Caesar Business Faria Lima, São Paulo SP - Brazil May 19-21, 2014esss.com.br/events/ansys2014/brazil/pdf/UGM2014_Brazil_preliminary... · in Computer Aided Engineering (CAE) and

2014 ESSS CONFERENCE & ANSYS USERS MEETINGCaesar Business Faria Lima, São Paulo SP - BrazilMay 19-21, 2014

PRELIMINARY PROGRAM

Organization:

Sponsors:

Academic Challenge Support:

ArgentinaBuenos Aires

May, 14

PeruLima

May, 14-15

ChileSantiago

May, 16

BrasilSão PauloMay, 19-21

ColombiaBogotá

May, 12-13

WELCOME

REGISTRATION

The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America.

During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software update, plenary sessions, free workshops, user technical presentations, and ask the expert sessions.

Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time.

THE EVENT

• Pre-Conference Training Courses

• Plenary Keynote Speakers

• Software Update

• Free Workshops

• 80+ User Technical Presentations

• Ask the Expert

• Academic Challenge

www.esss.com.br/usersmeeting

http://www.esss.com.br/events/ansys2014/brazil/inscricao

http://www.esss.com.br/events/ansys2014/

8:00 REGISTRATION OPEN

8:30 TRAINING COURSES

10:00 REFRESHMENTS IN EXHIBITION AREA


12:00 LUNCH




17:30 END OF 1st DAY

uu May 19

CONFERENCE AT-A-GLANCEuu May 20 uu May 21


8:30 FREE WORKSHOPS

9:30 SOFTWARE UPDATE


11:00 OPENING SESSION11:10 PLENARY SESSION

12:50 LUNCH

14:30 TECHNICAL SESSIONS

17:20 ASK THE EXPERT

17:50 CONFERENCE SOCIAL (COCKTAIL)


8:30 FREE WORKSHOPS

9:30 SOFTWARE UPDATE


11:00 PLENARY SESSION

12:30 ESSS ACADEMIC CHALLENGE AWARD

12:50 LUNCH

14:30 TECHNICAL SESSIONS

17:20 ASK THE EXPERT

17:50 CLOSING SESSION (EACH ROOM)

2014 ESSS CONFERENCE & ANSYS USERS MEETING


SOUTH AMERICA REGIONAL SERIES IN NUMBERS

ColombiaBogotá

May 12-13

ArgentinaBuenos Aires

May 14

PeruLima

May 14-15

ChileSantiagoMay 16

BrazilSão PauloMay 19-21

TECHNICAL PAPERS 18 18 18 18 86

COMPANIES ATTENDANCE 20 25 20 25 60

UNIVERSITIES / R&D CENTERS ATTENDANCE 15 15 10 10 30

EXPECTED NUMBER OF ATTENDEES 75 100 70 100 300

The South America Regional Series will be held in Brazil, Argentina, Chile, Peru and Colombia. At the end of this conference series, more than 150 companies, universities, and R&D Centers will present a total of 150 user technical papers to approximately 600 attendees in South America.

www.esss.com.br/usersmeeting



TRAINING COURSES

VenueRoom

CAESAR BUSINESS FARIA LIMAFARIA LIMA 3

CAESAR BUSINESS FARIA LIMAFARIA LIMA 4

CAESAR BUSINESS FARIA LIMASÃO PAULO 5


8:30 - 17:30

Structural Simulation with ANSYS 15.0 - New Features and Integration Workbench-APDL Contents:

1. New Contact Features;2. Bolt Joint Contact;3. Contact Debonding and Interface Delamination

for Composites;4. Shell-to-Solid Submodeling;5. Mesh Import in ANSYS Workbench;6. Model Assembly;7. APDL Programming Features in Workbench

Interface.

Instructor: Roberto Silva, ESSSSchedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

Composite Materials Modeling using ANSYS Mechanical 15.0 and ACP

Contents: 1. Composite Introduction;2. ANSYS Composite PrepPost Workflow;3. ANSYS Composite PrepPost Integration

in ANSYS Workbench;4. Rosettes;5. The Oriented Element Sets;6. Draping;7. Solid Modeling;8. Parameters in ANSYS Composite PrepPost;9. Failure Criteria;10. Progressive Failure and Crack Growth Analyses.

Instructor: Eduardo Francisco Rocha de Araujo, ESSSSchedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

Turbomachinery Flow Modeling using ANSYS CFX 15.0

Contents: 1. Modelling Single Frame of Reference (SFR);2. Modelling Multiple Frames of Reference (MFR);3. Pre-processing using ANSYS Turbo-Pre;4. Advanced modelling for transient turbomachinery

simulations;5. Post-processing using ANSYS Turbo-Post.

Instructor: Bruno Contessi, ESSSSchedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

Combustion Modeling using ANSYS FLUENT 15.0

Contents: 1. Gas Combustion,;2. Detailed Chemistry;3. Surface Chemistry;4. Pollutant Formation;5. DPM, Spray, Solid Combustion6. LES/Gas Turbine Applications.

Instructor: Stefano Orsino, ANSYS, Inc.Schedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).


TRAINING COURSES

VenueRoom

ESSS SP1

ESSS SP2


8:30 - 17:30

Electromagnetic Analysis of Electronic Products: Advanced Topics Contents:

1. Introduction to the concept of full wave electromagnetic analysis;

2. Importing MCAD geometries;3. Boundaries and excitations setup for RF

applications;4. Electromagnetic extraction;5. How to create near and far field plots;6. Electric and magnetic fields plot; 7. Comparison between simulation and

measurements from local customers;8. Beam scanning antenna simulation;9. Optimization of the beam scanning antenna

to comply with Anatel Resolution 610;10. Design and optimization of an impedance match

circuit for a dipole antenna;11. Signal integrity analysis of serial channels of

a print circuit board;12. Near field, EMI and radiated emissions from

a print circuit board.

Instructor: Juliano Fujioka Mologni, ESSSSchedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

Electromagnetic Analysis of Electrical Machines: Advanced Topics

Contents:

• LF ANSYS tools review;• Rotating electrical machines cases;• Electrical transformers cases.

Instructor: Scott Stanton, ANSYS, Inc.Schedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

Assessing Design Robustness and Reliability using Optimization Techniques

Contents: 1. Introduction:

• What is a robust design?• Statistical Moments;• Probability density function and Cumulative

distribution function. 2. Sampling Methodologies and Polynomial Chaos:

• Monte Carlo Random sampling;• Latin Hypercube sampling;• Polynomial Chaos.;

3. Robust Design Optimization: • Expected value vs Uncertainty;• Dominance Criteria and Pareto Design;• Reverse Multi-Objective Robust Design

Optimization;• Hands on Example.

4. Reliability-Based Optimization: • Reliability Introduction;• Percentil estimation based on Polynomial

Chaos;• Hands on Examples;

Instructor: Guilherme Jenovencio, ESSSSchedule: May 19Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).


Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 78:30 - 9:00

FEA: Workbench 15.0 Bolt Modeling

Instructor: Fabiano Nunes, ESSS

CFD: Pre-Processing using Space Claim

Instructor: Leon White Nogueira, ESSS

EMAG HF: Design of a Beam Scanning Antenna to comply with ANATEL Resolution 610/2013

Instructor: Juliano Fujioka Mologni, ESSS

EMAG LF: Harmonic Stress Modeling and Acoustic Noise in ELectric Motors

Instructor: Anderson Nunes, ESSS

modeFrontier: Making web-based optimization real

Instructor: Matteo Nicolich, Esteco

9:00 - 9:30

FEA: What´s new related to Fracture Mechanics in Workbench 15

Instructor: Eduardo Araújo, ESSS

RBF Morph: a simple set-up for complex workflows, how to

Instructor: Corrado Groth, RBF Morph

EMAG HF: New Features of HFSS 2014

Instructor: Juliano Fujioka Mologni, ESSS

EMAG LF: New Features of Maxwell 2014

Instructor: Anderson Nunes, ESSS

uu May 20

FREE WORKSHOPS

Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 78:30 - 9:00

FEA: Beam Elements Analysis

Instructor: Thiago Lopes, ESSS

CFD: Combustion Modeling: Finite-Rate x LFM ApproachesInstructor: Raphael David Bachi, ESSS

ANSYS Free ACT: Based Customizations

Instructor: Luiz Lima, ESSS

SpaceClaim: Create Clean Geometry for Analysis from Structural Optimization Outputs

Instructor: Roman Walsh, SpaceClaim

VCollab: Reduce, Visualize, Mine & Share ANSYS DataInstructor: Prasad Mandava, VCollab

9:00 - 9:30

FEA: WorkBench 15.0 - Workflow Enhancements

Instructor: Roberto Silva, ESSS

uu May 21


SOFTWARE UPDATE

Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 7

9:30 - 10:30

ANSYS Structural Update

Tim Pawlak ANSYS, Inc.

ANSYS Fluid Update

Stefano Orsino ANSYS, Inc.

ANSYS Electromagnetics Update

Scott Stanton ANSYS, Inc.

modeFRONTIER Update and ESTECO Enterprise Solutions

Matteo Nicolich ESTECO

uu May 20

Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7

9:30 - 10:30

ANSYS Workbench Update

Tim Pawlak ANSYS, Inc.

Reaction Design

William Kuykendall ANSYS, Inc.

Esterel: Embedded Systems and Software Engineering with Complete Virtual Prototyping

Tony Karam ESTEREL-Technologies

Rocky

Nicolas Spogis ESSS

Ensight - FEA & CFD Post-processing

Martin Faber CEI

uu May 21

PLENARY SESSION

Room FARIA LIMA 2

OPENING SESSIONClovis Maliska Jr. - ESSSPresident

Ravi Kumar - ANSYS, Inc. Regional Sales Director

Alvaro Toubes Prata - Ministério da Ciência, Tecnologia e Inovação MCTINational Secretary of Technological Development and Innovation

Room FARIA LIMA 2

Pablo Filgueira Rodeiro - Whirlpool S.A.Global Manager, Simulation Based Design

Johannes Will - DYNARDO GmbHManaging Director

uu May 20 uu May 21



Room SÃO PAULO 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 SÃO PAULO 8 SÃO PAULO 9Chairman Germano Gavarrão Fabiano Diesel Karoline Ropelato Fabio Kurokawa Giuseppe Mirlisenna Juliano Mologni14:30 A Procedure to Integrate AQWA with

FriendShip for the Application of Optimization Techniques in PSV Vessels DesignMiguel Altimari Perdigão Pelia - POLI-USP

Use of FEA to Improve the Design of Suspension Springs for Reciprocating Compressor Mattias Castro - Embraco S.A.

A Methodology for Determining the Rotordynamics Coefficients of a Hybrid Seal by CFDLetícia de Rezende Tapajoz - PETROBRAS

FSI - Special Impeller for AgitatorsAlexandre Sampaio - Semco

Verifying the Influence of Modifying the Geometry Parameters in a Typical Pump’s Impeller from an ESP SystemAna Carla Costa Andrade - Universidade Federal RN

Reconfigurable Resonator for RFID Chipless TagAndreia Ap. de Castro Alves - UNICAMP

14:50 Hydrodynamics of the Flow Around an Underwater Pipeline with the Use of CFDDiener Volpin Ribeiro Fontoura - UNICAMP

Investigation of the Discharge Port Position of Hermetic CompressorsJonatas Ferreira Lacerda - TPC

Effect of Nozzles Design and Configuration on Catalyst and Gas Homegenization in FCC RiserDaniel Cicero Pelissari - UNICAMP/PETROBRAS

Fluid Structure Analysis in Fuel Storage TanksIvan Thesi - ESSS

Analysis of Stresses and Strains in a Disk of Steam Turbine using ANSYSJonas Pedro Caumo - TGM Turbinas

Optically Controlled Adaptive Antenna for ISM bands and Tri-band Slotted Waveguide Antenna Array for Millimetric-waves ApplicationsIgor Feliciano Costa - Inatel / UNIFEI

15:10 A Numerical Study of Towing Tank Resistance Hydrodynamic Experiments for Submerged BodiesJoão Lucas Dozzi Dantas - IPT

Taking Advantage of DesignXplorer in Ideation StageCassiano Antunes Cezario - WEG

Experimental and Numerical vortex Induced Vibration Analysis in a Horizontal PipePatrick Farias - FMC

ANSYS Mechanical Coupling Control in FSI Simulations to Reduce Computational TimeTadeu Tonheiro Rodrigues - Embraco S.A.

Development of a Semi-Axial Pump through CFDIsmael Nicholas Schröer - Higra

Multi-scale based electric drive system simulation Lucas Kostetzer - ESSS

15:30 CFD Water on Deck Simulations for FPSOsDaniel Fonseca - PETROBRAS

Numerical Evaluation for Channel Position in a Helical Oil Pump Applied on Reciprocating CompressorsMauricio Pereira Tada - Embraco S.A.

Multiphase Simulation of a Pumping ModuleBruno Alexandre Contessi - ESSS

FSI analysis of plate heat exchangersLetícia de Rezende Tapajoz - PETROBRAS

CFD Modeling of a Stirred Tank Heated by Helical Coils to Obtain the Nusselt EquationRonald Jaimes Prada - UNICAMP

Analysis of the Electric Field in the Vicinity of a Metal Vacuum Dielectric Triple Junction by the Use of the Software MAXWELL-ANSYS Guilherme Mauad Sant Anna - UNICAMP

15:50 REFRESHMENTS IN EXHIBITION AREAChairman Armando Souza Roberto Silva Daniel Boniatti Luiz Lima Eduardo Araújo Ricardo Barros16:20 Preliminary Structural Analysis of the

Brazilian 14-X Hypersonic Waverider Unpowered Scramjet at Mach Number 10Paulo Gilberto de Paula Toro - Instituto de Estudos Avançados - CTA

Explicit Simulations of Ceramic Materials With Ballistic ApplicationsGuilherme Pinto Guimarães - CTEx

Pre-certification of ROPS for Agricultural Tractors through CAE TechnologyIgor Saveljevas Rodrigues - VirtualCAE

Thermoviscoelastic Model with Ageing for Mass ConcreteFlavio Mamede - Furnas

Crack Propagation Simulation by ANSYS Under Constant Amplitude Loading and Correlation with Experimental DataLuiz Carlos H. Ricardo - Ipen

Particle Deposition During Breath Holding and Exhalation Using Computational Fluid Dynamics (CFD)Liliana de Luca Xavier Augusto - UFSCar

16:40 Complete Avionics System SimulationTony Karam - Esterel-Technologies

The GTN Damage Model Application on Mechanical Conformation ProcessEduardo Luís Gaertner - Embraco S.A.

Numerical and Experimental Study of Constitutive Models for Plasticity Representation in Cases with Statics LoadsRóbinson João Jabuonski Júnior - Stara S.A.

Finite Element Analysis for Structural Reinforcement in Concrete Railway BridgesCarlos Alberto Medeiros - UMC

Effect of Nonmetalic Inclusion in the Fatigue Strength of Helical Spring WireRinaldo Puff - Embraco S.A.

Fluid Structure Interaction Analysis in Abdominal Aortic AneurysmAntonio Braulio Neto - POLI-USP

17:00 Supporting ANSYS Workbench with Valid and Traceable Materials Property ModelsGustavo Olivella - Granta Design

DOP Ballistic Investigations with Explicit AnalyzesGuilherme Pinto Guimarães - CTEx

Topology Optimization Method Considering a Consistent Manufacturing Constraints using ANSYSLeandro Garbin - VirtualCAE

Monitoring and 3D Thermal Modeling of the Spiral Casing of Batalha Hydroeletric Power Plant since its Early Ages Flavio Mamede - Furnas

Distortions Caused by the Welding Process: Comparative Evaluation Using Finite Element Analysis and Experimental AssessmentRafael Vetturazzi - ESSS

Hunting Hot Spots on a Hearing Aid low Power ProjectPaulo Roberto Bueno de Carvalho - Design House -LSITEC

17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert

uu May 20

USER TECHNICAL SESSIONS


USER TECHNICAL SESSIONS

uu May 21

Room SÃO PAULO 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 SÃO PAULO 8 SÃO PAULO 9Chairman Ismael Daoud Bruno Contessi Carlos Fontes Roberto Silva Silvio Alano Cesareo Siqueira14:30 A Response Surface Model to Predict

Flammable Gas Cloud Volume in Offshore ModulesTatiele Dalfior Ferreira - UNICAMP

Thermal-Mechanical Analysis for the new Brazilian Synchrotron Light Source (Sirius) using ANSYS Workbench® Thiago Mendes da Rocha - Lab. Nacional de Luz Sincrotron

Bagasse Swirl Burner Design Explained by CFDDaniel José de Oliveira Ferreira - USP

Fitness for Service Assessment of a Storage TankHervandil Santanna - PETROBRAS

Structural Behavior of a Semi-Trailer Chassis Subjected to Lateral and Vertical Dynamic ManeuversLeandro Garbin - VirtualCAE

Imperfections’ Influence in the Structural Resistance of SubmarinesThiago Pontin Tancredi - USP

14:50 Basic Engineering Design of Flares on oil Plataforms Using Computational Fluid DynamicsMauro Cresta de Barros Dolinsky - PETROBRAS/CENPES

Applying ANSYS/Fluent in the Teaching of Natural ConvectionThiago Antonini Alves - UTFPR

Development of Methodology for Fluid Dynamics and Heat Transfer Study in a Spray Wash Section of Coker FractionatorMariana Dantas - PETROBRAS/ESSS

Internal Sealing Performance of a Hydrotreating High Pressure Heat ExchangerRafael Pavan Bagagli - PETROBRAS

An improvement study of the ejector panel for the 2013 garbageFábio Carlos Cavalcanti - Librelato Implementos Rodoviários S/A

Finite Element Analysis Parameterization - Structural Analysis of ReelsMario Augusto Castro - Technip Brasil

15:10 CFD Modelling on Gas Dispersion for Developing Response CurvesCarolina Marion de Godoy - UNICAMP

Computational Simulation of a Bag House Filter for Steel IndustryClarissa Fonte - ESSS

Use of Computacional Fluid Dynamics in the Study of Gas Holdup in Bubbles ColumnValverde Ramirez Maribel - UFSCar

Flanges Stiffness Determination on Prestressed Bolted Connections and its Validation by Finite Element AnalysisCarlos Eduardo Ribeiro de Camargo Nogueira - USP

Structural Analysis of the a Semi Trailer chassis submitted to Dynamic LoadsJoel Boaretto - Guerra S/A

Numerical Evaluation of the Effective width in Structures Built by Plates with Orthogonal Stiffeners: Comparison with Analytical Solutions Bruno Pegoraro - USP

15:30 Hazardous Area Evaluation Performed Using ANSYS/CFX Tales Costa - Safetyeng Projetos e Consultoria Ltda

Numerical Solution of Natural Convection and Radiation in an Open Cavity Containing a Heterogeneous MediumAlan Lugarini de Souza - UTFPR

CFD Analysis of a Distillation Sieve Tray of the Ethanol IndustryGladson de Oliveira - UFSCar

Analysis of Repairs in Metal-Composite in the Oil Industry Carlos Eduardo Reuther de Siqueira - PETROBRAS

Simplification of Tridem Suspension for Transient Analysis of Trailer ChassisVinicius de Almeida Lima - VirtualCAE

Impact Evaluation of a Transport Barge on a Sluice Wall Ivan Thesi - ESSS

15:50 REFRESHMENTS IN EXHIBITION AREAChairman Nicolas Spogis Daniel Boniatti Armando Souza Eduardo Araújo Rodrigo Ferraz Fabio Kurokawa16:20 New Hopper System for Re-Screening

PlantUeld da Nóbrega - Vale

Study about the Different Positions of the Suction Tube in Alternative Hermetic CompressorsDaniel Lacerda de Andrade - Embraco S.A.

Comparison between Commercial and Free Numerical Codes in Simulations of Coal Combustion in Fluidized Beds: Fluent vs MfixCleiton Elsner da Fonseca - Unisinos

Computer Simulation Analysis of Material used in Compressed Air TankLeonardo Camilo dos Reis - USIMINAS

Hydrodynamic Shape Optimization of Semisubmersibles with Seakeeping Criteria Evaluated with Neural Network Response SurfaceFelipe Carvalho dos Santos - POLI-USP

Preliminary Numerical Simulation of the Brazilian 14-X B Hypersonic Scramjet at Mach Number 7Paulo Gilberto de Paula Toro - Instituto de Estudos Avançados - CTA

16:40 Granular Flow of Particles Submitted to Pressurized Air InjectionMarcelo José Alba - Universidade Tecnológica Federal - PR

Using the Extension Library (ACT) to Perform a Modal Optimization in the Workbench EnvironmentMarcelo Verardi - WEG

Numerical Evaluation of Natural Convection in Evacuated Tube Solar CollectorTiago Francisco Manea - UFRGS

Introducing Residual Stresses in FEM though INISTATE CommandPaulo Rogério Franquetto - CT da Marinha em São Paulo

Wind Power Unit Collaborative Multidisciplinary Optimization at AirworksMatteo Nicolich - ESTECO

Numerical Investigation to Identify Modal Parameters Considering Fiber Orientation of Flexible Composite Wing ModelsEduardo Francisco Rocha de Araujo - ESSS

17:00 Analysis of the Structure of a Conveyor Belt to Determine the Root Cause of its Failure with the Use of Computer SimulationLuiz Otavio Rocha Peres - Usiminas

Simulation of a Novel Assisted Toolholder for Precision MachiningLaercio Junior - UTFPR-PG

Numerical Simulation to Study the Vortices Formation in Water Intakes at HydroelectricsSérgio Leonardo Neves - Unisinos

Modeling of Heat Source Welding with Multiple Pass and Evaluation of Thermal Behavior Thiago Lopes - ESSS

A procedure to Automatic Design of Structures using ANSYS APDL Coupled with modeFrontierBruno Pegoraro - USP

Structural Analysis and Experimental Investigation of the polymer 14-X B inlet model at the T2 Hypersonic Shock TunnelPaulo Gilberto de Paula Toro - Instituto de Estudos Avançados - CTA

17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert

2014

3 ESSS COMPUTATIONAL

MODELING CHALLENGErd


uu CHALLENGE WINNERS ANNOUNCEMENT

Winners will be announced at the end of the Plenary Session on Wednesday May 21, 2014.

ESSS COMPUTATIONAL MODELING CHALLENGE: 3rd EDITION

uu SUPPORT

ESSS and Eletrobras Cepel are pleased to invite all conference participants to visit the poster session at the foyer on May 20 and 21, 2014. The challenge was created with the objective to promote the exchange of ideas and experiences between academia and industry.

In this 3rd edition, ESSS will count with the contribution of the Electric Power Research Center (Cepel-Eletrobras), considered the greatest research center on electric power of the Southern Hemisphere.

The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS.

VENUE

Daily rate for 2014 ESSS Conference & ANSYS Users Meeting. Phone Number: +55 (11) 3049 6623

Single Room: R$ 486,00 (+ 5%) Double Room: R$544,00 (+5%)

RATES

For another options of Hotels in the region, please contact Valencia Agência de Viagens e Turismo Ltda.

E-mail: [email protected] Phone: (11) 3111 2454 / (11) 9 9621 6875

CAESAR BUSINESS FARIA LIMA


INFORMATION AND REGISTRATION

www.esss.com.br/usersmeetingE-mail: [email protected] São Paulo: +55 (11) 3046 5744 | Rio de Janeiro: +55 (21) 3293 1300 | Florianópolis: +55 (48) 3953 0000

Rua Olimpíadas, 205 - São Paulo - SP - BrazilPhone Number: +55 (11) 2161 4900 www.accorhotels.com

Strategically located in the city’s new business hub, the Vila Olímpia, which is considered to be an important commercial and financial center, and home to major companies. The hotel is situated less than 10 minutes from the airport and from Ibirapuera park and is very close to excellent bars and restaurants, prestigious international stores and the city’s best entertainment venues.

Airports

GUARULHOS (36.50 km / 22.68 mi)CONGONHAS (5.50 km / 3.42 mi)

MORE INFORMATION


http://www.esss.com.br/events/ansys2014/brazil/local

Documents

Caesar Business Faria Lima, São Paulo SP - Brazil May 19-21, 2014esss.com.br/events/ansys2014/brazil/pdf/UGM2014_Brazil_preliminary... · in Computer Aided Engineering (CAE) and