CA Workload Automation ESP Edition 11.4 CA RS … · RO77453 MANAGER IP ADDRESS IS NOT UPDATED AFTER FAILOVER PTF ... CA Workload Automation EE r11.3 ... CA Workload Automation ESP

CA Workload Automation ESP Edition 11.4 1

CA RS 1502 Service ListCA Workload Automation ESP Edition 11.4 1

CA RS 1502 Service List

Release Service Description Type

11.4 RO67329 LOST TRACKING FOR SOME JOBS IN JES3 PTF

RO69414 WORKSTATION SERVER ABEND878 PTF

RO70307 PERFORMANCE PROBLEM WITH SLOT FILE CACHING PTF

RO70483 APPLICATION SCOREBOARD KEEPS UNUSABLE ENTRIES PTF

RO71032 LOADAGDF SUBCOMMAND CONTINUATION ERROR NOT DETECTED PTF

RO71714 ZIIP ENABLED TERMINATION ABEND S0F8 IN TPSERVER PTF

RO71848 SAMPLES FOR WORKSTATION SERVER HTTPS CONNECTIONS PTF

RO73032 ABENDS322 OF UTILITY CYBESUT1 PTF

RO73109 WEB SERVICE UTILITY DEFAULT FOR SESSIONLIMIT CHANGED TO 1 PTF

RO73440 REMOVING INCOMPLETE EVENT NAMES FROM HISTORY REPORTING PTF

RO73633 ABEND0C4 IN MODULE CYBXG004 PTF

RO74209 CYBESUT8 DELETES RECORDS NOT MATCHING THE AGE PARAMETER PTF

RO75171 ESP ABEND SF9F PTF

RO75488 ZIIP ENABLED ESPWSS ABENDS WITH U3999, REASON CODE 8 PTF

RO75777 ESP AS A HOST COMMAND ENVIRONMENT IN REXX PTF

RO76270 ESP ABEND U2903 IN MODULE CYBXR001+1960 PTF

RO76583 SAP_JOB DOES NOT SUPPORT PURTUGUESE SPECIAL CHARACTERS PTF

RO77453 MANAGER IP ADDRESS IS NOT UPDATED AFTER FAILOVER PTF

RO77695 ENABLE BROWSING OF INSERTED JOB DEFINITIONS PTF

RO77946 ESP ABEND0C4 DUE TO MEMORY OVERLAY BY ENCORE SUBTASK PTF

The CA RS 1502 service count for this release is 20

CA Workload Automation ESP Edition 2

CA RS 1502 Service List for CD7YB40CA Workload Automation ESP Edition 2

CA RS 1502 Service List for CD7YB40

FMID Service Description Type

CD7YB40 RO67329 LOST TRACKING FOR SOME JOBS IN JES3 PTF

RO69414 WORKSTATION SERVER ABEND878 PTF

RO70307 PERFORMANCE PROBLEM WITH SLOT FILE CACHING PTF

RO70483 APPLICATION SCOREBOARD KEEPS UNUSABLE ENTRIES PTF

RO71032 LOADAGDF SUBCOMMAND CONTINUATION ERROR NOT DETECTED PTF

RO71714 ZIIP ENABLED TERMINATION ABEND S0F8 IN TPSERVER PTF

RO71848 SAMPLES FOR WORKSTATION SERVER HTTPS CONNECTIONS PTF

RO73032 ABENDS322 OF UTILITY CYBESUT1 PTF

RO73109 WEB SERVICE UTILITY DEFAULT FOR SESSIONLIMIT CHANGED TO 1 PTF

RO73440 REMOVING INCOMPLETE EVENT NAMES FROM HISTORY REPORTING PTF

RO73633 ABEND0C4 IN MODULE CYBXG004 PTF

RO74209 CYBESUT8 DELETES RECORDS NOT MATCHING THE AGE PARAMETER PTF

RO75171 ESP ABEND SF9F PTF

RO75488 ZIIP ENABLED ESPWSS ABENDS WITH U3999, REASON CODE 8 PTF

RO75777 ESP AS A HOST COMMAND ENVIRONMENT IN REXX PTF

RO76270 ESP ABEND U2903 IN MODULE CYBXR001+1960 PTF

RO76583 SAP_JOB DOES NOT SUPPORT PURTUGUESE SPECIAL CHARACTERS PTF

RO77453 MANAGER IP ADDRESS IS NOT UPDATED AFTER FAILOVER PTF

RO77695 ENABLE BROWSING OF INSERTED JOB DEFINITIONS PTF

RO77946 ESP ABEND0C4 DUE TO MEMORY OVERLAY BY ENCORE SUBTASK PTF

The CA RS 1502 service count for this FMID is 20


CA RS 1502 - PTF RO67329 DetailsCA Workload Automation ESP Edition 11.4 3

CA RS 1502 - PTF RO67329 Details

Release Service Details11.4 RO67329 RO67329 M.C.S. ENTRIES = ++PTF (RO67329)

LOST TRACKING FOR SOME JOBS IN JES3

PROBLEM DESCRIPTION:

ESP may lose track of some jobs, if multiple jobs with the

same name are submitted at the same time and the tracking

data comes in unexpected order.

This fix corrects the processing of tracking

data. This problem affects only jobs run under JES3.

SYMPTOMS:

There are multiple jobs with the same name

submitted at the same time on a JES3 system.

Some of these jobs will stay in SUBMITTED status

even though they have completed in JES3.

IMPACT:

ESP may lose track of some jobs.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:

CA Workload Automation EE r11.3

CA Workload Automation ESP Edition r11.4

Star Problem(s):

ESPWA 1488

Copyright (C) 2014 CA. All rights reserved. R00564-D7Y114-SP1

DESC(LOST TRACKING FOR SOME JOBS IN JES3).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO50241 RO55377 RO56050 RO63606 )

SUP ( RO54904 RO56897 RO57523 RO57689 RO58148 RO58198

RO59147 RO59158 RO59791 RO63648 TR54904 TR55951

TR56897 TR56900 TR56918 TR57523 TR57689 TR58148

TR58198 TR59147 TR59158 TR59299 TR59791 TR63517

TR63648 TR67329 )





WORKSTATION SERVER ABEND878


A memory leak in the CA11 interface can lead

to an S878 abend of the Workstation Server.

A similar memory leak exists in the TSO ESP

interface.

A memory leak in the processing of the RUN

RUN statement during simulation can also

lead to an S878 abend of the Workstation

Server.

SYMPTOMS:

Workstation Server abends with a S878.

IMPACT:

ESP Workstation users have to re-logon.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:

CA Workload Automation ESP Edition r11.4.

Star Problem(s):

ESPWA 1588


DESC(WORKSTATION SERVER ABEND878).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO50380 RO55270 RO56359 RO57146 RO57530 RO57764

RO59790 RO63606 RO63641 RO65145 RO67280 RO69059

RO69111 )


RO56977 RO57215 RO63655 RO65359 RO68311 TR51440

TR51488 TR51917 TR52533 TR52776 TR54110 TR54132

TR54217 TR56481 TR56814 TR56977 TR57052 TR57215

TR63655 TR65359 TR67914 TR68311 TR69414 )





PERFORMANCE PROBLEM WITH SLOT FILE CACHING


In the situation where there are ESP applications containing a large

number of jobs and the APPLFILE initialization parameter has CACHE

specified, ESP will have high CPU consumption processing the

cache. This can be observed using performance analysis tools.

The symptom is that CYBXI007 and CYBXI003 have high CPU usage.

SYMPTOMS:

ESP runs slowly, with high CPU consumption.

IMPACT:

ESP continues to function.

CIRCUMVENTION:

Not applicable.

PRODUCTS AFFECTED:



Star Problem(s):

ESPWA 1545


DESC(PERFORMANCE PROBLEM WITH SLOT FILE CACHING).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO57530 RO57764 RO62660 RO63606 RO66165 RO67015

RO69111 )


RO56916 RO57234 RO57345 RO57413 RO57528 RO58422

RO58436 RO59306 RO67379 RO67916 TR45665 TR48789

TR51846 TR51949 TR52128 TR52192 TR53881 TR54135

TR54997 TR55156 TR56370 TR56417 TR56916 TR57234

TR57240 TR57345 TR57413 TR57528 TR58081 TR58422

TR58436 TR59306 TR59472 TR65330 TR65855 TR67026

TR67207 TR67379 TR67458 TR67916 TR68056 TR70307

TR71002 TR71044 )





APPLICATION SCOREBOARD KEEPS UNUSABLE ENTRIES


A completed application can be accessed only if a record of it remains in

the job index file, which usually keeps 20 most recent generations of an

application. Application scoreboard entries are not deleted automatically

when the index record is discarded. A frequently run application can fill

the application monitor display with a large number of unneeded entries

and use a significant amount of memory in the ESP started task.

SYMPTOMS:

Hundreds of completed generations of an application appear in application

monitor display. Memory shortage (abend S878) in ESP started task if

PURGAPPL command is not used to clear the application scoreboard.

IMPACT:

Scoreboard is cluttered with unusable entries.

ESP abend after a long time without PURGAPPL.

CIRCUMVENTION:

PRODUCTS AFFECTED:



Star Problem(s):

ESPWA 1604


DESC(APPLICATION SCOREBOARD KEEPS UNUSABLE ENTRIES).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO57530 RO57764 RO62660 RO63606 RO67015 RO70307 )


RO57234 RO57528 RO58422 RO58436 RO58621 RO59306

RO67379 RO67916 TR48789 TR51846 TR51949 TR52128

TR52192 TR53881 TR54135 TR56370 TR56417 TR56916

TR57234 TR57240 TR57528 TR58081 TR58422 TR58436

TR58621 TR59306 TR65330 TR65855 TR67026 TR67379

TR67916 TR69966 TR70483 )





LOADAGDF SUBCOMMAND CONTINUATION ERROR NOT DETECTED


If a statement such as the following is specified in an AGENTDEF data set,

without a plus or minus continuation character in the first line -

AGENT WINAGENT HOST(135.54.72.1) PORT(1440) KEYNAME(WINAES)

TYPE('Window Agent')

then the second line is treated as a separate statement.

The error is not properly relayed to the LOADAGDF command processing the

AGENTDEF data set, so the agent is defined without the above TYPE tag.

This fix ensures that the error will be detected and the LOADAGDF command

will fail.

SYMPTOMS:

A multi-line AGENT statement with a missing continuation character in an

AGENTDEF data set may be processed with missing attributes by a LOADAGDF

command, instead of being flagged as an error.

IMPACT:

See SYMPTOMS section.

CIRCUMVENTION:

Add the missing continutation character to the AGENT statement in the

AGENTDEF data set and re-issue the LOADAGDF command.

PRODUCT(S) AFFECTED:


Star Problem(s):

ESPWA 1605


DESC(LOADAGDF SUBCOMMAND CONTINUATION ERROR NOT DETECTED).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO54033 RO58796 RO70180 )

SUP ( RO56101 RO67799 RO70989 TR56101 TR65392 TR67123

TR67799 TR68529 TR70989 TR71000 TR71028 TR71032 )





ZIIP ENABLED TERMINATION ABEND S0F8 IN TPSERVER


If a zIIP enabled master subsystem running TP Server is stopped because

the system was removed from the sysplex or because an XCF STOP GROUP

command was issued to a proxy subsystem in the same XCF group as the

master subsystem, then the master subsystem will abend with code S0F8.

SYMPTOMS:

Master subsystem abend S0F8 on termination.

IMPACT:

Master subsystem outage was intentional but abend may cause concern.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1637


DESC(ZIIP ENABLED TERMINATION ABEND S0F8 IN TPSERVER).

++VER (Z038)

FMID (CD7YB40)

SUP ( TR71714 )





SAMPLES FOR WORKSTATION SERVER HTTPS CONNECTIONS


The following samples are provided to assist users who wish to connect

to Workstation Server from a Web based client using the HTTPS protocol:

CYBSSL00: Sample AT/TLS configuration statements for TCP/IP Policy

Agent (PAGENT) to support Workstation Server HTTPS

connections.

CYBSSL01: Sample JCL to create digital certificates and key rings for

Workstation Server HTTPS connections using IBM Security

Server (RACF).

CYBSSL03: Sample JCL to create digital certificates and key rings for

Workstation Server HTTPS connections using CA Top Secret.

SYMPTOMS:

None.

IMPACT:

None.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1641


DESC(SAMPLES FOR WORKSTATION SERVER HTTPS CONNECTIONS).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO59341 RO62717 RO70737 RO71169 )

SUP ( TR71007 TR71848 )





ABENDS322 OF UTILITY CYBESUT1


A batch job running utility CYBESUT1 may abend with S322.

If parameter TIME=1440 is used in the JCL of the job, it may

also abend with S878 if a limited region is in effect.

These abends occur if the JOBINDEX data set contains a

very high number of application generation entries for

the completed applications. In the reported issues this

number reached several millions.

When CYBESUT1 is run without the SUBSYSTEM parameter to generate a

report but not update the data sets, and subsystems using the same

data sets are active, the SYSPRINT report may be inaccurate and false

error messages may be generated, as the data sets are not being

serialized by CYBESUT1. When this occurs, CYBESUT1 will print the

following warning in the SYSPRINT report -

*** WARNING ***

* If ESP subsystems using the above JOBINDEX and APPLFILE data sets are

* active, then the following report may be inaccurate, and may include

* false error messages, as the data sets are not properly serialized.

* If so, rerun this job specifying the SUBSYSTEM(<ssid>) parameter,

* where <ssid> specifies the name of an ESP subsystem running on the

* same system as this job.

SYMPTOMS:

ABENDS322, ABENDS878.

In a big enough region with TIME=1440, the job may run for

several hours.

IMPACT:

Inability to use utility CYBESUT1.

CIRCUMVENTION:

Run utility CYBESUT7 to clean up old application generation entries.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1625


DESC(ABENDS322 OF UTILITY CYBESUT1).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO59341 RO67015 )

SUP ( RO67082 RO70808 TR66552 TR67082 TR70808 TR71927

TR73032 )





WEB SERVICE UTILITY DEFAULT FOR SESSIONLIMIT CHANGED TO 1


The default value of the SESSIONLIMIT configuration parameter of the

CYBESWS1 Workstation Server web service utility is changed from 500

to 1, which is usually the desired value. SESSIONLIMIT is the total

number of times that the utility repeats sending a web service request

to Workstation Server.

SYMPTOMS:

None.

IMPACT:

This modification spares users from having to set SESSIONLIMIT if 1

is acceptable, which is usually true.

CIRCUMVENTION:

None.


CA ESP WORKLOAD AUTOMATION Release 11.4

Star Problem(s):

ESPWA 1649


DESC(WEB SERVICE UTILITY DEFAULT FOR SESSIONLIMIT CHANGED TO 1).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO70737 )

SUP ( TR73109 )





REMOVING INCOMPLETE EVENT NAMES FROM HISTORY REPORTING


After adding the EVENT field to the History Reporting criteria, the events

that were triggered before applying the RO72634 Enhancement are displayed

with the GROUP names only, followed by a period.

SYMPTOMS:

Event names are displayed as only GROUP names, followed by a period.

IMPACT:

Event names are displayed as only GROUP names, followed by a period.

CIRCUMVENTION:

N/A



Star Problem(s):

ESPWA 1652


DESC(REMOVING INCOMPLETE EVENT NAMES FROM HISTORY REPORTING).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO63606 RO72634 )

SUP ( TR73440 )





ABEND0C4 IN MODULE CYBXG004


ABEND0C4 will occur in module CYBXG004 if memory in ESP region

is exhausted. It happens when ESP tries to obtain a buffer for

a subsystem request. This fix allows ESP to re-use an old buffer.

SYMPTOMS:

ABEND0C4 in module CYBXG004.

IMPACT:

ESP outage.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1654


DESC(ABEND0C4 IN MODULE CYBXG004).

++VER (Z038)

FMID (CD7YB40)

SUP ( RO67515 TR67515 TR73633 )





CYBESUT8 DELETES RECORDS NOT MATCHING THE AGE PARAMETER


Utility CYBESUT8 may delete job records with entries that don't match the

AGE parameter. This happens when the field of the job end time in every

entry of a job record in the JOBSTATS file is not filled in. The utility

deletes such a record regardless of the date of its definition. This fix

takes into consideration the date of the record's definition.

SYMPTOMS:

CYBESUT8 deletes the records created after the date calculated based on the

value of parameter AGE.

IMPACT:

Confusing report of utility CYBESUT8.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1655


DESC(CYBESUT8 DELETES RECORDS NOT MATCHING THE AGE PARAMETER).

++VER (Z038)

FMID (CD7YB40)

SUP ( BC57905 RO69803 TR69803 TR74209 )





ESP ABEND SF9F


During shutdown, some tasks in a ZIIP enabled ESP address space terminate

without waiting for a stop request from the dispatcher. There is a time

window when the dispatcher may post an already terminated task, causing SF9F

abend.

SYMPTOMS:

ESP ABEND SF9F.

IMPACT:

ESP outage.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1658


DESC(ESP ABEND SF9F).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO51349 RO58385 )

SUP ( TR75171 )





ZIIP ENABLED ESPWSS ABENDS WITH U3999, REASON CODE 8


A zIIP-enabled Workstation Server (WSS) will abend with U3999-8

and subsequent U914 if a Workstation user attempts to generate

and sort a history report. This fix corrects the problem.

SYMPTOMS:

The Workstation Server (WSS) is zIIP-enabled and it abends

with U3999 and subsequent U914.

IMPACT:

The Workstation Server users have to re-logon.

CIRCUMVENTION:

Specify ZIIPEXCL COMMCHAN in WSSPARM of a zIIP-enabled Workstation Server.

Or, run Workstation Server in a non-zIIP mode.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1659


DESC(ZIIP ENABLED ESPWSS ABENDS WITH U3999, REASON CODE 8).

++VER (Z038)

FMID (CD7YB40)

SUP ( RO70005 TR60808 TR62036 TR65499 TR70005 TR75488 )





ESP AS A HOST COMMAND ENVIRONMENT IN REXX


This enhancement provides the ability to use ESP command processor as a

host command environment in REXX. It is intended for use in REXX programs

under CA OPS/MVS. The module name representing the command environment is

CYBJS052. When configured, the command processor can be invoked in REXX

using the ADDRESS instruction:

ADDRESS ESP "<initparms>; <cmd1>; <cmd2>; ..."

<initparms> string specifies the target subsystem id and, optionally, other

parameters acceptable in the PARM field of an ESP batch job.

<cmd1>, <cmd2>, ... are commands to be executed.

The response messages will be placed on the REXX data stack.

This example displays information about the checkpoint and the track file:

ADDRESS ESP "SUBSYS(ESPP) MASTER; LISTCKPT; LISTTRAK"

SAY "ESP RC =" RC

DO QUEUED()

PULL LINE

SAY LINE

END

The MASTER keyword in the initparms string requests routing of commands to

the master, so the master's checkpoint will be shown even if the specified

subsystem id belongs to a proxy. The MASTER keyword works only if XCF

command routing is enabled (requires the High Availability or the Service

Governor option).

SYMPTOMS:

IMPACT:

CIRCUMVENTION:

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1661


DESC(ESP AS A HOST COMMAND ENVIRONMENT IN REXX).

++VER (Z038)

FMID (CD7YB40)

SUP ( TR75777 )





ESP ABEND U2903 IN MODULE CYBXR001+1960


ESP may intermittently abend with code U2903 in module CYBXR001 when

Event Level Sensors Manager is processing an incoming AFM.

The code defect was located in one of the Storage Manager's routines in

module CYBXR001.

SYMPTOMS:

ESP abend U2903 with a dump titled

CCSR010E CYBXD000 U2903 at 107A2960 LMOD CYBXR001 CSECT CYBXR001 +001960 ESPM

IMPACT:

ESP outage.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1666


DESC(ESP ABEND U2903 IN MODULE CYBXR001+1960).

++VER (Z038)

FMID (CD7YB40)


SUP ( RO57700 TR55430 TR55614 TR57700 TR76270 )





SAP_JOB DOES NOT SUPPORT PURTUGUESE SPECIAL CHARACTERS


SAP_JOB workload object does not support Portuguese special characters. This

fix enables 26 special Portuguese characters which can be used by SAP_JOB

statements.

SYMPTOMS:

Special Portuguese characters are not allowed in the scope of SAP_JOB

statements.

IMPACT:

A SAP_JOB workload object is not built.

CIRCUMVENTION:

Do not use special characters.



Star Problem(s):

ESPWA 1667


DESC(SAP_JOB DOES NOT SUPPORT PURTUGUESE SPECIAL CHARACTERS).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO62660 RO63641 )

SUP ( RO67037 TR67037 TR76351 TR76583 )





MANAGER IP ADDRESS IS NOT UPDATED AFTER FAILOVER


The IP address obtained by ESP for the MANAGER initialization parameter in

the Agent Definition Table is not updated after the Master subsystem fails

over the Shadow.

This happens if the LOADAGDF command is not used, and the agent definition

structures are loaded from the COMMQ file.

This fix addresses the case when the TCPIP parameter is omitted in the

MANAGER initialization parameter.

SYMPTOMS:

A response from the MGRADDR command issued after the failover will show an

IP address of the system, where the Master has run before the failover.

The WOBs submitted before the failover will stop receiving AFMs from the

agents, resulting in the loss of tracking.

IMPACT:

Disruption of the workload flow.

CIRCUMVENTION:

If possible, manually execute the LOADAGDF command referring to the correct

Agent Definition Table.

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1670


DESC(MANAGER IP ADDRESS IS NOT UPDATED AFTER FAILOVER).

++VER (Z038)

FMID (CD7YB40)


SUP ( RO65468 TR65468 TR76456 TR77453 )

++HOLD (RO77453) SYSTEM FMID(CD7YB40)

REASON (ACTION ) DATE (15015)

COMMENT (

+----------------------------------------------------------------------+

| CA ESP WORKLOAD AUTOMATION Release 11.4 |

+----------+-----------------------------------------------------------+

|SEQUENCE | After Apply |

+----------+-----------------------------------------------------------+

|PURPOSE | To activate this fix. |

+----------+-----------------------------------------------------------+

|USERS | All. |

|AFFECTED | |

+----------+-----------------------------------------------------------+

|KNOWLEDGE | ESP Agent processing. |

|REQUIRED | |

+----------+-----------------------------------------------------------+

|ACCESS | OPER authority. |

|REQUIRED | |

+----------+-----------------------------------------------------------+

**************************

* STEPS TO PERFORM *

**************************

Please execute the LOADAGDF command either manually or by having it

coded in the init parm member.

).





ENABLE BROWSING OF INSERTED JOB DEFINITIONS

Enable browsing of inserted job definitions


Jobs inserted into an active application via IW or APPLINS command are

defined using ESP procedure language. The text of the definitions is stored

in the application record but the BP command in CSF does not show it. This

enhancement enables display of inserted text by BP (Browse Procedure)

command.

SYMPTOMS:

BP line command in CSF is rejected for an IW-inserted job.

IMPACT:

CIRCUMVENTION:

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1671


DESC(ENABLE BROWSING OF INSERTED JOB DEFINITIONS).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO50380 RO55270 RO67280 RO69414 )

SUP ( RO54132 RO54217 RO56977 RO63655 TR52533 TR54110

TR54132 TR54217 TR56814 TR56977 TR63655 TR76562

TR77695 )





ESP ABEND0C4 DUE TO MEMORY OVERLAY BY ENCORE SUBTASK


When ENCPARM MODIFY COMPRESS(YES) is in

effect and the ESP Encore subtask encounters

a job with thousands of DD statements, a

random memory overlay may occur causing

various abends, most likely ABEND0C4.

SYMPTOMS:

Various abends, most likely ABEND0C4.

IMPACT:

ESP outage; inability to restart a job with thousands of DD statements.

CIRCUMVENTION:

Use ENCPARM MODIFY COMPRESS(NO).

PRODUCTS AFFECTED:


Star Problem(s):

ESPWA 1613


DESC(ESP ABEND0C4 DUE TO MEMORY OVERLAY BY ENCORE SUBTASK).

++VER (Z038)

FMID (CD7YB40)

PRE ( RO49741 )

SUP ( RO57604 RO61964 TR57604 TR61964 TR66208 TR70176

TR77158 TR77946 )

Documents

CA Workload Automation ESP Edition 11.4 CA RS … · RO77453 MANAGER IP ADDRESS IS NOT UPDATED AFTER FAILOVER PTF ... CA Workload Automation EE r11.3 ... CA Workload Automation ESP