33
Calculation 98-ENG-02405D2, Revision 2 Attachment 8

Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Calculation 98-ENG-02405D2, Revision 2

Attachment 8

Page 2: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PMPe Page I of 32

BWT Dominion-Engineering Technical Evaluation

Cover SheetP, # / a,~ 31 IZ

S. S S *.~ .I

1. Stations Doc Type: Sub Type: 2. Document Number 3. Rev # 4. Decomissioning?[Z MP E] SU 5] NA E] KW [] CO ETE 000 ETE-MP-2012-1135 0 5 Yes f] No

(Note: If both SU and NA. then check CO)

5. Title:Justification for the Table Accuracy Value Used in the MINCo RTD SCA Term in Calculation No. 98-ENG-02405D2.6. ETE Level 7. Unit(s) * 8. Quality Classification 9. FSRC Approval Req.?[] Level El] Level 1 1 El Unit1 Ea Unit2 51 Unit3 l ISFSI El SR [] NS 5 NSQ 5 Yes [Z No

10.. Preparation, Review, and Approval Signatures (add or delete rows as needed)

Preparer : (Print) Signature: Date:Digitally Signed By: . 08/06/2012Nancy Nowlan 12:03:43 pm

Reviewer: (Print) Signature: Date:Digitally Signed By: 08/06/2012Konstantine Filippides - "-,, .-- 01:04:08 pm

Engineering Supervisor / Designee: (Print) Signature: Date:Digitally Signed By: 08/06/2012Keith Deslandes Xý__ z•__ 02:17:27 pm

Standard Attachments Attachment # of pages Reviewed/No Not Req.Impact

11. Design Effects and Considerations (DNES-AA-GN-1003) F-_ _ _*

12. Document Impact Summary (DRUL) (DNES-AA-GN-1002) __ *13. Considerations and Conditions for Document Updates (check N/A F7 if no document updates are noted on the DRUL)

5 All Document updates noted on the DRUL can be initiated immediately

5 Document updates noted on the DRUL are delayed until the following documents/actions are completed:

(e.g., WO, CR etc.) (See DRUL Remarks section)

1OCFR5O.59 Attachments Attachment # of pages Not Req.

14. 1OCFR50.59/72.48 applicability review forms (DNAP-3004 or CM-AA-400) Wk

15. 1OCFR50.59/72.48 screen form (DNAP-3004 or CM-AA-400) I•16. 1 OCFR50.59/72.48 evaluation form (DNAP-3004 or CM-AA-400) I217. Additional Attachments

Attachment # of pages DescriptionMET LAB RTD Cal UncertaintyCalc,, 1MET LAB RTD Cal UncertaintyInforn ICalibrationReport SN 1309.pdf 1CalibrationReport SN 1269.pdf 1CalibrationReport SN 1270.pdf 1MINCoAccuracyStatement.pdf 2SN_1269,_SN 1270 and SN 1309 C2 12

SN 1269 SN_1270 SN 1309_2009_1V 9 1

Aug 6, 2012 3:06 PM

Page 3: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32

1'977X61-111460J7- 9.

Engineering Technical Evaluation

Cover SheetDomninion-

CMA'-T-0 ATTACHMENT .a l2o

18.DDistributionPrimary Recipient(s): (Enter the Name I Dept or Location for EACH Primary Recipient in this block.)

Copy To? Other Recipient / Department or Location Copy To? 1Other Recipient/Department or Location]J Preparer

[]J Reviewer

F] Supervisor

El Site DCE

[] iffected organization

El Program Owners

2.0 Source Document

Calculation No. 98-ENG-02405D2, "Millstone Unit 2 Service Water Inlet Temperature-Indicator Accuracy TI-6928, TI-6929 & TI-6930."

4.0 Purpose

The purpose of this engineering technical evaluation is to provide justification for the MINCo RTD "Table Accuracy" term used withincalculation no. 98-ENG-02405D2. Also, this engineering technical evaluation will contain the calibration tables for the calibrated RTDsTE-6928, TE-6929 and TE-6930.

Aug 6, 2012 3:06 PM

Page 4: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 3 of 32

A) •AcJi/I,/y/ 6Jr- •"

.u•,miionEngineering Technical Evaluation k(6 o r 3-ominion"Cover Sheet

CMAA-T 0 ATTACHMENT .a 3o

7.0 Discussion

TE-6928, TE-6929 and TE-6930 are the Vital AC Switchgear Room Cooling Coil (Xl 81A and X811B) Service Water Inlet RTDs. LoopsT-6928, T-6929 and T-6930 are used in technical specification surveillance SP 2619A, "Control Room Shift Checks," to record and verifythat the "Ultimate Heat Sink" temperature is less than 74.5 degrees F.

TE-6928, TE-6929 and TE-6930 are MINCo. model no. XS7927PKIL76S RTDs, serial nos. S/N 1309, S/N 1270 and S/N 1269,respectively. RTDs S/N 1269 and S/N 1270 were certified by MINCo in 1993 and RTD S/N 1309 was certified by MINCo in 2000.MINCo certified all three RTDs to a stated accuracy value of± 0.025 degrees C (refer to the attached MINCo "Report of Calibrations"and "MINCo Accuracy Statement"). This supported the SCA term used in calculation no. 98-ENG-02405D2, revision no. 0.

A subsequent calibration of these particular serial number RTDs was performed by the Millstone Metrology Lab in 2009. New R vs Ttables were generated and used for the calibration of each of the temperature loops (refer to the attached "SN 1269, SN 1270 and SN 1309Met Lab Calibration Curves"). Information provided by the Millstone Metrology Lab indicates that the standards used by the lab tocalibrate these RTDs is ± 0.0038 degrees C (refer to the attached "Met Lab RTD Cal Uncertainty Cales. And Met Lab RTD CalUncertainty Information). This uncertainty value bounds the A: 0.025 degrees C used in the SCA term in calculation no. 98-ENG-02405D2.

To ensure the Metrology Lab curves approximated those produced by MINCo, this ETE compared the values of the M]NCo curves to theMetrology Lab curves. The original R vs T tables provided by MINCo were not found. However, within MINCo's website, an RTDTable Generator was used to generate the R vs T tables using the coefficients of the original M1NCo RTD calibration reports. UsingEXCEL, R vs T curves were plotted using resistance and temperature values over the 0 to 100 degrees F calibrated span of thesetemperature loops in 5 degrees F increments (21 data points). Again using EXCEL, R vs T curves were plotted using the 2009 MetrologyLab generated tables for these RTDs. The two curves generated for each serial no. RTD were compared. The worst case error noted andexpressed as a percent of span (0 to 100 degrees F span) for S/N 1269, S/N 1270 and S/N 1309 was ± 0.033 % (± 0.033 degrees F), ±0.01 % (- 0.01 degrees F) and ± 0.066 % (± 0.066 degrees F), respectively. As stated earlier, S/N 1269 and S/N 1270 were certified byMINCO 16 years prior to the Metrology Lab calibration and S/N 1309 was certified by MINCo 9 years prior to the Metrology Labcalibraion. For S/N 1269 and S/N 1270, a MINCo stated 16 years drift term "root sum of the square" combined with the MINCorepeatability statement for this model no. RTD equates to ± 0.36 % (0.36 degrees F). For S/N 1309, a MINCo stated 9 years drift term"root sum of the square" combined with the MINCo repeatability statement for this model no. RTD equates to ± 0.27 % (0.27 degreesF). The worst case error in the curves generated by MINCo as compared to the 2009 Metrology Lab calibrations indicates that theseparticular serial no. RTDs did not drift very much over their respective 9 year and 16 year period and certainly much less than expected.

8.0 Conclusions

The ± 0.025 degrees C value used in the SCA term for RTD accuracy in calculation no. 98-ENG-2405D2 is valid. This value is used as"Table Accuracy" in revision no. 2 of this calculation.

Aug 6, 2012 3:06 PM

Page 5: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 4 of 32

A,7r~c/lA1e,~i-r gEngineering Technical Evaluation

Cover Sheet:ý) Fominion-CMA-T-0 ATTCHEN 2 * e4o

12.0 References

All references are attached to this ETE.

1. Calibration Report SN 1269,

2. Calibration Report SN 1270,

3. Calibration Report SN 1309,

4. MET LAB RTD Cal Uncertainty Calcs,

5. MET LAB RTD Cal Uncertainty Information,

6. SN 1269 SN 1270 SN 1309 Met Lab Cal Curves,

7. SN 1269, SN 1270, SN 1309 Calibration Curve Comparisons (EXCEL spreadsheets and charts),

8. MINCo Accuracy Statement.

Aug 6, 2012 3:06 PM

Page 6: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #1 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 5 of 32

,4/7%6/n'n6A"r a5-a- 3 2--

MINCO PRODUCTS, INC. REPORT No. 20137300 COMMERCE LANE JOB No. 03-30932FRIDLEY, MN 55432 P.O.# 259053TELEPHONE: (612) 571-3121FAX: (612) 571-0927

REPORT OF CALIBRATION*** CERTIFICATE **T*

FORPLATINUM RESISTANCE THERMOMETER

MODEL XS7927PKIL76S(B) SERIAL No. 1269PREPARED BY MINCO PRODUCTS, INC.

FOR NORTHEAST NUCLEAR ENERGY CO

THE THERMOMETER RESISTANCE WAS MEASURED AT FIXED TEMPERATUREPOINTS DEFINED BY ITS-90 OR BY COMPARISON WITH A CALIBRATEDPLATINUM RESISTANCE THERMOMETER TRACEABLE TO THE NATIONALINSTITUTE OF STANDARDS AND TECHNOLOGY. RESISTANCES WEREMEASURED WITH AN EXCITATION CURRENT OF 1.OmA.

TEMPERATURE IS DERIVED FROM MEASURED RESISTANCE AS FOLLOWS:

FOR TEMPERATURES BELOW 273.16K:Wref(T) = W(T) - a4*[W(T)-I] - b4*(W(T)-I)lnW(T)

FOR TEMPERATURES AT AND ABOVE 273.16K:Wref(T) = W(T) - a8*[W(T)-I] - b8*[W(T)-I]-2

WHERE W(T) R(T)/R(273.16K), FOR T IN KELVIN;Wref(T) DEFINES TEMPERATURE ACCORDING TO THEITS-90 REFERENCE FUNCTION (SEE FOLLOWING PAGE);AND THE COEFFICIENTS a4, b4, a8, AND b8 AREUNIQUE TO EACH INDIVIDUAL THERMOMETER.

a8 = -4.0758054D-04b8 = +8.3733738D-05a4 = -3.6445181D-04b4 = -2.8576799D-06

R(OC) = 199.872 OHMSR(100C)/R(OC) = 1.3927

MEASUREMENT DATATEMP (-C) RESISTANCE (OHMS)

-189.34 43.2061-38.83 168.742

0.010 199.880100.00 278.358231.928 378.273

MEASUREMENTS BY: D. JACOBSCERTIFIED BY: G. ENGELBRECHT

DATE CERTIFIED: 10 JUNE 1993

N.I.S.T. TEST REPORT No. 811/250375

DATE OF N.I.S.T. TEST: 4 DECEMBER 1992

Page 7: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #2 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 6 of 32

A4 7rACI/,'f C,, '-5-- 6 a

MINCO PRODUCTS, INC. REPORT No. 20147300 COMMERCE LANE JOB No. '03-30932FRIDLEY, MN 55432 P.O.# 259053TELEPHONE: (612) 571-3121FAX: (612) 571-0927

REPORT OF CALIBRATION*** C ERT I F I CATE ** *

FORPLATINUM RESISTANCE THERMOMETER

MODEL XS7927PK1L76S(B) SERIAL No. 1270PREPARED BY MINCO PRODUCTS, INC.

FOR NORTHEAST NUCLEAR ENERGY CO

THE THERMOMETER RESISTANCE WAS MEASURED AT FIXED TEMPERATUREPOINTS DEFINED BY ITS-90 OR BY COMPARISON WITH A CALIBRATEDPLATINUM RESISTANCE THERMOMETER TRACEABLE TO THE NATIONALINSTITUTE OF STANDARDS AND TECHNOLOGY. RESISTANCES WEREMEASURED WITH AN EXCITATION CURRENT OF 1.OmA.

TEMPERATURE IS DERIVED FROM MEASURED RESISTANCE AS FOLLOWS:

FOR TEMPERATURES BELOW 273.16K:Wref(T) = W(T) - a4*[W(T)-I] - b4*[W(T)-I]InW(T)

FOR TEMPERATURES AT AND ABOVE 273.16K:Wref(T) = W(T) - a8*(W(T)-I] - b8*[W(T)-I]^2

WHERE W(T) = R(T)/R(273.16K), FOR T IN KELVIN;Wref(T) DEFINES TEMPERATURE ACCORDING TO THEITS-90 REFERENCE FUNCTION (SEE FOLLOWING PAGE);AND THE COEFFICIENTS a4, b4, a8, AND b8 AREUNIQUE TO EACH INDIVIDUAL THERMOMETER.

a8 = -5.4864581D-04b8 = +1.0006569D-04a4 = -3.3185991D-04b4 = -2.9061316D-06

R(OC) = 199.904 OHMSR(100C)/R(OC) = 1.3926

MEASUREMENT DATATEMP (-C) RESISTANCE (OHMS)

-189.34 43.2079-38.83 168.768

0.010 199.912100.00 278.392231.928 378.311

MEASUREMENTS BY: D. JACOBSCERTIFIED BY: G. ENGELBRECHT

DATE CERTIFIED: 10 JUNE 1993

N.I.S.T. TEST REPORT No. 811/250375DATE OF N.I.S.T. TEST: 4 DECEMBER 1992

Page 8: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #3 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 7 of 32

MINCO Products, Inc. Report No. 33067300 Commerce Lane Job No. 3-254185Fridley, MN 55432 P.O.# 02140472Tel: (612) 571-3121

t FAX: (612) 571-0927

Report of Calibration*** CERTIFICATE ** *

forPlatinum Resistance Thermometer

Model XS7927PKIL76S Serial No. 1309Prepared by MINCO PRODUCTS, INC.for NORTHEAST NUCLEAR ENERGY CO.

The thermometer resistance was measured at fixed temperaturepoints defined by ITS-90 or by comparison with a calibratedPlatinum Resistance Thermometer traceable to the NationalInstitute of Standards and Technology. Resistances weremeasured with an excitation current of 1.0mA.

Temperature is derived from measured resistance as follows:

for temperatures below 273.16K:Wref(T) = W(T) - a4*[W(T)-I] - b4*[W(T)-IjlnW(T)

for temperatures at and above 273.16K:Wref(T) = W(T) - a8*[W(T)-I] - b8*[W(T)-1I]2

1 where W(T) = R(T)/R(273.16K), for T in Kelvin;Wref(T) defines temperature according to theITS-90 reference function (see following page);and the coefficients a4, b4, a8, and b8 areunique to each individual thermometer.

a8 = -4.5088398D-04b8 = +1.4870006D-04a4 = -6.0597493D-04.b4 = +3.1314950D-04

R(0 0 C) = 200.008 ohmsR(100 0 C)/R(00 C) = 1.3927

Measurement dataTemp (OC) Resistance (ohms)-189.34 43.349

-38.83 168.8660.010 200.016

100.00 278.546231.928 378.533

Measurements by: JESCertified by: M. SWENSON

Date certified: 14 July 2000

N.I.S.T. Test Report No. 14-HS876-1-1Date of N.I.S.T. test: 6 May 1999

Page 9: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #4 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 8 of 32

,47YA!&46Ore-~

Hart Thermometry System Accuracies

SPRT + Thermometer UncertaintiesDevice Temperature Accuracy Combined Uncertainty

1590 -200 to 6610C ±0.00150C +0.0025005681 -200to661°C ±0.0020C

Bath UncertaintiesDevice Parameter Tem erature Specification

-40°C ±0.0020C00C ±0.0010C

7037 Stability 250C ±0.00050C±10000 +0.0020C

Uniformity All ±0.0020C

Stability 1000C ±0.0030C6022 3000C ±0.0050C

6022 1000C ±0.0040CUniformity 3000C ±0.0120C

<3000C ±0.0300C9260 Stability >3000C ±0.0500C

Uniformity 50 to 6800C ±0.0200C

Fixed PointFixed Point Cell Temperature Uncertainty5901 D-Q TPW 0.010C ±0.0001 0C

5946 MP Zn 429.5270C ±0.0020C

Combined Uncertainties (Bath + 1590 + 5681)Bath Temperature Combined Uncertainty

-400C ±0.0038°C000C ±0.00340C

250C ±0.00320C

1000C ±0.00380C1000C ±0.00560C3000C ±0.01 320C

9260 <3000C ±0.03610C>3000C +0.05390C

Page 10: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

0=>

SNancy M Nowlan (Generation - 6)

0,

From: Robert J Byrnes (Generation - 4)Sent: Thursday, August 02, 2012 3:26 PMTo: Nancy M Nowlan (Generation - 6)Subject: Accuracy of Data Generated by Metrology Laboratory RTD Calibrations

Nancy,

Measurement uncertainty for all standards used for calibration of RTDs by the Millstone Metrology Laboratory is ±0.0038*C. This excludes the uncertainty of theCallendar Van Dusen equation, which generates the Temperature vs. Resistance table and coefficients. The CVD equation, used to generate the table and

m

coefficients, contributes such an inconsequential uncertainty, that it is not worthy of consideration.The RTD data provided by Minco has an uncertainty of 0.0250 C. The calibrations performed by the Millstone Metrology Laboratory are 6.58 times more accurate.

-P

bob byrnesInstrument Tech Ill C"

Tie Line: 8.759.6229Phone: 860.447.1791 x6229 0Fax: 860.444.5317 0

Pager: 860.504.43650D

"The only stupid question is the one you don't ask." 0

ccO

Page 11: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 10 of 32

-Report for Callendar-Van Dusen Coefficients --,-- .

Model: XS7-927PK ISerial: 1309 t-Da~te-: August 04,2009

Rekfrence (OC)-1 9:9433

0.038025.021150,0 17675.0155

I00.0214

UUT (Ohms)184.0662199.9719219.8137239.5121259.0611278.4672

,5 5-.5 7 C) e7(3Residual (QC)

0.00000.0000

-0.00160.00030.0012

-0.0007

Coefficients:RO = 199.941595ALPHA = 0.00392657DELTA = 1.54203BETA = -9.55746

P'age Iof 3

Page 12: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #8 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 11 of 32

,f,VrCftAlC' ce&r

Model: XS7927PK1 Serial: 1309 Callendar-Van Dusen Temperature vs. Resistance TableOF

-4.00-3.00-2.00-1.000.001.002.003.004.005.006.007.008.009.0010.0011.0012.0013.0014.0015.0016.0017.0018,0019.0020.0021.0022.0023.0024.0025.0026.0027.0028.0029.0030.0031.0032.0033.0034.0035.0036.0037.0038.0039.0040.0041.0042.0043.0044.0045.0046.0047.0048.0049.0050.0051,0052.0063.00

Resistance184.02137184.46076184.90046185.34044185.78069186.22121186.66197187.10296187.54418187.98560188.42723188.86903189.31101189.75315190.19543190.63785191.08040191.52306191,96583192.40868192.85162193.29463193.73770194.18082194.62397195.06716195.51037195.95359196.39682196.84003197.28323197.72640198.16954198.61264199.05569199.49867199.94159200.38444200.82721201.26991201.71253202.15508202.59756203.03995203.48228203.92453204.36670204.80880205.25083205.69278206.13465206.57645207.01818207.45983207.90141208.34291208.78433209.22569

dr/dT OF0.4392383 54.000.4395457 55.000.4398394 56.000.4401196 57.000,4403863 58.000,44063991 59.00

0,4408804 60.000.44110801 61.000.4413230 62.000.4415254 63.000.4417155 64.000.4418934 65.000,4420593 66.000.4422133 67.000.4423557 68.000.4424866 69.000.4426062 70.000.4427146 71.000.4428121 72.000.4428987 73.000.44297471 74.000.4430403 75.000.4430955 76.000.4431406 77.000.44317581 78.000.4432012! 79.000.4432170f 80:000.4432233, 81.000,4432204! 82.000.44320841 83.000.44318751 84.000.44315781 85.000.44311961 86.000.4430729 87.000.4430180 88.000.4429551 89.000.4428843 90.000.4428095 91.000.4427348 92.000.4426601 93.000.4425853 94.000.4425106 95.000.4424359 96.000.44236111 97.000.4422864 98.000,44221171 99.000.44213701 100.000.4420622 101.000.4419875 102.000.4419128 103.000.4418380 104.000.4417633 105.000.4416886 106.000,44161381 107.000.4415391 108.000.44146441 109.000.44138971 110.000.4413149 111.00

Resistance209.66696210.10817210.54929210.99035211.43133211.87223212.31306212.75381213.19449213.63510214.07563214.51608214.95647215.39677215.83700216.27716216.71724217.15725217.59718218.03704218.47682218.91653219.35616219.79572220.23521220.67462221.11395221,55321221.99240222.43151222.87054223.30950223.74839224.18720224.62594225.06460225.50319225.94170226.38014226.81850227.25679227.69500228.13314228,57120229.00919229.44711229.88495230,32271230.76040231.19802231.63556232.07303232.51042232.94774233.38498233.82215234.25924234.69626

dr/dT i OF Resistance0.4412402 112.00 235.133200.44116551 113.00 235.570070.44109071 114.00 236.006860.4410160 115.00 236.443580.44094131 116.00 236.880220.44086651 117.00 237.316790.4407918 118.00 237.753290.4407171 119.00 238.189710.4406424 120.00 238.626050.4405676 121.00 239.062330,4404929 122.00 239.498520.4404182 123.00 239.934640.4403434 124.00 240.370690.4402687 125.00 240.806660.4401940 126.00 241.242560.4401192 127.00 241.678380.4400445 128.00 242.114130.4399698 129.00 242.549800.4398951 130.00 242.985400.4398203 131.00 243.420920.4397456 132.00 243.856370.4396709 133.00 244.291740.4395961 134.00 244.727040.4395214 135.00 245.162270.4394467 ; 136.00 245.597420.4393719 137.00 246.032490.4392972 138.00 246.467490.4392225 139.00 246.902420.43914781 140.00 247.337270,4390730 141.00 247.772050,4389983 142.00 248.206750,4389236 143.00 248.641370.4388488 144.00 249.075920.4387741 145.00 249.510400,4386994 146.00 249.944800.4386246 147.00 250.379130.4385499 148.00 250.813380.4384752 149.00 251.247560.4384005 150.00 251,681670.4383257 151.00 252,115700,4382510 152.00 252.549650.4381763 153.00 252,983530.4381015 154.00 253.417330.4380268 155.00 253.851060.4379521 156.00 254.284720.4378773 157.00 254,718300.4378026 158.00 255.151800.4377279 159.00 255.585240.4376532 160.00 256,018590.4375784 161.00 256,451870.4375037 162.00 256.885080.4374290 163.00 257.318210.4373542 164.00 257.751270.4372795 165.00 258.184250.4372048 166.00 258.617160.4371300 167.00 259.049990.4370553 168.00 259.482750.4369806 169,00 259.91543

drldT0.43690590.43683110,43675640.43668170.43660690.43653220.43645750.43638270.43630800.43623330.43615860.43608380.43600910,43593440,43585960.43578490.43571020.43563540.43556070.43548600.43541130.43533650.43526180.43518710.43511230.43503760.43496290.43488810.43481340.43473870.43466400.43458920,43451450.43443980.43436500.43429030.43421560,43414080,43406610.43399140.43391670.43384190.43376720.43369250.43361770,43354300.43346830.43339350.43331880.43324410.43316940.43309460.43301990.43294520.43287040.43279570.43272100.4326462

Page 2 of 3 Date: August 04,2009

Page 13: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 12 of 32

Model: XS7927PKI Serial: 1309 Callendar-Van Dusen Temperature vs. Resistance TableOF Resistance drldT

170.00 260.34804 0.4325715171.00 260.78058 0.4324968172.00 261.21304 0.4324221173.00 261.64542 0.4323473174.00 262.07773 0.4322726175.00 262.50997 0.4321979176.00 262.94213 0.4321231177.00 263.37421 0.4320484178.00 263.80622 0.4319737179.00 264.23816 0.4318989180.00 264.67002 0.4318242181.00 265.10181 0.4317495182.00 265.53352 0.4316748183.00 265.96516 0.4316000184.00 266.39672 0.4315253.185.00 266.82821 0.4314506*186.00 267.25962 0.4313758!

187.00 267.69096 0,4313011!188.00 268.12222 0.4312264;

189.00 268.55341 0.4311516.190.00 268,98453 0.4310769-191.00 269.41557 0.4310022:192.00 269.84653 0.4309275:193.00 270.27742 0,4308527:194.00 270,70824 0.4307780195.00 271.13898 0.4307033,196.00 271.56964 0.4306285197.00 272.00023 0.4305538198.00 272.43075 0.4304791199.00 272.86119 0.4304044200.00 273.29156 0.4303296201.00 273.72185 0.4302549202.00 274.15207 0.4301802203.00 274.58221 0.4301054204.00 275.01228 0.4300307205.00 275.44227 0.4299560206.00 275.87219 0.4298812207.00 276.30204 0.4298065208.00 276.73181 0.4297318209.00 277.16150 0.4296571210.00 277.59112 0.4295823211.00 278.02066 0.4295076212.00 278.45014 0.4294329

Page 3 of 3 Date: August 04,2009

Page 14: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 13 of 32

,rA(#C e A17- Et

Report No: RU200908073-001Page 1 of 3

Report of Calibration

DominionRope Ferry Road

Bldg 433, Metrology LaboratoryWaterford, CT 06385

Model: XS7927PK1 Customer: DominionSerial: 1270 ' , 1'o Rope Ferry Road

Description: RTD PLANT INSTALLED Bldg 433, Metrology LaboratoryWaterford, CT 06385

Calibration Range: LimitedReceived Condition: Recalibration

Current: 1.0 mAProcedure: MTE 1142E

Actual Value(Reference)

(C)

-19.926700.04100

25.0249050.0159075.01290

100.01760

UUT(Test Sensor)

(Ohms)

183.96920199.93170219.76970239.46400259.01160278.41470

Residuals(C)

0.00000.00000.0005

-0.0003-0.00010.0001

Method ofRealization

COMPCOMPCOMPCOMPCOMPCOMP

'Callendar-Van Dusen Coefficients:

RO = 199.89901ALPHA= 0.00392709

DELTA= 1.53452BETA = -0.12847

Test Equipment

Manufacturer Model Description Serial Number Recall Date

Hart Scientific 1590 Super Thermometer I1 A68350 09/03/2009Hart Scientific 5681 SPRT, 25 ohm 1466 02/25/2010Hart Scientific 7037 Bath, Deep Low-Temp 93046 NCR

Notes: Initial calibration to establish baseline data.

Acceptance Criteria: RO = 199,8000 to 200.2000 ohms

Prerequisitesp/et: Initial: Usage Review Required: Yes __

CR#: 111 - 'inaf Calibration Acceptable: Yes %_ No__

Technician: -17Calibration Date:Recall Date:

Temperature:Humidity:

Customer Order:

08/17/200908/12/202973.OF45%N/A

R61~rerI3 Byrne~:

Approved By: -

This report shahl not be reproduced except in full without written approval ofDondnion.

Page 15: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 14 of 32

A(f1~416-A'r &

08/18/2009 Temperature vs.'-% tance Table Repoi .o : RJ200908073.

F0.001.002.003.004.005.006.007.008.009.0010.0011.0012.0013.0014.0015.0016.0017.0018.0019.0020.0021.0022.0023.0024.0025.0026.0027.0028.0029.0030.0031.0032.0033.0034,0035,0036.0037.0038.0039.0040.0041.0042.0043.0044.0045.0046.0047.0048.0049.0050.0051.0052.0053.0054.0055.00

" 56.0057.0058.00

Resistance185.69151186.13661186.58163187.02658187.47147187.91628188.36102188.80570189.25030189.69482190.13928190,58367191.02798191.47223191.91640192.36050192.80452193.24848193.69236194.13617194.57990195.02357195.46716195,91067196.35412196,79749197.24078197.68401198.12715198.57023199.01323199.45616199.89901200.34179200.78449201.22712201.66968202,11216202.55456202.99690203.43915203.88134204.32345204.76548205,20744205,64933206.09114206.53288206.97454207.41613207.85764208.29908208.74045209.18174209.62295210.06410210.50516210.94616211.38708

dr/dT0.44512920.44505930.44498910.44491880.44484840.44477770.44470690.44463600.44456480.44449360.44442210.44435050.44427880.44420690,44413480.44406260.44399030.44391780.44384520.44377250.44369960.44362660.44355340.44348020.44340680.44333320.44325960,44318590.44311200.44303800.44296390.44288970.44281540.44274100.44266670.44259230.44251800.44244360.44236920.44229490.44222050.44214620.44207180.44199740.44192310.44184870.44177440.44170000.44162560.44155130,44147690.44140260.44132820.44125380.44117950.44110510.44103080.44095640.4408820

666666.6'6676•7.717E7717576777879808t82,83

F59.000.001.002.003.004.005.006.007.008.009.000.001.002.003.004.005.006.007.008.00).000.00t.002.003.00

84.0085.0086.0087.0088.0089.0090.0091.0092.0093.0094.0095.0096.0097.0098.0099.00100.00101.00102.00103.00104.00105.00106.00107.00108.00109.00110.00111.00112.00113.00114.00115.00116.00117.00

Resistance211.82792212.26869212.70939213.15001213.59056214.03103214.47143214.91175215.35200215.79218216.23228216.67231217.11226217.55214217.99194218.43167218.87133219.31091219.75041220.18985220.62920221.06849221,50770221.94683222.38589222.82488223.26379223.70262224.14139224.58008225.01869225.45723225.89569226.33409226.77240227.21064227.64881228.08691228.52493228.96287229.40074229.83854230.27626230.71391231.15148231.58898232.02640232.46375232.90103233.33823233.77536234.21241234.64939235.08629235.52312235.95987236.39656236.83316237.26969

dr/dT0.44080770.44073330.44065900.44058460.44051020.44043590.44036150.44028720.44021280.44013840.44006410.43998970.43991540.43984100.43976660.43969230.43961790.43954360.43946920.43939480.40932050.43924610.43917180,43909740.43902300.43894870.43887430.43880000,43872560.43865120.43857690.43850250.43842820.43835380.43827940.43820510.43813070.43805640.43798200.43790760.43783330.43775890.43768460.43761020.43753580.43746150.43738710.43731280.43723840,43716400.43708970.43701530.43694100.43686660.43679220.43671790.43664350.43656920.4364948

139.00140.00141.00142.00143.00144.00145.00146.00147.00148.00149.00150.00151.00152.00153.00154.00155.00156.00157.00158.00159.00160.00161.00162.00163.00164.00165.00166.00167.00168.00169.00170.00171.00172.00173.00174.00175.00176.00

F118.00

119.00120.00121.00122.00123.00124.00125.00126.00127.00128.00129.00130.00131.00132.00133,00134.00135.00136.00137.00138.00

Resistance237.70615238.14253238.57884239.01508239.45124239.88732240.32334240.75927241.19514241.63092242.06664242.50228242.93784243.37333243.80875244.24409244.67936245.11455245.54967245.98472246.41969246.85458247.28941247.72415248,15883248,59342249.02795249.46240249.89677250.33108250.76530251.19945251.63353252.06754252.50147252.93532253.36910253.80281254.23644254.67000255.10348255.53689255.97022256.40348256.83667257.26978257.70282258.13578258.56867259.00148259.43422259.86689260.29948260.73200261.16444261.59681262.02910262.46132262.89346

-001 Page2of3

dr/dT0.43642040.43634610.43627170.43619740.43612300.43604860.43597430.43589990.43582560.43575120.43567680.43560250.43552810.43545380.43537940.43530500.43523070.43515630.43508200.43500760.43493320.43485890.43478450.43471020.43463580.43456140.43448710.43441270.43433840.43426400.43418960.43411530.43404090.43396660.43389220.43381780.43374350.43366910.43359480.43352040.43344600.43337170.43329730.43322300.43314860.43307420.43299990.43292550.43285120.43277680.43270240.43262810.43255370.4324794

0.43240500.43233060.43225630.43218190.4321076

Page 16: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 816/2012 3:06:09 PM

.,, 70CHW1 SPage 15 of 32

08/18/2009 Temperature vs. RL ,tance Table

F Resistance dr/dT177.00 263.32553 0.4320332178.00 263.75753 0,4319588179.00 264.18945 0.4318845180.00 264.62130 0.4318101181.00 265.05307 0.4317358182.00 265.48477 0.4316614183.00 265.91639 0.4315870184.00 266.34794 0.4315127185.00 266.77942 0.4314383186.00 267.21082 0.4313640187.00 267.64215 0.4312896188.00 268.07340 0.4312152189.00 268.50458 0.4311409190.00 268.93568 0.4310665191.00 269.36671 0.4309922192.00 269.79767 0.4309178193.00 270.22855 0.4308434194.00 270.65935 0.4307691195.00 271.09008 0.4306947196.00 271.52074 0.4306204197.00 271.95133 0.4305460198.00 272.38183 0.4304716199.00 272.81227 0.4303973200.00 273.24263 0.4303229201.00 273.67291 0.4302486202.00 274.10313 0.4301742203.00 274.53326 0.4300998204.00 274.96333 0.4300255205.00 275.39331 0.4299511206.00 275.82323 0.4298768207.00 276.25307 0.4298024208.00 276.68283 0.4297280209.00 277.11252 0.4296537210.00 277.54214 0.4295793211.00 277.97168 0.4295050212.00 278.40115 0.4294306

R.9 0-/1" Pag * of5 Z--Re poi, . o: RJ200908073-001 Page 3 of 3

Page 17: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 16 of 32

ff,4 c:/ Ito a//"o

Report No: RJ200908072-001Page 1 of 3

Report of Calibration

Dominion Nuclear ConnecticutRope Fenry Road

Bldg 433, Metrology LaboratoryWaterford, CT 06385

-31n.,OD-2 76~3aModel: XS7927PK1 Customer: Dominion Nuclear ConnecticutSerial: 1269 6• 730 Rope Ferry Road

Description: RTD PLANT INSTALLED Bldg 433, Metrology LaboratoryWaterford, CT 06385

Calibration Range: LimitedReceived Condition: New

Current: 1.0 mAProcedure: MTE 1142E

Actual Value(Reference)

(C)

-19.926700.04100

25.0248050.0174075.01330

100.01830

UUT(Test Sensor)

(Ohms)

183.91050199.86790219.69950239.38870258.92880278.32550

Residuals(C)

0.00000.00000.0006

-0.00040.00000.0001

Method ofRealization

COMPCOMPCOMPCOMPCOMPCOMP

Callendar-Van Dusen Coefficients:

RO = 199.83522ALPHA = 0,00392705

DELTA'= 1.53631BETA = -0.14945

Test Equipment

Manufacturer Model Description Serial Number Recall Date

Hart Scientific 1590 Super Thermometer II A68350 09/03/2009Hart Scientific 5681 SPRT 1466 02/25/2010Hart Scientific 7037 Bath, Deep Low-Temp 93046 NCR

Notes: Initial calibration to establish baseline data.

Acceptance Criteria: RO = 19 9.8 p 200.2 ohms

Prerequisites rpet: Initial: Usage Review Required: YesCR#: Pinal'Cahbration Acceptable: Yes/x_. No _

Calibration Date:Recall Date:

Temperature:Humidity:

Customer Order:

08/06/200908/01/202973.OF38%53M20707631

Technician:

Approved By:

This report shall not be reproduced except in.fidl without written approval of Dominion Nuclear Connecticut.

Page 18: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 17 of 32

1.-rg.C/Y1IhW7- o'

08/07/2009 Temperature vs. Resihance Table Report ,: RJ200908072-001 Page Z of 3

F0.001.002.003.004.005.006.007.008.009.0010.0011.0012.0013.0014.0015.0016.0017.0018.0019.0020.0021.0022.0023.0024.0025.0026.0027.0028.0029.0030.0031.0032.0033.0034.0035.0036.0037.0038.0039.0040.0041.0042.0043.0044.0045.0046.0047.0048.0049.0050.0051.0052.0053.0054.0055.0056.0057.0058.00

Resistance drldT185.63222 0.4449825186.07716 0.4449132186.52204 0.4448437186.96685 0.4447740187.41159 0.4447041187.85626 0.4446340188.30086 0.4445637188.74539 0.4444932189,18984 0.4444226189.63423 0.4443517190.07855 0.4442807190.52279 0.4442095190.96697 0.4441381191.41107 0.4440666191.85510 0.4439948192.29906 0.4439229192.74295 0.4438509193.18676 0.4437786193.63050 0.4437062194.07417 0.4436337194.51777 0.4435610194.96129 0.4434881195.40475 0.4434151195.84812 0.4433420196.29143 0.4432687196.73466 0.4431952197.17782 0.4431216197.62091 0.4430479.198.06392 0.4429741198.50685 0,4429001198.94972 0.4428260199.39251 0.4427517199.83522 0.4426774200.27786 0,4426030200.72043 0.4425285201.16292 0.4424541201.60533 0.4423797202.04768 0.4423053202.48994 0.4422309202.93214 0.4421564203.37426 0.4420820203.81630 0.4420076204.25827 0.4419332204.70017 0.4418587205.14199 0.4417843205.58374 0.4417099206.02541 0.4416355206.46701 0.4415611206.90853 0.4414866207.34998 0.4414122207.79136 0.4413378208.23266 0.4412634208.67388 0.4411889209,11503 0.4411145209.55611 0.4410401209.99712 0.4409657210.43804 0.4408913210.87890 0.4408168211.31968 0.4407424

F Resistance drldT59.00

60.0061.0062.0063.0064.0065.0066.0067.0068.0069.0070.0071.0072.0073.0074.0075.0076.6077.0078.0079.0080.0081.0082.0083.0084.0085.0086.0087.0088.0089.0090.0091.0092.0093.0094.0095.0096.0097.0098.0099.00100.00101.00102.00103.00104.00105.00106.00107.00108.00109.00110.00111.00112.00113.00114.00115.00116.00117.00

211.76038 0.4406680212.20101 0,4405936212.64157 0.4405191213.08205 0.4404447213.52246 0.4403703213.96279 0.4402959214.40305 0.4402215214.84324 0.4401470215.28334 0.4400726215.72338 0.4399982216.16334 0.4399238216.60323 0.4398493217.04304 0.4397749217.48278 0.4397005217.92244 0.4396261218.36203 0.4395517218.80154 0.4394772219'.24098 0,4394028219.68035 0.4393284220.11964 0.4392540220.55886 0.4391795220.99800 0.4391051221.43707 0.4390307221.87606 0,4389563222.31498 0.4388819222,75383 0.4388074223.19260 0.4387330223,63129 0.4386586224.06991 0.4385842224.50846 0.4385097224.94693 0.4384353225.38533 0,4383609225.82365 0.4382865226.26190 0.4382121226.70008 0.4381376227.13818 0.4380632227.57620 0,4379888228.01416 0.4379144228.45203 0.4378399228.88984 0.4377655229.32756 0.4376911229,76522 0.4376167230,20280 0.4375423230.64030 0.4374678231.07773 0.4373934231.51509 0.4373190231.95237 0.4372446232.38958 0.4371701232.82671 0.4370957233.26377 0.4370213233.70075 0.4369469234.13766 0.4368725234.57450 0.4367980235.01126 0,4367236235.44795 0.4366492235.88456 0.4365748236.32110 0.4365003236.75756 0.4364259237.19395 0.4363515

F Resistance drldT118.00 237.63026 0.4362771

119.00 238.06650 0.4362027120.00 238.50267 0.4361282121.00 238.93876 0.4360538122.00 239.37477 0.4359794123.00 239.81072 0.4359050124.00 240.24658 0.4358305125.00 240,68238 0.4357561126.00 241.11810 0.4356817127.00 241.55374 0.4356073128.00 241.98931 0.4355329129.00 242.42481 0.4354584130.00 242.86023 0.4353840131.00 243.29558 0.4353096132.00 243.73085 0.4352352133.00 244.16605 0.4351607134.00 244.60117 0.4350863135.00 245,03622 0.4350119136.00 245.47119 0.4349375137.00 245.90609 0.4348631138.00 246.34092 0.4347886139.00 246.77567 0.4347142140.00 247.21035 0.4346398141.00 247.64495 0.4345654142.00 248.07948 0.4344909143.00 248.51393 0.4344165144.00 248.94831 0.4343421145.00 249.38262 0.4342677146.00 249.81685 0.4341933147.00 250.25100 0.4341188148.00 *250.68508 0.4340444149.00 251.11909 0.4339700150.00 251.55302 0.4338956151.00 251.98688 0.4338211152.00 252.42067 0.4337467153.00 252.85438 0.4336723154.00 253.28801 0.4335979155.00 253.72157 0.4335235156.00 254.15506 0.4334490157.00 254.58847 0.4333746158.00 255.02181 0.4333002159.00 255.45507 0.4332258160.00 255.88826 0.4331513161.00 256.32137 0.4330769162.00 256.75441 0.4330025163.00 257.18738 0.4329281164.00 257.62027 0.4328537165.00 258.05309 0.4327792166.00 258.48583 0.4327048167.00 258.91849 0.4326304168.00 259.35109 0.4325560169.00 259.78361 0.4324815170.00 260.21605 0.4324071171.00 260.64842 0.4323327172.00 261.08072 0.4322583173.00 261.51294 0.4321839174.00 261.94508 0.4321094175.00 262.37716 0.4320350176.00 262.80915 0.4319606

Page 19: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #6 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM

4 m7- ePage 18 of 32

08/07/2009 Temperature vs. Resx-tance Table.F Resistance drldT

177.00 263.24108 0.4318862178.00 263.67293 0.4318117179.00 264.10470 0.4317373180.00 264.53640 0.4316629181.00 264.96803 0.4315885182.00 265.39958 0.4315141183.00 265.83106 0.4314396184.00 266.26246 0.4313652185.00 266.69379 0.4312908186.00 267.12504 0.4312164187.00 267.55622 0.4311419188.00 267.98732 0.4310675189.00 268.41835 0.4309931190.00 268.84931 0.4309187191.00 269.28019 0.4308443192.00 269.71100 0.4307698193.00 270.14173 0.4306954194.00 270.57239 0.4306210195.00 271.00297 0.4305466196.00 271.43348 0.4304721197.00 271.86392 0.4303977198.00 272.29428 0.4303233199.00 272.72456 0.4302489200.00 273.15477 0.4301745201.00 273.58491 0,4301000202.00 274.01498 0.4300256203.00 274.44496 0.4299512204.00 274.87488 0.4298768205.00 275.30472 0.4298023206.00 275.73448 0.4297279207.00 276.16417 0.4296535208.00 276.59379 0.4295791209.00 277.02333 0.4295047210.00 277.45280 0.4294302211.00 277.88219 0.4293558212.00 278.31151 0.4292814

Report j: RJ200908072-001 Page 3 of 3

Page 20: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #7 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 19 of 32

Sensor Calculator - Resistance table generator 9,'f'466Il /9 6 Page 1 of 1

PJ c~ R WE Search

MINCO Home Products Applications Resources About Us

Table Options Select Element Start Over Interchangeability Quick Calc Gen

Temperature Vs. ResistancePLATINUM: PIA TCR = 3.93e-3

Ro = 199.872

A4 =-0.00036445181 B4 =-2.8576799E-06 A8 =-0.00040758054 B8 = 8.3733738E-05

Values are in OhmsTemp +0 +1 +2 +3 +4 +5 +6 +7 +8 +9

-F0 185.6584186.1035186.548 186.9934187.4383187.8831 188.3278188.772 189.2170189.661.10 190.1059 190.5502190.9945 191.4387 191.882 192.3268192.7708193.2147 193.658 194.10220 194.5459 194.9895195.4330 195.8765 196.3198196.7631197.2063 197.6495 198.092 198.535530 198.9784.199.4213199.8640 200.3067 200.7493 201.1918 201.6343 202.0766 202.5189 202.961140 203.40331203.8454 204.2873 204.72931205.1711 205.612 206.0546206.496 206.9377 207.379250 207.82061208.2619 208.703 209.14431209.585 210.0265 210.467 210.908 211.3491211.789860 212.230 212.6710213.1115213.5520213.9923214.4326214.8728215.312 215.7530216.192970 216.63281217.0727 217.5124 217.9521 218.3917 218.8312219.2707 219.7101 220.1494 220.588680 -1221.02781221.46681221.905 222.3448222.7837223.222 223.6611224.0998224.5383224.9768

1.90 1225.41521225.8536 226.291 _226.7300 227.1681227.6062 228.0442228.4821 228.919 229.3576

Temp +0 +1 +2 +3 +4 +6 +9

100 229.7953 1 1 1

© 2011 Minco, All Rights Reserved Flexible Heaters I Flex Circuits J Sensors I Instruments I Careers I Privacy Policy I

http://www.minco.com/tools/sensorcalc/rtd/display.aspx?action=options 08/06/2012

Page 21: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #7 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 20 of 32

19 1-M1/14ý0i &A17 e

p4wr&z i 01,3--

TEMP F

0

510

15

20

25

30

35

40

45

5055

6065

70

758085

9095

100

ITS-90R (ohms)185.6584

187.8831

190.1059

192.3268

194.5459

196.7631

198.9784

201.1918

203.4033

205.6129

207.8206

210.0265

212.2305

214.4326

216.6328

218.8312

221.0278

223.2224

225.4152

227.6062

229.7953

Met LabR (ohms)

185.63222187.85626190.07855192.29906194.51777196.73466198.94972201.16292203.37426205.58374207.79136209.99712212.20101214.40305216.60323218.80154

220.998223.1926225.38533227.5762229.76522

Serial # 1269

Error(ohms)

0.02618

0.02684

0.02735

0.027740.02813

0.02844

0.02868

0.02888

0.02904

0.02916

0.02924

0.02938

0.02949

0.02955

0.02957

0.02966

0.0298

0.0298

0.02987

0.03

0.03008

Error% Reading

0.01410.01430.01440.01440.01450.01450.01440.01440.01430.01420.01410.01400.01390.01380.01360.01360.01350.01330.01330.01320.0131

Error% Span

0.032

0.032

0.033

0.0330.033

0.033

0.033

0.033

0.032

0.032

0.032

0.032

0.031

0.031

0.031

0.031

0.031

0.030

0.030

0.030

0.030

span 44.1369

Certified by Minco in 1993Met Lab Cal performed in 200916 years between Minco and Met Lab Reports

repeatability Drift

0.01% .05deg C/yr

16 year drift RSS drift & repeatability

0.36 0.3604

Page 22: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

3

Serial # 1269 ITS-90 VS MET LAB

230 -

225 -

miq

220

-a

IZ 215E

210 0C 0D

-ITS TOCaliData0205 -M LAB Cal Data C

200

195

190 .•

0 10 20 30 40 50 60 70 80 90 100

Temperature (Deg F)

CD

0

(-3N)

Page 23: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

3

Serial # 1269 ITS-90 VS MET LAB

0)

.220

219.8

219.6

219.4

219.2

219

218.8

218.6

218.4

218.2

218

•~ITS9!0 Cal Data

-M LAB Cal Data

m--A

CA,

0CD

0

P.

(C,

74 74.2 74.4 74.6 74.8 75

Temperature (Deg F)

75.2 75.4 75.6 75.8 76

QI-V

CDto0(0w

N3

Page 24: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #7 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 23 of 32

,,# jrf9-6'41&A/F fSensor Calculator - Resistance table generator

Sý,.,r CNO\ 1-L-)

Page 1 of 1

Search I

IfMINCO Home Products Applications i Resources i About Us

Table Options Select Element Start Over Interchangeability Quick Calc Gen.

Temperature Vs. ResistancePLATINUM: PIA TCR = 3.93e-3

R0 = 199.904

A4 = -0.00033185991 B4 = -2.9061316E-06 A8 = -0.00054864581 B8 = 0.00010006569

Values are in OhmsTemp +0 +1 +2 +3 +4 +5 +6 +7 +8 +9

oF I0 185.6876186.132 186,577 187,0229187.4679187.9128188.3576188.8023189.2469189.691510 190.1360190.5804 191.0248191.4691 191.9133192.3574 192.8014 193.2454193.6893194.133120 194.576 195.020 195.4642195.9077196.3511196.7945197.237 197.6810198.1242 198.567330 199.0103199.453 199,8960200.3387 200.7813201.2238201.6663202.1087202.5510202.993240 203.4354 203.8774 204.3194 204.7614205.2032205.6450206.086 206.5283 206.9699207.411450 207.8528 208.2941 208.735 4209.1765 209.6176210.0587 210.4996(210.9405211.3813211.822060 212.2627 212.7033 213.1438213.5842214.0246214.4649214,9051215.3452215.7853216.225370 216.6652217.105 217.5448217.9845 218.4241218.863 219.30311219.7425220.1818220.621080 221.060 221.4993,221.9383 222.3773222.8161223.2549223.6936 224.1323 224.5709 225.009490 225.4478 225,8861 •226.3244 226.7626 227.2007 227.63881228.0768 228.5141228.9525 229.3903

Temp +0 +I1 +2 +3 +4 +5 +6 +7 +8 +9Fo

100 1229.8279

© 2011 Minco, All Rights Reserved Flexible Heaters I Flex Circuits I Sensors I Instruments I Careers I Privacy Policy I

http://www.niinco.com/tools/sensorcalc/rtd/display.aspx?action=options 08/06/2012

Page 25: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #7 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM -Page 24 of 32

TEMP F

0

5

1015

20

25

30

35

40

45

50

55

6065

7075

80

85

90

95

100

ITS-90

R (ohms)185.6876

187.9128

190.1360

192.3574

194.5769

196.7945

199.0103

201.2238

203.4354

205.6450

207.8528

210.0587

212.2627

214.4649

216.6652

218.8636

221.0602

223.2549

225.4478

227.6388

229.8279

Met LabR (ohms)

185.69151187.91628190.13928192.36050194.57990196.79749199.01323201.22712203.43915205.64933207.85764210.06410212.26869214.47143216.67231218.87133221.06849223.26379225.45723227.64881229.83854

Serial # 1270

Error(ohms)

-0.00391

-0.00348

-0.00328

-0.0031

-0.003

-0.00299

-0.00293

-0.00332

-0.00375

-0.00433

-0.00484-0.0054

-0.00599

-0.00653

-0.00711

-0.00773

-0.00829

-0.00889

-0.00943

-0.01001

-0.01064

Error

% Reading

-0.0021

-0.0019

-0.0017

-0.0016

-0.0015

-0.0015

-0.0015

-0.0016

-0.0018

-0.0021

-0.0023

-0.0026

-0.0028

-0.0030

-0.0033

-0.0035

-0.0038

-0.0040

-0.0042

-0.0044

-0.0046

Error

% Span

-0.005

-0.004

-0.004

-0.004

-0.003

-0.003

-0.003

-0.004

-0.004

-0.005

-0.005

-0.006

-0.006

-0.007

-0.007

-0.008

-0.008

-0.009

-0.009

-0.010

-0.010

span 44.1403

Certified by Minco in 1993

Met Lab Cal performed in 2009

16 years between Minco and Met Lab Reports

repeatability Drift

0.01% .05deg C/yr

16 year drift RSS drift & repeatability

0.36 0.3604

Page 26: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

C)

CD

Serial # 1270 ITS-90 VS MET LAB

230.0000

225.0000

220.0000

-. 215.0000E

210.0000

205.0000

200.0000

195.0000

190.0000

185.0000

- ITS O Cal Data

M ETLAB Cal Data

M-i

CD

C)C)CD

0:3

0

0)

N

0 10 20 30 40 50

Temperature (Deg F)

60 70 80 90 100

IDC)

0C.)

N)

Page 27: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Serial # 1270 ITS-90 VS MET LAB0

0

0a,U

(0

a)

220.0000

219.8000

219.6000

219.4000

219.2000

219.0000

218.8000

218.6000

218.4000

218.2000

218.0000

Serial # 1270 ITS-90 VS MET LAB

• '- ITS! 10 Cal Data

so- METLAB Cal Data

m-Im

-uN,0

N,

C71

0

0

00

0

00.0

co

N,0

N,

Co00)6CD

*4,

74 74.2 74.4 74.6 74.8 75

Temperature (Deg F)

75.2 75.4 75.6 75.8 76

(D

0

CoN,

Page 28: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #7 ETE-MP-2012-1135 Report Generated on 816/2012 3:06:09 PM Page 27 of 32

Sensor Calculator - Resistance table generator Page 1 of 1/'A166 2 -10--,3Zý

Faý Search~

MINCO Home Products I Applications Resources 1 About Us C

Table Options Select Element Start Over Interchangeability Quick Calc Genej

Temperature Vs. ResistancePLATINUM, PIA TCR = 3.93e-3

Ro = 200.008

A4 =-0.00060597493 B4 = 0.0003131495 AB =-0.00045088398 Ba =0.00014870006

Values are in Ohmsemp +0 +1 +2 +3 +4 +5 +6 +7 +8 +90F •_

0 185.7885186.2337186.6789 187.1241187.5691188.0141188.4590188.9038189.3485189.793210 190.2378190.6823191.1267191.5711192.015 192.459 192.9038193.3478193.7918194.235820 194.6796195.1234195.5671196.0107 196.4543 196.8978 197.3412 197.7845 198.2277 198.670930 199.1140,199.55711200.0000 200.4430.200.8859 201.3287.201.7714 202.2140 202.6566 203.099140 203.5415 203.9839 204.42621204.8684 205.3105 205.7526 206.1945 206.6364 207.0783 207.520050 207.9617 208.40331208.8448 209.28631209.7277 210.1690 210.610 211.0514 211.4924 211.933460 212.3744 212.8152 213.2560213.6967 214.1374 214.5779 215.0184 215.4588 215.8992 216.33970 216.7796217.2197 217.65981218.0997 218.5396 218.9794 219.4192219.8588220.298 220.73780 221.177 221.6168 222.05611222.49532 22.9344 223.3735 223.8125 224.2514 224.6903 225.12990 225.5677 226.0064 226.444 226.8834 227.3218 227.7601 228.198 228.6366 229.0747 229.512

Temp +0 +1 +2 +3 +4 +5 +6 +7 +8 +9

100 1 229.9507 +1 1 171

@ 2011 Minco, All Rights Reserved Flexible Heaters I Flex Circuits I Sensors I Instruments I Careers I Privacy Policy J Sit

http://www.minco.com/tools/sensorcalc/rtd/display.aspx?action-options 08/06/2012

Page 29: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #7 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 28 of 32

J9 6Z8 ot 31.

Serial # 1309

ITS-90 Met Lab Error Error

TEMP F R (ohms) R (ohms) Error(ohms) % Reading % Span

0 185.7885 185.78069 0.00781 0.0042 0.010

5 188.0141 187.98560 0.0285 0.0152 0.034

10 190.2378 190.19543 0.04237 0.0223 0.050

15 192.4596 192.40868 0.05092 0.0265 0.060

20 194.6796 194.62397 0.05563 0.0286 0.065

25 196.8978 196.84003 0.05777 0.0293 0.066

30 199.1140 199.05569 0.05831 0.0293 0.06635 201.3287 201.26991 0.05879 0.0292 0.066

40 203.5415 203.48228 0.05922 0.0291 0.066

45 205.7526 205.69278 0.05982 0.0291 0.066

50 207.9617 207.90141 0.06029 0.0290 0.066

55 210.1690 210.10817 0.06083 0.0289 0.066

60 212.3744 212.31306 0.06134 0.0289 0.065

65 214.5779 214.51608 0.06182 0.0288 0.065

70 216.7796 216.71724 0.06236 0.0288 0.06575 218.9794 218.91653 0.06287 0.0287 0.065

80 221.1774 221.11395 0.06345 0.0287 0.065

85 223.3735 223.30950 0.064 0.0287 0.065

90 225.5677 225.50319 0.06451 0.0286 0.065

95 227.7601 227.69500 0.0651 0.0286 0.065100 229.9507 229.88495 0.06575 0.0286 0.065

span 44.1622

Certified by Minco in 2000

Met Lab Cal performed in 200916 years between Minco and Met Lab Reports

repeatability Drift 9 year drift RSS drift & repeatability

0.01% .05deg C/yr 0.27 0.2706

Page 30: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

0

:7

230.0000

225.0000

220.0000

215.0000E

0

210.0000

cz 205.0000

200.0000

195.0000

190.0000

185-0000

Serial # 1309 ITS-90 VS MET LAB

-ITS 0 Cal Data

=ME" LAB Cal Data

CD-t

,m

0G)Co

MCD

0

0C.0L

0 10 20 .30 40 50

Temperature (Deg F)

60 70 80 90 100

"0(0

0

Page 31: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

0

3

Serial # 1309 ITS-90 VS MET LAB

220.0000

219.8000

219.6000

219.4000

2.o 219.2000U

S219.0000

218.8000

218.6000

218.4000

- MT "0 Cal Data

________ ~~~~~~~ ~ ~ IVE _________ ________ ____~~LAB CalI Data

0

0b

0

C-5)

A

218.2000

218.0000 -1- I + I +

74 74.2 74.4 74.6 74.8 75 75.2 75.4 75.6 75.8 76

Temperature (Deg F)

(.0

0

Page 32: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

0

CDNancy M Nowlan (Generation - 6)

From: Anderson, Tereasa [[email protected]]Sent: Monday, July 30, 2012 6:25 PMTo: Gus J Filippides (Generation - 6)Cc: Nancy M Nowlan (Generation - 6)Subject: Calibrated info reference REQ acc rating to old PO# 932995, Gus from DOM!Attachments: TS102(N)_L-6.pdf; S7927.pdf

Gus,I just now got it from engineering."Somewhere, I seem to have missed the original request for a 0.025°C accuracy guarantee. I have attached an old catalog page that describes the different _•

mcalibration tables, and their associated accuracy. Please note that their probe model (57927) is not listed in this table (it had already been discontinued whenT

the catalog was published). However, calibration table RT01 is listed as being accurate to +/-0.025°C. I have also attached the S7927 specification drawingthat provides repeatability and stability for this model.

You may notice that the model number listed on the calibration certs is "XS7927PK ". The "X" prefix designates an alteration of some sort from the standard-- :;0

design. In this case, "X" stands for a 200-ohm platinum element. That does not affect table calibration accuracy, nor repeatability, nor stability."

CDThank you!

Tereasa Anderson I Customer Service Representative I Minco ProductsTel: 763.586.2920 I Fax: 763-571-0927 [email protected] 07300 Commerce Lane I Minneapolis, MN 55432

wwW .rn nc0, cornco

From: Gus J Filippides [mailto:[email protected]]Sent: Monday, July 30, 2012 10:28 AMTo: Anderson, TereasaCc: Nancy M NowlanSubject: FW: Calibrated info reference to old PO# 932995, Gus from DOM!

Hello Tereasa,Did you get a response to my follow up question that I sent last week. The calibration reports do not cite any acceptance criteria for the RTDs, ie 0.025 degrees F

uncertainty.What is the accuracy of the RTDs in question that were supplied to us?

CD

1 0C.,

Page 33: Calculation 98-ENG-02405D2, Revision 2 Attachment 8ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 2 of 32 1'977X61-111460J7- 9. Engineering Technical Evaluation Domninion-Cover

Attachment #8 ETE-MP-2012-1135 Report Generated on 8/6/2012 3:06:09 PM Page 32 of 32

Ref&nc~1Thiiriieters

CalibrationMinco's fully equipped standards labcan calibrate and furnish Individualtables for any thermometer in thisbulletin. All temperatures are basedon ITS-90. There are two types ofcalibration:

Fixed point calibrations

furnishes the actual fixed point val-ues and the resulting coefficients.

Comparison calibrationsUsed for oil filled thermometers,comparison calibrations match thethermometer to be measured againstan NIST traceable standard, ratherthan fixed points.

Absolute vs ratio tables

reads 1.77328 at 2001C. A ratio likethis tends to remain more stable overtime than an absolute resistance.You can periodically recheck Rooc inan ice bath and use the latest valuefor ratio calculation.

RTD calculations

These calibrations use measurementstaken at points derived from physicalconstants, such as the triple point ofwater or the freezing point of tin.The observed values are used to cal-culate coefficients for the interpolat-ing equations of ITS-90. In additionto the comniete R vs T table. Minco

Tables may list either absolute resis-tance values (RT vs T) or resistanceratios (R-t/Ro vs T) indexed to 1. Forexample, if the absolute values of athermometer are 177.47 Q at 200 0Cand 100.08 9 at 01C, the ratio table

Minco offers two options to createand print RTD tables. You candownload the DOS PC program"RTD Cailc" for use on your com-puter. We also offer "SensorCalc", anon-line tool for creating, printing andsaving RTD tables. Both are availableat www mincn.com/support.

Thermometer model (accuracy specifications may vary for other models)

S9688-S9691 S7924,S7928 $7929 S9762 S1059 S7932-S7933 S79253

Type of calibration Fixed point Fixed point Fixed point Fixed point Comparison Fixed point

-189 to -189to -189 to -269 to -189 to -189 toTemperature range 500oM 500OC 660o0 260°0 2600C -100 to 25000 64000

Ordering number for tables

RT vs T, 10C Increments RT05 RT05 RT16 RT01 RT09 RT12

ir/R0 vs T, 10C Increments RT06 RT06 RT17 RT02 RTlO RT13

RT vs T, O.10C Increments RT07 RT18 RT11 1 RT03 RT14

Rr/Ro vs T, 0.1 *C Increments RT08 RT19 RT04 RTI5

Table accuracy ±0.0250C ±0,02500 ±0.0250C ±0.025 ±0.0250C ±0.03500 ±0.0250C

Data points supplied-268.95*C (4.2K): BP helium*

-189.340C : TP of argon2

-50"C, -25°C, 175"*3

-38.830C : TP of mercury2 __•_•

0.01°C :Triple Point of water .

100'C: BP water2 _ _ _

231.928°C : FP tin .....

419.5270C: FP zinc

660.323°C : FP aluminum (+0.05-0)1 Cryogenic calibrations available on special order. 2 Comparison calibration measurement.

3 S7924, S7925 calibrations based on IEC 751, not ITS-90

The Minco strain-free elementMinco precision thermometers rely on a unique element de-sign for superior precision. It consists of a helical coil of plati-num wire, spiraled onto a grooved ceramic bobbin. This con-struction gives more support to the coils than "birdcage"designs, but does not stress the element during thermal ex-pansion. The result is stable and repeatable measurementsunder a variety of conditions.

Page L-6 Mmcv Sales: 1-763-571-3121 Fax: 1-763-571-0927 Web: www.minoo.com Bulletin TS-102Page L-6 Minco Sales: 1-763-571-3121 Fax. 1-763-571-0927 Web: www.minco.com Bulletin TS-102