8/11/2019 Canon MP258 Error Code and How to Fix It

http://slidepdf.com/reader/full/canon-mp258-error-code-and-how-to-fix-it 1/2

Canon MP258 Error Code and how to fix it

Here I get a link on the Canon MP258 error code explanation. Please read and hopefully useful ....

Canon MP258 Error code and fix: MP258 Error code there are 2 types of codes, namely:1. that uses the letters before P, for example P072. that uses the letters before E, eg E05

P Canon MP258 Error code: 

P02 (Carriage error) Solution:1. Make sure no foreign object stuck in the roll printer.2. Clean and check the encoder, may be exposed to splashes of ink.

P03 (Line feed error) Cause: Timing Disk dirty / damaged.Solution:1. Check the timing disk sensor located to the left of the printer2. Check and clean the board.

P05 (ASF sensor error) Cause: The paper detection sensor Canon MP258 Error.Solution:Try changing one of the following parts:• ASF / PE sensor unit. • Motor. • Board Printer Canon MP258. 

P06 (Internal temperature error): Cause: Excessive heat in the Canon MP258 printer.Solution:1. Clean the inside of the MP258 printer.2. replace Board MP258 Printer

P07 (Ink absorber full): Cause: Full Counter Ink, Printer Canon MP258 already saaenya on reset.Solution: Reset Printer Canon MP258 using software

P08 (Print head temperature rise error): Cause: Head too hot, exceeds the threshold, usually the color CatridgeSolution:Try changing the color catrid Canon MP258 printer.

8/11/2019 Canon MP258 Error Code and How to Fix It

http://slidepdf.com/reader/full/canon-mp258-error-code-and-how-to-fix-it 2/2

 P09 (EEPROM error) Cause: Canon MP258 experienced board EEPROM Corrupt or damaged.Solution:1. Board replace Canon MP258 printer.

P15 (USB VBUS over current) Cause: The printer excess current from the USB cable Canon MP258 printer.Solution:1. Try to Change Printer Canon MP258 USB cable.2. If still defective, replace the Board Printer Canon MP258.

P20 (Other hardware error) Cause: damage to other hardwareSolution:Board replace Canon MP258 printer.

P22 (Scanner error) Cause: The scanner is not workingSolution:

1. Replace Canon MP258 printer scanner.2. Board Replace Canon MP258 printer.

Canon MP258 Error code E: E04: Catridge Canon MP258 is not installed properly.Solution: Take the catridge and then put it again

E05: Catridge Canon MP258 is not installed properly or there is one damaged catridSolution:1. Take the cartridge, then plug it in again2. Replace the cartridge if there is a distinguished damaged

E14 and E15: Catridge Canon MP258 is not installed properly.

Solution: Take the catridge and then put it again

E13 and E16: Ink has run out / cartridge must be reset.Solution:Press the STOP / Reset for 5 - 15 seconds wait until the led display process.