Capitol catalog EN 2014 - Sisteme fixare

FIXING SYSTEMS

FIXING SYSTEMS

Dowels

Screws

Anchors

Fixing Systems

TECHNICAL CHARACTERISTICS

Minimum yield strength Nm

TOLERANCE MARGIN 3%

WEIGHT*Weight Weight

Code Product name Pcs/box

280017 Metal nail dowel type YP 6x40 200















280000 Self-tapping screw for drywall 3.5x25 1000







METAL NAIL DOWEL

DRYWALL SCREW, FULL FINE THREAD (FOR METAL).

� Philips No2 Countersunk screw, M=4,5-5, 1.

� Thread: fine, full/incomplete, two-starts thread.

� Point: sharp. � Coating: grey, phosphate-plated. � Material: steel C1018, C1022. � Core hardness: 290-450 HV. � Surface hardness: 550-720 HV.

� Flanged dowel with metal screw and hammer fixing. Fast fixing; it can be disassembled.

Fixing Systems

www.temad.ro176

Weight


WEIGHT*

4,2x70 4,30

Weight

TOLERANCE MARGIN 3%



Weight

TOLERANCE MARGIN 3%


280371 Self-tapping screw for drywall wood, thread 3.5x25 1000





280005 Self-drilling screw for drywall 3.5x25 1000




DRYWALL SCREW, FULL COARSE THREAD (FOR WOOD)

DRYWALL SCREW FOR METAL PROFILES OF UP TO 2 MM THICK

� Philips No2 Countersunk screw, M=4,5-5, 1.

� Thread: full/incomplete, coarse. � Point: sharp. � Coating: grey, phosphate-plated. � Material: steel C1018, C1022. � Core hardness: 290-450 HV. � Surface hardness: 550-720 HV.

� Philips No2 countersunk screw, M=4,5-5, 1. � Thread: fine. � Point: self-drilling No2. � Coating: white zinc- or phosphate-plated. � Thread length Lt - full. � Max. torque: 2.80 Nm (3.5x); 4.59 Nm (4.2x). � Material: Steel C1022, C1018. � Core hardness: 270-425 HV. � Surface hardness: 560 MIN HV.

Fixing Systems

email: [email protected] 177


TOLERANCE MARGIN 3%

Weight


Weight

TOLERANCE MARGIN 3%


280359 Flat head self-drilling screw + washer 4.2x16 1000

280279 Flat head self-drilling screw + washer 4.2x19 1000


280009 Self-drilling screw metal profiles zn 3.5x9.5 1000

SCREW FOR FIXING AND FASTENING METAL AND METAL PROFILES WITH A THICKNESS OF UP TO 2 MM

SCREW FOR FIXING AND FASTENING BOARDS AND METAL PROFILES WITH A THICKNESS OF UP TO 2 MM � Philips no. 2 flat head screw and washer:

M = 4,5-5,1. � Thread: fine. � Point: self-drilling. � Coating: white zinc-plated. � Thread length Lt - full. � Minimum yield strength: 4.5 Nm. � Core hardness: 240-425 HV. � Surface hardness: 560 MIN HV. � Material: steel C1022.

� Philips No2 round head screw. � Thread: full. � Point: self-drilling. � Coating: white zinc- or phosphate-plated. � Thread length Lt - full. � Minimum yield strength: 3.5 Nm. � Core hardness: 240-425 HV. � Surface hardness: 550 MIN HV. � Recommended fastening speed: 2500 rev/min. � Material: steel C1 022.

Fixing Systems

www.temad.ro178

Weight


Thread lengthTolerance

TOLERANCE MARGIN 3%


SELF-DRILLING SCREW FOR SHEET-METAL, REDUCED POINT, THREAD FOR WOOD AND EPDM WASHER 2.4-2.8 mm thick

� Flanged hexagonal head, for the 8 mm wrench. � Thread: coarse. � Point: self-drilling (reduced). � Coating: white zinc-plated. � Additional colours: RAL range. � Core hardness: 240-425 HV. � Surface hardness: MIN 560 HV. � Material: steel C1 022. � Maximum torque: 65kg/cm (6 ,5 Nm). � Maximum thickness of used board/profile: 3mm.


280152 Hex head screw red. pt. no washer zn 4.8x38 500

280238 Hex head screw red. pt. and washer zn 4.8x25 250





516199 Self-drilling screw for sheet metal ZN 4.8x20 WFD OC ARG SY 250

280409 Self-drilling screw for sheet metal 4.8x25 RAL3011 SY 250

517363 Self-drilling screw for sheet metal 4.8X35 RAL6005 SY 100

515921 Self-drilling screw for sheet metal 4.8x35 RAL3011 SY 250

517368 Self-drilling screw for sheet metal 4.8x35 RAL5010 250

515922 Self-drilling screw for sheet metal 4.8x35 RAL8017 250

517438 Self-drilling screw for sheet metal 4.8x50 8017 SY 100

SO

SO

SO

SO

SO

SO

SO

SO

= VALID BY SPECIAL ORDERSO

SELF-DRILLING SCREW FOR FIXING BOARDS AND STANDARD METAL PROFILES DIN-EN ISO 15480 (OLD· DIN 7504-K)

� Flanged hexagonal head, for wrench no. 8 (4.8 x M 5.5X) or 10 (6.3x) mm.

� Thread: fine. � Point: self-drilling. � Coating: white zinc-plated. � Core hardness: 270-425 HV. � Surface hardness: MIN 560 HV. � Material: steel C1 022. � Maximum thickness of used board/profile: 4.8 = 4.1 mm; 5.5 = 5.3mm; 6.3 = 6.5mm.

� Maximum torque: 4.8 =67 kg/cm (6.7 Nm); 5.5 = 102 kg/cm (10.2 Nm); 6.3 = 143 kg/cm (14.3 Nm).


280251 Hex head screw norm pt no washer zn 5.5x25 400SO


Fixing Systems


Dimension 3,9x13 3,9x16 3,9x19 3,9x22 3,9x25 3,9x32 3,9x35L, mm 12,3-13,7 15,3-16,7 18,3-19,7 21,3-22,7 24,3-25,7 31,3-32,7 34,3-35,7U, mm 0,8 0,8 0,8 0,8 0,8 0,8 0,8Q, mm 2,03-2,53 2,03-2,53 2,03-2,53 2,03-2,53 2,03-2,53 2,03-2,53 2,03-2,53A, mm 7,14-7,50 7,14-7,50 7,14-7,50 7,14-7,50 7,14-7,50 7,14-7,50 7,14-7,50P, mm 1,3-1,4 1,3-1,4 1,3-1,4 1,3-1,4 1,3-1,4 1,3-1,4 1,3-1,4D, mm 3,75-3,91 3,75-3,91 3,75-3,91 3,75-3,91 3,75-3,91 3,75-3,91 3,75-3,91d, mm 2,76-2,92 2,76-2,92 2,76-2,92 2,76-2,92 2,76-2,92 2,76-2,92 2,76-2,92Dp, mm 3,05-3,20 3,05-3,20 3,05-3,20 3,05-3,20 3,05-3,20 3,05-3,20 3,05-3,20H, mm 2,4-2,5 2,4-2,5 2,4-2,5 2,4-2,5 2,4-2,5 2,4-2,5 2,4-2,5T, mm 4,5-5,5 4,5-5,5 4,5-5,5 4,5-5,5 4,5-5,5 4,5-5,5 4,5-5,5Weight 1000buc., kg 0,90 1,07 1,26 1,43 1,50 1,98 2,16


TOLERANCE MARGIN 3%


280370 White zinc-plated EPDM washer 4.8x12.7 500

280420 White zinc-plated EPDM washer 4.8x14 500

EPDM RUBBER MEMBRANE WASHER

� The EPDM rubber membrane washer is made of ethylene, propylene, diene, methylene.

� Only used with screw. When colouring the screw, the metal part of the washer is coloured the same colour as the screw.

� Coating of metal part: white zinc-plating. � Membrane material: neoprene or EPDM. E - ethylene, P- propylene, D - diene, M - methylene

� EPDM membrane thickness: 2.4- 2.8mm.


Weight pcs.,

TOLERANCE MARGIN 3% Code Product name Pcs/box

280012 Self-drilling screw for windows zn 3.9x16 1000





SELF-DRILLING SCREW FOR PVC PROFILES (SELF-DRILLING SCREW FOR WINDOWS)

� Self-drilling countersunk screw, Philips head No2, M=4,5-5,1.

� Thread: fine. � Point: self-drilling. � Coating: white or yellow zinc-plated. � Thread length Lt - full. � Minimum yield strength: 3.4 Nm. � Core hardness: 240-425 HV. � Surface hardness: MIN 560 HV. � Recommended fastening speed: 2500 rev/min. � Material: steel C1022.

Fixing Systems

www.temad.ro180

7,5x72 7,5x92 7,5x1 12 7,5x132 7,5x152 7,5x182 7,5x202D, mm 7,35-7,65 7,35-7,65 7,35-7,65 7,35-7,65 7,35-7,65 7,35-7,65 7,35-7,65D1, mm 6,30-6,70 6,30-6,70 6,30-6,70 6,30-6,70 6,30-6,70 6,30-6,70 6,30-6,70d, mm 5,15-5,45 5,15-5,45 5,15-5,45 5,15-5,45 5,15-5,45 5,15-5,45 5,15-5,45P, mm 2,55-2,75 2,55-2,75 2,55-2,75 2,55-2,75 2,55-2,75 2,55-2,75 2,55-2,75A, mm 10,82-11,8 10,82-11,8 10,82-11,8 10,82-11,8 10,82-11,8 10,82-11,8 10,82-11,8K, mm 3,30-3,40 3,30-3,40 3,30-3,40 3,30-3,40 3,30-3,40 3,30-3,40 3,30-3,40Q, mm 2,50-2,80 2,50-2,80 2,50-2,80 2,50-2,80 2,50-2,80 2,50-2,80 2,50-2,80L, mm 70-74 90-94 110-114 130-134 150-154 180-184 200-204Li, mm 28-35 28-35 28-35 28-35 28-35 28-35 28-35Weight 1000buc., kg 14,00 18,00 22,00 26,30 30,30 36,20 36,20


TOLERANCE MARGIN 3%


280191 Concrete screw zng 7.5x72 100






SCREW FOR THE INSTALLATION OF DOORS AND WINDOWS (INTO CONCRETE WALLS)

� Slit countersunk head for a better fixing, Torx No 30 head. � thread: hi-low diameter on Li. � Point: self-tapping. � Coating: white zinc-plated. � Thread length Lt - full. � Maximum torque: 25.00 Nm. � Core hardness: 320-410 HV. � Surface hardness: MIN 450-750 HV. � Minimum tear strength (concrete 825): 2.50 KN. � Material: steel C1022.

Fixing Systems


3,0 (12-40) 3,5 (12-50) 4,0 (12-70) 4, 5 (16-80) 5,0 (20-120) 6,0 (40-200)A, mm 5,65-6,00 6,60-7,00 7,60-8,00 8,60-9,00 9,60-10,00 11,50-12,00H, mm 2,80-3,15 3,00-3,60 3,80-4,15 4,40-4,74 5,00-5,30 5,90-6,05D, mm 2,78-3,05 3,25-3,50 3,75-4,05 4,30-4,55 4,75-5,05 5,80-6,05d, mm 1,60-1,93 2,00-2,30 2,40-2,50 2,60-2,80 2,80-3,10 3,60-4,00P, mm 1,35 1,60 1,80 2,00 2,20 2,60Q, mm 1,60-2,10 1,76-2,16 2,05-2,50 2,45-3,00 2,85-3,40 3,00-3,55M, mm 3,0 4,0 4,4 4,8 5,3 6,3Şliţ Pz1 Pz2 Pz2 Pz2 Pz2 Pz3

1,5 2,0 3,0 4,3 6,2 10,8L Thread length, mm 0,75-1,2 0,75-1,2 0,75-1,45 0,85-1,45 1,0-1,7 1,2-1,9

L L,mm <80 80 90 100 >100Lt, mm complete 60 60 60 70

LENGHT DEPENDING ON THE LENGTH OF THE SCREW THREAD



UNIVERSAL SCREW FOR WOOD (AND OTHER WOOD MATERIAL)

� Pozi countersunk head. � Thread: full/incomplete. � Point: self-tapping. � Coating: white or yellow zinc-plated. � Minimum yield strength: 1.5-10.8 Nm. � Core hardness: 320-450 HV. � Surface hardness: MIN 550 HV. � Material: steel C1022.


280333 Self-tapping countersunk screw for wood 3.0x16 1000































SO

SO

SO

SO

SO

SO


































Fixing Systems

www.temad.ro182



Weight

TOLERANCE MARGIN 3%

SO


280079 Self-tapping hex head screw for wood 6x40 200

















WOOD ITEMS FIXING SCREW (DIN 571)

� Hexagonal head. � Thread: large. � Point: self-tapping. � Coating: white zinc-plated. � Thread length Lt=L *0.6. � Hardness: gr. 4.8. � Core hardness: 220 NV. � Surface hardness: MIN 240 HV. � Material: steel C1022.



280431 Anchor for installation of doors and windows 10x72 100





ANCHOR FOR THE INSTALLATION OF DOORS AND WINDOWS

� Destined for the installation by perforation of doors and windows into concrete, stone, brick or AAC walls. The anchor consists in: longitudinal cut tube which can be expanded, Pz3-driven screw and cone nut.

� The anchor is firstly fitted into the wall and then in the fixed material.

� The tube thickness of the anchor for the installation of windows and doors is 0.8mm. At a thickness below 0.7mm, the fixing quality is severely affected.

Fixing Systems



Weight

ThreadThread length,Holes diameter, Length of anchor,

Anchoring Depth,

Screwdriving depth

TOLERANCE MARGIN 3%

pcs.


Weight

Length of anchor

ConcreteMinimum yield strength

Diameter Minimum depth of hole punching when anchoring

Maximum thickness of fixed material

TOLERANCE MARGIN 3%


280294 Drop-in anchor for concrete 6x8x25 100

280293 Drop-in anchor for concrete 10x12x40 50


280244 Hammer drive anchor 6,0x40 100

DROP-IN ANCHOR FOR CONCRETE FLOOR NAIL

� Used for fixing materials and machinery into concrete, stone, brick.

� The installation is simple and fast - it is fitted into the hole consistent with the diameter and the length of the anchor, it opens inside with the help of a special instrument. Afterwards, the metric rod or screw is fastened into the drop-in anchor for final fixing.

� It is destined for the fast fixing of metal elements, profiles, floors and suspended ceilings in materials such as concrete, stone, brick. Increased thermal resistance.

Fixing Systems

www.temad.ro184

TECHNICAL CHARACTERISTICSThread,

HEX HEAD SCREW, DIN-EN_ISO 4017, (OLD STANDARD DIN 933), ZINC-PLATED, HARDNESS GR. 8.8

� Material: steel C1 035. � Coating: zinc-plated. � Thread: full, metric, normal, medium-precision (6g).


280302 Screw DIN933 gr.8.8 M6x20 200

280303 Screw DIN933 gr.8.8 M6x30 200

280304 Screw DIN933 gr.8.8 M6x40 100

280305 Screw DIN933 gr.8.8 M6x45 100

280154 Screw DIN933 gr.8.8 M6x50 100

280178 Screw DIN933 gr.8.8 M6x60 100

280385 Screw DIN933 gr.8.8 M6x70 100

280197 Screw DIN933 gr.8.8 M6x80 100

280386 Screw DIN933 gr.8.8 M6x90 100

280384 Screw DIN933 gr.8.8 M6x100 100

280231 Screw DIN933 gr.8.8 M6x120 100

280306 Screw DIN933 gr.8.8 M8x25 100

280307 Screw DIN933 gr.8.8 M8x30 100

280322 Screw DIN933 gr.8.8 M8x35 100

280062 Screw DIN933 gr.8.8 M8x40 100

280063 Screw DIN933 gr.8.8 M8x50 100

280308 Screw DIN933 gr.8.8 M8x60 100

280309 Screw DIN933 gr.8.8 M8x70 100

280310 Screw DIN933 gr.8.8 M8x80 100

280389 Screw DIN933 gr.8.8 M8x90 100

SO

SO

SO

SO

SO

SO



280224 Screw DIN933 gr.8.8 M6x100 100

280065 Screw DIN933 gr.8.8 M10x30 50

280215 Screw DIN933 gr.8.8 M10x40 50

280066 Screw DIN933 gr.8.8 M10x50 50

280139 Screw DIN933 gr.8.8 M10x60 50

280313 Screw DIN933 gr.8.8 M10x80 50

280067 Screw DIN933 gr.8.8 M10x100 50

280380 Șurub DIN933 gr.8.8 M12x35 50

280903 Șurub DIN933 gr.8.8 M12x40 50

280068 Șurub DIN933 gr.8.8 M12x50 50

280315 Șurub DIN933 gr.8.8 M12x70 50

280316 Șurub DIN933 gr.8.8 M12x70 50

280200 Șurub DIN933 gr.8.8 M12x100 25

280201 Șurub DIN933 gr.8.8 M14x50 50

280217 Șurub DIN933 gr.8.8 M14x60 1

280381 Șurub DIN933 gr.8.8 M16x50 1

280216 Șurub DIN933 gr.8.8 M16x60 1

280257 Șurub DIN933 gr.8.8 M18x40 1

280434 Screw DIN933 gr.8.8 M20x50 1

280240 Screw DIN933 gr.8.8 M20x60 1

SO

SO

SO

SO

SO

SO

SO

SO

SO

SO

Fixing Systems



Thread,Thread length,

METRIC CARRIAGE BOLT, DIN 603

� Material: steel C1008. � Coating: zinc-plated. � Thread: metric, normal, medium-precision.

Thread,Length,

Minimum yield strength

Minimum yield strength


TOLERANCE MARGIN 3%

Weight

Weight

THREADED ROD, DIN 976 (OLD STANDARD DIN 975) 1 METER/ 2 METERS

� Material: steel C1008. � Coating: zinc-plated. � Filet: metric, normal, medium-precision. � It is used for the extension, connection and fastening of metric thread constructions and for the installation of beams, ventilation systems and of suspended structures.


280398 Carriage bolt gr4.8 DIN603 M6x20 100

























SO

SO

SO

SO

SO

SO



280031 Threaded rod DIN975 6x1000 1







280196 Threaded rod DIN975 20x1000 1SO


Fixing Systems

www.temad.ro186

ThicknessDiameter Diameter


Weight

TOLERANCE MARGIN 3%

FLAT WASHER, DIN-EN-ISO 7089 (OLD STANDARD DIN 125)


Thread

Weight

TOLERANCE MARGIN 3%

HEXAGONAL NUT, ZINC-PLATED DIN-EN-ISO 4032 (OLD STANDARD DIN 934) GR. 8


280114 Flat washer DIN125 M6 1000






280180 Flat washer DIN125 M24 50SO

SO


� Material: steel C1 008. � Coating: zinc-plated. � It is used in combination with screws and nuts in the automotive industry and in constructions.

� The interior diameter of the washer is slightly higher than the diameter of the metric screw.


280144 Nut DIN934 gr8 M4 1500

280145 Nut DIN934 gr8 M5 1500

280069 Nut DIN934 gr8 M6 1000

280070 Nut DIN934 gr8 M8 500

280071 Nut DIN934 gr8 M10 200

280072 Nut DIN934 gr8 M12 150

280156 Nut DIN934 gr8 M14 100

280187 Nut DIN934 gr8 M16 50

280397 Nut DIN934 gr8 M18 25

280241 Nut DIN934 gr8 M20 25

280204 Nut DIN934 gr8 M24 1SO

SO

SO


� Material: steel C1 035. � Coating: zinc-plated. � Thread: metric, normal, medium-precision (6H). � It is used in the automotive and the construction industries, for fixing and joining different parts and details with the help of fixing systems.

Fixing Systems


TECHNICAL CHARACTERISTICSDiameter Diameter

ThicknessWeight

TOLERANCE MARGIN 3%

ELASTIC WASHER (GROWER), DIN 127 PHOSPHATE-PLATED OR ZINC-PLATED

Thickness,


Diameter Diameter Weight

TOLERANCE MARGIN 3%

SPECIAL FLAT WASHER, DIN-EN-ISO 7093 (OLD STANDARD DIN 9021)


280038 GROWER washer M6 1000





SO

SO

SO

SO

SO


� Material: steel C1 008. � Coating: phosphate-plated or zinc-plated. � It is used in combination with screws and nuts in order to avoid unfastening, in the automotive industry and in constructions. The interior diameter of the washer is higher than the diameter of the metric screw.










SO


� Material: steel C1008. � Coating: zinc-plated. � The special flat washer is made of zinc-plated steel and it is used in automotive industry, in the construction field and in furniture manufacturing. We recommend the use of the washer in combination with screws, metric screws or with other fixing elements, in order to reduce pressure on the supporting surface made of thin materials (sheet metal, plastic, wood, etc.).

Fixing Systems

www.temad.ro188

Documents

Capitol catalog EN 2014 - Sisteme fixare