Embed Size (px)
Citation preview
CTG22 screw type add
ed!
Oilproof
E
Weatherproof
OIL Weather
Lineupexpanded!
Protection
Bestseller Bestseller
Wide typeCAPCON OA-WW series
Meets broad range cable sizes!Meets broad range cable sizes!
Rubber bushing (option)*
*Rubber bushing specially for OA-WW22-11/20 (option)
Threads
Threads
Entry hole φ21
Entry hole φ28
177
7000-21, Nakagawa, Hosoe, Kita-ku, Hamamatsu, Shizuoka 431-1304, JapanTEL +81-53-522-5562 FAX +81-53-523-2362 e-mail : [email protected]
URL : https://www.ohm.jp/
The contents of this catalog are subject to change for product improvement.Colors of products may slightly differ from actual due to printing.
OHM News
NippleNylon 66（Flammability:UL94V-2）
W sealPolypropylene（Flammability:UL94V-0）
Dome nutNylon 66（Flammability:UL94V-2）
O ringOilproof : NBRWeatherproof : EPDM
LocknutNylon 66
（Flammability:UL94V-2）
Rubber bushing
Rubber bushing
Oilproof : NBRWeatherproof : EPDM
NBR：Nitrile compound rubberEPDM：Ethylene propylene rubber
Slit
Dome nut
TypeOilproof
Weatherproof
Q’ty/packWeightPart number Applicable productsApplicable cable dia.
10 pcs.6 g
[Material] Oilproof : NBR (Black) Weatherproof: EPDM(Blue)
■ Material
■ Option (Rubber bushing)■ Dimensional drawing
■ Instructions for use
■ Clamping structure
■ Model/Specifications
Rubber bushing is evenly compressed by sprial contraction
Before contraction After contractionBefore contraction After contraction
Ｗ seal
Rubber bushing
Second step
First step
Expanded range of contact motion by 2 step deformation of W seal
Remove the dome nut of OA-WW22-11/20 and insert the rubber bushing.
■ Oilproof Rubber bushing : Black O ring : Black
■ Weatherproof Rubber bushing : Blue O ring : Blue
Applicable cabledia. (mm)
Entry holedia. (mm)
Max. platethickness
Max. platethickness
Threads Weight Q’ty/pack
Q’ty/packWeight
Working temp.
Working temp.ThreadsEntry holedia. (mm)
Applicable cabledia. (mm)
Model
Model
Black Beige
20 pcs.4 mm or less
6 mm or less
4 mm or less
6 mm or less-25 to +80 ℃
-25 to +80 ℃15 g
17 g
34 g
15 g
17 g
34 g
10 pcs.
20 pcs.
10 pcs.
on sale
on sale
【For pre-threaded holes on Limit switches etc.】
・ Use only one cable for one hole. ・ Use round cables of specified size only. Product performance is not secured for flat cables or any other cables than specified.・ If the nipple rotates while tightening the dome nut, fix them with a wrench and tighten the dome nut.
・ Tightening torque and tensile strength differ depending on coating material and hardness of the cable.・ Tensile strength and waterproof performance declines if cable sheath gets thin with age.
When mounting on female thread, remove the locknut and mount CAPCON on smooth surface without twisting O ring.
φ6-13
