Capture+Review SP8002 - AB Dynamics ?· 2018-01-16 · from up to four camera or screen capture sources,…

  • Published on
    04-Jul-2018

  • View
    212

  • Download
    0

Embed Size (px)

Transcript

  • Capture+Review SP8002

    Outline specification

    INTRODUCTION AB Dynamics Capture+Review offers an integrated video capture solution for vehicle testing. Video can be recorded from up to four camera or screen capture sources, and combined with data channels from an AB Dynamics driving robot. The video is stored with an embedded synchronisation to the recorded data, meaning that no subsequent user synchronisation is needed.

    Video of tests can then be played back while reviewing results data graphically alongside the video.

    Capture+Review is an additional software module combined with USB cameras that is available for use with any AB Dynamics Robot Controller. Two HD (1080p) USB webcams are included with mounting hardware to facilitate installation in the vehicle.

    OVERVIEW For use with any AB Dynamics Robot Controller

    Customisable video layout with up to four sources (cameras and screen capture)

    Allows user-selected data channels to be overlaid on the video

    Allows precise evaluation of vehicle or ADAS performance

    Perfect for video documentation and evidence of vehicle testing

    AUTOMATIC RECORDING After a simple one-time software setup,

    Capture+Review automatically starts and stops the

    video recording when robot data capture begins and

    ends. Filenames are automatically created to keep the

    videos organised and referenced to the test run.

  • Email: info@abd.uk.com Tel: +44 (0)1225 860 200 Web: www.abd.uk.com

    RELEASE DATE 8th June 2017

    GET IN TOUCH Anthony Best Dynamics Ltd Middleton Drive Bradford on Avon Wiltshire BA15 1GB England

    ISSUE No. 03

    SYNCHRONISED DATA REVIEW Viewing results in the Robot Controller software while Capture+Review is running automatically loads the

    corresponding video(s).

    Videos can be played back in real time while crosshairs on the graphs move in synchronisation. In addition, the

    cursor can be dragged to pinpoint areas of interest.

    HARDWARE

    Two cameras are included, each with vacuum mount and clamp hardware. A third camera can be supplied

    optionally. The cameras are 1080p HD-capable but this requires a powerful PC; we find that the system operates

    reliably with cameras set to 720p and 30fps on most PCs.

    SIDE BY SIDE COMPARISON Loading multiple results in the RC software also opens each corresponding video, enabling side by side comparison

    of test runs.

    Coupled with the Robot Controller data plotting utility, this provides a powerful test data analysis tool.

    mailto:info@abd.uk.com