cables

NSW+61 2 9893 9400

Wellington+64 4 915 9500

Victoria+61 3 9775 4778

Auckland+64 9 443 9500

Christchurch+64 3 355 4545

www.activecomponents.com [email protected] Over one million electronic components online.

CB-1

Active Components specialises in Custom Power Cords and other cable assemblies

We offer high quality, low cost solutions. Fully assembled finished products or partially assembled

for manufacturers.

All Power products are SAA approved for the Australia/New Zealand market. International

versions are also available upon request.

Contact us today for a quotation.

aCtive Components Custom CaBle design

3 simple steps:

custom cable design

1. Talk to us/send us your design.

2. Samples/drawings provided for testing.

3. Start a small, medium or large production run.

CB-2

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



ieC aust/nZ 2m 10a power lead BlaCk

ieC aust/nZ 2m 10a tapon power lead BlaCk

Wide range available. Contact us for more information.

Made to your unique design specifications.

Colour manf. part no.

Black B301264

Colour manf. part no.

Black B301249

custom cable design

CaBles/wire

wiring Harnesses

power CaBles - CUSTOM DESIGN OR FINISHED ASSEMBLY

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



CB-3

power cables / multimedia / cable ties

Moulded socket with 2m length open ended 3 core 0.75mm² HO5VV-5 cable.

multimedia -Cables/Adapters, HDMI

type length manf. part no.

HDMI (M) to HDMI (M) Gold 1 m 68803-0015




HDMI (M) to HDMI (M) Gold - Superflex Cable 1 m 68803-0019



type length manf. part no.

HDMI (M) to DVI (M) Gold 2 m 68803-0028

HDMI (M) to DVI (M) Gold 3 m 68803-0029

HDMI (M) to DVI (M) Gold - Superflex Cable 1 m 68803-0031



type manf. part no.

HDMI (F) to DVI-D (M) Gold - Adapter 68803-0025

manf. part no.

672001

order Code

USB 2.0 A male to B male, 1.8m Beige B181258

USB 2.0 A male to A male, 1.8m Beige B181260

USB 2.0 A male to A female, 1.8m Beige B181261

usB CaBles

ieC C13 soCket-Open Ended Lead

NEXT

HDMI TO HDMI HDMI TO DVI Adapter

CaBle ties-Non-releasable

size (mm) lxworder Code natural

(100 pack)order Code Black uv

(100 pack)

120x2.4mm - CT120MUV

140x3.2mm CT140I CT140IUV

165x2.4mm CT160M -

160x4.8mm CT160ST CT160STUV


200x2.4mm CT200M CT200MUV


250x4.8mm CT250ST -



380x7.6mm - CT370HDUV

370x3.2mm CT370I -


450x8.0mm CT450HDUV -

CaBle ties-Finger Releasable, Green Colour

size (mm) lxw manf. part no.

150x7.6 CT150HDRG

200x7.6 CT200HDRG

300x7.6 CT300HDRG

Standard Nylon 6/6 Cable Ties• ULApproved:UL94V-2 • MILSPEC23190D• OperatingTemperature:-40°Cto+85°C• Allnylononepiececonstruction• From8-114kgminimumlooptensilestrength• Colour:natural• Packaging:sealedbagsof100 Ultra Violet/ Weather Resistant Nylon 6/6 Cable Ties• Allstandardnylon6/6cabletiesarealsoavailableinultravioletstabilised black nylon making them suitable for outdoor applications.

CaBle ties-Non-Releasable Marker Tag

size (mm) lxw

minimum tensile strength

(kg)

maximum Bundle dia.

(mm)

markin pad size (mm)

manf. part no.

100x2.5 8 25 25x8 MCV-100

11.x2.5 8 25 25x8 MCV-110

• NaturalcolourUL94V-2

100 x 2.5mm

110 x 2.5mm

CB-4

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



self-adHesive CaBle tie mounts

eyelet CaBle tie mounts

pusH CaBle tie mounts

size (mm) lxwmtg. Hole dia.

(mm)suit Cable tie width (mm)

manf. part no.

19x9.5 5.2 Up to 5.0 HC-0L

size (mm) lxwsuit Cable tie width

(mm)manf. part no.

21.8x21.8 Up to 4.0 HC-101

26.1x26.1 Up to 7.0 HC-25

Hole dia. (mm)suit Cable tie width

(mm)manf. part no.

6.2 Up to 8.0 PHC-8



• NaturalcolourUL94V-2• Screwmount

Size 21.8 x 21.8mm Size 26.1 x 26.1mm

CaBle Clamps -ligHt grey

snap-in type

Bundle max. dia. (mm)

manf. part no.

7.0 PTS-0607

8.0 PTS-0708

10.0 PTS-0910

14.0 PTS-1214

18.0 PTS-1618

snap-in type

Bundle Cross section (mm)

manf. part no.

4x11 KWS-1

19x11 KWS-2

28x11 KWS-3

adhesive type


manf. part no.

7.0 TS-0607

8.0 TS-0708

10.0 TS-0910

14.0 TS-1214

18.0 TS-1618

adhesive type

Bundle Cross section (mm)

manf. part no.

11.2x11 AWS-1210


manf. part no.

3.0 UC-0

5.0 UC-0.5

6.35 UC-1

9.5 UC-2

15.8 UC-4

25.4 UC-6

31.8 UC-7

ribbon Cable type manf. part no.

30 Way FCT-30

40 Way FCT-40

50 Way FCT-50

60 Way FC-776

lxwxH (mm) manf. part no.

28x13x6 SFC-28

15x13x6 SFC-15

28x24x9 FC-28

20x24x9 FC-20

15x24x9 FC-15

• MadeofULrecognised6/6Nylon (UL94V-2)• Selfadhesiveorsnap-in (6.4mm hole dia.)

p Clips

riBBon CaBle Clips

• MadeofULrecognised6/6Nylon(UL94V-2)• Naturalcolour• Roundform-nosharpedgestodamage wires/cables

• Self-adhesivebacking• Serratedtogripcable• MadeoffireretardingPVC

riBBon CaBle Clamps

loCking wire saddles

Cord grips

• MadeofULrecognised6/6nylon(UL94V-2)• Selfadhesiveorsnap-in(4.8mmholedia.)

• Firmlygripandprotectcablesthrough panel entry• Flameretardantnylon6/6(UL94V-2)• Colourblack

Cable dia. (mm)

l (mm) t (mm) w (mm)dia. (mm)

manf. part no.

7.1-7.6 10.3 0.5-1.6 11.3 12.7 SR-F41

7.1-7.6 10.3 1.8-2.5 11.8 12.7 SR-F42

7.4-8.2 14.8 0.5-1.6 14.0 15.9 SR-6P1

7.4-8.2 14.8 0.5-1.6 14.0 15.9 SR-6P3

8.2-9.2 14.8 0.5-1.6 14.0 15.9 SR-6R1

8.2-9.2 14.8 1.9-3.2 14.0 15.9 SR-6R3


L

T

W

PANEL THICKNESSPANEL HOLE

Dia.

cable accessories

L

T

W


Dia.L

T

W


Dia.

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



CB-5

accessories / HeatsHrinK


plastiC Clips -purse loCk ties

CaBle glands

spiral wrapping

• Wateranddustproof(RatedtoIP68)• Material-ULapprovedblacknylonUL94-V2

wire diameter (mm) manf. part no.

3-6 AGR-12

4-10 AGR-16

5-14 AGR-20

8-18 AGR-25

• Canbeusedtobundle,harnessor insulate as well as to protect wires from abrasion• Madefrompolyethylene• Excellentinsulationand binding strength• Colour-naturalorblack(othercoloursavailablebyrequest)• Economical• Packaging10mperdia.

wrapping diameter (mm)

manf. part no.natural Black

10-50 ST-6 ST-6B

15-60 ST-8 ST-8B

20-60 ST-10 ST-10B

20-65 ST-12 ST-12B

20-70 ST-15 ST-15B

25-100 ST-19 ST-19B

30-130 ST-24 ST-24B

length (mm) thickness (mm) Bundle dia. (mm) manf. part no.

25.4 1.8 7.0-10 TT-08

29.3 1.8 10.0-13 TT-11

34.0 2.0 13.0-16.5 TT-15

40.0 2.0 16.5-20 TT-18

45.5 2.0 20.0-26 TT-24

standard packaging:Cut 1.2m length

standard Colours:Class 1 (flame retardant)-black, red, white and blue.

3M™FP-221VWTubingisspeciallyengineeredforsuperiorflameresistance.FP-221VWisULrecognisedandCSACertifiedat600volts@125°C (UL File No. E-39100; CSA File No. LR38227).

FP-221VWTubingisidealforfire-resistantcoveringsofcomponentsandflammable wire assemblies.

NOTE:FP-22IVWisnotRoHScompliant

(useFP-301ifRoHScompliancyisrequired).

3m™ fp-221vw-Heat Shrink Tubing

physical CharacteristicsTensile strength .........................................2400PSI Ultimate elongation .................................. 400% Longitudinal change ................................. +1, -10% Secant modulus (2%) ................................13,000PSI Specific gravity .......................................... 1.5 Heataging(168hrs.@175°C) .................. Elongation 175% Heatshock(4hrs.@250°C) ...................... No Dripping, cracking, passes mandrel wrap testLowTemp.flexibility(4hrs.@-55°C) ......... No cracking Flammability ............................................. Self-extinguish, meets UL 224, All-tubing flame test (class 1 only)

electrical CharacteristicsDielectric strength ..................................... 900V/mil Volume resistivity ...................................... 1015 ohm-cm

Chemical CharacteristicsCorrosive effect......................................... Non corrosive, solvent resistanceTensile strength .........................................1000PSI Dielectric strength ..................................... 400V/mil Water absorption ...................................... 0.2% Fungus resistance ...................................... Non-nutrient

order size

expanded inside dia. min. (mm)

recovered inside dia. max. (mm)

recovered wall thickness (mm)

3mm 3 1.5 0.45+1.0

5mm 5 2.5 0.55+0.1

7mm 7 3.5 0.55+0.1

10mm 10 5 0.60+0.1

13mm 13 6.5 0.70+0.1

20mm 20 10 0.90+0.1

25mm 25 12.5 0.90+0.1

40mm 40 20 1.00+0.2

50mm 50 25 1.00+0.2

CB-6

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



standard packaging: Cut 4 foot/1.2m length

standard Colours: Class 1 (flame retardant)-black, white,

red, blue, green

(1/16 ”-1” green only) and yellow.

FP-301,class2(non-flameretardant)-clear.

3m™ fp-301 (roHs Compliant)-Heat Shrink Tubing

physical CharacteristicsTensile strength ........................................2400PSI Ultimate elongation.................................. 400% Longitudinal change ................................. ±5% Heataging(336hrs.@175°C) .................. Elongation 175% Heatshock(4hrs.@250°C) ...................... No dripping, cracking, passes mandrel wrap testLowTemp.flexibility(4hrs.@-55°C) ........ No cracking Flammability ............................................. Self-extinguish, meets UL 224, All-tubing flame test (class 1 only)

electrical Characteristics

Dielectric strength .................................... 900V/mil Volume resistivity ..................................... 1015 ohm-cm

Chemical CharacteristicsCorrosive effect ........................................ Non corrosive, solvent resistanceTensile strength ........................................1000PSI Dielectric strength .................................... 400V/mil

order size

expanded inside dia. min.

in. (mm)

recovered inside dia. max.

in. (mm)

recovered wall thickness

in. (mm)3/64” .046 (1,17) .023 (0,58) .016 (0,41)

1/16” .063 (1,60) .031 (0,79) .017 (0,43)

3/32” .093 (2,36) .046 (1,17) .020 (0,51)

1/8” .125 (3,18) .062 (1,57) .020 (0,51)

3/16” .187 (4,75) .093 (2,36) .020 (0,51)

1/4” .250 (6,35) .125 (3,18) .025 (0,64)

3/8” .375 (9,53) .187 (4,75) .025 (0,64)

1/2” .500 (12,70) .250 (6,35) .025 (0,64)

3/4” .750 (19,05) .375 (9,53) .030 (0,76)

1” 1.000 (25,40) .500 (12,70) .035 (0,89)

1 1/2” 1.500 (38,10) .750 (19,05) .040 (1,02)

2” 2.000 (50,80) 1.000 (25,40) .045 (1,14)

3” 3.000 (76,20) 1.500 (38,10) .050 (1,27)

4” 4.000 (101,60) 2.000 (50,80) .055 (1,40)

3M™FP-301isaheat-shrinkableflexiblepolyolefintubingthatoffersanoutstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.

Ratedfor135°Ccontinuousoperation.FP-301tubingistypicallyusedasashrink-fitelectricalinsulationovercablesplicesandterminations.Itisalsoused for lightweight wire harness covering, wire marking, wire bundling, componentandfireresistantcovering.

Tubing kits with assorted colours also available.

HeatsHrinK

3m eps-300 -Adhesive Heat Shrink Tubing

physical CharacteristicsTensile strength ........................................2100PSI Ultimate elongation.................................. 450% Longitudinal change ................................. +1, -15% Heataging(168hrs.@175°C) .................. Elongation 175% Heatshock(4hrs.@225°C) ...................... No dripping, flowing, cracking LowTemp.flexibility(4hrs.@-55°C) ........ No cracking Flammability ............................................. Self-extinguish, meets UL 224, All-tubing flame test (jacket)

electrical CharacteristicsDielectric strength .................................... 700V/mil Volume resistivity ..................................... 1014 ohm-cm

Chemical CharacteristicsCorrosion resistance (copper mirror) ......... Non Corrosive Fluid resistance ......................................... Excellent

adhesive CharacteristicsPeelstrength,pli Polythene ................................................. 30 PVC .......................................................... 10 Lead ......................................................... 15 Aluminium ............................................... 40 Corrosive effect (copper mirror) ............... Non-Corrosive

3M™EPS-300isa3:1shrinkratiotubingofferingtheadvantagesof integral, dual wall construction. The tubing is made from flame-retardant (exceptclear),flexiblepolyolefin-linedwithaninternallayerofspecialthermoplastic adhesive.The heat shrinkable outer wall is selectively irridation cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics.

order sizeexpanded inside dia. min. recovered inside dia. max. recovered wall thickness meltable recovered wall thickness

in. (mm) in. (mm) in. (mm) in. (mm)

1/8” .125 (3,18) .040 (1,02) .040 (1,02) .020 (0,51)

3/16” .187 (4,75) .062 (1,57) .040 (1,02) .020 (0,51)

1/4” .250 (6,35) .080 (2,03) .040 (1,02) .020 (0,51)

3/8” .375 (9,53) .120 (3,05) .055 (1,40) .025 (0,62)

1/2” .500 (12,70) .160 (4,06) .070 (1,78) .030 (0,76)

3/4” .750 (19,05) .250 (6,35) .085 (2,16) .035 (0,89)

1” 1.000 (25,40) .320 (8,13) .100 (2,54) .040 (1,02)

1 1/2” 1.500 (38,10) .510 (12,95) .100 (2,54) .040 (1,02)

StandardPackaging:

Cut 4 foot/1.2m length

StandardColours:

Black and clear in all sizes.

Red in 1/2”, 3/4” and 1” only.

Clear tubing is not flame retardant or UL approved

Tubing kits with assorted

colours also available.

Documents

cables