Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
CANADA
Calgary, AB#3, 1820 - 30th Avenue NECalgary, Alberta T2E 7M5
Toll Free: 1-800-265-8665 (TOOL)Main: (403)243-1442Fax: (403)258-2614
Lloydminster, AB6415A - 63rd Street Close
Lloydminster, Alberta T9V 3B5Main: (780)875-1570Cell: (780)522-8294
USA
Victoria, TXP.O. Box 5363
2908 Coffey streetVictoria, Texas 77903Main: (361)575-7900Fax: (361)575-8081
Odessa, TX3400 Kermit Hwy
Odessa, Texas 79764Main: (432)337-7900Cell: (432)337-7901
Printed in Canada
Torque Anchors
Gas Separators / Intakes
The major component of the Artif icial Lift Tools product is our rangeof Torque Anchors. All of our Torque Anchors provide your with a
simple, economical and reliable solution to prevent tubingback off when PC pumping.
Depending on the conditions present, we can offer youwith our Dynamic Torque Anchor (DTA), Centralizing
Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.
Tubing Rotators
Our Tubing Rotators complement our TorqueAnchors in saving you from potential down
time and rig expense, as well as reducingmaintenance costs. The CTR Tubing Rotator
was designed to extend the life of yourtubing string by rotating the tubing.
This assures that the sucker rods do notwear against only one spot of the
tubing, which will cause prematuretubing failure. The E Style and
E-Plus Tubing Rotators offer thesame benef its of the CTR, but witha low prof ile design feature that
helps to keep the overallwellhead height to a minimum.
Evolution offers two unique DownholeGas Separators to signif icantly increase
pump eff iciencies and oil production.
PC Pump Gas Separator uses centrifugalforces to separate the gas from the produced
liquids before they enter the pump. Liquids arecarried through into the pump while the separated
gas is forced to f low up the annulus.
Beam Pump Gas Separator is designed to provide amethod of allowing gas to migrate up the annulus, thereby
preventing gas locking. The unique modular design makes itthe most f lexible Downhole Gas Separator available on the market.
We also offer a Bottom Feeder Weighted Eccentric Intake and aV-Backed Stainless Steel Pump Intake as well.
The major component of the Artif icial Lift Tools product is our rangeof Torque Anchors. All of our Torque Anchors provide your with a
simple, economical and reliable solution to prevent tubingback off when PC pumping.
Depending on the conditions present, we can offer youwith our Dynamic Torque Anchor (DTA), Centralizing
Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.
Tubing Rotators
Our Tubing Rotators complement our TorqueAnchors in saving you from potential down
time and rig expense, as well as reducingmaintenance costs. The CTR Tubing Rotator
was designed to extend the life of yourtubing string by rotating the tubing.
This assures that the sucker rods do notwear against only one spot of the
tubing, which will cause prematuretubing failure. The E Style and
E-Plus Tubing Rotators offer thesame benef its of the CTR, but witha low prof ile design feature that
helps to keep the overallwellhead height to a minimum.
Evolution offers two unique DownholeGas Separators to signif icantly increase
pump eff iciencies and oil production.
PC Pump Gas Separator uses centrifugalforces to separate the gas from the produced
liquids before they enter the pump. Liquids arecarried through into the pump while the separated
gas is forced to f low up the annulus.
Beam Pump Gas Separator is designed to provide amethod of allowing gas to migrate up the annulus, thereby
preventing gas locking. The unique modular design makes itthe most f lexible Downhole Gas Separator available on the market.
We also offer a Bottom Feeder Weighted Eccentric Intake and aV-Backed Stainless Steel Pump Intake as well.
The major component of the Artif icial Lift Tools product is our rangeof Torque Anchors. All of our Torque Anchors provide your with a
simple, economical and reliable solution to prevent tubingback off when PC pumping.
Depending on the conditions present, we can offer youwith our Dynamic Torque Anchor (DTA), Centralizing
Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.
Tubing Rotators
Our Tubing Rotators complement our TorqueAnchors in saving you from potential down
time and rig expense, as well as reducingmaintenance costs. The CTR Tubing Rotator
was designed to extend the life of yourtubing string by rotating the tubing.
This assures that the sucker rods do notwear against only one spot of the
tubing, which will cause prematuretubing failure. The E Style and
E-Plus Tubing Rotators offer thesame benef its of the CTR, but witha low prof ile design feature that
helps to keep the overallwellhead height to a minimum.
Evolution offers two unique DownholeGas Separators to signif icantly increase
pump eff iciencies and oil production.
PC Pump Gas Separator uses centrifugalforces to separate the gas from the produced
liquids before they enter the pump. Liquids arecarried through into the pump while the separated
gas is forced to f low up the annulus.
Beam Pump Gas Separator is designed to provide amethod of allowing gas to migrate up the annulus, thereby
preventing gas locking. The unique modular design makes itthe most f lexible Downhole Gas Separator available on the market.
We also offer a Bottom Feeder Weighted Eccentric Intake and aV-Backed Stainless Steel Pump Intake as well.
Evolution Oil Tools has a complete selection of Artificial Lift Tools and accessories
CTR Tubing Rotator
CDHS Tubing Swivel
SC-1 Anchor Catcher Beam Gas Separator PC Gas Separator Basic No Turn Tool Halbrite No Turn Tool Tubing Centralizer CRTA Rotating Anchor Dynamic Torque Anchor (DTA) Centralizing Torque Anchor (CTA)
E-PLUS Tubing Rotator
2-Way Tubing Swivel
Dynamic Torque Anchor with Extra By-Pass (DTA-XB)
Centralizing Torque Anchor with Extra By-Pass (CTA-XB)
V-Black SS Screen Pump Intake
Eccentric Intake
Burst Plug Tubing Drain Tubing Drain Valve
Torque Anchors
Gas Separators / Intakes
The major component of the Artif icial Lift Tools product is our rangeof Torque Anchors. All of our Torque Anchors provide your with a
simple, economical and reliable solution to prevent tubingback off when PC pumping.
Depending on the conditions present, we can offer youwith our Dynamic Torque Anchor (DTA), Centralizing
Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.
Tubing Rotators
Our Tubing Rotators complement our TorqueAnchors in saving you from potential down
time and rig expense, as well as reducingmaintenance costs. The CTR Tubing Rotator
was designed to extend the life of yourtubing string by rotating the tubing.
This assures that the sucker rods do notwear against only one spot of the
tubing, which will cause prematuretubing failure. The E Style and
E-Plus Tubing Rotators offer thesame benef its of the CTR, but witha low prof ile design feature that
helps to keep the overallwellhead height to a minimum.
Evolution offers two unique DownholeGas Separators to signif icantly increase
pump eff iciencies and oil production.
PC Pump Gas Separator uses centrifugalforces to separate the gas from the produced
liquids before they enter the pump. Liquids arecarried through into the pump while the separated
gas is forced to f low up the annulus.
Beam Pump Gas Separator is designed to provide amethod of allowing gas to migrate up the annulus, thereby
preventing gas locking. The unique modular design makes itthe most f lexible Downhole Gas Separator available on the market.
We also offer a Bottom Feeder Weighted Eccentric Intake and aV-Backed Stainless Steel Pump Intake as well.
The major component of the Artif icial Lift Tools product is our rangeof Torque Anchors. All of our Torque Anchors provide your with a
simple, economical and reliable solution to prevent tubingback off when PC pumping.
Depending on the conditions present, we can offer youwith our Dynamic Torque Anchor (DTA), Centralizing
Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.
Tubing Rotators
Our Tubing Rotators complement our TorqueAnchors in saving you from potential down
time and rig expense, as well as reducingmaintenance costs. The CTR Tubing Rotator
was designed to extend the life of yourtubing string by rotating the tubing.
This assures that the sucker rods do notwear against only one spot of the
tubing, which will cause prematuretubing failure. The E Style and
E-Plus Tubing Rotators offer thesame benef its of the CTR, but witha low prof ile design feature that
helps to keep the overallwellhead height to a minimum.
Evolution offers two unique DownholeGas Separators to signif icantly increase
pump eff iciencies and oil production.
PC Pump Gas Separator uses centrifugalforces to separate the gas from the produced
liquids before they enter the pump. Liquids arecarried through into the pump while the separated
gas is forced to f low up the annulus.
Beam Pump Gas Separator is designed to provide amethod of allowing gas to migrate up the annulus, thereby
preventing gas locking. The unique modular design makes itthe most f lexible Downhole Gas Separator available on the market.
We also offer a Bottom Feeder Weighted Eccentric Intake and aV-Backed Stainless Steel Pump Intake as well.
The major component of the Artif icial Lift Tools product is our rangeof Torque Anchors. All of our Torque Anchors provide your with a
simple, economical and reliable solution to prevent tubingback off when PC pumping.
Depending on the conditions present, we can offer youwith our Dynamic Torque Anchor (DTA), Centralizing
Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.
Tubing Rotators
Our Tubing Rotators complement our TorqueAnchors in saving you from potential down
time and rig expense, as well as reducingmaintenance costs. The CTR Tubing Rotator
was designed to extend the life of yourtubing string by rotating the tubing.
This assures that the sucker rods do notwear against only one spot of the
tubing, which will cause prematuretubing failure. The E Style and
E-Plus Tubing Rotators offer thesame benef its of the CTR, but witha low prof ile design feature that
helps to keep the overallwellhead height to a minimum.
Evolution offers two unique DownholeGas Separators to signif icantly increase
pump eff iciencies and oil production.
PC Pump Gas Separator uses centrifugalforces to separate the gas from the produced
liquids before they enter the pump. Liquids arecarried through into the pump while the separated
gas is forced to f low up the annulus.
Beam Pump Gas Separator is designed to provide amethod of allowing gas to migrate up the annulus, thereby
preventing gas locking. The unique modular design makes itthe most f lexible Downhole Gas Separator available on the market.
We also offer a Bottom Feeder Weighted Eccentric Intake and aV-Backed Stainless Steel Pump Intake as well.
Evolution Oil Tools has a complete selection of Artificial Lift Tools and accessories
CTR Tubing Rotator
CDHS Tubing Swivel
SC-1 Anchor Catcher Beam Gas Separator PC Gas Separator Basic No Turn Tool Halbrite No Turn Tool Tubing Centralizer CRTA Rotating Anchor Dynamic Torque Anchor (DTA) Centralizing Torque Anchor (CTA)
E-PLUS Tubing Rotator
2-Way Tubing Swivel
Dynamic Torque Anchor with Extra By-Pass (DTA-XB)
Centralizing Torque Anchor with Extra By-Pass (CTA-XB)
V-Black SS Screen Pump Intake
Eccentric Intake
Burst Plug Tubing Drain Tubing Drain Valve
CANADA
Calgary, AB#3, 1820 - 30th Avenue NECalgary, Alberta T2E 7M5
Toll Free: 1-800-265-8665 (TOOL)Main: (403)243-1442Fax: (403)258-2614
Lloydminster, AB6415A - 63rd Street Close
Lloydminster, Alberta T9V 3B5Main: (780)875-1570Cell: (780)522-8294
USA
Victoria, TXP.O. Box 5363
2908 Coffey streetVictoria, Texas 77903Main: (361)575-7900Fax: (361)575-8081
Odessa, TX3400 Kermit Hwy
Odessa, Texas 79764Main: (432)337-7900Cell: (432)337-7901