12
DRIL-QUIP, INC. OFFSHORE DRILLING AND PRODUCTION EQUIPMENT DRIL-QUIP, INC. OFFSHORE DRILLING AND PRODUCTION EQUIPMENT www.dril-quip.com SC-90 CONVENTIONAL SURFACE WELLHEAD SYSTEM

Cabeza arboles de navidad

Embed Size (px)

Citation preview

  • DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT

    DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT

    www.dril-quip.com

    SC-90 CONVENTIONALSURFACE WELLHEAD SYSTEM

  • 1SC-90 SerieS Conventional Wellhead

    OPEN

    SC-90 Conventional Flanged WellheadBOP Stack Sizes: 20 " 3k x 13 5/8" 5k x 11" 10k Casing Program: 30" x 20" x 13 3/8" x 9 5/8"

    Typical Wellhead for Land

    or Platform

    The SC-90 Series Conventional Wellhead System is a cost-effective wellhead designed for land, jack-up or platform drilling and completion applications.

    BaSiC SyStem FeatureS

    Range of pressure and sizes to accom-modate most casing programs

    Weight-set slip hangers with weight-set seal and/or optional mechanical-set seal

    Ported for plastic injection (standard)

    Tubing hangers available with resilient or metal- to-metal seals

    Downhole control line connections and electrical feed through assemblies available upon request

    Available for standard or critical service

    11" - 10,000 psi API Flange

    VR Cover Flange 2 1/16" - 10,000 psi

    Casing Spool 11" - 10,000 psi Flange Upx 13 5/8" - 5,000 psi Flange Down

    Annulus Access Manual Valve 2 1/16" - 10,000 psi

    Companion Flange 2 1/16" - 10,000 psi

    Base Plate

    9 5/8" Casing13 3/8" Casing20" Casing

    30" Casing

    DQ X-Bushing13 5/8" x 9 5/8"

    Companion Flange 2 1/16" - 5,000 psi

    Annulus Access Manual Valve 2 1/16" - 5,000 psi

    Annulus Access Manual Valve 2 1/16" - 3,000 psi

    Casing Head Housing 20 3/4" - 3,000 psi Flange Up x 20" Slip-On Weld

    Companion Flange 2 1/16" - 3,000 psi

    Bleed Port

    Casing Head Spool13 5/8" - 5,000 psi Up x 20 3/4" - 3,000 psi Down

    Bleed Port

    Plastic Injection Port

    13 5/8" - 5,000 psi API Flange

    DQ-22 Casing Hanger 13 5/8" x 9 5/8"

    VR Cover Flange 2 1/16" - 5,000 psi

    Plastic Injection Port

    20 3/4" - 3,000 psi API Flange

    DQ X-Bushing20 3/4" x 13 3/8"

    DQ-22 Casing Hanger20 3/4" x 13 3/8"

    VR Cover Flange 2 1/16" - 3,000 psi

    Slip-On Weld Connection

  • 2OPEN

    OPEN

    SC-90 Conventional Flanged WellheadOptional Slip Lock Connector Landing Base Combination BOP Stack Sizes: 16 " 3k x 11" 5k x 11" 10kCasing Program: 30" x 16" x 10 " x 7"

    Typical Wellhead over Mudline Suspension with 16" Slip-Lok Adapter

    The SC-90 Series Conventional Wellhead System is a cost-effective wellhead designed for land, jack-up or platform drilling and completion applications.

    11" - 10,000 psi API Flange

    VR Cover Flange 2 1/16" - 10,000 psi

    VR Cover Flange 2 1/16" - 5,000 psi

    VR Cover Flange 2 1/16" - 3,000 psi

    Casing Head Spool 11" - 10,000 psi Flange Up x 11" - 5,000 psi Flange Down Annulus Access Manual Valve

    2 1/16" - 10,000 psi Flange

    Annulus Access Manual Valve 2 1/16" - 3,000 psi Flange

    Annulus Access Manual Valve 2 1/16" - 5,000 psi

    Companion Flange 2 1/16" - 10,000 psi

    16" Casing

    7" Casing

    10 3/4" Casing

    Companion Flange 2 1/16" - 5,000 psi

    Companion Flange 2 1/16" - 3,000 psi

    Casing Head Housing 16 3/4" - 3,000 psi Flange Up x 20" Slip-On Down

    Casing Head Spool 11" - 5,000 psi Flange Up x 16 3/4" - 3,000 psi Flange Down

    Bleed Port

    Bleed Port

    Bleed Ports

    Base Plate

    Plastic Injection Port

    Plastic Injection Ports

    Slip Lock

    30" Conductor

    Plastic Injection Port

    11" - 5,000 psi API Flange

    16 3/4" - 3,000 psi API Flange

    DQ-21P Casing Hanger 11" x 7"

    DQ X-Bushing 11" x 7"

    DQ-21P Casing Hanger16 3/4" x 10 3/4"

    DQ X-Bushing16 3/4" x 10 3/4"

  • 3SC-90 Conventional Flanged WellheadBOP Stack Sizes: 13 5/8" 5k x 11" 5k x 7 1/16" 10k Casing Program: 13 3/8" x 9 5/8" x 5 "

    Typical Wellhead over Mudline Suspension

    OPEN

    OPEN

    7 1/16" - 10,000 psi API Flange

    11" - 5,000 psi API Flange

    13 5/8" - 5,000 psi API Flange

    VR Cover Flange 2 1/16" - 10,000 psi

    VR Cover Flange 2 1/16" - 5,000 psi

    VR Cover Flange 2 1/16" - 3,000 psi

    Slip-On Weld Connection

    Base Plate

    DQ-21P Casing Hanger 13 5/8" x 5 1/2"

    DQ X-Bushing11" - 5 1/2"

    DQ X-Bushing13 5/8" x 9 5/8"

    DQ-21P Casing Hanger13 5/8" x 9 5/8"

    Bleed Port

    Bleed Port

    Tubing Spool 7 1/16" - 10,000 psi Flange Up x 11" - 5,000 psi Flange Down

    Annulus Access Manual Valve 2 1/16" - 10,000 psi Flange

    Annulus Access Manual Valve 2 1/16" - 3,000 psi Flange

    Annulus Access Manual Valve 2 1/16" - 5,000 psi Flange

    Companion Flange 2 1/16" - 10,000 psi

    Plastic Injection Port

    Plastic Injection Port

    Companion Flange 2 1/16" - 5,000 psi

    Companion Flange 2 1/16" - 3,000 psi

    Casing Head Housing 13 5/8" - 5,000 psi Flange Up x 13 3/8" Slip-On Weld Down

    Casing Spool 11" - 5,000 psi Flange Up x 13 5/8" - 5,000 psi Flange Down

    Test Port

    5 1/2" Casing

    9 5/8" Casing

    13 3/8" Casing

  • 4SC-90 Radial Bolt Stack-Up WellheadBOP Stack Sizes: 20 3/4" - 3k x 13 5/8" - 5k x 13 5/8" - 10kCasing Program: 30" x 20" x 13 5/8" x 9 5/8"

    Radial Bolt Wellhead over Mudline Suspension

    BOP Adapter 13 5/8" - 10,000 psi Studded Top x 13 5/8" - 10,000 psi Radial Bolt Down

    BOP Stack

    Annulus Access Manual Valve 2 1/16" - 10,000 psi

    Annulus Access Manual Valve 2 1/16" - 5,000 psi

    Companion Flange 2 1/16" - 10,000 psi

    Radial Bolt Connector 13 5/8" - 5,000 psi

    Radial Bolt Connector 20 3/4" - 3,000 psi

    Valve 2 1/16" - 3,000 psi Threaded

    9 5/8" Casing

    13 3/8" Casing

    20" Casing

    30" Casing

    Plastic Injection Port

    Companion Flange 2 1/16" - 5,000 psi

    DQ X-Bushing 20 3/4" x 13 3/8"

    Casing Spool 13 5/8" - 5,000 psi Radial Bolt Connector Up20 3/4" - 3,000 psi Radial Bolt Connector Down

    13 5/8" - 10,000 psi API Flange

    13 5/8" - 5,000 psi

    20 3/4" - 3,000 psi

    Bore Protector

    VR Cover Flange 2 1/16" - 10,000 psi

    VR Cover Flange 2 1/16" - 5,000 psi

    DQ-22 Casing Hanger 13 5/8" x 9 5/8"

    DQ-22 Casing Hanger 20 3/4" x 13 3/8"

    Bleed Port

    Bleed Port

    Plastic Injection Ports

    Emergency Slip Hanger20 3/4" x 20"

    Adjustable Landing Ring with four 3" Outlets

    Casing Head 20 3/4" - 3,000 psi Radial Bolt Up

    x 20" Slip Hanger Down

    2" LP Bull Plug

    Casing Spool 13 5/8" - 10,000 psi Radial Bolt Top

    x 13 5/8" - 5,000 psi Radial Bolt Bottom

  • 5Starting head and intermediate CaSing Spool

    The standard DQ-22 Lowermost Casing Head is available with either a slip-on weld bottom with test port or with female casing threads. The upper connection is flanged, and can be offered in all standard API sizes and pressure ratings, with threaded or studded outlets. This casing head will accept the DQ-22 Automatic Slip-and-Seal Assembly for land use or the DQ-21P Mechanical-Set Seal Assembly for use over mudline suspen-sion. Two lockdown screws in the upper flange are optional for use with the bore protector. The flanged-by-flanged DQ-22 Intermediate Casing Head Spool has the DQ-22 Bowl and can accommodate the DQ-22 or the DQ-21P Casing Hangers. The secondary seal in the bottom of the casing head spool can be the standard integral double-P type seal or a remov-able reducer bushing with seals.

    Lowermost Casing Head and accessories

    Casing Spool and accessories

    Hangers, Ring Gaskets, Boltings and Gauges

    DQ-22 Intermediate Casing Spool pictured with standard double-P type bottom seal and studded side outlets

    DQ-21 Mechanically Set Slip-and-Seal Assembly for use over mudline suspension equipment or for light casing loads

    DQ-22 Lowermost Casing Head pictured with SOW bottom prep and threaded side outlets

    DQ-22 General Purpose Automatic Slip-and-Seal Assembly for moderate casing loads

  • 6heavy-duty CaSing/tuBing head

    The heavy-duty DQ-29 Lowermost Casing Head and Intermediate Casing/Tubing Spool are designed for high casing loads. The Dril-Quip DQ-29 Deep Bowl will accept all DQ series casing hangers. The standard secondary seal in the bottom of the spool is an integral double or single-P type, or an optional reducer bushing with seals. Lockdown screws in the top flange are optional for use with a bore protector, tubing hanger or casing hanger. When used as a tubing head, the DQ-29 Intermediate Spool can accommodate a DQ-1E Mandrel-Type Tubing Hanger for up to a 10-inch nominal bowl size. All Dril-Quip single completion tubing hangers are available in the 7-inch nominal bowl size.

    DQ-29 Lowermost Casing Head Deep Bowl for use with the DQ-29 Casing Hanger for high casing loads

    DQ-29 Automatic Heavy-Duty Slip-and-Seal Assembly designed for high casing loads (isolation seal optional)

    DQ-29 Intermediate Casing/Tubing Spool pictured with integral double-P type seal bottom, deep bowl, top flange with lockdown screws and studded side outlets

    Bore Protectors

    Bore Protector Running, Retrieving and Test Tools

    Tubing Spool and accessories

  • 7tuBing Spool adapterS and tuBing hangerS

    The DQ1A-EN Tubing Head Adapter is bored to accept and seal on the DQ-1E Type Extended-Neck Tubing Hanger utilizing double-P type seals. It can also be ported to access downhole safety equipment.

    The DQ1A-EN Extended-Neck Tubing Hanger has a slick neck and comes with type QH back pressure valve threads. It is recommended for high-pressure applications (5,000-10,000 psi) and can also be bored to access downhole safety equipment.

    The DQ-02 Tubing Head Adapter and Coupling are designed for use over a DQ-1W Tubing Hanger. Self-energizing seals between the adapter and coupling isolate the critical threads from the wellbore environment. The coupling has a standard QH back pressure valve thread and may be threaded for any type of tubing connection.

    Type DQH one-way Back Pressure Valve

    The DQ-1W Tubing Hanger is a slick joint wraparound hanger that provides a positive seal to full rated pressure. The DQ-1W seals off the annulus while circulating, setting the packer or installing the tree, and can be used in conjunction with the DQ-02 Tree Adapter and Coupling. The DQ-1W is available for 7-inch nominal tubing head bowl sizes.

    Two-way Back Pressure Valve

    Accessories

    Lubricator and accessories

    Tubing Spool, Tree Bonnet and Valves

    DL Gate Valve

  • manually operated gate valve

    *The Series DHS is the split gate version of the Series DH Gate ValvetypiCal appliCationS

    Surface BOP StackChoke and Kill Manifold

    Surface Completion TreesWellhead Systems

    Series DH/DHS* DM DL

    Pressure Ratings (psi) 2,000, 6,000, 10,000 and 15,000

    2,000, 3,000, 5,000 and 10,000

    2,000, 3,000 and 5,000

    Sizes 2 1/16" to 7 1/16" 2 1/16" to 7 1/16" 2 1/16" to 2 9/16"

    and 3 1/8"

    API Material Classification AA to HH AA to FF AA to DD

    Body Construction Forged Forged Forged or Cast

    Gate-to-Seat SealMetal-to-Metal with

    Tungsten Carbide Hardfacing

    Metal-to-Metal with Nitriding or Tungsten

    Carbide Hardfacing

    Resilient Face Seal

    Seat-to-Body SealPressure-Energized

    Metal-to-Metal with Teflon Secondary Seals

    Pressure-Energized Metal-to-Metal

    with Elastomeric Secondary Seals

    Elastomeric

    Bonnet-to-Body SealPressure-Energized

    Metal-to-MetalFlat Gasket

    Metal-to-MetalFlat Gasket

    Metal-to-Metal

    Stem Seal Spring-and Pressure-Energized Teflon

    Elastomeric Resilient

    8

    SerieS dh, dhS, dm and dl gate valveS

    SerieS dh, dhS, dm and dl gate valveSThe Dril-Quip series DH, DHS, DM, and DL Gate Valves are bidirectional sealing gate valves designed to offer maximum reliability for extended service in the field. All Dril-Quip gate valves are manufactured in accordance with API and ISO-9001 quality standards, and are available in four styles all qualified to API 6A PR2:

    SerieS dh gate valveBore sizes 2 1/16" through 7 1/16", and pressure ranges 2,000 to 15,000 psiMetal-to-metal seat seals, and nonelastomeric stem packingAvailable in API 6A material classes AA to HH, and PSL levels 2 to 4Fire-resistant designs per API 6FA and 6FC

    SerieS dhS gate valveBore sizes 2 1/16" through 7 1/16", and pressure ranges 2,000 to 15,000 psiMetal-to-metal seat seals, and nonelastomeric stem packingUnique split gate design reduces torque requirements and facilitates simultaneous testing of the upstream and downstream seats with the valve in the closed positionAvailable in API 6A material classes AA to HH, and PSL levels 2 to 4Fire-resistant designs per API 6FA and 6FC

    SerieS dm gate valveBore sizes 2 1/16" through 7 1/16", and pressure ranges 2,000 to 10,000 psiMetal-to-metal seat seals, and elastomer stem packingAvailable in API 6A material classes AA to FF, and PSL levels 2 to 4

    SerieS dl gate valveBore sizes 2 1/16", 2 9/16", and 3 1/8", and pressure ranges 2,000 to 5,000 psiResilient/elastomer seat seals, and resilient stem packingAvailable in API 6A material classes AA and DD, PSL levels 1 and 2

  • 9SpeCiFiCationS For api StudS, nutS and ring gaSketS

    Stud Bolt Length Table for 6B Flange Connections with R and RX Gaskets

    FlangeSize

    Length*

    LENGTH = 2(T + t + d) + S + 2(P)T Total flange thicknesst Plus tolerance for flange thicknessd Heavy hex nut thicknessS Flange face standoff (with "RX" gasket)P Point Maximum (1.5 x Pitch)

    BoltDiameter

    2 1/16 2M2 1/16 3M2 1/16 5M2 9/16 2M2 9/16 3M2 9/16 5M3 1/8 2M3 1/8 3M3 1/8 5M4 1/16 2M4 1/16 3M4 1/16 5M5 1/8 2M5 1/8 3M5 1/8 5M7 1/16 2M7 1/16 3M7 1/16 5M9 2M9 3M9 5M11 2M11 3M11 5M13 5/8 2M13 5/8 3M16 3/4 2M16 3/4 3M21 1/4 2M20 3/4 3M

    0.6250.8750.8750.7501.0001.0000.7500.8751.1250.8751.1251.2501.0001.2501.5001.0001.1251.3751.1251.3751.6251.2501.3751.8751.2501.3751.5001.6251.6252.000

    5.0006.5006.5005.5007.0007.0005.7506.5007.7506.5007.5008.5007.2508.25010.5007.5008.500

    11.2508.5009.500

    12.5009.250

    10.00014.250

    9.50010.75010.75012.25012.25015.000

    Size in. mm.

    Outside Diameter in. mm.

    Number of

    Bolts

    Diameter of

    Bolts, in. Length of Bolts in. mm.

    API RingNumber

    2,000 psi (13.8 MPa)working pressure

    3,000 psi (2.07 MPa)working pressure

    5,000 psi (34.5 MPa)working pressure

    "R" Gasket Standoff in. mm.

    2 1/162 9/163 1/84 1/165 1/87 1/16

    911

    13 5/816 3/4211/42 1/162 9/163 1/84 1/165 1/87 1/16

    911

    13 5/816 3/420 3/42 1/162 9/163 1/84 1/165 1/87 1/16

    911

    526578103130178228279346425540526578103130179228279346425527526578103130178228279

    6.507.508.25

    10.7513.0014.0016.5020.0022.0027.0032.00

    8.509.629.50

    11.5013.7515.0018.5021.5024.0027.7533.758.509.62

    10.5012.2514.7515.5019.0023.00

    165190210275330355420510560685815215245240295350380470545610705855215245270310375395485585

    88888

    12121620202488888

    12121620202088888

    121212

    5/8 3/4 3/4 7/811

    1 1/21 5/8 7/81

    7/81 1/8

    1 1/8

    1 3/81 5/8

    2 7/81

    1 1/81 1/41 1/21 3/8

    1 1/8

    1 1/41 1/4

    1 1/4

    1 3/81 3/8

    1 7/81 5/8

    55 1/4

    66 3/4

    78

    9101/411 3/4

    661/2

    77 3/4

    89

    9 1/210 1/411 3/4141/2

    661/271/4

    810

    10 3/412

    13 3/4

    4 1/2

    8 3/4

    6

    114127133152171178203222229260298152165152178197203229241260298368152165184203254273305349

    232631374145495357657324273137414549535766742427353944465054

    3/163/163/163/163/163/163/163/163/163/161/83/163/163/163/163/163/163/163/163/165/323/163/163/163/163/163/163/165/325/32

    4.84.84.84.84.84.84.84.84.84.83.34.84.84.84.84.84.84.84.84.84.14.84.84.84.84.84.84.84.14.1

    * Tolerance on bolt length:+ 1/8, -0 inch for lengths up to 12 inches+ 1/8, -0 inch for lengths up to 12 inches

    api type 6BX FlangeS

    FlangeSize

    Length*

    LENGTH = 2(T + t + d) + S + 2(P)T Total flange thicknesst Plus tolerance for flange thicknessd Heavy hex nut thicknessS Flange face standoff (with "RX" gasket)P Point Maximum (1.5 x Pitch)

    BoltDiameter

    2 1/16 2M2 1/16 3M2 1/16 5M2 9/16 2M2 9/16 3M2 9/16 5M3 1/8 2M3 1/8 3M3 1/8 5M4 1/16 2M4 1/16 3M4 1/16 5M5 1/8 2M5 1/8 3M5 1/8 5M7 1/16 2M7 1/16 3M7 1/16 5M9 2M9 3M9 5M11 2M11 3M11 5M13 5/8 2M13 5/8 3M16 3/4 2M16 3/4 3M21 1/4 2M20 3/4 3M

    0.6250.8750.8750.7501.0001.0000.7500.8751.1250.8751.1251.2501.0001.2501.5001.0001.1251.3751.1251.3751.6251.2501.3751.8751.2501.3751.5001.6251.6252.000

    5.0006.5006.5005.5007.0007.0005.7506.5007.7506.5007.5008.5007.2508.250

    10.5007.5008.500

    11.2508.5009.500

    12.5009.250

    10.00014.250

    9.50010.75010.75012.25012.25015.000

    Size in. mm.

    Outside Diameter in. mm.

    Number of

    Bolts

    Diameter of

    Bolts, in. Length of Bolts in. mm.

    API RingNumber

    2,000 psi (13.8 MPa)working pressure

    3,000 psi (2.07 MPa)working pressure

    5,000 psi (34.5 MPa)working pressure

    "R" Gasket Standoff in. mm.

    2 1/162 9/163 1/84 1/165 1/87 1/16

    911

    13 5/816 3/4211/42 1/162 9/163 1/84 1/165 1/87 1/16

    911

    13 5/816 3/420 3/42 1/162 9/163 1/84 1/165 1/87 1/16

    911

    526578

    103130178228279346425540526578

    103130179228279346425527526578

    103130178228279

    6.507.508.25

    10.7513.0014.0016.5020.0022.0027.0032.00

    8.509.629.50

    11.5013.7515.0018.5021.5024.0027.7533.758.509.62

    10.5012.2514.7515.5019.0023.00

    165190210275330355420510560685815215245240295350380470545610705855215245270310375395485585

    888881212162020248888812121620202088888121212

    5/8 3/4 3/4 7/811

    1 1/21 5/8 7/81

    7/81 1/8

    1 1/8

    1 3/81 5/8

    2 7/81

    1 1/81 1/41 1/21 3/8

    1 1/8

    1 1/41 1/4

    1 1/4

    1 3/81 3/8

    1 7/81 5/8

    55 1/4

    66 3/4

    78

    9101/411 3/4

    661/2

    77 3/4

    89

    9 1/210 1/411 3/4141/2

    661/271/4

    810

    10 3/412

    13 3/4

    4 1/2

    8 3/4

    6

    114127133152171178203222229260298152165152178197203229241260298368152165184203254273305349

    232631374145495357657324273137414549535766742427353944465054

    3/163/163/163/163/163/163/163/163/163/161/83/163/163/163/163/163/163/163/163/165/323/163/163/163/163/163/163/165/325/32

    4.84.84.84.84.84.84.84.84.84.83.34.84.84.84.84.84.84.84.84.84.14.84.84.84.84.84.84.84.14.1

    * Tolerance on bolt length:+ 1/8, -0 inch for lengths up to 12 inches+ 1/8, -0 inch for lengths up to 12 inches

  • 10

    api type 6BX FlangeS

    Sizes

    in. mm.

    Numberof

    Bolts

    Ouside Diameter

    in. mm.

    Diameterof

    Bolts, in.

    Length of Bolts

    in. mm.

    API RingNumber

    2,000 psi (13.8 MPa)working pressure

    3,000 psi (20.7 MPa)working pressure

    5,000 psi (34.5 MPa)working pressure

    10,000 psi (69.0 MPa)working pressure

    15,000 psi (103.5 MPa)working pressure

    20,000 psi (138.0 MPa)working pressure

    26 3/4 680

    762

    680

    762

    346

    425

    476

    540

    46

    52

    65

    78

    103

    130

    179

    228

    279

    346

    425

    476

    540

    46

    52

    65

    78

    103

    179

    228

    279

    346

    476

    46

    52

    65

    78

    103

    179

    228

    279

    346

    30

    18 3/4

    16 3/4

    13 5/8

    30

    26 3/4

    2 1/16

    1 13/16

    21 1/4

    7 1/16

    5 1/8

    4 1/16

    3 1/16

    2 9/16

    11

    9

    211/4

    1 13/16

    2 1/16

    2 9/16

    3 1/16

    4 1/16

    7 1/16

    9

    11

    13 5/8

    18 3/4

    1 13/16

    2 1/16

    2 9/16

    3 1/16

    4 1/16

    7 1/16

    9

    11

    13 5/8

    18 3/4

    16 3/4

    13 5/8

    41.00 1,040

    1,125

    1,100

    1,185

    675

    770

    905

    990

    190

    200

    230

    270

    315

    360

    479

    555

    655

    770

    870

    1,040

    1,145

    210

    220

    250

    290

    360

    505

    650

    815

    885

    1,160

    255

    285

    325

    355

    445

    655

    805

    880

    1,160

    44.19

    35.62

    30.38

    26.50

    46.68

    43.38

    7.88

    7.38

    39.00

    18.88

    14.06

    12.44

    10.62

    9.12

    25.75

    21.75

    45.00

    8.19

    8.75

    10.00

    11.31

    14.91

    19.88

    25.50

    32.00

    34.88

    45.75

    10.12

    11.31

    12.81

    14.06

    17.56

    25.81

    31.69

    34.75

    45.75

    40.94

    34.31

    30.25

    20

    32

    24

    32

    16

    16

    20

    24

    8

    8

    8

    8

    8

    12

    12

    16

    16

    20

    24

    24

    24

    8

    8

    8

    8

    8

    16

    16

    20

    20

    20

    8

    8

    8

    8

    8

    16

    16

    16

    20

    1 3/4

    1 5/8

    2

    1 7/8

    1 5/8

    2

    3/4

    3/4

    2

    1 1/2

    1 1/8

    1 1/8

    1

    7/8

    2 1/2

    7/87/8

    1

    1 1/8

    1 3/8

    1 1/2

    2

    2 1/4

    3

    1

    1 1/8

    1 1/4

    1 3/8

    1 3/4

    2

    3

    2 1/4

    1 7/8

    1 7/8

    1 7/8

    1 1/2

    1 3/4

    1 7/8

    2 1/2

    2 3/4

    13 3/4 350

    360

    430

    440

    315

    365

    440

    470

    130

    130

    150

    170

    200

    220

    285

    330

    380

    440

    440

    570

    620

    140

    150

    170

    190

    235

    325

    400

    490

    540

    680

    190

    210

    235

    255

    310

    445

    570

    605

    760

    17 1/2

    14 1/2

    12 1/2

    17

    5 1/4

    5

    18 3/4

    11 1/4

    8 3/4

    8

    6 3/4

    6

    15

    13

    24 1/2

    5 1/2

    6

    6 3/4

    7 1/2

    9 1/4

    12 3/4

    21 1/4

    26 3/4

    7 1/2

    8 1/4

    9 1/4

    10

    12 1/4

    17 1/2

    30

    22 1/4

    17 1/2

    17 1/4

    14 1/4

    17 3/4

    15 3/4

    19 1/4

    22 3/8

    23 3/4

    BX-167

    BX-303

    BX-168

    BX-303

    BX-160

    BX-162

    BX-163

    BX-165

    BX-151

    BX-152

    BX-153

    BX-154

    BX-155

    BX-169

    BX-156

    BX-157

    BX-158

    BX-159

    BX-162

    BX-164

    BX-166

    BX-151

    BX-152

    BX-153

    BX-154

    BX-155

    BX-156

    BX-157

    BX-158

    BX-159

    BX-164

    BX-151

    BX-152

    BX-153

    BX-154

    BX-155

    BX-156

    BX-157

    BX-158

    BX-159

    2,000 psi=138 bars, 3,000 psi=207 bars, 5,000 psi=345 bars, 10,000 psi=690 bars, 15,000 psi=1,035 bars, 20,000 psi=1,380 bars

  • DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT

    DRIL-QUIP, INC.OFFSHORE DRILLING AND PRODUCTION EQUIPMENT

    www.dril-quip.com 2011 Dril-Quip, inc. Printed in the USA 100412F

    DRIL-QUIP WESTERN HEMISPHERE DRIL-QUIP, INC. World Headquarters6401 North Eldridge Pkwy.Houston, Texas 77041Tel (713) 939 7711Fax (713) 939 8063

    DRIL-QUIP do Brasil, LTDA.Maca, BrazilTel (55) 22 2791 8950Fax (55) 22 2791 8989

    DRIL-QUIP New OrleansNew Orleans, LouisianaTel (504) 522 5566Fax (504) 522 4426

    DRIL-QUIP ASIA PACIFICDRIL-QUIP Asia Pacic Pte. Ltd.No. 80 Tuas West DriveSingapore, 638417Tel (65) 6861 0600Fax (65) 6861 5700DRIL-QUIP ChinaShekou, P. R. ChinaTel (86) 75 5268 97137Fax (86) 75 5268 97134

    DRIL-QUIP Oileld Services(Tianjin) Co., Ltd.Tanggu, Tianjin, P. R. ChinaTel (86) 22 2580 7466Fax (86) 22 2580 7130

    DRIL-QUIP MalaysiaKuala Lumpur, MalaysiaTel (60) 3 2168 4308Fax (60) 3 2168 4201

    D.Q. Holdings Pty., Ltd.Perth, AustraliaTel (61) 8 9322 8600Fax (61) 8 9322 8500

    DRIL-QUIP QatarDoha, QatarTel (974) 44389715Fax (974) 44417041

    DRIL-QUIP IndonesiaJakarta, IndonesiaTel (62) 21 720 0612Fax (62) 21 720 1513

    DRIL-QUIP Egypt Zahraa El-Maadi, Cairo, EgyptTel (20) 22 753 8809Fax (20) 22 753 8907

    Alexandria, EgyptTel (20) 3 450 0507Fax (20) 3 450 0508

    DRIL-QUIP Nigeria, Ltd.Port Harcourt, NigeriaTel (234) 84 463866Fax (234) 84 463649

    DRIL-QUIP (Ghana) Ltd.Takoradi, GhanaTel: (233) 312 5384

    DRIL-QUIP EASTERN HEMISPHEREDRIL-QUIP (Europe), Ltd.Stoneywood Park, DyceAberdeen, Scotland, UK AB21 7DZTel (44) 1224 727000Fax (44) 1224 727070DRIL-QUIP LondonHigh Wycombe, Bucks, EnglandTel (44) 1494 601086Fax (44) 1494 601094

    DRIL-QUIP NorwayStavanger, NorwayTel (47) 51 443700Fax (47) 51 443701

    DRIL-QUIP The NetherlandsBeverwijk, The NetherlandsTel (31) 251 22 9250Fax (31) 251 22 0044

    DRIL-QUIP DenmarkEsbjerg, DenmarkTel (45) 7518 0944Fax (45) 7518 0640