CANTEX Fitting Brochure 200809

PVC Electrical Fittings & Accessories

August 2008

Did You Know?CANTEX CAN SUPPLY YOUR FULL LINE OF PVC ELECTRICAL NEEDS

301 Commerce Ste. 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 www.cantexinc.com

Call your local CANTEX Distributor or Sales Representative for more information on our full line of products!

PVC Electrical Fittings & Accessories Revised 8/2008 Price ListSchedule 40 Fittings Couplings, Female Adapters,Terminal Adapters, Standard Radius Elbows 90 45 30 PE and BE........................................6-9 Schedule 40 & 80 Special Fittings Straps, Expansion Couplings, End Bells, Reducers, Plugs, Caps, Service Entrance Caps, Box Adapters, Sch. 40 Longline Cplgs, Sch. 40 Swedged Cplg., Pull Elbows, Meter Offsets, PVC Offsets, Strain Relief Connectors..................................10-14 Schedule 40 Special Radius Elbows Plain End ................................................15 Schedule 40 Special Radius Elbows Bell End ..................................................16 Conduit Bodies, Junction Boxes, Floor Boxes & Accessories.......................17-21 Exposed Boxes and Weatherproof Covers ...................................................21-23 Schedule 80 Standard Radius Elbows Plain End .............................................24 Schedule 80 Special Radius Elbows Plain End ................................................25 Schedule 40 Split Duct and Accessories ......................................................26-27 Conduit Fittings for Type EB & DB Duct........................................................28-30 Elbows for Type EB & DB Duct Bell End....................................................31-32 Service Risers ...............................................................................................33-34 EZ GUARD Wild Life Protector ........................................................................

35

Plastic Spacers for Duct ................................................................................36-37 Bending Equipment for PVC Conduit............................................................38-39 EZ-FLEX Electrical Nonmetallic Tubings ..............................................................40 EZ Flex Electrical Nonmetallic Fittings / Nonmetallic Slab Boxes........................41 ENT Non-Metallic Electrical Boxes.......................................................................42 ENVIRO-FLEX Liquidtight Conduit.......................................................................43 ENVIRO-FLEX Liquidtight Fittings........................................................................43 Solvent Cement for PVC Conduit and Fittings, Solvent Cement for EZ-FLEX ENT.......................................................................44

CANTEX Inc 301 Commerce Ste. 2700, Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001

CANTEX PVC Electrical ProductsPVC PRODUCTSCANTEX PVC Products had its beginning over 40 years ago, as a division of a national corporation in the utility and building construction industry. The Plastics Division grew steadily in size and importance. Its product lines expanded into several major categories: Electrical distributors and contractors were provided with a broad line of PVC conduit and fittings. Power and utility companies were supplied with underground PVC duct and fittings. For the communications industry, PVC conduit and fittings were made available to telephone and cable companies for underground cable installations. Municipal public works needs were met with PVC pipe for distribution and collection. The commercial market need was fulfilled with PVC plumbing pipe. Because of its success in the PVC Products business, CANTEX caught the eye of an international organization which was planning for expansion into PVC Products in the Western Hemisphere. In February 1992, CANTEX was acquired by the respected Sumitomo Corporation, a multifaceted global business leader. Out of this acquisition the NEW CANTEX emerged, equipped with an intense philosophy of service to its customers and a renewed emphasis on product quality that targets the challenges of a new century. CANTEX is a leading producer of PVC Products, with eight manufacturing facilities located strategically from east to west across the country. These facilities feature some of the most modern production equipment and advanced process technology found anywhere in the industry. Production facilities include extrusion, injection molding, and fabrication processes to produce the broad lines of PVC Products which serve the power, utility, building construction, and communications markets.

ELECTRICAL PRODUCT LINECANTEX offers a complete line of extruded and injection molded electrical conduit, duct, fittings, accessories, switch and outlet boxes. Products include a full range of sizes in: Schedule 40 & 80 Conduit Electrical Fittings & Accessories Molded & Fabricated Forte-Duct Utility Duct NEMA TC-6 & 8 EB/DB ASTM DB-100 Duct Fittings & Accessories Elbows, Bends & Sweeps Standard & Special Radius EZ-FLEX Electrical Nonmetallic Tubing & Fittings ENVIRO-FLEX Liquidtight Conduit & Fittings Telephone Conduit Types B-C-D EZ BOX Wall and Ceiling Switch and Outlet Boxes Bending Equipment Cements

SERVICECANTEX stands for a commitment to service service that puts the customer first. We carry extensive inventories nationwide so that you get fast turnaround and complete shipments. Our efficient transportation system of hand-picked contract carriers, means on-time deliveries anywhere in the U.S. The CANTEX customer service team is staffed by professionals who provide immediate response and effective communications about orders and shipments. At the NEW CANTEX, WE WORK FOR THE CUSTOMER.

CANTEX PVC Electrical ProductsINDUSTRY ORGANIZATIONSCANTEX actively supports those organizations which set standards and promote professional practices in the electrical industry. These include NEMRA, NAED, NEMA, IAEI, IEEE, ASTM, along with other associations in the construction industry.

QUALITY ASSURANCECANTEX has a comprehensive quality control program to ensure compliance with industry standards established by Underwriters Laboratories, National Electrical Code, National Electrical Manufacturers Association, and the American Society for Testing and Materials. From virgin raw materials blended into compounds thru extrusion or injection molding to final inspection and testing of the finished product, the manufacturing process is monitored to make sure quality standards are met or exceeded. Each plant is graded and held accountable for the quality control performance of its total output. To further strengthen the companys goal for quality products, a centralized quality control review procedure assures that every plant is producing at a consistent level of quality for all similar products. You know youre getting the very best every time you buy from CANTEX.

PVC ELECTRICAL STANDARDS BY PRODUCTSchedule 40 Conduit UL 651, NEMA TC-2 and NEC-Article 352 Schedule 80 Conduit UL 651, NEMA TC-2 and NEC-Article 352 Forte-Duct UL Schedule 40 Conduit UL 651, NEMA TC-2 and NEC-Article 352 PVC Electrical Fittings All fittings for electrical applications conform to NEMA TC-3 and UL 514B & UL651 Utility Duct NEMA TC-6&8, ASTM F-512, (Type EB20 UL 651A) Utility Duct Extra Strength NEMA TC-6&8, DB-100 and ASTM F-512 Utility Duct Fittings NEMA TC-9 EZ-FLEX ENT (Electrical Nonmetallic Tubing) & Fittings UL 1653, NEMA TC-13 and NEC Article 362 ENVIRO-FLEX Liquidtight Conduit UL1660 and NEC 356 ENVIRO-FLEX Liquidtight Fittings UL 514B, NEMA FB-1 and NEC 356

Uniform Product Code Bar CodesUPC-ITFShipping container Bar Code to identity each standard Carton of Products using interleaved 2 of 5 Symbology.

Packaging Level

Number System Characters

Manufacturer I.D. Number

Item Number

Check Digit

Schedule 40 & 80 FittingsCouplingsPART NO. 6141623 6141624 6141625 6141626 6141627 6141628 6141629 6141630 6141631 6141632 6141633 6141634 *6141635D SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 STD. PKG. 200 125 70 40 30 40 20 40 30 20 10 8 1 STD. PKG. 200 125 70 40 30 40 20 40 30 20 10 8 2 STD. PKG. 200 125 70 40 30 40 20 40 30 20 10 8 1 UPC-ITF 3 00 88700 56704 8 56705 5 56730 7 56731 4 56732 1 56733 8 56734 5 56951 6 06109 6 54736 1 54737 8 54738 5 02142 7 UPC-ITF 3 00 88700 56708 6 56709 3 56747 5 56748 2 56749 9 56750 5 56751 2 52773 8 52774 5 52775 2 52776 9 52777 6 02582 1 UPC-ITF 3 00 88700 56706 2 56707 9 56738 3 56739 0 56740 6 56741 3 56742 0 56864 9 52779 0 52780 6 52781 3 52782 0 02583 8 PKG. WT 7.19 5.26 4.24 3.95 3.72 6.79 7.51 21.73 21.35 18.19 14.50 18.95 4.00 PKG. WT. 5.99 5.64 4.80 4.47 3.64 6.75 8.75 19.41 20.72 17.04 14.34 16.94 7.00 PKG. WT. 6.20 5.15 4.39 3.96 2.95 5.64 5.56 16.09 17.66 12.73 15.31 12.54 8.16

Female Adapters

PART NO. 5140043 5140044 5140045 5140046 5140047 5140048 5140049 5140050 5140051 5140052 5140053 5140054 *5140055D PART NO. 5140103 5140104 5140105 5140106 5140107 5140108 5140109 5140110 5140111 5140112 5140113 5140114 *5140115D

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8

Terminal Adapters

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8

6

* Not UL Listed

Schedule 40 Standard Radius Elbows90 Elbows Plain EndPART NO.5133823 5133824 5133825 5133826 5133827 5133828 5133829 5133830 5133831 5133832 5133835 5133834

SIZE1/2 3/4 1 1 1 2 2 3 3 4 5 6 1/4 1/2 1/2 1/2

STD. PKG.50 35 20 30 30 15 18 14 12 10 *30 *25

UPC-ITF 3 00 8870056813 56814 56815 56816 56817 56818 56819 56852 51883 51884 51886 51885 7 4 1 8 5 2 9 6 5 2 6 9

PKG. WT.5.90 6.15 6.41 16.49 21.95 18.35 39.21 53.73 63.33 72.25 389.68 519.25

45 Elbows Plain End

PART NO.5133763 5133764 5133765 5133766 5133767 5133768 5133769 5133770 5133771 5133772 5133773 5133774

SIZE1/2 3/4 1 1 1 2 2 3 3 4 5 6 1/4 1/2 1/2 1/2

STD. PKG.50 25 20 25 20 10 20 8 5 20 *30 *25

UPC-ITF 3 00 8870056807 56808 56809 56810 56811 56812 56931 56851 51830 51831 51832 51833 6 3 0 6 3 0 8 9 9 6 3 0

PKG. WT.3.75 2.63 4.10 8.63 9.35 8.33 27.00 19.42 17.04 84.05 428.00 320.35

30 Elbows Plain End

PART NO.5133755 5133744 5133745 5133746 5133747 5133748 5133749 5133750 5133751 5133775 5133753 5133754

STD. SIZE1/2 3/4 1 1 1 2 2 3 3 4 5 6 1/4 1/2 1/2 1/2

UPC-ITF PKG.50 25 20 25 50 10 20 8 5 20 *30 *25

PKG. 3 00 8870051824 51813 51814 51815 51816 51817 51818 51819 51820 51834 51822 51823 8 2 9 6 3 0 7 4 0 7 4 1

WT.2.40 2.18 3.04 6.83 7.41 4.26 21.52 15.18 13.33 68.99 266.22 322.03

22-1/2 Elbows Plain End

PART NO.5136403 5134094 5134067 5134096 5134068 5134095 5133757 5134037 5133901

SIZE1 1 2 2 3 3 4 5 6 1/4 1/2 1/2 1/2

STD. PKG.25 20 10 20 8 5 20 *60 *50

UPC-ITF 3 00 8870003165 02843 01061 02845 01062 02844 02046 02830 02808 5 3 2 7 9 0 8 3 2

PKG. WT.7.78 7.41 5.31 21.52 16.32 13.33 63.96 299.46 409.30

*Pallet quantities 7

Schedule 40 Standard Radius Elbows90 Elbows Bell EndPART NO.5233823 5233824 5233825 5233826 5233827 5233828 5233829 5233830 5233831 5233832 5233835 5233834

SIZE1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

STD. PKG.50 35 20 30 30 15 18 14 12 10 *30 *25

UPC-ITF 3 00 8870001195 4 01196 1 01197 8 53766 9 53767 6 53768 3 53769 0 53770 6 53771 3 53772 0 53774 4 53773 7

PKG. WT.6.50 7.11 7.04 18.96 24.06 18.99 41.02 51.41 58.90 65.63 376.38 468.95

45 Elbows Bell End

PART NO.5233763 5233764 5233765 5233766 5233767 5233768 5233769 5233770 5233771 5233772 5233773 5233774

SIZE1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

STD. PKG.50 25 20 25 20 10 20 8 5 20 *30 *25

UPC-ITF 3 00 8870001201 2 01202 9 01203 6 53739 3 53740 9 53741 6 53742 3 53743 0 53744 7 53745 4 53746 1 53747 8

PKG. WT.4.55 3.48 4.74 9.73 9.90 8.36 29.72 17.95 14.73 83.56 204.99 204.99

30 Elbows Bell End

PART NO.5233748 5233750 5233751 5233776 5233753 5233754

SIZE2 3 3 1/2 4 5 6

STD. PKG.10 8 5 20 *30 *50

UPC-ITF 3 00 8870002978 2 02979 9 02391 9 02394 0 02980 5 02981 2

PKG. WT.5.47 16.00 12.27 63.06 175.98 238.72

22-1/2 Elbows Bell End

PART NO.5234097 5236402 5236403 5234094 5234067 5234096 5234068 5234095 5233867 5234037 5233901

SIZE3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

STD. PKG.25 20 25 20 10 10 8 5 20 *60 *50

UPC-ITF 3 00 8870004009 1 03173 0 03174 7 03166 2 02209 7 03032 0 02210 3 03161 7 01064 3 03027 6 01894 6

PKG. WT.4.73 2.96 12.35 11.83 5.31 12.88 16.32 10.00 38.76 299.46 409.30

*Pallet Quantities8

Elbow Dimensions

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

A .840 1.050 1.315 1.660 1.900 .275 2.875 3.500 4.000 4.500 5.563 6.625

Plain End B MIN 1-1/2 1-1/2 1-7/8 2 2 2 3 3-1/8 3-1/4 3-3/8 3-5/8 3-3/4

Bell End B MIN 3/4 3/4 7/8 1 1-1/8 1-1/8 1-1/2 1-5/8 1-3/4 1-3/4 2 2-1/8

C MIN 4 4-1/2 5-3/4 7-1/4 8-1/4 9-1/2 10-1/2 13 15 16 24 30

9

Schedule 40 & 80 Special FittingsTwo-Hole Pipe StrapsPART NO. 5133736 5133737 5133738 5133733 5133734 5133735 5133739 5133740 5133353 SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 STD. PKG. 300 200 200 200 200 200 100 100 100 UPC-ITF 3 00 88700 56794 9 56795 6 56796 3 56797 0 56798 7 56799 4 56700 0 51812 5 51726 5 PKG. WT. 2.05 2.45 3.60 4.60 5.55 7.55 8.35 10.57 12.87

Expansion Couplings One Piece

PART NO. 5144026 5144015 5144016 5144017 5144018 5144019 5144020 5144021 5144023

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

STD. PKG. 50 50 50 25 25 25 5 10 5

UPC-ITF 3 00 88700 52847 6 52836 0 52837 7 52838 4 52839 1 52840 7 52841 4 52842 1 52844 5

PKG. WT. 5.20 8.15 12.00 8.70 9.20 14.60 4.35 14.13 11.12

1/2 through 3/4 Maximum Expansion 1 through 1-1/2 Maximum Expansion 5

2 through 3 4 Maximum Expansion 6 3-1/2 through 4 Maximum Expansion 7 STD. PKG. 25 10 10 5 5 25 12 12 6 6 1 1 UPC-ITF 3 00 88700 54772 9 54773 6 54774 3 54775 0 54776 7 54777 4 54778 1 54779 8 54780 4 54781 1 54782 8 54783 5 PKG. WT. 12.68 4.75 8.03 5.27 7.11 51.32 45.11 38.27 51.32 27.35 6.27 8.27

Expansion Couplings Two Piece

PART NO. 5144031 5144032 5144033 5144034 5144035 5144036 5144037 5144038 5144039 5144040 5144041 5144042

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

1/2 through 2 Maximum Expansion 4

2 1/2 through 6 Maximum Expansion 8 STD. PKG. 135 UPC-ITF 3 00 88700 04201 9 PKG. WT. 675.00

Expansion Couplings Two Piece w/Molded Male Adapter

PART NO. 5144029

SIZE 2 1/2

10

Schedule 40 & 80 Special FittingsEnd BellsPART NO. 5144003 5144004 5144005 5144006 5144007 5144008 5144009 5144010 5144011 5144012 5144013 5144014 SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 STD. PKG. 100 100 50 50 50 40 30 50 50 50 25 15 UPC-ITF 3 00 88700 52824 7 52825 4 56712 3 56713 0 56714 7 56715 4 56728 4 56850 2 52832 2 52833 9 52834 6 52835 3 PKG. WT. 2.25 2.65 2.30 2.65 4.30 3.60 4.27 8.97 13.42 16.37 12.62 9.32

Reducers

PART NO. 5142220 5142221 5142222 *5142223 *5142224 *5142225 *5142226 *5142227 *5142229

SIZE 3/4 x 1/2 1 x 3/4 1-1/4 x 1 1-1/2 x 1-1/4 2 x 1-1/2 2-1/2 x 2 3 x 2-1/2 4 x 3 4 x 3-1/2

STD. PKG. 100 100 50 50 25 25 25 20 20

UPC-ITF 3 00 88700 56710 9 56711 6 56743 7 56744 4 56745 1 56746 8 52794 3 52795 0 52796 7

PKG. WT. 2.15 3.35 3.40 3.35 3.65 5.75 9.58 11.08 9.68

* CSA Listed Poly PlugsPART NO. 5315248 5315250 5315252 5315253 5315254 STD. PKG. 70 70 90 45 30 UPC-ITF 3 00 88700 53854 3 53855 0 53856 7 53857 4 53858 1 PKG. WT. 5.30 9.77 18.55 13.88 9.56

SIZE 2 3 4 5 6

Poly Plugs with Pulling Eye

PART NO. 5315258 5315260 5315262 5315263 5315264

SIZE 2 3 4 5 6

STD. PKG. 70 45 80 45 35

UPC-ITF 3 00 88700 53859 8 53861 1 53862 8 53863 5 53864 2

PKG. WT. 5.68 6.77 16.66 13.88 10.93

11

Schedule 40 & 80 Special FittingsSch 40 Longline Coupling No Center Stop (Repair Coupling) (Fabricated)PART NO. 6141702 6141703 6203000 6203002 6203005 6203006 6203007 6203009 6203010 STD. PKG. 20 20 20 20 25 25 15 8 4 UPC-ITF 3 00 88700 02423 6 02685 8 02057 4 02341 3 02057 4 02342 0 02059 8 02060 4 02343 7 PKG. WT. 3.20 6.00 5.82 9.30 25.00 31.25 22.50 20.00 14.00

SIZE 1 1-1/2 2 2-1/2 3 3-1/2 4 5 6

Sch 40 Longline Coupling with Center Stop (Molded)

PART NO. 6202000 6202002 6202005 6202010 6202015 6202016

SIZE 2 2-1/2 3 4 5 6

STD. PKG. 20 25 25 15 8 4

UPC-ITF 3 00 88700 53986 1 02372 8 53987 8 53988 5 02055 0 02056 7

PKG. WT. 6.37 11.63 17.35 22.43 27.76 10.00

Sch 40 Swedged Coupling (Fabricated)

PART NO. 6201001 6201000 6151470 6141720

SIZE 2 4 5 6

STD. PKG. 20 15 8 4

UPC-ITF 3 00 88700 03415 0 03404 4 02686 5 03402 0

PKG. WT. 15.20 22.50 20.00 13.00

Sch 40 Split Sleeve Coupling (Fabricated)

PART NO. 6141684 6141690 6141692 6141693

SIZE 2 4 5 6

STD. PKG. 20 15 8 4

UPC-ITF 3 00 88700 01070 4 01071 1 01075 9 01076 6

PKG. WT. 3.12 12.62 10.50 8.80

End Bells(Fabricated)

PART NO. 5124010 5124012 5124014 5124015 5124017 5143987D

SIZE 2 3 4 5 6 8

STD. PKG. 50 50 50 25 15 1

UPC-ITF 3 00 88700 50953 6 50954 3 50955 0 50956 7 50957 4 02143 4

PKG. WT. 11.77 23.51 43.34 35.71 23.04 5.14

12

Schedule 40 & 80 Special FittingsCapsPART NO. 5140031 5140032 5140033 5140034 5140035 5140037 5140038 5140039 5140036 5140040 5140041 5140042 STD. PKG. 100 100 50 25 25 50 25 25 25 25 25 10 UPC-ITF 3 00 88700 52761 5 52762 2 52763 9 52764 6 52765 3 52767 7 52768 4 52769 1 52766 0 52770 7 52771 4 52772 1 PKG. WT. 2.95 5.45 4.00 2.68 3.68 9.45 8.93 13.18 17.17 22.25 26.15 18.48

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

Service Entrance Caps

PART NO. 5133590 5133591 5133741 5133742 5133695 5133743 5133696 5133697 5133698 5133699

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4

STD. PKG. 10 10 20 20 20 5 5 5 5 1

UPC-ITF 3 00 88700 51743 2 51744 9 56957 8 56735 2 56736 9 56737 6 06114 0 51782 1 51783 8 51784 5

PKG. WT. 1.10 1.40 4.55 8.55 10.55 5.55 25.79 22.54 21.64 15.69

Box Adapters

PART NO. 5133715 5133716 5133717 5133718 5133719 5133720 * 5133721 5133722 * 5133723 * 5133724 * CSA Listed

SIZE 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4

STD. PKG. 100 100 100 50 50 25 10 10 10 10

UPC-ITF 3 00 88700 56724 6 56725 3 56726 0 56727 7 06265 9 56958 5 51800 2 51801 9 51802 6 51803 3

PKG. WT. 1.65 3.05 3.60 2.45 3.05 2.60 2.29 3.58 4.65 4.58

13

Schedule 40 & 80 Special FittingsPull ElbowsPART NO. 5240100 5240101 SIZE 1/2 3/4 STD. PKG. 75 50 UPC-ITF 3 00 88700 56789 5 56790 1 PKG. WT. 6.48 6.05

Meter Offsets

PART NO. 5133183 5133185

SIZE 1 1/4 2

STD. PKG. 15 8

UPC-ITF 3 00 88700 56756 7 56757 4

PKG. WT. 1.90 2.08

PVC Offsets

PART NO. 5133188 5133189

SIZE 1/2 3/4

STD. PKG. 25 25

UPC-ITF 3 00 88700 56917 2 56918 9

PKG. WT. 2.43 3.08

Strain Relief Connectors

PART NO. 5133430 5133431

SIZE 1/2 3/4

STD. PKG. 25 25

UPC-ITF 3 00 88700 01110 7 01111 4

PKG. WT. 3.80 3.80

Threaded with lock nut and washer Includes 3 round and 3 oval grommets

Sealing WashersUse with Terminal Adapters for Concrete Tight Connection

PART NO. 5163370 5163371 5163372 5163374 5163373 5163375

SIZE 1/2 3/4 1 1-1/4 1-1/2 2

STD. PKG. 150 125 100 50 25 50

UPC-ITF 3 00 88700 06281 9 06282 6 06283 3 52883 4 52882 7 52884 1

PKG. WT. .17 .27 .53 .17 .27 .17

14

Schedule 40 Special Radius ElbowsPlain EndSIZE BEND DEGREE 18 RADIUS PART NUMBER 24 RADIUS. 30 RADIUS 36 RADIUS 48 RADIUS 60 RADIUS

90

5133846 5134008 5133916 5133944 5133923 5136344 5133794 5136424 5133839 5133840 5133917 5133908 5133844 5133797 5133789 5133879 5133856 5133973 5133752 5133936 5133858 5133799 5133969 5133845 Use Standard Radius (15) Use Standard Radius (16)

5133859 5133875 5136435 5136420 5133883 5133941 5133913 5136425 5133873 5133874 5133803 5136428 5133836 5133815 5133796 5133915 5133847 5133935 5133957 5134019 5133837 5133800 5133958 5133903 5133893 5133802 5136439 5133902 5133822 5133812 5133788 5133869

5136340 5136341 5136342 5136421 5133878 5136345 5136346 5136426 5133921 5136348 5136349 5136429 5133920 5133918 5136350 5136432 5133981 5133896 5136351 5136433 5133867 5133897 5136495 5133929 5133948 5133784 5136353 5136436 5133850 5133953 5133898 5133882 5133872 5133954 5133899 5133900

5133852 5133919 5136423 5133975 5133884 5133956 5136347 5133997 5133866 5133810 5133974 5134103 5133848 5133778 5133792 5133851 5133857 5133801 5133807 5133937 5133820 5133779 5133793 5133904 5133818 5133939 5133938 5136437 5133821 5133777 5133790 5133853 5133841 5133780 5133931 5133881 5133877 5133880 5133791 5133905 5133988D

5133864 5133940 5136343 5136422 5133871 5133942 5133943 5136427 5133865 5133811 5133982 5136431 5133876 5133798 5133805 5133984 5133849 5134010 5136435 5136434 5133817 5133781 5133809 5133971 5133892 5133979 5134026 5136438 5133843 5133776 5133838 5133932 5133842 5133814 5133959 5133930 5133816 5133813 5133861 5133862 5133993D 5133989D 5133870D 5133854 5133946 5133999 5134012 5133885 5133947 5133962 5134020 5133886 5133806 5133782 5134065 5133925 5133819 5134006 5134013 5134046 5134111 5133786

1

45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2 90 45 30 22-1/2

1 1/4

1 1/2

2

2 1/2

3

3 1/2

4

5

Use Standard Radius (24)

6


*8

Note:

(1) (2) (3) (4)

Orders for special radius elbows are noncancelable and nonreturnable. Elbows are plain end. Larger radius are available on request. Other degree bends are available on request.

* Not UL Rated

15

Schedule 40 Special Radius Elbows

Belled End

PART NO.SIZEDEGREE BEND

18 RADIUS

24 RADIUS

36 RADIUS

48 RADIUS

902

5233846 5233797 5233856 5233973 5233850 5233799Use Standard Radius (15)

5133924 5233815 5233847 5233935 5233837 5233800 5233893 5233802 5233822 5233812

5233848 5233778 5233857 5233801 5233930 5233779 5233818 5233939 5233842 5233777 5233841 5233780 5233877 5133894

5233876 5133759 5233849 5233785 5233817 5233782 5233892 5233943 5233843 5133761 5233868 5233781 5233816 5233813

45

2 1/2

90 45 90

345 90 45 90

3 1/2

445 90


545 90


645


Note: (1) Orders for special radius elbows are non-cancelable and non-returnable. (2) Elbows belled one end. (3) Larger radius available on request. (4) Other degree bends available on request.

16

Conduit Bodies and Junction BoxesType LBPART NO. 5133663 5133664 5133665 5133666 5133667 5133668 5133669 5133670 5133671 5133672 STD. PKG. 25 15 10 10 10 5 5 5 4 4 UPC-ITF 3 00 88700 56764 2 56765 9 56766 6 56767 3 56701 7 56768 0 06547 6 06548 3 06549 0 06550 6 PKG. WT. 5.38 4.32 3.01 7.62 9.55 8.49 23.11 23.18 28.05 25.47

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4

Type LL

PART NO. 5133660 5133661 5133662 5133649 5133648 5133647 5133644 5133646 5133640 5133645

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4

STD. PKG. 25 15 10 10 10 5 5 5 4 4

UPC-ITF 3 00 88700 56769 7 56770 3 56771 0 06564 3 06565 0 56772 7 51756 2 51758 6 51755 5 51757 9

PKG. WT. 5.43 4.32 4.21 7.81 9.85 8.17 25.56 19.89 29.87 20.05

Type LR

PART NO. 5133650 5133651 5133652 5133653 5133654 5133655 5133658 5133656 5133659 5133657

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4

STD. PKG. 25 15 10 10 10 5 5 5 4 4

UPC-ITF 3 00 88700 56773 4 56774 1 56775 8 06584 1 06585 8 56776 5 51761 6 51759 3 51762 3 51760 9

PKG. WT. 5.43 4.36 4.21 7.72 9.64 8.18 25.56 24.18 29.87 26.45

17

Conduit Bodies and Junction Boxes

Type T

PART NO. 5133563 5133564 5133565 5133566 5133567 5133568 5133569 5133570 5133572 5133571

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4

STD. PKG. 25 15 10 10 10 5 2 2 1 1

UPC-ITF 3 00 88700 56783 3 56784 0 56785 7 56786 4 56787 1 56788 8 06607 7 51740 1 51742 5 51741 8

PKG. WT. 5.18 4.27 4.12 7.62 9.80 9.17 11.25 10.41 10.20 8.98

Type C

PART NO. 5133101 5133102 5133103 5133104 5133105 5133106 5133108 5133107 5133110 5133109

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4

STD. PKG. 25 15 10 10 10 5 5 5 4 4

UPC-ITF 3 00 88700 56758 1 56759 8 56760 4 56761 1 56762 8 56763 5 51713 5 51712 8 51715 9 51714 2

PKG. WT. 5.18 4.23 4.08 7.35 9.39 8.04 23.12 23.52 29.37 26.45

Type E

PART NO. 5133151 5133152 5133153 5133154 5133155 5133156 5133157 5133158 5133160 5133159

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4

STD. PKG. 25 15 10 10 10 5 5 5 4 4

UPC-ITF 3 00 88700 06521 6 06522 3 06523 0 06524 7 06525 4 06526 1 06527 8 06528 5 06529 2 06530 8

PKG. WT. 5.08 4.09 3.89 7.37 9.11 8.01 21.00 19.97 23.56 27.97

18

Conduit Bodies and Junction BoxesRound Junction BoxPART NO. 5133690 SIZE 1/2 & 3/4 STD. PKG. 15 UPC-ITF 3 00 88700 56793 2 PKG. WT. 12.97

Junction Boxes

PART NO. *5133705 *5133709 5133707 5133706 *5133710 *5133711 *5133712 *5133164 5133708 5133714 *5133713 **5133163 5133165 5133166 5133173

SIZE 4x4x2 4x4x4 4x4x6 5x5x2 6x6x4 6x6x6 8x8x4 8x8x6 8x8x7 12x12x4 12x12x6 16x14x6 24x18x8 24x24x8 36x24x8

STD. PKG. 10 10 10 10 10 5 5 4 4 2 2 1 1 1 1

UPC-ITF 3 00 88700 51790 6 51794 4 51792 0 51791 3 51795 1 51796 8 51797 5 51719 7 51793 7 51799 9 51798 2 51718 0 51720 3 51721 0 54758 3

PKG. WT. 8.14 10.57 15.00 10.82 20.79 11.69 16.46 15.30 20.93 14.93 15.91 11.94 20.00 24.50 45.00

* CSA Listed ** UL Listed with only a Type 1 NEMA Rating Not UL Listed

Duplex Boxes and Cover

PART NO. 5133760 5133758

SIZE / DESCRIPTION4-3/4 Hubs, 4-3/4 to 1/2 Reducers, Level Ring & Pour Cover, U.L. Listed 2-3/4 Hubs, 2-1 Hubs, 2-3/4 to 1/2 Reducers, 2-1 to 3/4 Reducers, Level Ring and Pour Cover. U.L. Listed

STD. PKG. 9 9

UPC-ITF PKG. 3 00 88700 WT. 56927 1 56926 4 16.67 16.67

Floor Box Base

Floor Box Base

5133678

Duplex Cover-BRONZE

10

51768 5

4.38

19

Exposed BoxesType FD-BlankPART NO. 5133420 SIZE STD. PKG. 10 UPC-ITF 3 00 88700 01266 1 PKG. WT. 1.26

Type FSE

PART NO. 5133363 5133364 5133365

SIZE 1/2 3/4 1

STD. PKG. 10 10 10

UPC-ITF 3 00 88700 56777 2 56780 2 56778 9

PKG. WT. 4.27 4.25 4.02

For damp and wet locations with approved cover.

Two-Gang Type FSE

PART NO. 5133380 5133381 5133382

SIZE 1/2 3/4 1

STD. PKG. 5 5 5

UPC-ITF 3 00 88700 01100 8 01101 5 01102 2

PKG. WT. 4.55 4.55 4.55

Type FSC

PART NO. 5133463 5133464 5133465

SIZE 1/2 3/4 1

STD. PKG. 10 10 10

UPC-ITF 3 00 88700 56779 6 56782 6 56781 9

PKG. WT. 4.75 4.50 4.21


Two-Gang Type FSC

PART NO. 5133370 5133371 5133372

SIZE 1/2 3/4 1

STD. PKG. 5 5 5

UPC-ITF 3 00 88700 01097 1 01098 8 01099 5

PKG. WT. 4.40 4.40 4.40

Type FSS

PART NO. 5133540 5133542 5133543

SIZE 1/2 3/4 1

STD. PKG. 10 10 10

UPC-ITF 3 00 88700 56702 4 56703 1 56792 5

PKG. WT. 4.53 4.26 4.02


Two-Gang Type FSS

PART NO. 5133390 5133391 5133392

SIZE 1/2 3/4 1

STD. PKG. 5 5 5

UPC-ITF 3 00 88700 01103 9 01104 6 01105 3

PKG. WT. 4.40 4.40 4.40

20

Exposed BoxesType FSCCPART NO. 5133544 5133545 5133546 SIZE 1/2 3/4 1 STD. PKG. 10 10 10 UPC-ITF 3 00 88700 51732 6 51733 3 51734 0 PKG. WT. 4.97 4.58 4.20


Two-Gang Type FSCC

PART NO. 5133400 5133401 5133402

SIZE 1/2 3/4 1

STD. PKG. 5 5 5

UPC-ITF 3 00 88700 01106 0 01107 7 01108 4

PKG. WT. 2.61 2.42 2.23

Type FDC

PART NO. 5133310 5133311 5133312

SIZE 1/2 3/4 1

STD. PKG. 10 10 10

UPC-ITF 3 00 88700 01086 5 01087 2 01088 9

PKG. WT. 5.88 5.88 5.88


Type FDE

PART NO. 5133300 5133301 5133302

SIZE 1/2 3/4 1

STD. PKG. 10 10 10

UPC-ITF 3 00 88700 01083 4 01084 1 01085 8

PKG. WT. 5.88 5.88 5.88


Note: Self tapping screws included with all boxes

Weatherproof Box CoversBlank CoverPART NO. 5133362 SIZE STD. PKG. 50 UPC-ITF 3 00 88700 56800 7 PKG. WT. 4.40

Two-Gang Blank Cover

PART NO. 5133410

SIZE

STD. PKG. 25

UPC-ITF 3 00 88700 01109 1

PKG. WT. 4.40

21

Weatherproof Box CoversSwitch CoverPART NO. 5133361 SIZE STD. PKG. 10 UPC-ITF 3 00 88700 56804 5 PKG. WT. 3.25

Wet locations when cover closed.

Single Toggle Switch Cover

PART NO. 5133330

SIZE

STD. PKG. 10

UPC-ITF 3 00 88700 01092 6

PKG. WT. 2.90


Single Receptacle Cover

PART NO. 5133350 5133320 5133321 5133322

SIZE 15 amp 20 amp 30 amp 50 amp

STD. PKG. 10 10 10 10

UPC-ITF 3 00 88700 56803 8 01089 6 01090 2 01091 9 Hole Diameter 1.375 (1-3/8) 1.625 (1-5/8) 1.722 (1-23/32) 2.187 (1-3/16) UPC-ITF 3 00 88700 56802 1

PKG. WT. 3.15 2.90 2.90 2.90

Description 15 amp 20 amp 30 amp 50 amp

GFI Receptacle Cover

PART NO. 5133348

SIZE

STD. PKG. 10

PKG. WT. 3.05


GFI & Toggle Switch Cover

PART NO. 5133345

SIZE

STD. PKG. 10

UPC-ITF 3 00 88700 01095 7

PKG. WT. 4.42


Duplex Receptacle Cover

PART NO. 5133352

SIZE

STD. PKG. 10

UPC-ITF 3 00 88700 56791 8

PKG. WT. 3.20


22

Weatherproof Box CoversDouble Toggle Switch CoverPART NO. 5133331 SIZE STD. PKG. 10 UPC-ITF 3 00 88700 01093 3 PKG. WT. 4.15


Duplex & Toggle Switch Cover

PART NO 5133337

SIZE

STD. PKG. 10

UPC-ITF 3 00 88700 01096 4

PKG. WT. 4.57


Double Duplex Receptacle Cover

PART NO 5133347

SIZE -

STD. PKG. 10

UPC-ITF 3 00 88700 01190 9

PKG. WT. 3.00


Single Plunger Switch Cover

PART NO. 5133335

SIZE

STD. PKG. 10

UPC-ITF 3 00 88700 01094 0

PKG. WT. 2.90


In-Use Weatherproof CoversSingle Gang In-UsePART NO. 5133692 5133694 DEPTH 2-1/4 3-1/8 STD. PKG. 6 6 UPC-ITF 3 00 88700 04042 8 04043 5 PKG. WT. 19.98 27.96


Two Gang In-Use

PART NO. 5133693

DEPTH 2-1/4

STD. PKG. 6

UPC-ITF 3 00 88700 01962 2

PKG. WT. 3.30


23

Schedule 80 Standard Radius Elbows90 Elbows Plain EndPART NO. 5121053 5121054 5121055 5121056 5121057 5121058 5121059 5121060 5121061 5121062 5121063 SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 STD. PKG. 50 35 20 30 30 15 18 14 10 *30 *25 UPC-ITF 3 00 88700 06321 2 06322 9 06323 6 06324 3 56752 9 56753 6 56754 3 56755 0 50745 7 50746 4 550747 PKG. WT. 7.40 5.78 8.11 21.32 28.85 26.71 50.85 64.78 93.72 589.88 1815.75

45 Elbows Plain End

PART NO. 5121003 5121004 5121005 5121006 5121007 5121008 5121009 5121010 5121011 5121012 5121013

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

STD. PKG. 50 25 20 25 20 10 20 8 20 *30 *25

UPC-ITF 3 00 88700 06341 0 06342 7 06343 4 06344 1 06345 8 06346 5 06347 2 50708 2 50709 9 50710 5 50711 2

PKG. WT. 4.70 2.94 4.84 11.25 11.99 11.21 35.21 23.37 111.66 383.36 516.65

30 Elbows Plain End

PART NO. 5121000 5121001 5121002 5121106 5121850 5121108 5121109 5121110 5121111 5121112 5121113* Pallet quantities

SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

STD. PKG. 50 25 20 25 20 10 20 8 20 *30 *25

UPC-ITF 3 00 88700 50705 1 50706 8 50707 5 50776 1 50788 4 50777 8 50778 5 50779 2 50780 8 50781 5 50782 2

PKG. WT. 3.80 4.03 6.00 8.85 8.57 7.91 28.01 18.19 67.61 318.11 416.90

24

Schedule 80 Special Radius ElbowsPlain EndSIZE DEGREE BEND90 18 RADIUS 5121846 5121971 5136504 5136630 5119822 5136511 5136516 5136640 5121848 5121037 5136535 5136650 5121099 5136551 5136553 5136660 5121027 5136561 5121064 5136670 5121079 5121032 5136572 5136680

PART NUMBER24 RADIUS 5121018 5136500 5136505 5136631 5119824 5136512 5136517 5136641 5121015 5163533 5136536 5136651 5121019 5121101 5136554 5136661 5121028 5121943 5136564 5136671 5121020 5121014 5136573 5136681 5121022 5121089 5136582 5121869 36 RADIUS 5121080 5136502 5136507 5136632 5121084 5136514 5136519 5136642 5121100 5136533 5136538 5136652 5121021 5121098 5121094 5136662 5121016 5121150 5136566 5136672 5121081 5121077 5136575 5121039 5121023 5119821 5121114 5121870 5121083 5119820 5136587 5121871 5121073 5121072 5136595 5136695 48 RADIUS 5121065 5136503 5136508 5136633 5136510 5136515 5136520 5136643 5121076 5136534 5136539 5136653 5121075 5121093 5136556 5136663 5121030 5136563 5136567 5136673 5121082 5121078 5136576 5136682 5121024 5121091 5121123 5121872 5121025 5121948 5121115 5136690 5121026 5119830 5136596 5136696 60 RADIUS 5136920 5136820 5136720 5136634 5136930 5136830 5136730 5136644 5121102 5136840 5136740 5136654 5121086 5136850 5136750 5123728 5136960 5136860 5136760 5136674 5136970 5136810 5136770 5136683 5121085 5121122 5136775 5136686 5121017 5136880 5136780 5136691 5121087 5121117 5136735 5121118

1

45 30 22-1/2 90

1

1/ 4

45 30 22-1/2 90

1 1/2

45 30 22-1/2 90

2

45 30 22-1/2 90

2 1/2

45 30 22-1/2 90

3

45 30 22-1/2 90

4

45 30 22-1/2 90

5

45 30 22-1/2 90

6

45 30 22-1/2

Note: (1) Orders for special radius elbows are non-cancelable and non-returnable. (2) Larger radius available on request. (3) Other degree bends available on request.

25

Split Duct Allows repair of damaged conduit in existing installations. No cutting and splicing of cables saves time and money.

Sch 40 Split Duct - 10 lengthPART NO. A52CAZS A52CEZS A52DAZS A52DEZS A52EAZS A52FAZS A52GAZS RUS Listed SIZE 2 2-1/2 3 3-1/2 4 5 6 O.D. 2.375 3.068 3.500 4.192 4.500 5.563 6.625 STD. PKG. 700 460 600 290 290 230 130 UPC-ITF 3 00 88700 01066 7 03626 1 03627 8 03628 5 01067 4 01068 1 01069 8 PKG. WT. 598.02 622.68 1,036.09 597.40 704.12 736.00 547.69

Sch 80 Split Duct - 10 lengthPART NO. A53CAZS A53EAZS RUS Listed SIZE 2 4 O.D. 2.569 4.691 STD. PKG. 700 290 UPC-ITF 3 00 88700 03629 2 03630 8 PKG. WT. 822.53 977.30

Type C Telephone Split Duct - 10 lengthPART NO. A94EAZS RUS Listed SIZE 4 O.D. 4.545 STD. PKG. 320 UPC-ITF 3 00 88700 03631 5 PKG. WT. 489.60

26

Sch 40 Split Sweeps & Accessories

Sch 40 Split Elbow (Fabricated)

PART NO. 5133815S 5133778S 5133779S 5133798S 5133781S 5133808S 5134006S 5133946S 5134012S 5133966S 5134083S 5134157S

SIZE (in.) 2 2 3 2 3 2 3 4 4 2 3 4

SEGMENT 45 45 45 45 45 45 45 45 22-1/2 11-1/4 11-1/4 11-1/4

RADIUS (in.) 24 36 36 48 48 60 60 60 60 60 60 60

UPC-ITF 3 00 88700 03992 7 04097 8 03993 4 03994 1 03995 8 03996 5 03997 2 03985 9 03984 2 03998 9 03999 6 03983 5

PKG. WT. 1.40 2.10 4.70 2.70 6.10 3.20 7.20 10.90 5.80 1.00 3.60 5.10 PKG. WT. 3.12 12.62 10.50 8.80

Sch 40 Split Sleeve Coupling (Fabricated)

PART NO. 6141684 6141690 6141692 6141693

SIZE 2 4 5 6

STD. PKG. 20 15 8 4

UPC-ITF 3 00 88700 01070 01071 01075 01076

EB - DB Duct Split Sleeve Coupling (Fabricated)

PART NO. 6151783 6151785 6151786 6151787

SIZE 2 4 5 6

STD. PKG. 20 15 8 4

UPC-ITF 3 00 88700 04137 1 02636 1 04136 4 04139 5

PKG. WT. 3.36 15.00 11.68 11.76

Suggested Installation Instructions1. 2. 3. 4. 5. 6. 7. Position one 10 section beneath the cable. Cut another section in half, align with end of 10 section over the cable and snap into place. Apply strap approximately 1 from each end of the 5 section. Butt another 10 section tightly to the end of the 5 section over the cable, snap the sections together and apply a length of tape around both sections covering the butted joint. Apply another strap approximately 1 beyond the taped joint. Butt another 10 section tightly to the end of the 10 section under the cable. Tape the joint and apply a strap approximately 1 on both sides of the joint. Repeat procedure for length of project.

27

Conduit Fittings for Type EB & DB DuctTC-6 Coupling with Center Stop(Fabricated)

PART NO.6121617 6121628 6121630 6121632 6121633 6121634

SIZE1-1/2 2 3 4 5 6

STD. PKG.30 20 25 15 8 4

UPC-ITF 3 00 8870053936 6 53941 0 53942 7 53944 1 53945 8 53946 5

PKG. WT.5.50 4.71 13.12 13.28 11.23 8.40

TC-6 Coupling with Center Stop(Molded)

PART NO.6121636 6121637 6121638 6121639 6121640

SIZE2 3 4 5 6

STD. PKG.50 25 20 8 8

UPC-ITF 3 00 8870054789 7 54790 3 54791 0 54792 7 54793 4

PKG. WT.4.68 13.12 9.27 5.56 7.55

TC-6 Longline Sleeve Coupling(Fabricated)

PART NO.6121622 6121623 6121625 6121626 6121627 6121635

SIZE1-1/2 2 3 4 5 6

STD. PKG.30 20 25 15 8 4

UPC-ITF 3 00 8870054788 0 53937 3 53938 0 53939 7 53940 3 53947 2

PKG. WT.8.05 4.93 13.17 13.28 9.89 5.73

Sch 40 Longline Coupling with Center Stop(Molded)

PART NO.6202000 6202002 6202005 6202010 6202016

SIZE2 2-1/2 3 4 6

STD. PKG.20 25 25 15 4

UPC-ITF 3 00 8870053986 1 02372 8 53987 8 53988 5 02056 7

PKG. WT.6.37 11.63 17.35 22.43 10.00

Female Adapters

PART NO.5140047 5140048 6141629 5140050 5140052 5140053 5140054

SIZE1-1/2 2 2 1/2 3 4 5 6

STD. PKG.30 40 20 40 20 10 8

UPC-ITF 3 00 8870056749 9 56750 5 56734 5 52773 8 52775 2 52776 9 52777 6

PKG. WT.3.64 6.75 7.51 19.41 17.04 14.34 16.94

Terminal Adapters

PART NO.5140107 5140108 5140109 5140110 5140112 5140113 5140114

SIZE1-1/2 2 2 1/2 3 4 5 6

STD. PKG.30 40 20 40 20 10 8

UPC-ITF 3 00 8870056740 6 56741 3 56742 0 56864 9 52780 6 52781 3 52782 0

PKG. WT.2.95 5.64 5.56 16.09 12.73 15.31 12.54

28

Conduit Fittings for Type EB & DB Duct5 Coupling Bell to Plain EndPART NO.6151447 6151448 6151450 6151452 6151454 6151456

SIZE1-1/2 2 3 4 5 6

STD. PKG.25 20 25 15 8 4

UPC-ITF 3 00 8870053962 5 53963 2 53964 9 53965 6 53966 3 54740 8

PKG. WT.4.68 4.71 13.12 13.28 11.23 8.40

5 Coupling Bell to Plain End Schedule 40 (Molded)

PART NO.6141530 6141531

SIZE3 4

STD. PKG.25 25

UPC-ITF 3 00 8870053949 6 53950 2

PKG. WT.12.53 24.95

5 Coupling Bell to Bell

PART NO.6151462 6151457 6151458 6151459 6151460 6151461

SIZE1-1/2 2 3 4 5 6

STD. PKG.25 20 25 15 8 4

UPC-ITF 3 00 8870053972 4 53967 0 53968 7 53969 4 53970 0 53971 7

PKG. WT.4.18 4.71 13.12 13.28 10.64 7.81

TC6 Swedged Reducer Bell to Plain End (Fabricated)

PART NO.5142210 5142211 5142209

SIZE3x2 5x4 6x5

STD. PKG.25 8 4

UPC-ITF 3 00 8870002671 2 02172 4 02171 7

PKG. WT.6.25 8.00 8.00

TC6 Swedged Reducer Bell to Bell End (Fabricated)

PART NO.5142212

SIZE4x3

STD. PKG.15

UPC-ITF 3 00 8870002672 9

PKG. WT.3.75

Sch 40 Swedged Reducer Bell to Plain End (Fabricated)

PART NO.5142102 5142104 5142105 5142109 5142107 5142203

SIZE2-1/2 x 2 3x2 3 x 2-1/2 4x3 5x4 6x5

STD. PKG.20 25 25 15 8 4

UPC-ITF 3 00 8870002665 1 03083 2 02666 8 02170 0 02377 3 02669 9

PKG. WT.20.00 31.25 9.38 16.65 17.20 8.00

29

Conduit Fittings for Type EB & DB DuctStoppersPART NO.304C04B 304D04B 305C05B 306C06B

SIZE4 4-1/8 5 6

STD. PKG.50 50 28 12

UPC-ITF 3 00 8870054947 1 54948 8 54949 5 54995 2

PKG. WT.51.37 58.87 43.37 22.37

End Bells(Fabricated)

PART NO.5124010 5124012 5124014 5124015 5124017 5143987D

SIZE2 3 4 5 6 8

STD. PKG.50 50 50 25 15 1

UPC-ITF 3 00 8870050953 6 50954 3 50955 0 50956 7 50957 4 02143 4

PKG. WT.11.77 23.51 43.34 35.71 23.04 5.14

TC-6 End Bells(Molded)

PART NO.5144100 5144101 5144102 5144104 5144105 5144106 5144108 5144110

SIZE1 1-1/2 2 3 3-1/2 4 5 6

STD. PKG.50 50 40 50 50 50 25 15

UPC-ITF 3 00 8870001233 3 01234 0 01235 7 01236 4 01272 2 01237 1 01238 8 01239 5

PKG. WT.2.30 4.30 3.60 8.97 13.42 16.37 12.62 9.32

Poly Plugs

PART NO.5315248 5315250 5315252 5315253 5315254

SIZE2 3 4 5 6

STD. PKG.70 70 90 45 30

UPC-ITF 3 00 8870053854 3 53855 0 53856 7 53857 4 53858 1

PKG. WT.5.30 9.77 18.55 13.88 9.56

Poly Plugs with Pulling Eye

PART NO.5315258 5315260 5315262 5315263 5315264 `

SIZE2 3 4 5 6

STD. PKG.70 45 80 45 35

UPC-ITF 3 00 8870053859 8 53861 1 53862 8 53863 5 53864 2

PKG. WT.5.68 6.77 16.66 13.88 10.93

Caps

PART NO.5140031 5140032 5140033 5140034 5140035 5140037 5140038 5140039 5140036 5140040 5140041 5140042

SIZE1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6

STD. PKG.100 100 50 25 25 50 25 25 25 25 25 10

UPC-ITF 3 00 8870052761 5 52762 2 52763 9 52764 6 52765 3 52767 7 52768 4 52769 1 52766 0 52770 7 52771 4 52772 1

PKG. WT.2.95 5.45 4.00 2.68 3.68 9.45 8.93 13.18 17.17 22.25 26.15 18.48

30

Belled End Elbows for Type EB & DB Duct - DB 60 HM

SIZE

DEGREE BEND

18 RADIUS

24 RADIUS

36 RADIUS

48 RADIUS

60 RADIUS

90 45

5123861 5123787 5123840 5125830 5123866 5123766 5123785 5123940 5123870 5123803 5123757 5123945 5123874 5123807 5123740

5125742 5125815 5125841 5125831 5123867 5123767 5123799 5123744 5123707 5123871 5123771 5123802 5123801 5123711 5123875 5123775 5123712 5123753 5123700 5123879 5123789 5123729

5123862 5125736 5125842 5125832 5123868 5123768 5123770 5123800 5123938 5123872 5123772 5123759 5123755 5123704 5123876 5123776 5123760 5123750 5123720 5123880 5123780 5123761 5123751 5123724 5123884 5123784 5123918 5123730 5123725

5123863 5125850 5125843 5125833 5123865 5123769 5123950 5123811 5123869 5123745 5123951 5123946 5123877 5123779 5123919 5123738 5123937 5123881 5123781 5123959 5123739 5123722 5123894 5123796 5123920 5123931 5123932

5125855 5125851 5125844 5125834 5123806 5123960 5123812 5123728 5123810 5123818 5123952 5123947 5123878 5123748 5123764 5123735 5123719 5123899 5123782 5123746 5123736 5123727 5123895 5123794 5123921 5123732

1

1/ 2

30 22 1/2 11-1/4 90 45

2

30 22-1/2 11 1/4 90 45

3

30 22-1/2 11 1/4 90 45

4

30 22-1/2 11-1/4 90 45

5

30 22-1/2 11-1/4 90 45

6

30 22-1/2 11-1/4

Note: (1) Orders for special radius elbows are noncancelable and nonreturnable. (2) Elbows belled one end. (3) Other degree bends available on request.

31

Belled End Elbows for Type EB & DB Duct - DB120 HM

PART NUMBER SIZE BEND DEGREE 18 RADIUS 24 RADIUS 36 RADIUS 48 RADIUS 60 RADIUS

90 45

5125862 5125746 5125751 --5125870 5125747 ---5125874 --5125945 ------------

5125881 5125767 -5125763 5125756 5125871 5125774 -5125805 -5125875 5125753 -5125794 -5125898 -5125818 5125801 -------

5125869 5125879 5125752 5125768 5125771 5125872 5125772 5125754 5125773 5125731 5125876 5125776 5125761 5125750 5125808 5125880 5125781 5125792 5125779 5125936 5125884 5125784 -5125812 5125937

5125740 5125769 ---5125741 5125737 ---5125877 5125744 5125762 5125733 5125821 5125901 5125783 -5125780 5125944 5125885 5125796 5125813 5125931 --

5125859 ----5125873 5125748 --

2

30 22 1/2 11 1/4 90 45

3

30 22 1/2 11 1/4 90 45

5125777 5125878 5125738 5125819 5125735 5125822 5125899 5125782 5125803 5125809 -5125895 5125795 5125816 5125732 5125930

4

30 22 1/2 11 1/4 90 45

5

30 22 1/2 11 1/4 90 45

6

30 22 1/2 11 1/4

Note:

(1) Orders for special radius elbows are noncancelable and nonreturnable. (2) Elbows belled one end. (3) Larger radius available on request. (4) Other degree bends available on request.

32

Expansion CouplingsFabricated Expansion Joint (Meter Riser)PART NO. 5144028 5144030 5144043 SIZE 2 2-1/2 3 Note: STD. DESCRIPTION PKG. Exp Cplg w/Terminal Adapter 10 Exp Cplg w/Terminal Adapter Exp Cplg w/Terminal Adapter 18 6 UPC-ITF 3 00 88700 03368 0 04201 9 02384 1 PKG. WT. 19.40 69.55 20.82

(1) Overall length 28 (2) Assembled from UL listed materials. (3) Other sizes available upon request.

Service RisersCANTEX PVC Schedule 40 and 80 Service Risers provide permanent protection for underground services where they emerge from the ground to enter structures or enclosures. Formed from UL Listed CANTEX PVC Schedule 40 and 80 Conduit, these risers are resistant to impact, will not corrode, and eliminate shock hazards. Their use assures compliance with Article 300-5 of the National Electrical Code. INCLUDES TERMINAL (MALE) ADAPTER CEMENTED AT TOP END. 7 Lengths. Rated for 90C Cable.

Schedule 40PART NO. 5133726 5133728 5133730 5136008 SIZE 2 2-1/2 3 4 STD. PKG. 140 135 81 51 UPC-ITF 3 00 88700 51805 7 51807 1 51809 5 51804 0 PKG. WT. 698.46 1075.28 933.04 839.36

Schedule 80PART NO. 5133729 5133727 5133731 5133732 Note: SIZE 2 2-1/2 3 4 STD. PKG. 140 135 81 51 UPC-ITF 3 00 88700 51808 8 51806 4 51810 1 51811 8 PKG. WT. 952.28 1407.92 1249.99 1152.80

(1) Overall length 7 (84). (2) 2 size is stocking item. (3) Assembled from UL listed materials. (4) Other sizes available upon request.

33

Service Risers

CANTEX PVC Schedule 40 and DB 120 Service Risers with a 45 bend provide permanent protection for underground services where they emerge from the ground. The 45 bend eliminates the cost, time and labor to install a separate elbow. Formed from UL Listed CANTEX Schedule 40 and DB-120 conduit that are resistant to impact and UV light, their use assures compliance with Article 300-5 of the National Electrical Code.

Risers (Hockey Sticks)PART NO. 5283766 5283768 SIZE 1 2 DESCRIPTION DB120 45 SCH40 45 STD. PKG. 1 1 UPC-ITF 3 00 88700 03059 7 03060 3 PKG. WT. 2.00 2.00

CANTEX PVC Schedule 80 Service Risers with a 45 bend provide permanent protection for underground services where they emerge from the ground. The 45 bend eliminates the cost, time and labor to install a separate elbow. Formed from UL Listed CANTEX Schedule 80 conduit that are resistant to impact and UV light, their use assures compliance with Article 300-5 of the National Electrical Code.

Schedule 80PART NO. 5122030 5122035 5122032 5122039 5122037 5122033 5122038 34 SIZE 2 2-1/2 3 4 2-1/2 3 4 DESCRIPTION 45 X 24 Radius w/60 Riser 45 X 24 Radius w/63.5 Riser 45 X 24 Radius w/60 Riser 45 X 24 Radius w/60 Riser 45 X 24 Radius w/80 Riser 45 X 24 Radius w/80 Riser 45 X 24 Radius w/80 Riser STD. PKG. 1 1 1 1 1 1 1 UPC-ITF 3 00 88700 01671 3 01674 4 01673 7 02751 1 02749 8 02746 7 02750 4 PKG. WT. 5.14 7.91 11.12 16.13 10.47 14.79 16.13

EZ GUARD

AVOID UNNECESSARY POWER OUTAGESWildlife is a major cause of power interruptions that cost utility companies many extra manhours for emergency repairs and equipment replacement. These power outages can be prevented by installing the CANTEX EZ GUARD. The EZ GUARD covers the energized bushing of the line devices, protecting it from the curious critters. The EZ GUARD is certified for 25 KV use per IEEE Test 1656 and is UV resistant. The unique hinge and locking design make installation a snap and the guard is re-useable. For more information, contact your CANTEX Sales Representative.Part Number EZGUARD Carton Carton UPC-ITF Qty. Weight 20 8.572 lbs. 30088700958778Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 www.cantexinc.com

CANTEX INC. 301 Commerce Suite 2700

35

Plastic Spacers for DuctVertical and Horizontal Interlocking

Intermediate Spacers

SEPARATION 1 PIPE SIZE2 3 4 5 6 5336017 70 12

1 1/2 PART NO.5336000 5336016 5336021 5336028 5336038

2 PART NO.5336018 5336020 5336019 5336029 5336050

3 PART NO.5336032 5336031 5336024 5336030 5336041

PART NO.

STD. PKG. PKG. WT.

STD. PKG. PKG. WT.120 100 60 50 50 18 17 14 12 13

STD. PKG. PKG. WT.100 80 60 50 40 16 15 13 13 11

STD. PKG.80 60 50 30 30

PKG. WT.16 14 13 10 10

Base Spacers

SEPARATION 1 PIPE SIZE2 3 4 5 6 5335971 70 12

1 1/2 PART NO.5335961 5335963 5335968 5335980 5336039

2 PART NO.5335977 5335964 5335967 5335976 5336051

3 PART NO.5335979 5335975 5335969 5335978 5336040

PART NO.

STD. PKG. PKG. WT.

STD. PKG. PKG. WT.100 90 50 50 50 15 15 10 12 16

STD. PKG. PKG. WT.100 80 50 60 50 15 14 11 14 13

STD. PKG.100 60 60 50 40

PKG. WT.18 12 13 13 12

36

Plastic Spacers for DuctVertical and Horizontal Interlocking For completely enclosed and locked-in duct banks They snap together vertically for fast, secure field assembly. Only two components, base and intermediate, are needed. Banding is not necessary. With the Vertical-Lock spacer, ducts are accurately separated. Spacers lock firmly together, preventing separation while workman walk atop the bank. Alignment of the duct bank sections is relatively easy with this completely locked-in construction. To prevent the top tier from floating during encased burial, it is suggested that an intermediate spacer be used as a cap. Used in both EB and DB installations. Vertical and horizontal interlocking permits building a strong, locked-in duct bank. A wide baseplate provides solid support for heaviest loads.

Intermediate and Base Spacer Dimensions 1 SEPARTATION R 2 3 4 5 6 2.3 5.6 1.0 A C 1-1/2 SEPARTATION R A C 1.5 1.5 1.5 1.5 1.5 2 SEPARTATION R 1.2 1.8 2.3 2.9 3.4 A 4.5 5.6 6.6 7.9 8.7 C 2.0 2.0 2.0 2.0 2.0 3 SEPARTATION R 1.2 1.8 2.3 2.9 3.4 A 5.5 6.6 7.6 8.9 9.8 C 3.0 3.0 3.0 3.0 3.0

NOMINAL SIZE

1.2 4.0 1.8 5.1 2.3 6.1 2.9 7.3 3.3 8.2

Base Spacers provide a 3 separation between bottom row of ducts & trench floor, except for 4x1, which is 1 3/4.

37

Bending Equipment for PVC ConduitEZ BENDInduction* Bender

EZ-2X Conduit 1/2 thru 2PART NO. 5133580 PKG. WT. 30 1610 Watts, 115 VAC Dimensions: 27"(L) x 6" (W) x 8" (H)

* U.S. Patent Number: D347,231

EZ BEND

Infrared BendersEZ-2 Conduit 1/2 thru 2PART NO. 5133683 PKG. WT. 19 1700 Watts, 115 VAC Dimensions: 27"(L) x 6" (W) x 7" (H)

EZ-4P Conduit 1/2 thru 4PART NO. 5133581 PKG. WT. 60 With "Powerdrive" and ARS-46 Adjustable Roller Stand. "Powerdrive" is motorized rotation of the PVC pipe. 2800 Watts, 120 VAC Dimensions: 56"(L) x 8" (W) x 13" (H)

EZ-4 Conduit 1/2 thru 4PART NO. 5133582 PKG. WT. 50 Without Powerdrive 2800 Watts, 120 VAC Dimensions: 56"(L) x 8" (W) x 13" (H)

38

" EZ BEND is a registered trademark of Bradshaw Mfg., Inc. All Rights Reserved and is used with permission."

Bending Equipment for PVC ConduitEZ BENDInfrared BenderPART NO. 5133684 PKG. WT. 92 PRICE EACH 2,212.82

EZ-6P Conduit 1/2 thru 6 with PowerdriveIncludes ARS-46 Adjustable Roller Stand. (ARS-46 is not pictured.) "Powerdrive" is motorized rotation of the PVC pipe. 6350 Watts, 230 VAC Dimensions: 73"(L) x 11" (W) x 16" (H)

PART NO. 5133689

PKG. WT. 80

PRICE EACH 1,764.08

EZ-6 Conduit 1/2 thru 66300 Watts, 230 VAC Dimensions: 73"(L) x 11" (W) x 16" (H)

EZ BEND Bending PlugsPK-24 Small diameter kit 2 thru 4 Includes 3 pairs of plugs and sleeves. Comes in an organized carrying case. Kit dimensions: 8 x 9 1/2 x 17 PART NO. 5133687 PKG. WT. 6

PK-46 Large diameter kit 4 thru 6 Includes 3 pairs of plugs and sleeves. Comes in an organized carrying case. Kit dimensions: 9 1/2 x 10 1/2 x 18

PART NO. 5133686

PKG. WT. 9

PK-26 All diameter kit 2 thru 6 Includes 5 pairs of plugs and sleeves. Comes in an organized carrying case. Kit dimensions: 9 1/2 x 10 1/2 x 18

PART NO. 5133685

PKG. WT. 10

" EZ BEND is a registered trademark of Bradshaw Mfg., Inc. All Rights Reserved and is used with permission."

39

EZ FLEX Electrical Nonmetallic TubingMeets specifications: NEMA TC-13 and NEC Article 331. Suitable for use with 90C conductors. CANTEX EZ-FLEX ENT is a high performance lower cost alternative to electrical metallic tubing. Non-conductive and corrosion resistant. EZ-FLEX not only costs less than metal tubing but installation time is dramatically reduced, saving expensive labor cost. Corrugated design allows bending by hand, eliminating the necessity of bending equipment and special tools. Reduced inner surface area cuts down on drag so that wire pulling is accomplished easier and faster. U.L. Listed EZ-FLEX is used in circuits of 600 volts or less. Minimum installation temperature is -4F (-20C) and maximum ambient temperature is 122F (50C). EZ-FLEX is made in electric blue color for easy identification.

Straight Length-10

PART NO.A51AE11 A51AG11 A51BA11

SIZE1/2 3/4 1

PIECES PER PACK360 400 240

FEET PER PACK3600 4000 2400

UPC-ITF 3 00 PKG8870051001 3 51021 1 12008 3

PACK WT.432 560 408

Coils

PART NO.A51AEB1 A51AGA1 A51BAA1

SIZE1/2 3/4 1

FEET PER COIL200 200 100

FEET PER PKG400 200 100

UPC-ITF 3 00 PKG8870002024 6 02026 0 01616 4

PKG WT.48 28 17

ReelsPART NO.A51AEQ1 A51AEK1 A51AGJ1 A51BAJ1 1

SIZE

FEET PER REEL1500 5000 1000 1000

UPC-ITF 3 00 PKG8870051019 8 04226 2 51038 9 01625 6

PKG WT.(Weight of reel not included)

1/2 1/2 3/4

180 600 140 170

Note: U.L. Listed longer lengths are available on request. 1/2 5000 and 3/4 3000

40

REELS OF RED AND YELLOW EZ FLEX ARE AVAILABLE

EZ FLEX Electrical Nonmetallic AccessoriesCouplingsPART NO.5163380 5163381 5163382 1

SIZE1/2 3/4

STD. PKG.200 200 100

UPC-ITF 3 00 8870056716 1 56717 8 07110 1

PKG. WT.9.20 16.40 14.40

Terminal Adapters Threaded

PART NO.5163415 5163416 5163417

SIZE1/2 3/4 1

STD. PKG.200 200 100

UPC-ITF 3 00 8870001209 8 01210 4 01211 1

PKG. WT.0.40 0.40 0.40

Terminal Adapters Snap In

PART NO.5163405 5163406 5163407

SIZE1/2 3/4 1

STD. PKG.200 200 100

UPC-ITF 3 00 8870056718 5 56719 2 07210 8

PKG. WT.0.40 0.40 0.40

Electrical Nonmetallic Slab BoxENT Slab Box with KnockoutsPART NO. ENS0507K ENS0500K KNOCKOUTS 4 x 1/2 / 4 x 3/4 8 x 1/2 STD. PKG. 25 25 UPC-ITF 3 0088700 04173 9 04129 6 PKG. WT. 16.25 16.25

ENT Slab Box with Connectors

PART NO. ENS0507C ENS0500C

KNOCKOUTS 4 x 1/2 / 4 x 3/4 8 x 1/2

STD. PKG. 25 25

UPC-ITF 3 0088700 04130 2 04131 9

PKG WT. 16.25 16.25

ENT Stubby

PART NO. EN050SBY EN075SBY EN100SBY

STD. SIZE 1/2 3/4 1

UPC-ITF PKG. 150 150 200

PKG. 3 00 88700 04407 5 04408 2 04409 9

WT. 6.00 6.00 12.00

41

ENT Nonmetallic Electrical BoxesGray box with 3 Knockouts for 1/2 and 3/4 ENT 4 x 2 1/4 x 3 1/16 STD. PKG. 50 UPC-ITF 3 0088700 02541 8 PKG. WT. 6.28

ENT Single Gang 18 Cubic InchPART NO. EN18SB

ENT Two Gang 22.5 Cubic InchPART NO. EN22DB STD. PKG. 50

Gray box with 8 Knockouts for 1/2 ENT 4 square - 1 1/2 deep UPC-ITF 3 0088700 02543 2 PKG. WT. 6.28

ENT Two Gang Box 31.0 Cubic InchPART NO. EN31DB STD. PKG. 50

Gray box with 8 Knockouts for 1/2 and 3/4 ENT 4 square - 2 1/8 deep UPC-ITF 3 0088700 02542 5 PKG. WT. 14.15

ENT Ceiling Box 20.3 Cubic InchPART NO. EN20CB STD. PKG. 50

Black box with 8 Knockouts for 1/2 and 3/4 ENT 4 Diameter 2 1/16 Depth UPC-ITF 3 0088700 02546 3 PKG. WT. 8.35

NOTE: Not suitable for ceiling fan installation. Black box with 6 Knockouts for 1/2 and 3/4 ENT 4 Diameter 2 1/16 Depth Bar adjust 14 1/4 to 22 1/2 in length PKG. WT. 19.83

ENT Ceiling Box w/Bar Hanger 20.3 Cubic Inch

PART NO. EN20CH

STD. PKG. 25

UPC-ITF 3 0088700 02545 6

42

Enviro-Flex Liquidtight ConduitLiquidtight Non-metallic Flexible Conduit. Conforms to NEC Article 351 and UL 1660. Enviro-Flex gives complete environmental protection for exposed cable installations and is ideal for use with control and motor applications, machinery tools, moving machinery, console wire, transformer connections, outdoor lighting, air conditioning, heating systems and computer power distribution. Enviro-Flex offers advantages compared to metal conduit: INSTALLATION Enviro-Flex costs less to install. It is easy to cut with no jagged edges, is less than 1/2 the weight of metal and can utilize all existing liquidtight fittings. FLEXIBILITY Enviro-Flex is more flexible and its smooth inner bore makes pulling wires easier than ever. SERVICE ENVIRONMENT Enviro-Flex is waterproof, acid, oil, alkaline, and corrosion resistant. It is non-conductive, self-extinguishing, extremely resistant to crush, abrasion, and strain. UL listed for constant use at maximum 60C (140F) and for sunlight resistance.

Coils

PART NO. V06ADA1 V06AEA1 V06AGA1 V06BAA1 V06BCN1 V06BEN1 V06CAN1

SIZE 3/8 1/2 3/4 1 1 1/4 1-1/2 2 SIZE 1/2 3/4 1

FEET PER COIL 100 100 100 100 50 50 50 FEET PER COIL 1000 700 400 FEET PER COIL 100 100 50 25 25 10 10 FEET PER COIL 50 50 50 25 25 10 10 FEET PER COIL 370 370 154

UPC-ITF 3 00 88700 15004 2 56805 2 56806 9 54746 0 54749 1 54750 7 54751 4 UPC-ITF 3 00 88700 54743 9 54745 3 54747 7 UPC-ITF 3 00 88700 08545 0 56722 2 56723 9 53989 2 01077 3 01078 0 01079 7 UPC-ITF 3 00 88700 08425 5 56720 8 56721 5 53915 1 01072 8 01073 5 01074 2 UPC-ITF 3 00 88700 95381 0 95382 6 95385 8

WEIGHT PER COIL 12.80 13.60 16.50 25.9 16.75 22.30 30.85 WEIGHT PER REEL 136.00 115.50 99.60 WEIGHT PER COIL 6.70 6.40 4.14 3.15 7.11 3.11 5.10 WEIGHT PER COIL 4.10 4.90 6.12 5.10 10.13 5.14 8.40 WEIGHT PER COIL 97.68 153.18 111.03

Reels

PART NO. V06AEJ1 V06AGM1 V06BAD1

Straight Connectors

PART NO. 6441000 6441001 6441002 6441003 6441004 6441005 6441006

SIZE 3/8 1/2 3/4 1 1 1/4 1-1/2 2

90 Angle Connectors

PART NO. 5441000 5441001 5441002 5441003 5441004 5441005 5441006

SIZE 3/8 1/2 3/4 1 1 1/4 1-1/2 2 SIZE 1/2 3/4 1

Flexible Elbows

PART NO. 6441101 6441102 6441103

43

Solvent Cement for Conduit and FittingsConduit Cement No. 99PART NO. SIZE STD. PKG. UPC-ITF 3 00 88700 PKG. WT.

7210601 7210602 7210603 7210605

1/2 Pint Pint Quart GallonSIZE

24 12 12 6STD. PKG.

01019 3 00051 4 01018 6 56954 7UPC-ITF 3 00 88700

14.28 13.12 25.32 49.24PKG. WT.

Conduit Cement No. 99 Low VOC

PART NO.

7210611 7210612 7210613 7210615

1/2 Pint Pint Quart GallonSIZE

24 12 12 6STD. PKG.

01212 8 01213 5 01214 2 01215 9UPC-ITF 3 00 88700

14.28 13.12 25.32 49.24PKG. WT.

Conduit Cement Gray

PART NO.

7210502 7210503

Pint Quart

12 12

01226 5 01227 1

14.28 13.12

Conduit Cement All Weather Fast-Dry

PART NO.

SIZE

STD. PKG.

UPC-ITF 3 00 88700

PKG. WT.

7210411 7210412 7210413

1/2 Pint Pint Quart

24 12 12

01580 8 01581 5 01582 2

13.90 12.74 24.58

Primer No. 10

PART NO.

SIZE

STD. PKG.

UPC-ITF 3 00 88700

PKG. WT.

7211301 7211302 7211303 7211305

1/2 Pint Pint Quart Gallon

24 12 12 6

54712 5 54713 2 54714 9 54715 6

13.90 12.74 24.58 47.76

ESTIMATED SOLVENT REQUIREMENT PER 1,000 FEET: IN QUARTS One Weld per 20 Feet Pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 Cement 1/2 1/2 1/2 1 1 1 1 1/2 Primer 1/2 1/2 1/2 1 1 1 1 1/2

3 1 1/2 1 1/2

4 2 2

5 2 1/2 2 1/2

6 4 4

Solvent Cement for EZ-FLEX ENTENT No. 50 CEMENTPART NO. SIZE STD. PKG. UPC-ITF 3 00 88700 PKG. WT.

7210402 7210403 44

Pint Quart

12 12

01020 9 01021 6

13.12 13.12

Limited WarrantyThe Seller, CANTEX Inc., warrants its PVC plastic pipe, conduit, fittings, accessories, residential electrical boxes and solvents against defective workmanship and material for a period of one year from date of applicable invoice. Sellers liability hereunder, either for breach of warranty or for negligence, is expressly limited, at Sellers option, to: A) Replacement at the agreed point of delivery, at no cost to the Purchaser, of any product found by the Seller to be defective or found not to conform to the applicable industry manufacturing standards, or B) to refund or credit to the Purchaser of the purchase price of such products, provided that Seller is notified immediately upon the discovery of any claimed defect and that representative samples of the allegedly defective product are returned, transportation prepaid, to Seller, F.O.B. shipping point, at Sellers request. No claim under this Limited Warranty will be considered until the product and representative samplings thereof have been examined by Seller. The above warranty constitutes the entire liability of the Seller. Seller shall not be liable for any incidental or consequential damages directly or indirectly arising or resulting from the sale, transportation, handling, installation or use of the products sold, nor for product losses, reinstallation or labor costs.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION OR LIABILITY ON THE PART OF THE SELLER.

Situations that void this Limited Warranty:1. 2. Excessive temperature combination during test of operation. Use of the product under conditions for which the product was not designed.

3. Failure to adhere to Sellers General Instruction Sheets concerning the proper handling, installation and testing of the product. General Instruction Sheets are available on request; Call 817-215-7000. 4. Use of non-suitable solvent cement. Suitable solvent cement shall be cement made in accordance with ASTM D 2564 and of the proper grade (viscosity) for the size of pipe being joined. CANTEX solvent cements meet these requirements.941-967-4161 101 Gandy Road Auburndale, Florida 33823 702-747-5010 130 Woodland Ave. Reno, Nevada 89533 940-325-3344 2101 NE 1st St Mineral Wells, Texas 76067 330-995-3665 11444 Chamberlin Rd. #1 Aurora, Ohio 44202 573-341-3000 2021 Industrial Park Blvd. Rolla, Missouri 65401 928-681-3301 4045 Bonanza Drive Kingman, Arizona 86401

817-215-7000 301 Commerce Ste. 2700 Fort Worth, Texas 76102

Authorized Distributor Policy1. BUYERS ACCEPTANCE No waiver, alteration, or modification of these conditions will be binding unless in writing signed by an authorized employee of CANTEX INC. PAYMENT TERMS All prices are F.O.B. shipping point with freight costs being collect, prepaid or allowed and do not include local, state or Federal taxes. Taxes are for the account of Buyer. Payment terms appear on the face of Buyers invoice. All orders are subject to credit approval. DELINQUENCY FEES If any invoice or part thereof is not paid within 30 days of date of invoice, CANTEX will impose as Delinquency Fees a charge of one (1%) percent per month or the maximum applicable legal amount upon any overdue amount to offset CANTEXs anticipated damages including collection and accounting costs. Buyer agrees that the law of the State of Buyers location will govern the construction and validity of this Contract and all other legal aspects of this sale. CANCELLATION Buyer may cancel prior to shipment subject to Delinquency Fees of the cost of labor, overhead and materials used plus ten (10%) percent of the sales price. Special orders may not be cancelled. RETURNS No material may be returned for credit without the Sellers written consent.

6.

2.

3.

7.

8.

4.

9.

5.

SHIPMENT/DELIVERY CANTEX will ship common carrier or CANTEX truck. Buyer must file Claims for errors or breakage of product delivered by CANTEX trucks in writing to CANTEX within five (5) days of delivery. Errors or breakage of product delivered by common carrier are Buyers responsibility. Buyer is responsible for prompt unloading of trucks and/or freight cars. If delivery of Products is delayed by Buyer more than 60 days, Buyer will pay CANTEX eighty (80%) percent of total cost of Products. INSTALLATION Supervision of installation not included unless specifically requested. DELAY CANTEX will not be responsible for any delay in performance due to acts of God, war, riots, embargoes, acts of civil or military authorities, fires, floods, accidents, quarantine restrictions, supplier conditions, strikes, differences with workmen, cessation of plant operations, delays in transportation, nuclear incident, shortage of cars, fuel, labor or materials, or any cause beyond the reasonable control of CANTEX. COMPLIANCE CANTEX states its intentions to comply with all Federal laws applicable to CANTEXs performance.

Terms and Conditions of Sale1. Pricing: Distributor pricing is in accordance with current company pricing policy. All pricing/delivery is contingent upon strikes, accidents, acts of God or other causes beyond our control. 2. Price Change: CANTEX will endeavor to give distributors advance notice of price change but reserves the right to make changes with or without written notice. 3. Additions, Changes and Cancellations: Addition of items or a change in quantities already accepted will be at the discretion of CANTEX. Cancellation of any order after acceptance by CANTEX may result in a penalty charge, the amount of which will be determined by the status of that order at the time of cancellation. 4. Minimum Charges: Minimum invoice value is $100 net. Orders received below the minimum net value will be processed and billed the minimum charge of $100 net. 5. Termination: CANTEX may terminate an authorized distributor for good cause effective immediately upon written notice addressed to the authorized distributors last known address. In the event of termination with or without pause, CANTEX shall honor all purchase orders given in good faith by the distributor prior to termination, provided CANTEX receives reasonable assurances of payment for such orders. After termination, a person or firm shall cease to advertise or represent that it is an authorized distributor of CANTEX. 6. CANTEX Terms: Terms are 2% 10th prox, net 30. Freight allowed on single destination shipments of $10,000 conduit only or combined conduit and accessories or $1,000 net value for accessories and switch/ outlet boxes or covers only. Shipments of less than the prepaid value are to be prepaid and the freight cost is added to the invoice. 7. Stock orders will be in standard package quantities. 8. CANTEX reserves the right to apply to the selling price any tax imposed by Law on the sale of the product.

46

Authorized Distributor PolicyReturned Goods Policy1. Stock Inventory: A. Permission for such return of goods must first be obtained from CANTEX in writing. Such request must show CANTEX invoice number, date, quantity of items and CANTEX part number. B. Material to be returned must be new, unused, properly packaged and in resaleable condition. No credit will be issued for open or partially used packages. C.Request for return must be processed within 6 months from the date of purchase. D. The RGA will expire six (6) months from date of issue. If the material is received after that date, terms of the return must be renegotiated. E. Material must be received at the location indicated on the RGA or it will become null and void. F. Restocking charge is 25%. G. The distributor will prepay freight cost to return the product and the outbound freight will be deducted from the credit issued.

Our PhilosophyIt is the intent of CANTEX Inc. to sell our PVC electrical conduit, accessory products and switch and outlet boxes primarily through distributors. We believe the distributors play a necessary and vital role in our company and that it is to our mutual advantage that CANTEX offers to its authorized distributors the most complete program possible. CANTEX objective is to select and establish recognized electrical distributors to thoroughly cover each geographical area and each market segment that CANTEX serves.

Our goal is to be a significant and increasing profit contributor to each of our authorized CANTEX distributors.

In GeneralWith the philosophy stated, CANTEX carries out the following steps to insure the competitiveness and full profitability of each of our authorized distributors. 1. 2. 3. CANTEX is constantly adding to its line of Electrical Conduit and accessories. Our products are manufactured to the highest quality standards and meet or exceed all applicable standards. CANTEX offers the following benefits to its distributors: A. The best delivery in the industry. B. Referred business. C. Assortment privileges in total product line for quantity discount. D. Fair pricing. E. We will drop-ship prepaid orders at no extra charge. CANTEX aids the sales efforts of our authorized distributors in the following manner: A. Sales leads derived from national advertising and trade shows. B. Conducting sales meetings for our distributors. C. Have an in-place factory direct sales/service staff to assist you in your sales effort. D. Literature and samples for promotional purposes. We expect an authorized CANTEX distributor to: A. Maintain CANTEX products in inventory. B. Use best efforts and due diligence in the promotion and sale of CANTEX products. C. Maintain their account on a current basis. CANTEX reserves the right to quote special drop-ship requirements only through those distributors who maintain an acceptable inventory of CANTEX products.

4.

5.

6.

301 Commerce Ste. 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-2157001 www.cantexinc.com

Documents

CANTEX Fitting Brochure 200809