CADR:

Noise level:

Voltage:

Frequency:

Power Consumption:

Fan speed setting:

Product net weight:

Product measur-ments:

Smoke: 102cfm; Dust: 104cfm; Pollen: 111cfm.55dB120V~

60Hz30W

3-speed-setting:High, Medium, Low. 6.37 lbs

(L)8.27 in*(W)8.38 in*(H)12.48 in

een ure

3：Moving the knob up and down to choose your expected fan speed

OFFHEPA RESET LIGHT

HEPA RESET BUTTONHIGH SPEEDMEDIUM SPEEDLOW SPEED

Air vent

Fan speed control knob

HEPA filter reset button

Chamber cover OPEN/CLOSE switch

HEPA filter chamber cover

When HEPA RESET LIGHT keeps flickering, unplug the air purifier and replace the HEPA filter with a new one

Top view

Front view

Bottom view

Push the switch toward the arrow direction to unlock and open the filter chamber cover.

Pull the used HEPA filter out, and insert a new one.

Lock the chamber cover, then press and hold the HEPA reset button for 5 seconds to reset.

KP100A

Air Purifier

Product Overview How to replace HEPA filter?

Product specifications

How to use it?

Before using it, please read this user ’s manual carefully, and keep it for reference.

Safety Precautions:Provided in this manual are important safety messages regarding your electrical home appliance. Always read, follow and save all safety directions.

Location Requirements• Use a level surface at least 6” (15.2cm) from heat sources such as ranges or heaters.• Do not block air vent openings or place air purifier on a soft surface such as bed or sofa.• Never insert fingers or foreign objects into air grills or vents.• Do not use it in any heavy traffic area.• Indoor use only.

To reduce risk of fire or electrical shock, please always follow below instructions when operating this air purifier. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.”• Always unplug the air purifier when is not in operation.• Ensure that filter is correctly installed before turning it on.• Do not use it next to any heat sources like heater, dryer, and fireplace, etc.• Always unplug the air purifier before replacing HEPA filter.• Do not use any extended power cord.• Do not plug and unplug the air purifier with wet hand.• Never try to take apart or repair the unit by yourself.• Turn it off immediately if any abnormal sound, smell or smoke comes from it.• Do not drop the unit, as doing so may damage it.• Do not place heavy objects on the power cord.• Do not use near a bath, shower, swimming pool or where a unit can get wet.• Do not exceed the rating of the power outlet or connection device.

WARNING : To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.

Replacing steps:

RESET

TROUBLE SHOOTING

Problem Solution

• Unit will not operate.

Make sure unit is properly plugged in and the outlet is energized.Make sure the filter is properly installed.Check to make sure the unit is on by turning the Control Knob to HIGH SPEED position.

• Decreased air flow.

Check to ensure nothing is blocking air inlet and filtered air outlet. Check the filter to see if it is in good condition and if filter needs to be changed.