Embed Size (px)
Citation preview
bonn metalsCONSTRUCTION INDUSTRIES L.L.C.
CABLE TRUNKINGSYSTEMS
CABLE TRUNKINGSYSTEMS
MANAGEMENT SYSTEMSMANAGEMENT SYSTEMSMETAR CABLEMETAR CABLE
CONTENTS
COMPANY PROFILE
TRUNKING CAPACITY GUIDE
SURFACE CABLE TRUNKING
STRAIGHT LENHGTS
SCREW LOCK ARRANGEMENT
STRAIGHT CONNECTOR
BEND TOP COVER
BEND INSIDE COVER
BEND OUTSIDE COVER
TEE TOP COVER
TEE INSIDE COVER
TEE OUTSIDE COVER
CROSS TOP COVER
REDUCER
OFFSET
HANGERS & PLYMOUTH
SEPERATOR & RETAINER
COVERS & BLIND END
01
02
03
04
05
06
07
09
11
13
14
15
16
17
18
20
21
22
1
TRUNKING CAPACITY GUIDE
2 3
TO USE THIS GUIDE
The following guide will help you to select the correct size of trunking for the required number and size of cables in your installation. It has been prepared from Appendix 12 of the I.E.E wiring regulations for electrical installations. When cables are pulled into trunking they experience a drag from other cables and from the trunking itself. Using this guide to select the size of trunking for your cabling will ensure that an acceptable pulling force is required to install the cables and that minimum damage to the installations will occur. This is only a guide and is designed for use with single core PVC insulated
Calculate Capacity unit by multiplying the Number of cables by the factor from Table A Use capacity unit to choose nearest size of trunking from table B Remember that cables can cross over each other and that you may need space for future wiring. Consequently, select the next size up.
REFERENCE
504020
1.5 Stranded 2.5 Stranded 6.0 Stranded
8.1 11.4 22.9
405 456 458
Total 1319
NUMBER OF
From table B, the capacity Unit of 1319 falls between 50 x 50 mm and 75 x 50 mm trunking.
CABLES
TYPE OF CONDUCTOR
CONDUCTOR CROSS
SECTION
FACTOR(FROM A)
CAPACITY UNIT (FROM B)
CONDUCTOR CROSS SECTION MM 2
TABLE AFACTOR
1.52.5 1.5 2.5 4 610 1625 35
7.110.28.111.415.222.936.342.962.695
Solid
Stranded
CAPACITYUNIT
DIMENSIONOF TRUNKING
MMXMM
TABLE B
75 X 25100 X 2550 X 5075 X 50100 X 5075 X 75150 X 50100 X 75100 X 100150 X 75150 X 150
738993103715552091237131623189425247439697
Note: For sizes and types of cables not included in the above tables A and B calculate total cross section of cables and select trunking size so that not more than 45% of trunking is filled.
3
SURFACE CABLE TRUNKING
FOR STRAIGHT LENGTHS & ACCESSORIES
STANDARD FINISHES PG Pre-galvanized to BS EN 10142 & 10143 PC Power Coating to suit clients requirements
METAR - Cable Trunkings are manufactured compling to BS 4678 Part1METAR - Cable Trunkings are manufacured to a standard length of 3 mts but can be produced to any desired length also on request.METAR Cable Trunkings are manufacutred with jet lock & screw fixing covers. Jet lock arrangement requires only a quarter rotation of the turn buckle for fixings.METAR Cable Trunking straight lengths are joined by connectors. Connectors are supplied in pairs with trunkings along with neccessary fastners For details refer pageMETAR-Cable Trunking Accessories are produced out of single piece and require no welding. Accessories are produced with integral connectors & require no seperate connectors for joining.METAR-Cable Trunking Accessories are manufactured to a standard radius of 300mm, but can be produced to the radius of 600mm & 900mm also, on request.METAR-Cable Trunkings can be produced with different thickness also for custom designed requirements.
ORDER PATTERNJ:- Jet lock ArrangementS: Screw fixing Arrangement
ExampleSingle Chamber jet lock trunking 100mm wide & 100mm side height:- J-C/T 4-4Double Chamber jet lock trunking 100mm, wide 100mm side height :- J-2C/T 4-4
NOTE:Use ‘J’ as prefix while ordering jetlock arrangements and ‘S’ as prefix while ordering screw fixing arangements & 2C or 3C for ordering two or three compartments.METAR - Cable Trunkings are manufactured in Single & Multi-Compartments also.
4 3
SINGLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-C / T2-2J-C / T3-2J-C / T3-3J-C / T4-2J-C / T4-3J-C / T4-4J-C / T6-2J-C / T6-3J-C / T6-4J-C / T6-6J-C / T9-2J-C / T9-3J-C / T9-4J-C / T9-6J-C / T9-9
J-C / T12-2J-C / T12-3J-C / T12-4J-C / T12-6J-C / T12-9
J-C / T12-12
J-2C / T2-2J-2C / T3-2J-2C / T3-3J-2C / T4-2J-2C / T4-3J-2C / T4-4J-2C / T6-2J-2C / T6-3J-2C / T6-4J-2C / T6-6J-2C / T9-2J-2C / T9-3J-2C / T9-4J-2C / T9-6J-2C / T9-9
J-2C / T12-2J-2C / T12-3J-2C / T12-4J-2C / T12-6J-2C / T12-9
J-2C / T12-12
J-3C / T2-2J-3C / T3-2J-3C / T3-3J-3C / T4-2J-3C / T4-3J-3C / T4-4J-3C / T6-2J-3C / T6-3J-3C / T6-4J-3C / T6-6J-3C / T9-2J-3C / T9-3J-3C / T9-4J-3C / T9-6J-3C / T9-9
J-3C / T12-2J-3C / T12-3J-3C / T12-4J-3C / T12-6J-3C / T12-9
J-3C / T12-12
DOUBLE COMPARTMENT
W
H
8
JET LOCKING
T
10
40
LOCKING CLAMP
SINGLE COMPARTMENT TRUNKING
STRAIGHT LENHGTS
5
SINGLE COMPARTMENT
DOUBLE COMPARTMENT
SINGLE COMPARTMENT TRUNKING
W
H
8
Machine Screw Pan Philip M6x10
T
40
10SCREWRETAINER
SCREW LOCK ARRANGEMENT METAR - Trunkings are manufactured in single and multi compartments also
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
S-C / T2-2S-C / T3-2S-C / T3-3S-C / T4-2S-C / T4-3S-C / T4-4S-C / T6-2S-C / T6-3S-C / T6-4S-C / T6-6S-C / T9-2S-C / T9-3S-C / T9-4S-C / T9-6S-C / T9-9
S-C / T12-2S-C / T12-3S-C / T12-4S-C / T12-6S-C / T12-9
S-C / T12-12
S-2C / T2-2S-2C / T3-2S-2C / T3-3S-2C / T4-2S-2C / T4-3S-2C / T4-4S-2C / T6-2S-2C / T6-3S-2C / T6-4S-2C / T6-6S-2C / T9-2S-2C / T9-3S-2C / T9-4S-2C / T9-6S-2C / T9-9
S-2C / T12-2S-2C / T12-3S-2C / T12-4S-2C / T12-6S-2C / T12-9
S-2C / T12-12
S-3C / T2-2S-3C / T3-2S-3C / T3-3S-3C / T4-2S-3C / T4-3S-3C / T4-4S-3C / T6-2S-3C / T6-3S-3C / T6-4S-3C / T6-6S-3C / T9-2S-3C / T9-3S-3C / T9-4S-3C / T9-6S-3C / T9-9
S-3C / T12-2S-3C / T12-3S-3C / T12-4S-3C / T12-6S-3C / T12-9
S-3C / T12-12
STRAIGHT LENHGTS
6 3
STRAIGHT CONNECTOR
BONDING JUMPER / EARTH STRIP
20
50
H30
8
T
Connectors are supplied with trunking with a set of pan Philip M6 X 10 machine screw, nut and washer.
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
CST2-2
CST3-2
CST3-3
CST4-2
CST4-3
CST4-4
CST6-2
CST6-3
CST6-4
CST6-6
CST9-2
CST9-3
CST9-4
CST9-6
CST9-9
CST12-2
CST12-3
CST12-4
CST12-6
CST12-9
CST12-12
SIZEmm
THICKNESSmm
CONNECTOR
STRAIGHTCONNECTOR
U - CONNECTOR
Note: To order U- connector, use ‘U’ as prefix to ‘CST’ in the table. Bonding jumpers for the trunking are supplied in a pack of 25 numbers. Bonding jumpers are required to be ordered separately.
PART REF
U-Type connectors are optional and to be ordered separately.
BJ / TRK
STRAIGHT CONNECTOR
7
BEND TOP COVER - 90º
JET LOCK ARRANGEMENT
Note: To order screw lock bend top cover 90º, use ‘S’ as prefix in place of ‘J’ in the table.
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-BTC9/2-2J-BTC9/3-2J-BTC9/3-3J-BTC9/4-2J-BTC9/4-3J-BTC9/4-4J-BTC9/6-2J-BTC9/6-3J-BTC9/6-4J-BTC9/6-6J-BTC9/9-2J-BTC9/9-3J-BTC9/9-4J-BTC9/9-6J-BTC9/9-9J-BTC9/12-2J-BTC9/12-3J-BTC9/12-4J-BTC9/12-6J-BTC9/12-9J-BTC9/12-12
J-2BTC9/2-2J-2BTC9/3-2J-2BTC9/3-3J-2BTC9/4-2J-2BTC9/4-3J-2BTC9/4-4J-2BTC9/6-2J-2BTC9/6-3J-2BTC9/6-4J-2BTC9/6-6J-2BTC9/9-2J-2BTC9/9-3J-2BTC9/9-4J-2BTC9/9-6J-2BTC9/9-9J-2BTC9/12-2J-2BTC9/12-3J-2BTC9/12-4J-2BTC9/12-6J-2BTC9/12-9J-2BTC9/12-12
J-3BTC9/2-2J-3BTC9/3-2J-3BTC9/3-3J-3BTC9/4-2J-3BTC9/4-3J-3BTC9/4-4J-3BTC9/6-2J-3BTC9/6-3J-3BTC9/6-4J-3BTC9/6-6J-3BTC9/9-2J-3BTC9/9-3J-3BTC9/9-4J-3BTC9/9-6J-3BTC9/9-9J-3BTC9/12-2J-3BTC9/12-3J-3BTC9/12-4J-3BTC9/12-6J-3BTC9/12-9J-3BTC9/12-12
0BEND TOP COVER 90SINGLE COMPARTMENT
0BEND TOP COVER 90DOUBLE COMPARTMENT
8 3
BEND TOP COVER - 45º
0BEND TOP COVER 45SINGLE COMPARTMENT
0BEND TOP COVER 45DOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
Note: To order screw lock bend top cover 45º, use ‘S’ as prefix in place of ‘J’ in the table.
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-BTC4/2-2J-BTC4/3-2J-BTC4/3-3J-BTC4/4-2J-BTC4/4-3J-BTC4/4-4J-BTC4/6-2J-BTC4/6-3J-BTC4/6-4J-BTC4/6-6J-BTC4/9-2J-BTC4/9-3J-BTC4/9-4J-BTC4/9-6J-BTC4/9-9J-BTC4/12-2J-BTC4/12-3J-BTC4/12-4J-BTC4/12-6J-BTC4/12-9J-BTC4/12-12
J-2BTC4/2-2J-2BTC4/3-2J-2BTC4/3-3J-2BTC4/4-2J-2BTC4/4-3J-2BTC4/4-4J-2BTC4/6-2J-2BTC4/6-3J-2BTC4/6-4J-2BTC4/6-6J-2BTC4/9-2J-2BTC4/9-3J-2BTC4/9-4J-2BTC4/9-6J-2BTC4/9-9J-2BTC4/12-2J-2BTC4/12-3J-2BTC4/12-4J-2BTC4/12-6J-2BTC4/12-9J-2BTC4/12-12
J-3BTC4/2-2J-3BTC4/3-2J-3BTC4/3-3J-3BTC4/4-2J-3BTC4/4-3J-3BTC4/4-4J-3BTC4/6-2J-3BTC4/6-3J-3BTC4/6-4J-3BTC4/6-6J-3BTC4/9-2J-3BTC4/9-3J-3BTC4/9-4J-3BTC4/9-6J-3BTC4/9-9J-3BTC4/12-2J-3BTC4/12-3J-3BTC4/12-4J-3BTC4/12-6J-3BTC4/12-9J-3BTC4/12-12
9
BEND INSIDE COVER - 90º
BEND INSIDE COVER 900
SINGLE COMPARTMENT
0BEND INSIDE COVER 90DOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-BIC9/2-2J-BIC9/3-2J-BIC9/3-3J-BIC9/4-2J-BIC9/4-3J-BIC9/4-4J-BIC9/6-2J-BIC9/6-3J-BIC9/6-4J-BIC9/6-6J-BIC9/9-2J-BIC9/9-3J-BIC9/9-4J-BIC9/9-6J-BIC9/9-9J-BIC9/12-2J-BIC9/12-3J-BIC9/12-4J-BIC9/12-6J-BIC9/12-9J-BIC9/12-12
J-2BIC9/2-2J-2BIC9/3-2J-2BIC9/3-3J-2BIC9/4-2J-2BIC9/4-3J-2BIC9/4-4J-2BIC9/6-2J-2BIC9/6-3J-2BIC9/6-4J-2BIC9/6-6J-2BIC9/9-2J-2BIC9/9-3J-2BIC9/9-4J-2BIC9/9-6J-2BIC9/9-9J-2BIC9/12-2J-2BIC9/12-3J-2BIC9/12-4J-2BIC9/12-6J-2BIC9/12-9J-2BIC9/12-12
J-3BIC9/2-2J-3BIC9/3-2J-3BIC9/3-3J-3BIC9/4-2J-3BIC9/4-3J-3BIC9/4-4J-3BIC9/6-2J-3BIC9/6-3J-3BIC9/6-4J-3BIC9/6-6J-3BIC9/9-2J-3BIC9/9-3J-3BIC9/9-4J-3BIC9/9-6J-3BIC9/9-9J-3BIC9/12-2J-3BIC9/12-3J-3BIC9/12-4J-3BIC9/12-6J-3BIC9/12-9J-3BIC9/12-12
Note: To order screw lock bend top cover 45º, use ‘S’ as prefix in place of ‘J’ in the table.
10 3
BEND INSIDE COVER - 45º
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-BIC4/2-2J-BIC4/3-2J-BIC4/3-3J-BIC4/4-2J-BIC4/4-3J-BIC4/4-4J-BIC4/6-2J-BIC4/6-3J-BIC4/6-4J-BIC4/6-6J-BIC4/9-2J-BIC4/9-3J-BIC4/9-4J-BIC4/9-6J-BIC4/9-9J-BIC4/12-2J-BIC4/12-3J-BIC4/12-4J-BIC4/12-6J-BIC4/12-9J-BIC4/12-12
J-2BIC4/2-2J-2BIC4/3-2J-2BIC4/3-3J-2BIC4/4-2J-2BIC4/4-3J-2BIC4/4-4J-2BIC4/6-2J-2BIC4/6-3J-2BIC4/6-4J-2BIC4/6-6J-2BIC4/9-2J-2BIC4/9-3J-2BIC4/9-4J-2BIC4/9-6J-2BIC4/9-9J-2BIC4/12-2J-2BIC4/12-3J-2BIC4/12-4J-2BIC4/12-6J-2BIC4/12-9J-2BIC4/12-12
J-3BIC4/2-2J-3BIC4/3-2J-3BIC4/3-3J-3BIC4/4-2J-3BIC4/4-3J-3BIC4/4-4J-3BIC4/6-2J-3BIC4/6-3J-3BIC4/6-4J-3BIC4/6-6J-3BIC4/9-2J-3BIC4/9-3J-3BIC4/9-4J-3BIC4/9-6J-3BIC4/9-9J-3BIC4/12-2J-3BIC4/12-3J-3BIC4/12-4J-3BIC4/12-6J-3BIC4/12-9J-3BIC4/12-12
0BEND INSIDE COVER 45SINGLE COMPARTMENT
0BEND INSIDE COVER 45DOUBLE COMPARTMENT
Note: To order screw lock bend inside cover 45º, use ‘S’ as prefix in place of ‘J’ in the table.
11
BEND OUTSIDE COVER - 90º
JET LOCK ARRANGEMENT
Note: To order screw lock bend outside cover 90º, use ‘S’ as prefix in place of ‘J’ in the table.
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-BOC9/2-2J-BOC9/3-2J-BOC9/3-3J-BOC9/4-2J-BOC9/4-3J-BOC9/4-4J-BOC9/6-2J-BOC9/6-3J-BOC9/6-4J-BOC9/6-6J-BOC9/9-2J-BOC9/9-3J-BOC9/9-4J-BOC9/9-6J-BOC9/9-9J-BOC9/12-2J-BOC9/12-3J-BOC9/12-4J-BOC9/12-6J-BOC9/12-9J-BOC9/12-12
J-2BOC9/2-2J-2BOC9/3-2J-2BOC9/3-3J-2BOC9/4-2J-2BOC9/4-3J-2BOC9/4-4J-2BOC9/6-2J-2BOC9/6-3J-2BOC9/6-4J-2BOC9/6-6J-2BOC9/9-2J-2BOC9/9-3J-2BOC9/9-4J-2BOC9/9-6J-2BOC9/9-9J-2BOC9/12-2J-2BOC9/12-3J-2BOC9/12-4J-2BOC9/12-6J-2BOC9/12-9J-2BOC9/12-12
J-3BOC9/2-2J-3BOC9/3-2J-3BOC9/3-3J-3BOC9/4-2J-3BOC9/4-3J-3BOC9/4-4J-3BOC9/6-2J-3BOC9/6-3J-3BOC9/6-4J-3BOC9/6-6J-3BOC9/9-2J-3BOC9/9-3J-3BOC9/9-4J-3BOC9/9-6J-3BOC9/9-9J-3BOC9/12-2J-3BOC9/12-3J-3BOC9/12-4J-3BOC9/12-6J-3BOC9/12-9J-3BOC9/12-12
0BEND OUTSIDE COVER 90SINGLE COMPARTMENT
0BEND OUTSIDE COVER 90 DOUBLE COMPARTMENT
12 3
BEND OUTSIDE COVER - 45º
0BEND OUTSIDE COVER 45SINGLE COMPARTMENT
0BEND OUTSIDE COVER 45DOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-BOC4/2-2J-BOC4/3-2J-BOC4/3-3J-BOC4/4-2J-BOC4/4-3J-BOC4/4-4J-BOC4/6-2J-BOC4/6-3J-BOC4/6-4J-BOC4/6-6J-BOC4/9-2J-BOC4/9-3J-BOC4/9-4J-BOC4/9-6J-BOC4/9-9J-BOC4/12-2J-BOC4/12-3J-BOC4/12-4J-BOC4/12-6J-BOC4/12-9J-BOC4/12-12
J-2BOC4/2-2J-2BOC4/3-2J-2BOC4/3-3J-2BOC4/4-2J-2BOC4/4-3J-2BOC4/4-4J-2BOC4/6-2J-2BOC4/6-3J-2BOC4/6-4J-2BOC4/6-6J-2BOC4/9-2J-2BOC4/9-3J-2BOC4/9-4J-2BOC4/9-6J-2BOC4/9-9J-2BOC4/12-2J-2BOC4/12-3J-2BOC4/12-4J-2BOC4/12-6J-2BOC4/12-9J-2BOC4/12-12
J-3BOC4/2-2J-3BOC4/3-2J-3BOC4/3-3J-3BOC4/4-2J-3BOC4/4-3J-3BOC4/4-4J-3BOC4/6-2J-3BOC4/6-3J-3BOC4/6-4J-3BOC4/6-6J-3BOC4/9-2J-3BOC4/9-3J-3BOC4/9-4J-3BOC4/9-6J-3BOC4/9-9J-3BOC4/12-2J-3BOC4/12-3J-3BOC4/12-4J-3BOC4/12-6J-3BOC4/12-9J-3BOC4/12-12
13
TEE TOP COVER
TEE TOP COVERSINGLE COMPARTMENT
TEE TOP COVERDOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-TTC/2-2J-TTC/3-2J-TTC/3-3J-TTC/4-2J-TTC/4-3J-TTC/4-4J-TTC/6-2J-TTC/6-3J-TTC/6-4J-TTC/6-6J-TTC/9-2J-TTC/9-3J-TTC/9-4J-TTC/9-6J-TTC/9-9J-TTC/12-2J-TTC/12-3J-TTC/12-4J-TTC/12-6J-TTC/12-9J-TTC/12-12
J-2TTC/2-2J-2TTC/3-2J-2TTC/3-3J-2TTC/4-2J-2TTC/4-3J-2TTC/4-4J-2TTC/6-2J-2TTC/6-3J-2TTC/6-4J-2TTC/6-6J-2TTC/9-2J-2TTC/9-3J-2TTC/9-4J-2TTC/9-6J-2TTC/9-9J-2TTC/12-2J-2TTC/12-3J-2TTC/12-4J-2TTC/12-6J-2TTC/12-9J-2TTC/12-12
J-3TTC/2-2J-3TTC/3-2J-3TTC/3-3J-3TTC/4-2J-3TTC/4-3J-3TTC/4-4J-3TTC/6-2J-3TTC/6-3J-3TTC/6-4J-3TTC/6-6J-3TTC/9-2J-3TTC/9-3J-3TTC/9-4J-3TTC/9-6J-3TTC/9-9J-3TTC/12-2J-3TTC/12-3J-3TTC/12-4J-3TTC/12-6J-3TTC/12-9J-3TTC/12-12
14 3
TEE INSIDE COVER
TEE INSIDE COVERSINGLE COMPARTMENT
TEE INSIDE COVERDOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-TIC/2-2J-TIC/3-2J-TIC/3-3J-TIC/4-2J-TIC/4-3J-TIC/4-4J-TIC/6-2J-TIC/6-3J-TIC/6-4J-TIC/6-6J-TIC/9-2J-TIC/9-3J-TIC/9-4J-TIC/9-6J-TIC/9-9J-TIC/12-2J-TIC/12-3J-TIC/12-4J-TIC/12-6J-TIC/12-9J-TIC/12-12
J-2TIC/2-2J-2TIC/3-2J-2TIC/3-3J-2TIC/4-2J-2TIC/4-3J-2TIC/4-4J-2TIC/6-2J-2TIC/6-3J-2TIC/6-4J-2TIC/6-6J-2TIC/9-2J-2TIC/9-3J-2TIC/9-4J-2TIC/9-6J-2TIC/9-9J-2TIC/12-2J-2TIC/12-3J-2TIC/12-4J-2TIC/12-6J-2TIC/12-9J-2TIC/12-12
J-3TIC/2-2J-3TIC/3-2J-3TIC/3-3J-3TIC/4-2J-3TIC/4-3J-3TIC/4-4J-3TIC/6-2J-3TIC/6-3J-3TIC/6-4J-3TIC/6-6J-3TIC/9-2J-3TIC/9-3J-3TIC/9-4J-3TIC/9-6J-3TIC/9-9J-3TIC/12-2J-3TIC/12-3J-3TIC/12-4J-3TIC/12-6J-3TIC/12-9J-3TIC/12-12
15
TEE OUTSIDE COVER
TEE OUTSIDE COVERSINGLE COMPARTMENT
TEE OUTSIDE COVERDOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-TOC/2-2J-TOC/3-2J-TOC/3-3J-TOC/4-2J-TOC/4-3J-TOC/4-4J-TOC/6-2J-TOC/6-3J-TOC/6-4J-TOC/6-6J-TOC/9-2J-TOC/9-3J-TOC/9-4J-TOC/9-6J-TOC/9-9J-TOC/12-2J-TOC/12-3J-TOC/12-4J-TOC/12-6J-TOC/12-9J-TOC/12-12
J-2TOC/2-2J-2TOC/3-2J-2TOC/3-3J-2TOC/4-2J-2TOC/4-3J-2TOC/4-4J-2TOC/6-2J-2TOC/6-3J-2TOC/6-4J-2TOC/6-6J-2TOC/9-2J-2TOC/9-3J-2TOC/9-4J-2TOC/9-6J-2TOC/9-9J-2TOC/12-2J-2TOC/12-3J-2TOC/12-4J-2TOC/12-6J-2TOC/12-9J-2TOC/12-12
J-3TOC/2-2J-3TOC/3-2J-3TOC/3-3J-3TOC/4-2J-3TOC/4-3J-3TOC/4-4J-3TOC/6-2J-3TOC/6-3J-3TOC/6-4J-3TOC/6-6J-3TOC/9-2J-3TOC/9-3J-3TOC/9-4J-3TOC/9-6J-3TOC/9-9J-3TOC/12-2J-3TOC/12-3J-3TOC/12-4J-3TOC/12-6J-3TOC/12-9J-3TOC/12-12
16 3
CROSS TOP COVER
CROSS TOP COVERSINGLE COMPARTMENT
CROSS TOP COVERDOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
50 5075 5075 75100 50100 75100 100150 50150 75150 100150 150225 50225 75225 100225 150225 225300 50300 75300 100300 150300 225300 300
1.01.21.21.21.21.21.21.21.21.51.51.51.51.51.51.51.51.51.51.52.0
WIDTHmm
HEIGHTmm
THICKNESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-CTC/2-2J-CTC/3-2J-CTC/3-3J-CTC/4-2J-CTC/4-3J-CTC/4-4J-CTC/6-2J-CTC/6-3J-CTC/6-4J-CTC/6-6J-CTC/9-2J-CTC/9-3J-CTC/9-4J-CTC/9-6J-CTC/9-9J-CTC/12-2J-CTC/12-3J-CTC/12-4J-CTC/12-6J-CTC/12-9J-CTC/12-12
J-2CTC/2-2J-2CTC/3-2J-2CTC/3-3J-2CTC/4-2J-2CTC/4-3J-2CTC/4-4J-2CTC/6-2J-2CTC/6-3J-2CTC/6-4J-2CTC/6-6J-2CTC/9-2J-2CTC/9-3J-2CTC/9-4J-2CTC/9-6J-2CTC/9-9J-2CTC/12-2J-2CTC/12-3J-2CTC/12-4J-2CTC/12-6J-2CTC/12-9J-2CTC/12-12
J-3CTC/2-2J-3CTC/3-2J-3CTC/3-3J-3CTC/4-2J-3CTC/4-3J-3CTC/4-4J-3CTC/6-2J-3CTC/6-3J-3CTC/6-4J-3CTC/6-6J-3CTC/9-2J-3CTC/9-3J-3CTC/9-4J-3CTC/9-6J-3CTC/9-9J-3CTC/12-2J-3CTC/12-3J-3CTC/12-4J-3CTC/12-6J-3CTC/12-9J-3CTC/12-12
17
REDUCER
REDUCERSINGLE COMPARTMENT REDUCER
DOUBLE COMPARTMENT
JET LOCK ARRANGEMENT
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
50 X50
50 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
LARGERSIZE
(W1) mm
REDUCINGSIZE
(W2) mm
THICK-NESSmm
SINGLECOMPARTMENT
TWOCOMPARTMENT
THREECOMPARTMENT
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-2RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
J-3RS/W1-W2
18 3
FACE OFFSET RIGHT FACE OFFSET LEFT
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
J-FOR/2-2
J-FOR/3-2
J-FOR/3-3
J-FOR/4-2
J-FOR/4-3
J-FOR/4-4
J-FOR/6-2
J-FOR/6-3
J-FOR/6-4
J-FOR/6-6
J-FOR/9-2
J-FOR/9-3
J-FOR/9-4
J-FOR/9-6
J-FOR/9-9
J-FOR/12-2
J-FOR/12-3
J-FOR/12-4
J-FOR/12-6
J-FOR/12-9
J-FOR/12-12
SIZEmm
THICKNESSmm
FACE OFFSET RIGHT
FACE OFFSET RIGHT
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
J-FOL/2-2
J-FOL/3-2
J-FOL/3-3
J-FOL/4-2
J-FOL/4-3
J-FOL/4-4
J-FOL/6-2
J-FOL/6-3
J-FOL/6-4
J-FOL/6-6
J-FOL/9-2
J-FOL/9-3
J-FOL/9-4
J-FOL/9-6
J-FOL/9-9
J-FOL/12-2
J-FOL/12-3
J-FOL/12-4
J-FOL/12-6
J-FOL/12-9
J-FOL/12-12
SIZEmm
THICKNESSmm
FACE OFFSETLEFT
FACE OFFSET LEFT
19
OFFSET HORIZONTAL OFFSET VERTICAL
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
J-OH/2-2
J-OH/3-2
J-OH/3-3
J-OH/4-2
J-OH/4-3
J-OH/4-4
J-OH/6-2
J-OH/6-3
J-OH/6-4
J-OH/6-6
J-OH/9-2
J-OH/9-3
J-OH/9-4
J-OH/9-6
J-OH/9-9
J-OH/12-2
J-OH/12-3
J-OH/12-4
J-OH/12-6
J-OH/12-9
J-OH/12-12
SIZEmm
THICKNESSmm
OFFSETHORIZONTAL
OFFSET HORIZONTAL
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
J-OV/2-2
J-OV/3-2
J-OV/3-3
J-OV/4-2
J-OV/4-3
J-OV/4-4
J-OV/6-2
J-OV/6-3
J-OV/6-4
J-OV/6-6
J-OV/9-2
J-OV/9-3
J-OV/9-4
J-OV/9-6
J-OV/9-9
J-OV/12-2
J-OV/12-3
J-OV/12-4
J-OV/12-6
J-OV/12-9
J-OV/12-12
SIZEmm
THICKNESSmm
OFFSETVERTICAL
OFFSET VERTICAL
20 3
PLYMOUTHTRUNKING HANGER
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
HT2-2
HT3-2
HT3-3
HT4-2
HT4-3
HT4-4
HT6-2
HT6-3
HT6-4
HT6-6
HT9-2
HT9-3
HT9-4
HT9-6
HT9-9
HT12-2
HT12-3
HT12-4
HT12-6
HT12-9
HT12-12
SIZEmm
THICKNESSmm
HANGERS
HANGERS
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
J-PM2-2
J-PM3-2
J-PM3-3
J-PM4-2
J-PM4-3
J-PM4-4
J-PM6-2
J-PM6-3
J-PM6-4
J-PM6-6
J-PM9-2
J-PM9-3
J-PM9-4
J-PM9-6
J-PM9-9
J-PM12-2
J-PM12-3
J-PM12-4
J-PM12-6
J-PM12-9
J-PM12-12
SIZEmm
THICKNESSmm
PLYMOUTH
PLYMOUTH
21
CS-2
CS-3
CS-4
CS-6
CS-8
CS-9
CS-12
50
75
100
150
200
225
300
FITTING ADAPTER FLANGE CONNECTOR
FITTING ADAPTER FLANGE CONNECTOR
CABLE SEPARATOR
REFERENCE mmHEIGHT
CABLE RETAINER
CR-2
CR-3
CR-4
CR-6
CR-8
CR-9
CR-12
50
75
100
150
200
225
300
PART REFJ-FA/ - -
PART REFFCT/ - -
Fitting adapters can be ordered by specifying the trunking size in mm or inches in the refrence table. Screw lock Fitting adapters can be ordered by using ‘S’ as prefix in place of ‘J’ in the refrence table EXAMPLE: For 50 x 50 trunking Specify FA / 50-50 or FA / 2-2
Flange connectors can be ordered by specifying the trunking size in mm or inches in the refrence table. EXAMPLE: For 50 x 50 trunking Specify FCT / 50-50 or FCT / 2-2
CABLE SEPARATOR CABLE RETAINER
REFERENCE mmHEIGHT
3
WIDTHmm
THICKNESSmm
JET LOCKCOVERS
SCREW FIXCOVERS
50 X50
75 X 50
75 X 75
100 X 50
100 X 75
100 X 100
150 X 50
150 X 75
150 X 100
150 X 150
225 X 50
225 X 75
225 X 100
225 X 150
225 X 225
300 X 50
300 X 75
300 X 100
300 X 150
300 X 225
300 X 300
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
BET2-2
BET3-2
BET3-3
BET4-2
BET4-3
BET4-4
BET6-2
BET6-3
BET6-4
BET6-6
BET9-2
BET9-3
BET9-4
BET9-6
BET9-9
BET12-2
BET12-3
BET12-4
BET12-6
BET12-9
BET12-12
SINGLE COMPARTMENT COVER
BLIND END
50
BLIND END
75
100
150
225
300
1.0
1.2
1.2
1.2
1.5
1.5
J-C/TC-2
J-C/TC-3
J-C/TC-4
J-C/TC-6
J-C/TC-9
J-C/TC-12
Note: METAR cable trunking covers can be ordered seperatelyin jet lock or srew lock arrangement as required
S-C/TC-2
S-C/TC-3
S-C/TC-4
S-C/TC-6
S-C/TC-9
S-C/TC-12
SIZEmm
THICKNESSmm
BLIND END
DOUBLE COMPARTMENT COVER
SPARE TRUNKING COVERS
22
23
Notes:
Notes:
24
25
Notes:
3
Office and StoreSharjah ind. Area No. 13, P.O. Box 31737,
Sharjah, United Arab Emirates.Tel. : +971 6 5359326, Fax : +971 6 5392244
Factory addressBlock No:1358, Sajja Ind.area,
Near Sharjah Cement Factory, Sharjah, UAE
![07_sizing Busbar Trunkings V1 [Compatibility Mode]](https://img.pdfslide.us/doc/110x75/577cc5df1a28aba7119d4d79/07sizing-busbar-trunkings-v1-compatibility-mode.jpg)
