Upload
lilian-hope-oliver
View
217
Download
3
Embed Size (px)
Citation preview
Camera Remote Control Unit (AK-HRP150)
Camera remote control unit AK-HRP150 is a camera controller for multi-purpose camera AK-HC900, AK-HC910 and AK-HC1500, and this unit can supply power and G/L signal for a camera
OPERATE Switch Alarm Indicator
MENU ON/OFF Switch
MENU Switch
SCENE FILE Switch
Video Selection Switch
AUTO WHITE Switch
AUTO BLACK Switch
R/B Gain Volume R/B Pedestal Volume
ND Filter Switch CC Filter Switch
Gain Switch andGain Indicator
Shutter Switch andShutter Indicator
Iris F Value orMaster PedestalIndicator
Iris F Value/Master PedestalSwitch
Master PedestalControl
IRIS Control(Rotary Encoder)
12
3
4
5
6
7
8
9 10
11 12
1314
15 16
Tally Indicator
Auto Iris Switch17
18
19 20
1 OPERATE Switch
OPERATE Switch is used for permission of operation forcamera control.Light ON: When power of camera is switched on, OPERATE switch turns on a light and communication between camera and control unit starts.Light OFF: In condition of “Light ON”, OPERATE switch is switched a light off when OPERATE switch is pushed. In this condition, camera control is inhibited.
2 Alarm Indicator
Alarm indicator turns to red color when a fan in the camera stopped.In normal condition, color of this alarm indicator is green.
3 MENU ON/OFF Switch [MENU ON]
When MENU Switch is switched on, camera control menu appearsin a main video line.
4
SCENE FILE Switch [SCENE FILE TRE,USER1,USER2]5
MENU Switch [MENU]When MENU Switch is turned,ITEM can be selected anddata can be changed.When MENU Switch is switched on, ITEM can be confirmedand data can be fixed.
Scene file data which were registered in the camera can becalled.
6 Video Selection Switch [CAM/BAR/TEST MODE]Camera video output can be selected by this switch.CAM Switch light on: Camera Video OutputBAR Switch light on: Color Bar OutputTEST Switch light on: Test Signal Output
Camera Remote Control Unit (AK-HRP150)AUTO WHITE Switch [AUTO WHITE]7
AUTO WHITE Switch is used for automatic white balance.Light ON: This indicates to receive the start of automatic white balance by pushing AUTO WHITE Switch.Light ON and OFF:This alarms that white balance adjustment has not completed after automatic white balance adjustment.Light OFF: This shows that white balance adjustment has completed.
AUTO BLACK Switch [AUTO BLACK]8
AUTO BLACK Switch is used for automatic black balance.Light ON: This indicates to receive the start of automatic black balance by pushing AUTO BLACK Switch.Light ON and OFF:This alarms that black balance adjustment has not completed after automatic black balance adjustment.Light OFF: This shows that black balance adjustment has completed.
R/B Gain Volume [R/B GAIN]9
Red and blue level can be adjusted by these gain volumes.Automatic white balance adjustment can be controlled.
R/B Pedestal Volume [R/B PED]10
Red and blue pedestal can be adjusted by these pedestal volumes.Automatic black balance adjustment can be controlled.
ND Filter Switch [ND FILTER]11
This switch can be used for ND filter selection.ND-1: 100%ND-2: 25%ND-3: 6.3%ND-4: 3.2%CC Filter Switch [CC FILTER]11
This switch can be used for CC filter selection.CC-A: 3200KCC-B: 4300KCC-C: 6300KCC-D: Cross
Gain Switch and Gain Indicator [GAIN]13
Video gain indicates as follows.0dB 9dB 18dB
0dB 9dB
18dBSuper Gain 1Super Gain 2Super Gain 3
Shutter Switch and Shutter Indicator [SHUTTER ON]14
Electronic shutter speed which is selected by camera menucan be switched on and off.A light turns on when shutter function is selected.
Iris F Value/Master Pedestal Switch [CHECK]15
Indication of Iris F value or M-PED value is switched every pushingthis switch.
Iris F Value or Master Pedestal Indicator16
Iris F value or master pedestal value is displayed in this indicator.
Master Pedestal Control
IRIS Control (Rotary Encoder)
Tally Indicator
Auto Iris Switch [AUTO]17
18
19
20
Auto iris operation works by pushing this switch.Light ON: Auto Iris Condition
Tally light turns on when there is a tally input in external tally connector.
Master pedestal can be controlled by this controller.Master pedestal increases by rotating this controller clockwise.Master pedestal and R/G/B pedestal are independent, thenR/G/B pedestals do not change when master pedestal is changed.
Lens iris level can be controlled by this controller.
Camera Remote Control Unit (AK-HRP150)
1 2
3
Power Connector
Camera I/F Connector
Tally Connector
1 Camera I/F Connector (HIROSE:HDAB-15S)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Description Description
Y OUT
Pb OUT
Pr OUT
G/L IN
DC12V IN
GND
TXD
Y GND
Pb GND
P r GND
G/L GND
DC12V GND
TX GND
RXD
RXD GND
Direction of DATATXD:CAM ControllerRXD:Controller CAM
2 Power Connector 3 Tally Connector (HIROSE:HR10A-7R-4P)
1
3
4
Description
21
3
4
Description
2
GND
N.C.
N.C. N.C.
N.C.
DC12V
R TALLY
R TALLY COM
CONNECTORS
SPECIFICATIONS1 Control Item:Refer to control panel description.
2 Operating Temperature: 0°C~+40°C (32°F~104°F)
3 Storage Temperature:-20°C~+60°C (-4°F~140°F)
4 Weight:Approx.1.2kg (2.65lbs)
5 Dimensions:92(W)X225(H)X65(D)mm (3-5/8WX8-7/8HX2-9/16D)6
7
8
9
10 Input Power:DC12V (Cannon 4pin connector)
Tally Input:Contact Closure input
Control System:Asynchronous System(TX/RX signal:RS422)
Synchronous Signal:REF Input(GL Input:Tri Level SYNC)
Camera Interface Connector:D-SUB 15pin Female
DIMENSIONS
CONNECTORS
CONTROL CABLEA control cable (5m) is included in this unit as a standard accessory.
228.
2
6522
522
515
242
15
6.5
6.5
60
32