Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Canon EXRT 600 Speedliteset up
Canon 600EX RT flash unitCanon remote
ST-E3-RT
Canon 600 RT
Radio based Wireless multiple flash system.
Canon Radio transmitter works up to 30 meters or 100 feet.
Transmits through walls, people and bright sun, and in 360 degrees radius.
Connect up to 15 flash in groups in ratios
A, B or A,B, C.
Zoom flash capability 20-200mm range focus assist
Color Correction filter holder with self recognition and correction
in AWB.
•SET UP
Custom Set up from LCD Display
• Place Transmitter or flash in hot shoe, turn on
• 1st Go to Menu1 • 2nd Choose External Speedlite Control • Press> Flash Function Setting• Press> Set up All settings from here
• Set it up there then register over to My Menu
• ID number #
Must be Uniqueand set to all units.
Once you set it you are set for good.
Setting will persist even if the batteries
are removed.
Channels: 1-15
In Radio you can set up to 15 flash units to flash
In Infrared you can set us as many as you like.
• Method of Connection or Wireless link
• Master and Slave.
• Radio transmit or Infrared/ line of site.
Master is Green and Slave is Amber
The Canon EXRT 600 Flash unites and the STE3 can be set to Radio or Infrared.
The Canon EX 580 Flashes and all earlier ETTL models can be triggered using either the EXRT 600 flash units or the STE3 Transmitter,however, earlier triggers such as the STE-2 can not fire the radio models.
Mode of operation5 modes
GR M, ETTL,Multi
5 zones
A B C D E
Press Group Menu buttonscroll down to get to additional
modes.
*Each zone can be set to any mode of operation or turned on
or off from the Master.
*You may use either the STE3 Transmitteror another Canon EXRT 600 as a master.
• High Speed Shutter Sync
Under LCD PANEL look for the 4 similar white buttons
1,2,3,4
Flip from menu/page 3 for infrared and menu 4 for Radio
must be in Connection method
Master.
PressSync to get to High Shutter sync.
Hi Speed Shutter Sync can be set and left in place.
The Flash power drops off significantly when higher shutter speeds are used.
The camera’s flash sync speed will not be effected.
Menu 4 in Master Mode or Menu 3 in Slave Mode
Press Memorythat will take you to
Save and Load
The first time you set it press,
Save
If you need to reset for any reasonPress Load
Once you set the master unit then you have to set the slave
In Gr mode,we set up the Master unit, you will notice on page 1 or menu 1 you will see Gr.
Press GR and it will light up.
Press the set button and the power slider will light up enabling you to use the dial for plus or minus in 1/3 increments.
Save to memory and assign to each slave.
• Power settings can all be set up and down in concert.
• Press menu1
• Press +/-
REL Remote Release Option
Menu 2
Use the Canon EXRT 600 as a transceiver to fire a camera remotely.
1.The master unit must be on the camera you wish to shoot with.
2. To trigger the camera, the firing flash should be set up and positioned off camera.3. Option, the master transceiver on the camera flash can be set to
not fire or use the STE3 Remote to receive the signal.
18 Custom Functions:
Set them once and rarely change
We are going to set 8
Set the rest to default.
• 00-Distance set to 1.
• 01- Auto Power off, keeps unit from turning itself off. Also set Camera so it does not go to sleep.
• 04-Set to 1. Flash exposure bracketing. Set to darker, medium and lighter.
07-Test firing Auto set to 1. If you never intend to use an external
battery then leave it at 0.
If you do then leave it set to 1 for a full power dump.
For big shoots you may want to confirm the battery is connected and indeed
doing it’s full job.
12-Set to 1.
Flash Recycle.If you never intend to use an external battery
or power source with your flash units then go with the
default setting.
If you use and external battery then set it to 1.
You will be separately distributing the power of recharging.
The each and every shot will be assigned to the external battery.
13- Set to 1.
Flash Exposure Compensation DialInstant access to the +/- over and under
exposure settingsfor one step controls.
• 20- Set to 1.
• Beep confirmation signal.
• 21- Default.
• The Light spread
• setting for use with modifiers.
• 22. set to 2.
• LCD Illumination Panel.
Canon Radio transmitter works up to 30 metersor 100 feet
through walls, people and bright sun.360 degrees.
This has allowed us to use a wide range of soft boxesand unusual modifiers to be used
in unusual locations.