4
CANTER 413 4X2 / CITY CAB / MANUAL OR DUONIC DCT OUR SAFEST CANTER EVER WITH AEBS, LDWS AND ESP STANDARD CLASS LEADING TARE WEIGHT AND 30,000KM SERVICE INTERVALS GVM GCM Power/Torque 3,510KG 7,000KG 96KW / 300NM Can be driven on a passenger car licence

CANTER 413 - Fuso Australia 413 City...CANTER 413 4X2 / CITY CAB / MANUAL OR DUONIC DCT OUR SAFEST CANTER EVER WITH AEBS, LDWS AND ESP STANDARD CLASS LEADING TARE WEIGHT AND 30,000KM

  • Upload
    others

  • View
    8

  • Download
    1

Embed Size (px)

Citation preview

  • CANTER 4134X2 / CITY CAB / MANUAL OR DUONIC DCT

    OUR SAFEST CANTER EVER WITH AEBS, LDWS AND ESP STANDARDCLASS LEADING TARE WEIGHT AND 30,000KM SERVICE INTERVALS

    GVM GCM Power/Torque

    3,510KG 7,000KG 96KW / 300NM Can be driven on a passenger car licence

  • A 4x2 413 City Cab SWB 6 Sp. Duonic AMT (FEA21CR1SFBB) 2800mm 3,510kg 7,000kgB 4x2 413 City Cab SWB 5 Sp. Manual (FEA21CR2SFBB) 2800mm 3,510kg 7,000kg

    Engine Version FUSO 4P10-T2 DieselConfiguration 4 Cyl. In-line DOHC, 4-ValveType Variable Geometry Turbo Charged

    Air to Air IntercooledDisplacement 3 litre (2998cc)Bore 95.8mmStroke 104mmPower (DIN) 96kW @ 3050~3500 rpmTorque (DIN) 300Nm @ 1300~3050 rpmMaximum Engine Speed 4100 rpmCompression Ratio 17.5:1Cooling System / Oil Cooler Water cooled,13.0L capacity/ Plate type engine oil

    coolerAir Cleaner Paper Element Type with Restrictor Indicator. Vertical

    Intake Mounted on Clean Air Side (RH)Emission Control Diesel Particulate Filter (DPF) Exhaust

    Dash Display DPF Status 0~9 (Empty~Full)Parked Regeneration possible from 7~9

    Emission Level ADR 80/03 & EEV rated Enhanced Environmentally-Friendly VehicleEuro 5

    Injection System Bosch Common Rail Direct InjectionBosch Piezo Technology Injectors

    Tank Type Rectangular Steel Tank with Locking CapFuel Capacity * 100 LitresFiltration Filter with Water Separator and Indicator SensorNotes *Max Fill to approx 95% of Air Capacity

    Fan Drive Thermo modulated continuous control (Viscous)Radiator Corrugated Fin with Expansion Tank

    Voltage 12V Negative EarthAlternator Capacity 12V-110 ampStarter Capacity 12V-2.0kWBattery Capacity 2x12V, 70Ah/5hrBattery Specification 115D31L x2Headlamp Type HalogenHeadlamp Capacity 2x55W/60W

    Clutch Model AFully Automated DualClutch (no clutch pedal)

    BFUSO C3W28

    Type ADual Clutch (Wet Multi-plate)

    BSingle Dry Plate, DirectHydraulic Type

    Version AFUSO Duonic M038S6

    BFUSO M038S5

    Type/Speeds A6 Speed Dual Clutchwith Auto and ManualModes

    B5 Speed with In-DashGearshift Lever

    Features AVirtually Instant GearChangesIn-Dash Gear Leverwith Park BrakePositionECO Mode to MinimiseFuel Usage

    BSynchromesh 2nd-5th

    Ratios A1st: 5.3972nd: 3.7883rd: 2.3104th: 1.4745th: 1.0006th: 0.701Rev. 5.397

    B1st: 5.4942nd: 3.1933rd: 1.6894th: 1.0005th: 0.723Rev. 4.494

    PTO Opening LH Side

    Axle Version FUSO F200TType Independent Front SuspensionCapacity * 2300kgNotes *See MAX LOADING for vehicle capacity.

    Type Double Wishbone Independent Front Suspension withCoil Springs and Shock Absorbers

    Type Full Floating Banjo TypeAxle Version FUSO R030TCapacity* 3800kgRatio 4.444:1Notes *See MAX LOADING for vehicle capacity.

    Type Steel SuspensionDetails Parabolic Leaf with Shock AbsorbersSize Main Leaves 1100x70mm

    Front 2180kgRear 3800kgTotal 3510kg

    Type Rack & PinionSteering Column Tilt/Telescopic AdjustablePower Assist Standard

  • A 4x2 413 City Cab SWB 6 Sp. Duonic AMT (FEA21CR1SFBB) 2800mm 3,510kg 7,000kgB 4x2 413 City Cab SWB 5 Sp. Manual (FEA21CR2SFBB) 2800mm 3,510kg 7,000kg

    Type Hydraulic Dual Circuit with Front and Rear DiscsSingle Calliper Front and Rear

    Size Front 219x28mmSize Rear 219x28mmFeatures ABS plus EBD (Electronic Brake Distribution)

    Active Emergency Braking System (AEBS)Electronic Stability Program (ESP)Exhaust BrakeBrake Priority SystemElectronic Brake Wear Sensors (From Aug 20 build)

    Park Brake Transmission Mounted

    Wheel Type 7 x Single Piece Disc Rims (Including Spare)Wheel Size 16.0x5.5K-115Wheel Stud Pattern 5 Stud 208 PCDTyre Size All 185/85R16 111/109Spare Tyre Carrier Provided

    Type Reinforced Tapered ChannelSize 188x60x4mmWidth 699mmTensile Strength 440 MPa

    Gauges Speedometer with OdometerTachometerFuel LevelWater Temperature

    Colour Information Display Fuel ConsumptionDPF Bar Chart from 1~9Water TemperatureLane Departure WarningMaintenance Reminder SystemTripmeters

    Satellite Navigation Maps with heavy vehicle weight, length, height &hazardous material selectable restrictions with 3 yearsof Map updates

    Colour Display 7 inch LCD with touch screen controlPhone Connectivity Bluetooth® hands freeAudio Visual Entertainment Bluetooth® music streaming compatible Digital radio

    DAB+ (also AM/FM for areas not covered by DAB+)USB & 3.5mm/AUX port

    Reversing CameraCompatible

    Display can accept up to 5 cameras#

    Optional Accessories(available at additional cost)

    Rear Mounted Parking Sensor Kit High or LowTyre Pressure Monitoring System

    Notes # Cameras available through spare parts

    Airbag(s) Dual Air Bags and Seat Belt Pre-Tensioners (Driver &Far Side Passenger)

    Active Safety Features ABS plus Electronic Brake force Distribution (EBD)Advanced Emergency Braking (AEBS)Anti-Slip Regulator (ASR)Electronic Stability Program (ESP)Lane Departure Warning System (LDWS)

    Cruise Control AYes

    BNo

    Hill Start System YesCab Cooling & Heating Air Conditioner / Heater / DemisterAccessory Power 12V Accessory Power Outlet / Cigar LighterDriving Fuso Multimedia Unit

    Keyless Central LockingElectric WindowsCup Holders (2)

    Storage Dual Overhead Storage PocketsIn-Dash Centre Document StorageDoor Storage PocketsDash Storage Tray (1 DIN)Coat Hooks

    Cab: External Door Side Impact BeamsChassis Reverse Warning Buzzer

    Factory Reverse Camera with Infrared Display andAudible Pickup (Supply only in Cabin with CabChassis)

    Type All Steel Forward Control Manual TiltMounting Hydroelastic 4 PointAdditional Engine Access N/AColour Natural WhiteWindscreen Wipers 2 Speed + Intermittent Cycle with Integrated Washer

    NozzlesRear Vision Mirrors 1 x Internal

    2 x External Convex (ECE 46) - HeatedSeating Capacity 3Seat Belts Lap Sash Belts for Outside Seating Positions

    Lap Belt for Centre SeatDriver Seat Belt Warning (From Aug 20 build)

    Seat (driver) Fixed RecliningLH Arm Rest & Lumbar Support

    Seats (passenger) Flat Folding, 2 Passenger Bench

    Interval* 30,000km or 12 Months (whichever occurs first)Notes * based on normal operating conditions and may be

    reduced when operating under severe conditions.

    Basic/Powertrain 5 Years or 200,000kms (whichever occurs first)Cab Perforation/AntiCorrosion

    5 Years

    Turning Circle (kerb to kerb- metres)

    9.8

    Road Speed (km/h) at MaxEngine Speed

    140

    Engine Speed (rpm) at100km/hr (top gear)

    A2346

    B2420

    Gradeability at Rated GVM(theoretical)*

    60%

    Notes *This is theoretical performance only. Actualperformance may vary under different conditions

  • A 4x2 413 City Cab SWB 6 Sp. Duonic AMT (FEA21CR1SFBB) 2800mm 3,510kg 7,000kgB 4x2 413 City Cab SWB 5 Sp. Manual (FEA21CR2SFBB) 2800mm 3,510kg 7,000kg

    Front* A1365kg

    B1345kg

    Rear* A535kg

    B540kg

    Total* A1900kg

    B1885kg

    Notes * Mass (est.) includes oil and water but excludes sparewheel, tools & fuel. Weights provided are subject to3.5% variation (+/-)

    WFF (Width Front Fender)(mm)

    1695

    WRA (Width Rear Axle)(mm)

    1869

    WRT (Width Rear Track)(mm)

    1435

    Width Frame (mm) 699A - Length Overall (mm) 4985C - Front Overhang (mm) 990D - Wheelbase (mm) 2800G - Front Axle to Rear ofCab (mm)

    525

    H - Rear of Cab to RearmostItem Behind Cab (mm)

    A50

    B81

    I - Rearmost Item BehindCab to Rear Axle (mm)

    A2225

    B2194

    J - Frame, Rear Axle to End(mm)

    1195

    P - Height Cab to Ground(mm)

    2110

    Q - Height Cab to Frame(mm)

    1471

    R - Height Rear Frame toGround (mm)

    728

    Notes Chassis reinforcement must be utilised forTipper/Demountable type body configurations.To conform with ADR 13/00 and 14/02 (lighting/mirrorrequirements) the following must be adhered to atbody installation.- If overall width exceeds 2.1 metres and other thanflat type or tipper body is fitted, rear end-outlinemarkers must be installed.- If overall length exceeds 6.0 metres, side reflectorsmust be installed.- If overall length exceeds 7.5 metres and widthexceeds 2.1 metres, side marker lamps must beinstalled.- If overall width is less than 1.9 metres, the mirrorsmust be modified to project not more than 230mm.To conform with ADR 42/04 (General Safety), rearwheel guards must be fitted to the vehicle.

    Unless specified in writing herein the accessories, applications, bodies orequipment depicted in this are for illustration purposes only and may not beavailable from Daimler Truck and Bus Australia Pacific Pty Ltd. ABN 86 618 413 282DTB. No representation or warranty whatsoever is given in relation to anyaccessories, applications, bodies or equipment or suitability of same that are shownherein that may be manufactured, supplied or fitted by a party other than DTB. DTBreserves the right without notice or obligation to discontinue or make changes tothe colour, designs, materials and specifications of the products and optionsreferred to herein at any time. For the most current information and in order toascertain which accessories, applications, bodies and equipment are available fromDTB please contact your authorised FUSO Truck and Bus dealer. Fuso is aregistered trademark of Daimler Truck and Bus Australia Pacific Pty Ltd. CopyrightDTB. Reproduction in whole or part prohibited without written approval. PartNumber TSC100E-SSV1. Valid from 17-May-21.