Cap02 Wrenches En

8/12/2019 Cap02 Wrenches En

1/26

70


2/26

WRENCHES

Combination wrenches 72

Open ended jaw wrenches 77

Adjustable wrenches 80

Ring wrenches 81

Wrenches for connectors 84

Slugging wrenches 85

Double ended tubular box wrenches 88

Double ended offset tubular box wrenches 89

T-handle wrenches 90

Double ended swivel wrenches 94

Hook wrenches and 94adjustable pin-type face spanner

71


3/26

72

WRENCHES

is a profile designed by USAGfor improving tool performanceThe profile is the result of meticulous computer-assisted studieswhich have led us to replace the traditional angular hexagonal and bihexagonalprofiles with curved profiles. These offer considerable advantages:Longer tool life spanbecause of the absence of sharp edges that could cause breakage,Less risk of damaging nuts and screwsbecause force is applied to the sides of the nut rather than to its corners,More powerful tighteningbecause the contact surfaces are enlarged, thus reducing overall stress

Traditional

m

b b

5,5 15,2 10,5 3,5 5 114 186 15,2 10,5 3,5 5 114 177 18 12 3,5 5,4 122 228 19,7 13,5 3,7 5,7 130 259 21,7 14,5 4 5,8 138 30

10 23,8 16,5 4,2 6,3 146 4411 25,9 17,5 4,5 6,7 154 4812 27,8 18,7 4,7 7,2 162 5513 29,9 20 5 7,7 170 6214 31,8 21,5 5,2 8,2 180 7415 34,1 22,4 5,5 8,9 187 8116 36,3 24 5,7 9,5 195 9617 38,3 25 6 10 202 11318 40,1 26,5 6,2 10,6 210 12219 42,4 28,2 6,5 10,8 218 13220 44,2 29,5 6,7 11,5 226 16221 46,4 31 7 11,7 233 18822 48,1 32 7,2 12,1 248 20923 50 33,5 7,5 12,4 258 24224 52 34,7 7,7 12,7 268 27725 54,4 36,3 8 13,2 270 29226 57 38 8,2 13,6 284 32627 59 39 8,2 14 294 35328 61,6 41 8,5 14,4 305 38229 64 43 8,5 14,9 320 45630 66 44,2 8,7 15,3 323 47732 69 46 9 16 326 53634 70 47,8 9 17,5 312 585

35 75 50,3 9,3 18 333 58536 78,5 51,5 9,5 19 340 62638 85 54,3 10,2 20 356 77741 92 59,3 11 21 372 995

W a b c d L

mm mm mm mm mm mm gr

285 Ncombination wrenches

Bihexagonal head bent at 15 Open end angled at 15 Chrome Vanadium steel Chrome plated finish,

polished heads

UNI 6741 ISO 3318 DIN 3113

1/4 15,4 10,5 3,8 5 114 175/16 19,8 13 4,05 5,7 131 253/8 23,7 16,3 4,5 6,4 146 387/16 25,9 17,5 4,5 6,7 154 481/2 30,2 19,9 4,5 7,6 171 62

9/16 31,8 21,5 5,2 8,2 180 735/8 36,3 24 5,7 9,5 195 97

11/16 37,8 25,4 5,8 9,7 202 1103/4 41,9 28,2 6,5 10,8 218 150

13/16 44,2 29,5 6,7 11,5 226 1547/8 48,1 32 7,2 12,1 248 210

15/16 52 34,7 7,7 12,7 268 2731 54,4 36,3 8 13,2 270 309

1 1/ 16 59 39 8,2 14 294 3541 1/ 8 61,6 41 8,5 14,4 305 4171 1/ 4 69 46 9 16 326 5631 5/ 16 70 47,7 9 17,5 312 5001 3/ 8 75 50,3 9,3 18 333 6041 7/ 16 78,5 51,5 9,5 19 340 6231 1/ 2 85 54,3 10,2 20 356 782

W a b c d L

mm mm mm mm mm gr

285 NPcombination wrenches

Bihexagonal head bent at 15 Open end angled at 15 Chrome Vanadium steel Chrome plated finish,

polished heads

285 N/SE17Set of seventeen wrenches (285 N/622 mm)

1,6 kg

285 N/SE26Set of twenty-six wrenches (285 N/632 mm)

4,9 kg285 NP/SE13Set of thirteen wrenches (285 NP/1/41)

1,6 kg


4/26

73

WRENCHES

285 N/SR8Set of eight wrenches(285 N/8-10-11-13-14-17-19-22 mm) Supplied with plastic stand 0,8 kg

285 NP/SR8Set of eight wrenches (285 NP/3/813/16) Supplied with plastic stand 0,8 kg

285 PV8Empty plastic stand

285 N/B8Set of eight wrenches(285 N/8-10-11-13-14-17-19-22 mm) Supplied in plastic

wallet0,9 kg

285 N/B17Set of seventeen wrenches(285 N/622 mm) Supplied in plastic

wallet1,8 kg

285 N/R17Set of seventeen wrenches (285 N/622 mm) Supplied with metal holder for hanging to the wall

1,9 kg

285 RV17Empty metal holder

285 N/S17Set of seventeen

wrenches (285 N/622 mm) Supplied with metal display

stand2,2 kg

285 SV17Empty metal display stand

285 N/S26Set of twenty-six wrenches(285 N/632 mm) Supplied with metal

display stand 5,5 kg

285 SV26Empty metaldisplay stand

285 NP/S13Set of thirteen wrenches(285 NP/3/8-7/16-1/2-9/16-5/8-11/16-3/4-13/16-7/8-15/16-1 1/8-1 5/16-1 1/2) Supplied with metal

display stand2,6 kg

285 P/SV13Empty metaldisplay stand


5/26

74

WRENCHES

285 K/B8Set of eight reversible ratchetcombination wrenches(285 K/8-10-11-12-13-14-17-19 mm) Supplied in plastic wallet

0,9 kg

285 K/B12Set of twelve reversible ratchetcombination wrenches(285 K/819 mm) Supplied in plastic wallet

1,5 kg

285 K/SE12Set of twelve reversible ratchet combination

wrenches(285 K/819 mm)

1,5 kg

ba

c d

L

6 14,5 14 4,2 6,3 127 48 257 16,5 17 4,2 6,5 139 60 328 16,5 17 4,2 6,5 139 60 329 18,5 18,7 4,5 6,9 149 60 42

10 20,7 20,2 4,8 7,3 158 72 5211 22,7 22 5,2 7,8 164 72 6112 24,5 23,4 5,4 8,2 171 72 7213 26,5 25,6 6 8,6 177 72 8814 29 26,8 6,4 9 190 72 107

15 31 28,3 6,7 9,5 198 72 12416 33,2 29,7 7 10 207 72 14917 35,5 31,6 7,4 10,4 224 72 17118 37,3 32,6 7,9 10,7 235 72 19419 39,3 34 8,5 11,4 247 72 22622 46 40 9,3 13 290 83 33024 52 46,3 10,3 14,6 323 96 47427 55,5 52 10,3 15,5 358 112 63530 62 58 11,2 17 402 124 86032 66 62,5 12,3 17,6 423 136 1065

W a b c d L teeth mm mm mm mm mm mm n gr285 K

Reversible ratchet combination wrenches Reversible ratchet Integrated inversion lever Bihexagonal head bent at 15 Open end angled at 15 Chrome Vanadium steel Chrome plated finish

ISO 7738 ISO 3318

The reduced workingangle (72 teeth = 5)makes operating inrestricted spaces quickand easy.

The head of the wrench,bent at 15, guaranteesextreme manoeuvrabilityin every situation.

285 K: The next generation.

Precision and speed.Thanks to the reversible ratchet systemincorporated in the ring, inverting the direction ofwork can be done simply and quickly.An integrated lever is designed to preventaccidental inversions.


6/26

75

WRENCHES

10 25,1 16,4 5,1 7,5 212 6211 27,4 17,7 5,5 8 225 6912 29,7 18,7 5,9 8,5 238 8313 32 20,3 6,3 9 251 10014 34,3 21,9 6,7 9,5 264 12515 36,4 23,4 7,1 10 277 14016 38,6 25 7,5 10,5 290 15617 40 26,5 7,9 12 303 18818 42,9 28 8,3 12 316 20019 45 29,6 8,7 12 329 265

20 47 30,7 9,1 13 342 26721 49 32,3 9,5 13 355 29522 51 33,8 9,9 14 368 37023 53 35,4 10,3 14,5 381 38024 55 36,9 10,7 15 394 47525 57 38,2 11,1 15,5 407 48026 59 39,4 11,5 15,5 420 50527 61 40,6 11,9 16 433 60328 62,4 42,2 12,3 16,5 446 63030 65 45,2 13,1 17 472 78132 69,5 47,8 13,2 18 498 90034 72,7 50,7 14,7 19 524 105036 76 53,6 15,5 20 550 127638 80 56 16,3 22 576 139141 86 59,2 17,5 23 615 172146 95 65,8 19,5 25 680 2400

W a b c d L mm mm mm mm mm mm gr285 L

long combination wrenches Bihexagonal head bent at

15 Open end angled at 15 Shank with double-T profile

to guarantee maximumresistance

Chrome Vanadium steel

Chrome plated finish

UNI 6741 ISO 3318 ISO 7738

285 L/R13Set of thirteen wrenches (285 L/1022 mm) Supplied with metal holder for hanging to the wall

2,7 kg

285 L/RV13Empty metal holder


7/26

76

WRENCHES

50 103 75 16,5 26 560 2,3155 113 84,5 18 28 610 3,2560 123 90 20 31 660 3,5365 133 92 22 33 710 4,7870 143 105 24 35 760 5,76

W a b c d L mm mm mm mm mm mm Kg285 LP

Heavy-duty combination wrenches Bihexagonal head offset

and bent at 10 Open end angled at 15 Chrome Vanadium steel Chrome plated finish,

polished heads

UNI 6741 DI N 3113

3,2 10 7 3,1 3,1 77 74 10 8 3,1 3,1 77 75 11,8 9 3,5 4 82 105,5 11,8 9,5 3,5 4 82 96 15 10,4 4,1 5 90 147 15 11,5 4,1 5 90 138 17,2 12,5 4,5 5,8 94 209 19,4 14 4,8 6 98 24

10 21,5 15,3 5,1 6,4 103 3011 23,7 16,8 5,3 6,8 109 3712 26 18 5,5 7,5 127 4713 28 19,5 5,1 6,9 141 5614 30,2 20,8 6 8,5 147 7015 32,3 22,1 6,4 9 152 7916 34,4 23,6 6,7 9,6 158 8917 36,5 25 6,9 10 165 105

W a b c d L mm mm mm mm mm mm gr

285 CShort combination

wrenches Ring head bent at 15,

with hexagonal profileup to size 5,5 mm,bihexagonal for largersizes

Open end angled at 15 Chrome Vanadium steel Chrome plated finish

ISO 3318

285 C/SE10Set of ten wrenches(285 C/4-5-6-7-8-9-10-11-12-13 mm) Supplied in nylon wallet

0,3 kg

285 C/SE16Set of sixteen wrenches(285 C/3,217 mm) Supplied in nylon wallet

0,7 kg


8/26

77

WRENCHES

4x5 13 14,5 3,5 114 175,5x7 15,2 17,7 3,5 121 19

6x7 15,2 17,7 3,5 121 197x8 18,7 21,2 3,9 138 298x9 18,7 21,2 3,9 138 298x10 19 23 3,9 143 34

10x11 23 25 4,4 153 4610x13 23,5 29,5 4,7 163 5012x13 26 39,5 4,7 168 5812x14 28,9 33,4 5 177 7113x14 31 33,1 5,3 182 8313x15 31 33,1 5,3 182 8313x17 30,6 36,6 5,7 192 9914x15 31 33,1 5,3 182 83

14x17 30,6 36,6 5,7 192 9916x17 37,4 42,4 6,7 210 15717x19 39,2 42,2 6,9 220 19118x19 39,2 42,2 6,9 220 19119x22 47 50,5 7,7 242 22020x22 47 50,5 7,7 242 22021x23 47 50,5 7,7 242 22022x24 47 50,5 7,7 242 22024x26 52 59 8,3 270 34024x27 52 59 8,3 270 34025x28 57 62,5 8,4 282 37827x29 60 65 8,9 301 48027x30 60 65 8,9 301 48027x32 60 65 8,9 301 48030x32 64 71 9,6 318 52032x36 72 76 10,5 342 71034x36 72 76 10,5 342 71035x38 79 88 11,5 381 92336x41 79 88 11,5 381 92341x46 93 100 12,5 413 160746x50 102 107 13,5 442 190050x55 102 107 13,5 442 1900

W a b c L mm mm mm mm mm gr

252 NDouble ended open jaw

wrenches Heads angled at 15 Chrome Vanadium steel Chrome plated finish

UN I 6736 ISO 3318 DIN 3110

1/4x5/16 15,2 17,7 3,5 121 195/16x3/8 18,7 21,2 3,9 139 293/8x7/16 23 25 4,4 153 46

7/16x1/2 26 29,5 4,7 168 581/2x9/16 31 33,1 5,3 182 83

9/16x5/8 31 33,1 5,3 182 835/8x11/16 37,4 42,4 6,7 210 157

11/16x3/4 39,2 42,2 6,9 220 1913/4x7/8 47 50,5 7,7 242 2207/8x15/16 47 50,5 7,7 242 220

15/16x1 52 59 8,3 270 3401x1 1/ 8 57 62,6 8,4 282 378

1 1/ 16 x1 1/ 4 60 65 8,9 301 4801 3/ 8x1 1/ 2 79 88 11,5 381 923

W a b c L

mm mm mm mm gr

252 NPDouble ended open jaw

wrenches Heads angled at 15 Chrome Vanadium steel Chrome plated finish

252 NP/SE7Set of seven wrenches(252 NP/1/4x5/16-3/8x7/16-1/2x9/16-5/8x11/16-3/4x7/8-15/16x1-1 1/16x1 1/4)

1,5 kg


9/26

78

WRENCHES

252 N/B8Set of eight wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm) Supplied in plastic wallet 0,9 kg

252 N/B12Set of twelve wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-25x28-30x32 mm) Supplied in plastic wallet 2,4 kg

252 N/B13Set of thirteen wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied in plastic wallet 3 kg

252 N/R13

Set of thirteen wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with metal holder for hanging to the wall

2,9 kg


252 N/S13Set of thirteen wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with metal display stand

3,6 kg


252 N/SR8Set of eight wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm) Supplied with plastic stand 0,9 kg

252 N/SR12Set of twelve wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-25x28-30x32 mm) Supplied with plastic stand 2,4 kg

252 N/SR13Set of thirteen wrenches (252 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with plastic stand 2,8 kg

252 PV12-13Empty plastic stand

252 PV8Empty plastic stand


10/26

79

WRENCHES

250 N/SE12Set of twelve wrenches (250 N/3,2-4-4,5-5-5,5-6-7-8-10-12-13-14 mm) Supplied in plastic wallet

0,3 kg

4 14 3,5 90 135 14 3,5 90 135,5 14 3,5 90 12

6 18 3,7 100 207 18 3,7 100 208 21 4 105 269 21 4 105 26

10 26 4,5 120 4011 26 4,5 120 4012 26 4,5 120 4013 32 5,2 145 6614 32 5,2 145 6615 32 5,2 145 6516 40 5,5 160 9817 40 5,5 160 9718 40 5,5 160 9619 44 6 175 12720 44 6 175 12521 44 6 175 12322 50 6,5 196 17023 50 6,5 196 16824 50 6,5 196 16725 54 7 216 20726 54 7 216 20627 54 7 216 20328 58 7,5 240 26930 58 7,5 240 26732 68 8 270 36234 68 8 270 36035 80 8,5 300 53536 80 8,5 300 50338 80 8,5 300 469

40 93 9,5 340 75041 93 9,5 340 73542 93 9,5 340 72345 100 10,5 376 96046 100 10,5 376 92047 100 10,5 376 90548 105 12 420 132050 105 12 420 134552 113 13 450 178055 113 13 450 178060 132 14 495 247065 132 14 495 244370 146 16 570 336075 146 16 570 3130

W a b L mm mm mm mm gr

248Single ended open jaw

wrenches Head angled at 15 Chrome Vanadium steel Nickel Chrome plated finish

UN I 6733 DIN 3114

3,2 10 10 2,4 70 64 10 10 2,4 70 6

4,5 13 13 2,4 75 85 13 13 2,4 75 85,5 13 13 2,4 75 86 15 15 2,7 80 87 15 15 2,7 80 88 17,5 17,5 3 90 169 17,5 17,5 3 90 16

10 22 22 3 100 2111 22 22 3 100 2112 26,5 26,5 4 120 3713 26,5 26,5 4 120 3714 26,5 26,5 4 120 37


250 NSmall double ended open

jaw wrenches Same-size openings

angled at 15 and 75 Chrome Vanadium steel Chrome plated finish,

polished heads

UNI 6737 ISO 3318


11/26

80

WRENCHES

110 13 1/2 31 9,5 55150 19 3/4 46 11 125200 24 15/16 57,5 13,5 255250 30 1 3/16 70 16 410300 35 1 3/8 82,5 19 720380 44,5 1 3/4 104 25 1280460 54 2 1/8 120 25 2114

L a b c mm max mm max mm mm gr

294 C Adjustable wrenches Head angled at 15, with

scale in millimeters Sliding jaw opening by

rotating knurl to theright

Body in Chrome

Vanadium steel Chrome plated finish,polished head

UNI 6734 DIN 3117

294 CRSet of spare parts

110150200250300380460

Lmm

110 14 1/2 31 9,5 56150 19 3/4 46 11 135200 27 15/16 57,5 13,5 265250 30 1 3/16 70 16 405300 36 1 3/8 82,5 19 740380 47 1 3/4 104 25 1315

L a b c mm max mm max mm mm gr

294 CN Adjustable wrenches Head angled at 15,

with scale in millimeters Sliding jaw opening by

rotating knurl to the left Body in Chrome

Vanadium steel Phosphatised finish,

polished head

UNI 6734 DIN 3117

294 CNRSet of spare parts

110150200250300380

Lmm


12/26

81

WRENCHES

6x7 10,5 12 5,3 6 19 20 167 458x9 13,5 15 5,3 7 20 21 182 64

8x10 13,5 15,3 5,3 7 20 21 182 6510x11 16,5 18 7,3 8,5 22 23 197 8812x13 19,5 2,1 8,7 9 24 25 218 15313x17 21,5 26 9,2 10,5 27 28 245 17514x15 22 23,5 9 9,5 25 26 238 15616x17 25,5 26,5 10,5 11 27 28 258 21217x19 26,5 29,5 11 12 29 30 290 29018x19 27,3 29,5 11 12 29 30 290 26419x22 29 32,7 11,5 12,5 31 32 296 30220x22 31,5 34,5 12 13 31 32 316 35821x23 32 35 12 13 31 32 316 36422x24 33,7 38,7 12 13 33 34 324 40224x26 3,7 40,5 12,5 14,1 33 34 328 44024x27 37,2 41,2 12,5 14,1 33 34 328 423

25x28 39,5 43 13,5 14,5 34 35 345 51027x29 41,5 45,5 14,1 15,5 35 36 353 60827x32 41,5 46,2 14,1 15,5 35 36 353 56030x32 45,3 48,5 15 16,5 36 38 360 64634x36 51,5 54,5 18 20 40 42 440 113236x41 53,7 61,7 18 20 40 42 440 110546x50 70,5 76,5 20,5 21,5 44 48 510 1970

W a b c d e f L mm mm mm mm mm mm mm mm gr

283 Ndouble ended

offset bihexagonal ring wrenches Chrome Vanadium steel Chrome plated finish,

polished heads

UN I 6740 ISO 10104 DIN 838

1/4x5/16 10,5 13,5 5,3 6,3 20 20 172 555/16x3/8 13,5 15,3 5,3 7 20 21 182 65

3/8x7/16 16,5 18 7,3 8,5 22 21 197 887/16x1/2 18 21 8,7 9 24 23 217 1401/2x9/16 21 22,5 9 9,5 25 25 238 145

9/16x5/8 22 23,5 9 9,5 25 28 238 1565/8x11/16 25,5 26,5 10,5 11 27 26 258 2125/8x3/4 25,5 27,2 10,5 11 27 28 258 212

25/32x13/16 31,5 34,5 12 13 31 30 316 3587/8x15/16 33,7 38,7 12 13 33 30 324 402

15/16x1 37,2 40,5 12,5 14,1 33 32 328 4401x1 1/ 8 39,5 43 13,5 14,5 34 32 345 510

1 1/ 16 x1 1/ 8 41,5 45,5 14,1 15,5 35 32 353 6081 3/ 16 x1 5 /16 45,5 51,5 17 19 37 34 402 6791 3 / 8x1 1/ 2 53 57,5 18 20 40 34 440 1032

W a b c d e f L mm mm mm mm mm mm mm mm gr

283 NPdouble ended

offset bihexagonal ring wrenches Chrome Vanadium steel Chrome plated finish,

polished heads

283 N/SE8Set of eight wrenches (283 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm) 1,4 kg

283 NP/SE7Set of seven wrenches (283 NP/ 1/4x5/16-3/8x7/16-1/2x9/16-9/16x5/8-5/8x3/4-25/32x13/16-7/8x15/16-15/16x1)

2 kg

283 N/SE12Set of twelve wrenches (283 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-25x28-30x32 mm) 3,4 kg

283 NP/SE12Set of twelve wrenches (283 NP/ 1/4x5/16-3/8x7/16-1/2x9/16-9/16x5/8-5/8x3/4-25/32x13/16-7/8x15/16-15/16x1-1x11/8-11/16x1 1/8-13/16x15/16-13/8x1 1/2)

4,8 kg

283 N/SE13Set of thirteen wrenches (283 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) 4 kg

283 N/B8Set of eight wrenches (283 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm) Supplied in plastic wallet

1,5 kg


13/26

82

WRENCHES

283 N/R13Set of thirteen wrenches(283 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with metal holder for hanging to the wall

4,2 kg


24 17 29,5 38 180 0,3727 17 31,5 41 190 0,4230 18 33,5 48 200 0,4832 18 34 49 235 0,7236 20 35,5 55 245 0,8241 22 39,5 62 265 0,9546 23 40 69 280 1,2150 25,5 42,5 76 290 1,3655 28 45,5 81 300 1,4260 30,5 49 90 345 2,1865 33 53 98 355 2,5670 35,5 55 105 365 2,7075 38 57,5 110 375 3,0680 40,5 59 125 385 3,80

85 40,5 59 125 385 3,4090 45 63 140 410 4,8495 45 63 140 410 4,70

100 45 63 143 412 4,80

W a b c L mm mm mm mm mm

Kg

253Heavy-duty single ended offsetbihexagonal ring wrenches For use in combination

with drive bar 253 P forexercising high torque

Chrome Vanadiumsteel

Zinc chrome platedfinish

1 2430 460 0,752 3241 610 1,183 4655 760 1,894 60100 860 2,90

n W L mm mm Kg

253 PDrive bars For use in combination with

wrenches 253 Chrome Vanadium steel Zinc chrome plated finish

283 N/S13Set of thirteen

wrenches(283 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with metal

display stand4,7 kg

283 NP/S13Set of thirteen

wrenches(283 NP/1/4x5/16-5/16x3/8-3/8x7/16-7/16x1/2-1/2x9/16-9/16x5/8-5/8x1 1/16-5/8x3/4-25/32x13/16-7/8x15/16-15/16x1-1 1/16x1 1/8-1 3/16x1 5/16) Supplied with metal

display stand4,2 kg



14/26

83

WRENCHES

21x22 34 35 17 17 315 615


284Double ended offsetbihexagonal ring wrenchfor scaffolds Chrome Vanadium steel Chrome plated finish

6x7 10,7 12,0 5,5 120 208x9 13 16,2 6,5 136 30

10x11 16,2 19,5 7,7 153 4812x13 19,8 21,8 8,9 163 7014x15 22,1 25 8,6 180 8816x17 25,1 26,7 9,7 210 12117x19 27,7 28,8 10,5 226 15118x19 27,5 28,4 10,7 226 15021x23 32,3 35,3 12,8 255 23722x24 32,3 35,3 12,8 255 23526x28 39,3 43,6 14,2 315 42027x29 39,3 43,6 14,2 315 41530x32 44,8 47,8 14,4 334 518


255 NStraight double endedbihexagonal ring wrenches Chrome Vanadium steel Chrome plated finish

UN I 6739 ISO 3318 DIN 837

255 N/SE8Set of eight wrenches (255 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-22x24 mm)

0,5 kg

255 N/SE12Set of twelve wrenches (255 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23-22x24-26x28-27x29-30x32 mm)

1,5 kg

E6xE8 5,74x7,52 9 11 5 6 115 19E10xE12 9,42x11,17 13 15 7 8 150 36E14xE18 12,90x16,70 17 21 8 9,5 190 77E20xE24 18,45x22,16 24 28 11 13,5 240 193

n g a b c d L mm mm mm mm mm mm gr

255 TXStraight double ended wrenches Heads with patented high

resistance profile profile rotated 15

with respect to the axis ofthe wrench, to allow for agrip at an angle of only 30by reversing the wrench

Chrome Vanadium steel Chrome plated finish,

polished heads

255 TX/S4Set of four wrenches(255 TX/E6xE8E20xE24)

0,3 kg

10x12 15,8 18,5 6,3 54,1 143 8511x13 18,1 21,3 8,1 66,6 165 8514x17 21,1 24,8 8,1 79,2 190 18015x17 25,8 29,1 9 81,3 220 18016x18 25,9 29,1 9 81,3 220 21519x22 27,8 32,6 10,6 94,3 253 280


258 NSpecial double endedbihexagonal ring wrenches For use on nuts in

inaccessible places, andin particular for motorstarters, manifolds andother engine parts in theautomotive sector

Chrome Vanadium steel Chrome plated finish

ISO 3318

258 N/SE5Set of five wrenches(258 N/10x12-11x13-15x17-16x18-19x22 mm)

0,9 kg

UN I 6740 ISO 10104


15/26

84

WRENCHES

8x10 14,8 18,3 5,9 7,4 10 125 4510x11 18,3 19,2 7,4 8,1 10 127 5311x13 19,2 22,1 8,1 9,5 11,5 143 7912x14 21,5 23,8 8,9 10,3 11,5 145 9017x19 27,5 30,6 12,6 14,1 13 164 135

W a b c d e L mm mm mm mm mm mm mm gr

256 ANWrenches with retainerfor connectors Straight heads

hexagonal profile withretainer to giveimproved grip on thenut during operations

Chrome Vanadiumsteel


8x10 17,5 19,3 6 6,9 6,8 7,2 140 4210x11 19,3 21,1 6,9 9,5 8 8,5 153 5611x13 21 25,3 9 11,2 8,1 10 174 8112x14 21,3 25,6 9,2 11,2 8,1 10 174 8117x19 31 33 14,3 15,1 10,6 11,9 203 16019x22 33,2 38,2 15,2 18,3 12,6 13,6 228 21522x24 38,2 41,6 18,3 18,5 14,9 15,9 243 31224x27 42,1 46,2 18,3 20,8 15,2 16 257 31230x32 50 52 22,7 24,2 19 20 296 58036x41 60,7 67,9 25,5 32,2 25 20,2 316 1035

W a b c d e f L mm mm mm mm mm mm mm mm gr256 N

Wrenches for connectors Heads bent at 15 and

angled laterally to 15 Hexagonal profile up to

size 12x14 mm andbihexagonal profile forlarger sizes


DIN 3118

256 N/SE7Set of seven wrenches(256 N/8x10-10x11-11x13-12x14-17x19-19x22-24x27 mm)

1 kg

256 AN/S5Set of five wrenches(256 AN/8x1017x19 mm) Supplied in nylon wallet

0,4 kg


16/26

85

WRENCHES

8 27 7,2 138 7610 27 7,2 138 7611 27 7,2 138 7612 27 7,2 138 75

13 27 7,2 138 7114 35 9,7 184 14516 35 9,7 184 13917 35 9,7 184 13719 35 9,7 184 13321 43 11,2 236 26522 43 11,2 236 25124 43 12,9 236 252

W a b L mm mm mm mm gr

260Ratchet wrenches for connectors For rapid tightening without

removing the wrench from thenut

Hexagonal profile up to size 12mm and bihexagonal profile forlarger sizes

Jaws in Chrome Vanadiumsteel

Body in pressed sheet steel Polished Nickel plated finish

and burnished ring

260 SE6Set of six wrenches (260/8-10-11-13-17-19 mm) Supplied in nylon wallet

0,6 kg

260 SE12Set of twelve wrenches (260/824 mm) Supplied in nylon wallet

1,8 kg

24 40 14 180 0,3527 56 16 180 0,3530 62 17 190 0,4032 70 17 200 0,4536 76 17,5 215 0,7041 86 18,5 235 1,0046 98 20 255 1,3050 105 21 275 1,6055 116 23 300 2,0560 128 24,5 320 2,6065 138 27 342 3,2570 154 30 375 4,25

75 154 30 375 4,1580 174 34 408 6,1085 174 34 408 5,9090 194 38 445 8,3595 194 38 445 8,10

100 215 44 485 11,50105 215 44 485 11,20110 235 47 510 14,00115 235 47 510 13,80120 255 50 545 18,00125 255 50 545 17,80130 275 55 575 21,00135 275 55 575 20,40140 275 55 575 20,00145 305 60 640 28,50150 305 60 640 28,30155 305 60 640 28,00160 342 70 715 28,40165 342 70 715 42,00170 342 70 715 39,00175 342 70 715 38,00180 342 70 715 40,00185 342 70 720 39,50190 342 70 720 53,00195 342 70 720 52,00200 342 70 720 51,00210 342 70 720 50,50220 342 70 720 48,00230 342 70 720 47,50

W a b L mm mm mm mm kg

249Single ended open jawslogging wrenches For use with sledge

hammers or pneumatichammers, for tightening orloosening operations in theheavy industry sector

Carbon steel Zinc Chrome plated finish

UNI 6735 DIN 133


17/26

86

WRENCHES

24 43 15 165 0,2527 46 16 180 0,3030 52 17 190 0,4032 52 17 190 0,3536 58 18 205 0,5041 66 20 230 0,8046 74 22 240 1,0050 80 24 255 1,1055 86 25 270 1,3060 93 26 280 1,6065 102 30 300 2,3070 110 33 330 2,9075 110 33 330 2,6080 126 36 360 3,9085 126 36 360 3,5090 142 40 390 5,4095 142 40 390 4,90

100 155 45 420 6,30105 155 45 420 6,30110 170 48 450 8,00115 170 48 450 7,90120 182 54 480 9,90125 182 54 480 9,10130 202 58 520 13,30135 202 58 520 12,50

140 210 58 520 13,70145 228 64 580 18,30150 228 64 580 18,80155 228 64 580 18,50160 240 64 580 18,80165 265 70 650 28,50170 265 70 650 27,50175 265 70 650 27,80180 265 70 650 26,30185 290 75 700 35,50190 290 75 700 34,00195 290 75 700 32,80200 290 75 700 32,00210 320 80 750 41,00215 320 80 750 40,00220 320 80 750 38,70


254Single ended bihexagonalslogging wrenches For use with sledge hammers or

pneumatic hammers, for tighteningor loosening operations in theheavy industry sector


UNI 6738 DIN 7444

1 1/ 16 44 16 180 0,301 1/ 8 44 16 180 0,301 3/ 16 53 17 190 0,401 1/ 4 53 17 190 0,351 5/ 16 53 17 190 0,351 3/ 8 60 19 205 0,501 7/ 16 60 19 205 0,501 1/ 2 60 19 205 0,501 9/ 16 67 20 230 0,801 5/ 8 67 20 230 0,801 11 /16 67 20 230 0,801 3/ 4 75 22 240 1,001 13 /16 75 22 240 1,001 7/ 8 75 22 240 1,001 15 /16 81 24 254 1,10

2 81 24 254 1,102 1/ 16 81 24 254 1,102 1/ 8 88 25 268 1,302 3/ 16 88 25 268 1,302 1/ 4 88 25 268 1,302 5/ 16 95 26 280 1,602 3/ 8 95 26 280 1,602 7/ 16 95 26 280 1,602 1/ 2 95 26 280 2,302 9/ 16 102 28 300 2,30

25

/ 8 102 28 300 2,302 11 /16 102 28 300 2,902 3/ 4 112 33 320 2,902 13 /16 112 33 320 2,902 7/ 8 112 33 320 2,602 15 /16 112 33 320 2,60

3 112 33 320 2,603 1/ 8 128 36 359 3,903 1/ 4 128 36 359 3,903 3/ 8 128 36 364 3,903 1/ 2 143 40 388 5,403 5/ 8 143 40 388 5,403 3/ 4 143 40 388 4,903 7/ 8 156 45 421 6,80

4 156 45 421 6,804 1/ 8 156 45 421 6,304 1/ 4 171 48 450 8,004 1/ 2 171 48 450 7,904 5/ 8 171 48 450 7,90

5 183 51 475 9,10


254 PSingle ended bihexagonalslogging wrenches For use with sledge hammers or

pneumatic hammers, fortightening or loosening operationsin the heavy industry sector


UN I 6738 DIN 7444


18/26

87

WRENCHES

4x5 8,5 9,5 4 92 195,5x7 10 11,5 5,5 100 26

6x7 10,5 11,5 5,5 100 268x9 13 14,5 5,5 108 41

10x11 16 17 6,5 116 6410x13 16 20,5 6,5 124 9012x13 19 20,5 6,5 124 9614x15 21,5 22,5 8 132 12616x17 24 26 8 140 15017x19 26 28,5 8 148 17618x19 27,5 28,5 8 148 17720x22 29,5 32 10 156 24821x23 31 33 10 163 27124x26 34,5 37 11 173 33425x28 36 39,5 12,5 182 44027x29 38,5 40,5 12,5 191 485

30x32 42 45 12,5 200 587


288 NDouble ended tubular box wrenches Light-duty wrenches with

hexagonal openings,manufactured from a soliddrawn tube

Transverse holes for drivebars 292


UNI 6746 ISO 2236 DIN 896

288 N/8Set of eight wrenches (288 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm) Supplied with drive bar 292/1

1 kg

288 N/12Set of twelve wrenches (288 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-

30x32 mm) Supplied with drive bars 292/1-2

2,9 kg

288 N/13Set of thirteen wrenches (288 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with drive bars 292/1-2

3,5 kg

5 8,8 16,5 4 95 205,5 9,3 18 4 95 226 9,9 17,5 5,5 100 317 11,1 19,5 5,5 100 328 12,7 20,5 5,5 109 499 13,9 22 5,5 109 50

10 15,5 23,5 6,5 118 7511 16,7 23,5 6,5 118 7812 18,9 27 6,5 127 11813 19,5 27 6,5 127 11714 21,2 31 8 136 152

15 22,3 31 8 136 15716 23,4 35 8 145 19417 24,5 35 8 145 19018 25,8 39 8 154 22419 27 39 8 154 22720 29,1 41,5 10 163 29021 30,3 41,5 10 163 32922 31,4 42 10 172 36024 33,7 45,5 11 180 42827 38,2 49 12,5 190 58030 41,8 53,5 12,5 205 63532 44,5 57 13,5 215 807


289 NDouble ended offset tubular box wrenches Light-duty wrenches with

hexagonal openings,manufactured from a drawntube



UNI 6749 ISO 2236

289 N/SE17Set of seventeen wrenches (289 N/622 mm) Supplied with drive bar 292/1

2,8 kg

289 N/SE21Set of twenty-one wrenches (289 N/632 mm) Supplied with drive bars 292/1-2

5,4 kg


19/26

88

WRENCHES

6x7 9,5 10,7 8 4 110 378x9 12,5 14 9 4 120 45

10x11 15 16 11 5,5 130 6512x13 17,5 19 13 5,5 140 10214x15 20 21,5 15 6,5 150 13816x17 22,7 24 17 8 160 18518x19 25,2 26,5 19 8 170 22820x22 27,7 30,2 20 10 180 262

21x23 29 31,2 21 10 185 28024x26 33 35,5 24 11 190 42225x28 34,5 38 25 11 195 45027x29 37 39,5 27 12,5 200 50430x32 40,5 43 30 12,5 200 62236x41 49 55,5 36 18,25 240 1086


290 EDouble ended tubular socket wrenches Heavy-duty socket wrenches

with hexagonal openings,manufactured from a forgedhexagon, drilled across thefull length


Hexagonal body to allowwork with open endedwrenches

Double grooving at one ofthe extremities forimmediate identification ofthe larger opening


UNI 6745 ISO 2236 DIN 896

290 E/8Set of eight wrenches (290 E/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm) Supplied with drive bar 292/1

1,1 kg

290 E/12Set of twelve wrenches (290 E/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-30x32 mm) Supplied with drive bars 292/1-2

3,3 kg

290 E/13Set of thirteen wrenches (290 E/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with drive bars 292/1-2

3,8 kg

290 E/C13Set of thirteen wrenches (290 E/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied in sheet steel case

with drive bars 292/1-25,5 kg

290 E/R13Set of thirteen wrenches (290 E/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with metal holder for hanging to the wall

and drive bars 292/1-24 kg

290 E/RV13Empty metal holder

290 E/S13Set of thirteen

wrenches (290 E/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x26-25x28-27x29-30x32 mm) Supplied with metal

display stand and drivebars 292/1-2

4,2 kg

290 E/SV13Empty metaldisplay stand


20/26

89

WRENCHES

5,5 8,8 19,8 8 4 87 326 9,5 19,6 8 4 87 347 10,7 20 8 4 92 398 12,5 23,4 9 4 97 469 14 23,8 9 4 106 54

10 15 26,3 11 5,5 113 7511 16 27,7 11 5,5 121 8512 17,5 29,1 13 5,5 131 11413 19 30,5 13 5,5 138 13014 20 32,9 14 6,5 146 14615 21,5 34,4 15 6,5 153 18516 22,7 34,8 17 8 159 23017 24 36,3 17 8 167 26018 25,2 37,6 19 8 171 30019 26,5 39,1 19 8 176 32520 27,7 40,5 20 10 185 35021 29 41,9 20 10 191 38422 30,2 43,3 20 10 199 42224 33 46,2 24 11 211 58527 37 50,4 25 11 228 69030 40,5 57,7 27 12,5 247 90432 43 60,5 30 12,5 263 1120


291Double ended offset socket wrenches Heavy-duty wrenches, straight head with

hexagonal opening and bent head withbihexagonal opening, manufactured froma forged and drilled hexagon

Transverse holes fordrive bars 292

Hexagonal body to allowwork with open endedwrenches

Chrome Vanadium steel


UN I 6748 ISO 2236

291 SE17Set of seventeen wrenches (291/622 mm) Supplied with drive bar 292/1

3,3 kg

291 SE21Set of twenty-one wrenches (291/632 mm) Supplied with drive bars 292/1-2

7 kg

6 10 16 21 102 337 11 17 22 106 348 12,5 19 25 114 609 13,5 20 26 122 67

10 15 24 28 129 9011 16,5 25 30 136 11312 18 28 36 144 14513 19,5 30 38 152 17014 21 32 40 160 20215 22,5 34 42 169 22816 24 37 46 178 28317 25,5 39 48 187 31318 26,5 40 50 195 32819 28,5 41 51 204 42520 29,5 43 53 212 44521 30,5 46 55 221 48622 32 48 57 230 52823 33,5 51 64 240 62824 34,5 54 67 250 66025 36 56 69 260 80526 37 57 70 270 837

27 38 58 73 280 94528 39,5 60 75 290 99030 42 64 83 310 125732 44,5 74 88 330 1398


291 NDouble ended hollowoffset socket wrenches Heavy-duty wrenches,

deep straight head withhexagonal opening andbent head withbihexagonal opening,hollowed out for projectingscrews or drive bars


ISO 2236

291 N/SE17Set of seventeen wrenches (291 N/622 mm)

3,9 kg

291 N/SE25Set of twenty-five wrenches (291 N/632 mm)

10,9 kg


21/26

90

WRENCHES

1 423 220 852 2432 300 2863 2741 350 590

n W L mm mm gr

292Drive bars Model with differentdiameters for use in

combination with tubularbox wrenches 288 N-290 Eand tubular socketwrenches 289 N-291


5 9,8 12,1 165 215 1246 11,3 12,1 165 215 1248 15 15,6 175 260 2439 16,5 16,6 175 260 240

10 17,5 18,3 180 260 31011 19,2 19,3 180 260 31513 23 23,7 220 285 50714 24 25,1 220 285 50715 25,2 26,1 220 285 50716 27,7 27,8 260 310 76117 29 28,8 260 310 78518 30,2 30,5 300 310 93019 31,5 31,5 300 310 950

e a b c L mm mm mm mm mm gr

274T-handle wrenches

with square opening Removable sliding bar Chrome Vanadium

steel Chrome plated finish,

polished head

6 9,8 12,1 165 215 1247 11,3 12,1 165 215 1258 12,5 13,8 165 235 1539 13,7 14,8 165 235 154

10 15 15,6 175 260 243

11 16,5 16,6 175 260 24612 17,5 18,3 180 260 30213 19,2 19,3 180 260 30614 20,5 21 200 260 37915 21,7 22 200 285 45716 23 23,7 220 285 49517 24 25,1 220 285 50018 25,2 26,1 220 285 50219 26,5 26,8 260 310 74820 27,7 27,8 260 310 75421 29 28,8 260 310 75322 30,2 30,5 300 310 91524 33 32,5 300 315 94227 37 37 330 315 118530 40,5 39,7 370 320 146032 43,5 42,1 455 320 1985


275

T-handle wrenches withhexagonal opening Removable sliding bar Chrome Vanadium

steel Chrome plated finish,

polished head

UNI 6742 DIN 3112

275 SE5Set of five wrenches (275/8-10-13-17-19 mm)

2 kg

275 SE17Set of seventeen wrenches (275/622 mm)

7,1 kg

275 SE21Set of twenty-one wrenches (275/632 mm)

12,9 kg


22/26

275 CO/S12Set of twelve wrenches(275 CO/414 mm) Supplied with metal display stand 1,7 kg

91

WRENCHES

4 7,2 13 80 80 455 8,5 14 85 85 495,5 9,2 15 90 90 516 10 16 95 95 547 11,5 17 100 100 778 12,5 18 105 105 819 13,7 19 110 110 88

10 15 20 115 115 12411 16,2 21 121 121 13312 17,5 23 128 128 18713 19 24 135 135 20114 20,2 25 142 142 211


275 COShort T-handle wrenches

with hexagonal opening Deep hexagonal opening for

working on projectingscrews

Removable sliding bar Chrome Vanadium steel Chrome plated finish,

polished head

UNI 6742 DIN 3112

275 CO/SE12Set of twelve wrenches (275 CO/414 mm)

1,5 kg

275 CO/SV12Empty metal display stand

6 10,3 15 165 394 2667 11,5 15 165 394 2678 12,6 15 165 394 268

9 13,8 15 165 395 26810 15 15 180 490 50311 16,5 15 180 491 50312 17,5 18 180 493 51213 19 18 180 493 52014 20,5 20 180 495 52015 21,7 20 180 495 50016 23 21 180 496 50017 24 21 180 496 55018 24,7 23 180 500 55819 26 23 220 500 785


276T-handle wrenches with

jointed hexagonal socket Model with friction-springto allow presetting of the

socket at the desiredangle


polished head

UNI 6743

276 SE5Set of five wrenches (276/8-10-13-17-19 mm)

2,6 kg

276 SE14Set of fourteen wrenches (276/619 mm)

6,6 kg


23/26

92

WRENCHES

6 9,5 15 165 398 2257 10,7 15 165 398 2238 12 15 165 398 2289 13,2 15 165 398 226

10 14,6 15 175 431 33211 15,8 15 175 431 33012 17 18 175 434 33513 18,7 18 175 466 42014 20,7 20 175 466 50015 20,9 20 180 497 55016 22,2 21 180 499 57817 23,4 21 180 499 56018 24,7 23 180 501 570

19 26 23 220 523 85020 27,3 26 220 526 85021 28,5 26 220 526 85522 29,7 26 220 526 86524 32,5 28 220 531 890

W a b c L mm mm mm mm mm gr276 CET-handle wrenches with jointed

hexagonal socket Universal joint model with

friction-spring to allowpresetting of the socket atthe desired angle


polished head

UNI 6743 ISO 2236 DIN 896

276 CE/SE5Set of five wrenches(276 CE/8-10-13-17-19 mm)

2,4 kg

276 CE/SE18Set of eighteen wrenches(276 CE/624 mm)

9,5 kg

Functionality and user-friendlinessThe compact size of the jointand the stable positioning ofthe socket guarantee smoothoperations even on screwsand nuts which are difficult toreach.

The sockets, equipped withthe profile, have adeep opening to ensure asecure and effective hold onthe nut.

Check the online catalog on the Usag web site. You will findinstructions for use and technical information about USAG products.www.usag-tools.com


24/26

93

WRENCHES

SYSTEMT-wrenches with theSYSTEM are equipped witha patented system for holding

and releasing screws andbolts. The nut, once it hasbeen inserted in the socket,is retained by a spring whichprevents it from falling out.To extract it, it is sufficient tolift the end of the springslightly because this releases the hold on the nut,which will then come out easily.

8 12 15 165 398 22510 14,6 15 175 431 33013 18,7 18 175 466 43817 23,4 21 180 499 59919 26 23 220 523 868


276 CEBT-handle wrenches with

jointed hexagonal socket withblock system Universal joint model with

friction-spring to allowpresetting of the socket at thedesired angle


polished head

UNI 6743

276 CEB/SE5Set of five wrenches(276 CEB/8-10-13-17-19 mm)

2,5 kg

810

131719

Wmm

276 CEBMSparesprings

E6 5,74 8 5 165 399 220E7 6,22 8,5 6 165 399 222E8 7,52 10 6,5 165 399 222

E10 9,42 13 7,5 175 432 330E12 11,17 15 8,5 175 432 333E14 12,90 17 10 180 499 554E16 14,76 19 11 180 499 557E18 16,70 20,5 12,5 180 499 564E20 18,45 23,5 15 220 523 850

n g a b c L mm mm mm mm mm gr

276 CTXT-handle wrenches with jointed

socket Universal joint model

with friction-spring toallow presetting of thesocket at the desiredangle


polished head

276 CTX/SE9Set of nine wrenches (276 CTX/E6E20)

3,9 kg


25/26

94

WRENCHES

6x7 10,3 11,5 11 11 18,7 18,7 189 968x9 12,6 13,9 11 11 18,7 18,7 189 101

10x11 15 16,5 15 15 21,7 21,7 195 10612x13 17,5 19 18 18 26,2 26,2 234 19514x15 20,5 21,8 20 20 28,2 28,2 238 21716x17 23 24 21 21 29,5 29,5 280 33018x19 24,7 26 23 23 30,5 34,5 286 35820x22 27,3 30,5 26 26 35,5 35,5 329 500

21x23 29,6 31,5 26 26 35,5 37,5 331 53524x27 33 36,7 28 28 43,5 43,5 381 100530x32 40,5 43 32 32 46,5 46,5 387 1104

W a b c d e f L mm mm mm mm mm mm mm mm gr297 N

double ended wrenches withsingle-jointed bihexagonal sockets Model with friction-spring

to allow presetting of thesockets at the desiredangle

Chrome Vanadium steel Chrome plated finish,

polished heads

297 N/SE7Set of seven wrenches (297 N/8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm)

1,8 kg

297 N/SE11Set of eleven wrenches (297 N/6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm)

4,4 kg

1 1040 1 115 851,5 1040 1,4 115 852 1040 1,9 115 853 1260 2,9 160 1604 1260 3,9 160 1605 1260 4,9 160 1606 14100 5,9 215 236

7 14100 6,9 215 2408 14100 7,9 215 231

10 22125 9,9 260 41512 22125 11,9 260 421

n c a L mm mm mm gr

281 C Adjustable pin-type facespanners with round pins For ring nuts with holes Chrome Vanadium steel Zinc Chrome plated finish

11,52345678

1012

n281 CRSpare pins


26/26

WRENCHES

16-18-20 1,5 2 3,5 108 2222-25-28 2 2,5 4,5 135 35

30-32 2 2,5 4,5 135 4134-36-38 2,5 3 5,5 170 87

40-42 2,5 3 5,5 170 8545-50 3 3,5 6,5 206 145

52-55 3 3,5 6,5 206 14558-62-65 3,5 4 7,5 241 23168-70-75 3,5 4 7,5 241 23080-85-90 4 5 8,5 280 351

92-95-100 4 5 8,5 280 310110-115 4 5 10 334 565120-130 4 5 10 334 575135-145 5 6 12 385 936155-165 5 6 12 385 885180-195 5 6 14 466 1785205-220 5 6 14 466 1673230-245 7 8 18 565 3500

d a b c L mm mm mm mm mm gr

282Hook wrenches withsquare pin For ring nuts Chrome Vanadium steel Zinc Chrome plated finish

UNI 6752 DIN 1810

1535 3 3,5 5 168 943550 4 4 6 202 1595080 5 5 8 280 39580120 5,5 5,5 9 345 686

120180 7,5 9,5 11 492 1427

d a b c L mm mm mm mm mm gr

282 SN Adjustable hook wrenches withsquare pin For working with a single

wrench on nuts ofdifferent sizes


1535 2,5 3 10 168 923550 3,5 4 12 202 1675080 5 5 14 280 39680120 7 6 18 345 700

120180 9 8 21 492 1520

e a b c L mm mm mm mm mm gr

282 TSN Adjustable hook wrenches withround pin For working with a single

wrench on nuts ofdifferent sizes


emm282 TSNA

Spare pins 15353550508080120

120180

Documents

Cap02 Wrenches En