5
Canon PowerShot SX230 HS LCD Screen Replacement This guide will show you how to replace the camera's LCD screen effectively. Written By: KeShayla Thomas Canon PowerShot SX230 HS LCD Screen Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Canon PowerShot SX230 HS LCD Screen Replacementthe-eye.eu/public/Books/iFixIt Guides/Canon PowerShot...Canon PowerShot SX230 HS LCD Screen Replacement This guide will show you how

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

  • Canon PowerShot SX230 HS LCD ScreenReplacement

    This guide will show you how to replace the camera's LCD screen effectively.

    Written By: KeShayla Thomas

    Canon PowerShot SX230 HS LCD Screen Replacement

    © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

  • INTRODUCTION

    Having trouble with your LCD screen? Use this guide to replace the camera's screen. No backgroundinformation is necessary.

    TOOLS:Phillips #000 Screwdriver (1)

    Canon PowerShot SX230 HS LCD Screen Replacement

    © iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

    http://www.ifixit.com/Tools/Phillips-000-Screwdriver/IF145-030-3

  • Step 1 — LCD Screen

    Remove the two 2.5 mm screws located on the right side of the camera using the Phillips #000Screwdriver

    Unscrew the two 2.5 mm screws located on the side of the camera. Then, remove the two black2.5 mm screw located on the bottom of the camera.

    Step 2

    Pull off the back casing and carefullypull the ribbon cable that connectsthe mode dial and the motherboardusing your fingers.

    Canon PowerShot SX230 HS LCD Screen Replacement

    © iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

  • Step 3

    On the inside of the camera, there will is a pink and silver screw. Unscrew the silver 2.5 mm screwonly.

    Remove the screw located right above the LCD screen.

    Step 4

    Using your fingers, carefully removethe ribbon cable located at the topright of the camera. Then pull off thecamera's front casing.

    Make sure the battery/SD Cardpanel is open.

    Canon PowerShot SX230 HS LCD Screen Replacement

    © iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

  • To reassemble your device, follow these instructions in reverse order.

    This document was last generated on 2017-06-19 05:43:05 PM.

    Step 5

    Remove the two 2.5 mm screws that secures the camera buttons to the camera located on theright side of the camera. Then, remove the screw located on the side of the screen. Now, locatethe screw under the LCD screen and remove it.

    Canon PowerShot SX230 HS LCD Screen Replacement

    © iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5

    Canon PowerShot SX230 HS LCD Screen ReplacementWritten By: KeShayla ThomasINTRODUCTION

    TOOLS:Step 1 — LCD ScreenStep 2Step 3Step 4Step 5