Upload
duongngoc
View
215
Download
0
Embed Size (px)
Citation preview
CA Workload Automation CA 7 Edtion 11.3 1
CA RS 1306 Service ListCA Workload Automation CA 7 Edtion 11.3 1
CA RS 1306 Service List
Release Service Description Hiper
11.3 RO52392 SASSJCKI - LJCK REPORT 2 SHIFTED / JCLCHECK 11.0
RO52578 AES256 ENCRYPTION ENHANCEMENT
RO52585 ENHANCED FLOW STATUS NOTIFICATION
RO52586 ENHANCED FLOW STATUS NOTIFICATION
RO52679 MODCB ERROR ON CA7AGNT VSAM FILE - DEBUG DATA
RO53097 ALLOW JCL INCLUDE STMTS IN CA7TOUNI PRE-CONVERSION
RO53102 USSF BPX1STA (FILE STATUS) CALL RC NOT DISPLAYED
RO53556 SASSSCM4 - /DELAGNT COMMAND PERFORMANCE.
RO53740 ENHANCED FLOW STATUS NOTIFICATION
RO53948 SASSDT10 - EXCESSIVE DBT BATCH RUN TIMES
RO54513 CA7TOUNI SET STATEMENT ISSUE
RO55018 CA7TOUNI PRE-CONVERSION S013-4C ABEND
RO55111 SASSSM27 - CONVERTED AGENT JOB INFO MISSING WITH LJOB CMD.
RO55172 CA7 TANDEM AGENT ENHANCEMENT
RO55173 CA7 TANDEM AGENT ENHANCEMENT
RO55212 JFM CORRECTIONS AND IMPROVEMENTS
RO55213 JFM CORRECTIONS AND IMPROVEMENTS
RO55280 SASSSLI5 - LRLOG,LIST=CPU SHOWS XP EXTERNAL JOBS
RO55904 SASSICOM - ICOM D=XU83 FOR SASSXU83 DISPLAY
RO55931 CAIASCON - /IAS,FUNC=RECONFIG COMMAND UPDATED WITH GARBAGE
RO55983 SASSSCMD - DISPLAY THE DATASET NAMES OF THE LOG FILES
RO56067 PREDICTFLOWS(Y) JFM INCORRECTLY LOADS THE FLOW
RO56293 SASSARFF - JOB STUCK IN REQQ AFTER ARF CANCEL
RO58135 SASSUSD4 - TYPE=EDIT WITH DD ERRORS
RO58253 SASSUSD4 - RE-FIT CHANGES FOR ARFOVER=YES **HIPER**
RO58316 L2JFMIGR - UTILITY TO EXTRACT CA 7 JOB LAST RUN DATE/TIME
RO59371 FIX RO58316 DOES NOT HAVE A PRE FOR RO51292
The CA RS 1306 service count for this release is 27
CA Workload Automation CA 7 Edtion 11.1 2
CA RS 1306 Service ListCA Workload Automation CA 7 Edtion 11.1 2
CA RS 1306 Service List
Release Service Description Hiper
11.1 NO-SRVC CA RS 1306 Contains No Service For This Release of This Product.
The CA RS 1306 service count for this release is 0
CA Workload Automation CA 7 Edtion 3
CA RS 1306 Service List for CAL2B30CA Workload Automation CA 7 Edtion 3
CA RS 1306 Service List for CAL2B30
FMID Service Description Hiper
CAL2B30 RO52392 SASSJCKI - LJCK REPORT 2 SHIFTED / JCLCHECK 11.0
RO52578 AES256 ENCRYPTION ENHANCEMENT
RO52585 ENHANCED FLOW STATUS NOTIFICATION
RO52679 MODCB ERROR ON CA7AGNT VSAM FILE - DEBUG DATA
RO53097 ALLOW JCL INCLUDE STMTS IN CA7TOUNI PRE-CONVERSION
RO53556 SASSSCM4 - /DELAGNT COMMAND PERFORMANCE.
RO53948 SASSDT10 - EXCESSIVE DBT BATCH RUN TIMES
RO54513 CA7TOUNI SET STATEMENT ISSUE
RO55018 CA7TOUNI PRE-CONVERSION S013-4C ABEND
RO55111 SASSSM27 - CONVERTED AGENT JOB INFO MISSING WITH LJOB CMD.
RO55172 CA7 TANDEM AGENT ENHANCEMENT
RO55212 JFM CORRECTIONS AND IMPROVEMENTS
RO55280 SASSSLI5 - LRLOG,LIST=CPU SHOWS XP EXTERNAL JOBS
RO55904 SASSICOM - ICOM D=XU83 FOR SASSXU83 DISPLAY
RO55983 SASSSCMD - DISPLAY THE DATASET NAMES OF THE LOG FILES
RO56293 SASSARFF - JOB STUCK IN REQQ AFTER ARF CANCEL
RO58135 SASSUSD4 - TYPE=EDIT WITH DD ERRORS
RO58253 SASSUSD4 - RE-FIT CHANGES FOR ARFOVER=YES **HIPER**
The CA RS 1306 service count for this FMID is 18
CA Workload Automation CA 7 Edtion 4
CA RS 1306 Service List for CAL2B31CA Workload Automation CA 7 Edtion 4
CA RS 1306 Service List for CAL2B31
FMID Service Description Hiper
CAL2B31 RO52586 ENHANCED FLOW STATUS NOTIFICATION
RO55173 CA7 TANDEM AGENT ENHANCEMENT
RO55213 JFM CORRECTIONS AND IMPROVEMENTS
RO56067 PREDICTFLOWS(Y) JFM INCORRECTLY LOADS THE FLOW
RO58316 L2JFMIGR - UTILITY TO EXTRACT CA 7 JOB LAST RUN DATE/TIME
RO59371 FIX RO58316 DOES NOT HAVE A PRE FOR RO51292
The CA RS 1306 service count for this FMID is 6
CA Workload Automation CA 7 Edtion 5
CA RS 1306 Service List for CCPMB00CA Workload Automation CA 7 Edtion 5
CA RS 1306 Service List for CCPMB00
FMID Service Description Hiper
CCPMB00 RO53740 ENHANCED FLOW STATUS NOTIFICATION
The CA RS 1306 service count for this FMID is 1
CA Workload Automation CA 7 Edtion 6
CA RS 1306 Service List for CD51B00CA Workload Automation CA 7 Edtion 6
CA RS 1306 Service List for CD51B00
FMID Service Description Hiper
CD51B00 RO53102 USSF BPX1STA (FILE STATUS) CALL RC NOT DISPLAYED
The CA RS 1306 service count for this FMID is 1
CA Workload Automation CA 7 Edtion 7
CA RS 1306 Service List for CIASB00CA Workload Automation CA 7 Edtion 7
CA RS 1306 Service List for CIASB00
FMID Service Description Hiper
CIASB00 RO55931 CAIASCON - /IAS,FUNC=RECONFIG COMMAND UPDATED WITH GARBAGE
The CA RS 1306 service count for this FMID is 1
CA Workload Automation CA 7 Edtion 11.3 8
CA RS 1306 - PTF RO52392 DetailsCA Workload Automation CA 7 Edtion 11.3 8
CA RS 1306 - PTF RO52392 Details
Release Service Details11.3 RO52392 RO52392 M.C.S. ENTRIES = ++PTF (RO52392)
SASSJCKI - LJCK REPORT 2 SHIFTED / JCLCHECK 11.0
PROBLEM DESCRIPTION:
The output of a JCLCHECK can have the JCL shifted
to the right. The problem occurs with JCLCHECK
release 11.0.
SYMPTOMS:
LJCK output shifted.
IMPACT:
low.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2853
Copyright (C) 2012 CA. All rights reserved. R00560-AL2113-SP1
DESC(SASSJCKI - LJCK REPORT 2 SHIFTED / JCLCHECK 11.0) .
++VER (Z038)
FMID (CAL2B30)
SUP ( RO50946 TR50946 TR52392 )
CA Workload Automation CA 7 Edtion 11.3 9
CA RS 1306 - PTF RO52578 DetailsCA Workload Automation CA 7 Edtion 11.3 9
CA RS 1306 - PTF RO52578 Details
Release Service Details11.3 RO52578 RO52578 M.C.S. ENTRIES = ++PTF (RO52578)
AES256 ENCRYPTION ENHANCEMENT
PROBLEM DESCRIPTION:
CA 7 R11.3 now supports communication with CA WA Agents using AES
256-bit encryption. Encryption definitions in the IASCRYPT DD may now
have 64-character keys and specify TYPE(AES256) to indicate to use the
larger encryption type. Agent definitions should point to these new
encryption definitions.
This enhancement requires an update to CA IAS R11.0 and CA 7 R11.3 and
that an agent using AES256 be defined to the instance.
SYMPTOMS: New code
IMPACT: New code
CIRCUMVENTION: None
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA Integrated Agent Services Release 11.0
Star Problem(s):
7 2849
Copyright (C) 2013 CA. All rights reserved. R00563-AL2113-SP1
DESC(AES256 ENCRYPTION ENHANCEMENT) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO18825 RO30845 RO49540 )
SUP ( TR52578 )
++HOLD (RO52578) SYSTEM FMID(CAL2B30)
REASON (ENH ) DATE (13029)
COMMENT (
This provides a new interface capabilities with CA Workload Automation
agents using 256-bit AES encryption. Associated data may be retrieved
from CA Support Online on the CA WA CA 7 Edition Product Page.
A CA WA agent using 256-bit AES encryption must be obtained and
installed on the appropriate system in order for this enhancement to
function.
).
CA Workload Automation CA 7 Edtion 11.3 10
CA RS 1306 - PTF RO52585 DetailsCA Workload Automation CA 7 Edtion 11.3 10
CA RS 1306 - PTF RO52585 Details
Release Service Details11.3 RO52585 RO52585 M.C.S. ENTRIES = ++PTF (RO52585)
ENHANCED FLOW STATUS NOTIFICATION
PROBLEM DESCRIPTION:
This enhancement lets CPM track CA Workload Automation SE critical path
flows even when the starting job of the flow fails to reach the CA Workload
Automation SE ready queue. This feature is referred to as Predictive CPM.
The feature requires using the CA Workload Automation SE JFM component with
the new PREDICTFLOWS option enabled.
Before Predictive CPM, critical path flows are recognized only when the
starting job enters the ready queue. Assume a starting job stays in the
request queue or does not enter the workload. In this case, the flow is
never created (or tracked) in CPM.
Now, you can enable the Predictive CPM option with the new JFM keyword,
PREDICTFLOWS(YES) on the MONITOR statement. With this keyword enabled, JFM
can determine that a job in its forecast window will initiate a flow. JFM
creates the flow in CPM at one of the following times:
- When the job enters the request queue.
- When JFM detects that the anticipated Deadline Time for the starting
job has passed and the job has not yet entered the request queue.
For detailed information on the implementation of this feature please refer
to the 'Predictive CPM' documentation connected to the CA Workload
Automation CA 7 Edition product support page on the CA Support website.
SYMPTOMS:
See above.
IMPACT:
Latencies in Critical Path Monitoring can result in missed SLAs
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2834
Copyright (C) 2013 CA. All rights reserved. R00564-AL2113-SP1
DESC(ENHANCED FLOW STATUS NOTIFICATION) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO15787 RO15865 RO26878 RO30845 RO31276 RO34695
RO35030 RO42741 RO46400 )
SUP ( TR52585 )
++IF FMID(CAL2B31) REQ(RO52586) .
CA Workload Automation CA 7 Edtion 11.3 11
CA RS 1306 - PTF RO52586 DetailsCA Workload Automation CA 7 Edtion 11.3 11
CA RS 1306 - PTF RO52586 Details
Release Service Details11.3 RO52586 RO52586 M.C.S. ENTRIES = ++PTF (RO52586)
ENHANCED FLOW STATUS NOTIFICATION
PROBLEM DESCRIPTION:
This enhancement lets CPM track CA Workload Automation SE critical path
flows even when the starting job of the flow fails to reach the CA Workload
Automation SE ready queue. This feature is referred to as Predictive CPM.
The feature requires using the CA Workload Automation SE JFM component with
the new PREDICTFLOWS option enabled.
Before Predictive CPM, critical path flows are recognized only when the
starting job enters the ready queue. Assume a starting job stays in the
request queue or does not enter the workload. In this case, the flow is
never created (or tracked) in CPM.
Now, you can enable the Predictive CPM option with the new JFM keyword,
PREDICTFLOWS(YES) on the MONITOR statement. With this keyword enabled, JFM
can determine that a job in its forecast window will initiate a flow. JFM
creates the flow in CPM at one of the following times:
- When the job enters the request queue.
- When JFM detects that the anticipated Deadline Time for the starting
job has passed and the job has not yet entered the request queue.
For detailed information on the implementation of this feature please refer
to the 'Predictive CPM' documentation connected to the CA Workload
Automation CA 7 Edition product support page on the CA Support website.
SYMPTOMS:
See above.
IMPACT:
Latencies in Critical Path Monitoring can result in missed SLAs
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2834
Copyright (C) 2013 CA. All rights reserved. R00564-AL2113-SP1
DESC(ENHANCED FLOW STATUS NOTIFICATION) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO15500 RO16142 RO16322 RO16978 RO17094 RO17882
RO18082 RO18166 RO18605 RO18693 RO19578 RO19590
RO20161 RO20311 RO20480 RO20490 RO20737 RO21084
RO21231 RO21395 RO21645 RO21672 RO21855 RO31277
RO34778 RO51292 RO52129 )
SUP ( RO16310 RO16741 RO18054 RO18057 RO18125 RO18759
RO18763 RO18766 RO19724 RO19907 RO20234 RO20291
RO20332 RO20353 RO20612 RO20849 RO20878 RO20959
RO32273 RO33609 RO33793 TR15131 TR15182 TR15196
TR16310 TR16741 TR18054 TR18057 TR18125 TR18759
TR18763 TR18766 TR19724 TR19907 TR20231 TR20234
TR20291 TR20332 TR20353 TR20612 TR20849 TR20878
TR20959 TR32273 TR33609 TR33793 TR52586 )
++IF FMID(CAL2B30) REQ(RO52585) .
CA Workload Automation CA 7 Edtion 11.3 12
CA RS 1306 - PTF RO52679 DetailsCA Workload Automation CA 7 Edtion 11.3 12
CA RS 1306 - PTF RO52679 Details
Release Service Details11.3 RO52679 RO52679 M.C.S. ENTRIES = ++PTF (RO52679)
MODCB ERROR ON CA7AGNT VSAM FILE - DEBUG DATA
PROBLEM DESCRIPTION:
The following error may occur during heavy agent
job processing:
CAL2I773E CA7AGNT MODCB ERROR
This results in a U0760 abend. Note that there may
be other conditions that could result in a U0760
abend, and this fix contains code to fix some of
these problems, and also give more debug data in
the WTOs that can occur.
SYMPTOMS:
Usually a U0760 abend.
IMPACT:
Possible CA 7 outage.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2859
Copyright (C) 2013 CA. All rights reserved. R00566-AL2113-SP1
DESC(MODCB ERROR ON CA7AGNT VSAM FILE - DEBUG DATA) .
++VER (Z038)
FMID (CAL2B30)
SUP ( RO49028 TR49028 TR52679 )
CA Workload Automation CA 7 Edtion 11.3 13
CA RS 1306 - PTF RO53097 DetailsCA Workload Automation CA 7 Edtion 11.3 13
CA RS 1306 - PTF RO53097 Details
Release Service Details11.3 RO53097 RO53097 M.C.S. ENTRIES = ++PTF (RO53097)
ALLOW JCL INCLUDE STMTS IN CA7TOUNI PRE-CONVERSION
PROBLEM DESCRIPTION:
The CA7TOUNI pre-conversion utility does not accept JCL INCLUDE
statements, nor does it accept SET statements that span lines or SET
statements containing multiple name/value pairs on a single line.
Code will be updated to support valid SET statements. Code will
also be updated to support simple INCLUDE statement processing
as follows:
1) Nested INCLUDE statements will not be processed. For
example if INCLUDE MEMBER(A) has a JCL statement for
INCLUDE MEMBER(B), the job will fail pre-conversion
processing. As long as the INCLUDE member does not
nest other INCLUDE statement, it will be processed.
2) The INCLUDE member must reside in a library that is
part of a JCLLIB statement that is part of the CA7TOUNI
JCL. The utility will not search JES2 PROCLIBs or
the **JOBPARM PROCLIB= keyword value.
SYMPTOMS:
Pre-Conversion can fail with one of the messages below.
*** ERROR *** MEMBER XXXXXXXX SYSIN DD ALLOCATION FAILED FOR YYYYYYYY
XXXXXXXX is the member name and YYYYYYYY is the dataset name.
*** ERROR *** MEMBER XXXXXXXX SYSIN DSN IS INVALID, CANNOT PROCESS
THIS MEMBER.
IMPACT:
Similar to those described above.
CIRCUMVENTION:
Change the JCL
1) Have a single SET statement per line.
2) Remove the INCLUDE statements and imbed the actual JCL in the
CA7TOUNI job.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2852
Copyright (C) 2013 CA. All rights reserved. R00570-AL2113-SP1
DESC(ALLOW JCL INCLUDE STMTS IN CA7TOUNI PRE-CONVERSION) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO48084 RO51564 )
SUP ( RO42295 RO51697 TR42295 TR51697 TR53097 )
++HOLD (RO53097) SYSTEM FMID(CAL2B30)
REASON (DOC ) DATE (13003)
COMMENT (
*** WARNING *** MEMBER xxxxxxxx CONTAINS TOO MANY SET STATEMENTS
TO BE FULLY PARSED
Reason:
This message indicates input PDSDD member xxxxxxxx contained
more JCL SET statements that the pre-conversion utility could
process.
Action:
Generally this will not be a problem as there will be other
more severe problems if a SET statement needed to resolve
a symbolic variable cannot be found. Check the output
for this job in the OUNIJCL DD statement to ensure all the
necessary CA7TOUNI statements are present.
*** WARNING *** MEMBER xxxxxxxx CONTAINS TOO MANY JCLLIB ENTRIES
TO BE FULLY PARSED
Reason:
This message indicates input PDSDD member xxxxxxxx contained
more than 16 JCLLIB entries.
Action:
Generally this will not be a problem as long as any INCLUDE
statements can be resolved. Check the output for this job
CA Workload Automation CA 7 Edtion 11.3 14
CA RS 1306 - PTF RO53097 Details
Release Service Detailsin the OUNIJCL DD statement to ensure all the necessary
CA7TOUNI statements are present.
*** ERROR *** MEMBER xxxxxxxx SUBSTITUTION ERROR. CANNOT PROCESS
THIS MEMBER.
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a symbolic that could not be resolved.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, determine if the symbolic is incorrect or a SET
statement for the symbolic is missing or invalid.
*** ERROR *** MEMBER xxxxxxxx SYSIN DD FIND ERROR FOR yyyyyyyyyy.
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a PDS data set name and member (yyyyyyyyyy) in the SYSIN DD
concatenation that could not be found.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, determine if the member exists and is in the correct
library.
*** ERROR *** MEMBER xxxxxxxx HAS INCLUDE MEMBER BUT NO JCLLIB
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a JCL INCLUDE statement but no JCLLIB statement.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, add a JCLLIB statement for the data set containing
the INCLUDE member. The pre-conversion utility will only
search the JCLLIB concatenation for INCLUDE members.
*** ERROR *** MEMBER xxxxxxxx HAS SYSIN DD SET STATEMENTS
Reason:
This message indicates input PDSDD member xxxxxxxx contained
SET statements in the SYSIN DD concatenation.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, move the SET statements before the SYSIN DD
statement. SET statements are not valid in a SYSIN concatenation.
*** ERROR *** MEMBER xxxxxxxx HAS NESTED INCLUDE STATEMENTS
Reason:
This message indicates input PDSDD member xxxxxxxx contained
nested INCLUDE statements.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, copy the data contained in the nested INCLUDE member
to an existing data set. The pre-conversion utility
only processes single level INCLUDE members. INCLUDE members
that contain additional JCL INCLUDE statements will fail
processing.
*** ERROR *** MEMBER xxxxxxxx INCLUDE JCLLIB ALLOC. FAILED FOR
yyyyyyyyy
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a JCLLIB statement with a data set (yyyyyyyyyy) that could not
be allocated.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, correct the data set entry in the JCLLIB
concatenation.
*** ERROR *** MEMBER xxxxxxxx INCLUDE JCLLIB OPEN FAILED FOR
CA Workload Automation CA 7 Edtion 11.3 15
CA RS 1306 - PTF RO53097 Details
Release Service Detailsyyyyyyyyy
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a JCLLIB statement with a data set (yyyyyyyyyy) that could not
be opened
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, determine why the data set could not be opened and
correct the problem.
*** ERROR *** INCLUDE MEMBER xxxxxxxx NOT FOUND IN JCLLIB
Reason:
This message indicates input PDSDD member xxxxxxxx contained
an INCLUDE member that could not be found in the JCLLIB
concatenation
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, add the INCLUDE member to a data set in the
JCLLIB concatenation.
*** ERROR *** MEMBER xxxxxxxx SYMBOLIC ERROR. CANNOT PROCESS
THIS MEMBER
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a JCL SET statement that could not be resolved.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, fix the JCL SET statement.
*** ERROR *** MEMBER xxxxxxxx JCLLIB ERROR. CANNOT PROCESS
THIS MEMBER
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a JCLLIB statement that could not be resolved.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, fix the JCLLIB statement.
*** ERROR *** MEMBER xxxxxxxx HAS NESTED SYSIN DD DATA SETS
Reason:
This message indicates input PDSDD member xxxxxxxx contained
a SYSIN DD data set containing a line of data pointing to
another data set.
Action:
Determine whether you want to process the member. If you do not
need to convert the job, ignore the message and continue.
Otherwise, copy the data in the nested data set into the
data set that was pointing to it.
).
CA Workload Automation CA 7 Edtion 11.3 16
CA RS 1306 - PTF RO53102 DetailsCA Workload Automation CA 7 Edtion 11.3 16
CA RS 1306 - PTF RO53102 Details
Release Service Details11.3 RO53102 RO53102 M.C.S. ENTRIES = ++PTF (RO53102)
USSF BPX1STA (FILE STATUS) CALL RC NOT DISPLAYED
PROBLEM DESCRIPTION:
GTS does not show the BPX1STA (file status) Return code and Reason code
and currently only displays the vague message CAGSUF206W.
A new message, CAGSUF214I, now shows the RC and reason code to allow the
customer to figure out the Unix problem.
Return codes from the RACROUTE (Security calls) were not displayed and this
PTF adds displaying the RC with "F gts,SYSTEM SECTRACE(ON)".
Note: This is the GTS r11.0 version of GTS r1.1 PTF RO50668
SYMPTOMS:
CAGSUF206W USSF BPX1STA detected an error processing path _name_
IMPACT:
GTS USSF function fails to issue the command the customer wants
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Generalized Transaction Server Release 11.0
Star Problem(s):
GTS 54
Copyright (C) 2013 CA. All rights reserved. R00034-D51110-SP1
DESC(USSF BPX1STA (FILE STATUS) CALL RC NOT DISPLAYED) .
++VER (Z038)
FMID (CD51B00)
SUP ( TR53102 )
++HOLD (RO53102) SYSTEM FMID(CD51B00)
REASON (DOC ) DATE (13051)
COMMENT (
New messages: |
|
CAGS01261I Userid: uuuuuuuu CART: cccccccc cccccccc |
|
This message only shown when System level debugging is turned on |
and shows information on the userid assigned for a GTS command. |
|
|
CAGS01271I Security trace has been turned on| off |
|
This message is in response to the "F gts,SYSTEM SECTRACE(ON| OFF) |
command. |
|
|
CAGS01272I Security trace is on| off |
|
This message is in response to the "F gts,SYSTEM SECTRACE(STATUS) |
command. |
|
|
CAGS01281I General Transaction Server version _ |
CAGS01282I ARMREGISTER(___) ARMPOLICY(________) |
CAGS01283I DEBUG(___) ID(_________) |
CAGS01284I SECCLASS(________) SECPREFIX(_________) |
CAGS01285I XMEM(___) XCF(___) TCP(___) |
CAGS01286I Token: _________ _________ _________ _________ |
CAGS01287I System ID: ________ SYSPLEX: ________ |
CAGS01288I Connected to JES ____ (SUB=MSTR) |
|
These messages are issued in response to the "F gts,SYSTEM INFO" |
command. |
|
CA Workload Automation CA 7 Edtion 11.3 17
CA RS 1306 - PTF RO53102 Details
Release Service Details
|
CAGS01291I DD Name Type |
CAGS01291I -------- ---- |
CAGS01291I ddname info |
|
These messages are issued in response to the "F gts,SYSTEM SHOWDD" |
command. |
|
CAGS01292I ADD| DEL for DD=dddddddd RC=#### |
|
This message is issued in response to the "F gts,SYSTEM DIAGADD(dd)"|
or "F gts,SYSTEM DIAGDEL(dd)" commands. |
|
Note: Typically these commands are only issued at the request of CA |
support. |
|
|
CAGS01293I DD dddddddd not deleted (freed), is not Dummy |
CAGS01294I DD dddddddd not freed, it is not allocated |
CAGS01295I DD dddddddd already allocated |
CAGS01296I DD dddddddd is restricted and not freed |
|
These messages are issued in response to the |
"F gts,SYSTEM DIAGADD(dd)" or or "F gts,SYSTEM DIAGDEL(dd)" commands|
when an error occurs. |
|
Note: Typically these commands are only issued at the request of CA |
support. |
|
|
CAGS00100I nnnnnnnn tttttttttttttttt RC=rrrrrrrr RSN=rrrrrrrrr |
|
This generic message is issued to show the Return code and reason |
for function nnnnnnnn of type tttttttttttttttt. |
|
This message may be issued as a multi-line WTO with additional lines|
show information about the function call. |
|
This information is usually meant for CA Support in researching a |
problem and maybe only seen in a diagnostic or tracing mode. |
|
|
CAGSUF212I USSF BPX1STA RETVAL=rrrrrrrrr Time=________ - ___ |
|
This message shows the results of the BPX1STA API call when in |
USSF debug mode. |
|
|
CAGSUF213I USSF GT@RESCH RCA=rrrrrrrrr MSEC=_________ |
|
This message is shown when in USSF debug mode with information for |
CA support. |
|
|
CAGSUF214I USSF BPX1STA RC=rrrrrrrrr (rrrrrrrrrr) REASON=rrrrrrrrrr |
|
CA Workload Automation CA 7 Edtion 11.3 18
CA RS 1306 - PTF RO53102 Details
Release Service Details
This message is shown when unexpected errors occur from a BPX1STA |
API call. |
|
|
CAGSUF127I File: fffff |
CAGSUF127I CMD: ccccccccc |
CAGSUF127I ----- |
|
These messages are issued in response to a "F gts,USSF INFO" command|
to show the files being tracked by the GTS USSF function. Only |
the first 1024 files are shown. |
|
).
CA Workload Automation CA 7 Edtion 11.3 19
CA RS 1306 - PTF RO53556 DetailsCA Workload Automation CA 7 Edtion 11.3 19
CA RS 1306 - PTF RO53556 Details
Release Service Details11.3 RO53556 RO53556 M.C.S. ENTRIES = ++PTF (RO53556)
SASSSCM4 - /DELAGNT COMMAND PERFORMANCE.
PROBLEM DESCRIPTION:
The /DELAGNT,UPDATE=YES command can take a long
time to process. There can also be some severe
performance problems within CA 7 while the command
processes. Note that if the UPDATE=YES option is
not used, then there should not be any performance
problems, either with or without this fix.
SYMPTOMS:
Bad performance in CA 7.
IMPACT:
Can cause delays in CA 7 processing.
CIRCUMVENTION:
Do not use the /DELAGNT command with UPDATE=YES.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2866
Copyright (C) 2013 CA. All rights reserved. R00572-AL2113-SP1
DESC(SASSSCM4 - /DELAGNT COMMAND PERFORMANCE.) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO18966 )
SUP ( RO31029 RO52540 TR31029 TR51767 TR52540 TR53556 )
CA Workload Automation CA 7 Edtion 11.3 20
CA RS 1306 - PTF RO53740 DetailsCA Workload Automation CA 7 Edtion 11.3 20
CA RS 1306 - PTF RO53740 Details
Release Service Details11.3 RO53740 RO53740 M.C.S. ENTRIES = ++PTF (RO53740)
ENHANCED FLOW STATUS NOTIFICATION
PROBLEM DESCRIPTION:
Alert to be raised if a CA 7 flow's starting job has not started by
its deadline start time. This alert will be raised under the
following conditions:
1) JFM used for CPM monitoring
2) PREDICTFLOWS(Y) option set in JFM
3) Flow is loaded when the JFM window advances and the starting job
has not been submitted by its deadline start time.
When flow is loaded, CPM will issue CPM1602I message, status of flow
is "Missed_start"
SYMPTOMS:
CPM client does not know that a flow fails to start when expected.
IMPACT:
See above.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Critical Path Monitor Release 11.0
Star Problem(s):
CPM 52
Copyright (C) 2013 CA. All rights reserved. R00040-CPM110-SP1
DESC(ENHANCED FLOW STATUS NOTIFICATION) .
++VER (Z038)
FMID (CCPMB00)
PRE ( RO15702 RO20235 RO20793 RO22184 RO34328 RO34480 )
SUP ( TR53740 )
CA Workload Automation CA 7 Edtion 11.3 21
CA RS 1306 - PTF RO53948 DetailsCA Workload Automation CA 7 Edtion 11.3 21
CA RS 1306 - PTF RO53948 Details
Release Service Details11.3 RO53948 RO53948 M.C.S. ENTRIES = ++PTF (RO53948)
SASSDT10 - EXCESSIVE DBT BATCH RUN TIMES
PROBLEM DESCRIPTION:
The DBT process can experience a long run time for
CA 7 data bases that are large. This can be caused
by the automatically generated RQMT and TRIG
commands for the BTI steps. These commands are not
usually needed, and this change will cause them to
not be generated. If there are any concerns about
possible data base pointer problems, then you can
run a separate BTI with just the RQMT and TRIG
commands.
SYMPTOMS:
Excessive DBT processing time.
IMPACT:
Low.
CIRCUMVENTION:
Remove the RQMT and TRIG cards.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2873
Copyright (C) 2013 CA. All rights reserved. R00577-AL2113-SP1
DESC(SASSDT10 - EXCESSIVE DBT BATCH RUN TIMES) .
++VER (Z038)
FMID (CAL2B30)
SUP ( TR53948 )
CA Workload Automation CA 7 Edtion 11.3 22
CA RS 1306 - PTF RO54513 DetailsCA Workload Automation CA 7 Edtion 11.3 22
CA RS 1306 - PTF RO54513 Details
Release Service Details11.3 RO54513 RO54513 M.C.S. ENTRIES = ++PTF (RO54513)
CA7TOUNI SET STATEMENT ISSUE
PROBLEM DESCRIPTION:
CA7TOUNI Pre-conversion utility can take a S0C1 abend if a SET variable
is set to NULL and that variable is used in a dataset or member name.
Also, utility will not resolve compound SET statements.
SYMPTOMS:
Pre-conversion utility abends with a S0C1. Also, utility does not resolve
compound SET statements.
IMPACT:
Minor.
CIRCUMVENTION:
Remove NULL SET variables.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2876
Copyright (C) 2013 CA. All rights reserved. R00581-AL2113-SP1
DESC(CA7TOUNI SET STATEMENT ISSUE) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO48084 RO51564 RO53097 )
SUP ( RO42295 TR42295 TR54513 )
CA Workload Automation CA 7 Edtion 11.3 23
CA RS 1306 - PTF RO55018 DetailsCA Workload Automation CA 7 Edtion 11.3 23
CA RS 1306 - PTF RO55018 Details
Release Service Details11.3 RO55018 RO55018 M.C.S. ENTRIES = ++PTF (RO55018)
CA7TOUNI PRE-CONVERSION S013-4C ABEND
PROBLEM DESCRIPTION:
The CA7TOUNI pre-conversion utility can take a S013 abend when JCLLIB
data sets or SYSIN DD data sets have different DCB characteristics
SYMPTOMS:
CA7TOUNI pre-conversion utility can take a S013-4C abend pointing
to DD CX2PIDDN or CSYSNDDN
IMPACT:
This will only affect sites with JCLLIB data sets having different
DCB characteristics or sites reading in SYSIN DD statements having
different DCB characteristics.
CIRCUMVENTION:
Change JCL so that data sets have the same DCB characteristics.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2880
Copyright (C) 2013 CA. All rights reserved. R00589-AL2113-SP1
DESC(CA7TOUNI PRE-CONVERSION S013-4C ABEND) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO51564 RO53097 )
SUP ( RO51697 TR51697 TR55018 )
CA Workload Automation CA 7 Edtion 11.3 24
CA RS 1306 - PTF RO55111 DetailsCA Workload Automation CA 7 Edtion 11.3 24
CA RS 1306 - PTF RO55111 Details
Release Service Details11.3 RO55111 RO55111 M.C.S. ENTRIES = ++PTF (RO55111)
SASSSM27 - CONVERTED AGENT JOB INFO MISSING WITH LJOB CMD.
PROBLEM DESCRIPTION:
When a job has been converted from an XPJOB to an AGENT job type
the LJOB display for the resulting job can be incomplete
if it has 50 or more requirements. The job definition is correct,
it is just not displayed correctly with LJOB.
SYMPTOMS:
LJOB command is not showing the Agent information of a converted
XPJOB.
IMPACT:
This will only occur if you are converting an XPJOB with more than
50 requirements or more.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2881
Copyright (C) 2013 CA. All rights reserved. R00591-AL2113-SP1
DESC(SASSSM27 - CONVERTED AGENT JOB INFO MISSING WITH LJOB CMD.) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO20801 RO48644 RO53017 )
SUP ( TR55111 )
CA Workload Automation CA 7 Edtion 11.3 25
CA RS 1306 - PTF RO55172 DetailsCA Workload Automation CA 7 Edtion 11.3 25
CA RS 1306 - PTF RO55172 Details
Release Service Details11.3 RO55172 RO55172 M.C.S. ENTRIES = ++PTF (RO55172)
CA7 TANDEM AGENT ENHANCEMENT
PROBLEM DESCRIPTION: CA-7 R11.3 now supports the new CA Workload
Automation Agent for HP Integrity NonStop R11.3.1. The NONSTOP_JOB
agent job type defines a job that will be sent to the HP Integrity
NonStop platform for execution. This requires an update to CA IAS
R11.0 and that the CA Workload Automation Agent be installed on the
HP Integrity NonStop system.
SYMPTOMS: New code
IMPACT: New code
CIRCUMVENTION: None
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA Integrated Agent Services Release 11.0
Star Problem(s):
7 2784
Copyright (C) 2013 CA. All rights reserved. R00592-AL2113-SP1
DESC(CA7 TANDEM AGENT ENHANCEMENT) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO15468 RO15552 RO15865 RO16657 RO16898 RO18945
RO18966 RO19051 RO20801 RO20958 RO27333 RO30845
RO31843 RO32830 RO34533 RO37930 RO43922 RO46158
RO48644 RO50013 RO51291 RO52200 RO52540 RO52585
RO53017 RO53556 RO53716 )
SUP ( RO22933 RO23891 RO27842 RO28475 RO31029 RO31495
RO36956 RO37474 RO47777 RO48785 RO49028 RO50841
RO52679 RO54372 RO55111 TR14217 TR22933 TR23891
TR27842 TR28475 TR31029 TR31495 TR36956 TR37474
TR45866 TR46386 TR47374 TR47767 TR47777 TR48146
TR48785 TR49028 TR49271 TR50832 TR50841 TR52679
TR54372 TR54632 TR55111 TR55172 )
++IF FMID(CAL2B31) REQ(RO55173) .
++HOLD (RO55172) SYSTEM FMID(CAL2B30)
REASON (ENH ) DATE (13052)
COMMENT (
This provides a new interface to the new CA Workload Automation Agent
for HP Integrity NonStop r11.3.1. Associated data may be retrieved
from CA Support Online on the CA WA CA 7 Edition Product Page.
The new NONSTOP_JOB agent type provides the ability to run a command
script or file on an HP NonStop system.
The CA WA HP Integrity NonStop r11.3.1 agent must be obtained and
installed on the appropriate system in order for this enhancement to
function.
).
CA Workload Automation CA 7 Edtion 11.3 26
CA RS 1306 - PTF RO55173 DetailsCA Workload Automation CA 7 Edtion 11.3 26
CA RS 1306 - PTF RO55173 Details
Release Service Details11.3 RO55173 RO55173 M.C.S. ENTRIES = ++PTF (RO55173)
CA7 TANDEM AGENT ENHANCEMENT
PROBLEM DESCRIPTION: CA-7 R11.3 now supports the new CA Workload
Automation Agent for HP Integrity NonStop R11.3.1. The NONSTOP_JOB
agent job type defines a job that will be sent to the HP Integrity
NonStop platform for execution. This requires an update to CA IAS
R11.0 and that the CA Workload Automation Agent be installed on the
HP Integrity NonStop system.
SYMPTOMS: New code
IMPACT: New code
CIRCUMVENTION: None
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA Integrated Agent Services Release 11.0
Star Problem(s):
7 2784
Copyright (C) 2013 CA. All rights reserved. R00592-AL2113-SP1
DESC(CA7 TANDEM AGENT ENHANCEMENT) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO15905 RO17042 RO19590 RO20737 RO20960 RO21231
RO21395 RO31277 RO51292 RO52586 )
SUP ( RO18153 TR18153 TR45867 TR46387 TR47375 TR48147
TR49272 TR50563 TR51251 TR51303 TR54633 TR55173 )
++IF FMID(CAL2B30) REQ(RO55172) .
++HOLD (RO55173) SYSTEM FMID(CAL2B31)
REASON (ENH ) DATE (13052)
COMMENT (
This provides a new interface to the new CA Workload Automation Agent
for HP Integrity NonStop r11.3.1. Associated data may be retrieved
from CA Support Online on the CA WA CA 7 Edition Product Page.
The new NONSTOP_JOB agent type provides the ability to run a command
script or file on an HP NonStop system.
The CA WA HP Integrity NonStop r11.3.1 agent must be obtained and
installed on the appropriate system in order for this enhancement to
function.
).
CA Workload Automation CA 7 Edtion 11.3 27
CA RS 1306 - PTF RO55212 DetailsCA Workload Automation CA 7 Edtion 11.3 27
CA RS 1306 - PTF RO55212 Details
Release Service Details11.3 RO55212 RO55212 M.C.S. ENTRIES = ++PTF (RO55212)
JFM CORRECTIONS AND IMPROVEMENTS
PROBLEM DESCRIPTION:
This enhancement contains updates to the CA 7 Jobflow Monitor (JFM) to
provide extended functionality and a number of corrections and improvements.
SYMPTOMS:
None. It should be applied if you are using CA 7 JFM for any reason.
IMPACT:
Medium
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA 7 r11.3
Star Problem(s):
7 2864
Copyright (C) 2013 CA. All rights reserved. R00595-AL2113-SP1
DESC(JFM CORRECTIONS AND IMPROVEMENTS) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO16937 RO20305 RO24189 RO25552 RO27049 RO28418
RO31276 RO32912 RO46400 RO48471 RO48716 )
SUP ( AR28418 RO16008 RO28857 TR16008 TR28857 TR55212 )
++IF FMID(CAL2B31) REQ(RO55213) .
CA Workload Automation CA 7 Edtion 11.3 28
CA RS 1306 - PTF RO55213 DetailsCA Workload Automation CA 7 Edtion 11.3 28
CA RS 1306 - PTF RO55213 Details
Release Service Details11.3 RO55213 RO55213 M.C.S. ENTRIES = ++PTF (RO55213)
JFM CORRECTIONS AND IMPROVEMENTS
PROBLEM DESCRIPTION:
This enhancement contains updates to the CA 7 Jobflow Monitor (JFM) to
provide extended functionality and a number of corrections and improvements.
SYMPTOMS:
None. It should be applied if you are using CA 7 JFM for any reason.
IMPACT:
Medium
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA 7 r11.3
Star Problem(s):
7 2864
Copyright (C) 2013 CA. All rights reserved. R00595-AL2113-SP1
DESC(JFM CORRECTIONS AND IMPROVEMENTS) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO15905 RO16142 RO16322 RO16741 RO17042 RO17094
RO18082 RO18605 RO18686 RO18693 RO18759 RO19590
RO19961 RO20161 RO20234 RO20291 RO20311 RO20480
RO20737 RO20849 RO20959 RO21084 RO21231 RO21395
RO21645 RO22398 RO31277 RO51292 RO52129 RO52586
RO55173 )
SUP ( RO18057 RO20332 RO20878 RO32273 TR15182 TR18057
TR20332 TR20878 TR32273 TR55213 )
++IF FMID(CAL2B30) REQ(RO55212) .
CA Workload Automation CA 7 Edtion 11.3 29
CA RS 1306 - PTF RO55280 DetailsCA Workload Automation CA 7 Edtion 11.3 29
CA RS 1306 - PTF RO55280 Details
Release Service Details11.3 RO55280 RO55280 M.C.S. ENTRIES = ++PTF (RO55280)
SASSSLI5 - LRLOG,LIST=CPU SHOWS XP EXTERNAL JOBS
PROBLEM DESCRIPTION:
Command LRLOG,LIST=CPU mistakenly includes cross-platform
externally tracked jobs. Cross-platform jobs are not
considered CPU jobs.
SYMPTOMS:
Cross-platform externally tracked jobs appear in the output.
IMPACT:
See above.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2885
Copyright (C) 2013 CA. All rights reserved. R00596-AL2113-SP1
DESC(SASSSLI5 - LRLOG,LIST=CPU SHOWS XP EXTERNAL JOBS) .
++VER (Z038)
FMID (CAL2B30)
SUP ( TR55280 )
CA Workload Automation CA 7 Edtion 11.3 30
CA RS 1306 - PTF RO55904 DetailsCA Workload Automation CA 7 Edtion 11.3 30
CA RS 1306 - PTF RO55904 Details
Release Service Details11.3 RO55904 RO55904 M.C.S. ENTRIES = ++PTF (RO55904)
SASSICOM - ICOM D=XU83 FOR SASSXU83 DISPLAY
PROBLEM DESCRIPTION:
This change will allow a reply to ICOM of D=XU83.
The output from ICOM for a D=XU83 will be a WTO for
each entry in the SASSXU83 table. The WTO prefix
is CA-7.586 followed by XU83 and either EXCLUDE or
INCLUDE, followed by JOB= or DD= or DSN= .
Note that any existing SASSXU83 table does not have
to be re-ASM for this change to work.
SYMPTOMS:
none.
IMPACT:
Low.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2872
Copyright (C) 2013 CA. All rights reserved. R00599-AL2113-SP1
DESC(SASSICOM - ICOM D=XU83 FOR SASSXU83 DISPLAY) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO16937 RO18778 RO32622 RO44203 )
SUP ( RO34032 RO42638 RO45885 TR34032 TR42638 TR45885
TR53897 TR54797 TR55904 )
CA Workload Automation CA 7 Edtion 11.3 31
CA RS 1306 - PTF RO55931 DetailsCA Workload Automation CA 7 Edtion 11.3 31
CA RS 1306 - PTF RO55931 Details
Release Service Details11.3 RO55931 RO55931 M.C.S. ENTRIES = ++PTF (RO55931)
CAIASCON - /IAS,FUNC=RECONFIG COMMAND UPDATED WITH GARBAGE
PROBLEM DESCRIPTION:
The agentparm.txt parm communication.managerid_1 is filled with
garbage values if you include commented lines with continuations.
SYMPTOMS:
This problem was caused by not handling a commented line
with a continuation ( - or + ) sign.
IMPACT:
Garbage values placed in the communication.managerid fields.
CIRCUMVENTION:
Do not include a continuation sign ( - or + ) on a commented line.
PRODUCT(S) AFFECTED: CA Interactive Agent Services Release 11.0
CA Workload Automation SE Release 11.3
Star Problem(s):
IAS 55
Copyright (C) 2013 CA. All rights reserved. R00070-IAS110-SP1
DESC(CAIASCON - /IAS,FUNC=RECONFIG COMMAND UPDATED WITH GARBAGE) .
++VER (Z038)
FMID (CIASB00)
PRE ( RO38710 RO52577 )
SUP ( RO37711 TR14098 TR14697 TR14883 TR37711 TR55931 )
CA Workload Automation CA 7 Edtion 11.3 32
CA RS 1306 - PTF RO55983 DetailsCA Workload Automation CA 7 Edtion 11.3 32
CA RS 1306 - PTF RO55983 Details
Release Service Details11.3 RO55983 RO55983 M.C.S. ENTRIES = ++PTF (RO55983)
SASSSCMD - DISPLAY THE DATASET NAMES OF THE LOG FILES
PROBLEM DESCRIPTION:
Current /DISPLAY,DB=LOG command is not showing
the data set names of the primary and secondary log files.
SYMPTOMS:
It is not easy to find out the actual data set
names of the log files.
IMPACT:
None.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2869
Copyright (C) 2013 CA. All rights reserved. R00601-AL2113-SP1
DESC(SASSSCMD - DISPLAY THE DATASET NAMES OF THE LOG FILES) .
++VER (Z038)
FMID (CAL2B30)
SUP ( TR55983 )
CA Workload Automation CA 7 Edtion 11.3 33
CA RS 1306 - PTF RO56067 DetailsCA Workload Automation CA 7 Edtion 11.3 33
CA RS 1306 - PTF RO56067 Details
Release Service Details11.3 RO56067 RO56067 M.C.S. ENTRIES = ++PTF (RO56067)
PREDICTFLOWS(Y) JFM INCORRECTLY LOADS THE FLOW
PROBLEM DESCRIPTION:
JFM incorrectly loads the flow if you use PREDICTFLOWS(Y) and define
a flow with an ending schid of 0. As a result, the flow shows as
'NO PATH'.
SYMPTOMS:
PREDICTFLOWS(Y) is not interpreting the ending schid of 0 properly.
IMPACT:
Flow shows as 'NO PATH'.
CIRCUMVENTION:
Do not define a critical path flow(CPM) with an ending schid of 0.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2892
Copyright (C) 2013 CA. All rights reserved. R00603-AL2113-SP1
DESC(PREDICTFLOWS(Y) JFM INCORRECTLY LOADS THE FLOW) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO15500 RO18693 RO19590 RO20161 RO20480 RO20849
RO20959 RO21084 RO21395 RO21645 RO21672 RO31277
RO51292 RO52129 RO52586 )
SUP ( RO33609 TR33609 TR56067 )
CA Workload Automation CA 7 Edtion 11.3 34
CA RS 1306 - PTF RO56293 DetailsCA Workload Automation CA 7 Edtion 11.3 34
CA RS 1306 - PTF RO56293 Details
Release Service Details11.3 RO56293 RO56293 M.C.S. ENTRIES = ++PTF (RO56293)
SASSARFF - JOB STUCK IN REQQ AFTER ARF CANCEL
PROBLEM DESCRIPTION:
A job can get stuck in the REQQ during completion
processing. The problem can occur if a previous
job with the same CA 7 job number but different
jobname, got canceled with an ARFSET using a
FINAL DISP of 'C'.
SYMPTOMS:
Job hung in REQQ.
IMPACT:
Job's completion not done.
CIRCUMVENTION:
Use ARFP command.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2887
Copyright (C) 2013 CA. All rights reserved. R00608-AL2113-SP1
DESC(SASSARFF - JOB STUCK IN REQQ AFTER ARF CANCEL) .
++VER (Z038)
FMID (CAL2B30)
SUP ( TR56293 )
CA Workload Automation CA 7 Edtion 11.3 35
CA RS 1306 - PTF RO58135 DetailsCA Workload Automation CA 7 Edtion 11.3 35
CA RS 1306 - PTF RO58135 Details
Release Service Details11.3 RO58135 RO58135 M.C.S. ENTRIES = ++PTF (RO58135)
SASSUSD4 - TYPE=EDIT WITH DD ERRORS
PROBLEM DESCRIPTION:
It is a keyword processing problem when executing CA 7 in batch with
the TYPE=EDIT parm. An error caused verification to go beyond the
requested syntax checking. As a result, one or more WTOs are issued
warning about a missing DD statement for the SERVICEDESK keyword.
SYMPTOMS:
Missing SERVICEDESK DD statement WTO during offline run of UCC7.
IMPACT:
False feedback on offline verification output.
CIRCUMVENTION:
Include DD statement for ServiceDesk rules file, or remove keyword.
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 2894
Copyright (C) 2013 CA. All rights reserved. R00624-AL2113-SP1
DESC(SASSUSD4 - TYPE=EDIT WITH DD ERRORS) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO48632 )
SUP ( TR58135 )
CA Workload Automation CA 7 Edtion 11.3 36
CA RS 1306 - PTF RO58253 DetailsCA Workload Automation CA 7 Edtion 11.3 36
CA RS 1306 - PTF RO58253 Details
Release Service Details11.3 RO58253 RO58253 M.C.S. ENTRIES = ++PTF (RO58253)
SASSUSD4 - RE-FIT CHANGES FOR ARFOVER=YES
PROBLEM DESCRIPTION:
Some changes to module SASSUSD4 caused the back
level of the module for the ARFOVER=YES code. This
fix will restore these changes to the SASSUSD4
module.
SYMPTOMS:
The ARFOVER change may not work.
IMPACT:
Service Desk interface can be affected.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2904
Copyright (C) 2013 CA. All rights reserved. R00626-AL2113-SP1
DESC(SASSUSD4 - RE-FIT CHANGES FOR ARFOVER=YES) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO48632 )
SUP ( AR58135 RO58135 TR58135 TR58253 )
CA Workload Automation CA 7 Edtion 11.3 37
CA RS 1306 - PTF RO58316 DetailsCA Workload Automation CA 7 Edtion 11.3 37
CA RS 1306 - PTF RO58316 Details
Release Service Details11.3 RO58316 RO58316 M.C.S. ENTRIES = ++PTF (RO58316)
L2JFMIGR - UTILITY TO EXTRACT CA 7 JOB LAST RUN DATE/TIME
PROBLEM DESCRIPTION:
There is a new CA 7 utility, Last Run Date Extract utility, which can be
used to read a CA 7 database and extract the last run date and time for jobs
meeting selection criteria. Output from the utility is a CA 7 batch command
file with a NXTCYC,SET=RUN command for each selected job. Those commands
can be run against a different copy of CA 7 with a parallel database to
update the last run information for one or more application groups.
The selection criteria for the utility is a benchmark date and time, and
jobname, CA 7 system name and CA 7 network name masks. The only required
parameter is a benchmark date. All jobs with a last run date and time equal
to or greater than the benchmark date time that match any other selection
criteria will have a command generated in the format:
NXTCYC,SET=RUN,JOB=jobname,LRDATE=yyddd,LRTIME=hhmmssth
Sample JCL to execute the utility is supplied in CAL2JCL(AL2LRUN).
SYMPTOMS: None
IMPACT: None
CIRCUMVENTION: None
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2889
Copyright (C) 2013 CA. All rights reserved. R00628-AL2113-SP1
DESC(L2JFMIGR - UTILITY TO EXTRACT CA 7 JOB LAST RUN DATE/TIME) .
++VER (Z038)
FMID (CAL2B31)
SUP ( TR58316 )
++HOLD (RO58316) SYSTEM FMID(CAL2B31)
REASON (ENH ) DATE (13128)
COMMENT (
Product: CA Workload Automation SE JFM Release: 11.3
Sequence: N/A
Purpose:
There is a new CA 7 utility, Last Run Date Extract utility, which can be
used to read a CA 7 database and extract the last run date and time for
jobs meeting selection criteria. Output from the utility is a CA 7
batch command file with a NXTCYC,SET=RUN command for each selected job.
Those commands can be run against a different copy of CA 7 with a
parallel database to update the last run information for one or more
application groups.
The selection criteria for the utility is a benchmark date and time,
and jobname, CA 7 system name and CA 7 network name masks. The only
required parameter is a benchmark date. All jobs with a last run date
and time equal to or greater than the benchmark date time that match
any other selection criteria will have a command generated in the
format:
NXTCYC,SET=RUN,JOB=jobname,LRDATE=yyddd,LRTIME=hhmmssth
Sample JCL to execute the utility is supplied in CAL2JCL(AL2LRUN).
Relevance: N/A
Knowledge required: N/A
Access required: N/A
Steps to Perform: N/A
).
CA Workload Automation CA 7 Edtion 11.3 38
CA RS 1306 - PTF RO59371 DetailsCA Workload Automation CA 7 Edtion 11.3 38
CA RS 1306 - PTF RO59371 Details
Release Service Details11.3 RO59371 RO59371 M.C.S. ENTRIES = ++PTF (RO59371)
FIX RO58316 DOES NOT HAVE A PRE FOR RO51292
PROBLEM DESCRIPTION:
Fix RO58316 can get IEW2456E for a couple of SYMBOLS
that are UNRESOLVED - trim and CreateEscapeSequences .
The RO58316 fix does not have a PRE for RO51292.
SYMPTOMS:
SMP APPLY fails.
IMPACT:
Unable to install the RO58316 fix.
CIRCUMVENTION:
none.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 2909
Copyright (C) 2013 CA. All rights reserved. R00632-AL2113-SP1
DESC(FIX RO58316 DOES NOT HAVE A PRE FOR RO51292) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO55213 RO58316 )
SUP ( AR58316 TR59371 )