29498-D1250LX38-04 1.250" 06 1.500" 6.082" 8.838" 5.000" SAN-34655-D1375LX38-04 1.375" 06 1.500" 6.672" 9.428" 5.500" SAN-34668-D1500LX38-04 1.500" 07 1.500" 7.232" 9.988" 6.000" SAN-34680-D1625LX38-04 1.625" 07 1.500" 7.819" 10.575" 6.500" SAN-34692-D1750LX38-04 1.750" 08 1.500" 8.407" 11.163" 7.000" SAN-37112-D2000LX38-04 2.000" 08 1.500" 9.582" 12.338" 8.000" SAN-37122-D2250LX38-04 2.250" 09 1.500" 10.757" 13.513" 9.000" SAN-38953




















SAN-29463










CARBIDE CuttIng


CoroDrill 880DRIllIng

P M K n S HINsERts

Central insertSize 01

Central insertSizes 02 to 09

Peripheral insertSizes 02 to 09




INsERt GEOMEtRIEsDC .472 - .550" (12 - 13.99mm)

P M n S P M K n S H

-GR

• Lowtomediumfeed

• Lightcutting

• Excellentchipcontrol in long chipping materials

• LMfirstchoice for long chipping materials

• MSsharpeedge geometry optimized for stainless steel

-LM

DC .550 - 2.500" (14 - 63mm)-LM

P M n S M S

-MS

ChARACtERIstICs

-GR

P K

-GT-GM

P M K n S H P M K n S H

• Lowtomediumfeed

• Lightcutting

• Excellentchipcontrol in feed area

• Lowdeflection

• Lowtohighfeed

• Strongreinforced edge

• Goodchipcontrol in high feeds

• Lowtohighfeed

• Verystrongreinforced edge

• Goodchipcontrol in most materials

• Firstchoicefor unstable conditions and interrupted cuts

Peripheral insertSize 01

FEED DEsCRIptIONINsERt


ORDER #IC s RE D1

MED

IUM

Central insert880-010203H-C-LM 01 GC1044 .189" .087" .012" .087" SAN-41246880-02 02 04H-C-GM 02 GC1044 .193" .094" .016" .087" SAN-33996880-020204H-C-LM 02 GC1044 .193" .094" .016" .087" SAN-33998880-030305H-C-LM 03 GC1044 .224" .102" .020" .098" SAN-31211880-040305H-C-LM 04 GC1044 .268" .110" .020" .110" SAN-28607880-050305H-C-LM 05 GC1044 .331" .118" .020" .126" SAN-28617880-06 04 06H-C-GM 06 GC1044 .402" .138" .024" .157" SAN-35985880-060406H-C-LM 06 GC1044 .402" .138" .024" .157" SAN-25994880-07 04 06H-C-GM 07 GC1044 .486" .157" .024" .157" SAN-36088880-08 05 08H-C-GM 08 GC1044 .585" .177" .031" .185" SAN-38585880-09 06 08H-C-GM 09 GC1044 .705" .217" .031" .185" SAN-41262

periferal insert880-0102W04H-P-LM 01 GC4044 .189" .087" .016" .087" SAN-41244880-02 02 W04H-P-GM 02 GC4044 .201" .094" .016" .087" SAN-33992880-03 03 W05H-P-GM 03 GC4044 .236" .102" .020" .098" SAN-31214880-04 03 W05H-P-GM 04 GC4024 .291" .110" .020" .110" SAN-28599880-05 03 W05H-P-GM 05 GC4024 .350" .118" .020" .126" SAN-28609880-06 04 W06H-P-GM 06 GC4024 .419" .138" .024" .157" SAN-35932880-07 04 W06H-P-GM 07 GC4024 .498" .157" .024" .157" SAN-36031880-08 05 W08H-P-GM 08 GC4024 .608" .177" .031" .185" SAN-38577880-09 06 W08H-P-GM 09 GC4024 .732" .217" .031" .185" SAN-41254

HIGH

Central insert880-01 02 03H-C-GR 01 GC1044 .189" .087" .012" .087" SAN-41245880-02 02 04H-C-GR 02 GC1044 .193" .094" .016" .087" SAN-33997880-03 03 05H-C-GR 03 GC1044 .224" .102" .020" .098" SAN-31210880-04 03 05H-C-GR 04 GC1044 .268" .110" .020" .098" SAN-28606880-05 03 05H-C-GR 05 GC1044 .331" .118" .020" .126" SAN-28616880-06 04 06H-C-GR 06 GC1044 .402" .138" .024" .157" SAN-35986880-07 04 06H-C-GR 07 GC1044 .486" .157" .024" .157" SAN-36090880-08 05 08H-C-GR 08 GC1044 .585" .177" .031" .185" SAN-38586880-09 06 08H-C-GR 09 GC1044 .705" .217" .031" .185" SAN-41263

periferal insert880-01 02 W04H-P-GR 01 GC4044 .189" .087" .016" .087" SAN-41241880-02 02 W05H-P-GR 02 GC4044 .201" .094" .020" .087" SAN-33993880-03 03 W06H-P-GR 03 GC4044 .236" .102" .024" .098" SAN-31216880-04 03 W07H-P-GR 04 GC4024 .291" .110" .028" .110" SAN-28601880-05 03 W08H-P-GR 05 GC4024 .350" .118" .031" .126" SAN-28611880-06 04 W10H-P-GR 06 GC4024 .419" .138" .039" .157" SAN-36155880-07 04 W12H-P-GR 07 GC4024 .498" .157" .047" .157" SAN-36082880-08 05 W12H-P-GR 08 GC4024 .608" .177" .047" .185" SAN-38583880-09 06 W12H-P-GR 09 GC4024 .732" .217" .047" .185" SAN-41260








































CARBIDE CuttIng

CoroDrill 860the fastest drill for steelYour lower-hole-cost alternative

SolID CARBIDE DRIllIng

Unique new cutting edge lowers cutting forces and improves chip control.

The fastest drill for steel

CoroDrill 860 is a new revolution in holemaking performance.FEAtuREs• Uniquenewcuttingedgeshapelowerscuttingforcesandimproveschip

control• Fluteshapeoptimizeschipformtoimprovechipflowandevacuation• Toughnewcarbideextendstoollife• Edgepreparationcontrolswearandprovidesgreaterreliability• ReinforceddrillcorneraddsstrengthandprocesssecurityAppLICAtION• Long-andshort-chippingmaterialssuchasunalloyedsteels,lowcarbon

steels, low alloy steels, high alloy steels, steel casings• Drilldiameterrange.118-.787"(3-20mm)• Drilllengths3to8xdrilldiameter• AchievableholetoleranceIT8-IT9• Useinconventionaldrilling,crossholes,inclinedsurfaces,stackdrilling,

convey or concave surfaces

Need additional information?Check out Sandvik’s website


For pricing call our Customer Service Team

at 1-866-999-3117.

CARBIDE CuttIng


MFG # thREAD sIZEDIMENsIONs

ORDER #DC DMM OAL Lu860.2 -0510-016A1-PM M6 & 1/4-20 UNC .2008" 8mm 3.110" .630" SAN-56592

-0660-020A1-PM 5/16-18 UNC .2598" 10mm 3.504" .787" SAN-65467-0800-024A1-PM 3/8-16 UNC .3150" 12mm 4.016" .945" SAN-65474-0870-026A1-PM M10 65% .3425" 12mm 4.016" 1.024" SAN-56594-1040-031A1-PM M12 65% .4134" 14mm 4.409" 1.220" SAN-65481-1050-032A1-PM MF12x1.5 .4134" 14mm 4.409" 1.260" SAN-65482-1150-035A1-PM 1/2-20 UNF .4528" 16mm 4.882" 1.378" SAN-65486-1200-036A1-PM M142.0 .4724" 16mm 4.882" 1.417" SAN-65487-1350-041A1-PM 5/8-11 UNC .5315" 18mm 5.158" 1.614" SAN-65498-1400-042A1-PM M16x2.0 .5512" 20mm 5.591" 1.654" SAN-65499

SolID CARBIDE DRIllIngCoroDrill 860DRILL BODIEs WIth INtERNAL COOLANt suppLYInch version, cylindrical shank



Tolerance DMM = h6

Tolerance DC = m7

2-3xDC

4-5xDC

DC α .1575" 139o

.3150" 143o

.6299" 144o

3xDC ChAMFER DRILL FOR tAp-sIZE hOLEsInch version, cylindrical shank

Standard sizes available .132 - .689" (3.35 - 17.50mm)


Tolerance DMM = h6

Tolerance DC = m7

MFG #thREAD

sIZEDIMENsIONs

ORDER #DC DMM OAL Lu860.1 -0317-021A1-PM .1248" 6mm 2.598" .827" SAN-64828

-0390-027A1-PM 10-24 UNC .1535" 6mm 2.913" 1.063" SAN-64870-0460-027A1-PM .1811" 6mm 2.913" 1.063" SAN-64906-0510-037A1-PM M6 65% .2008" 6mm 3.425" 1.457" SAN-56610-0635-040A1-PM .2500" 8mm 3.583" 1.575" SAN-56614-0670-040A1-PM 5/16-18 UNC .2638" 8mm 3.583" 1.575" SAN-56617-0690-040A1-PM M8 65% .2717" 8mm 3.583" 1.575" SAN-56620-0800-040A1-PM .3150" 8mm 3.583" 1.575" SAN-56624-0870-045A1-PM M10 65% .3425" 10mm 4.055" 1.772" SAN-56630-0952-045A1-PM .3748" 10mm 4.055" 1.772" SAN-65152-1032-053A1-PM M12 .4063" 12mm 4.646" 2.087" SAN-65190-1100-053A1-PM 1/2-13 UNC .4331" 12mm 4.646" 2.087" SAN-65226-1111-053A1-PM .4374" 12mm 4.646" 2.087" SAN-65234-1270-057A1-PM .5000" 14mm 4.882" 2.244" SAN-65326-1350-057A1-PM 5/8-11 UNC .5315" 14mm 4.882" 2.244" SAN-56649-1587-062A1-PM .6248" 16mm 5.236" 2.441" SAN-65402-1905-077A1-PM .7500" 20mm 6.024" 3.032" SAN-65452

MFG #thREAD

sIZEDIMENsIONs

ORDER #DC DMM OAL Lu860.1 -0300-016A1-PM .1181" 6mm 2.441" .630" SAN-56567

-0400-018A1-PM .1575" 6mm .2598" .709" SAN-56571-0635-024A1-PM .2500" 8mm .3310" .945" SAN-56573-0670-024A1-PM 5/16-18 UNC .2638" 8mm .3110" .945" SAN-65017-0794-028A1-PM .3126" 8mm 3.110" 1.102" SAN-65083-0860-031A1-PM M10 70% .3386" 10mm 3.504" 1.220" SAN-56580-1000-031A1-PM 7/16-20 UNF .3937" 10mm 3.504" 1.225" SAN-56584-1030-037A1-PM M12 75% .4055" 12mm 4.016" 1.457" SAN-65186-1100-037A1-PM 1/2-13 UNC .4330" 12mm 4.022" 1.456" SAN-56587-1110-037A1-PM .4370" 12mm 4.016" 1.457" SAN-65229-1160-037A1-PM 1/2-20 UNF .4567" 12mm 4.016" 1.457" SAN-65260-1350-040A1-PM 5/8-11 UNC .5315" 14mm 4.213" 1.575" SAN-65347-1587-044A1-PM .6248" 16mm 4.528" 1.732" SAN-65398-2000-055A1-PM .7874" 20mm 5.158" 2.165" SAN-65455











































CARBIDE CuttIng

12xDC WIth INtERNAL COOLANt suppLYCylindrical shankStandard sizes available .118 - .551" (3 - 14mm)Use with GC34 insertTolerance DMM = h6Tolerance DC = m7

CoroDrill 861Deep hole drillinghole depths to 30 x drill diameter


Patented geometry for greater stability.

Special point geometry reduces cutting forces.

Highly accurate deep holes.

CoroDrill 861 provides the high stability essential for drilling deep holes with high speed and efficiency.FEAtuREs• ACM(AdvancedChipManagement)

flute geometry encourages small and manageable chips

• Speciallydesignedpointgeometryhelpstoreduce thrust forces

• Consistentedgepreparationprotectsthecutting edge from premature chipping and flaking

• Doubleoffsetmarginpatentedgeometryoffers greater stability to the drilling operation

• Internalcoolantholesdelivercoolantdirectly to the tip of the drill even at deep drilling depths

AppLICAtION• Clampwithhighprecisionchucksonly• Drilllengths12to30xdrilldiameter• Awiderangeofworkpiecematerials• Useinconventionaldrilling,crossholes,

angled faces

3xDC WIth INtERNAL COOLANt suppLYPilotStandard sizes available .118 - .472" (3 - 12mm)Use with GC34 insertTolerance DMM = h6Tolerance DC = p7

15xDC WIth INtERNAL COOLANt suppLY*Cylindrical shankStandard sizes available .118 - .472" (3 - 12mm)Use with GC34 insertTolerance DMM = h6Tolerance DC = m7

*CoroDrill 861 pilot drill to be applied before drilling with CoroDrill 861 longer than 12xDC



For full product details check out Sandvik’s website www.sandvik.coromant.com.


CARBIDE CuttIng


CoroDrill 862solid carbide micro drillshole depths to 12 x drill diameter


Optimized flute geometry for small, manageable chips.

Special point geometry reduces thrust forces.

Highly stable cutting edges.

New micro-geometry drills offer outstanding performance for holes up to .116" (2.95mm) diameter. A thin, effective coating helps retain cutting edge geometry and provide a smooth surface for chip evacuation, while even wear formation prolongs tool life for a wide range of materials.FEAtuREs• ACM(AdvancedChipManagement)flutegeometryforsmalland

manageable chips• Speciallydesignedpointgeometryreducesthrustforces• Smoothdrillsurfaceenablesfastandefficientchipevacuation• Internalcoolantholesdelivercoolantdirectlytothetipofthedrill

even at deep drilling depths• .118"(3mm)shankdiameterthroughouttherangeAppLICAtION• Suitableforallmaterials• Drilldiameterrange.073-.116"(1.85-2.95mm)• Drilllengths8to12xdrilldiameter• UsewithHydroGriphighprecisionchucksonly

8xDC WIth INtERNAL COOLANt suppLYCylindrical shank



Tolerance DMM = h6

Tolerance DC = p7

12xDC WIth INtERNAL COOLANt suppLYCylindrical shank



Tolerance DMM = h6

Tolerance DC = p7

MFG #DIMENsIONs

ORDER #DC DMM OAL Lu862.1 -0185-022A1-GM .0728" 3mm 2.835" .866" SAN-65796

-0200-024A1-GM .0787" 3mm 2.835" .945" SAN-65808-0205-025A1-GM .0807" 3mm 2.835" .984" SAN-65810-0208-025A1-GM .0819" 3mm 2.835" .984" SAN-65812-0238-029A1-GM .0937" 3mm 2.835" 1.142" SAN-65829-0240-029A1-GM .0945" 3mm 2.835" 1.142" SAN-65831-0244-029A1-GM .0961" 3mm 2.835" 1.142" SAN-65833-0290-035A1-GM .1142" 3mm 3.150" 1.378" SAN-65853-0295-035A1-GM .1161" 3mm 3.150" 1.378" SAN-65855

MFG #DIMENsIONs

ORDER #DC DMM OAL Lu862.1 -0185-015A1-GM .0728" 3mm 2.835" .591" SAN-65795

-0200-016A1-GM .0787" 3mm 2.835" .630" SAN-65807-0205-016A1-GM .0807" 3mm 2.835" .630" SAN-65809-0208-017A1-GM .0819" 3mm 2.835" .669" SAN-65811-0238-019A1-GM .0937" 3mm 2.835" .748" SAN-65828-0240-019A1-GM .0945" 3mm 2.835" .748" SAN-65830-0244-020A1-GM .0961" 3mm 2.835" .787" SAN-65832-0290-023A1-GM .1142" 3mm 3.150" .906" SAN-65852-0295-024A1-GM .1161" 3mm 3.150" .945" SAN-65854




















CARBIDE CuttIngSolID CARBIDE DRIllIng

CoroDrill 460Versatile high performance drill

2-3xDC

4-5xDC

VERsAtILE & FLEXIBLE, REDuCING tOOLING COstsHA shank, with internal coolant supply

Standard sizes available .118 - .787"

Drill lengths 2 to 5 x drill diameter


DrillstandardDIN6537L

FEAtuREs• Formultiplematerialsandmultipleapplications• Outstandingcoatingandflutedesignleadingtosmoothandefficientchipevacuation• Exceptionalvaluewithnocompromiseonquality• Canberegroundupto3times,extendingtoollifefutherAppLICAtION• Forawiderangeofmaterials

MFG #DIMENsIONs

ORDER #DC DMM OAL Lu LCF460.1 -0300-015A1-XM .118" .236" 2.598" .590" 1.102" SAN-70286

-0318-016A1-XM .125" .236" 2.598" .629" 1.102" SAN-70294-0400-020A1-XM .157" .236" 2.913" .787" 1.417" SAN-70344-0600-030A1-XM .236" .236" 3.228" 1.181" 1.732" SAN-70444-0635-032A1-XM .250" .314" 3.582" 1.259" 2.086" SAN-70476-0700-035A1-XM .276" .314" 3.582" 1.377" 2.086" SAN-70541-0850-043A1-XM .335" .393" 4.055" 1.692" 2.401" SAN-70629-0950-048A1-XM .374" .393" 4.055" 1.889" 2.401" SAN-70675-0953-048A1-XM .375" .393" 4.055" 1.889" 2.401" SAN-70679-1000-050A1-XM .394" .393" 4.055" 1.968" 2.401" SAN-70707-1111-056A1-XM .437" .472" 4.645" 2.204" 2.755" SAN-70769-1270-064A1-XM .500" .551" 4.881" 2.519" 2.992" SAN-70838-1400-063A1-XM .551" .551" 4.881" 2.480" 2.992" SAN-70873

MFG #DIMENsIONs

ORDER #DC DMM OAL Lu LCF460.1 -0318-010A1-XM .125" .236" 2.440" .393" .787" SAN-70292

-0400-012A1-XM .157" .236" 2.598" .472" .944" SAN-70342-0476-014A1-XM .187" .236" 2.598" .551" 1.102" SAN-70382-0635-019A1-XM .250" .314" 3.110" .748" 1.338" SAN-70474-0800-024A1-XM .315" .314" 3.110" .944" 1.614" SAN-70603-0850-026A1-XM .335" .393" 3.503" 10.23" 1.850" SAN-70627-0900-027A1-XM .354" .393" 3.503" 1.062" 1.850" SAN-70653-1000-030A1-XM .394" .393" 3.503" 1.181" 1.850" SAN-70705-1111-033A1-XM .437" .472" 4.015" 1.299" 2.165" SAN-70767-1200-036A1-XM .472" .472" 4.015" 1.417" 2.165" SAN-70815-1270-038A1-XM .500" .551" 4.212" 1.496" 2.362" SAN-70836

























Carbide Cutting


Corodrill delta-C r840FOR hIgh PRODuctIvIty hOLEmakINgDelta-C – the first choice in modern high performance machines.• Self-centringdrill• Noneedforpre-drilling• Goodsurfacefinish• Easytoregrindgeometry• DrilldesignaccordingtoDIN6537

Solid Carbide drilling

• ToleranceM7tosuittappingoperations• Inch/metricdimension• Availableinsizes.0118to.787"(.3to20mm)

CylindricalshankShortdesignDrilldiameter: .118"-.787"Maxholedepth: 2-3xDCCoating: TiN/TiALNMultilayerHoletolerance: 0"/.0015"Surfacefinish: Ra40-75µ"Cuttingfluid: EmulsionorcuttingoilDrillstandard: DIN6537UsewithCoromantGrade1220

Alsoavailableintapdrillsizes,inchandmetricthreads

hyDROgRIP chuckSPrecisiondrillsclampedinprecisionchucks.Forhighestclampingforceandminimumrunout.

hyDROgRIP PENcIL tyPE chuckSPrecisiondrillsclampedinprecisionchucks.Forimprovedaccessibility.

ForacompleteassortmentofproductscheckoutSandvik’swebsite


ForpricingcallourCustomerServiceTeamat 1-866-999-3117.

mFg #

DRILL DIa Dc DImENSIONS

ORDER #mm INch FRactION Dmm OaL Lu LcFR840 -0516-30-A1A 5.16 .203 13/64" .236" 2.598" .709" 1.102" SAN-20589

-0556-30-A1A 5.56 .219 7/32" .236" 2.598" .748" 1.102" SAN-20598-0595-30-A1A 5.95 .234 15/64" .236" 2.598" .748" 1.102" SAN-20607-0635-30-A1A 6.35 .250 1/4" .315" 3.110" .866" 1.339" SAN-20616-0675-30-A1A 6.75 .266 17/64" .315" 3.110" .866" 1.339" SAN-20626-0714-30-A1A 7.14 .281 9/32" .315" 3.110" 1.102" 1.614" SAN-20635-0754-30-A1A 7.54 .297 19/64" .315" 3.110" 1.102" 1.614" SAN-20644-0794-30-A1A 7.94 .313 5/16" .315" 3.110" 1.102" 1.614" SAN-20653-0800-30-A1A 8.00 .315 - .315" 3.110" 1.102" 1.614" SAN-20429-0850-30-A1A 8.50 .335 - .393" 3.504" 1.181" 1.850" SAN-20665-0873-30-A1A 8.73 .344 11/32" .393" 3.504" 1.181" 1.850" SAN-20671-0900-30-A1A 9.00 .354 - .393" 3.504" 1.181" 1.850" SAN-20676-0950-30-A1A 9.50 .375 - .393" 3.504" 1.220" 1.850" SAN-20687-0952-30-A1A 9.52 .375 3/8" .393" 3.504" 1.220" 1.850" SAN-20689-1032-30-A1A 10.32 .406 13/32" .472" 4.016" 1.339" 2.165" SAN-20707-1071-30-A1A 10.71 .422 27/64" .472" 4.016" 1.339" 2.165" SAN-20716-1111-30-A1A 11.11 .437 7/16" .472" 4.016" 1.339" 2.165" SAN-20725-1151-30-A1A 11.51 .453 29/64" .472" 4.016" 1.378" 2.165" SAN-20734-1190-30-A1A 11.90 .469 15/32" .472" 4.016" 1.378" 2.165" SAN-20741-1230-30-A1A 12.30 .484 31/64" .551" 4.213" 1.496" 2.362" SAN-20749-1270-30-A1A 12.70 .500 1/2" .551" 4.213" 1.496" 2.362" SAN-20757-1310-30-A1A 13.10 .516 33/64" .551" 4.213" 1.496" 2.362" SAN-20763-1350-30-A1A 13.50 .531 17/32" .551" 4.213" 1.496" 2.362" SAN-20766-1429-30-A1A 14.29 .563 9/16" .630" 4.528" 1.614" 2.559" SAN-20777


























Carbide Cutting


-PF / GC4215Main Application Area: CNMG 432-PF

ap = .012 - .059"fn = .004 - .016"/rev

GEOMETRY -PFFINIshING OF sTEEL IN AvERAGE CONDITIONs

• Smoothandaccuratechipflowinaxialandradialturning,copying,chamferingandbackfacing operations

• Lowcuttingforces• Superbsurfacefinishesandclosetolerances• Alternateforfinishing:QFandLC

negative t-Max P insertsT-MaxPinsertscomplywithISOstandards.Alltypesofinsertshapesareavailable.

turning

-PM / GC4225Main Application Area: CNMG 432-PM

ap = .020 - .217"fn = .006 - .020"/rev

GEOMETRY -PMMEDIuM MAChINING OF sTEEL IN AvERAGE CONDITIONs

• Versatile,chipbreaker• Excellentperformancefromsemi-finishingto

lightroughing• Ensureshighproductivityandtroublefree

machining

ForacompleteassortmentofproductscheckoutSandvik’swebsite


ForpricingcallourCustomerServiceTeamat1-866-999-3117.

* Grade GC4225

MFG # IC

RECOMMENDED DEPTh OF CuT

APMX

FIRsT ChOICE GRADE GC4225

ORDER #CNMG 322-PM 3/8" .079" (.020 - .157") SAN-29986

432-PM 1/2" .118" (.020 - .217") SAN-32425433-PM 1/2" .118" (.031 - .217") SAN-32426542-PM 5/8" .157" (.020 - .283") SAN-33107543-PM 5/8" .157" (.031 - .283") SAN-29541642-PM 3/4" .157" (.020 - .339") SAN-05071643-PM 3/4" .157" (.031 - .339") SAN-32428

DNMG 331-PM 3/8" .079" (.016 - .197") SAN-33210332-PM 3/8" .079" (.020 - .197") SAN-32429431-PM 1/2" .118" (.016 - .236") SAN-33219432-PM 1/2" .118" (.020 - .236") SAN-32430433-PM 1/2" .118" (.031 - .236") SAN-33226

SNMG 431-PM 1/2" .118" (.016 - .236") SAN-30021432-PM 1/2" .118" (.020 - .236") SAN-33542433-PM 1/2" .118" (.031 - .236") SAN-33547543-PM 5/8" .157" (.031 - .295") SAN-30036

TNMG 331-PM 3/8" .118" (.016 - .197") SAN-33625332-PM 3/8" .118" (.020 - .197") SAN-29484432-PM 1/2" .157" (.020 - .260") SAN-32434433-PM 1/2" .157" (.031 - .260") SAN-33642

VNMG 332-PM 3/8" .079" (.020 - .157") SAN-32435WNMG 332-PM 3/8" .079" (.020 - .118") SAN-05499

432-PM 1/2" .098" (.020 - .157") SAN-32437433-PM 1/2" .098" (.031 - .157") SAN-29492

MFG # IC

RECOMMENDED DEPTh OF CuT

APMX

FIRsT ChOICE GRADE GC4215

ORDER #CNMG 431-PF 1/2” .016” (.010 - .059”) SAN-86198

432-PF 1/2” .016” (.012 - .059”) SAN-39036DNMG 331-PF 3/8” .016” (.010 - .059”) SAN-29991

431-PF 1/2” .016” (.010 - .059”) SAN-26065432-PF 1/2” .016” (.012 - .059”) SAN-26070441-PF 1/2” .016” (.010 - .059”) SAN-39322

SNMG 432-PF 1/2” .016” (.012 - .059”) SAN-30024431-QF* 1/2” .016” (.012 - .059”) SAN-34467

TNMG 331-PF 3/8” .016” (.010 - .059”) SAN-40393332-PF 3/8” .016” (.012 - .059”) SAN-40405432-PF 1/2” .016” (.012 - .059”) SAN-26092433-PF 1/2” .031” (.014 - .059”) SAN-26095

VNMG 331-PF 3/8” .016” (.010 - .059”) SAN-09664331-LC 3/8” .016” (.010 - .059”) SAN-40704332-PF 3/8” .016” (.012 - .059”) SAN-09665

WNMG 331-PF 3/8” .016” (.010 - .059”) SAN-40721431-PF 1/2” .016” (.010 - .059”) SAN-29583









































CARBIDE CuttIng


GEOMEtRY -pRECONOMY ROuGhING OF stEEL IN AVERAGE CONDItIONs

• Doublesidedpositivegeometryforbesteconomy and superb roughing performance, even on slender components

• Allpurposechipbreakerwithbroadestpossible working area

negative t-Max P InsertsT-Max P inserts comply with ISO standards.All types of insert shapes are available.

tuRnIng

-MF / GC2015Application Area: CNMG 432-MF

ap = .004 - .059"fn = .004 - .016"/rev

GEOMEtRY -MFFINIshING OF stAINLEss stEEL IN AVERAGE CONDItIONs

• Smoothcuttingactionduetosharp,positivecutting edge

• Coolantrecommendedwhenmachiningstainless steel

• Excellentchipcontrol• Goodsurfacefinishesandclosetolerances


-PR / GC4225Main Application Area:

CNMG 433-PRap = .039 -.291"

fn = .010 - .028"/rev

CNMG 644-PRap = .059 - .394"

fn = .012 - .031"/rev

MFG # IC

RECOMMENDED DEpth OF Cut

ApMX

FIRst ChOICE GRADE GC4225

ORDER #

CNMG 432-PR 1/2" .157" (.028 - .276") SAN-03199433-PR 1/2" .157" (.039 - .276") SAN-32440542-PR 5/8" .197" (.028 - .315") SAN-33108543-PR 5/8" .197" (.039 - .315") SAN-32442544-PR 5/8" .197" (.059 - .315") SAN-32443642-PR 3/4" .197" (.028 - .394") SAN-03224

DNMG 432-PR 1/2" .157" (.028 - .236") SAN-33223442-PR 1/2" .157" (.028 - .236") SAN-03035

SNMG 432-PR 1/2" .157" (.028 - .276") SAN-33543433-PR 1/2" .157" (.039 - .276") SAN-03701542-PR 5/8" .197" (.059 - .315") SAN-03707543-PR 5/8" .197" (.039 - .315") SAN-03710642-PR 3/4" .197" (.028 - .394") SAN-03742643-PR 3/4" .197" (.039 - .394") SAN-33565

TNMG 333-PR 3/8" .118" (.039 - .236") SAN-03833432-PR 1/2" .157" (.028 - .276") SAN-03841433-PR 1/2" .157" (.039 - .276") SAN-33643

WNMG 432-PR 1/2" .157" (.028 - .197") SAN-32446433-PR 1/2" .157" (.039 - .197") SAN-04471

MFG # IC


ApMX


ORDER #

CNMG 431-MF 1/2" .016" (.004 - .059") SAN-51401432-MF 1/2" .016" (.004 - .059") SAN-51403

DNMG 331-MF 3/8" .016" (.004 - .059") SAN-01652431-MF 1/2" .016" (.004 - .059") SAN-73435432-MF 1/2" .016" (.004 - .059") SAN-73401441-MF 1/2" .016" (.004 - .059") SAN-73442

SNMG 431-MF 1/2" .016" (.004 - .059") SAN-01676432-MF 1/2" .016" (.004 - .059") SAN-01679

TNMG 331-MF 3/8" .016" (.004 - .059") SAN-73458332-MF 3/8" .016" (.004 - .059") SAN-73460

VNMG 331-MF 3/8" .016" (.004 - .059") SAN-01704WNMG 431-MF 1/2" .016" (.004 - .059") SAN-73474

432-MF 1/2" .016" (.004 - .059") SAN-73476


































CARBIDE CuttIng

-MM / GC2025Main Application Area: CNMG 432-MM

ap = .020 - .224"fn = .005 - .018"/rev

GEOMEtRY -MMMEDIuM MAChINING IN stAINLEss stEEL IN AVERAGE CONDItIONs

• Firstchoiceforgeneralpurposeoperations• Profilingandlightinterruptedcutting• Moderatecuttingspeeds• Forgedandcastmaterials

negative t-Max P InsertsT-Max P inserts comply with ISO standards.All types of insert shapes are available.

tuRnIng

GEOMEtRY -MRMEDIuM ROuGhING IN stAINLEss stEEL IN DIFFICuLt CONDItIONs

• Firstchoiceforgeneralpurposeoperations• Profilingandlightinterruptedcutting• Moderatecuttingspeeds• Forgedandcastmaterials


-MR / GC2025Main Application Area:

CNMG 433-MRap = .079 - .029"

fn = .008 - .024"/rev

CNMG 644-MRap = .079 - .450"

fn = .010 - .028"/rev

MFG # IC


ApMX


ORDER #

CNMG 432-MM 1/2" .118" (.020 - .224") SAN-50445433-MM 1/2" .118" (.020 - .224") SAN-50447542-MM 5/8" .157" (.020 - .283") SAN-01572543-MM 5/8" .157" (.020 - .283") SAN-50451643-MM 3/4" .197" (.020 - .335") SAN-01578

DNMG 333-MM 3/8" .079" (.020 - .173") SAN-01586432-MM 1/2" .118" (.020 - .252") SAN-50459442-MM 1/2" .118" (.020 - .252") SAN-50463

SNMG 432-MM 1/2" .118" (.020 - .250") SAN-50465543-MM 5/8" .157" (.020 - .315") SAN-01685643-MM 3/4" .197" (.020 - .374") SAN-01692

TNMG 332-MM 3/8" .118" (.020 - .189") SAN-50471432-MM 1/2" .157" (.020 - .260") SAN-50473

VNMG 332-MM 3/8" .079" (.020 - .157") SAN-01598WNMG 332-MM 3/8" .079" (.020 - .118") SAN-01600

432-MM 1/2" .098" (.020 - .157") SAN-50479433-MM 1/2" .098" (.020 - .157") SAN-50480

MFG # IC


ApMX


ORDER #

CNMG 432-MR 1/2" .118" (.079 - .299") SAN-50446433-MR 1/2" .118" (.079 - .299") SAN-50448543-MR 5/8" .157" (.079 - .394") SAN-50452544-MR 5/8" .157" (.079 - .394") SAN-50454643-MR 3/4" .197" (.079 - .449") SAN-50455

DNMG 432-MR 1/2" .118" (.079 - .236") SAN-50459433-MR 1/2" .118" (.079 - .236") SAN-01605442-MR 1/2" .118" (.079 - .236") SAN-01666

SNMG 432-MR 1/2" .118" (.079 - .299") SAN-01610433-MR 1/2" .118" (.079 - .299") SAN-01682543-MR 5/8" .157" (.079 - .378") SAN-01686643-MR 3/4" .197" (.079 - .449") SAN-50467

TNMG 332-MR 3/8" .118" (.079 - .220") SAN-01697333-MR 3/8" .118" (.079 - .220") SAN-01618432-MR 1/2" .157" (.079 - .303") SAN-01620433-MR 1/2" .157" (.079 - .303") SAN-50475434-MR 1/2" .157" (.079 - .303") SAN-50476

WNMG 332-MR 3/8" .079" (.059 - .118") SAN-01714333-MR 3/8" .079" (.059 - .118") SAN-01718432-MR 1/2" .098" (.079 - .157") SAN-01623433-MR 1/2" .098" (.079 - .157") SAN-01625







































CARBIDE CuttIng


Coroturn 107 Screw lock InsertsScrew lock inserts comply with ISO standards.All types of insert shapes are available. See previous pages for geometry information.MFG #s ending in F are Finishing inserts.MFG #s ending in M are Medium inserts.MFG#sendinginALareforaluminum.

tuRnIng

RhOMBIC 80O RhOMBIC 55O

tRIANGuLAR


RhOMBIC 35O




CCMT-PF

CCMT-MF

CCMT-PM

CCGX-AL

CCMT-MM

CCMT-UM

DCMT-PF

DCMT-MF

DCMT-PM

DCGX-AL

DCMT-MM

DCMT-UM

TCMT-PF

TCMT-MF

TCMT-UM

TCGX-AL

VBMT-PF

VBMT-MF

VBMT-PM

VBMT-MM


MFG # IC GRADE ORDER #CCMT 2(1.5)1-PF 1/4" GC4215 SAN-38964

3(2.5)1-PF 3/8" GC4215 SAN-389713(2.5)1-MF 3/8" GC2015 SAN-121522(1.5)1-PM 1/4" GC4225 SAN-465642(1.5)2-PM 1/4" GC4225 SAN-465693(2.5)1-PM 3/8" GC4225 SAN-324093(2.5)2-PM 3/8" GC4225 SAN-324102(1.5)2-MM 1/4" GC2015 SAN-122553(2.5)2-MM 3/8" GC2025 SAN-105393(2.5)2-MM 3/8" GC1105 SAN-330512(1.5)1-UM 1/4" GC4225 SAN-347032(1.5)2-UM 1/4" GC4225 SAN-347053(2.5)2-UM 3/8" GC4225 SAN-34319

CCGX 2(1.5)1-AL 1/4" GC1810 SAN-261043(2.5)1-AL 3/8" GC1810 SAN-261053(2.5)2-AL 3/8" GC1810 SAN-26106

MFG # IC GRADE ORDER #DCMT 2(1.5)1-PF 1/4" GC4215 SAN-39202

3(2.5)1-PF 3/8" GC4215 SAN-392462(1.5)1-MF 1/4" GC1105 SAN-467913(2.5)1-MF 3/8" GC2015 SAN-106693(2.5)2-MF 3/8" GC2015 SAN-121702(1.5)2-PM 1/4" GC4225 SAN-331913(2.5)2-PM 3/8" GC4225 SAN-324132(1.5)2-MM 1/4" GC2025 SAN-107063(2.5)1-MM 3/8" GC2025 SAN-107203(2.5)1-MM 3/8" GC1105 SAN-331942(1.5)1-UM 1/4" GC4225 SAN-347733(2.5)2-UM 3/8" GC4225 SAN-34320

DCGX 2(1.5)1-AL 1/4" GC1810 SAN-261083(2.5)1-AL 3/8" GC1810 SAN-482793(2.5)2-AL 3/8" GC1810 SAN-48280

MFG # IC GRADE ORDER #VBMT 221-PF 1/4" GC4215 SAN-40663

331-PF 3/8" GC4215 SAN-40666332-PF 3/8" GC4215 SAN-40670221-MF 1/4" GC2015 SAN-12460222-MF 1/4" GC2015 SAN-12236331-PM 3/8" GC4215 SAN-40667332-PM 3/8" GC4215 SAN-40671331-MM 3/8" GC2025 SAN-10765332-MM 3/8" GC2025 SAN-10774

MFG # IC GRADE ORDER #TCMT 1.2(1.2)1-PF 5/32" GC4215 SAN-40205

1.2(1.2)2-PF 5/32" GC4215 SAN-402071.8(1.5)1-PF 7/32" GC4215 SAN-40208221-PF 1/4" GC4215 SAN-402191.2(1.2)1-MF 5/32" GC2015 SAN-121991.8(1.5)1-MF 7/32" GC2015 SAN-12209221-MF 1/4" GC2015 SAN-10681221-MF 1/4" GC1105 SAN-47219222-MF 1/4" GC2015 SAN-12227222-MF 1/4" GC1115 SAN-472223(2.5)1-MF 3/8" GC2015 SAN-122183(2.5)1-MF 3/8" GC1115 SAN-472242(1.5)2-UM 1/4" GC4225 SAN-354633(2.5)1-UM 3/8" GC1125 SAN-443633(2.5)2-UM 3/8" GC4225 SAN-35470

TCGX 2(1.5)1-AL 1/4" H10 SAN-687072(1.5)2-AL 1/4" H10 SAN-02933221-AL 1/4" H10 SAN-278783(2.5)1-AL 3/8" H10 SAN-687053(2.5)2-AL 3/8" H10 SAN-68706






























































CARBIDE CuttIng

GC30• Steel• Longtimesincut• Abrasivematerials• Moderatetolowcuttingdata

Multi-Material InsertsIf you have a flexible production with many diffeent materials and components, these inserts are something for you. With a minimum

tuRnIng

GEOMEtRY -XFFINIshING

• Designedforlightcuttingaction• Optimumchipbreakingwhenfinishing• Smoothchipforminginmediummachining

t-Max P InsertsT-Max P inserts comply with ISO standards.

set of geometries and grades, you have a simplified choice of inserts that are designed to efficiently machine different materials in various cutting conditions. They have been developed for maximum versatility to improve your efficiency.tEChNICAL FEAtuREs:• Geometriesaredesignedtomeetawideapplicationareaintermsoffeed

rates, depth of cut• Twogrades(GC15andGC30)thatprovidesecureperformancealsoin

difficult cuts in most workpiece materials

GC15• Stainlesssteel,HRSA• Interruptedcuts• Smallcomponents• Moderatetolowcuttingdata

GEOMEtRY -XMMEDIuM

• Lightcutting,stronggeometryforflexiblemachining• Balancededgeroundingformediumtoroughto

finishing machining• Chipformerformediumroughtofinishmachining

GEOMEtRY -XMRMEDIuM ROuGhING

• Reinforcedcuttingedgefortoughnessdemandingoperations

• Strong100o corner for security in high feed operations• Largecontactsurfacesforsecureandstablemachining



P M nSH K

MFG # IC


ApMX GRADE ORDER #DNMG 432-XM 1/2" .118" (.079 - .299") GC15 SAN-64285

432-XM 1/2" .118" (.079 - .299") GC30 SAN-64286CNMG 432-XM 1/2" .118" (.079 - .299") GC15 SAN-63805

432-XM 1/2" .118" (.079 - .299") GC30 SAN-63816TNMG 332-XM 3/8" .118" (.079 - .299") GC15 SAN-63812

332-XM 3/8" .118" (.079 - .299") GC30 SAN-63823WNMG 432-XM 1/2" .098" (.079 - .157") GC15 SAN-63814

432-XM 1/2" .098" (.079 - .157") GC30 SAN-63825

MFG # IC


ApMX GRADE ORDER #CNMG 432-XMR 1/2" .118" (.079 - .299") GC15 SAN-63806

432-XMR 1/2" .118" (.079 - .299") GC30 SAN-63817433-XMR 1/2" .118" (.079 - .299") GC15 SAN-63808433-XMR 1/2" .118" (.079 - .299") GC30 SAN-63819543-XMR 5/8" .157" (.079 - .394") GC15 SAN-64106543-XMR 5/8" .157" (.079 - .394") GC30 SAN-64107

MFG # IC


ApMX GRADE ORDER #DNMG 432-XF 1/2" .118" (.079 - .299") GC15 SAN-64283

432-XF 1/2" .118" (.079 - .299") GC30 SAN-64284CNMG 431-XF 1/2" .118" (.079 - .299") GC15 SAN-64088

431-XF 1/2" .118" (.079 - .299") GC30 SAN-64089432-XF 1/2" .118" (.079 - .299") GC15 SAN-63804432-XF 1/2" .118" (.079 - .299") GC30 SAN-63815

TNMG 331-XF 3/8" .118" (.079 - .299") GC15 SAN-64476331-XF 3/8" .118" (.079 - .299") GC30 SAN-64477332-XF 3/8" .118" (.079 - .299") GC15 SAN-63811332-XF 3/8" .118" (.079 - .299") GC30 SAN-63822

Always ordering the same items? Create a personalizedShoppingListonourwebsite

www.thomasskinner.com to make ordering fast and easy!

























Carbide Cutting


Why shOuLD yOu usE a WIpER?• Improvedmachiningeconomy• Excellentsurfacefinish• Eliminateexpensivegrindingoperations

ForacompleteassortmentofproductscheckoutSandvik’swebsitewww.sandvik.coromant.com.

ForpricingcallourCustomerServiceTeamat1-866-999-3117.

Wiper technology for High Feed MachiningIncreasingfeedratewithWiperinsertsisoneofthemosteffectivewaysofimprovingturningproductivity,

turning

ELImINatE gRINDINgWiperinsertscanachieveexcellentsurfacefinishandeliminatemanygrindingoperations.Wipersalsoimprovecomponentqualityandroundnesscomparedtogrinding.ThecornerradiusdesignofaWiperinsertallowsincreasedfeedwithoutaffectingsurfacefinish.

Wf - fOR pRODuctIvE LIght tuRNINg• Operations:longitudinalturningandfacing• Components:rigidshafts,axles,hubs,gears,etc• Advantages:doubleconventionalfeedrateswiththesamesurface

finishortwiceasgoodsurfacefinishvaluesforthesamefeed

WmX - fOR pRODuctIvE mEDIum tuRNINg• Operations:longitudinalturningandfacing• Components:rigidshafts,axles,hubs,gears,etc• Advantages:idealwhengoodsurfacefinishisapriority;canreplace

grindingoperation;improvedchipbreakingduetohighfeedrate;improvedtoollife(components/edge)duetoshortercuttingedgeengagementtime

WR - fOR pRODuctIvE hEavy tuRNINg• Operations:longitudinalturning,facingandprofiling• Components:axles,hubs,gears,etc• Advantages:universalcapability,double-sidedinsertgeometry

withhighroughingcapabilitycontributingtowardsgoodmachiningeconomy

cONDI-tION mfg # Ic

REcOmmENDED DEpth Of cut

apmX gRaDE ORDER #LI

GHT

CNMG 321-WF 3/8" .020"(.012-.259") GC4215 SAN-39018322-WF 3/8" .039"(.012-.279") GC4215 SAN-39024431-WF 1/2" .016"(.010-.118") GC4215 SAN-39031432-WF 1/2" .039"(.010-.157") GC4215 SAN-39042433-WF 1/2" .059"(.016-.157") GC4215 SAN-39101

DNMX 331-WF 3/8" .039"(.008-.059") GC4215 SAN-39358332-WF 3/8" .039"(.008-.118") GC4215 SAN-39359431-WF 3/8" .031"(.080-.118") GC4215 SAN-39362432-WF 3/8" .059"(.008-.118") GC4215 SAN-39363433-WF 3/8" .059"(.016-.138") GC4215 SAN-39365441-WF 1/2" .031"(.080-.118") GC4215 SAN-39368442-WF 1/2" .059"(.008-.118") GC4215 SAN-39369443-WF 1/2" .059"(.016-.138") GC4215 SAN-39371

MED

IUM

CNMG 432-WMX 1/2" .118"(.020-.197") GC4215 SAN-43253433-WMX 1/2" .138"(.031-.236") GC4215 SAN-43257542-WMX 5/8" .118"(.020-.197") GC4215 SAN-43435543-WMX 5/8" .138"(.031-.236") GC4215 SAN-43446

DNMX 432-WMX 1/2" .118"(.020-.197") GC4215 SAN-43696433-WMX 1/2" .138"(.031-.236") GC4215 SAN-43703434-WMX 1/2" .138"(.020-.236") GC4215 SAN-43710442-WMX 1/2" .059"(.016-.138") GC4215 SAN-43758443-WMX 1/2" .118"(.020-.197") GC4215 SAN-43765444-WMX 1/2" .138"(.031-.236") GC4215 SAN-43772

HEAV

Y

CNMM 432-WR 1/2" .098"(.031-.197") GC4215 SAN-39140433-WR 1/2" .098"(.039-.197") GC4215 SAN-39144434-WR 1/2" .098"(.047-.197") GC4215 SAN-39153543-WR 5/8" .118"(.047-.236") GC4215 SAN-39158644-WR 3/4" .130"(.063-.234") GC4215 SAN-39169

TNMX 433-WR 1/2" .098"(.039-.197") GC4215 SAN-40612































CARBIDE CuttIng

DDJNR/LDSRNR

DTGNR/L

DTJNR/L

DSDNN

negative Insert Holders

tuRnIng

EXtERNAL MAChININGRight hand shown

MAIN spARE pARts

For a complete assortment of products check out

Sandvik’s website www.sandvik.coromant.com.


1-866-999-3117.

DCRNR/L

DCLNR/L

DWLNR/L

DVJNR/L

MFG#INsERt

sIZEDIMENsIONs

ORDER #B WF LF OhNDCLNR 124B 1/2" .750" 1.000" 4.500" 1.260" SAN-04815

164D 1/2" 1.000" 1.250" 6.000" 1.260" SAN-00447165D 5/8" 1.000" 1.250" 6.000" 1.540" SAN-00449204D 1/2" 1.250" 1.500" 6.000" 1.260" SAN-04897205D 5/8" 1.250" 1.500" 6.000" 1.540" SAN-04899206D 3/4" 1.250" 1.500" 6.000" 1.700" SAN-00451245D 5/8" 1.500" 2.000" 6.000" 1.540" SAN-04967246D 3/4" 1.500" 2.000" 6.000" 1.700" SAN-04971

DCLNL 124B 1/2" .750" 1.000" 4.500" 1.260" SAN-04816164D 1/2" 1.000" 1.250" 6.000" 1.260" SAN-00448165D 5/8" 1.000" 1.250" 6.000" 1.540" SAN-00450

DCRNR 164DM1 1/2" 1.000" 1.048" 6.000" 1.350" SAN-23839DDJNR 164D 1/2" .750" 1.000" 4.500" 1.180" SAN-00453

204D 1/2" 1.250" 1.500" 6.000" 1.550" SAN-15677DDJNL 124B 1/2" .750" 1.000" 4.500" 1.550" SAN-18836

164D 1/2" .750" 1.000" 4.500" 1.180" SAN-00454DSRNR 164D 1/2" 1.000" 1.048" 6.000" 1.350" SAN-23854DTGNR 123B 3/8" .750" 1.000" 4.500" .970" SAN-19005

163D 3/8" 1.000" 1.250" 6.000" .970" SAN-00457164D 1/2" 1.000" 1.250" 6.000" 1.260" SAN-00459204D 1/2" 1.250" 1.500" 6.000" 1.310" SAN-19008

DTJNR 123B 3/8" .750" 1.000" 4.500" .953" SAN-19025163D 3/8" 1.000" 1.250" 6.000" .980" SAN-19027164D 1/2" 1.000" 1.250" 6.000" 1.283" SAN-19028

DSDNN 124B 1/2" .750" .386" 4.500" 1.450" SAN-18887164D 1/2" 1.000" .512" 6.000" 1.450" SAN-18888165D 5/8" 1.000" .520" 6.000" 1.760" SAN-18890

DWLNR 124C 1/2" .750" 1.000" 5.000" 1.378" SAN-13568163D 3/8" 1.000" 1.250" 6.000" 1.067" SAN-13560164D 1/2" 1.000" 1.250" 6.000" 1.378" SAN-13564

DVJNR 123B 3/8" .750" 1.000" 4.500" 1.830" SAN-23900163D 3/8" 1.000" 1.250" 6.000" 1.830" SAN-23901

DVJNL 163D 3/8" 1.000" 1.250" 6.000" 1.830" SAN-23897

INsERt sIZEshIM sCREW ORDER # shIM ORDER #

COMpLEtE CLAMp sEt ORDER #IC

DCLNR1/2" 5513 020-02 SAN-40561 5322 234-01 SAN-01212 5412 028-021 SAN-014725/8" 5513 020-07 SAN-40566 5322 234-03 SAN-01216 5412 028-031 SAN-030713/4" 5513 020-07 SAN-40566 5322 236-01 SAN-01217 5412 028-041 SAN-03072

DCRNR, DDjNR3/8" 5513 020-04 SAN-40563 5322 267-01 SAN-08214 5412 028-011 SAN-013831/2" 5513 020-02 SAN-40561 5322 266-01 SAN-01214 5412 028-021 SAN-01472

DsRNR1/2" 5513 020-02 SAN-40561 5322 425-01 SAN-01211 5412 028-021 SAN-01472

DtNjR3/8" 5513 020-04 SAN-40573 5322 315-02 SAN-01210 5412 028-011 SAN-013833/8" 5513 020-02 SAN-40561 5322 315-04 SAN-01215 5412 028-021 SAN-01472

DWLNR3/8" 5513 020-04 SAN-40563 5322 328-01 SAN-16700 5412 028-011 SAN-013831/2" 5513 020-02 SAN-40561 5322 331-12 SAN-11754 5412 028-021 SAN-01472

DVjNR3/8" 5513 020-09 SAN-40568 5322 269-01 SAN-20215 5412 028-061 SAN-19670



































































CARBIDE CuttIng


MFG#INsERt

sIZEDIMENsIONs

ORDER #DMM DMIN LFA12S DTFNR 3 3/8" .750" 1.024" 10.000" SAN-41791A16T DCLNR4 1/2" 1.000" 1.280" 12.000" SAN-13968

DDUNR 3 3/8" 1.000" 1.299" 12.000" SAN-13978DDUNR 4 1/2" 1.000" 1.500" 12.000" SAN-13982DTFNR 3 3/8" 1.000" 1.201" 12.000" SAN-13996DWLNR4 1/2" 1.000" 1.299" 12.000" SAN-41811

A20T DCLNR4 1/2" 1.250" 1.468" 12.000" SAN-41832DDUNR 4 1/2" 1.250" 1.705" 12.000" SAN-41836DWLNR4 1/2" 1.250" 1.705" 12.000" SAN-41844

A24T DCLNR4 1/2" 1.500" 1.760" 12.000" SAN-41851DCLNR5 5/8" 1.500" 1.760" 12.000" SAN-41852DDUNR 4 1/2" 1.500" 2.000" 12.000" SAN-41854DTFNR 4 1/2" 1.500" 1.760" 12.000" SAN-41860DWLNR4 1/2" 1.500" 2.000" 12.000" SAN-41864

A32U DCLNR5 5/8" 2.000" 2.402" 14.000" SAN-41896

A...DCLNR

A...DDUNR

A...DTFNR

A...DWLNR

INtERNAL MAChINING BORING BARsnegative Insert Holders

tuRnIng

MAIN spARE pARtsTo modify CoroTurn RC holders for other inserts see Sandvik’s Main Catalogue

Positive Insert HoldersEXtERNAL MAChINING

SCLCR

SVVBN

SRSCR

STGCR

MFG#INsERt

sIZEDIMENsIONs

ORDER #B WF LF OhNSCLCR 083 3/8" .500" .625" 3.500" .390" SAN-35943

103 3/8" .625" .750" 4.000" .630" SAN-35944123B 3/8" .750" 1.000" 4.500" .630" SAN-35945

SRSCR 123B 3/8" .750" 1.000" 4.500" 1.082" SAN-36008163C 3/8" 1.000" 1.250" 5.000" 1.332" SAN-36011164D 1/2" 1.000" 1.250" 6.000" 1.446" SAN-36014204D 1/2" 1.250" 1.500" 6.000 1.446" SAN-36017206D 3/4" 1.000" 1.500" 6.000 1.663" SAN-36018

STGCR 082 1/4" .500" 6.250" 3.500" .560" SAN-36058103 3/8" .625" .750" 4.000" .830" SAN-36059123B 3/8" .750" 1.000" 4.500" .830" SAN-36060163D 3/8" 1.000" 1.250" 6.000" .830" SAN-36062

SVVBN 122B 1/4" .750" .386" 4.500" 1.060" SAN-36513123B 3/8" .750" .398" 4.500" 1.060" SAN-36077163C 3/8" 1.000" .523" 5.000" 1.060" SAN-36078

INsERt sIZE

shIM ORDER # shIM sCREW ORDER #COMpLEtE CLAMp sEt ORDER #Bar dia, DMM

DCLNR1.000 - 1.500" 5322 236-03 SAN-13718 5513 020-02 SAN-40561 5412 028-021 SAN-014721.500 - 2.500" 5322 234-03 SAN-01216 5513 020-07 SAN-10566 5412 028-031 SAN-03071

DDuNR.750 - 1.250" 5322 267-01 SAN-08214 5513 020-04 SAN-40563 5412 028-011 SAN-013831.000 - 2.500" 5322 266-02 SAN-01213 5513 020-02 SAN-40561 5412 028-021 SAN-01472

DtFNR- 5322 426-01 SAN-13720 5513 020-04 SAN-10563 5412 028-011 SAN-01383- 5322 425-01 SAN-01211 5513 020-02 SAN-40561 5412 028-021 SAN-01472- 5322 425-01 SAN-01211 5513 020-02 SAN-40561 5412 028-021 SAN-01472

DWLNR1.000" 5322 328-02 SAN-43237 5513 020-02 SAN-40561 5412 028-021 SAN-01472

1.250 - 2.000" 5322 331-12 SAN-11754 5513 020-02 SAN-40561 5412 028-021 SAN-01472



























































CARBIDE CuttIng

E...-SDUCR

A...-SDUCR

Positive Insert HolderstuRnIng

INtERNAL MAChINING

A...-STFCR

A... Steel shank, coolant thruE... Carbide shank, coolant thru

COROtuRN 107 BORING BARRound boring bars have been introduced and more bars now have aninternalcoolantsupplyforimprovedchipevacuation.Lasermarking of bars is introduced for easy reference of spares and overhang dimensions. Reduced length bars are available for an easier fit into machines.




A...-SCLCR

E...-SCLCR

MFG#INsERt

sIZE

DIMENsIONs

ORDER #DMM DMIN LF GAuGE INsERtFor EasyFix sleevesA04F STFCR 1.2-R 5/32" .250" .342" 3.248" TCMT 1.2(1.2)0 SAN-34559A05H STFCR 1.2-R 5/32" .312" .413" 4.000" TCMT 1.2(1.2)0 SAN-34561A06M SCLCR2-R 1/4" .375" .480" 6.000" CCMT 2(1.5)1 SAN-36835

STFCR 1.8-R 7/32" .375" .500" 6.000" TCMT 1.8(1.5)1 SAN-34569A08M SCLCR2-R 1/4" .500" .598" 6.000" CCMT 2(1.5)1 SAN-36918

STFCR 1.8-R 7/32" .500" .642" 6.000" TCMT 1.8(1.5)1 SAN-34577A10R SCLCR2-R 1/4" .625" .772" 8.000" CCMT 2(1.5)1 SAN-36992

SCLCR3-R 3/8" .625" .772" 8.000" CCMT 3(2.5)2 SAN-36993A12S SCLCR3-R 3/8" .750" .929" 10.000" CCMT 3(2.5)2 SAN-37021E04H STFCR 1.2-R 5/32" .250" .342" 4.000" TCMT 1.2(1.2)0 SAN-34817E05K STFCR 1.2-R 5/32" .312" .413" 5.000" TCMT 1.2(1.2)0 SAN-34819For insert with thickness 2 = 1/8"A06M STFCR 2-B1 1/4" .375’ .500" 6.000" TCMT 221 SAN-17849A08M STFCR 2-B1 1/4" .500" .598" 6.000" TCMT 221 SAN-17851A10R STFCR 2-B1 1/4" .625" .772" 8.000" TCMT 221 SAN-11844A12S STFCR 2-B1 1/4" .750" .929" 10.000" TCMT 221 SAN-11848Cylindrical with flatsA06M SCLCR2 1/4" .375" .480" 6.000" CCMT 2(1.5)1 SAN-34565

SDUCR 2 1/4" .375" .598" 6.000" DCMT 2(1.5)1 SAN-34567STFCR 2 1/4" .375" .500" 6.000" TCMT 2(1.5)1 SAN-54103

A08M SCLCR2 1/4" .500" .598" 6.000" CCMT 2(1.5)1 SAN-34573SDUCR 2 1/4" .500" .728" 6.000" DCMT 2(1.5)1 SAN-34575STFCR 2 1/4" .500" .589" 6.000" TCMT 2(1.5)1 SAN-54105

A12S STFCR 2-B1 1/4" .750" .929" 10.000" TCMT 221 SAN-11848A16T STFCR 3 3/8" 1.00" 1.201" 12.000" TCMT 3(2.5)2 SAN-41816A20T SDUCR 3 3/8" 1.250" 1.579" 12.000" DCMT 3(2.5)2 SAN-37071

STFCR 3 3/8" 1.250" 1.468" 12.000" TCMT 3(2.5)2 SAN-41847E06M SCLCR2 1/4" .375" .480" 6.000" CCMT 2(1.5)1 SAN-34821

SDUCR 2 1/4" .375" .598" 6.000" DCMT 2(1.5)1 SAN-34823E08R SCLCR2 1/4" .500" .598" 8.000" CCMT 2(1.5)1 SAN-34827

SDUCR 2 1/4" .500" .716" 8.000" DCMT 2(1.5)1 SAN-34829E10R SCLCR2 1/4" .625" .772" 8.000" CCMT 2(1.5)1 SAN-34833

SDUCR 2 1/4" .625" .850" 8.000" DCMT 2(1.5)1 SAN-34835E12S SCLCR3 3/8" .750" .929" 10.000" CCMT 3(2.5)2 SAN-34837

SDUCR 3 3/8" .750" 1.039" 10.000" DCMT 3(2.5)2 SAN-34839E16T SCLCR3 3/8" 1.000" 1.201" 12.000" CCMT 3(2.5)2 SAN-34841

SDUCR 3 3/8" 1.000" 1.299" 12.000" DCMT 3(2.5)2 SAN-34843





































CARBIDE CuttIng

Coroturn SltuRnIng

Anti-vibration boring bars with exchangeable cutting headsFor different types of internal applications

ANtI-VIBRAtION BORING BARsSteel bars, not dampened

With internal coolant supply

NPT thread = Dth

A570-2C max recommended overhang 4 x DMM

A570-3C short design, max recommended overhang 7 x DMM

A570-3C long design, max recommended overhang 10 x DMM

MODIFYING OF stANDARD BARs

Sandvik recommends a min clamping length of 4 x DMM

Build the most versatile range of cutting units from the smallest and most manageable inventory.

ChOICE OF BARTheCoroTurnSLboringbarassortmentconsistsof:• BothCoromantCaptoandconventionalshankdesign• Solidsteelbars,dampenedSilentToolsanddampenedcarbidereinforced• Alltypesofbarshavethroughcoolantsupply

A FLEXIBLE MODuLAR sYstEMByusingaCoroTurnSLbarvarioustypesofcuttingheadscanbeused:For general turning:• CoroTurnRC• CoroTurnHP(highpressure)• T-MaxPleverclamp• CoroTurn107• CoroTurn111• CoroTurnTR

For grooving:• CoroCut1-2• CoroCut3• T-MaxQ-Cut• CoroCutXS

For threading:• CoroThread266forinternalandexternalmachining• T-MaxU-Lock• TwinLockforoilpartthreading

570-2C...-40Bars with reduction dia

570-3C

570-3C...-40Bars with reduction dia

570-2CEasyFix for .625 - 1.000" (16 - 25mm)

BAR DIA L, min length after cut off

DMM short design 7 x DMM

Long design 10 x DMM

.625" 4 7

.750" 5 81.000" 7 111.250" 8 131.500" 10 171.750" 10.4 182.000" 12 212.500" 15 25

MFG#

BAR DIA MAX OVERhANG

COupLING sIZE DIMENsIONs

ORDER #DMM dmt DMIN l1 Dth

A570-2C D12 05-20 .750” 4 x DMM 20 .984” 5.200” 1/4” SAN-06032D16 07-25 1.000” 4 x DMM 25 1.260” 7.200” 1/4” SAN-06033D20 09-32 1.250” 4 x DMM 32 1.575” 8.740” 3/8” SAN-06041D24 11-40 1.500” 4 x DMM 40 1.969” 10.750” 1/2” SAN-06042

A570-3C D10 06-16 .625” 7 x DMM 16 .787” 6.140” 1/8” SAN-28994D12 08-20 .750” 7 x DMM 20 .984” 7.870” 1/4” SAN-28995D16 10-25 1.000” 7 x DMM 25 1.260” 10.200” 1/4” SAN-28996D16 13-25 1.000” 10 x DMM 25 1.260” 13.210” 1/4” SAN-28989D20 12-32 1.250” 7 x DMM 32 1.575” 12.490” 3/8” SAN-28997D20 16-32 1.250” 10 x DMM 32 1.575” 16.240” 3/8” SAN-28990D24 15-32 1.500” 7 x DMM 32 1.969” 15.260” 1/2” SAN-28998D24 20-32 1.500” 10 x DMM 32 1.969” 19.800” 1/2” SAN-29991D28 17-40 1.750” 7 x DMM 40 2.000” 17.008” 1/2” SAN-27951D28 23-40 1.750” 10 x DMM 40 2.000” 22.992” 1/2” SAN-27952D32 21-40 2.000” 7 x DMM 40 2.402” 20.740” 1/2” SAN-22591D32 27-40 2.000” 10 x DMM 40 2.402” 26.730” 1/2” SAN-22592D40 26-40 2.500” 7 x DMM 40 2.953” 26.240” 3/4” SAN-22593D40 34-40 2.500” 10 x DMM 40 2.953” 33.720” 3/4” SAN-22594


















CARBIDE CuttIng

Coroturn RCtuRnIng

EXChANGEABLE CuttING hEADs WIth COROtuRN sL COupLINGInternal machining

570-DCLNR/L


Entering angle = KAPR 95o

Leadangle=-5o

570-DDuNR/L



Leadangle=-3o

570-DDuNR/L-X



Leadangle=-3o

570-DtFNR/L



Leadangle=-1o

* To use 432 insert thicker shim must be used

sL-pCLNR/L-hp

With internal high pressure coolant supply


Leadangle=-5o

sL-pDuNR/L-hp

With internal high pressure coolant supply


Leadangle=-3o

570-DVuNR/L



Leadangle=-3o

570-sDuCR/L



Leadangle=-3o

570-stFCR/L



Leadangle=-1o

570-DCLNR/L

570-DTFNR/L

570-DDUNR/L

570-DDUNR/L-X

570-DVUNR/L

SL-PCLNR/L-HP

SL-PDUNR/L-HP

MFG#INsERt

sIZE


GAuGE INsERt ORDER #DCsFMs DMIN LFRigid clamp design570-DCLNR 32-12-L 1/2" 32 1.575" 1.496" CNMG 432 SAN-26287

40-12-L 1/2" 40 1.968" 1.496" CNMG 432 SAN-5339340-16-L 5/8" 40 2.244" 1.575" CNMG 543 SAN-41686

570-DCLNL 32-12-L 1/2" 32 1.575" 1.496" CNMG 432 SAN-2628940-12-L 1/2" 40 1.968" 1.496" CNMG 432 SAN-42339140-16-L 5/8" 40 2.244" 1.575" CNMG 543 SAN-45324

570-DTFNR 32-16-L 3/8" 32 1.575" 1.417" TNMG 332 SAN-2340840-16-L 3/8" 40 1.968" 1.417" TNMG 332 SAN-23409

570-DTFNL 32-16-L 3/8" 32 1.575" 1.417" TNMG 332 SAN-2340640-16-L 3/8" 40 1.968" 1.417" TNMG 332 SAN-23407

Rigid clamp design - back boring570-DDUNR 32-11 3/8" 32 1.575" 1.260" DNMG 332 SAN-23398

40-15* 1/2" 40 1.968" 1.260" DNMG 442 SAN-2340032-11X 3/8" 32 1.575" .787" DNMG 332 SAN-2339940-15X* 1/2" 40 1.968" .787" DNMG 442 SAN-23401

570-DDUNL 32-11 3/8" 32 1.575" 1.260" DNMG 332 SAN-2339440-15* 1/2" 40 1.968" 1.260" DNMG 442 SAN-2339632-11X 3/8" 32 1.575" .787" DNMG 332 SAN-2339540-15X* 1/2" 40 1.968" .787" DNMG 442 SAN-23397

570-DVUNR 40-16 3/8" 40 2.047" 1.417" VNMG 332 SAN-49685570-DVUNL 40-16 3/8" 40 2.047" 1.417" VNMG 332 SAN-49684t-Max p lever clamp designSL-PCLNR 32-12-HP 1/2" 32 1.575" 1.260" CNMG 432 SAN-44129

40-12-HP 1/2" 40 1.968" 1.378" CNMG 432 SAN-44130SL-PCLNL 32-12-HP 1/2" 32 1.575" 1.260" CNMG 432 SAN-44126

40-12-HP 1/2" 40 1.968" 1.378" CNMG 432 SAN-44127SL-PDUNR 40-15-HP* 1/2" 40 2.205" 1.417" DNMG 442 SAN-44135SL-PDUNL 40-15-HP* 1/2" 40 2.205" 1.417" DNMG 442 SAN-44133Coroturn 107 screw clamp design570-STFCR 16-11-B1 1/4" 16 .787" .787" TCMT 221 SAN-29723

20-11-B1 1/4" 20 .984" .787" TCMT 221 SAN-2966925-11-B1 1/4" 25 1.260" .787" TCMT 221 SAN-29670

570-STFCL 16-11-B1 1/4" 16 .787" .787" TCMT 221 SAN-2966720-11-B1 1/4" 20 .984" .787" TCMT 221 SAN-2966825-11-B1 1/4" 25 1.260" .787" TCMT 221 SAN-29721

Coroturn 107 screw clamp design - back boring - rhombic 55o

570-SDUCR 25-11 - 25 1.260" .787" DCMT 3(2.5)2 SAN-2971432-11 - 32 1.575" 1.260" DCMT 3(2.5)2 SAN-2978340-11 - 40 1.986" 1.260" DCMT 3(2.5)2 SAN-29795

570-SDUCL 25-11 - 25 1.260" .787" DCMT 3(2.5)2 SAN-2971132-11 - 32 1.575" 1.260" DCMT 3(2.5)2 SAN-2978140-11 - 40 1.986" 1.260" DCMT 3(2.5)2 SAN-29793

570-STFCR/L 570-SDUCR/L







































CARBIDE CuttIng


Corothread 266 SltuRnIng

EXChANGEABLE CuttING hEADsInternal machining

Screw clamp design





FOR CORRECt MOuNtING OF CYLINDRICAL BARs

EasyFix Sleeves

Square sleeves also available

CYLINDRICAL sLEEVEsEasyFix offers a fast and simple way to achieve correct indexing of centre height when mounting cylindrical bars into the machine, due to its spring load plunger design.The slot in the cylindrical sleeve is filled with a silicon sealer which allows the existing coolant supply system to be used.A spring plunger mounted in the sleeve clicks into a groove in the bar and guarantees correct centre height and fast and simple handling when mounting the cylindrical bar into the machine.EasyFix sleeves can hold many products; CoroTurn 107, CoroTurn 111, Silent Tools dampened boring bars, CoroCut boring bars, and CoroCut MB.

MFG#FOR BAR

DIADIMENsIONs

ORDER #OhX OAL DMM132P -160333-B .187" .197" 3.35" 1.000" SAN-19692

-160433-B .250" .197" 3.35" 1.000" SAN-19088-160533-B 312" .197" 3.35" 1.000" SAN-19072-160633-B .375" .197" 3.35" 1.000" SAN-19073-160833-B .500" .197" 3.35" 1.000" SAN-18545-161033-B .625" .197" 3.35" 1.000" SAN-18546-200633-B .375" .197" 3.35" 1.250" SAN-21236-200833-B .500" .197" 3.35" 1.250" SAN-18547-201033-B .625" .197" 3.35" 1.250" SAN-18548-201233-B .750" .197" 3.35" 1.250" SAN-18549-240841-B .500" .197" 4.13" 1.500" SAN-18550-241041-B .625" .197" 4.13" 1.500" SAN-18551-241241-B .750" .197" 4.13" 1.500" SAN-18552-241641-B 1.000" .197" 4.13" 1.500" SAN-26285-320849-B .500" .197" 4.92" 2.000" SAN-18553-321049-B .625" .197" 4.92" 2.000" SAN-18554-321249-B .750" .197" 4.92" 2.000" SAN-18555-321649-B 1.000" .197" 4.92" 2.000" SAN-26286

132L -1606050-B 6mm .197" 2.165" 1.000" SAN-27658-1208050-B 8mm .197" 2.165" .750" SAN-26281-1608050-B 8mm .197" 2.165" 1.000" SAN-26283-1212050-B 12mm .197" 2.165" .750" SAN-38361-1612050-B 12mm .197" 2.165" 1.000" SAN-31117

MFG#INsERt

sIZE

pItCh RANGE


ORDER #tpI DCsFMs DMIN LFSL-266RKF 252517-16 3/8" 32-6 25 1.260" .984" SAN-49129

323222-16 3/8" 32-6 32 1.575" 1.260" SAN-49130403227-16 3/8" 32-6 40 1.968" 1.260" SAN-49131323222-22 1/2" 11.5-4 32 1.575" 1.260" SAN-42621403227-22 1/2" 11.5-4 40 1.968" 1.260" SAN-42622

SL-266LKF 252517-16 3/8" 32-6 25 1.260" .984" SAN-49123323222-16 3/8" 32-6 32 1.575" 1.260" SAN-49124403227-16 3/8" 32-6 40 1.968" 1.260" SAN-49125323222-22 1/2" 11.5-4 32 1.575" 1.260" SAN-46218403227-22 1/2" 11.5-4 40 1.968" 1.260" SAN-46219



































CARBIDE CuttIngtuRnIng

Carbide Insert gradesstEELCt5015An uncoated cermet with excellent resistance to built-up edge and plastic deformation. New formula with improved toughness. For finishing of low alloy and alloy steels when high surface quality and/or low cutting force are required. fn x ap < .0005 inch2

GC1515A thin CVD-coated micro-grain carbide. Recommended for finishing of low carbon to low alloy steels, and other “sticky” steel alloys using medium to low cutting speed. Excellent when surface finish or sharp cutting action is needed. Great resistance to thermal shock makes it also suitable for light intermittent cuts.GC1525A PVD coated cermet. Very high wear resistance and good edge toughness. For finishing and semi-finishing of low carbon and low alloyed steels. To be used when good surface quality is demanded at medium to high cutting speeds. fn x ap < .0005 inch2

GC4205A CVD coated grade with excellent resistance against crater wear and plastic deformation. Recommended for stable conditions when higher metal removal rate is needed in medium to rough steel applications. Is able to withstand high temperatures without sacrificing edge line security in wet and dry machining.GC4215CVD coated carbide grade for finishing to roughing in applications with continuous cut to light intermittent cuts in steel and steel castings. A gradient substrate with optimized hardness and toughness, with a wear resistant coating. Able to withstand high temperatures without sacrificing edge line security in wet and dry applications.GC4225CVD-coated carbide grade for finishing to roughing of steel and steel castings. A gradient substrate with optimized hardness and toughness for steel turning in combination with a thick wear resistant coating. This grade can handle continuous cuts as well as interrupted cuts at high metal removal rates. A grade for a broad application area.GC4235CVD coated carbide grade for roughing of steel and steel castings under unfavorable conditions. A gradient substrate with optimized hardness and toughness for steel turning combined with a thick wear resistant coating. The edge line security enables the grade to handle interrupted cuts at high metal removal rates.

stAINLEss stEELGC1125A PVD-coated micro-grain carbide. Recommended for finishing of all kinds of stainless steels using medium to low cutting speeds. Excellent when sharp cutting action combined with superior edge toughness or surface finish is needed. Great resistance to thermal shock makes it also suitable for light intermittent cuts.

GC2015CVD coated carbide grade for finishing and light roughing of stainless steels. A substrate, which can handle high temperatures, combined with a wear resistant coating makes this grade a first choice for continuous cuts at moderate to high cutting speeds.

stAINLEss stEEL continuedGC2025CVD coated carbide optimized for semi-finishing to roughing of austenitic stainless and duplex stainless steels at moderate cutting speeds. Good resistance to thermal shock and mechanical shock provides excellent edge security for interrupted cuts.

GC2035PVD coated carbide. Recommended for semi-finishing to roughing of austenitic stainless and duplex stainless steels at low to moderate cutting speeds. Great resistance to thermal shock makes it ideal for applications with fast intermittent cuts.

GC235CVD coated carbide grade for roughing of stainless steels and stainless steel castings with difficult skin. The tough substrate provides extremely good edge security which allows the grade to handle heavy interrupted cuts at low to moderate speeds.

GC1115A PVD coated fine-grained carbide. The substrate has high hot hardness and good resistance against plastic deformation combined with good edge line security. The thin PVD-oxide coating offers excellent resistance to smearing material and good adhesion on sharp edges. This guarantees toughness, even flank wear and high performance.

CAst IRONCB7525An extremely hard cubic boron nitride grade. High edge toughness and good wear resistance makes it optimal for high speed finishing of gray cast iron under continuous as well as interrupted conditions.

CC6190Pure silicon nitride-based ceramic providing good wear resistance at high temperatures. Recommended for high speed roughing to finishing of cast irons under good conditions. Is able to handle some interruptions.

GC1690A CVD coated silicon nitride ceramic grade. The properties of GC1690 make it highly recommendable for light roughing, medium and finishing applications in cast iron.

GC3205CVD coated cemented carbide consisting of a thick, smooth, wear resistant coating and a very hard substrate. Recommended for high speed turning of gray cast iron (GCI).GC3210CVD coated cemented carbide consisting of a thick, smooth, wear resistant coating and a very hard substrate. Recommended for high speed turning of nodular cast iron (NCI).GC3215CVD coated cemented carbide consisting of a thick, smooth, wear resistant coating and a very hard substrate capable of withstanding demanding interrupted cuts. Recommended as first choice for roughing of all cast irons at low to medium cutting speeds.

Carbide Cutting


t-Max Q-Cut PartingINsERts

Parting & grooving

GEOmEtRy -4E – FOR hIGh pRODuctIvIty IN paRtING OFF baRsStrong cutting edge. Excellent for interrupted cuts and tough demanding operations.

GEOmEtRy -5E – FOR LOw cuttING FORcEs IN paRtING OFF baRsPositive geometry with low cutting forces. Excellent chip control at low feeds.

TolerancesCW = + .004"RE = + .004"

-4E -5E

K cast IRONm staINLEss stEELp stEELFirst choice!

-4E/Gc1125

First choice!

-5E/Gc1125

First choice!

-4E/Gc1125

Neutral inserts listed. Right and left available.


P M K n S H




sEat sIZE mFG # GRaDE

DImENsIONsORDER #cw RE

25 N151.2-250-4E GC1125 .098” .012” SAN-42302N151.2-250-4E GC235 .098” .012” SAN-71394N151.2-250-4E H13A .098” .012” SAN-71609




60 N151.2-600-4E GC1125 .236” .016” SAN-42336N151.2-600-4E GC235 .236” .016” SAN-66441N151.2-600-4E GC4225 .236” .016” SAN-37461



30 N151.2-300-5E GC1125 .118” .008” SAN-42312N151.2-300-5E GC235 .118” .008” SAN-72653N151.2-300-5E GC2145 .118” .008” SAN-06824N151.2-300-5E H13A .118” .008” SAN-72652









































CARBIDE CuttIngPARtIng & gRoovIng

t-Max Q-Cut PartingpARtING BLADEs

tOOL BLOCks FOR t-Max q-Cut & CoroCut




MFG # FOR BLADE

DIMENsIONs

ORDER #ar max bc b21 f1 h h1 h2 h7 I1 I21 I22

151.2 -12-21M 151.2-21-20 1.380" .730" .730" .540" .750" .750" 1.790" .430" 3.150" .200" 2.760" SAN-36669151.2-21-25 1.380" .730" .730" .540" .750" .750" 1.790" .430" 3.150" .200" 2.760"151.2-21-30 1.380" .730" .730" .540" .750" .750" 1.790" .430" 3.150" .200" 2.760"151.2-21-40 1.380" .730" .730" .540" .750" .750" 1.790" .430" 3.150" .200" 2.760"

151.2 -16-25M 151.2-25-25 2.360" .980" .730" .540" 1.000" 1.000" 1.790" .430" 4.720" .200" 4.330" SAN-36672-20-25M 151.2-25-30 2.360" 1.230" .730" .540" 1.250" 1.250" 2.150" .210" 4.720" .200" 4.330" SAN-36670

151.2-25-40 2.360" 1.230" .730" .540" 1.250" 1.250" 2.150" .210" 4.720" .200" 4.330"151.2-25-50 2.360" 1.230" .730" .540" 1.250" 1.250" 2.150" .210" 4.720" .200" 4.330"151.2-25-60 2.360" 1.230" .730" .540" 1.250" 1.250" 2.150" .210" 4.720" .200" 4.330"

MFG #pARtING BLADE

sEAt sIZE

DIMENsIONs

kEYGAuGE INsERt ORDER #ar max h h1 I1

151.2 -21-20 20 1.380" 1.020" .843" 4.330" 5680 057-021 N151.2-200 SAN-36247-21-25 25 1.380" 1.020" .843" 4.330" 5680 057-021 N151.2-250 SAN-36248-25-25 25 2.360" 1.260" .984" 5.910" 5680 057-021 N151.2-250 SAN-36249-21-30 30 1.380" 1.020" .843" 4.330" 5680 057-021 N151.2-300 SAN-36250-25-30 30 2.360" 1.260" .984" 5.910" 5680 057-021 N151.2-300 SAN-36252-21-40 40 1.380" 1.020" .843" 4.330" 5680 057-011 N151.2-400 SAN-36251-25-40 40 2.360" 1.260" .984" 5.910" 5680 057-011 N151.2-400 SAN-36253-25-50 50 2.360" 1.260" .984" 5.910" 5680 057-011 N151.2-500 SAN-36258-25-60 60 2.360" 1.260" .984" 5.910" 5680 057-011 N151.2-600 SAN-36259













CARBIDE CuttIng


CoroCut2the first choice system for all parting, profiling and grooving operations

PARtIng & gRoovIng

hOLDERs

Note! When using CoroCut 2-edged insert, the ar of the insert gives the max depth of cut. Seat size to correspond with seat size on insert. For max stability choose a holder with shortest possible CDX.

Shank toolsScrew clampStandard sizes available

.059" - .315"

Right hand toolholders listed. Lefthandtoolholdersavailable.

Rail-shapeV-shape

Holder

Insert

INsERt GRADEs:Inserts are available in a variety of specially developed grades.• Cementedcarbide• Polycrystallinediamond• Cubicboronnitride

INsERt GEOMEtRIEs:A large variety of geometries are available, dedicated to different applications and feed areas.

tOOLhOLDER AssORtMENt:A wide range of toolholders are available for CoroCut 1- and 2-edge inserts.

INsERt CLAMpING:The system is based on a patented Rail and V-shaped design that counteracts high axial forces from both sides. This, combined with a long insert, gives exceptional stability.

CoroCut sL-FLEXIBLE tOOL sOLutION:WithCoroTurnSLadaptorsandCoroCutSLcutting blades, you can create a large number of tooling solutions, both external and internal from just a limited number of items. Contact our Customer Service Team for details.

INsERt VERsIONs:• Availableinwidthsfrom.059-.315"(1.5-8mm)• UseCoroCut2-edgeforthemosteconomicalmachining• UseCoroCut1-edge(notshown)forcuttingdepthsdeeper

than .787" (20mm)

MFG#DIMENsIONs sEAt

sIZE GAuGE INsERt ORDER #CDX B WF h hF LF OhNRF123 D032-12B .320" .750" .825" .750" .750" 4.500" 1.000" D N123D2-0150-CM SAN-13268

D032-16B .320" 1.000" 1.028" 1.000" 1.000" 5.000" 1.000" D N123D2-0150-CM SAN-13269D059-16B .590" 1.000" 1.028" 1.000" 1.000" 6.000" 1.320" D N123D2-0150-CM SAN-13272E032-12B .320" .750" .827" .750" .750" 4.500" 1.004" E N123E2-0200-CM SAN-15532E032-16B .320" 1.000" 1.024" 1.000" 1.000" 5.000" 1.000" E N123E2-0200-CM SAN-15533E059-16B .590" 1.000" 1.024" 1.000" 1.000" 6.000" 1.319" E N123E2-0200-CM SAN-15579F040-12B .400" .750" .827" .750" .750" 4.500" 1.142" F N123F2-0250-CM SAN-15535F040-16B .400" 1.000" 1.024" 1.000" 1.000" 5.000" 1.142" F N123F2-0250-CM SAN-15536F040-20B .400" 1.250" 1.299" 1.250" 1.250" 6.000" 1.142" F N123F2-0250-CM SAN-15537F079-16B .790" 1.000" 1.024" 1.000" 1.000" 6.000" 1.575" F N123F2-0250-CM SAN-15582F079-20B .790" 1.250" 1.299" 1.250" 1.250" 6.000" 1.575" F N123F2-0250-CM SAN-15583G040-16B .400" 1.000" 1.024" 1.000" 1.000" 5.000" 1.181" G N123G2-0300-CM SAN-15539G040-20B .400" 1.250" 1.299" 1.250" 1.250" 6.000" 1.181" G N123G2-0300-CM SAN-15540G079-16B .790" 1.000" 1.024" 1.000" 1.000" 6.000" 1.614" G N123G2-0300-CM SAN-15585G079-20B .790" 1.250" 1.299" 1.250" 1.250" 6.000" 1.614" G N123G2-0300-CM SAN-15586H051-16BM .510" 1.000" 1.024" 1.000" 1.000" 5.000" 1.338’ H N123H2-0400-CM SAN-19143H051-20BM .510" 1.250" 1.299" 1.250" 1.250" 6.000" 1.338" H N123H2-0400-CM SAN-19144H098-16BM .980" 1.000" 1.024" 1.000" 1.000" 6.000" 1.850" H N123H2-0400-CM SAN-19148H098-20BM .980" 1.250" 1.299" 1.250" 1.250" 6.000" 1.850" H N123H2-0400-CM SAN-19149J051-16BM .510" 1.000" 1.024" 1.000" 1.000" 5.000" 1.338" J N123J2-0500-CM SAN-19156J051-20BM .510" 1.250" 1.299" 1.250" 1.250" 6.000" 1.338" J N123J2-0500-CM SAN-19157J126-16BM 1.260" 1.000" 1.024" 1.000" 1.000" 6.000" 2.244" J N123J2-0500-CM SAN-19165J126-20BM 1.260" 1.250" 1.299" 1.250" 1.250" 6.000" 2.244" J N123J2-0500-CM SAN-19166K063-16BM .630" 1.000" 1.024" 1.000" 1.000" 5.000" 1.535" K N123K2-0600-CR SAN-19169K063-20BM .630" 1.250" 1.299" 1.250" 1.250" 6.000" 1.535" K N123K2-0600-CR SAN-19170L100-16BM 1.000" 1.000" 1.028" 1.000" 1.000" 6.000" 2.000" L N123L2-0800-GM SAN-19181L100-20BM 1.000" 1.250" 1.300" 1.250" 1.250" 6.000" 2.000" L N123L2-0800-GM SAN-19182





























CARBIDE CuttIng

CoroCut2INsERts FOR GROOVING

PARtIng & gRoovIng

P M K S

GROOVING LOW FEED - GF• Sharpcuttingedge• Lowcuttingforcesandgood

surface finish• Tighttolerances

Neutral inserts listed.

Right and left available.

1) To correspond with seat size on holder

Grooving

GROOVING MEDIuM FEED - GM• Outstandingchipcontrol• Reduceschipwidthgivinggood

surface finish on component





1-866-999-3117.

P1) To correspond with seat size on holder


FEEDsEAt sIZE 1) MFG #

DIMENsIONs GRADE GC1125

ORDER #CW RE CDX

LOW

Grooving in good conditionsD N123D2-0150-0001-GF .059" .004" .524" SAN-39508E N123E2-0200-0002-GF .079" .008" .756" SAN-39534

N123E2-0200-0004-GF .079" .016" .756" SAN-39538N123E2-0224-0002-GF .088" .008" .756" SAN-39583

F N123F2-0239-0002-GF .94" .008" .756" SAN-39590N123F2-0239-0004-GF .094" .016" .756" SAN-39592

G N123G2-0300-0002-GF .118" .008" .756" SAN-39655N123G2-0300-0004-GF .118" .016" .756" SAN-39659N123G2-0318-0002-GF .125" .008" .756" SAN-39689N123G2-0318-0004-GF .125" .016" .756" SAN-39692

H N123H2-0400-0002-GF .157" .008" .961" SAN-39717N123H2-0400-0004-GF .157" .016" .961" SAN-39740N123H2-0475-0004-GF .187" .016" .961" SAN-39764N123H2-0475-0008-GF .187" .032" .961" SAN-39790N123H2-0500-0002-GF .197" .008" .961" SAN-39813N123H2-0500-0004-GF .197" .016" .961" SAN-39814

K N123K2-0600-0002-GF .236" .008" .961" SAN-39833N123K2-0635-0004-GF .250" .016" .961" SAN-39840N123K2-0635-0005-GF .250" .020" .961" SAN-39841N123K2-0635-0008-GF .250" .032" .961" SAN-39842

L N123L2-0792-0008-GF .312" .032" 1.142" SAN-39847N123L2-0800-0002-GF .315" .008" 1.165" SAN-39850

For Circlip groovesE N123E2-0185-0001-GF .073" .004" .760" SAN-39523

N123E2-0215-0001-GF .085" .004" .760" SAN-39540F N123F2-0265-0002-GF .104" .008" .756" SAN-39597G N123G2-0315-0002-GF .124" .008" .756" SAN-39684H N123H2-0415-0002-GF .163" .008" .961" SAN-39744J N123J2-0515-0002-GF .203" .008" .961" SAN-39825

FEEDsEAt sIZE 1) MFG #

DIMENsIONsGRADE ORDER #CW RE CDX

MED

IUM

Grooving in average conditionsE N123E2-0200-0002-GM .079" .008" .740" GC4225 SAN-34873

N123E2-0200-0002-GM .079" .008" .740" GC1125 SAN-39535N123E2-0239-0002-GM .094" .008" .724" GC4225 SAN-34874N123E2-0239-0002-GM .094" .008" .724" GC1125 SAN-39587

G N123G2-0300-0003-GM .118" .012" .717" GC4225 SAN-34891N123G2-0300-0003-GM .118" .012" .717" GC1125 SAN-39657N123G2-0318-0003-GM .125" .012" .709" GC4225 SAN-34906N123G2-0318-0003-GM .125" .012" .709" GC1125 SAN-39691

H N123H2-0400-0003-GM .157" .012" .906" GC4225 SAN-34925N123H2-0400-0003-GM .157" .012" .906" GC1125 SAN-39736

J N123J2-0475-0003-GM .187" .012" .890" GC4225 SAN-34939N123J2-0475-0003-GM .187" .012" .890" GC1125 SAN-39818N123J2-0500-0004-GM .197" .016" .902" GC4225 SAN-34941N123J2-0500-0004-GM .197" .016" .902" GC1125 SAN-39821

K N123K2-0600-0004-GM .236" .016" .894" GC4225 SAN-34951N123K2-0600-0004-GM .236" .016" .894" GC1125 SAN-39835N123K2-0635-0003-GM .250" .012" .890" GC4225 SAN-34956N123K2-0635-0003-GM .250" .012" .890" GC1125 SAN-39839

L N123L2-0792-0003-GM .312" .012" 1.130" GC4225 SAN-34959N123L2-0800-0005-GM .315" .020" 1.18" GC4225 SAN-34963

















































Carbide Cutting


CoroCut2Parting & grooving

INsERts FOR PROFILINg

Profiling


P1) To correspond with seat size on holder

CoroCut PartingINsERts

TolerancesCW = + .004"RE = + .004"

1) To correspond with seat size on holder

-CR-CF -CM

P M K n S H

Neutral inserts listed. Right and left available.

gEOmEtRy -CF - thE LOw FEED ChOICEVery good chip control and a very soft cutting action. Works well in stainless steels and sticky materials. Wiper technology.gEOmEtRy -Cm - thE mEDIum FEED ChOICELow cutting forces resulting in stable cuts. Recommended for thin walled tubes and small diameter components in all materials.gEOmEtRy -CR - thE hIgh FEED ChOICEStrong cutting edges. Excellent for interrupted cuts and tough demanding operations in all materials.

DOubLE ENDED PaRtINg bLaDEs FOR tOOL bLOCksNOTE: When using CoroCut 2-edged insert, the ar of the insert gives the maximum depth of cut.

Aluminum

-RM-AM

PROFILINg mEDIum FEED• Excellentforprofilinginallmaterials• Outstandingchipcontrol• Goodsurfacefinish

mFg #sEat sIZE

DImENsIONs

kEygaugE INsERt ORDER #ar max h h1 I1

N123F55-25A2 F 2.165" 1.256" .984" 5.906" 5680 058-02 N123F2-CR SAN-13481N123G55-25A2 G 2.165" 1.256" .984" 5.906" 5680 058-02 N123G2-CR SAN-13482N123H55-25A2 H 2.165" 1.256" .984" 5.906" 5680 058-02 N123H2-CR SAN-13483

FEEDsEat sIZE 1) mFg # gRaDE

DImENsIONsORDER #Cw PsIRR RE CDX

LOW

G N123G2-0300-0001-CF GC1125 .118" 0o .004" .724" SAN-39652N123G2-0300-0001-CF GC2135 .118" 0o .004" .724" SAN-15922

H N123H2-0400-0001-CF GC1125 .157" 0o .006" .917" SAN-39708N123H2-0400-0001-CF GC2135 .157" 0o .006" .917" SAN-15926

MED

IUM

E N123E2-0200-0002-CM GC1125 .079" 0o .008" .748" SAN-39532N123E2-0200-0002-CM GC2135 .079" 0o .008" .748" SAN-15930

G N123G2-0300-0002-CM GC1125 .118" 0o .008" .744" SAN-39654N123G2-0300-0002-CM GC2135 .118" 0o .008" .744" SAN-15938

H N123H2-0400-0002-CM GC1125 .157" 0o .008" .949" SAN-39709N123H2-0400-0002-CM GC2135 .157" 0o .008" .949" SAN-15951

HIGH

G N123G2-0300-0003-CR GC1125 .118" 0o .012" .740" SAN-39656N123G2-0300-0003-CR GC2135 .118" 0o .012" .740" SAN-15958

H N123H2-0400-0003-CR GC1125 .157" 0o .012" .933" SAN-39726N123H2-0400-0003-CR GC2135 .157" 0o .012" .933" SAN-15962

FEEDsEat sIZE 1) mFg #

DImENsIONsgRaDE ORDER #Cw RE CDX

MED

IUM

Profiling in average conditionsF N123F2-0300-RM .118” .059” .732” GC1125 SAN-34882

N123F2-0300-RM .118” .059” .732” H13A SAN-04249H N123H2-0400-RM .157” .079” .909” H13A SAN-12541

N123H2-0400-RM .157” .079” .909” GC1125 SAN-34931J N123J2-0600-RM .236” .118” .874” H13A SAN-04253

N123J2-0600-RM .236” .118” .874” GC1125 SAN-34949L N123L2-0800-RM .315” .157” 1.063” GC1125 SAN-34961

Profiling for aluminumJ N123J2-0600-AM .236” .118” .874” GC1005 SAN-34946



























CARBIDE CuttIng

Carbide Insert gradesPARtIng & gRoovIng

The CoroCut Family

stEEL, CAst stEEL, LONG ChIppING MALLEABLE IRONGC4225An all-purpose CVD-coated grade with an excellent combination of high wear resistance and good edge security. First choice for grooving and turning operations under stable conditions. Medium to high cutting speeds.

GC1125An excellent general purpose grade. First choice for parting off tubes in steel. Also very good in grooving and turning operations. This new PVD coated grade works very well in low carbon steel and other smearing materials. Speeds and feeds from medium to low.

GC2135A CVD coated carbide grade for toughness demanding operations such as cut-off to centre and interrupted cuts. Backup alternative when grooving and turning. Very good bulk and edgeline toughness. To be used at low to medium cutting speeds.

GC235Parting and grooving of steel in operations requiring toughness. Suitable for low speeds and under unfavorable conditions.h13ACombines good abrasive wear resistance and toughness for grooving of heat resistant steels and titanium alloys.

AustENItIC/FERRItIC/MARtENsItIC stAINLEss stEELGC4125An excellent all-purpose PVD coated grade with a combination of high wear resistance and good edge security for stainless steels. First choice for grooving and turning operations. Also good for parting off, especially tubes. Medium to low cutting speeds.

GC2135First choice CVD coated carbide grade for parting off in stainless steel and other toughness demanding operations. Very good bulk and edgeline toughness. To be used at medium to low cutting speeds.

GC235Parting and grooving of stainless steels where toughness is required. Use at low speeds and under unfavorable conditions.

CAst IRON, ChILLED CAst IRON, shORt ChIppING MALLEABLE IRONGC3115A very high wear resistant CVD coated grade for high cutting speeds in grooving and turning under good conditions. Due to its excellent hot hardness, also effective on hard cast iron.

GC4225An all-purpose CVD coated grade with an excellent combination of high wear resistance and good edge security. To be used in grooving and turning operations at medium to high cutting speeds. Also good in parting off tubes.

CARBIDE CuttIng


tHREADIngCorothread 266ultra rigid thread turningFor all types of threadsInsert sizes: 16mm, 22mm and 27mm (3/8", 1/2" and 5/8")

EXtERNAL shANk tOOLsScrew clamp design

Corothread 266 Holders

Corothread 266 Capto HoldersEXtERNAL CAptO CuttING uNItsScrew clamp design

Easy clamping of new inserts on rail guide.

Full profile - for high productivity

V-profile - for minimum tool inventory

Multi-point - for economic threading in mass production




1-866-999-3117.

MFG # iCDIMENsIONs

ORDER #B WF h hF LF Lh266RFG -123B 3/8" .750" 1.000" .750" .750" 4.500" .870" SAN-49325

163D 3/8" 1.000" 1.250" 1.000" 1.000" 6.000" .870" SAN-49327-203D 3/8" 1.250" 1.500" 1.250" 1.250" 6.000" .870" SAN-49329-164D 1/2" 1.000" 1.250" 1.000" 1.000" 6.000" 1.272" SAN-41761-204D 1/2" 1.250" 1.500" 1.250" 1.250" 6.000" 1.272" SAN-41762-244E 1/2" 1.500" 2.000" 1.500" 1.500" 7.000" 1.193" SAN-42839

266LFG -123B 3/8" .750" 1.000" .750" .750" 4.500" .870" SAN-49256163D 3/8" 1.000" 1.250" 1.000" 1.000" 6.000" .870" SAN-49258-203D 3/8" 1.250" 1.500" 1.250" 1.250" 6.000" .870" SAN-49260-164D 1/2" 1.000" 1.250" 1.000" 1.000" 6.000" 1.272" SAN-42782-204D 1/2" 1.250" 1.500" 1.250" 1.250" 6.000" 1.272" SAN-42783-244E 1/2" 1.500" 2.000" 1.500" 1.500" 7.000" 1.193" SAN-42785

MFG # iCCAptO sIZE

DIMENsIONs

ORDER #D5m f1 l1

266RFG -22040-16 3/8" C3 1.260" .866" 1.575" SAN-48598-27050-16 3/8" C4 1.575" 1.063" 1.968" SAN-48607-35060-16 3/8" C5 1.968" 1.378" 2.362" SAN-48615-45065-16 3/8" C6 2.480" 1.772" 2.559" SAN-48627-55080-16 3/8" C8 3.150" 2.165" 3.150" SAN-50561-22040-22 1/2" C3 1.260" .866" 1.575" SAN-42047-27050-22 1/2" C4 1.575" 1.063" 1.968" SAN-42065-35060-22 1/2" C5 1.968" 1.378" 2.362" SAN-42082-45065-22 1/2" C6 2.480" 1.772" 2.559" SAN-41769-55080-22 1/2" C8 3.150" 2.165" 3.150" SAN-42107-45065-27 5/8" C6 2.480" 1.772" 2.559" SAN-42102

266LFG -22040-16 3/8" C3 1.260" .866" 1.575" SAN-48596-27050-16 3/8" C4 1.575" 1.063" 1.968" SAN-48604-35060-16 3/8" C5 1.968" 1.378" 2.362" SAN-48613-45065-16 3/8" C6 2.480" 1.772" 2.559" SAN-48625-55080-16 3/8" C8 3.150" 2.165" 3.150" SAN-50558-22040-22 1/2" C3 1.260" .866" 1.575" SAN-42047-27050-22 1/2" C4 1.575" 1.063" 1.968" SAN-42063-35060-22 1/2" C5 1.968" 1.378" 2.362" SAN-42079-45065-22 1/2" C6 2.480" 1.772" 2.559" SAN-42097-55080-22 1/2" C8 3.150" 2.165" 3.150" SAN-42106-45065-27 5/8" C6 2.480" 1.772" 2.559" SAN-42098




































CARBIDE CuttIngtHREADIng

BORING BARsScrew clamp design

Cylindrical with flat

Corothread 266 Holders

Corothread 266 Capto HoldersINtERNAL CAptO CuttING uNItsScrew clamp design

V-pROFILE 60o, NON-tOppINGThreads for general usage

Corothread 266 Inserts Minimum order 2

CuttING EDGE CONDItION:A = Edge rounded (ER)F = Sharp cutting edgeC = Chip forming geometry

MFG # IC

DIMENsIONs

ORDER #dmm Dmmin f1 l1 l3 γno

266RKF -D10-3 3/8" .625" .790" .472" 8.000" 1.050" -15 SAN-54687-D12-3 3/8" .750" .980" .551" 10.000" 1.140" -15 SAN-49457-D16-3 3/8" 1.000" 1.260" .669" 12.000" 1.140" -15 SAN-49458-D20-3 3/8" 1.250" 1.580" .866" 14.000" 1.220" -15 SAN-49459-D24-3 3/8" 1.500" 1.970" 1.063" 15.000" 1.260" -15 SAN-49460-D32-3 3/8" 2.000" 2.480" 1.378" 16.000" 1.580" -15 SAN-49461-D20-4 1/2" 1.250" 1.580" .866" 14.000" 1.742" -15 SAN-41765-D24-4 1/2" 1.500" 1.970" 1.063" 15.000" 2.012" -15 SAN-41766-D32-4 1/2" 2.000" 2.480" 1.378" 16.000" 2.059" -15 SAN-42898

266LKF -D10-3 3/8" .625" .790" .472" 8.000" 1.050" -15 SAN-56233-D12-3 3/8" .750" .980" .551" 10.000" 1.140" -15 SAN-49291-D16-3 3/8" 1.000" 1.260" .669" 12.000" 1.140" -15 SAN-49292-D20-3 3/8" 1.250" 1.580" .866" 14.000" 1.220" -15 SAN-49293-D24-3 3/8" 1.500" 1.970" 1.063" 15.000" 1.260" -15 SAN-49294-D32-3 3/8" 2.000" 2.480" 1.378" 16.000" 1.580" -15 SAN-49295-D20-4 1/2" 1.250" 1.580" .866" 14.000" 1.742" -15 SAN-42813-D24-4 1/2" 1.500" 1.970" 1.063" 15.000" 2.012" -15 SAN-42814-D32-4 1/2" 2.000" 2.480" 1.378" 16.000" 2.059" -15 SAN-42815

MFG # IC CAptO sIZE

DIMENsIONs

ORDER #D1 D5m f1 l1 l3

C5-266RKF-27105-16 3/8" C5 40mm 50mm 27mm 105mm 84mm SAN-50508C6-266RKF-27105-16 3/8" C6 40mm 50mm 27mm 105mm 80mm SAN-48628C5-266LKF-27105-16 3/8" C5 40mm 50mm 27mm 105mm 84mm SAN-52916C6-266LKF-27105-16 3/8" C6 40mm 50mm 27mm 105mm 80mm SAN-48626C5-266RKF-27105-22 1/2" C5 40mm 50mm 26.9mm 105mm 84mm SAN-42084C6-266RKF-27105-22 1/2" C6 40mm 63mm 26.9mm 105mm 80mm SAN-42105C5-266LKF-27105-22 1/2" C5 40mm 50mm 26.9mm 105mm 84mm SAN-42081C6-266LKF-27105-22 1/2" C6 40mm 63mm 26.9mm 105mm 80mm SAN-42101

MFG # IC GRADEpItCh

tpI

DIMENsIONs

ORDER #hA hB REExternal266RG -16VM01A001M 3/8" GC1125 24-12 .0661" .0055" .0051" SAN-49438

-16VM01C001M 3/8" GC1125 24-12 .0661" .0055" .0051" SAN-53795-16VM01F001E 3/8" GC1135 24-12 .0661" .0055" .0051" SAN-52399-16VM01A002M 3/8" GC1125 16-8 .1039" .0079" .0079" SAN-49452-16VM01C002M 3/8" GC1125 16-8 .1039" .0079" .0079" SAN-53796-16VM01F002E 3/8" GC1135 16-8 .1039" .0079" .0079" SAN-52400-22VM01A001M 1/2" GC1125 7-4 .1937" .0189" .0189" SAN-42880-22VM01F001E 1/2" GC1020 7-4 .1937" .0189" .0189" SAN-42882

Internal266RL -16VM01A001M 3/8" GC1125 24-12 .0571" .0024" .0024" SAN-49495

-16VM01C001M 3/8" GC1135 24-12 .0571" .0024" .0024" SAN-53828-16VM01F001E 3/8" GC1135 24-12 .0571" .0024" .0024" SAN-52499-16VM01A002M 3/8" GC1125 16-8 .1000" .0035" .0035" SAN-49496-16VM01C002M 3/8" GC1135 16-8 .1000" .0035" .0035" SAN-53829-16VM01F002E 3/8" GC1135 16-8 .1000" .0035" .0035" SAN-52500-22VM01A001M 1/2" GC1125 7-4 .1713" .0102" .0102" SAN-42933-22VM01F001E 1/2" GC1020 7-4 .1713" .0102" .0102" SAN-42935











































CARBIDE CuttIng


ISO 965-1980Tolerance class 6

Minimum order 2

ISO 5864-1978Tolerance class 2B, intTolerance class 2A, ext Minimum order 2

tHREADIng

MEtRIC 60o, tOppINGThreads for general usage

Corothread 266 Inserts

uN 60o, tOppINGThreads for general usage in all segments of engineering industry




1-866-999-3117.

MFG # IC GRADEpItCh

tpIDIMENsIONs

ORDER #hA hBExternal266RG -16MM01A050M 3/8" GC1125 .50mm .0146" .0031" SAN-49339

-16MM01A075M 3/8" GC1125 .75mm .2200" .0043" SAN-49342-16MM01A100M 3/8" GC1125 1.00mm .0295" .0059" SAN-49362-16MM01A150M 3/8" GC1125 1.50mm .0441" .0087" SAN-49386-16MM01A200M 3/8" GC1125 2.00mm .0591" .0114" SAN-49388-16MM01A250M 3/8" GC1125 2.50mm .0736" .0142" SAN-49389-16MM01A300M 3/8" GC1125 3.00mm .0886" .0165" SAN-49390-22MM01A350M 1/2" GC1020 3.50mm .1031" .0193" SAN-42852-22MM01A400M 1/2" GC1020 4.00mm .1181" .0220" SAN-42854-22MM01A450M 1/2" GC1020 4.50mm .1327" .0248" SAN-42856-22MM01A500M 1/2" GC1020 5.00mm .1480" .0280" SAN-42858-22MM01A600M 1/2" GC1020 6.00mm .1776" .0339" SAN-42860

Internal266RL -16MM01A050M 3/8" GC1125 .50mm .0126" .0012" SAN-49467

-16MM01A075M 3/8" GC1125 .75mm .0185" .0016" SAN-49468-16MM01A100M 3/8" GC1125 1.00mm .0252" .0024" SAN-49469-16MM01A150M 3/8" GC1125 1.50mm .0378" .0035" SAN-49471-16MM01A175M 3/8" GC1125 1.75mm .0516" .0098" SAN-49472-16MM01A200M 3/8" GC1125 2.00mm .0500" .0047" SAN-49473-16MM01A250M 3/8" GC1125 2.50mm .0626" .0063" SAN-49474-16MM01A300M 3/8" GC1125 3.00mm .0756" .0075" SAN-49475-22MM01A350M 1/2" GC1020 3.50mm .0882" .0102" SAN-42907-22MM01A400M 1/2" GC1020 4.00mm .1008" .0118" SAN-42909-22MM01A450M 1/2" GC1020 4.50mm .1138" .0130" SAN-42911-22MM01A500M 1/2" GC1020 5.00mm .1264" .0150" SAN-42913-22MM01A600M 1/2" GC1020 6.00mm .1520" .0185" SAN-42915

MFG # IC GRADEpItCh

tpIDIMENsIONs

ORDER #hA hBExternal266RG -16UN01A320M 3/8" GC1125 32 .0232" .0039" SAN-50577

-16UN01A240M 3/8" GC1125 24 .0311" .0055" SAN-50573-16UN01A200M 3/8" GC1125 20 .0374" .0063" SAN-49434-16UN01A180M 3/8" GC1125 18 .0413" .0071" SAN-49432-16UN01A160M 3/8" GC1125 16 .0469" .0079" SAN-49431-16UN01A140M 3/8" GC1125 14 .0531" .0091" SAN-49430-16UN01A130M 3/8" GC1125 13 .0575" .0098" SAN-52369-16UN01A120M 3/8" GC1125 12 .0622" .0110" SAN-49419-16UN01A110M 3/8" GC1125 11 .0677" .0118" SAN-52366-16UN01A100M 3/8" GC1125 10 .0748" .1013" SAN-52364-16UN01A090M 3/8" GC1125 9 .0831" .0146" SAN-52363-16UN01A080M 3/8" GC1125 8 .0937" .0161" SAN-50570-22UN01A070M 1/2" GC1020 7 .1063" .0193" SAN-44871-22UN01A060M 1/2" GC1020 6 .1244" .0224" SAN-44846-22UN01A050M 1/2" GC1020 5 .1500" .0272" SAN-42879-22UN01A045M 1/2" GC1020 4.5 .1665" .0303" SAN-42878-22UN01A040M 1/2" GC1020 4 .1874" .0343" SAN-42877

Internal266RL -16UN01A320M 3/8" GC1125 32 .0197" .0016" SAN-54700

-16UN01A240M 3/8" GC1125 24 .0264" .0024" SAN-54698-16UN01A200M 3/8" GC1125 20 .0315" .0028" SAN-52493-16UN01A180M 3/8" GC1125 18 .0350" .0031" SAN-49493-16UN01A160M 3/8" GC1125 16 .0394" .0035" SAN-49492-16UN01A140M 3/8" GC1125 14 .0445" .0043" SAN-49491-16UN01A120M 3/8" GC1125 12 .0524" .0051" SAN-49490-16UN01A110M 3/8" GC1125 11 .0571" .0055" SAN-52487-16UN01A100M 3/8" GC1125 10 .0626" .0063" SAN-52485-16UN01A080M 3/8" GC1125 8 .0787" .0079" SAN-50584-16UN01A070M 1/2" GC1020 7 .0909" .0102" SAN-44952-16UN01A060M 1/2" GC1020 6 .1063" .0126" SAN-44949-22UN01A050M 1/2" GC1020 5 .1280" .0150" SAN-42932-22UN01A045M 1/2" GC1020 4.5 .1428" .0161" SAN-42931-22UN01A040M 1/2" GC1020 4 .1606" .0193" SAN-42930




























































ACME 29o, ChAMFERED CREst FORMCorothread 266 Inserts

ANSI B1.5-1988Tolerance class 2G

stuB-ACME 29o, ChAMFERED CREst FORM

ApI ROuND 60o, tOppINGThreads for oil and gas

API spec 5B

Minimum order 2

Npt 60o

Threads for pipe fittings and couplings for gas, water and sewage

ANSI B.1.20-1-1983

Minimum order 2

Trapezodial screw threads for motion transmission

ANSI B.1.20-1-1983

Trapezodial screw threads for motion transmission

Minimum order 2

Minimum order 2

MFG # IC GRADEpItCh

tpIDIMENsIONs

ORDER #hA hBExternal266RG -16RD01A100E 3/8" GC1125 10 .0693" .0142" SAN-49418

-16RD01A080E 3/8" GC1125 8 .0878" .0169" SAN-49417-22RD01A100E 1/2" GC1125 10 .0693" .0142" SAN-42868-22RD01A080E 1/2" GC1125 8 .0878" .0169" SAN-41774

Internal266RL -16RD01A100E 3/8" GC1125 10 .0693" .0142" SAN-49489

-16RD01A080E 3/8" GC1125 8 .0882" .0169" SAN-49488-22RD01A100E 1/2" GC1125 10 .0693" .0142" SAN-49492-22RD01A080E 1/2" GC1125 8 .0878" .0169" SAN-41756

MFG # IC GRADEpItCh

tpIDIMENsIONs

ORDER #hA hBExternal266RG -16NT01A270M 3/8" GC1125 27 .0299" .0020" SAN-52332

-16NT01A180M 3/8" GC1125 18 .0449" .0031" SAN-49411-16NT01A140M 3/8" GC1125 14 .0575" .0035" SAN-49410-16NT01A115M 3/8" GC1125 11.5 .0705" .0043" SAN-49409-16NT01A080M 3/8" GC1125 8 .1012" .0055" SAN-52310

Internal266RL -16NT01A140M 3/8" GC1125 14 .0575" .0035" SAN-49482

-16NT01A115M 3/8" GC1125 11.5 .0705" .0043" SAN-49481-16NT01A080M 3/8" GC1125 8 .1012" .0055" SAN-52469

MFG # IC GRADEpItCh

tpIDIMENsIONs

ORDER #hA hB CFExternal266RG -16SA01F160E 3/8" GC1135 16 .0732" .0476" .0248" SAN-53787

-16SA01F100E 3/8" GC1135 10 .1161" .0736" .0382" SAN-52347-16SA01F080E 3/8" GC1135 8 .1445" .0941" .0488" SAN-52346-22SA01F060E 1/2" GC1020 6 .1913" .1287" .066" SAN-41749-22SA01F040E 1/2" GC1020 4 .2862" .1988" .1028" SAN-42871-27SA01F030E 5/8" GC1020 3 .3803 .2681" .1386" SAN-42896

Internal266RL -16SA01F160E 3/8" GC1135 16 .0713" .0453" .0232" SAN-54697

-16SA01F100E 3/8" GC1135 10 .1134" .0709" .0366" SAN-52479-16SA01F080E 3/8" GC1135 8 .1413" .0909" .0488" SAN-52478-22SA01F060E 1/2" GC1020 6 .1878" .1252" .0646" SAN-41757-22SA01F040E 1/2" GC1020 4 .2807" .1933" .1000" SAN-42924-27SA01F030E 5/8" GC1020 3 .3736" .2614" .1350" SAN-42949

MFG # IC GRADEpItCh

tpIDIMENsIONs

ORDER #hA hB CFExternal266RG -16AC01F160E 3/8" GC1135 16 .0780" .0409" .0213" SAN-53769

-16AC01F100E 3/8" GC1135 10 .1244" .0634" .0327" SAN-52290-16AC01F080E 3/8" GC1135 8 .1551" .0819" .0425" SAN-52289-22AC01F060E 1/2" GC1020 6 .2067" .1118" .0579" SAN-41770-22AC01F040E 1/2" GC1020 4 .3098" .1736" .0898" SAN-42848-27AC01F030E 5/8" GC1020 3 .4122" .2343" .1213" SAN-42895

Internal266RL -16AC01F160E 3/8" GC1135 16 .0776" .0394" .0205" SAN-54695

-16AC01F100E 3/8" GC1135 10 .1232" .0606" .0315" SAN-52451-16AC01F080E 3/8" GC1135 8 .1535" .0787" .0406" SAN-52450-22AC01F060E 1/2" GC1020 6 .2043 .1087" .0563" SAN-41752-22AC01F040E 1/2" GC1020 4 .3059" .1685" .0870" SAN-42903-27AC01F030E 5/8" GC1020 3 .4059" .2283" .1181" SAN-42948











































Selecting the u-lock Insert geometrystANDARD GEOMEtRYGEOMEtRY -Rounded (ER treated) Cutting Edge

Indicated by a dash (-) in the ordering code.

• Firstchoiceinmostoperationsandmaterials• Goodchipforming• Goodedgesecurity• Fewpassesrequired

stANDARD GEOMEtRYGEOMEtRY FSharp Cutting Edge

Indicated by an “F” in the ordering code.

• Cleancutsinstickyorworkhardeningmaterials

• Reducedcuttingforcesandgoodsurfacefinishes

• Lessbuilt-upedge

GEOMEtRY CChip Breaking Geometry

Indicated by a “C” in the ordering code.

• Formaximumchipcontrolandminimumsupervision

• Anoptimizerforlowcarbonandlowalloysteels

• Tobeusedwithmodifiedflankinfeedonly

Selecting the u-lock Insert gradeGRADE GC2125PVD-coated grade with very good wear resistance for various steel threadings. To be used at high cutting speeds and long cutting times.

GRADE GC1020Has been specially developed for threading operations in most materials and particularly recommended for use in stainless and low carbon steels. Combined with the sharp F-geometry it is a good choice for duplex steels, heat resistant and titanium alloys.

GRADE GC1135Good all-purpose PVD-coated grade with good wear resistance and edge line toughness for various steel threadings. To be used at medium cutting speeds.

Insert typesFuLL pROFILE INsERtsFor high productivity in threading.

V-pROFILE INsERtsFor threading with minimum tool inventory. These inserts do not top the crests and therefore the outer diameters for screws and inner diameter for nuts must be turned to the right diameter prior to threading.

MuLtI-pOINt INsERtsFor high productive economic threading in mass production. These inserts are the most

commonly used. They form a complete thread profile including the crest.• Correctdepth,bottom

and top radii are ensured and hence a stronger thread

• Blankdoesnotneedtobeturnedtoexactdiameter prior to threading and no deburring needed after threading

• Toppingshouldbe.0012"-.0028"• Aseparateinsertisrequiredforeachpitch

and profile

• Thesameinsertcanbeusedforarangeofpitches provided that the thread angle is the same

• Fewerinsertsneedtobestocked• Thenoseradiuschosenfortheinsertisthat

of the smallest pitch

Similar to the full profile inserts but with a thread chasing design.• Fewerpassesrequired

giving longer tool life, greater productivity and lower tool costs

• Theincreaseinproductivityperinsertistwicefor a two pointed and three times for a three pointed

• Longerpassesrequiredbeyondworkpiecethread to accommodated the extra points

• Conditionsmustbeextrastablebecauseoflonger cutting edge and greater loads

• Onlyavailableinthemostpopularprofilesandpitches

• Specialinfeedrecommendationsmustbefollowed


CARBIDE CuttIngtHREADIng & gRoovIng

EXtERNALtop-lok Holders

TLSR/L TLSR/L-S

f1 dimension qualified over sharp point of insert

spARE pARts

tOOL tYpE

INsERt sIZE

CLAMp

RIGht hAND ORDER # LEFt hAND ORDER #TLSR/L 2 C2R SAN-40791 C2L SAN-40790

3 C3R SAN-40789 C3L SAN-407884 C4R SAN-40787 C4L SAN-40786

MFG#INsERt

sIZEGAuGE INsERt

DIMENsIONs

ORDER #ar b f1 h h1 l1 l3

TLSR -122B 2 TLG2 .125" .750" 1.000" .750" .750" 4.500" .880" SAN-8502982D-S 2 TLG2 .125" .500" .500" .500" .500" 6.000" .880" SAN-05432-123B 3 TLG3 .180" .750" 1.000" .750" .750" 4.500" 1.300" SAN-85035103D-S 3 TLG3 .180" .625" .625" .625" .625" 6.000" .880" SAN-15438123D-S 3 TLG3 .180" .750" .750" .750" .750" 6.000" 1.300" SAN-15440-163D 3 TLG3 .180" 1.000" 1.250" 1.000" 1.000" 6.000" 1.300" SAN-85037-164D 4 TLG4 .280" 1.000" 1.250" 1.000" 1.000" 6.000" 1.400" SAN-85045-204D 4 TLG4 .280" 1.250" 1.500" 1.250" 1.250" 6.000" 1.400" SAN-85053

INtERNALCTLHOR

Steel shank

grooving Head with Coroturn Sl CouplingtOp-LOk INtERNAL MAChININGTLER/L

Clamp design

spARE pARts

MFG#INsERt

sIZEGAuGE INsERt

COupLING sIZE

DIMENsIONs

ORDER #DMM DMIN f1

570C-TLER -25-2 2 TLG2 25mm .980" 1.340" .669" SAN-00091L-32-3 3 TLG3 32mm 1.260" 1.730" .866" SAN-00664-40-3 3 TLG3 40mm 1.580" 2.210" 1.102" SAN-00666

tOOL tYpE

INsERt sIZE

CLAMp

RIGht hAND ORDER # LEFt hAND ORDER #TLER/L 2 C2L SAN-40790 C2R SAN-40791

3 C3L SAN-40788 C3R SAN-407894 C4L SAN-40786 C4R SAN-40787

spARE pARts

MFG#INsERt

sIZEGAuGE INsERt

DIMENsIONs

ORDER #DMM DMIN f1 l1

SI-CTLHOR -06102 2 TLG2 .750" 1.130" .562" 10.000" SAN-86019-08122 2 TLG2 1.000" 1.380" .688" 12.000" SAN-86021-08123 3 TLG3 1.000" 1.380" .688" 12.000" SAN-86031-10143 3 TLG3 1.250" 1.750" .875" 14.000" SAN-86029-12143 3 TLG3 1.500" 2.000" 1.000" 14.000" SAN-86027-16163 3 TLG3 2.000" 2.500" 1.250" 16.000" SAN-86025-14144 4 TLG3 1.750" 2.250" 1.125" 14.000" SAN-86022-16164 4 TLG4 2.000" 2.750" 1.375" 16.000" SAN-86023

tOOL tYpEINsERt

sIZECLAMp

RIGht hAND ORDER # LEFt hAND ORDER #SI-CTLHOR/L 2 C2L SAN-40790 C2R SAN-40791

3 C3L SAN-40788 C3R SAN-407894 C4L SAN-40786 C4R SAN-40787









































CARBIDE CuttIng


tHREADIng & gRoovIng

top-lok InsertsTLTP

tOp-LOk 60o pROFILE INsERtsTLTF TLTK

Complementary systems with grooving and profiling geometriesApplication

External grooving

profiling

Internal grooving

Medium feedLow feed

MFG #

DIMENsIONsGRADE GC1125

ORDER #s l11) rε iW

TLTP2R .219" .266" .003 - .005" .150" SAN-44515TLTP3004R .344" .399" .003 - .005" .195" SAN-52220

TLTP3R .344" .399" .005 - .008" .195" SAN-20292TLTP2L .219" .266" .003 - .005" .150" SAN-44512

TLTP3004L .344" .399" .003 - .005" .195" SAN-52219TLTP3L .344" .399" .005 - .008" .195" SAN-20291TLTP4R .453" .630" .005 - .008" .255" SAN-20296TLTP4L .453" .630" .005 - .008" .255" SAN-20295TLTF2R .219" .266" .002 - .004" .150" SAN-54619TLTF3R .344" .402" .002 - .004" .195" SAN-44509TLTF2L .219" .266" .002 - .004" .150" SAN-54618TLTF3L .344" .402" .002 - .004" .195" SAN-54620TLTK2R .219" .266" .002 - .004" .150" SAN-44510TLTK3R .344" .402" .002 - .004" .195" SAN-44511TLTK2L .219" .266" .002 - .004" .150" SAN-54621TLTK3L .344" .402" .002 - .004" .195" SAN-54622

top-lok ClampingTheTop-Lokclampingsystemisdesignedtolocktheinsertsagainst both the back and side of the pocket, providing clamping integrity axially and radially.

GROOVING INsERts

TLG TLGP TLR

thREADING INsERts

TLTFTLTP TLTK

ThiscombinationmakesTop-Lokthestrongestmulti-functionalthreadingandgroovingsystemonthemarkettoday.• Precisiongroundinserts• Interchangeablewithsimilarclampingsystems• Doubleendedinsertsprovidemaximumedgesecurity

INsERt GRADEsGC1125An excellent general purpose grade. First choice for parting off tubes in steel. Also very good in grooving and turning applications. This new PVD coated grade works very well in low carbon steel and other smearing materials. Speeds and feeds from medium to low.




















CARBIDE CuttIng

TLGP

TLG

tHREADIng & gRoovIngtop-lok InsertstOp-LOk GROOVING INsERts

TLR




MFG #

INsERt sIZE


ORDER #s ar rε iW la

ExternalTLG2031R 2 .219" .050" .050" .150" .031" SAN-44418TLG2047R 2 .219" .050" .050" .150" .047" SAN-44420TLG2062R 2 .219" .110" .130" .150" .062" SAN-44424TLG3047R 3 .344" .075" .005" .195" .047" SAN-44430TLG3062R 3 .344" .094" .010" .195" .062" SAN-44432TLG3072R 3 .344" .094" .010" .195" .072" SAN-44434TLG3078R 3 .344" .094" .010" .195" .078" SAN-44436TLG3088R 3 .344" .094" .010" .195" .088" SAN-44438TLG3094R 3 .344" .150" .010" .195" .094" SAN-44440TLG3110R 3 .344" .150" .010" .195" .110" SAN-44444TLG3125R 3 .344" .150" .010" .195" .125" SAN-44448TLG3156R 3 .344" .150" .010" .195" .156" SAN-44452TLG3189R 3 .344" .150" .025" .195" .189" SAN-44455TLG4125R 4 .453" .150" .005" .255" .125" SAN-52170TLG4189R 4 .453" .250" .020" .255" .189" SAN-52172TLG4250R 4 .453" .250" .025" .255" .250" SAN-44457

MFG #

INsERt sIZE



InternalTLG2031L 2 .219" .050" .050" .150" .031" SAN-44417TLG2047L 2 .219" .050" .050" .150" .047" SAN-44420TLG2062L 2 .219" .110" .130" .150" .062" SAN-44423TLG3047L 3 .344" .075" .005" .195" .047" SAN-44429TLG3062L 3 .344" .094" .010" .195" .062" SAN-44431TLG3072L 3 .344" .094" .010" .195" .072" SAN-44433TLG3078L 3 .344" .094" .010" .195" .078" SAN-44435TLG3088L 3 .344" .094" .010" .195" .088" SAN-44437TLG3094L 3 .344" .150" .010" .195" .094" SAN-44439TLG3110L 3 .344" .150" .010" .195" .110" SAN-44443TLG3125L 3 .344" .150" .010" .195" .125" SAN-44447TLG3156L 3 .344" .150" .010" .195" .156" SAN-44451TLG3178L 3 .344" .150" .010" .195" .178" SAN-44453TLG3189L 3 .344" .150" .025" .195" .189" SAN-44454TLG4125L 4 .453" .150" .005" .255" .125" SAN-52169TLG4189L 4 .453" .250" .020" .255" .189" SAN-52171TLG4250L 4 .453" .250" .025" .255" .250" SAN-44456

MFG #



ExternalTLGP3047R .344" .075" .005" .195" .047" SAN-44468TLGP3062R .344" .094" .010" .195" .062" SAN-44470TLGP3094R .344" .150" .010" .195" .094" SAN-44478TLGP3125R .344" .150" .010" .195" .125" SAN-44481

MFG #

INsERt sIZE



TLR3031R 3 .344" .094" .031" .195" .062" SAN-44489TLR3031L 3 .344" .094" .031" .195" .062" SAN-44488TLR3062R 3 .344" .150" .062" .195" .124" SAN-44493TLR3062L 3 .344" .150" .062" .195" .124" SAN-44492TLR3094R 3 .344" .150" .094" .195" .188" SAN-52211TLR3094L 3 .344" .150" .094" .195" .188" SAN-52209












































CARBIDE CuttIng


hELICAL FLutEs WIth thRu-hOLE COOLANtFEAtuREs:• Axialcoolant-thru• Idealforblindholes

HElICool

tHREADMIllIng

AMERICAN uN:• Diameterrange#10x24to1x8UNC

and UNF• Availablein1.5xDand2xDIsO MEtRIC:• Diameterrange3mmx.5to

24mmx3• Availablein1.5xDand2xDNpt:• Diameterrange1/16-27to3"x8NptF:• Diameterrange1/16x27to3/4x14WhItWORth:• Diameterrange1/4x20to11/16x11• Availablein2xD

Bsp (G):• Diameterrange1/16x28to4x14• Availablein1.5xDand2xDBspt:• Diameterrange1/16x28to 2-1/2x11hELICOOL-R:• Radialcoolantforeffectivechip

evacuation in thru-holeshELICOOL-C:• Axialcoolant-thru• Threadandchamferinonetool!

MINIAtuRE thREADMILLsMIllIPRoAMERICAN uN:• Diameterrange#1x72to7/16x14• Availablein2xDand3xD

IsO MEtRIC:• Diameterrange1.6mmx.35to

12mmx1.75• Availablein2xDand3xD

INsERt

sIZE

DIMENsIONs

ORDER #L L1 D D21/4" 2.75" .47" .500" .45" TMC050-21/4" 3.50" .79" .750" .45" TMC075-23/8" 3.56" .87" .625" .67" TMC0625-33/8" 3.75" 1.69" .750" .79" TMC075-35/8" 4.38" 2.05" 1.000" 1.18" TMC100-55/8" 4.75" 2.28" 1.250" 1.46" TMC125-5

L1

L

D

L1

L

D

INsERt

sIZE

DIMENsIONs

ORDER #L L1 D D23/8" 5.00" .98" 1.00" .87" TMLC100-35/8" 5.88" 3.62" 1.00" 1.18" TMLC100-55/8" 6.33" 3.86" 1.25" 1.46" TMLC125-5

L1

L

D

INsERt

sIZE

DIMENsIONs ORDER # (for Rh

toolholder)L L1 D D23/8" 3.38" .91" .75" .75" TMNC075-35/8" 4.75" 2.28" 1.25" 1.46" TMNC125-5

stANDARD tOOLhOLDERstM SERIES

LONG tOOLhOLDERstMl SERIES

tOOLhOLDERs FOR Npt thREADstMn SERIES

CAll FoR MoRE InFoRMAtIon AnD PRICIng

• Speciallydesignedforhardmaterials up to 62 HRc

MuLtI-FLutE INDEXABLE thREADMILLsMitM SERIESMitM 24 (M):For small bores.

Standard:# of flutes 1-2Cutting dia .54 - .63"Tool overhang 1.02 - 1.42"

Conical:# of flutes 1Cutting dia .547"Tool overhang 1.02"

MitM 25 (s):For standard applications.

Standard:# of flutes 2-5Cutting dia .67 - 1.18"Tool overhang 1.10 - 3.15"

Conical:# of flutes 2-4Cutting dia .67 - 1.10"Tool overhang 1.10 - 1.70"

MitM 40 (s):For long threads.

Standard:# of flutes 3-4Cutting dia .87 - 1.18"Tool overhang 1.69 - 3.15"

FOR stANDARD thREADs

RtMC SERIES

INsERt

sIZE

DIMENsIONs

ORDER #L L1 D D225mm 3.65" 1.45" .75" .67" RTMC075067-145S225mm 3.86" 1.45" 1.00" .67" RTMC100067-145S225mm 4.15" 1.75" 1.00" .75" RTMC100075-175S225mm 4.09" 1.70" 1.00" .87" RTMC100087-170S325mm 4.53" 2.20" 1.00" 1.18" RTMC100118-220S5

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=VAR-TMC0502






http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=VAR-TMLC1003



http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=VAR-TMNC0753

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=VAR-TMNC1255

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=VAR-RTMC075067145S2






CARBIDE CuttIng

MIN ID thREAD CuttER DIAMEtER* INsERt NuMBER

LENGth OF Cut

# OF FLutEs tOOL LENGth

shANk DIA ORDER #uN MEtRIC stANDARD OVERsIZE

.875" 22mm .700" (17.78mm) .820" (20.83mm) ATM-38A 1.0" (25mm) 2 4.00" (102mm) .500" 78-TA-05-F21.000" 24mm .750" (19.05mm) .870" (22.10mm) ATM-38A 1.0" (25mm) 2 4.00" (102mm) .750" 01-TA-34-F21.000" 24mm .750" (19.05mm) .870" (22.10mm) ATM-38A 1.0" (25mm) 2 6.00" (152mm) .750" 01-TA-34-F2-61.000" 27mm .844" (21.44mm) .964" (24.49mm) ATM-38B 1.5" (38mm) 3 4.00" (102mm) .875" 01-TA-78-F31.000" 27mm .844" (21.44mm) .964" (24.49mm) ATM-38B 1.5" (38mm) 3 9.00" (229mm) .875" 01-TA-78-F3-91.250" 33mm .970" (24.64mm) 1.100" (27.94mm) ATM-410A 1.5" (38mm) 3 4.25" (108mm) .875" 125-TA-78-F31.250" 33mm .970" (24.64mm) 1.100" (27.94mm) ATM-410A 1.5" (38mm) 3 9.00" (229mm) .875" 125-TA-78-F3-91.375" 35mm 1.180" (29.97mm) 1.310" (33.27mm) ATM-410A 1.5" (38mm) 4 7.00" (178mm) 1.250" 138-TA-125-F4-71.375" 35mm 1.180" (29.97mm) 1.310" (33.27mm) ATM-410A 1.5" (38mm) 4 9.00" (229mm) 1.250" 138-TA-125-F4-91.500" 39mm 1.220" (30.99mm) 1.350" (34.29mm) ATM-410A 1.5" (38mm) 5 4.50" (114mm) 1.000" 15-TA-01-F51.500" 39mm 1.220" (30.99mm) 1.350" (34.29mm) ATM-410A 1.5" (38mm) 5 9.00" (229mm) 1.000" 15-TA-01-F5-91.750" 45mm 1.470" (37.34mm) 1.600" (40.64mm) ATM-410A 1.5" (38mm) 5 4.50" (114mm) 1.250" 175-TA-125-F51.750" 45mm 1.470" (37.34mm) 1.600" (40.64mm) ATM-410A 1.5" (38mm) 5 9.00" (229mm) 1.250" 175-TA-125-F5-92.000" 52mm 1.720" (43.69mm) 1.850" (46.99mm) ATM-410A 1.5" (38mm) 6 5.00" (127mm) 1.250" 20-TA-125-F62.000" 52mm 1.720" (43.69mm) 1.850" (46.99mm) ATM-410A 1.5" (38mm) 6 9.00" (229mm) 1.250" 20-TA-125-F6-9

MIN ID thREAD CuttER DIAMEtER* INsERt NuMBER

LENGth OF Cut tOOL LENGth

shANk DIA ORDER #uN MEtRIC stANDARD OVERsIZE

3/4" 20mm .625" (15.88mm) .750" (19.05mm) ATM-38A 1.00" (25mm) 4.0" (102mm) .75" 34-TA-347/8" 24mm .750" (19.05mm) .870" (22.10mm) ATM-38B 1.50" (38mm) 4.5" (114mm) .75" 78-TA-341" 27mm .844" (21.44mm) .964" (24.49mm) ATM-38B 1.50" (38mm) 4.5" (114mm) 1.00" 01-TA-01

1-1/4" 33mm .970" (24.64mm) 1.100" (27.94mm) ATM-410A 1.50" (38mm) 4.5" (114mm) 1.00" 125-TA-01

MuLtI-FLutEFEAtuREs:• Coolant-thru• HardenedandCNCground• Standardweldonshanks• Highpressuretoolstyle

available• MinimumI.D.thread

recommended for standard pitches only; for large pitches in internal applications double check tool cutter diameter and minor diameter for proper clearance

REPlACEABlE InSERt tHREADMIllS

tHREADMIllIng

sINGLE-FLutEFEAtuREs:• Economicalalternative

for short run jobs• Usesstandardadvent

inserts• Hardenedtoolsteel

body• Longinsertsfor

longer thread forms

CALL FOR MORE INFORMAtION AND pRICING

NptFEAtuREs:• Willcutinternalandexternalthread• Customweldonflatsavailablein

lieu of round shanks

SolID CARBIDE HElICAl FlutE tHREADMIllS

* Standard Pitches st 40UN - 10UN and 1.0 - 2.5mmOversized Inserts OsCoverAllLargePitches:9UN-4UN,

3.0mm and up, and all Tapered Forms

15-TA-01-F5 125-TA-78-F3

34-TA-34

78-TA-34REPlACEABlE InSERtS

INsERt sIZE pItCh AVAILABLE

INsERt hEIGht

tOOL CuttER

DIAMEtER*LENGth OF Cut

ATM-38A

10UN-40UN, 1.0 - 2.5mm,11.5NPS-27NPS,11.5NPSF-27NPSF, 11BSP,14BSP

.250" (6.35mm) ST 1.00"

(25mm)

3.0mm E2 .280" (7.11mm) ST+.06" 1.00"

(25mm)6UN-9UN, 3.0 - 4.0mm,11.5NPT-

27NPT,11.5NPTF-27NPTF, 11.5NPS,11.5NPSF, 11BSPT,14BSPT

.310" (7.87mm) OS 1.00"

(25mm)

ATM-38B

10UN-40UN, 1.0 - 2.5mm,11.5NPS-18NPS,11.5NPSF-18NPSF, 11BSP,14BSP

.250" (6.35mm) ST 1.50"

(38mm)6UN-9UN, 3.0 - 4.0mm,8NPT-18NPT,8NPTF-

18NPTF,8NPS,8NPSF, 11BSPT,14BSPT.310"

(7.87mm) OS 1.50" (38mm)

ATM-410A

10UN-40UN, 1.0 - 2.5mm,11.5NPS-18NPS,11.5NPSF-18NPSF, 11BSP,14BSP,10 FA INT,12FA INT, 10FA EXT, 12FA EXT, 10SA,

12SA, 10-20 (7/45)BUTTRESS

.310" (7.87mm) ST 1.50"

(38mm)

4UN-9UN, 3.0 - 6.0mm,8NPT-18NPT,8NPTF-18NPTF,8NPS,8NPSF,

11BSPT,14BSPT,3.5FA-8FA INT, 5FA-8FA EXT, 3SA-8SA, 8API, 10API, 6-8 (7/45)

BUTTRESS,

.375" (9.53mm) OS 1.50"

(38mm)

3FA INT, 3FA-4FA EXT .408" (10.36mm) OS+0.066" 1.50"

(38mm)

3.5UN INT, 3.5UN EXT .425" (10.80mm) OS+0.100" 1.50"

(38mm)

3UN INT, 3UN EXT .475" (12.07mm) OS+0.200" 1.50"

(38mm)

381838-1CSNPTF3HC

121412-1CSNPTHC

pItChCuttER

DIAshANk

DIALENGth OF Cut MIN sIZE

COAt-ING ORDER #

27 .308" .312" .741" 1/8"-27 TiN 51627516-1CSNPTF3HC27 .308" .312" .741" 1/8"-27 TiAlN 51627516-1CSNPTF3HZ18 .370" .375" .778" 1/4 - 3/8"-18 TiN 381838-1CSNPTF3HC18 .370" .375" .778" 1/4 - 3/8"-18 TiAlN 381838-1CSNPTF3HZ14 .495" .500" 1.000" 1/2 - 3/4"-14 TiN 121412-1CSNPTHC14 .495" .500" 1.000" 1/2 - 3/4"-14 TiAlN 121412-1CSNPTHZ

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-78TA05F2















http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-34TA34




http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-516275161CSNPTF3HC

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-516275161CSNPTF3HZ

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-3818381CSNPTF3HC

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-3818381CSNPTF3HZ

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-1214121CSNPTHC

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=ADV-1214121CSNPTHZ

CARBIDE CuttIng


GFI-IKZGFI

Exceptional balance of performance benefits and price are achieved by combining select design elements.FEAtuREs:

SHuR-tHREAD

SolID CARBIDE tHREADMIllIng

GFI: Without Internal Coolant

GFI-IkZ: With Internal Coolant

• Premiummicro-graincarbidewith state-of-the-art grinding techniques

• Speciallyengineeredmultiple-spiral flutes eliminate chatter

• Largecutterdiameterwithhighprofile correction ensures true-to-gauge threads

• Extendedmillingportionallowsfor length-of-cut to 2xD

• Enlargedflutespaceforefficientchip evacuation

• TiCNcoatedforlongtoollife• Producethreads1-1/8"and

under in a wide range of soft and pre-hardened steels to 58 Rc, stainless steels, aluminum, cast, iron, titanium, inconel, and all difficult to machine exotics

pIpE thREADsFEAtuREs:• DesignedtoproduceinternalNPTandNPTFpipe

thread dimensions and limits of size• Manufacturedwithapremiummicro-graincarbide

substrate, TiCN coated, finished ground with precise cutting geometry to ensure long tool life, low cycle times, and superior finished threads in all materials up to 58 Rc

• Americantaperedpipethread,taper1:16• Inchshank• Manufacturedwithacorrectedprofile

quICk DELIVERIEs ARE AVAILABLE FROM EMuGE FOR $25*!Ask OuR CustOMER sALEs REpREsENtAtIVEs FOR MORE DEtAILs.

* Subject to change

GFI: Npt Without Internal Coolant

thREAD sIZECuttER

DIACut

LENGth# OF

FLutEsOVERALL LENGth

shANk DIA ORDER # pRICE

1/4"-20 .185" .524" 3 2-1/2" 1/4" GFR151065009 $257.11 1/4"-28 .203" .517" 3 2-1/2" 1/4" GFR151065043 $257.11 3/8"-16 .301" .780" 3 2-1/2" 5/16" GFR151065011 $265.68 3/8"-24 .309" .769" 3 2-1/2" 5/16" GFR151605045 $265.68 1/2"-13 .371" 1.036" 3 3" 3/8" GFR151065013 $354.31 1/2"-20 .371" 1.023" 3 3" 3/8" GFR151065047 $354.31 5/8"-11 .496" 1.316" 4 3-3/4" 1/2" EMU-GFR151065015 $389.65 3/4" -10 .621" 1.548" 4 4-1/4" 5/8" GFR151065016 $425.11

1"-8 & 1-1/8"-8 .746" 2.058" 4 4-3/4" 3/4" GFR151065018 $496.13

thREAD sIZECuttER

DIACut

LENGth# OF



1/4"-20 .185" .524" 3 2-1/2" 1/4" GFR351065009 $279.06 1/4"-28 .203" .517" 3 2-1/2" 1/4" GFR351065043 $279.06 3/8"-16 .301" .780" 3 2-1/2" 5/16" EMU-GFR351065011 $289.74 3/8"-24 .309" .769" 3 2-1/2" 5/16" GFR351605045 $289.74 1/2"-13 .371" 1.036" 3 3" 3/8" EMU-GFR351065013 $385.42 1/2"-20 .371" 1.023" 3 3" 3/8" GFR351065047 $385.42 5/8"-11 .496" 1.316" 4 3-3/4" 1/2" EMU-GFR351065015 $423.93 3/4"-10 .621" 1.548" 4 4-1/4" 5/8" EMU-GFR351065016 $461.15

1"-8 & 1-1/8"-8 .746" 2.058" 4 4-3/4" 3/4" GFR351065018 $539.57 6mm x 1mm .189" .491" 3 2-1/2" 1/4" GFR351060060 $301.95

8mm x 1.25mm .246" .663" 3 2-1/2" 1/4" GFR351060080 $301.95 10mm x 1.5mm .309" .796" 3 2-1/2" 5/16" GFR351060100 $312.52 12mm x 1.75mm .371" .997" 3 3" 3/8" GFR351060112 $342.81

thREAD sIZECuttER

DIACut

LENGth# OF



1/8"-27 .301" .389" 3 2-1/4" 5/16" EMU-GFT531065764 $278.71 1/4"-18 .4" .583" 4 3-1/4" 1/2" EMU-GFT531165765 $359.36 3/8"-18 .439" .583" 4 3-1/4" 1/2" GFT531165766 $359.36

1/2"-3/4"-14 .561" .75" 4 3-1/2" 5/8" EMU-GFT531369678 $595.57 1" to 2"-11-1/2 .772" .913" 5 3-3/4" 3/4" EMU-GFT531569679 $700.76

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=EMU-GFR151065009






















http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=EMU-GFT531065764






CARBIDE CuttIng

thE MOst VERsAtILE, pRODuCtIVE sOLID CARBIDE END MILL EVER MADE!With one tool you can achieve the highest removal rates on a full range of materials. Multi-Cut can achieve material removal rates 5 to 10 times that of conventional end mills. With its progressive edge profile, variable helix and flute technology, Multi-Cut totally redefines high performance milling.Multi-Cut Tools are made from select micro-grain carbide to provide maximum cutting performance and tool life. They

MultI-Cut

SolID CARBIDE HIgH PERFoRMAnCE EnD MIllS

feature variable flute spacing and pitch to minimize vibrations, even at high speeds and aggressive cutting depths. The unique chip-breaker technology provides optimum chip evacuation and a patented roughing profile enables short-duration chip contact. A flattened shank design ensures stability in tool clamping, for enhanced process safety.Under optimum operating conditions, Multi-Cut Endmills can remove material at an exceptional rate. To ensure process safety, we recommend initial operational parameters using the low range speed and feed values shown in the chart below. Once stable cutting conditions are realized, both speed and feed values can be incrementally increased. At maximum speed, the chip load per tooth may be increased by up to 60% to achieve maximum material removal. Additional sizes, lengths and ballnose available.MAtERIALs & AppLICAtIONs:• Structuralsteelsupto44HRC• Castiron• Copperalloys• Brass• Bronze• Alloysteel up tO 10X MORE pRODuCtIVE! OutstANDING pERFORMANCE GuARANtEED!

ROuGhING END MILLs FOR hIGh tEMpERAtuRE ALLOYsTiNox’s dynamic flute and proprietary cutting edge design, combined with a high heat-resistant multi-layer TiN/TiAlN coating provides exceedingly long tool life be minimizing friction/vibration and efficiently evacuating shorter chips, which is especially important in tough, long-chipping materials. These end mills offer high performance productivity for Aerospace materials and demanding other applications. Additional sizes, lengths and ballnose available.

tinox-Cut

FEAtuREs:• Geometrydesignedfor

roughing stainless steels, inconel and titanium

• Standardcoolant-thru• Variableflute• Tighth11shanktolerance• Hasanotchintheshank

for mechanical clamping• Guaranteedtodeliver

unmatched material removal rate and tool life

sIZE

DIMENsIONs shANk DIA

# OF FLutEs ORDER # pRICEL2 L1 L4

1/8" 3/16" 2-1/2" 7/8" 3/8" 3 EMU-2869A0125 $116.70 3/16" 9/32" 2-1/2" 7/8" 3/8" 3 EMU-2869A01875 $112.82 1/4" 3/8" 2-1/2" 7/8" 3/8" 4 EMU-2869A0250 $110.83 5/16" 7/16" 2-1/2" 7/8" 3/8" 4 2869A.03125 $108.83 3/8" 9/16" 2-1/2" 7/8" 3/8" 4 EMU-2869A0375 $107.07 1/2" 3/4" 3" 1-1/8" 1/2" 4 EMU-2869A0500 $147.81 5/8" 7/8" 3-1/2" 1-1/2" 5/8" 4 EMU-2869A0625 $220.83 3/4" 1-1/8" 4" 1-7/8" 3/4" 4 EMU-2869A0750 $282.11 1" 1-1/2" 5" 2-5/8" 1" 5 EMU-2869A1000 $420.06

4mm 8mm 57mm 18mm 6mm 3 2869A.004 $91.34 6mm 10mm 57mm 20mm 6mm 4 2869A.006 $87.58 8mm 12mm 63mm 25mm 8mm 4 2869A.008 $97.21 10mm 15mm 72mm 30mm 10mm 4 2869A.010 $110.00 12mm 18mm 83mm 35mm 12mm 4 2869A.012 $138.06 16mm 24mm 92mm 40mm 16mm 4 2869A.016 $227.52 20mm 30mm 104mm 50mm 20mm 4 2869A.020 $300.54

sIZE d1

DIMENsIONs# OF

FLutEs ORDER # pRICEl1 l2 d3 l4 d2

1/4" 2-1/2" 17/32" .236" 7/8" 3/8" 4 2649TZ.0250 $94.51 5/16" 2-1/2" 3/4" .295" 15/16" 3/8" 4 2649TZ.03125 $95.56 3/8" 2-3/4" 7/8" .358" 1-1/8" 3/8" 4 2649TZ.0375 $124.21 1/2" 3-1/4" 1-1/8" .480" 1-3/8" 1/2" 4 2649TZ.0500 $160.37 5/8" 3-1/2" 1-1/4" .605" 1-1/2" 5/8" 4 2649TZ.0625 $217.66 3/4" 4" 1-1/2" .730" 1-7/8" 3/4" 4 2649TZ.0750 $288.45 1" 5" 1-3/4" .969" 2-5/8" 1" 5 2649TZ.1000 $458.21

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=EMU-2869A0125
















http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=EMU-2649TZ0250







CARBIDE CuttIng


SPECIAlty SolID CARBIDE EnD MIllS & CuttIng toolS


CARBIDE CuttIng

sERIEs 160MFEAtuREs:• Shorterflutelengthforrigidity

StuB lEngtH, gEnERAl PuRPoSE

SolID CARBIDE EnD MIllS

and economy• 2flutes• 30o helix -

rhs/rhc• Madefrom

premium micro grain carbide

• Centrecutting

sERIEs 170M & 170MAFEAtuREs:• Solidsubmicrongraincarbide

end mill - centre cutting• 4flutes• Shorterflutelengthforrigidity• Extremelyversatile

170M

170MA

• Series170MAisTiAlNcoated-canbeusedfordryorsemi-drymachining; up to 40% faster than uncoated

sERIEs 190MFEAtuREs:• Solidsubmicrongraincarbideendmill-centrecutting• 4flutes• Shorterflutelengthforrigidity• Dryorsemi-dry

machining• TiAlNcoated• Upto40%faster

than uncoated• Extremely

versatile

StAnDARD lEngtH, gEnERAl PuRPoSEsERIEs 220M, 223M & 230M

220M

223M

230M

FEAtuREs:• 220M2flutes• 223M3flutes• 230M4flutes• 30°helix-

rhs/rhc• Forapplica-

tions in steel and high temperature alloys

• Hightransverse rupture strength

• Madefrompremium micro grain carbide

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth

170M 170MAORDER # pRICE ORDER # pRICE

1/32" 1/8" 1-1/2" 1/16" GAR-02017 $15.15 1/16" 1/8" 1-1/2" 1/8" GAR-02037 $12.63 3/32" 1/8" 1-1/2" 3/16" GAR-02040 $9.17 GAR-02047 $12.11 1/8" 1/8" 1-1/2" 1/4" 02050 $8.92 GAR-02057 $11.85 5/32" 3/16" 2" 5/16" 02060 $12.52 GAR-02067 $15.45 3/16" 3/16" 2" 3/8" 02070 $11.85 GAR-02077 $14.80 1/4" 1/4" 2" 1/2" 02090 $15.48 GAR-02097 $20.07 3/8" 3/8" 2" 5/8" 02110 $26.17 3/8" 3/8" 2" 5/8" GAR-02117 $32.70 1/2" 1/2" 2-1/2" 5/8" GAR-02137 $53.47

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth ORDER # pRICE

1/16" 1/8" 1-1/2" 1/8" GAR-04037 $14.34 3/32" 1/8" 1-1/2" 3/16" 04047 $13.71 1/8" 1/8" 1-1/2" 1/4" GAR-04057 $13.44 1/4" 1/4" 2" 1/2" 04097 $22.81 3/8" 3/8" 2" 5/8" 04117 $37.31

sIZEshANk

DIAOVERALL LENGth


1/16" 1/8" 1-1/2" 1/8" GAR-01030 $9.69 3/32" 1/8" 1-1/2" 3/16" GAR-01040 $9.17 1/8" 1/8" 1-1/2" 1/4" GAR-01050 $8.92 3/16" 3/16" 2" 3/8" GAR-01070 $11.85 1/4" 1/4" 2" 1/2" GAR-01090 $15.48 3/8" 3/8" 2" 5/8" GAR-01110 $26.17 1/2" 1/2" 2"-1/2" 5/8" GAR-01130 $43.16

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth

220M - 2 FLutEsORDER # pRICE

1/32" 1/8" 1-1/2" 3/32" GAR-11010 $12.21 1/16" 1/8" 1-1/2" 1/4" GAR-11030 $11.33 3/32" 1/8" 1-1/2" 3/8" GAR-11050 $10.71 1/8" 1/8" 1-1/2" 1/2" GAR-11070 $8.63 5/32" 3/16" 2" 9/16" GAR-11090 $14.62 3/16" 3/16" 2" 5/8" GAR-11110 $13.11 7/32" 1/4" 2-1/2" 5/8" GAR-11130 $18.37 1/4" 1/4" 2-1/2" 3/4" GAR-11150 $14.59 5/16" 5/16" 2-1/2" 7/8" GAR-11190 $22.16 3/8" 3/8" 2-1/2" 7/8" GAR-11230 $27.62 7/16" 7/16" 2-3/4" 1" GAR-11270 $33.70 1/2" 1/2" 3" 1" GAR-11310 $44.22

9/16" 9/16" 3-1/2" 1-1/4" GAR-11320 $75.55 5/8" 5/8" 3-1/2" 1-1/4" GAR-11330 $85.30 3/4" 3/4" 4" 1-1/2" GAR-11350 $125.04 7/8" 7/8" 4" 1-1/2" GAR-11360 $179.97 1" 1" 4" 1-1/2" GAR-11370 $187.08

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth


1/16" 1/8" 1-1/2" 1/4" 12030 $11.33 3/32" 1/8" 1-1/2" 3/8" 12050 $10.71 1/8" 1/8" 1-1/2" 1/2" GAR-12070 $9.89 5/32" 3/16" 2" 9/16" 12090 $14.62 3/16" 3/16" 2" 5/8" GAR-12110 $13.86 1/4" 1/4" 2-1/2" 3/4" GAR-12150 $16.71 3/8" 3/8" 2-1/2" 7/8" GAR-12230 $29.21 7/16" 7/16" 2-3/4" 1" 12270 $35.63 9/16" 9/16" 3-1/2" 1-1/4"5/8" 5/8" 3-1/2" 1-1/4" 12330 $90.20

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth


1/16" 1/8" 1-1/2" 1/4" GAR-13030 $11.33 3/32" 1/8" 1-1/2" 3/8" GAR-13050 $10.71 9/64" 3/16" 2" 9/16" 13080 $14.62 1/8" 1/8" 1-1/2" 1/2" GAR-13070 $9.35 5/32" 3/16" 2" 9/16" GAR-13090 $14.62 3/16" 3/16" 2" 5/8" GAR-13110 $13.11 1/4" 1/4" 2-1/2" 3/4" GAR-13150 $15.80 5/16" 5/16" 2-1/2" 7/8" GAR-13190 $22.16 3/8" 3/8" 2-1/2" 7/8" GAR-13230 $27.62 7/16" 7/16" 2-3/4" 1" GAR-13270 $33.70 1/2" 1/2" 3" 1" GAR-13310 $44.22 5/8" 5/8" 3-1/2" 1-1/4" GAR-13330 $85.30 3/4" 3/4" 4" 1-1/2" GAR-13350 $132.25 1" 1" 4" 1-1/2" GAR-13370 $187.08

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=GAR-02017



































































CARBIDE CuttIng


StAnDARD lEngtH, gEnERAl PuRPoSE


sERIEs 220MA, 223MC, 230MC & 230MAFEAtuREs:• 30o helix - rhs/rhc

220MA

223MC 230MA

230MC

• 220MA2flutes• 223MC3flutes• 230MCand230MA4flutes• Forimprovedlubricityand

abrasion resistance• Forapplicationsinsteel

and high temperature alloys• Hightransverserupture

strength• MCseriesTiCNcoated• MAseriesTiAlNcoated-an

excellent solution for dry machining; allows speeds and feeds 30%-50% faster than uncoated

sERIEs 320M, 330M, 330MC & 330MAFEAtuREs:

320MA320MC320M

• 320M2flutes• 330M,330MCand

330MA 4 flutes• 30o helix - rhs/rhc• Forapplications

in steel and high temperature alloys

• Hightransverserupture strength

• MCseriesTiCNcoated - for improved lubricity and abrasion resistance

• MAseriesTiAlNcoated- for dry or semi-dry machining; up to 40% faster than uncoated; extremely versatile 330MA

330MC

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth

220MA - 2 FLutEs 223MC - 3 FLutEs 230MC - 4 FLutEs 230MA - 4 FLutEs ORDER # pRICE ORDER # pRICE ORDER # pRICE ORDER # pRICE

1/32" 1/8" 1-1/2" 3/32" GAR-13017 $15.15 3/64" 1/8" 1-1/2" 1/8" GAR-11027 $15.15 GAR-13027 $15.15 1/16" 1/8" 1-1/2" 1/4" GAR-11037 $14.28 13034 $13.93 GAR-13037 $14.28 3/32" 1/8" 1-1/2" 3/8" GAR-11057 $13.65 GAR-13057 $13.65 1/8" 1/8" 1-1/2" 1/2" GAR-11077 $12.82 GAR-13074 $12.48 GAR-13077 $12.12 5/32" 3/16" 2" 9/16" 11097 $17.55 GAR-13097 $17.55 3/16" 3/16" 2" 5/8" GAR-11117 $16.80 GAR-12114 $16.45 GAR-13114 $16.45 GAR-13117 $15.88 7/32" 1/4" 2-1/2" 5/8" 11137 $24.45 13137 $24.45 1/4" 1/4" 2-1/2" 3/4" GAR-11157 $22.78 GAR-12154 $21.97 GAR-13154 $21.97 GAR-13157 $19.89 5/16" 5/16" 2-1/2" 7/8" GAR-11197 $32.52 GAR-12194 $30.47 GAR-13194 $30.47 GAR-13197 $30.75 3/8" 3/8" 2-1/2" 7/8" GAR-11237 $38.26 GAR-13234 $36.22 GAR-13237 $36.17 1/2" 1/2" 3" 1" GAR-11317 $53.03 GAR-12314 $55.22 GAR-13314 $52.22 GAR-13317 $49.84 5/8" 5/8" 3-1/2" 1-1/4" GAR-11337 $105.13 3/4" 3/4" 4" 1-1/2" 11357 $149.86 GAR-13357 $141.70 1" 1" 4" 1-1/2" GAR-13377 $223.84

sIZEshANk

DIAOVERALL LENGth

FLutE LENGth

320M - 2 FLutEs 330M - 4 FLutEs 330MC - 4 FLutEs 330MA - 4 FLutEsORDER # pRICE ORDER # pRICE ORDER # pRICE ORDER # pRICE

1/32" 1/8" 1-1/2" 3/32" GAR-16010 $15.48 3/64" 1/8" 1-1/2" 1/8" 16020 $15.48 1/16" 1/8" 1-1/2" 1/4" GAR-16030 $14.62 GAR-18030 $14.62 GAR-18037 $17.55 3/32" 1/8" 1-1/2" 3/8" GAR-16050 $13.97 GAR-18057 $16.91 1/8" 1/8" 1-1/2" 1/2" GAR-16070 $11.78 GAR-18070 $12.69 GAR-18074 $15.26 GAR-18077 $15.62 5/32" 3/16" 2" 9/16" GAR-18097 $21.56 3/16" 3/16" 2" 5/8" GAR-16110 $16.71 GAR-18110 $16.71 GAR-18117 $19.65 7/32" 1/4" 2-1/2" 5/8" GAR-18130 $21.65 1/4" 1/4" 2-1/2" 3/4" GAR-16150 $20.76 GAR-18150 $20.76 GAR-18154 $26.00 GAR-18157 $26.80

5/16" 5/16" 2-1/2" 7/8" GAR-16190 $27.22 GAR-18194 $34.28 GAR-18197 $36.32 3/8" 3/8" 2-1/2" 7/8" GAR-16230 $33.30 GAR-18230 $33.30 GAR-18234 $40.33 GAR-18237 $42.42 7/16" 7/16" 2-3/4" 1" 16270 $40.99 GAR-18274 $49.43 1/2" 1/2" 3" 1" GAR-16310 $62.01 18314 $70.46 GAR-18317 $72.35 5/8" 5/8" 3-1/2" 1-1/4" GAR-18330 $100.28 3/4" 3/4" 4" 1-1/2" 16350 $147.58 GAR-18350 $147.58

Alwaysorderingthesameitems?CreateapersonalizedShoppingListonourwebsite www.thomasskinner.com to make ordering fast and easy!











































































CARBIDE CuttIng

sERIEs 253MAFEAtuREs:• 3flutes• 50o helix - rhs/rhc• Forimprovedlubricityand

abrasion resistance

• Forimprovedfinishesonaluminium• Sharpcorners• Madefrompremiummicrograin

carbide• BalinitX.CEEDcoated

• Forhighperformance milling in stainless steel and high temperature alloys



sERIEs 820M, 830M & 830MA - MEtRIC sIZEsFEAtuREs:• 820M2flutes• 830M&

830MA 4 flutes

830M

820M

• MAseriesTiAIN coated

• 30o helix - rhs/rhc

• Hightransverse rupture strength

• Extremelyversatile• Madefrompremiummicrograincarbide

sERIEs 220RFEAtuREs:

sERIEs 230RAFEAtuREs:


• Cornerradius for stronger corners and part radius

• 2flutes• Centre

cutting• Corner

radius toler-ance +.001

• Cornerradiusforstrongercorners and part radius

• 4flutes• Centrecutting

• Extremelyversatile• TiAlNcoated-fordryorsemi-dry

machining; up to 40% faster than uncoated

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2-1/2" 3/4" GAR-86227 $23.66 5/16" 5/16" 2-1/2" 13/16" 86277 $33.74 3/8" 3/8" 2-1/2" 1" GAR-86327 $39.81 3/8" 3/8" 3-1/2" 1-1/2" 86347 $57.44 1/2" 1/2" 3" 1" GAR-86427 $59.54 1/2" 1/2" 4" 2" 86447 $80.57 5/8" 5/8" 3-1/2" 1-1/4" 86527 $109.86

sIZEshANk

DIAOVERALL LENGth


820M - 2 flutes1.0mm 3mm 38mm 4mm GAR-45010 $12.82 2.0mm 3mm 38mm 8mm GAR-45030 $11.89 2.5mm 3mm 38mm 12mm 45040 $11.25 3.0mm 3mm 38mm 12mm GAR-45050 $10.38 4.0mm 4mm 50mm 14mm GAR-45070 $14.58 5.0mm 5mm 65mm 16mm 45090 $17.02 6.0mm 6mm 65mm 19mm GAR-45100 $17.55 8.0mm 8mm 65mm 22mm GAR-45120 $24.62 10.0mm 10mm 70mm 25mm GAR-45140 $35.54 12.0mm 12mm 75mm 25mm GAR-45160 $49.13 830M - 4 flutes2.0mm 3mm 38mm 8mm GAR-46030 $11.89 3.0mm 3mm 38mm 12mm GAR-46050 $10.38 4.0mm 4mm 50mm 14mm GAR-46070 $14.58

830MA - 4 flutes1.0mm 3mm 38mm 4mm 46017 $15.76 2.0mm 3mm 38mm 8mm 46037 $14.82 3.0mm 3mm 38mm 12mm 46057 $13.33 4.0mm 4mm 50mm 14mm 46077 $17.51 6.0mm 6mm 65mm 19mm 46107 $23.62 8.0mm 8mm 65mm 22mm 46127 $33.70 10.0mm 10mm 70mm 25mm 46147 $45.85 12.0mm 12mm 75mm 25mm 46167 $59.43

sIZECORNER RADIus

shANk DIA

OVERALL LENGth


3/32" .015" 1/8" 1-1/2" 3/8" 80617 $16.91 1/8" .015" 1/8" 1-1/2" 1/2" GAR-80017 $15.62 1/8" .020" 1/8" 1-1/2" 1/2" GAR-80027 $15.62 1/8" .030" 1/8" 1-1/2" 1/2" 80037 $15.62 3/16" .010" 3/16" 2" 5/8" GAR-80047 $19.65 3/16" .015" 3/16" 2" 5/8" 80057 $19.65 3/16" .020" 3/16" 2" 5/8" GAR-80067 $19.65 3/16" .030" 3/16" 2" 5/8" 80077 $19.65 1/4" .020" 1/4" 2-1/2" 3/4" GAR-80117 $26.80 1/4" .030" 1/4" 2-1/2" 3/4" GAR-80127 $26.80 1/4" .060" 1/4" 2-1/2" 3/4" GAR-80147 $26.80 5/16" .020" 5/16" 2-1/2" 7/8" 80177 $36.32 5/16" .060" 5/16" 2-1/2" 7/8" 80207 $36.32 3/8" .015" 5/16" 2-1/2" 7/8" GAR-80237 $42.42 3/8" .030" 3/8" 2-1/2" 7/8" GAR-80257 $42.42 3/8" .060" 3/8" 2-1/2" 7/8" 80277 $42.42 1/2" .015" 1/2" 3" 1" GAR-80307 $72.35 1/2" .020" 1/2" 3" 1" 80317 $72.35 1/2" .030" 1/2" 3" 1" GAR-80327 $72.35 1/2" .060" 1/2" 3" 1" GAR-80347 $72.35 1/2" .125" 1/2" 3" 1" 80367 $72.35 5/8" .020" 5/8" 3-1/2" 1-1/4" 80387 $115.19 3/4" .015" 3/4" 4" 1-1/2" 80447 $165.18 3/4" .125" 3/4" 4" 1-1/2" 80507 $165.18

sIZECORNER RADIus

shANk DIA

OVERALL LENGth


1/4" .015" 1/4" 2-1/2" 3/4" GAR-79100 $20.76 1/4" .020" 1/4" 2-1/2" 3/4" GAR-79110 $20.76 1/4" .030" 1/4" 2-1/2" 3/4" GAR-79120 $20.76 1/4" .060" 1/4" 2-1/2" 3/4" 79140 $20.76

5/16" .015" 5/16" 2-1/2" 7/8" 79160 $27.22 5/16" .030" 5/16" 2-1/2" 7/8" GAR-79180 $27.22 3/8" .030" 3/8" 2-1/2" 7/8" GAR-79250 $33.30 3/8" .060" 3/8" 2-1/2" 7/8" 79270 $33.30 1/2" .030" 1/2" 3" 1" GAR-79320 $62.01 1/2" .125" 1/2" 3" 1" GAR-79360 $62.01 5/8" .060" 5/8" 3-1/2" 1-1/4" GAR-79410 $100.28 3/4" .020" 3/4" 4" 1-1/2" 79450 $147.58 1" .060" 1" 4" 1-1/2" 79550 $255.98


































































CARBIDE CuttIng



sERIEs 143M - ALuMAstARFEAtuREs:• 3flutes• 38o helix - rhs/rhc• Forhighspeedmachiningofaluminum• Centrecutting• Madefromsubmicrongraincarbide• Highvelocity-highmetalremovalrate(for5,000-25,000RPMspindles)• Needtouseproperlybalancedholders• Alumastarcoated

sERIEs 143RFEAtuREs:• Cornerradius• 3flutes• 38o helix - rhs/rhc• Forhighspeedmachiningof

aluminum• Centrecutting• Madefromsubmicrongraincarbide

StAnDARD lEngtH, HIgH PERFoRMAnCE

• Highvelocity-highmetalremoval rate (for 5,000-25,000 RPM spindles)

• Needtouseproperlybalancedholders

• Alumastarcoated

StAnDARD lEngtH, HIgH PERFoRMAnCEsERIEs 142MFEAtuREs:• Squareend• 2flutes• 41o helix - rhs/rhc• Forhighspeedmachiningof

• Highvelocity-highmetalremovalrate (for 10,000RPM spindles and above)

• Needtouseproperlybalancedholders

• Alumastarcoatedaluminum

• Centrecutting• Madefrom

submicron grain carbide

sERIEs 142RFEAtuREs:• Allthefeaturesof142Mplusacornerradius•Alumastarcoated

sERIEs 142BFEAtuREs:• Allthefeaturesof143Mplusaballend• Alumastarcoated

sIZEshANk

DIAOVERALL LENGth


3/16" 3/16" 2" 9/16" 41283 $22.18 3/16" 3/16" 3" 1" 41313 $35.78 1/4" 1/4" 2-1/2" 3/4" 41463 $27.92 1/4" 1/4" 3" 1" 41473 $42.33 5/16" 5/16" 2-1/2" 3/4" 41603 $38.78 3/8" 3/8" 2-1/2" 1/2" 41713 $45.57 3/8" 3/8" 2-1/2" 7/8" 41723 $45.57 3/8" 3/8" 3" 1" 41733 $58.75 3/8" 3/8" 4" 1/2" 41763 $77.01 1/2" 1/2" 3" 1-1/4" 41943 $72.87 1/2" 1/2" 4" 1-5/8" 41963 $95.27 1/2" 1/2" 4" 2" 41973 $95.27 3/4" 3/4" 4" 1" 42133 $185.83 3/4" 3/4" 5" 2-1/4" 42153 $245.37 1" 1" 4" 1-5/8" 42303 $279.29

sIZECORNER RADIus

shANk DIA

OVERALL LENGth


1/4" .015" 1/4" 2-1/2" 3/4" 39463 $32.67 1/4" .030" 1/4" 2-1/2" 3/4" 39473 $32.67 3/8" .030" 3/8" 2-1/2" 7/8" 39723 $50.39 3/8" .060" 3/8" 2-1/2" 7/8" 39733 $50.39 1/2" .030" 1/2" 3" 1-1/4" 39943 $90.82 1/2" .060" 1/2" 3" 1-1/4" 39953 $90.82 3/4" .030" 3/4" 4" 1-5/8" 40143 $203.87 1" .030" 1" 4" 1-5/8" 40293 $347.68

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2-1/2" 3/4" GAR-41462 $27.92 5/16" 5/16" 2-1/2" 3/4" 41602 $38.78 3/8" 3/8" 2-1/2" 7/8" 41722 $45.57 1/2" 1/2" 3" 1-1/4" GAR-41942 $72.87 5/8" 5/8" 4" 1-5/8" GAR-42022 $145.23 3/4" 3/4" 4" 1-5/8" 42142 $185.83 1" 1" 4" 1-5/8" 42302 $279.29

sIZECORNER RADIus

shANk DIA

OVERALL LENGth


1/4" .015" 1/4" 2-1/2" 3/4" 39462 $32.67 5/16" .015" 5/16" 2-1/2" 3/4" 39602 $43.24 3/8" .030" 3/8" 2-1/2" 7/8" 39722 $50.39 1/2" .030" 1/2" 3" 1-1/4" 39942 $90.82 5/8" .030" 5/8" 4" 1-5/8" 40022 $157.08 3/4" .030" 3/4" 4" 1-5/8" 40142 $203.87 1" .060" 1" 4" 1-5/8" 40302 $347.68

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2-1/2" 3/4" 42762 $32.67 5/16" 5/16" 2-1/2" 3/4" 42902 $43.24 3/8" 3/8" 2-1/2" 7/8" 43022 $50.39 1/2" 1/2" 3" 1-1/4" 43242 $90.82 5/8" 5/8" 4" 1-5/8" 43322 $157.08 3/4" 3/4" 4" 1-5/8" 43442 $203.87 1" 1" 4" 1-5/8" 43602 $347.68














































CARBIDE CuttIngSolID CARBIDE EnD MIllS

sERIEs 242MFEAtuREs:• Forhighspeedmachiningof

aluminum and titanium• 2flutes• 45o helix


• Madefrompremiummicrograincarbide

• Runatmaximum RPM (minimum of 6,000 RPM)

• 1%ofdiameter for chip load

sERIEs 263MCFEAtuREs:• 3flutes• 60o helix• Forimprovedlubricityandabrasionresistance• Forhighperformancemillingonperipherycutsinstainlesssteeland

high temperature alloys• Modifiedendgashforstrongcorners• Canbemodifiedtoaddacornerradius• Madefrom


• TiCNcoated

sERIEs 246MAFEAtuREs:• 40o helix - rhs/rhc• 6flutes• Givesmaximumproductionratesinawiderangeofmaterials• Allowsspeedsandfeeds30%-50%fasterthanuncoated• Offerstheoptimuminheatandabrasionresistance• Anexcellentsolutionfordrymachining• Forall

finishing applications

• TiAlNcoated

sERIEs VhM hOG MILLFEAtuREs:


• Solidsubmicrongraincarbideendmill - centre cutting

• 30o helix• 4flutes• State-of-the-artrougherusing

VRX technology

• Recommendedforstainlesssteel,inconel, pH materials, cold rolled steel, titanium, cast iron and tool steels

• BalinitX,CEEDcoated

• Withweldonflats

• Reducestoolpressure for more aggressive machining

sERIEs VRXFEAtuREs:• Solidsubmicrongraincarbideendmill-centrecutting,cornerradius• 4flutes• State-of-the-artrougher/finisher• Reducesvibrationformoreaggressivemachiningresultinginlesscycle

times and greater productivity• Recommendedforstainlesssteel,inconel,pHmaterials,titaniumand

tool steels• Balinit

X,CEED coated

Details on the inside back cover of this catalogue.

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2" 1/2" GAR-85200 $16.29 1/4" 1/4" 2-1/2" 1" GAR-85220 $17.60 5/16" 5/16" 3" 1-1/8" GAR-85300 $37.15 3/8" 3/8" 2-1/2" 1" GAR-85420 $30.74 3/8" 3/8" 4" 2" GAR-85440 $45.92 1/2" 1/2" 2-1/2" 3/4" GAR-85500 $45.17 1/2" 1/2" 3" 1-1/4" GAR-85520 $49.24 1/2" 1/2" 4" 2" GAR-85540 $67.21 5/8" 5/8" 3-1/2" 1-5/8" GAR-85600 $94.95 3/4" 3/4" 4" 1-3/4" GAR-85700 $139.23 1" 1" 4" 1-3/4" 85800 $208.27

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2-1/2" 3/4" GAR-23014 $22.87 3/8" 3/8" 2-1/2" 7/8" GAR-23034 $37.77 1/2" 1/2" 3" 1" GAR-23054 $57.66 5/8" 5/8" 3-1/2" 1-1/4" 23064 $108.08

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2-1/2" 3/4" 51157 $23.66 3/8" 3/8" 2-1/2" 7/8" 51237 $39.81 1/2" 1/2" 3" 1" GAR-51317 $59.54 5/8" 5/8" 3-1/2" 1-1/4" GAR-51337 $109.86 3/4" 3/4" 4" 1-1/2" GAR-51357 $156.82 1" 1" 4" 1-1/2" 51377 $234.28

sIZEshANk

DIAOVERALL LENGth


5/16" 5/16" 2" 7/16" 49580 $47.81 3/8" 3/8" 2" 1/2" 49640 $54.85 3/8" 3/8" 2-1/2" 7/8" 49660 $62.43 1/2" 1/2" 3" 1-1/4" 49760 $84.41 5/8" 5/8" 3" 3/4" 49780 $131.01 3/4" 3/4" 3" 7/8" 49860 $189.18 3/4" 3/4" 4" 1-5/8" 49880 $193.09

sIZECORNER RADIus

shANk DIA

OVERALL LENGth


1/4" .015" 1/4" 2" 3/8" 27560 $24.19 1/4" .015" 1/4" 2-1/2" 3/4" GAR-27580 $26.80

5/32" .010" 3/16" 2" 5/16" 27460 $21.56 5/16" .020" 5/16" 2-1/2" 13/16" GAR-27620 $36.32 3/8" .020" 3/8" 2" 1/2" 27660 $39.00

10mm .5mm 10mm 70mm 22mm 27700 $51.21 1/2" .020" 1/2" 2-1/2" 5/8" GAR-27741 $64.81 1/2" .010" 1/2" 3" 1-1/4" 27751 $72.35 1/2" .020" 1/2" 3" 1-1/4" GAR-27760 $72.35

14mm .5mm 14mm 75mm 19mm 27765 $106.75







































CARBIDE CuttIng



sERIEs V4sFEAtuREs:• Squareend• 4flutes• Geometryvariesoverlength

of flutes• Variableflutedesignhelps

with chip evacuation in slots and pockets

• Recommendedfortitanium,inconel and steels (<40Rc)

• 12mmandlargertoolsoffered with weldon flat

• Smallerdiameterscanbemodified with a flat within 48 hours - call for details

sERIEs V4B• Allthe

features of V4S plus a ball end

• AlCrN- based coated

StAnDARD lEngtH, vARIABlE HElIxsERIEs V4RFEAtuREs:• AllthefeaturesofV4Splusa

corner radius •AlCrN-basedcoated

• Centrecutting

• Solidsub-micron grain carbide

• AlCrN-based coated

FEAtuREs:FoR MAtERIAlS <54 HRc• Upto60%higherinfeedrates• Longertoollife• Increaseddrillingdepths• Vibration-freemachining

• Suitableforroughingandfinishing• Increasedsurfacefinishquality• Reducedwanderofcutting• Centrecutting

RF 100 uFEAtuREs:• Forfinishing• 4flutes• 35o/38o helix• HAshank

style• FIREX

coating

RF 100 uFEAtuREs:• Forroughing

and finishing• 4flutes• 35o/38o helix• Plainshank• FIREX

coating

RF 100 u-hFFEAtuREs:• Forroughing

and finishing• 4flutes• 30o/32o helix• Plainshank• FIREXcoating

sIZECORNER RADIus

shANk DIA

OVERALL LENGth

FLutE LENGth

pLAIN WELDONORDER # pRICE ORDER # pRICE

1/4" .010" 1/4" 2-1/2" 3/4" 50207 $29.48 -1/4" .015" 1/4" 2-1/2" 3/4" 50208 $29.48 -1/4" .030" 1/4" 2-1/2" 3/4" 50209 $29.48 -

8mm .50mm 8mm 65mm 22mm 50214 $41.44 -8mm .75mm 8mm 65mm 22mm 50356 $41.44 -8mm 1.00mm 8mm 65mm 22mm 50215 $41.44 -3/8" .010" 3/8" 2-1/2" 1" 50216 $46.65 -3/8" .015" 3/8" 2-1/2" 1" 50217 $46.65 -3/8" .030" 3/8" 2-1/2" 1" 50218 $46.65 -

10mm .50mm 10mm 70mm 22mm 50221 $56.32 -10mm .75mm 10mm 70mm 22mm 50359 $56.32 -10mm 1.00mm 10mm 70mm 22mm 50360 $56.32 -12mm .50mm 12mm 75mm 25mm 50364 $82.97 50370 $82.97 12mm .75mm 12mm 75mm 25mm 50365 $82.97 50366 $82.97 12mm 1.00mm 12mm 75mm 25mm 50367 $82.97 50371 $82.97 12mm 1.50mm 12mm 75mm 25mm 50372 $82.97 50373 $82.97

1/2" .020" 1/2" 3" 1-1/4" 50225 $79.58 50273 $79.58 1/2" .030" 1/2" 3" 1-1/4" 50226 $79.58 GAR-50274 $79.58 1/2" .060" 1/2" 3" 1-1/4" 50227 $79.58 50275 $79.58 3/4" .030" 3/4" 4" 1-1/2" 50232 $181.69 GAR-50280 $181.69 1" .030" 1" 4" 1-1/2" 50233 $310.20 50281 $310.20

1/2" .020" 1/2" 3" 1" 50381 $79.60 50382 $79.58 1/2" .030" 1/2" 3" 1" 50383 $81.04 50384 $79.58

sIZEshANk

DIAOVERALL LENGth


6mm 6mm 65mm 12mm 50236 $26.98 1/4" 1/4" 2-1/2" 3/4" 50238 $26.03 3/8" 3/8" 2-1/2" 1" GAR-50241 $43.80

12mm 12mm 75mm 26mm 50450 $68.23 1/2" 1/2" 3" 1-1/4" GAR-50244 $65.50 5/8" 5/8" 3-1/2" 1-1/4" 50246 $120.85 3/4" 3/4" 4" 1-1/2" 50248 $172.50 1" 1" 4" 1-1/2" 50250 $257.71

sIZEshANk

DIAOVERALL LENGth


1/4" 1/4" 2-1/2" 3/4" 50254 $29.48 5/16" 5/16" 2-1/2" 13/16" 50255 $39.94 3/8" 3/8" 2-1/2" 1" 50257 $46.65 1/2" 1/2" 3" 1" 50472 $79.58 5/8" 5/8" 3-1/2" 1-1/4" 50262 $126.70 3/4" 3/4" 4" 1-1/2" 50264 $181.69 1" 1" 4" 1-1/2" 50266 $310.20

DIA shANkOVERALL LENGth

LENGth OF Cut ORDER # pRICE

3/16" 3/16" 2" 3/8" 03113004.760 $18.58 1/4" 1/4" 2" 1/2" 03113006.350 $23.46

5/16" 5/16" 2" 1/2" 03113007.940 $31.64 3/8" 3/8" 2" 5/8" 03113009.520 $36.09 1/2" 1/2" 2-1/2" 5/8" 03113012.700 $62.10 5/8" 5/8" 3" 3/4" 03113015.870 $110.65 3/4" 3/4" 3" 1" 03113019.050 $163.00 1" 1" 3" 1" 03113025.400 $260.33

DIA shANkOVERALL LENGth

LENGth OF Cut ORDER # pRICE

3/8" 3/8" 2-1/2" 7/8" 03082009.520 $74.64 1/2" 1/2" 3-1/2" 1-1/4" 03082012.701 $102.10 5/8" 5/8" 3-1/2" 1-1/4" 03082015.870 $148.13 3/4" 3/4" 3-1/2" 1-5/8" 03082019.050 $248.45 1" 1" 3-1/2" 1-3/4" 03082025.400 $400.93

1/4" 1/4" 2-1/2" 3/4" 03114006.350 $29.28 5/16" 5/16" 2-1/2" 13/16" 03114007.940 $39.53 3/8" 3/8" 2-1/2" 1" 03114009.520 $45.10 1/2" 1/2" 3-1/2" 1-1/4" 03114012.701 $92.86 1/2" 1/2" 4" 1-5/8" 03114012.702 $111.42 1/2" 1/2" 6" 2" 03114012.703 $130.15 5/8" 5/8" 3-1/2" 1-1/4" 03114015.870 $138.29 3/4" 3/4" 4" 1-1/2" GUH-03114019050 $173.23


















































http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=GUH-03113004760






















CARBIDE CuttIngSolID CARBIDE EnD MIllS

sERIEs V5FEAtuREs:• 5flutes• Geometryvariesoverlengthofflutes• Staggeredflutestocontrolharmonics• Variableflutedesignhelpswithchip

evacuation in slots and pockets• Variablerakeaidsinchipformation• Recommendedfortitanium,inconel

and stainless steel• Centrecutting

• Solidsubmicrongraincarbide• 12mmandlargertoolsoffered

with weldon flat• Smallerdiameterscanbe

modified with a flat within 48 hours - call for details

• AlCrN-basedcoated

StAnDARD lEngtH, vARIABlE HElIxsERIEs 620M, 620MA, 630M & 630MAFEAtuREs:• Forextendedreachandextendedlengthsofcutindeeppocket

milling• Madefrompremiummicrograincarbide• MAseriesTiAlNcoated-fordryorsemi-drymachining;upto

40% faster than uncoated; extremely versatile

ExtRA lEngtH, gEnERAl PuRPoSE

620MA

630MA

620M

630M

sIZECORNER RADIus

shANk DIA

OVERALL LENGth

FLutE LENGth

pLAIN WELDONORDER # pRICE ORDER # pRICE

1/4" - 1/4" 2" 3/8" 50007 $23.99 -1/4" .015" 1/4" 2" 3/8" 50008 $27.82 -1/4" .030" 1/4" 2" 3/8" 50009 $27.82 -1/4" - 1/4" 2-1/2" 3/4" 50011 $27.21 -1/4" .020" 1/4" 2-1/2" 3/4" 50013 $30.81 -5/16" - 5/16" 2-1/2" 13/16" 50018 $38.80 -8mm - 8mm 75mm 19mm 50026 $67.28 -3/8" - 3/8" 2" 1/2" 50029 $39.18 -3/8" .015" 3/8" 2" 1/2" 50031 $44.85 -3/8" .020" 3/8" 2" 1/2" 50032 $44.85 -3/8" .030" 3/8" 2" 1/2" 50033 $44.85 -3/8" - 3/8" 2-1/2" 1" 50034 $45.79 -

10mm - 10mm 70mm 22mm 50043 $54.91 -10mm .50mm 10mm 70mm 22mm 50044 $58.90 -12mm - 12mm 75mm 25mm 50484 $72.62 50485 $71.31 12mm - 12mm 75mm 32mm 50048 $71.31 50299 $71.31

1/2" - 1/2" 2-1/2" 5/8" 50054 $64.09 50304 $64.09 1/2" .010" 1/2" 2-1/2" 5/8" 50106 $74.54 50305 $74.54 1/2" .020" 1/2" 2-1/2" 5/8" 50055 $74.54 50306 $74.54 1/2" .030" 1/2" 2-1/2" 5/8" 50107 $74.54 50307 $74.54 1/2" - 1/2" 3" 1" 50056 $68.47 50308 $68.47 1/2" .010" 1/2" 3" 1" 50108 $83.20 50309 $83.20 1/2" .020" 1/2" 3" 1" 50057 $83.20 50310 $83.20 1/2" .030" 1/2" 3" 1" 50109 $83.20 50311 $83.20 1/2" - 1/2" 3" 1-1/4" 50058 $68.47 50312 $68.47 1/2" - 1/2" 4" 2-1/8" 50067 $92.65 50321 $92.65 1/2" .030" 1/2" 4" 2-1/8" 50068 $98.32 50322 $98.32 5/8" - 5/8" 3-1/2" 1-1/4" 50069 $126.34 50323 $126.34 5/8" .030" 5/8" 3-1/2" 1-1/4" 50071 $132.47 50324 $132.47 3/4" - 3/4" 3" 7/8" 50079 $176.31 50332 $176.31 3/4" .030" 3/4" 3" 7/8" 50081 $185.91 50333 $185.91 3/4" - 3/4" 4" 1-1/2" 50082 $180.35 50334 $180.35 3/4" .030" 3/4" 4" 1-1/2" 50083 $189.96 50335 $189.96 3/4" .060" 3/4" 4" 1-1/2" 50084 $189.96 50336 $189.96 1" - 1" 4" 1-1/4" 50094 $269.42 50345 $269.42 1" - 1" 4" 1-1/2" - 50348 $269.42

sIZEshANk

DIAOVERALL LENGth


620M - 2 flutes1/8" 1/8" 3" 1" GAR-41030 $22.39 3/16" 3/16" 3" 1-1/8" GAR-41050 $22.96 1/4" 1/4" 4" 1" GAR-41080 $30.21 3/8" 3/8" 4" 1" GAR-41160 $43.61 7/16" 7/16" 4" 2" 41210 $60.03 1/2" 1/2" 4" 2" GAR-41250 $63.86 5/8" 5/8" 6" 3" 41310 $131.60 3/4" 3/4" 6" 2" 41320 $209.64

620MA - 2 flutes1/4" 1/4" 3" 1" 41077 $34.67 3/4" 3/4" 6" 2" 41327 $235.28

630M - 4 flutes1/8" 1/8" 3" 1" GAR-42030 $22.39 3/16" 3/16" 3" 1-1/8" 42040 $24.70 1/4" 1/4" 4" 1" GAR-42080 $30.21 5/16" 5/16" 4" 1" GAR-42120 $39.41 3/8" 3/8" 4" 1" GAR-42160 $43.61 3/8" 3/8" 4" 2" GAR-42170 $43.61 7/16" 7/16" 6" 1-1/2" GAR-42220 $79.80 1/2" 1/2" 4" 2" GAR-42250 $63.86 1/2" 1/2" 6" 1-1/2" GAR-42260 $92.32 5/8" 5/8" 6" 2" GAR-42300 $131.60

630MA - 4 flutes1/8" 1/8" 3" 1" GAR-42037 $25.98 1/4" 1/4" 3" 1" 42077 $34.67 1/4" 1/4" 4" 1-1/2" 42097 $37.31 5/16" 5/16" 4" 1" GAR-42127 $50.92 5/16" 5/16" 4" 1-5/8" 42137 $50.92 3/8" 3/8" 4" 1" 42167 $55.16 3/8" 3/8" 4" 2" GAR-42177 $55.16 3/8" 3/8" 6" 1-1/2" GAR-42187 $79.34 1/2" 1/2" 4" 1" 42247 $77.20 1/2" 1/2" 4" 2" GAR-42257 $77.20 1/2" 1/2" 6" 3" GAR-42277 $111.09 5/8" 5/8" 6" 3" GAR-42317 $153.76 3/4" 3/4" 6" 3" GAR-42337 $235.28



























































































CARBIDE CuttIng


SolID CARBIDE DRIllS

sERIEs 1180HIgH PERFoRMAnCEFEAtuREs:• 5xD• Designedfordrillingaluminumandothersoftmaterials• Nospotdrillingrequired• Uniquepointgeometryandcoatingforhigherspeedsandfeeds• 30o helix• 140o point• Alumastar

coated• Upto5x

longer tool life than Zrn coated drills

• Madefrom solid submicron grain carbide


sERIEs 730MAFEAtuREs:• 4flutes• Forimprovedlubricityandabrasionresistance• Forextendedreachandextendedlengthsofcutindeeppocketmilling• Madefrompremiummicrograincarbide• TiAlNcoated-fordryorsemi-drymachining;upto40%fasterthan

uncoated; extremely versatile

ExtRA lEngtH, gEnERAl PuRPoSE

sERIEs 630RAFEAtuREs:• Solidsubmicrongraincarbideendmill-centrecutting• 4flutes• Extendedreach• Forstrongercornersandpartradius• Dryorsemi-drymachining• TiAlNcoated-upto40%fasterthanuncoated• Extremelyversatile

sERIEs 350MXFEAtuREs:• Forhighperformancemachininginthediemoldindustry• Forrigidworkholding,machinestabilityandpartintegrityarecritical• 2flutes

SolID CARBIDE DIE MolD CuttERS

• Recommendedfor high Rockwell materials

• BalinitX.CEEDcoated

sIZECORNER RADIus

shANk DIA

OVERALL LENGth


1/8" .020" 1/8" 3" 1" 20127 $29.93 3/16" .060" 3/16" 3" 1" 20207 $33.62 3/16" .060" 3/16" 4" 1" 20267 $36.59 1/4" .030" 1/4" 4" 1" 20347 $42.51 1/4" .060" 1/4" 4" 1" 20367 $42.51 3/8" .010" 3/8" 4" 1" 20497 $62.81 3/8" .020" 3/8" 4" 1" 20507 $62.81 3/8" .060" 3/8" 4" 2" 20607 $62.81 1/2" .020" 1/2" 4" 1" 20717 $85.50 1/2" .015" 1/2" 4" 2" 20777 $85.50 5/8" .030" 5/8" 6" 2" 20947 $172.36 3/4" .060" 3/4" 6" 3" 21037 $272.16

sIZEDEC

EquIVOVERALL LENGth


4mm .1575" 65mm 24mm 70166 $53.77 3/16" .1875" 2-3/4" 1-1/4" 70211 $58.31 #11 .1910" 2-3/4" 1-1/4" 70221 $60.84

5mm .1969" 75mm 32mm 70231 $61.98 #7 .2010" 3" 1-5/16" 70241 $62.53

13/64" .2031" 3" 1-15/16" 70246 $62.98 7/32" .2188" 3" 1-3/8" 70276 $65.36 15/64" .2344" 3-1/4" 1-1/2" 70296 $68.35 6mm .2362" 82mm 38mm 70301 $68.54 1/4"E .2500" 3-1/4" 1-5/8" 70321 $69.95 17/64" .2656" 3-1/2" 1-11/16" 70341 $78.06 9/32" .2812" 3-1/2" 1-3/4" 70371 $85.01 19/64" .2969" 3-3/4" 1-7/8" 70386 $87.95 15/16" .3125" 3-3/4" 1-7/8" 70396 $91.39 8mm .3150" 95mm 48mm 70401 $96.45 11/32" .3438" 4" 2-3/16" 70436 $105.90 23/64" .3594" 4-1/4" 2-9/32" 70456 $119.29

3/8" .3750" 4-1/4" 2-3/8" 70471 $132.70 10mm .3937" 114mm 60mm 70491 $143.73 13/32" .4062" 4-1/2" 2-9/16" 70506 $151.97 27/64" .4219" 4-1/2" 2-11/16" 70516 $154.52 7/16" .4375" 4-3/4" 2-13/16" 70526 $165.47 29/64" .4531" 4-3/4" 2-7/8" 70536 $175.96 12mm .4724" 120mm 73mm 70546 $184.66 31/64" .4844" 5-5/16" 3" 70551 $187.94 1/2" .5000" 5-3/8" 3-1/16" 70561 $190.39

17/32" .5312" 5-11/16" 3-5/16" 70576 $223.58 9/16" .5625" 5-15/16" 3-1/2" 70591 $255.09 5/8" .6250" 6-5/16" 3-3/4" 70616 $294.85

sIZEshANk

DIAOVERALL LENGth


1/32" 1/4" 3" 1/32" GAR-14210 $65.86 1/16" 1/4" 3" 1/16" GAR-14220 $65.86 3/32" 1/4" 3" 3/32" GAR-14230 $65.86 1/8" 1/4" 3" 1/8" GAR-14240 $64.35

sIZEshANk

DIAOVERALL LENGth


1/8” 1/8” 3” 3/4” GAR-44027 $29.93 3/16” 3/16” 4” 1” GAR-44067 $36.59 1/4” 1/4” 4” 1-1/2” GAR-44097 $42.51 3/8” 3/8” 6” 1-1/2” GAR-44187 $86.97 1/2” 1/2” 4” 1” GAR-44247 $85.50 1/2” 1/2” 4” 2” GAR-44257 $85.50 1/2” 1/2” 6” 1-1/2” 44267 $120.92 5/8” 5/8” 6” 2” GAR-44307 $172.36

Always ordering the same items? Create a personalized ShoppingListonourwebsitewww.thomasskinner.com

to make ordering fast and easy!























































CARBIDE CuttIngSolID CARBIDE DRIllS

SolID CARBIDE EngRAvIng BlAnKSsERIEs 2220MFEAtuREs:• Foruseinengraving

and single flute milling in all materials

• Readytobefinishground

• Madefrompremiummicro grain carbide

SolID CARBIDE CEntRE DRIllSsERIEs 1400FEAtuREs:• Combineddrillandcountersink• Forcentredrilling

application• 60°included

countersink angle• 118o drill point• Madefrom


sERIEs 1205FEAtuREs:• 135o point• 2flutes• Self-centringpoint• Stainlesssteelalloys,

mild steels and titanium alloys

4-FACEt DRIll PoInt 5xD JoBBER lEngtH

• Nospottingrequired in most applications

• Adaptabilitywhen converting from high speed steel

sERIEs 1500FEAtuREs:• Formaterial40Rcandhigher• Precisiontighttoleranceholes• Productiondrillingtoadepth3timesthediameterinavarietyof

materials

HARD MEtAl StRAIgHt FlutE

• 135o notched drill point

• Madefrompremium micro grain carbide

sERIEs 1600FEAtuREs:• Forspottingonrough,angledorsphericalsurfaces• Forspottingtostabilizelongdrills

nC SPottIng - 90º PoInt AnglE

• Idealforchamfering• Increasedrigidity-no

O.D. clearance for locating on true position

• HighSFMandlongertool life compared to high speed steel

• Madefrompremiummicro grain carbide

Call our Customer Service Team at 1-866-999-3117 for all your

Carbide Cutting needs.

sIZELENGth OF spLIt

OVERALL LENGth ORDER # pRICE

3/16" 1/2" 2" GAR-54070 $13.59 1/4" 1/2" 2-1/2" 54110 $15.21

5/16" 1/2" 2-1/2" GAR-54160 $23.45 3/8" 1/2" 2-1/2" 54200 $31.76 1/2" 5/8" 3" GAR-54280 $50.57

sIZEFLutE

LENGthOVERALL LENGth ORDER # pRICE

1/8" 3/8" 2" GAR-91000 $14.99 3/16" 3/4" 3" GAR-91010 $19.60 1/4" 3/4" 3" GAR-91020 $23.28 3/8" 1" 3" GAR-91030 $30.54 1/2" 1" 4" GAR-91040 $52.66

#shANk

DIADRILL

DIAOVERALL LENGth ORDER # pRICE

1 1/8" 3/64" 1-1/2" GAR-58030 $16.82 2 3/16" 5/64" 2" GAR-58040 $26.48 3 1/4" 7/64" 2" GAR-58050 $30.17 4 5/16" 1/8’ 2-1/8" GAR-58060 $42.22 5 7/16" 3/16" 2-3/4" GAR-58070 $60.31 6 1/2" 7/32" 3" 58080 $80.28 7 5/8" 1/4" 3-1/8" 58090 $107.45

sIZEFLutE


1/16" 3/4" 1-1/2" GAR-89165 $8.08 3/32" 1" 2" GAR-89235 $11.36 1/8" 1-1/4" 2-1/4" GAR-89310 $13.44 5/32" 1-3/8" 2-1/2" GAR-89365 $16.19 11/64" 1-5/8" 2-3/4" GAR-89400 $19.10 3/16" 1-5/8" 2-3/4" GAR-89435 $20.45 7/32" 1-3/4" 3" GAR-89505 $26.36 1/4" 2" 3-1/4" GAR-89550 $28.36

17/64" 2-1/8" 3-1/2" 89570 $30.87 5/16" 2-3/8" 3-3/4" GAR-89630 $39.09 21/64" 2-1/2" 4" 89650 $42.57 3/8" 2-3/4" 4-1/4" GAR-89705 $55.87 7/16" 2-7/8" 4-1/2" GAR-89765 $72.93 1/2" 3" 4-3/4" GAR-89800 $86.19

17/32" 3-1/4" 5" GAR-89815 $114.09 5/8" 3-1/2" 5-1/4" 89870 $145.59

sIZEFLutE


3/32" 7/8" 2" GAR-59235 $11.58 1/8" 1" 2" GAR-59310 $12.65

5/32" 1-1/8" 2-1/2" GAR-59365 $16.10 3/16" 1-3/16" 2-1/2" GAR-59435 $19.19 7/32" 1-1/2" 2-1/2" GAR-59505 $22.91 1/4" 1-1/2" 2-1/2" GAR-59550 $25.71 9/32" 1-1/2" 2-1/2" GAR-59600 $31.95 5/16" 1-5/8" 2-1/2" GAR-59630 $33.57 3/8" 1-3/4" 3" GAR-59705 $48.07

7/16" 1-3/4" 3" GAR-59765 $68.05 1/2" 1-3/4" 3" GAR-59800 $72.97













































CARBIDE CuttIng


R950 & R960FEAtuREs:• Madeoftoughmicro-graincarbide• R950-highproductivityinawiderangeofsteels• R960-highproductivityinawiderangeofstainlesssteels,

cast iron and heat resistant materials• Superiorholeaccuracyandpreciserepeatabletolerances• SpecialTi-phoncoating

HyDRA DRIll HEADSHIgH PERFoRMAnCE HyDRA DRIllS WItH REPlACEABlE DRIll HEADS

h855 - 5XD BODYFEAtuREs:• Reductionininventory

costs - 1 drill body fits multiple head sizes

• Cylindricalshankwithflat for multi-purpose toolholding

• Allowsaccurateclampingfor reliable use of internal coolant

• Consistentlyhighperformance, even after numerous head changes

HyDRA DRIll BoDIES

• Internalcoolantchannelsprovide optimized coolant direction and pressure to give efficient chip evacuation and longer tool life


E3302 & E3304FEAtuREs:• E33022flutes,E33044flutes• Brightfinish

REgulAR lEngtH, SQuARE EnD Many more Precision Dormer

products are available. Go to

www.precisiondormer.com

to see their wide range of products,

then call our Customer Service team.

We will help you determine which

products are best for your

machining needs.

Drill bodies also available in3xD (fractional and metric shank) and 8xD (metric shank)

E3302

E3304

sIZELENGth OF Cut

OVERALL LENGth

E3302 - 2 FLutEs E3304 - 4 FLutEsORDER # pRICE ORDER # pRICE

1/16" 1/4" 1-1/2" 001000 $11.40 001100 $11.40 1/8" 1/2" 1-1/2" 001004 $9.93 001104 $9.93

3/16" 5/8" 2" 001008 $13.96 001108 $13.96 1/4" 3/4" 2-1/2" 001012 $16.78 001112 $16.78 3/8" 7/8" 2-1/2" 001017 $29.36 001117 $29.36 1/2" 1" 3" 001019 $47.02 001119 $47.02 5/8" 1-1/4" 3-1/2" 001021 $90.34 001121 $90.34 3/4" 1-1/2" 4" 001023 $132.94 001123 $132.94 7/8" 1-1/2" 4" 001024 $200.70 001124 $200.70 1" 1-1/2" 4" 001025 $209.43 001125 $209.43

DIAshANk

DIADRILLING

DEpthOVERALL LENGth

R950 DRILL hEADs

R960 DRILL hEADs

h855 FRACtIONAL shANk

h855 MEtRIC shANk

ORDER # pRICE ORDER # pRICE ORDER # pRICE ORDER # pRICE15/32" 5/8" 69.0mm 130.0mm 0010860 $98.96 0013472 $98.96 0033586 $391.65 0018460 $391.65 12mm 5/8" 69.0mm 130.0mm 0010877 $98.96 0013489 $98.96 0033586 $391.65 0018460 $391.65

1/2" 5/8" 69.0mm 130.0mm 0010914 $102.45 0013526 $102.45 0034095 $401.23 0018477 $401.23 17/32" 5/8" 74.0mm 140.0mm DOR-0010945 $102.45 0013557 $102.45 0034132 $555.22 0018484 $401.23 9/16" 3/4" 81.5mm 146.5mm DOR-0011003 $105.74 0016053 $105.74 0034699 $412.01 0018491 $412.01

15mm 3/4" 86.5mm 156.5mm 0011201 $109.85 0016084 $109.85 0034705 $422.79 0018507 $422.79 5/8" 3/4" 92.5mm 166.5mm 0011379 $112.93 0016121 $112.93 0034712 $433.57 0018514 $433.57

16mm 3/4" 92.5mm 166.5mm 0011386 $112.93 0016138 $112.93 0034712 $433.57 0018514 $433.57 11/16" 3/4" 97.5mm 171.5mm PTD-0012239 $99.88 0016190 $116.01 0034736 $443.15 0018521 $443.15

3/4" 1" 108.5mm 191.5mm 0012345 $124.22 0016879 $124.22 0034798 $462.31 0018545 $462.31 20mm 1" 114.5mm 196.5mm 0012413 $128.33 0017111 $128.33 DOR-0034804 $475.49 0018552 $475.49 13/16" 1" 119.5mm 196.5mm DOR-0012468 $131.40 0017197 $131.40 0034811 $485.07 0018569 $485.07

7/8" 1" 125.1mm 201.1mm 0012635 $136.54 0017371 $136.54 0034835 $494.65 0018576 $494.65 24mm 1" 135.2mm 220.2mm 0012727 $145.78 0017579 $145.78 0034859 $515.01 0018590 $515.01

1" 1-1/4" 140.0mm 225.0mm 0012833 $148.86 0017753 $148.86 0034866 $525.79 0018606 $525.79 1-1/16" 1-1/4" 151.0mm 235.0mm 0013243 $155.02 0018996 $155.02 0034897 $546.15 0018620 $546.15 1-1/8" 1-1/4" 157.0mm 240.0mm DOR-0013328 $159.12 0019054 $159.12 0034903 $556.93 0018637 $556.93

1-3/16" 1-1/4" 167.0mm 255.0mm 0013441 $167.34 0019115 $167.34 0034965 $576.09 0018651 $576.09 1-5/8" 1-1/2" 236.5mm 336.5mm 46104549 $448.62 - - 46111419 $1,182.13 42mm 1-1/2" 236.5mm 336.5mm 46104550 $448.62 - - 46111420 $1,182.13

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=PTD-001000




















http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=DOR-0010860












































































CARBIDE CuttIngSolID CARBIDE DRIllS

R453R457

sERIEs Mp-XFEAtuREs:• Excellentfordrillinginawiderangeofmaterials,

including steel, stainless steel, cast iron and more• TiAlNcoated,140o point with excellent centering

capabilities, common shanks to cut collet cost, available in solid or coolant thru

• Fractionalsizediameterrangeavailable1/8"-3/4"• Metricsizediameterrangeavailable3mmto20mm• ModelsR457andR458DIN6537K• ModelsR453andR454DIN6537L

HIgH PERFoRMAnCE, MultI-APPlICAtIon

shORt LENGth3xD

stD LENGth5xD

sERIEs CDXFEAtuREs:• Highperformance,heavydutydesign• Jobberlength• Parallelshank• TiNcoating• 130o split point

PREMIuM CoBAlt DRIllS

• DIN338• Fractionalsize

diameter range available 1/8" - 1/2"

• Metricsizediameterrange available 3mm to 14.25mm

sERIEs pFXFEAtuREs:

HIgH PERFoRMAnCE, JoBBER lEngtH

• Highperformance,heavydutyparabolic flute

• AlCrNcoated• 130o split notched point• DIN/ANSI

• Fractionalsizediameterrangeavailable 3/64" - 25/32"

• Metricsizediameterrangeavailable 1mm to 20mm

Need additional information? Check out our website

www.thomasskinner.com or call 1-866-999-3117.

DIAFLutE

LENGthOVERALL LENGth

R510 4xDORDER # pRICE

1/8" 36mm 65mm 0380802 $90.62 6mm 57mm 93mm 0115787 $100.69 5/16" 75mm 117mm 0380963 $128.92 3/8" 87mm 133mm 0381045 $140.22

10mm 87mm 133mm 0115558 $140.22 7/16" 94mm 142mm 0380987 $227.73

12mm 101mm 151mm 0115619 $203.27 1/2" 101mm 151mm 0381021 $230.56

DIAFLutE


A901 6xDORDER # pRICE

1/8" 41mm 70mm 0634912 $15.13 6mm 57mm 93mm 0048122 $28.03 5/16" 81mm 114mm 0635407 $51.27 3/8" 92mm 127mm 0635506 $61.39

10mm 87mm 133mm 0048641 $66.95 7/16" 103mm 140mm 0635599 $99.43

12mm 101mm 151mm 0049303 $105.77 1/2" 101mm 151mm 46073789 $123.72

sIZEFLutE


R458R457

COOLANt thRuORDER # pRICE ORDER # pRICE

1/8" 20mm 62mm 0624845 $58.72 0624432 $81.59 3/16" 28mm 66mm 0625033 $65.97 0624623 $89.12 1/4" 34mm 79mm 0624838 $79.33 0624425 $100.69

5/16" 41mm 79mm 0625156 $85.17 0624746 $111.98 3/8" 47mm 89mm 0625057 $111.98 0624647 $139.28

7/16" 55mm 102mm 0625187 $149.63 0624777 $184.45 1/2" 60mm 107mm 0624821 $198.56 0624418 $260.67

sIZEFLutE


R454R453

COOLANt thRuORDER # pRICE ORDER # pRICE

1/8" 28mm 66mm 0624029 $68.98 0623619 $97.87 3/16" 44mm 82mm 0624210 $77.73 0623800 $101.84 1/4" 53mm 91mm 0624012 $89.59 0623602 $121.40

5/16" 53mm 91mm 0624333 $103.52 0623923 $134.57 3/8" 61mm 103mm 0624234 $135.51 0623824 $167.51

7/16" 70mm 118mm 0624364 $171.27 0623954 $221.15 1/2" 76mm 124mm 0624005 $235.26 0623596 $312.43













































CARBIDE CuttIng


MFG # sIZEshANk

DIA ORDER # pRICE1/8" shankSM-41 1/8" 1/8" 74160 $7.80

SolID CARBIDE BuRRS

squARE END

CylInDRICAl

END Cut

BALL NOsE

ovAl (Egg)

14o InCluDED AnglE

RounD (BAll)

BAll DouBlE Cut

ConE FlAt

ROuNDtREE

pOINtED

MFG # sIZEshANk

DIA ORDER # pRICESA-43D 1/8 x 9/16" 1/8" GAR-74032 $7.80 SA-1D 1/4 x 5/8" 1/4" GAR-60022 $9.64 SA-3D 3/8 x 3/4" 1/4" GAR-60042 $14.52 SA-5D 1/2 x 1" 1/4" GAR-60062 $21.40 SA-6D 5/8 x 1" 1/4" GAR-60072 $25.92 SA-7D 3/4 x 1" 1/4" GAR-60082 $41.03

Aluminum cutSA-3A 3/8 x 3/4" 1/4" GAR-60041 $19.55 SA-5A 1/2 x 1" 1/4" GAR-60061 $27.73

MFG # sIZEshANk

DIA ORDER # pRICESB-3D 3/8 x 3/4" 1/4" GAR-60040E $17.02 SB-5D 1/2 x 1" 1/4" GAR-60062E $23.54 SB-6D 5/8 x 1" 1/4" GAR-60072E $28.52

Aluminum cutSA-3A 3/8 x 3/4" 1/4" GAR-60041E $21.50

MFG # sIZEshANk

DIA ORDER # pRICESC-42D 1/8 x 9/16" 1/8" GAR-74052 $7.80 SC-51D 1/4 x 1/2" 1/8" 73032 $13.17 SC-1D 1/4 x 5/8" 1/4" GAR-61022 $11.55 SC-3D 3/8 x 3/4" 1/4" GAR-61042 $15.74 SC-5D 1/2 x 1" 1/4" GAR-61062 $23.59 SC-6D 5/8 x 1" 1/4" GAR-61072 $31.50

Aluminum cutSC-3A 3/8 x 3/4" 1/4" GAR-61041 $27.26 SC-5A 1/2 x 1" 1/4" GAR-61061 $35.85

MFG # sIZEshANk

DIA ORDER # pRICESF-42D 1/8 x 1/2" 1/8" GAR-74092 $7.80 SF-1D 1/4 x 5/8" 1/4" GAR-64012 $12.60 SF-3D 3/8 x 3/4" 1/4" GAR-64022 $15.19 SF-5D 1/2 x 1" 1/4" GAR-64032 $22.76

MFG # sIZEshANk

DIA ORDER # pRICESD-1D 1/4" 1/4" GAR-62022 $12.26 SD-3D 3/8" 1/4" GAR-62042 $12.52 SD-5D 1/2" 1/4" GAR-62062 $18.77 SD-6D 5/8" 1/4" GAR-62072 $20.99

MFG # sIZEshANk

DIA ORDER # pRICESL-42D 1/8 x 1/2" 1/8" GAR-74152 $7.80 SL-1D 1/4 x 5/8" 1/4" GAR-69012 $12.60 SL-3D 3/8 x 1-1/16" 1/4" GAR-69032 $17.85 SL-4D 1/2 x 1-1/8" 1/4" GAR-69042 $21.70

MFG # sIZEshANk

DIA ORDER # pRICESG-43D 1/8 x 3/8" 1/8" GAR-74102 $7.80 SG-1D 1/4 x 5/8" 1/4" GAR-65012 $12.60 SG-3D 3/8 x 3/4" 1/4" GAR-65022 $16.21

SG-13D 1/2 x 3/4" 1/4" GAR-65032 $21.70 SG-5D 1/2 x 1" 1/4" GAR-65042 $22.44 SG-7D 3/4 x 1" 1/4" GAR-65062 $41.66

MFG # sIZEshANk

DIA ORDER # pRICESE-41D 1/8 x 7/32" 1/8" GAR-74082 $7.80 SE-41 1/8" 1/8" 74080 $7.80

SE-51D 1/4 x 3/8" 1/8" GAR-73052 $13.17 SE-1D 1/4 x 3/8" 1/4" GAR-63012 $12.60

MFG # sIZEshANk

DIA ORDER # pRICE1/8” steel shankSD-51D 1/4” 1/8” GAR-73042 $13.17 1/8” shankSD-41D 3/32” 1/8” GAR-74062 $7.80 SD-42D 1/8” 1/8” GAR-74072 $7.80










http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=GAR-60040E





































CARBIDE CuttIngBRAzED tool BItS

StylE AR & AlGRADEs:• 370formachiningsteel• 883formachiningcastiron

and non-ferrous materialsAppLICAtIONs:• Turning• Boring• Facing• Chamfering

StylE CGRADEs:• 370for

machining steel

AppLICAtIONs:




• Forming• Facing• Chamfering

• Turning• Grooving

StylE DpOINtED NOsE80o INCLuDED ANGLEGRADEs:• 370formachiningsteelAppLICAtIONs:• Turning• Boring• Undercutting• Chamfering

StylE EthREADING tOOLs60o INCLuDED ANGLEGRADEs:• 370formachiningsteelAppLICAtIONs:• Universalthreading• Notching• 30o Chamfering• Undercutting


API oIlFIElD tHREADIng & gRoovIngSince 1978 Tool-Flo has become a prime supplier of carbide inserts for threading, grooving, turning, milling and specials of various styles. Tool-Flo maintains and engineering department for the purpose of designing specials, and has a metalworking division for producing toolholders for standards and specials. Tool-Flo has a complete PVD coating facility for producing high quality PVD coatings. Strict controls are kept for quality with the ability to qualify all coatings.

Flo-Lock inserts are compatible with kennametal top Notch tooling and sandvik topLok tooling.

Contact your territory Manager or Customer service Representative for more details.

pRODuCts:• API• APIround• Chasers• Cut-off• Deepgrooving

• Facegrooving• Flo-LockandChip-Flo• Laydown• On-edge• Profiling

MFG #shANk

sIZE CARBIDE GRADE 370ORDER # pRICE(EA)

C4 1/4" AJH-52024 $4.87 C5 5/16" AJH-52052 $5.72 C6 3/8" AJH-52080 $5.97 C8 1/2" AJH-52136 $8.36

MFG #shANk

sIZEGRADE 370 LEFt hANDORDER # pRICE(EA)

AL4 1/4" AJH-50024 $4.70 AL5 5/16" AJH-50052 $5.78 AL6 3/8" AJH-50080 $5.65 AL7 7/16" AJH-50108 $5.79 AL8 1/2" AJH-50136 $7.38 AL10 5/8" AJH-50164 $10.60 AL12 3/4" AJH-50192 $13.06

MFG #shANk

sIZEGRADE 370

ORDER # pRICE(EA)D4 1/4" AJH-53024 $4.58 D6 3/8" AJH-53080 $6.01 D8 1/2" AJH-53136 $7.23 D12 3/4" AJH-53192 $14.77

MFG #shANk

sIZECARBIDE GRADE 370ORDER # pRICE(EA)

E4 1/4" AJH-53276 $4.58 E6 3/8" AJH-53332 $6.01 E8 1/2" AJH-53388 $7.23

MFG #shANk

sIZEGRADE 370 RIGht hAND GRADE 883 RIGht hAND

ORDER # pRICE(EA) ORDER # pRICE(EA)AR4 1/4" AJH-50524 $4.70 AR5 5/16" AJH-50552 $5.58 AJH-50535 $5.51 AR6 3/8" AJH-50580 $5.65 AJH-50563 $5.57 AR7 7/16" AJH-50608 $5.79 AR8 1/2" AJH-50636 $7.63 AR10 5/8" AJH-50664 $10.60 AJH-50647 $10.31 AR12 3/4" AJH-50692 $13.06

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=AJH-52024




























Carbide Cutting


Chamfer mills & spot drills

indexableFEatuREs:• Fujigen’sspeciallydesignedcarbideinsert

(pat.pend.)eliminatestheproblemsofchippingatthecentrepointcommonlyassociatedwithconventionalcentredrills

• Fujigen’suniquetoolholdingsystemassureshighaccuracyandsavestimewhenreplacinginserts

• Fujigen’ssinglebladesystemeliminatescuttingvibration

• Fujigenenablescentringandchamferingworktobedoneonthesamecentre

aPPLICatIONs:• Centredrilling• Cornerchamfering• Borechamfering• V-groovecutting SC1645C SC1630C

HOLDERs

INsERts

*ForholderSC1630C&SC1645Conly**ForholderSC1660Donly

***Multiplepriceby12togetpackageprice

Chamfering & Centre-drilling

MatERIaLs RPM IPM GRaDEMildsteels 3,000 3.2 NK2020Stainless 2,000 2 NK2020Diesteels 3,000 2 NK2020Castiron 3,200 8 NK1010

Aluminum 4,000 6 NK1010

MatERIaLs RPM IPM GRaDEMildsteels 3,000 8 NK2020Stainless 2,500 6 NK2020Diesteels 3,000 6 NK2020Castiron 3,000 8 NK1010

Aluminum 4,000 12 NK1010

RECOMMENDED sPEEDs & FEEDsForCentreDrillingandV-Grooving ForChamferMilling(DownCut)

nine9 Chamfer mills nC spot drill - n9mt11t3NC40• Generalpurpose,universalgradeforall

unhardenedsteelandcastiron• Eachinserthas4cuttingedges

NC10• Highpositiveangleandfullygroundcutting

edgeandreliefangle• UniversalgradeforAI,AI-alloy,non-ferrous

metalandstainlesssteel• Eachinserthas4cuttingedges

staRtER PaCkaGEs• Selectedpackagesforstarterswho

wantstotryNCSpotDrills• Includesoneinsertontoolholder

andfiveinsertsinthepocket• Shankø5/8"

DEsIGNED FOR usE IN HIGH sPEED MaCHININGFEatuREs:• Smallestinsertintheworldforchamferingmill• Smallestindexablecountersink,diameterø7mm• Theinsertisdual-reliefangle,speciallyhonedandoptimizedcoatedfor

highcuttingspeed• Optimizedthenumberofteethontheholdertoachievehigherfeedrate• ForfrontandbackchamferingEliminates2ndoperationorde-burringtime.

*Has2cuttingedges

MFG # ao L ØD Ød ORDER # PRICESC1630C 118o 3.27" .625" .625" SC1630C $426.13SC1645C 90o 3.35" .625" .500" LYN-SC1645C $264.15SC1660D 60o 3.75" .625" .472" SC1660D $292.81

FIGuRE INsERt INCLuDED HOLDER INCLuDED CONtENt ORDER # PRICE

2N9GX060204-NC2032 00-99616-C30&

00-99616-C40 2xholders+10inserts

+1key

00-99616-C3040-32 $627.73N9GX060204-NC9071 00-99616-C3040-71 $627.73

3N9GX090308-NC2032 00-99616-C50&

00-99616-C5200-99616-C5052-32 $731.87

N9GX090308-NC9071 00-99616-C5052-71 $731.87

FIGuRE Cmin Ø Cmax Ø sHaNk Ø Ød1 L Lc1 Lc3 Z ORDER # PRICE2 15(.590") 21(.827") 16(.630") 14(.551") 120 3.5 7.9 4 00-99616-C30 $218.532 19(.748") 25(.984") 20(.787") 18(.709") 130 3.5 7.9 4 00-99616-C40 $233.203 22(.866") 32(1.260") 20(.787") - 130 5.5 12.1 4 00-99616-C50 $247.87

MFG # INsERt INCLuDED ORDER # PRICE00-99616-14-IN6 N9MT11T3CT-NC40 CAL-6142024401 $225.00

00-99616-14-IN6AL N9MT11T3CT-NC10 614202-4402 $291.87

MFG # GRaDE COatING ORDER # PRICEN9MT11T3CT2T-H-NC40* K20F TiN CAL-014202 $28.00

N9MT11T3CT-NC40 P35 TiN CAL-014401 $28.00N9MT11T3CT-NC10 K10F TiAIN CAL-014402 $28.00

MFG # GRaDE aPPLICatION QtY/PkG ORDER # PRICEC22GUX NK1010 Aluminum,castiron 12*** LYN-C22GUXNK1010 $30.10C22GUX NK5050 Steels 12*** C22GUXNK5050 $39.25C32GUX NK1010 Aluminum,castiron* 1 LYN-C32GUXNK1010 $30.94C32GUX NK2020 Steels* 1 LYN-C32GUXNK2020 $29.07D43GUX NK1010 Aluminum,castiron** 12*** D43GUXNK1010 $56.90D43GUX NK5050 Steels** 12*** D43GUXNK5050 $75.28

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=LYN-SC1630C

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=LYN-SC1645C

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=LYN-SC1660D

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=CAL-0099616C304032


http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=NIN-0099616C505232

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=NIN-0099616C505271




http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=CAL-6142024401





http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=LYN-C22GUXNK1010




http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=LYN-D43GUXNK1010

http://www.thomasskinner.com/default.aspx?page=item+detail&itemcode=LYN-D43GUXNK5050


CARBIDE CuttIng

Documents

CARBIDE CuttIng - Welcome to Thomas Skinner! · CARBIDE CuttIng ORDER ONLINE @ 67 MFG # DIMENsIONs DC ORDER # DMM / DCsFMs LF Lu ApMX MAX RpM Coromant capto R390D -020C5-11L125 2