Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
DOUBLE & SINGLE CUTT5S 2H51/4” ShankCUTTING TOOLS
Carbide Burrs
Dear Customer,
Integrity Industrial offers Canada’s Finest Carbide Burrs, with the
best individual packaging available. Our burrs are balanced with the finest carbide available offering you and your customer the best value in the market. We have one of Canada’s largest selection of shapes and sizes, with great pricing, providing the best value available.
Integrity Annular Cutters are finely crafted to provided faster drilling and
longer life. Available in 1” & 2” length’s with the best individual
packaging available, our Annular Cutters provide excellent quality & value.
Thank You,
Derek Steil (Owner) Shannon Miller (Owner)
Welcome
V3CANADA'S FINEST
1
www.integrityindustrial.ca
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Carbide Burr Usage Guidelines
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
Carbide Burr Usage & Safety Guidelines Note: This is a guideline only, workers should follow all safety guidelines and safety standards on the jobsite as provided by the employer. Carbide Burrs are used at extreme speeds please follow guidelines to help reduce user error and Burr fatigue.
Pressure Avoid using so much pressure the grinder speed is reduced – this will cause
overheating and “chipping” of flutes reducing the life of your Burr causing possiblebreakage
Let the burr do the work and apply only a little pressure Initial contact with the work surface should be light to allow the Burr to “break-in” Do not “tap” or “Chatter” the Burr to the workpiece – this will cause chipping of flutes
or damage to brazing or breakage of the head For long shank Burrs, make sure the Burr is engaged to the workpiece before
spinning to avoid bending the shank
Movement & Contact Do not Drop the Burr or the grinder with the Burr inserted – this can cause damage to
the carbide causing breakage when applied to workpiece Carbide Burr’s should be stored safely from impact – keep in plastic original container
when not in use Constant movement over the work surface should be maintained –this will keep the
Burr from digging and jabbing into the material causing the Burr to catch and break Do Not “wedge” or jam the Burr into the workpiece – this will cause breakage or
Chipping Maximize the area of contact with the workpiece to improve finish Avoid contact between the workpiece and the shank of the Burr –this can cause tool
to overheat and weaken or even destroy the brazed joint
Speeds & Overheating Free run the burr every few minutes to allow the Burr to remain at a cooler
temperature to avoid overheating Maintain a High speed for efficient and economical use of a Carbide Burr
– at high speeds there is less tendency for chips to build in the flute, also the Burr willcut more freely in corners and pockets, and reduce the chances of jamming, bouncingor wedging.
CANADA'S FINEST CARBIDE BURRS
CANADA'S FINEST
2
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CARBIDE BURR SAFETY SUMMARY
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
Safety Summary Integrity Industrial Supply’s Carbide Burrs are made to the strictest standards and specifications and are designed to provide superior work performance and safe operation if used correctly.
Warning: Failure to observe safety precautions may result in tool breakage and or injury
Follow safety guidelines and safety standards as provided by employer -wearproper safety equipment such as face shield, hand protection, hearing protectionand lung protection
Ensure proper storage of Carbide Burr between usages by using original plasticcontainer
Do not use a “dull” burr this can cause operator to apply more pressure causingdamage to Burr, operator fatigue and damage to workpiece
Ensure burr shank is properly inserted into collet and clamped down tightly Ensure work piece is secured tightly and does not move Do not snag or jam your burr into the workpiece No excessive force Avoid contacting shank to workpiece DO NOT drop Burr or Grinder with the Burr in Collet Do not use a Burr with a bent shank Do not “tap” or “chatter” the burr on the workpiece Ensure Maximum power and RPM
Please see troubleshooting chart on the following page.
CANADA'S FINEST
3
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
TROUBLESHOOTING
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CARBIDE BURR TROUBLESHOOTING GUIDECarbide Burrs - Possible Causes and Solutions
Challenge
Exce
ssiv
e Fo
rce
Hea
t Fro
m R
ubbi
ng S
hank
Dul
l Flu
tes
Seiz
ed In
/Aga
inst
Wor
kpie
ceTo
ol D
ropp
edPo
or L
ocat
ion
in C
olle
tW
orn
Han
dpie
ce B
earin
gsBe
nt S
hank
Poor
Wor
king
Sta
bilit
yU
se C
oars
er G
eom
etry
Use
Fin
er G
eom
etry
Use
Dou
ble
Cut o
r Chi
pBr
eake
r Geo
met
rySo
ft M
ater
ial -
Lig
hten
Fee
dIn
crea
se R
PMs
Dec
reas
e RP
Ms
Avoi
d D
iam
ond
Cut
Use
Ant
i-stic
k co
mpo
und
Fast
er F
eed
Rate
Sl
ower
Fee
dA
bras
ive
Mat
eria
lPo
or S
et-U
p
Failu
re To
Sup
port
/ En
gage
Prio
r to
RPM
Braze Failure X X X X X
Poor Hand Control X X X X X X X
Chipping X X X X
Carbide Fracture X X X
Plugging X X X
Handpiece Vibration X X X X X
Poor Workpiece Finish X X X X X X X X X
Poor Tool Life X X X X X X X X X X X X X
Lack of AvailableHandpiece RPMs X X
Work Hardening of Workpiece X X X X X X
Severely Bent Shanks of Long Series Burs X X
X X
CANADA'S FINEST
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
RPM on every
CUTTING TOOLS
Carbide Burrs
Finest quality carbide available
Deep aggressive cut for fast product removal
Finely balanced
Part number on every shank
Precision cut on state of the art CNC machines
High Impact Plastic Case
Burr sits firmlyin place
Square tube offers impact protection
CANADA'S FINEST
5
shank
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
Carbide Burrs
DOUBLE CUTStandard Double Cut Burrs are the most common and offer very efficient stock removal. Double Cutburrs create small chips, good finish and excellentoperator control.
SINGLE CUTA general purpose burr designed for cast iron, copper, brass and other ferrous materials. It will give good material removal and nice work piece finishes. Single cut burrs produce long chips
FAST MILL CUTFast Mill cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading. Designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics, and other soft materials. The flutes are designed with a higfinish for easy chip flow and fast stock remova They also provide excellent work finish wit minimum loading when cutting soft, sticky metal.
Burr Speed RecommendationThe chart below is a general recommendation. Variations to achieve desired results may be necessary. Long Shank Burrs should be used at reduced speeds. Max RPM is different, please see the following pages.
Burr Diameter RPM1/8” Solid Carbide 45,000 - 50,0003/16” Solid Carbide 30,000 - 35,0003/16” Head Brazed to 1/8” Shank 30,000 - 35,0001/4” Head Brazed to 1/8” Shank 25,000 - 30,0001/4” Solid Carbide 30,000 - 35,0005/16” Head Brazed to 1/4” Shank 25,000 - 30,0003/8” Head Brazed to 1/4” Shank 25,000 - 30,0007/16” Head Brazed to 1/4” Shank 20,000 - 25,0001/2” Head Brazed to 1/4” Shank 20,000 - 25,0005/8” Head Brazed to 1/4” Shank 15,000 - 20,0003/4” Head Brazed to 1/4” Shank 15,000 - 20,0001” Head Brazed to 1/4” Shank 12,000 - 18,000
CANADA'S FINEST
6
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CUTTING TOOLS
Carbide Burrs DOUBLE & SINGLE CUT
1/4” Shank
SB CYLINDRICAL ENDCUTPart Number Dia. x Length SB14DC 3/16 x 3/8 SB1DC 1/4 x 5/8 SB1ADC 1/4 x 1 SB2DC 5/16 x 3/4 SB3DC 3/8 x 3/4 SB3SC 3/8 x 3/4 SB4DC 7/16 x 1 SB5DC 1/2 x 1 SB6DC 5/8 x 1 SB7DC 3/4 x 1 SB9DC 1 x 1
SD ROUNDPart Number Dia. SD11DC 1/8SD14DC 3/16SD1DC 1/4SD2DC 5/16SD3DC 3/8SD4DC 7/16SD5DC 1/2SD6DC 5/8SD7DC 3/4SD9DC 1
SA CYLINDRICALPart Number Dia. x Length SA12DC 1/8 x 5/8 SA14DC 3/16 x 5/8 SA1DC 1/4 x 5/8 SA1SC 1/4 x 5/8 SA1ADC 1/4 x 1 SA2DC 5/16 x 3/4 SA3DC 3/8 x 3/4 SA3SC 3/8 x 3/4 SA4DC 7/16 x 1 SA5DC 1/2 x 1 SA5SC 1/2 x 1 SA6DC 5/8 x 1 SA16DC 3/4 x 3/4 SA7DC 3/4 x 1 SA9DC 1 x 1
SC CYLINDRICAL BALLNOSEPart Number Dia. x Length SC12DC 1/8 x 5/8 SC14DC 3/16 x 5/8 SC1DC 1/4 x 5/8 SC1ADC 1/4 x 1 SC2DC 5/16 x 3/4 SC2ADC 5/16 x 1 SC3DC 3/8 x 3/4 SC3SC 3/8 x 3/4 SC4DC 7/16 x 1 SC5DC 1/2 x 1 SC5SC 1/2 x 1 SC6DC 5/8 x 1 SC7DC 3/4 x 1 SC9DC 1 x 1
Max RPM90,00075,000
45,00040,00035,00035,00028,00020,000
55,00055,00055,00048,00045,000
20,00018,000
Max RPM75,00055,000
35,00028,00020,00018,000
55,00048,00045,00045,00040,000
Max RPM90,00075,000
45,00040,00035,00035,00028,00020,000
55,00055,00048,00048,00045,000
18,000
Max RPM90,00075,000
28,00020,00018,000
55,00048,00045,00040,00035,000
CANADA'S FINEST
7
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Carbide Burrs DOUBLE & SINGLE CUT
1/4” Shank
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
SE OVALPart Number Dia. x LengthSE1DC 1/4 x 3/8SE3DC 3/8 x 5/8SE5DC 1/2 x 7/8SE6DC 5/8 x 1SE7DC 3/4 x 1
SF TREE SHAPE RADIUS ENDPart Number Dia. x LengthSF1DC 1/4 x 5/8SF1ADC 1/4 x 3/4SF3DC 3/8 x 3/4SF4DC 7/16 x 1SF13DC 1/2 x 3/4SF5DC 1/2 x 1SF6DC 5/8 x 1SF7DC 3/4 x 1SF15DC 3/4 x 1-1/2
SG1DC SG2DC 5/16 x 3/4SG3DC 3/8 x 3/4SG13DC 1/2 x 3/4SG5DC 1/2 x 1SG6DC 5/8 x 1SG7DC 3/4 x 1SG15DC 3/4 x 1-1/2
SH FLAMEPart Number Dia. x LengthSH1DC 1/4 x 1/2SH2DC 5/16 x 3/4SH5DC 1/2 x 1-1/4SH6DC 5/8 x 1-7/16SH7DC 3/4 x 1-5/8
SJ 60° CONEPart Number Dia. x LengthSJ3SC 3/8 x 1/4SJ5SC 1/2 x 7/16SJ6SC 5/8 x 1/2SJ7SC 3/4 x 5/8SJ9SC 1 x 3/4
SK 90° CONEPart Number Dia. x LengthSK3SC 3/8 x 3/16SK5SC 1/2 x 1/4SK6SC 5/8 x 5/16SK7SC 3/4 x 3/8SK9SC 1 x 1/2
Max RPM55,00045,00035,00028,00020,000
Max RPM55,00055,000
20,00020,000
45,00040,00045,00040,00028,000
SG TREE SHAPE POINTED END
48,000
20,000
45,00035,00035,00028,00020,000
Max RPM55,00048,00035,00028,00020,000
Max RPM45,00035,00028,00020,00018,000
Max RPM45,00035,00028,00020,00018,000
Part Number Dia. x Length Max RPM1/4 x 5/8 55,000
CANADA'S FINEST
8
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Part Number Dia. x Length Angle
CUTTING TOOLS
SL 14° TAPER SHAPE RADIUS END
SL1DC 1/4 x 5/8SL2DC 5/16 x 7/8SL3DC 3/8 x 1-1/16SL4DC 1/2 x 1-1/8SL6DC 5/8 x 1-5/16SL7DC 3/4 x 1-1/2
SN INVERTED CONE
SN1EDC 1/4 x 5/16 10°SN2DC 3/8 x 3/8 13°SN3DC 1/2 x 1/2 28°SN3EDC 1/2 x 1/2 28°SN6DC 5/8 x 3/4 18°SN7DC 3/4 x 5/8 30°
FLAT DISCPart Number Dia. x LengthX261SCF 1/4 x 3/32X262SCF 5/16 x 3/32X263SCF 3/8 x 1/8X264SCF 1/2 x 1/8X265SCF 5/8 x 1/8X266SCF 3/4 x 5/32X267SCF 7/8 x 5/32
SM CONE
SM2DC 1/4 x 3/4 14°SM3DC 1/4 x 1 10°SM4DC 3/8 x 5/8 28°SM5DC 1/2 x 7/8 28°SM6DC 5/8 x 1 31°
Carbide Burrs DOUBLE & SINGLE CUT
1/4” Shank
Max RPM55,00048,00045,00035,00028,00020,000
Part Number Dia. x Length Angle SM2DC 1/4 x 3/4 14°
Max RPM Max RPM55,00055,00045,00035,00035,00028,00020,000
SN1DC 1/4 x 5/16 10° 55,00048,00045,00035,00028,00020,00019,000
Part Number Dia. x Length Max RPM55,00055,00055,00045,00035,00028,000
CANADA'S FINEST
9
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Carbide Burrs DOUBLE CUT
1/8” Shank
SA CYLINDRICALPart Number Dia. x LengthSA41DC 1/16 x 1/4SA42DC 3/32 x 7/16SA43DC 1/8 x 9/16SA51DC 1/4 x 1/2SA53DC 3/16 x 1/2
SC CYLINDRICAL BALLNOSEPart Number Dia. x LengthSC41DC 3/32 x 7/16SC42DC 1/8 x 9/16SC51DC 1/4 x 1/2
SD ROUNDPart Number Dia. SD41DC 3/32SD42DC 1/8SD51DC 1/4SD53DC 3/16
SE OVALPart Number Dia. x LengthSE41DC 1/8 x 1/4SE51DC 1/4 x 3/8
SF TREE SHAPE RADIUS ENDPart Number Dia. x LengthSF42DC 1/8 x 1/2SF51DC 1/4 x 1/2SF53DC 3/16 x 1/2
SG TREE SHAPE POINTED END
SG43DC 1/8 x 3/8SG44DC 1/8 x 1/2SG51DC 1/4 x 1/2
SL TAPER SHAPE RADIUS END
SL42DC 1/8 x 1/2 8° SL53DC 3/16 x 1/2 14°
SM CONEPart Number Dia. x Length Angle
SM42DC 1/8 x 7/16 14°SM43DC 1/8 x 5/8 7°
SN INVERTED CONEPart Number Dia. x Length Angle
SB CYLINDRICAL END CUTPart Number Dia. x LengthSB51DC 1/4 x 3/16
SH FLAMEPart Number Dia. x LengthSH41DC 1/8 x 1/4
Part Number Dia. x Length
SL41DC 1/8 x 3/8 8° Part Number Dia. x Length Angle
Max RPM90,00090,00090,00055,00075,000
Max RPM90,00090,00055,000
Max RPM90,00055,000
Max RPM90,00090,00055,000
Max RPM90,00090,00075,000
Max RPM55,000
Max RPM90,00090,00055,00075,000
Max RPM90,00055,00075,000
Max RPM90,000
Max RPM90,00090,00090,000
12°1/8 x 11/32 SM41DC
Max RPM90,00010°1/8 x 3/16 SN42DC
CANADA'S FINEST
10
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CUTTING TOOLS
Carbide Burrs DOUBLE CUT
1/4” x 6” Shank
SD ROUNDPart Number Dia. x ShankSD1DC6 1/4 x 6SD3DC6 3/8 x 6SD5DC6 1/2 x 6
SE OVALPart Number Dia. x L x ShankSE1DC6 1/4 x 3/8 x 6SE3DC6 3/8 x 5/8 x 6SE5DC6 1/2 x 7/8 x 6
SF TREE SHAPE RADIUS ENDPart Number Dia. x L x ShankSF1DC6 1/4 x 5/8 x 6SF3DC6 3/8 x 3/4 x 6SF5DC6 1/2 x 1 x 6
SB CYLINDRICAL ENDCUTPart Number Dia. x L x ShankSB1DC6 1/4 x 5/8 x 6SB3DC6 3/8 x 3/4 x 6SB5DC6 1/2 x 1 x 6
SA CYLINDRICAL Part Number Dia. x L x ShankSA1DC6 1/4 x 5/8 x 6SA3DC6 3/8 x 3/4 x 6SA5DC6 1/2 x 1 x 6
SC CYLINDRICAL BALLNOSEPart Number Dia. x L x ShankSC1DC6 1/4 x 5/8 x 6SC3DC6 3/8 x 3/4 x 6SC5DC6 1/2 x 1 x 6
Max RPM35,00033,00025,000
Max RPM35,00033,00025,000
Max RPM35,00033,00025,000
Max RPM35,00033,00025,000
Max RPM35,00033,00025,000
Max RPM35,00033,00025,000
CANADA'S FINEST
11
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Carbide Burrs DOUBLE CUT
1/4” x 6” Shank
SG TREE SHAPE POINTED END
SG1DC6 1/4 x 5/8 x 6SG3DC6 3/8 x 3/4 x 6SG5DC6 1/2 x 1 x 6
SH FLAMEPart Number Dia. x L x ShankSH1DC6 1/4 x 1/2 x 6SH5DC6 1/2 x 1-1/4 x 6
SL TAPER SHAPE RADIUS END
SL1DC6 1/4 x 5/8 x 6SL3DC6 3/8 x 1-1/16 x 6SL4DC6 1/2 x 1-1/8 x 6
SM CONEPart Number Dia. x L x ShankSM1DC6 1/4 x 1/2 x 6SM5DC6 1/2 x 7/8 x 6
Part Number Dia. x L x Shank Max RPM35,00033,00025,000
Part Number Dia. x L x Shank Max RPM35,00033,00025,000
Max RPM35,00025,000
Max RPM35,00025,000
CANADA'S FINEST
12
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CUTTING TOOLS
Carbide Burrs FAST MILL CUT
1/4” Shank
SA CYLINDRICALPart Number Dia. x Length SA1FMC 1/4 x 5/8 SA3FMC 3/8 x 3/4 SA5FMC 1/2 x 1
SB CYLINDRICAL ENDCUTPart Number Dia. x Length SB3FMC 3/8 x 3/4 SB5FMC 1/2 x 1
SC CYLINDRICAL BALLNOSEPart Number Dia. x Length SC1FMC 1/4 x 5/8 SC3FMC 3/8 x 3/4 SC5FMC 1/2 x 1
SD ROUNDPart Number Dia. SD3FMC 3/8SD5FMC 1/2
SE OVALPart Number Dia. x Length SE3FMC 3/8 x 5/8 SE5FMC 1/2 x 7/8
SF TREE SHAPE RADIUS ENDPart Number Dia. x Length SF3FMC 3/8 x 3/4 SF5FMC 1/2 x 1
SG TREE SHAPE POINTED END
SG3FMC 3/8 x 3/4 SG5FMC 1/2 x 1
SL TAPER SHAPE RADIUS END
SL3FMC 3/8 X 1-1/16 SL4FMC 1/2 X 1-1/8
Part Number Dia. x Length Part Number Dia. x Length
45,00035,000
Max RPM55,000
35,000
Max RPM45,000
35,000
Max RPM45,000
45,00035,000
Max RPM55,000
35,000
Max RPM45,000
35,000
Max RPM45,000
35,000
Max RPM45,000
35,000
Max RPM45,000
CANADA'S FINEST
13
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Carbide Burrs SETS
1/4” Shank
Part Number Head Size 000 0148 1/4”
Contains: SA1DC, SC1DC, SD1DC, SE1DC, SF1DC, SG1DC, SL1DC, SM1DC
Part Number Head Size 000 0128 1/2”
Contains: SA5DC, SC5DC, SD5DC, SE5DC, SF5DC, SG5DC, SL4DC, SM5DC
Part Number Head Size 000 0388 3/8”
Contains: SA3DC, SC3DC, SD3DC, SE3DC, SF3DC, SG3DC, SL3DC, SM4DC
Part Number Head Size 000 0038 1/4”, 3/8”, 1/2”
Contains: SA5DC, SC1DC, SD3DC, SE5DC, SF1DC, SG3DC, SL3DC, SM1DC
CANADA'S FINEST
14
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CUTTING TOOLS
14
Carbide Burrs SETS
1/4” Shank
Part Number Head Size 000 0386 3/8” Contains: SA3FMC, SC3FMC, SD3FMC, SE3FMC, SF3FMC, SG3FMC
Part Number Head Size 000 0126 1/2” Contains: SA5FMC, SC5FMC, SD5FMC, SE5FMC, SF5FMC, SG5FMC
CANADA'S FINEST
15
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Carbide Burrs MASTER DISPLAY
1/4” Shank
This Master Carbide Burr Display showcases 30 of the most common shapes and sizes available. The 30 burrs are enclosed in the front, for permanent visual identification and comes with another 60 burrs for resale. This display would be a perfect addition to any tool crib, as it has the capacity to hold up to 300 mixed burr sizes.
Part Number Size (W x D x H) 000 0006 8-1/2” x 8-1/2” x 11”
Contains (2 of each): SA1DC, SA3DC, SA5DC, SB1ADC, SB3DC, SB5DC, SC1DC, SC3DC, SC5DC, SD1DC, SD3DC, SD5DC, SE3DC, SE5DC, SF1DC, SF3DC, SF5DC, SG1DC, SG3DC, SG5DC, SH2DC, SJ3SC, SK3SC, SL1DC, SL3DC, SL4DC, SM1DC, SM4DC, SN1EDC, SN3DC
CANADA'S FINEST
16
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CUTTING TOOLS
Carbide Burrs SETS DISPLAY
This Set Display showcases the 6 sets available. The sets are enclosed with a locking sliding lid and lock is provided.
Part Number Size (W x D x H) 000 0007 21-1/2” x 15” x 11-1/2”
Interior walls designed for easy
slug ejection
CANADA'S FINEST
17
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Annular Cutters
Precision designed flutesdrill faster, reducing required horsepower
Double action teeth provide fast, smooth cuts and less chatter
Interior walls designed for easy
slug ejection
Long-lasting reusable tube
Two flats for cuttermounting
Impact resistant tube
Easy identificatio
CANADA'S FINEST
18
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
CUTTING TOOLS
Annular Cutters 1” Length
ANNULAR CUTTERS M2HSS-1” LENGTH
Part Number Description 220 1000 7/16 x 1 220 1001 1/2 x 1 220 1002 9/16 x 1 220 1003 5/8 x 1 220 1004 11/16 x 1 220 1005 3/4 x 1 220 1006 13/16 x 1 220 1007 7/8 x 1 220 1008 15/16 x 1 220 1009 1 x 1 220 1010 1-1/16 x 1 220 1011 1-1/8 x 1 220 1012 1-3/16 x 1 220 1013 1-1/4 x 1 220 1014 1-5/16 x 1 220 1015 1-3/8 x 1 220 1016 1-7/16 x 1 220 1017 1-1/2 x 1 220 1018 1-9/16 x 1 220 1019 1-5/8 x 1 220 1020 1-11/16 x 1 220 1021 1-3/4 x 1 220 1022 1-13/16 x 1 220 1023 1-7/8 x 1 220 1024 1-5/16 x 1 220 1025 2 x 1
Pilot pins for 1” Annular Cutters: 220 1035 7/16” x 1”,
4.74mm x 77mm
220 1040 1/2” & Larger x 1”, 6.34mm x 77mm)
CANADA'S FINEST
19
Integrity Industrial Supply Ltd. www.integrityindustrial.ca
Integrity Industrial Supply Ltd. Tel: 780.444.0002 Toll Free Tel: 1.877.625.0002 Fax: 780.800.0055
CUTTING TOOLS
Annular Cutters 2” Length
ANNULAR CUTTERS M2HSS-2” LENGTH
Part Number Description 220 2000 7/16 x 2 220 2001 1/2 x 2 220 2002 9/16 x 2 220 2003 5/8 x 2 220 2004 11/16 x 2 220 2005 3/4 x 2 220 2006 13/16 x 2 220 2007 7/8 x 2 220 2008 15/16 x 2 220 2009 1 x 2 220 2010 1-1/16 x 2 220 2011 1-1/8 x 2 220 2012 1-13/16 x 2 220 2013 1-1/4 x 2 220 2014 1-15/16 x 2 220 2015 1-3/8 x 2 220 2016 1-7/16 x 2 220 2017 1-1/2 x 2 220 2018 1-9/16 x 2 220 2019 1-5/8 x 2 220 2020 1-11/16 x 2 220 2021 1-3/4 x 2 220 2022 1-13/16 x 2 220 2023 1-7/8 x 2 220 2024 1-15/16 x 2 220 2025 2 x 2 220 2026 2-1/16 x 2 220 2027 2-1/8 x 2 220 2028 2-3/16 x 2 220 2029 2-1/4 x 2 220 2030 2-5/16 x 2 220 2031 2-3/8 x 2
Pilot pins for 2” Annular Cutters: 220 2035 7/16” x 2”,
4.74mm x 102mm 220 2040 1/2” & Larger x 2”,
6.34mm x 102mm)CANADA'S FINEST
20
Integrity Industrial Supply Ltd. www.integrityindustrial.ca