Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Calmarc
Chemicals2018
Manufacturing Scientists:
Providing performance products and innovative solutions for problems in the building industry since 1980
A company on the move
CALMARC PRODUCTS GENEOLOGY
Ÿ WE RESEARCH AND DESIGN
Ÿ WE MANUFACTURE
Ÿ WE TEST IN OUR COMPREHENSIVE LABORATORY
Ÿ CUSTOMERS HAVE COMPLETE CONFIDENCE AND
SECURITY WITH EASE OF USE AND PERFORMANCE
Ÿ OUR SERVICE AND ADVICE IS ALWAYS AT THE
FOREFRONT
Ÿ A SMART COMPANY TECHNICALLY MOVING WITH THE
TIMES
Ÿ WE ACT AS CONSULTANTS
DIFFERENT
INNOVATIVE
Consultants
BETTER CHEMISTRY
WE RESEARCH AND DESIGN
WE MANUFACTURE
WE TEST IN OUR COMPREHENSIVE LABORATORY
CUSTOMERS HAVE COMPLETE CONFIDENCE AND SECURITY WITH EASE OF USE AND PERFORMANCE
OUR SERVICE AND ADVICE IS ALWAYS AT THE FOREFRONT
A SMART COMPANY TECHNICALLY MOVING WITH THE TIMES
Geoffrey Ledsham (MRACI Chartered Chemist) Managing Director
CALMARC PRODUCTS GENEOLOGY
Dynaclene Acrabit
Dynamic Elastaflex
Geoclene Fibretak
Gleamclene Memflex
Graffi Paint Aquaphobic
Graffi PEN Damppel
Marcmove Lanoac
Marvelclene Plicrete
Maxiclene Hypobond
Neutra Screedbond
Steelclene Supersensor
Vanaclene Aquaphobic
Vanamove Hypobond
WizStrip Gel MXL
Zeta Eco RockHard
Asbestobond Mortar & Double R
Asbestos Primer FastSet L
Attaflex FastSet P
Corropel Plastiflo
Flexideck Titan OBH
Plioxy Titan Setting Plaster
RoofGuard Titan Skim
Tufcote Aquaphobic
XPO-Finish Hypobond
Calicone Repell
Calseal Tilebond
Elastatak Tilecrete
Genprime Addicrete B
Paveseal Addicrete P
Tufseal Addicrete T
Ultraseal Cement Add P
XPO-Finish Demould
Sealers
Resoration
Products
Calmarc Product Listing
Waterproof
Membranes
Surface
Protection
Gypsum Plaster
Finishes
Tiling
Concrete and
Screed Additives
Adhesives
Cleaning
Coatings
1
f
2
Cleaners
3
C A L M A R C C H E M I C A L S
16 Goongarrie St BAYSWATER 6053 T:9378 2022 E:[email protected]
DYNACLENE is a blend of
chemicals in solution, which
is acidic to remove mortar
smudges and white calcium
stains from clay brickwork.
DYNACLENE is a general
acidic cleaner.
DYNACLENE DOES NOT
CONTAIN OXALIC OR
HYDROFLUORIC ACID.
Left side of roundabout cleaned with Dynaclene
4
C A L M A R C C H E M I C A L S
16 Goongarrie St BAYSWATER 6053 T:9378 2022 E:[email protected]
DYNACLENE is a blend of
chemicals in solution, which
is acidic to remove mortar
smudges and white calcium
stains from clay brickwork.
DYNACLENE is a general
acidic cleaner.
DYNACLENE DOES NOT
CONTAIN OXALIC OR
HYDROFLUORIC ACID.
Left side of roundabout cleaned with Dynaclene
DESCRIPTION
DYNAMIC is a multipurpose cleaner that does not
contain solvents, caustics or conventional additives
which standard cleaners have.
DYNAMIC is designed to be biologically and
environmentally safe.
DYNAMIC has the ability to remove many types of
stains off a variety of surfaces.
DYNAMIC is used to remove stains from surfaces
such as concrete, clay and concrete paving,
ceramic tiles, grout, industrial painted surfaces
(factory floors), shower doors and vinyl sheet as
examples.
DIRECTIONS
DYNAMIC
should at all
times be
trialled on a
small section
of surface to
be cleaned to
evaluate its
performance
or any
harmful effect
on the surface.
Calmarc Chemicals
DYNAMIC
16 Goongarrie St, BAYSWATER WA 6053 6
BEFORE
AFTER
5
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
CALMARC CHEMICALS
GEOCLENEa GEOCLENE is excellent for removing iron staining off
clay bricks and other mineral substrates
a GEOCLENE can be used for acid-etching concrete.
a GEOCLENE can be used for remedial works involving
burnt brickwork.
a GEOCLENE is used for cleaning coloured concrete
blockwork.
GEOCLENE is a blend of chemicals
in solution,
which is acidic, and
far safer than
Oxalic and
Hydrofluoric acid
solutions.
GEOCLENE is an
excellent solution
for
removing iron
stains from
masonry surfaces
GEOCLENE the b
est bore
stain
rem
over !!!
6
GLEAMCLENE ISDESIGNED TO
CLEAN IRON ANDSTEEL WITHOUTATTACKING THE
METAL
CALMARC CHEMICALS1 6 Goongarr ie S t , BAYSWATER WA 6503 T : 93782022 , E : ca lmarc@westne t . com .au
Gleamclene
GLEAMCLENE CLEANS RUST AND CALCIUM STAINS FROM TOILET BOWLS
REMOVES RUST FROM IRON.
Soak rus ted s tee l ob jec ts in GLEAMCLENE wi th water up to 3 t imes . Do no t soak
a lumin ium , copper , o r o ther amphoter i cmeta ls . The amount o f d i l u t ion depends on
the degree o f rus t to be removed and i t s age .
7
GRAFFIPAINTREMOVER
16 GOONGARRIE St BAYSWATER
CALMARC CHEMICALS
Ÿ GRAFFI PAINT REMOVER I s
Ÿ excellent for removing graffiti from unpainted sandstone, limestone, clay brickwork , concrete, concrete block , various stone and granite materials.
Ÿ GRAFFI PAINT REMOVER is fast acting with the removal action on Graffiti
Ÿ GRAFFI PAINT REMOVER i s sold in packs of 5, 10 and 20 Litre.
FOR MORE INFORMATION, VISITWWW.CALMARC.COM.AU
excellent for removing graffiti from excellent for removing graffiti from
8
GRAFFI PEN & CRAYON REMOVER is a clear thin liquid
solution which removes marker pen, felt pen and wax
crayon graffiti. The product does not contain any types
of ACIDS or ALKALIES.
_ Safe solvent system for removal of mentioned stains._ Does not contain acids or alkalies(caustic)_ No deposits or residue after use._ Can be used on many types of surfaces_ Very low odour.
16 Goongarrie St BAYSWATER, WA 6503 T 9378 2022 E [email protected]
Calmarc Chemicals
Graf Pen Remover
9
GLEAMCLENE ISDESIGNED TO
CLEAN IRON ANDSTEEL WITHOUT ATTACKING THE
METAL
16 Goongarrie St, BAYSWATER WA 6503 T: 9378 2022, E: [email protected]
Calmarc Chemicals
MarcmoveCLEAN UP WITH
MARCMOVE IS SUITABLE FOR REMOVING:MINERAL OILS AND GREASES FROM CONCRETE
OR METAL.TYRE MARKS ON CONCRETE.
CLEAN UP SURFACE RESIDUE AFTER USINGPAINT STRIPPERS.
REMOVAL OF ACRYLIC OR PVA COATINGS AND SEALERS.
REMOVAL OF LIGHT GRAFFITI.
10
C
MARVELCLENE
MARVELCLENE
Ÿ cleans glazed ceramic e.g. toilet bowls.
Ÿ removes rust from iron and steel.Ÿ removes iron bore stains.Ÿ Red iron stains on acid burnt
bricks.Ÿ Manganese stains on clay
brickwork.Ÿ Light calcium carbonate stains on
glass or cutlery.
16 Goongarrie StBAYSWATER
Tel 9378 2022
CALMARC CHEMICALSwww.calmarc.com
CONTACT
11
MAXICLENE
MAXICLENE is highly effective
for removing mortar smudges
red rust
and white calcium stains
from clay brickwork
NOTE:
Only persons that have a licence from the Health Department are permitted to purchase
this product
16 Goongarrie St, BAYSWATER WA 6503 T: 9378 2022, E: [email protected]
12
MAXICLENE IS A MIXTURE OF VERY STRONG ACIDS IN SOLUTION
12
CALMARC CHEMICALS
NEUTRA RTU
DESCRIPTION
NEUTRA RTU is a clear alkaline soluon (pH 10)
which has similar chemical properes to
ammonia but without the pungent odour.
Wall pH neutralised with NEUTRA RTU a�er brick cleaning withGEOCLENE
NEUTRA RTU is used to neutralize mineral or organic acid residues
remaining in brickwork or concrete. The acon of NEUTRA RTU
eliminates the acid fumes which slowly come out of brickwork and aack
internal metal fixtures or leave a white, powdery layer over objects inside a
house or building.
16 Goongarrie St BAYSWATER,WA6503
T 9378 2022 E [email protected]
13
STEELECLENESTEELCLENE is a unique formulation of safe complex food grade organic acids
that remove rust from steel but does not harm the steel or the surrounding
concrete. STEELCLENE creates an anti-oxidant layer. STEELCLENE is best
used for removing surface rust. Scale and larger pieces of rust should be removed
beforehand. STEELCLENE is very safe to use. In some instances it is a little
slower than standard rust removing acids.
STEELCLENE is applied directly to the steel. It should be gently scrubbed over
the steel surface. After 15-30 minutes, lightly rusted steel becomes shiny. It will
require longer contact for old, pitted rusty iron. Wash off with NEUTRA diluted 9
parts with water and leave to dry or, preferably, wipe off with a rag. Apply two
coats of CORROPEL or as soon as possible to inhibit any surface rusting.
CORROPEL can be overcoated with normal paints or left as finishing coat to suit
the finishing requirements. Two coats of CORROPEL are quite suitable as a
topcoat system. Three coats of CORROPEL can be required for harsh areas.
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
Rusted steel soakd in steelclene diluted with three parts of water removes old residual rust
14
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
VANACLENE is a formulated
acidic product designed to remove
vanadium staining (especially yellow) from clay brickwork.
VANACLENE can be used with hydrochloric acid or as supplied. For both
uses it is diluted with water. Brickwork cleaned with VANACLENE has a very
bright clean fresh look which is striking to the eye. After cleaning, neutralise the brickwork with Neutra to
neutralise and residue acid.
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
VANACLENEAcid cleaner, designedespecially to remove yellow vanadium.
CALMARC CHEMICALS
15
APPLICATION
Always do sample patches to achieve a definive RESULT. Use on a dry clay brick, cleaning small areas or wall secons at a me. SCRUB ON VANAMOVE, UNDILUTED, ONTO STAIN TO BE TREATED. LEAVE FOR 5 - 10 MIUTES. Pressure wash down with water a�er cleaning. NEUTRA is recommended at a diluon of 1 : 9 with water to be sprayed over complete job a�er all cleaning is completed to neutralise any residual acid. Refer to the NEUTRA informaon sheet for detailed instrucons.
16 Goongarrie St, BAYSWATER WA 6503 T: 9378 2022, E: [email protected]
DESCRIPTION
VANAMOVE is formulated especially AS A SINGLE AGENT TO REMOVE
BROWN VANADIUM STAINS FROM CLAY
BRICKWORK. DO NOT USE ON
CONCRETE.
VANAMOVE
CALMARC CHEMICALS
16
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
WIZSTRIP STRIPS PAINT IN A FLASH
WIZSTRIP is a gelled liquid blend of medium volatile aromatic and aliphatic solvents designed to be a fast acting paint and varnish remover. It contains neither
methylene chloride nor hydrofluoric acids.
It is a deep acting and non-drip formula. Containing emulsifying surfactants, the softened paint and residue
can be flushed off with water.
Easily applied using a paint brushWIZ-STRIP IS VIRTUALLY ODOURLESS
WIZ-STRIP
Calmarc Chemicals
QUICK A
CTING
SAFE TO USE
17
ZETA ECOZETA ECO COMBINES SAFE RAW MATERIALS WITH SKILLED FORMULATION TO PRODUCE OUTSTANDING CLEANING RESULTS ON MANY SUBSTRATES
USED TO CLEAN AND REJUVENATE PAVING, BOTH CLAY AND CONCRETE, PAINTED SURFACES, REMOVAL OF TYRE MARKS, GREASE AND OILS, ADHESIVES AND GENERAL PURPOSE REMOVAL OF HARD IMPREGNATED INDUSTRIAL DIRT.
NATURAL & SAFE
INGREDIENTS CLEANER
SHOWERS AND GROUTS: Apply ZETA ECO to grout and shower tiles and scrub over with a non abrasive pad. Wash down with water. Apply ZETA ECO to a wet shower screen and wipe over with a non abrasive sponge. Wash down with water and let dry. Ideal time for cleaning is after showering when shower is still wet..
16 Goongarrie St BAYSWATER WA 6053
T 08 93782022 E [email protected]
Coatings
19
ASBESTOBOND applied as supplied as a
spray over asbestos that has been treated
ASBESTOS PRIMER. The combination of
these products forms a membrane over the
mould-covered asbestos roof, giving it a new,
clean and enhanced appearance.
16 Goongarrie St, BAYSWATER WA 6503 T: 9378 2022, E: [email protected]
Calmarc Chemicals
FUNGATROL
ASBESTOSPRIMER
ASBESTOBOND
ASBESTOBOND
20
CALMARC CHEMICALS
16
GOONGARRIE
ST
BAYSWATER
The recommended asbestos encapsulation
process requires ASBESTOS PRIMER
followed by ASBESTOBOND which has a
coloured top coating of either TUFSEAL or
MEMFLEX.
The combination of the products as listed
above forms a membrane over the mould
covered asbestos roof giving it a new, clean
and enhanced appearance.
Some asbestos roofs are very badly affected
by mould growth. Mould inhibitor may also be
requested for extra protection before the
encapsulation coating system is applied. In
both cases, FUNGATROL solution can be
applied before applying ASBESTOS PRIMER.
HIGH LOADINGS OF FUNGICIDES AND ALGICIDES
FORMS A HARD PENETRATIVE FILM WHICH ACTS AS A BINDER AND SEALER
DRIES QUICKLY TO FORM A CLEAR FILM
FIX YOUR ASBESTOS PROBLEMS TODAY
A S B E S T O S P R I M E R
r ecommended Asbes tosencapsu la t i on p rocess
21
ATTAFLEX
WATERBASEDWATERPROOF MEMBRANE COATING
Decorative and trafficable coating
for factory floors and walls.
ATTAFLEX is a “membrane”
coating which has an
excellent degree of
flexibility with toughness.
WWW.CALMARC.COM
CALMARCCHEMICALS
16 GOONGARRIE ST, BAYSWATER WA 6053
ü PAVING
ü DRIVEWAYS
ü CONCRETE AREAS
ü PATIOS
ü SWIMMING POOLS
SURROUNDS
ü PLUS MORE
22
CORROPEL
CORROPEL is a pure-acrylic water based paint with superb anti-corrosive c h a r a c t e r i s t i c s a n d e n h a n c e d fl a s h r u s t prevention. CORROPEL is safe to use.CORROPEL can, when correctly pigmented, be an e ff e c t i v e i n s u l a t i o n coating - it can reduce i n t e r n a l b u i l d i n g
otemperature up to 10 C.CORROPEL can when modified can be a useful intumescent coating for fire protection, by delaying temperature rise during fire that can effect the integr i ty of the steel structural members.
FEATURESŸ CORROPEL has exceptional adhesion.Ÿ CORROPEL decreases noise and sound when
applied to metal sheet.Ÿ CORROPEL can be used as an insulation coating,
0decreasing temperatures in the vicinity of 10 C.Ÿ CORROPEL is environmentally friendly.Ÿ CORROPEL exhibits excellent resistance to oils,
environmental abrasion, water, dilute alkali and acids
Ÿ CORROPEL can be used as a finish coat system or as a primer for waterborne coatings.
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc ChemicalsW
ater
base
d, no
n-tox
ic ex
celle
nt ru
st pr
even
tion o
n ste
el.
23
FLEXIDECK
FLEXI-DECK is a high build, extremely tough waterbased, environmentally friendly, acrylic non-slip coating,with rubber granules, designed for use in the marine and
construction industries. CALMARC CHEMICALS
16 GOONGARRIE ST BAYSWATER WA 6053
24
FROM
THIS
TO T
HIS
The Plioxy effect!
CALMARC CHEMICALS16 Goongarrie StreetBayswater WA 6503T (08) 9378 2022E [email protected] www.calmarc.com.au
P L I O X YŸ INDUSTRIAL WATER-BASED
COATING
Ÿ USED WITH FIBREGLASS FOR
MOULDED PRODUCTS OR AN
OVERLAY ON CRACKED
CONCRETE AS AN EXAMPLE
Ÿ DECORATIVE AND
TRAFFICABLE COATING FOR
PAVING, DRIVEWAYS, SERVICE
AREAS, PATIOS SWIMMING
POOL SURROUNDS AND
FACTORY FLOORS AND
WALLS
Ÿ WORK BOAT DECK COATING
Ÿ INDUSTRIAL COATING FOR
METAL, BRICK O CONCRETE
BUILDINGS
25
ROOFGUARD
AFTER
BEFORE
Features
ROOFGUARD
AFTER
BEFORE
Features
ROOFGUARD
AFTER
BEFORE
Features
26
TUFCOTE
TWO PACK WATER BASED PAVEMENTCOATING, FORMULATED FOR DURABILITY
WITH HIGH ADHESION
TUFCOTE is an easy to use two pack cement/resin coating which is easy to mix and easy to apply.TUFCOTE is supplied in a range of factory colours to customers requirements.TUFCOTE may be used as a nal, durable wearing surface The TUFCOTE surface may also be nally seal coated to give an attractive gloss nish
CALMARC CHEMICALS16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
ROOFGUARD
AFTER
BEFORE
Features
27
XPO Finish
Calmarc Chemicals
XPO FINISH is a very hard acrylic product whichis trafficable coloured or clear. XPO-FINISH is suitable for sealing a variety ofconcrete substrates. XPO-FINISH is used as a sealer on ceramicsubstrates eg. terracotta tiles, slate, clay andconcrete paving. XPO-FINISH can be used to seal reconstitutedlimestone concrete pavers and exposedaggregate concrete. XPO-FINISH can be used a multitude of surfacesthat require a high gloss finish which is resilientand tough.
16 Goongarrie St BAYSWATER 6503 T: 93782022
WATERBASED
28
XPO Finish
Calmarc Chemicals
XPO FINISH is a very hard acrylic product whichis trafficable coloured or clear. XPO-FINISH is suitable for sealing a variety ofconcrete substrates. XPO-FINISH is used as a sealer on ceramicsubstrates eg. terracotta tiles, slate, clay andconcrete paving. XPO-FINISH can be used to seal reconstitutedlimestone concrete pavers and exposedaggregate concrete. XPO-FINISH can be used a multitude of surfacesthat require a high gloss finish which is resilientand tough.
16 Goongarrie St BAYSWATER 6503 T: 93782022
WATERBASED
Sealers
29
CALMARC CHEMICALS
CALICONE
FEATURES
16 Goongarrie st BAYSWATER WA 6503 T 93782022 E [email protected]
30
CALSEAL W A T E R B O R N E P U R E
A C R Y L I C R E S I N
CALMARC CHEMICALS www.calmarc.com
E [email protected] T (08) 9378 2022
16 Goongarries StBAYSWATER WA 6053
CONTACT
Coloured finish- for highbuild coatings.Two coat colouredfinish for exteriorrenders. Clear - for sealingporous sustratesinternally such asnatural limestone walls.
FEATURESCALSEAL exhibits excellent filmproperties with clarity, durability andresistance to marring, UV, water andsoiling. CALSEAL contains a particularwax to assist these properties.
31
ELASTATAK
Calmarc Chemicals
ELASTATAK
Calmarc Chemicals
ELASTATAK
Calmarc Chemicals
32
CALMARC CHEMICALS16 GOONGARRIE ST BAYSWATER,6503
T 9378 2022 E [email protected]
GENPRIME
FEATURES
GENPRIME is a waterborne fine-particle pure acrylic primer
GENPRIME is designed to be used for priming surfaces in preparation
for secondary coating applications.
GENPRIME can be used internally and externally on horizontal and
vertical surfaces as a primer/sealer.
GENPRIME can be used externally or internally.
GENPRIME dries to an ideal uniform base for over-coating with a wide range of water based paint systems.
GENPRIME is suitable for pedestrian and other light traffic when fully cured and prior to overcoating.
33
PAVESEAL
The finish can be gloss or matt and as a
clear gloss gives a “wet-look” finish for
internal use only.
The coloured finish can last 4 - 6 years and
the clear from 1 - 2 years before re-coat.
These figures dependant in use
conditions
EXCELLENT DRY
FILM PROPERTIES
PAVESEAL CLEAR OR COLOURED FINISH
LONG LIFE EXPECTANCY
CALMARC CHEMICALSwww.calmarc.comT 9378 2022
16 Goongarrie St BAYSWATERWA 6503
HARD “WET LOOK” CLEAR OR COLOURED COATING
PAVESEAL a solution acrylic terpolymer
coating which is a penetrating sealer
system.
Displays clarity, durability, binding ability
and a great resistance to soiling and
marring.
34
CALMARC CHEMICALS
TUFSEAL is a waterborne fine-particle pure acrylic resin. TUFSEAL is an excellent roof and wall coating.
TUFSEAL is ideal for
Ü Sealing of substrates, e.g. brick, concrete for subsequent top coating products.
Ü Sealer for porous or dense substrates, either clear or coloured
Ü Sealer for ROOFGUARD coating of roof tiles.
TUFSEAL
TUFSEAL is a premium waterborne fine-particle pure acrylic resin sealer/barrier coating.
TUFSEAL is an excellent, tough roof and wall sealer.
TUFSEAL exhibits excellent film properties with clarity, gloss and durability.
TUFSEAL resistant to blocking, soiling and it resists algae and fungi growth.
CALMARC CHEMICALSwww.calmarc.com
16 Goongarrie St BAYSWATERT 9378 2022
35
ULTRASEAL has been designed specifically to produce a high gloss sealed finish without the use of hazardous solvents for
internal use.
ULTRASEAL is suitable for sealing a variety of internal concrete substrates including concrete floors.
ULTRASEAL is used as a sealer on ceramic substrates eg. terracotta tiles, slate, clay and concrete paving, honed
concrete and sanded timber floors.
Calmarc Chemicals
16 Goongarrie St BAYSWATER WA 6053
ULTRASEAL
36
XPO Finish
Calmarc Chemicals
XPO FINISH is a very hard acrylic product whichis trafficable coloured or clear. XPO-FINISH is suitable for sealing a variety ofconcrete substrates. XPO-FINISH is used as a sealer on ceramicsubstrates eg. terracotta tiles, slate, clay andconcrete paving. XPO-FINISH can be used to seal reconstitutedlimestone concrete pavers and exposedaggregate concrete. XPO-FINISH can be used a multitude of surfacesthat require a high gloss finish which is resilientand tough.
16 Goongarrie St BAYSWATER 6503 T: 93782022
WATERBASED
37
f
38
Waterproof Membranes
39
ACRABIT IS ESPECIALLY EFFECTIVE FOR POSITIVE SIDE WATER PROOFING OF PLANTER BOXES AND RETAINING WALLS.Ÿ ACRABIT is easy to apply with high build.Ÿ ACRABIT is waterbased, low odour, non flammable and
non-toxic, flexible bitumen/resin modified waterproof membrane.
Ÿ ACRABIT is cold applied and cleans up with water.Ÿ ACRABIT is microfibre reinforced, giving extra
durability.Ÿ ACRABIT has excellent elongation.Ÿ ACRABIT has excellent impact resistance
WATERBASED, LOW ODOUR DURABLE RESIN MODIFIED WATER PROOF
CALMARCCHEMICALS
ACRABIT
16 GOONGARRIE ST BAYSWATER,6503
FEATURES
* Concrete
* Cement/sand screeds,
renders
* Masonry and concrete
block work
* Natural and Reconstituted
limestone blockwork
APPLICABLE SUBSTRATES
40
Elastaflex
HIGHLY EFFECTIVE, ECONOMIC FELXIBLE WATERPROOF MEMBRANE WITH HIGH
PERFORMANCE
Does not re-emulsify
Calmarc Chemicals16 Goongarrie St BAYSWATER WA 6053
FIBRETAK16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc ChemicalsW
ater
base
d, no
n-tox
ic ex
celle
nt ru
st pr
even
tion o
n ste
el
FIBRETAK is a synthec rubber-acrylic compound
elastomeric-adhesive resin supplied in a waterborne
emulsion form. The dry film is tough, resilient and elasc,
with excellent bond.
FIBRETAK was developed for adhering chopped strand
fibreglass mat to substrates to form a protecve membrane
for concrete, galvanised or coated iron, chipboard, fibre
cement sheets.
This product combinaon creates a fresh covering to lay
subsequent finishes onto, thus virtually eliminang defects
of the substrate.
Using this FIBRETAK system, any cracks in the substrata are
presented a tough, flexible membrane overlay onto which
coangs, screeds, ceramic les etc. can be laid.
42
PONDS, BIRD BATHS, EXTERNAL TIMBERS, INTER-
NAL AND EXTERNAL WATERPROOFING.
MEMFLEX IS A WATER-BASED PRODUCT AND IS
SUPPLIED IN VARIOUS COLOURS
© MEMFLEX is a flexible membrane coating with high
adhesion, resilience and excellent UV resistance.
© MEMFLEX forms a tough flexible film that is capable
of coping with substrate movements and cracks.
© MEMFLEX is able to withstand impact and possesses
excellent rebound properties.
© MEMFLEX can be applied by brush, roller, by trowel-
ling or by spray.
© MEMFLEX sets up as a film which becomes a tough
waterproof membrane when fully set.
MEMFLEX
CALMARC CHEMICALS
43
f
44
Surface Protection
45
AQUAPHOBICUsed to treat absorbent fine
pore building materials so that they repel water. Suitable for surfaces such as cement render
(float), gypsum plaster, concrete, clay bricks, sand, lime bricks, concrete blocks,
natural stone (for example granite or fine sandstone) and painted
surfaces and rising damp
A very highly
specialised
silicone with high
penetrating
properties.
Calmarc Chemicals
16 Goongarrie St BAYSWATER WA 6053
The
AQUAPHOBIC
treatment
allows
substrates to
continue to
breathe after
application
T 9378 2022 E [email protected]
46
DAMP-PEL
WA T E R B A S ED
SUPER EFFICIENT WATER-REPELLENT
WWW.CALMARC.COM
CALMARCCHEMICALS
1 6 GOONGARRIE ST BAYSWATER WA 6053Tel 9378 2022
DAMP-PEL W is an aqueous emulsion concentrate which is used to make
mineral building materials damp-proof and water repellent, allowing
breathing.
APPLICATIONS
-Injection into building foundations at or below floor level to form a damp
course.
-Making plasterboard repellent.
-Making fired clay and concrete products water repellent.
47
_ LANOAC 100 has exceptional adhesion.
_ LANOAC 100 is environmentally friendly.
_ LANOAC 100 is a short term thin film corrosion protectant.
_ LANOAC 100 is suitable for storage of metal parts stored
undercover.
_ LANOAC 100 is suitable to use on industrial machinery where water
is involved with the industrial process.
_ LANOAC 100 is used for marine craft as a corrosion protectant
especially where paint has chipped.
Lanoac 100
LANOAC 100 is a penetrating extremely low VOC
lanolin anti corrosive protectant, that is used as a thin
sealer coating on metal. Additional water repellants are
included to reinforce overall anti corrosive protection to
the surface on a short term basis.
16 Goongarrie St BAYSWATER,WA 6503 T 9378 2022 E [email protected] Chemicals
LANOSIL
CALMARC CHEMICALS
48
LANOSIL
CALMARC CHEMICALS
49
Plicrete
DESCRIPTION
PLICRETE is used for
reverse (negative)
waterproofing and as a seal
coat on concrete flooring
with rising moisture
FEATURES
PLICRETE is awaterproof surface
coating and is suitableas a waterproof
submergable coatingin water containing
structures. PLICRETE has
resilience and is quitetough.
PLICRETE hasexcellent adhesion to
damp and poroussubstrates.
USES
• Direct application ontodamp masonry walls, e.g :cellars, bathrooms. • Waterproof coating forswimming pools, gardenornaments, bird baths. • Primer coating onapplicable substrates forapplication of finishing topcoatings.
Plicrete
DESCRIPTION
PLICRETE is used for
reverse (negative)
waterproofing and as a seal
coat on concrete flooring
with rising moisture
FEATURES
PLICRETE is awaterproof surface
coating and is suitableas a waterproof
submergable coatingin water containing
structures. PLICRETE has
resilience and is quitetough.
PLICRETE hasexcellent adhesion to
damp and poroussubstrates.
USES
• Direct application ontodamp masonry walls, e.g :cellars, bathrooms. • Waterproof coating forswimming pools, gardenornaments, bird baths. • Primer coating onapplicable substrates forapplication of finishing topcoatings.
50
Plicrete
DESCRIPTION
PLICRETE is used for
reverse (negative)
waterproofing and as a seal
coat on concrete flooring
with rising moisture
FEATURES
PLICRETE is awaterproof surface
coating and is suitableas a waterproof
submergable coatingin water containing
structures. PLICRETE has
resilience and is quitetough.
PLICRETE hasexcellent adhesion to
damp and poroussubstrates.
USES
• Direct application ontodamp masonry walls, e.g :cellars, bathrooms. • Waterproof coating forswimming pools, gardenornaments, bird baths. • Primer coating onapplicable substrates forapplication of finishing topcoatings.
Plicrete
DESCRIPTION
PLICRETE is used for
reverse (negative)
waterproofing and as a seal
coat on concrete flooring
with rising moisture
FEATURES
PLICRETE is awaterproof surface
coating and is suitableas a waterproof
submergable coatingin water containing
structures. PLICRETE has
resilience and is quitetough.
PLICRETE hasexcellent adhesion to
damp and poroussubstrates.
USES
• Direct application ontodamp masonry walls, e.g :cellars, bathrooms. • Waterproof coating forswimming pools, gardenornaments, bird baths. • Primer coating onapplicable substrates forapplication of finishing topcoatings.
Adhesives
51
HYPOBOND
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
CALMARC CHEMICALS
A P P L I C A T I O N
HYPOBOND is designed to
be injected by low pressure
to form a bonding adhesive
layer when set between
delaminated substrates. This
eliminates the need for
c o m p l e t e r e m o v a l a n d
replacement.
DR
UM
MY T
ILES
?
N
AN
Y M
OR
E !!
Ÿ Bonding drummy ceramic
tiles.
Ÿ drummy cement/ Bonding
sand render.
Ÿ drummy screeds.Bonding
Enquire today52
SC
RE
ED
BO
ND
Improves adhesion to many surfaces e.g. concrete, cement sheet, iron, tiles, bitumen and
brickwork.
Gives excellent resistance against water and water
vapour, salt penetration and improved protection against most chemicals except acids
Increases bond strength toughness,
flexibility and resistance to heat and
ageing. SCREEDBOND is used
extensively as the modifier of cement
screeds and renders.SCREEDBOND cement mixes
have good workability at low
water cement ratios.
SCREEDBOND cement can be
applied in thin layers and
diminishes dusting of the final
concrete layer.
Calmarc Chemicals16 Goongarrie St BAYSWATER 6503
SCREEDBONDfixed this. Ask ushow!
53
SUPERSENSORissuitableforsuchsubstratesastimbersubloors,particleboard,
plywoodlooringofapprovedgrades,dryconcreteloors
andonoldvinyl.Excellenttobondvinylsheetontoverticalsurfaces
Supersensor
SUPERSENSORisaveryhighstrength
pressuresensitiveadhesiveforusewith
vinyltiles,vinylsheet,carpettilesand
rubberbasedacousticmatting.
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Description
Uses
SUPER FASTAND STRONG
ADHESION
54
Restoration Products
55
AQUAPHOBICUsed to treat absorbent fine
pore building materials so that they repel water. Suitable for surfaces such as cement render
(float), gypsum plaster, concrete, clay bricks, sand, lime bricks, concrete blocks,
natural stone (for example granite or fine sandstone) and painted
surfaces and rising damp
A very highly
specialised
silicone with high
penetrating
properties.
Calmarc Chemicals
16 Goongarrie St BAYSWATER WA 6053
The
AQUAPHOBIC
treatment
allows
substrates to
continue to
breathe after
application
T 9378 2022 E [email protected]
56
HYPOBOND
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
CALMARC CHEMICALS
A P P L I C A T I O N
HYPOBOND is designed to
be injected by low pressure
to form a bonding adhesive
layer when set between
delaminated substrates. This
eliminates the need for
c o m p l e t e r e m o v a l a n d
replacement.
DR
UM
MY T
ILES
?
N
AN
Y M
OR
E !!
Ÿ Bonding drummy ceramic
tiles.
Ÿ drummy cement/ Bonding
sand render.
Ÿ drummy screeds.Bonding
Enquire today57
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
Suitable for replacing:Ÿ sand/cement mortars, Ÿ fretted mortarsŸ re-groutingŸ tuck-pointing
Contains Ÿ bonding and water retention agents Ÿ Plus dispersion with, stabilisation and extrusion aids.
MXL can be coloured.
The synthetic rubber latex resin in MXL fixes the colour in the cement matrix which protects it from fading.
MXLc
om
pl
et
e r
ep
la
ce
me
nt
fo
r w
at
er
in
ce
me
nt
sa
nd
mo
rt
ar
s
58
ROCKHARD IS A READY
TO USE FOR THE
STRENGTHENING OF
CONSTRUCTION
MATERIALS.
ROCKHARD
CALMARC CHEMICALS
16 GOONGARRIE ST BAYSWATER
59
SBR
60
Mortar & Render Finishes
61
Double R
C a l m a r cC h e m i c a l s
D O U B L E R c o m b i n e s t h e u n i q u e b l e n d o f i n g r e d i e n t s w h i c h h a v e t h e p r o p e r t y o f r e t a r d i n g c e m e n t m i x e s i n a c o n s i s t e n t t i m e . D O U B L E R i s s u i t a b l e t o b e u s e d t o r e t a r d e x p o s e d a g g r e g a t e c o n c r e t e .
V i s i t o u rw e b s i t e f o r
m o r ei n f o r m a t i o n
16 Goongarrie StBAYSWATER
www calmarc.com
62
FAST-SET L 16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc ChemicalsFA
STSE
T-L D
ECRE
ASES
THE S
ETTIN
G TIM
E OF C
ONCR
ETE
DESCRIPTION
FASTSET-L decreases the setting time of concrete which allows moulds to be stripped earlier in cold weather. FAST SET-L has no calcium chloride. FAST SET-L is based on Calcium Nitrate which is a very effective concrete set accelerator, and does not cause corrosion in steel reinforcement.
FASTSET-L is a liquid additive that decreases the setting time of concrete allowing moulds to be stripped earlier in cold weather.
FAST SET-L is not based on calcium chloride.
FAST SET-L is based on Calcium salts (food grade) and are very effective concrete set accelerators, which do not cause corrosion in steel reinforcement.
63
FAST-SET P 16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc ChemicalsFA
STSE
T-L D
ECRE
ASES
THE S
ETTIN
G TIM
E OF C
ONCR
ETE
DESCRIPTION
FASTSET-L decreases the setting time of concrete which allows moulds to be stripped earlier in cold weather. FAST SET-L has no calcium chloride. FAST SET-L is based on Calcium Nitrate which is a very effective concrete set accelerator, and does not cause corrosion in steel reinforcement.
FASTSET-P is a granular additive incorporated with dry ingredients (sand/aggregate) before mixing the concrete to decrease the setting time of product allowing moulds to be stripped earlier in cold weather.
FAST SET-P is not based on calcium chloride, but uses alternative calcium salts (food grade) that have no adverse effect on re-inforcing materials in the matrix.
FAST SET-P is a very effective concrete set accelerator, and does not cause corrosion in steel reinforcement.
FAST
SET-P
DEC
REAS
ES TH
E SET
TING
TIME O
F CON
CRET
E
64
MED
ICINE FO
R
MO
RTA
RS A
ND
REN
DER
S !
A N
ON
AE
RA
TIN
G
PLAST
ISIZ
ER
65
f
66
Gypsum Plaster Finishes
67
TITAN ONE BAGHARDWALLPLASTER
NO LIME REQUIRED PAINT THE NEXT DAY
NO CRACKING HARD FINISH
T I T A N H A R D W A L L i s e s p e c i a l l y f o r m u l a t e d f o r u s e a s a h a r d v e n e e r
w h i t e p l a s t e r f i n i s h o n c e m e n t o r g y p s u m p l a s t e r r e n d e r s , p l a s t e r
s h e e t b o a r d o r c e m e n t f i b e r b o a r d . T h e s a m e b a g o f p l a s t e r c a n b e u s e d i n a p l a s t e r s a n d o r a p l a s t e r p e r l i t e
r e n d e r .
Cement
Render
Titan OBH
WHITE
CALMARC CHEMICALS
68
LIME PUTTY ORHYDRATED LIME
POWDER IS NOTREQUIRED OR
RECOMMENDED TO BE MIXED WITH TITAN SETTING
PLASTER.
16 Goongarrie St BAYSWATER E [email protected]
WHITE
69
Tiling
71
AQUAPHOBICUsed to treat absorbent fine
pore building materials so that they repel water. Suitable for surfaces such as cement render
(float), gypsum plaster, concrete, clay bricks, sand, lime bricks, concrete blocks,
natural stone (for example granite or fine sandstone) and painted
surfaces and rising damp
A very highly
specialised
silicone with high
penetrating
properties.
Calmarc Chemicals
16 Goongarrie St BAYSWATER WA 6053
The
AQUAPHOBIC
treatment
allows
substrates to
continue to
breathe after
application
T 9378 2022 E [email protected]
72
HYPOBOND
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
CALMARC CHEMICALS
A P P L I C A T I O N
HYPOBOND is designed to
be injected by low pressure
to form a bonding adhesive
layer when set between
delaminated substrates. This
eliminates the need for
c o m p l e t e r e m o v a l a n d
replacement.
DR
UM
MY T
ILES
?
N
AN
Y M
OR
E !!
Ÿ Bonding drummy ceramic
tiles.
Ÿ drummy cement/ Bonding
sand render.
Ÿ drummy screeds.Bonding
Enquire today73
REPELL
DESCRIPTION
CALMARCCHEMICALS
For more information contact
16 Goongarrie St BAYSWATER WA 6503
T 08 9378 202274
TILEBOND
LONG TERM RELIABILITY
SINGLE PACKADHESIVE FORALL OF YOUR
TILINGSOLUTIONS
75
TILECRETE TILECRETE IS SUPPLIED
READY-TO-USE AS A TWO-PACK ADHESIVE.
Vis i t our s tore today for a l l o fyour t i l ing so lut ions .
Bonds ceramic tiles to cement render,
concrete, bricks and plaster board.
Suitable for tiling walls and floors
Calmarc Chemicals76
Concrete & Screed Additives
77
CONCRETE ADDITIVES
ADDICRETE BDESCRIPTIONADDICRETE B is designed to increase market appeal and product durability of concrete finished goods in various applications e.g. Concrete pavers Bricks Blocks Premix concrete
\
BENEFITS· High water and salt resistance· No unsightly chalking on finished products.· Improved aesthetics, brighter, even colours.· Improved structural integrity of products, better
strength and abrasion resistance.· One product for colour and cement dispersion
and efflorescence control. No other additives needed.
· Minimal cost per mix.· Has the characteristic of reducing cement
demand in mixes whilst improving set concrete strength
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
78
CONCRETE ADDITIVES
ADDICRETE PDESCRIPTIONADDICRETE P is a safe additive designed to control the release of salts from concrete products, greatly increasing their market appeal and durability. ADDICRETE P reacts with soluble salts in the cement-aggregate matrix and prevents them from migrating as soluble salts to the surfaces of finished products. ADDICRETE P also acts as a cement and colour dispersion agent in the concrete wet mix as well as a water reducer.\
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
Ÿ BENEFITSŸ No unsightly chalking on finished
products.Ÿ Improved aesthetics, brighter, even
colours.Ÿ Improved structural integrity of
products,better strength and abrasion resistance.
Ÿ One product for colour and cements dispersion and efflorescence control.
Ÿ No secondary additives needed.Ÿ Minimal cost per mix.Ÿ Has the ability to reduce cement in
mixes whilst increasing strength and abrasion of finished products
Ÿ designed for normal concrete products and concrete pads
79
CONCRETE ADDITIVES
ADDICRETE T
16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
ADDICRETE T is a safe liquid additive designed to control the release of salts from concrete products, greatly increasing their market appeal and durability. ADDICRETE T reacts with soluble salts in the cement-aggregate matrix and prevents them from migrating as soluble salts to the surfaces of finished products. ADDICRETE T also acts as a cement and colour dispersion agent in the concrete wet mix as well as a water reducer. Emminently suitable for limestone aggregate concrete.
Ÿ No unsightly chalking on finished products.· Improved aesthetics, brighter, even colours.· Improved structural integrity of products,
better strength and abrasion resistance.· One product for colour and cement
dispersion and efflorescence control. No other additives needed.
· Minimal cost per mix.· Has the ability to reduce cement in mixes whilst increasing strength and abrasion of finished products.· The ingredient structure of ADDICRETE T adds much increased Ÿ resistance to moulds, algae and bacteria to
the paver
Ÿ Excellent for limestone concrete products.
BENEFITS
80
CEMENT ADD P16 Goongarrie St BAYSWATER,6503 T 9378 2022 E [email protected]
Calmarc Chemicals
CEMENT ADD P is a safe, easy to use powder additive for concrete,
designed to control the release of salts from concrete products,
which greatly increases their market appeal and durability. CEMENT ADD P reacts with soluble salts in the cement-aggregate
matrix and prevents them from migrating as soluble salts to the
surfaces of finished products. CEMENT ADD P also acts as a cement dispersion agent, allowing
for reduced water content in mixes, leading to faster mould turn
around and stronger productConcrete strength and durability are substantially increased
APPLICATIONS
CEMENT ADD P can be used as an additive in the
manufacture of cement masonry products such as
concrete pavers, bricks and blocks. CEMENT ADD P can also be used as an additive for
renders, floats and premix concrete for slabs etc.No
unsightly chalking on finished products.Improved aesthetics, brighter, even colours.Improved structural integrity of products.Minimal cost per mix.
81
DemouldDEMOULD is a water emulsion mould releaseagent for various types of moulding replication. DEMOULD is also used as an anti-stick agent forconcrete truck shoots and areas where cementbuild up occurs.
WWW.CALMARC .COM
Calmarc Chemicals
16 Goongarrie St BAYSWATER WA 6053
T (08) 9378 2022
82
PRODUCT INFORMATION
PRODUCT SAFETY INFORMATION
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL, ENVIRONMENTAL AND HEALTH HAZARD INFORMATION. THE PRODUCT SAFETY DATA SHEET IS AVAILABLE ON REQUEST FROM CALMARC CHEMICALS.
STORAGE
Product should be stored under cover in a suitable ventilated room between 5 and 35°C in original unopened containers. Contact Calmarc Chemicals for shelf life of products.
LIMITATIONS
This product is neither tested nor represented for medical or pharmaceutical uses. Not intended for human injections. Not intended for food use.
LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that our products are safe, effective and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Calmarc Chemicals sole warranty is that our products will meet the sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
CALMARC CHEMICALS SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARICULAR PURPOSE OR MERCHANTABILITY. CALMARC CHEMICALS DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
This is in addition to any rights or remedies you may have as a “consumer” under the Australian Consumer Law and to that extent you need to be aware that: “Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss of damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure.
DISCLAIMER
This information is offered solely for the customer and or specifier for their consideration, investigation and verification. The suggestions mentioned herein should be fully assessed prior to application. No warranty or implied liability is given for any recommendations, advice, suggestions made by Calmarc Chemicals or representatives, agents or distributors for the conditions of use and labour for the products which are beyond our control. Catalogue or specification contents may change form time to time without notice. SDS are available.
Minolta ColourSpectrometer
ANTON PARRVISCOMETER
LOVIBONDCOLOURMETER
Mira Ramon Spectrometer
Analyses liquid or powder
A portion of our laboratory
equipment
(08) 9378 2022
or visit us at16 Goongarrie StBAYSWATER WA 6053
For more information Call us on: