Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Report No: 124488R-ITAUP09V02
Page: 1 of 48
C-Tick
Test Report
Product Name : Motherboard
Model No. : M5A99FX PRO R2.0
Applicant : ASUSTeK COMPUTER INC.
Address : No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C.
Date of Receipt : 2012/04/24
Issued Date : 2012/05/11
Report No. : 124488R-ITAUP09V02
Report Version : V1.0
The test results relate only to the samples tested.
The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein.
This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government.
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.
Report No: 124488R-ITAUP09V02
Page: 2 of 48
Test Report Cert i f icat ion Issued Date : 2012/05/11
Report No. : 124488R-ITAUP09V02
Product Name : Motherboard
Applicant : ASUSTeK COMPUTER INC.
Address : No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C.
Manufacturer : 1. INFO-TEK ELECTRONICS ( SUZHOU ) CO.,LTD.
2. Cal-Comp Electronics and Communications (suzhou)
Co., Ltd
3. Danriver Technology (Guangzhou) Inc.
4. BOATEK ELECTRONIC CO.,LTD.
5. Global Brands Manufacture (Dongguan) Ltd
Model No. : M5A99FX PRO R2.0
EUT Rated Voltage : Power by PC
EUT Test Voltage : AC 240 V / 50 Hz
Trade Name : ASUS
Applicable Standard : AS/NZS CISPR 22: 2009 Class B
Test Result : Complied
Performed Location : Quietek Corporation (Linkou Laboratory)
No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451,
Taiwan, R.O.C.
TEL:+866-2-8601-3788 / FAX:+886-2-8601-3789
Documented By :
( Senior Adm. Specialist / Genie Chang )
Reviewed By :
( Senior Engineer / Kevin Ker )
Approved By :
( Manager / Vincent Lin )
Report No: 124488R-ITAUP09V02
Page: 3 of 48
Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scopes:
The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory :
No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected]
LinKou Testing Laboratory :
No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected]
Suzhou (China) Testing Laboratory :
No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China.TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected]
Taiwan R.O.C. : BSMI, NCC, TAF
Norway : Nemko, DNV
USA : FCC, NVLAP
Japan : VCCI
Report No: 124488R-ITAUP09V02
Page: 4 of 48
TABLE OF CONTENTS Description Page 1. General Information .................................................................................................... 4 1.1. EUT Description................................................................................................... 5 1.2. Mode of Operation............................................................................................... 6 1.3. Tested System Details ......................................................................................... 7 1.4. Configuration of Tested System........................................................................... 8 1.5. EUT Exercise Software........................................................................................ 9 2. Technical Test ........................................................................................................... 10 2.1. Summary of Test Result..................................................................................... 10 2.2. List of Test Equipment ....................................................................................... 11 2.3. Measurement Uncertainty.................................................................................. 12 2.4. Test Environment ............................................................................................... 13 3. Conducted Emission................................................................................................. 14 3.1. Test Specification............................................................................................... 14 3.2. Test Setup.......................................................................................................... 14 3.3. Limit ................................................................................................................... 14 3.4. Test Procedure .................................................................................................. 15 3.5. Deviation from Test Standard............................................................................. 15 3.6. Test Result ......................................................................................................... 16 3.7. Test Photograph ................................................................................................ 22 4. Conducted Emissions (Telecommunication Ports).................................................... 23 4.1. Test Specification............................................................................................... 23 4.2. Test Setup.......................................................................................................... 23 4.3. Limit ................................................................................................................... 23 4.4. Test Procedure .................................................................................................. 24 4.5. Deviation from Test Standard............................................................................. 24 4.6. Test Result ......................................................................................................... 25 4.7. Test Photograph ................................................................................................ 34 5. Radiated Emission.................................................................................................... 35 5.1. Test Specification............................................................................................... 35 5.2. Test Setup.......................................................................................................... 35 5.3. Limit ................................................................................................................... 36 5.4. Test Procedure .................................................................................................. 37 5.5. Deviation from Test Standard............................................................................. 37 5.6. Test Result ......................................................................................................... 38 5.7. Test Photograph ................................................................................................ 44 6. Attachment................................................................................................................ 46 EUT Photograph ................................................................................................ 46
Report No: 124488R-ITAUP09V02
Page: 5 of 48
1. General Information 1.1. EUT Description
Product Name Motherboard
Trade Name ASUS
Model No. M5A99FX PRO R2.0
Component
CPU AMD, FC-8120 Eight Speed: 3.1GHz
Mother Board ASUS, M5A99FX PRO R2.0
HDD (160G) WD, WD1600AAJS
VGA Card ASUS, DAH4350
LAN Card On Board
Sound Card On Board
Power Supply DELTA, CAA-500AT A
DDR-RAM
(DDR3 2G*4)
ELIXIX, PC3-12800U-9-10-B0-1600
Report No: 124488R-ITAUP09V02
Page: 6 of 48
1.2. Mode of Operation QuieTek has verified the construction and function in typical operation. All the test modes were
carried out with the EUT in normal operation, which was shown in this test report and defined as:
Pre-Test Mode
Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Final Test Mode
Emission Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Report No: 124488R-ITAUP09V02
Page: 7 of 48
1.3. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including
inserted cards) are:
Product Manufacturer Model No. Serial No. Power Cord 1 Notebook PC DELL D630 00144-023-351-283 Non-Shielded, 1.8m 2 Monitor DELL U2410 CN-0J257M-728-01I-0
4NL Non-Shielded, 1.8m
3 Printer EPSON StyLus C63 FAPY012396 Non-Shielded, 1.8m 4 IPod nano Apple A1236 7K823DY0Y0P N/A 5 Microphone &
Earphone Ergotech ET-E201 N/A Non-Shielded, 1.8m
6 Microphone & Earphone
Ergotech ET-E201 N/A N/A
7 USB 3.0 WD WDBACY5000ABK-PESN
WX81A2184178 Non-Shielded, 1.8m
8 USB 3.0 WD WDBACY5000ABK-PESN
WX91C8001642T Non-Shielded, 1.8m
9 Speaker PHILIPS SBP1100 HS1A0825057523 Shielded, 1.5m 10 Speaker PHILIPS SBP1100 HS1A0825057524 N/A 11 Speaker PHILIPS SBP1100 HS1A0825057521 N/A 12 Cambridge
SoundWorks Creative S80130 AM01302400003563 Non-Shielded, 1.8m
13 SATA HDD Onnto ST-M10 A01926-F03-0011 Non-Shielded, 1.8m 14 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071734 Shielded, 1.5m 15 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071909 N/A 16 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071917 N/A 17 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071927 N/A 18 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071812 N/A 19 Keyboard Logitech Y-SM46 867404-0121 N/A 20 Mouse HP M-S69 N/A N/A 21 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071926 N/A 22 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071922 N/A 23 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071929 N/A 24 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071830 N/A 25 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071925 N/A 26 HDD(1T) ADATA ASH02-1TU-CBK 1B3320071990 N/A
Report No: 124488R-ITAUP09V02
Page: 8 of 48
1.4. Configuration of Tested System
Connection Diagram
Signal Cable Type Signal cable Description
A LAN Cable Non-Shielded, 3.0m
B D-SUB Cable Shielded, 1.8m, with two ferrite cores bonded.
C Fiber Cable Non-Shielded, 1.5m
D USB Cable Shielded, 1.5m
E Audio Cable Non-Shielded, 1.6m
F Microphone & Earphone Cable Non-Shielded, 1.6m, two PCS.
G USB 3.0 Cable Shielded, 1.0m, two PCS.
H Speaker Cable Non-Shielded, 1.2m, three PCS
I e-SATA Cable Shielded, 1.0m
J Keyboard Cable Shielded, 1.8m
K Mouse Cable Shielded, 1.8m
L USB Cable Shielded, 1.8m, eleven PCS.
Report No: 124488R-ITAUP09V02
Page: 9 of 48
1.5. EUT Exercise Software
1 Setup the EUT and simulators as shown on 1.4.
2 Turn on the power of all equipment.
3 Personal Computer reads data from disk.
4 Personal Computer sends “H” pattern to printer, the printer will print “H” pattern on paper.
5 Personal Computer reads and writes data into and from modem.
6 Repeat the above procedure (4) to (6).
Report No: 124488R-ITAUP09V02
Page: 10 of 48
2. Technical Test
2.1. Summary of Test Result
No deviations from the test standards
Deviations from the test standards as below description:
Emission
Performed Item Normative References Test
Performed Deviation
Conducted Emission AS/NZS CISPR 22: 2009 Class B Yes No
Impedance Stabilization Network AS/NZS CISPR 22: 2009 Class B Yes No
Radiated Emission AS/NZS CISPR 22: 2009 Class B Yes No
Report No: 124488R-ITAUP09V02
Page: 11 of 48
2.2. List of Test Equipment Conducted Emission / SR8 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver R&S ESCS 30 838251/001 2011/06/02 LISN R&S ESH3-Z5 836679/020 2012/04/23 LISN R&S ENV216 100097 2012/04/23 Pulse Limiter R&S ESH3-Z2 357.8810.52 2011/09/23 Impedance Stabilization Network / SR8 Instrument Manufacturer Type No. Serial No Cal. Date Capacitive Voltage Probe Schaffner CVP2200A 18331 2011/11/23 EMI Test Receiver R&S ESCS 30 838251/001 2011/06/02 LISN R&S ESH3-Z5 836679/020 2012/04/23 LISN R&S ENV216 100097 2012/04/23 Pulse Limiter R&S ESH3-Z2 357.8810.52 2011/09/23 RF Current Probe FCC F-65 10KHz~1GHz 198 2011/10/25 Impedance Stabilization Network
Teseq ISN T800 29414 2011/08/10
Radiated Emission / Site1 Instrument Manufacturer Type No. Serial No Cal. Date Bilog Antenna Schaffner Chase CBL6112B 2918 2011/07/22 EMI Test Receiver R&S ESCS 30 100121 2012/03/07 Pre-Amplifier QTK N/A N/A 2011/07/06 CXA Signal Analyzer Agilent N9000A MY50510072 2012/02/24 Site1 NSA QTK N/A N/A 2011/07/06
Radiated Emission / CB7 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver Agilent E4440A MY46185846 2011/12/12 Horn Antenna ETS-Lindgren 3117 00135205 2012/03/30 Horn Antenna SCHWARZBECK 9120D 576 2011/11/14 Pre-Amplifier QuieTek AP-180C CHM/071920 2011/07/12 CB7 VSWR QTK N/A N/A 2011/08/25
Report No: 124488R-ITAUP09V02
Page: 12 of 48
2.3. Measurement Uncertainty
Conducted Emission
The measurement uncertainty is evaluated as ± 2.26 dB.
Impedance Stabilization Network
The measurement uncertainty is evaluated as ± 2.26 dB.
Radiated Emission
The measurement uncertainty is evaluated as ± 3.19 dB.
Report No: 124488R-ITAUP09V02
Page: 13 of 48
2.4. Test Environment
Performed Item Items Required Actual
Temperature (C) 15-35 25
Conducted Emission Humidity (%RH) 25-75 52
Barometric pressure (mbar) 860-1060 950-1000
Temperature (C) 15-35 25
Impedance Stabilization Network Humidity (%RH) 25-75 52
Barometric pressure (mbar) 860-1060 950-1000
Temperature (C) 15-35 23.9
Radiated Emission Humidity (%RH) 25-75 58
Barometric pressure (mbar) 860-1060 950-1000
Report No: 124488R-ITAUP09V02
Page: 14 of 48
3. Conducted Emission
3.1. Test Specification
According to EMC Standard : AS/NZS CISPR 22
3.2. Test Setup
3.3. Limit
Limits
Frequency (MHz)
QP (dBuV)
AV (dBuV)
0.15 - 0.50 66 - 56 56 – 46
0.50-5.0 56 46
5.0 - 30 60 50
Remarks: In the above table, the tighter limit applies at the band edges.
Report No: 124488R-ITAUP09V02
Page: 15 of 48
3.4. Test Procedure
The EUT and simulators are connected to the main power through a line impedance
stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the
measuring equipment. The peripheral devices are also connected to the main power through
a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination.
(Please refers to the block diagram of the test setup and photographs.)
Both sides of A.C. line are checked for maximum conducted interference. In order to find the
maximum emission, the relative positions of equipment and all of the interface cables must
be changed on conducted measurement.
Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using
a receiver bandwidth of 9kHz.
3.5. Deviation from Test Standard
No deviation.
Report No: 124488R-ITAUP09V02
Page: 16 of 48
3.6. Test Result Site : SR8 Time : 2012/04/27 - 17:53
Limit : CISPR_B_00M_QP Margin : 10
EUT : Motherboard Probe : ENV216_L1 - Line1
Power : AC 240V/50Hz Note : Mode 1
Report No: 124488R-ITAUP09V02
Page: 17 of 48
Site : SR8 Time : 2012/04/27 - 17:54
Limit : CISPR_B_00M_QP Margin : 0
EUT : Motherboard Probe : ENV216_L1 - Line1
Power : AC 240V/50Hz Note : Mode 1
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 * 0.150 9.697 40.310 50.007 -15.993 66.000 QUASIPEAK
2 0.193 9.804 37.120 46.924 -17.847 64.771 QUASIPEAK
3 4.115 9.860 29.500 39.360 -16.640 56.000 QUASIPEAK
4 8.701 9.974 28.520 38.494 -21.506 60.000 QUASIPEAK
5 15.443 10.138 30.700 40.838 -19.162 60.000 QUASIPEAK
6 26.314 10.180 26.560 36.740 -23.260 60.000 QUASIPEAK
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 18 of 48
Site : SR8 Time : 2012/04/27 - 17:54
Limit : CISPR_B_00M_AV Margin : 0
EUT : Motherboard Probe : ENV216_L1 - Line1
Power : AC 240V/50Hz Note : Mode 1
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 * 0.150 9.697 35.100 44.797 -11.203 56.000 AVERAGE
2 0.193 9.804 32.000 41.804 -12.967 54.771 AVERAGE
3 4.115 9.860 16.710 26.570 -19.430 46.000 AVERAGE
4 8.701 9.974 22.650 32.624 -17.376 50.000 AVERAGE
5 15.443 10.138 24.460 34.598 -15.402 50.000 AVERAGE
6 26.314 10.180 20.880 31.060 -18.940 50.000 AVERAGE
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 19 of 48
Site : SR8 Time : 2012/04/27 - 17:54
Limit : CISPR_B_00M_QP Margin : 10
EUT : Motherboard Probe : ENV216_N - Line2
Power : AC 240V/50Hz Note : Mode 1
Report No: 124488R-ITAUP09V02
Page: 20 of 48
Site : SR8 Time : 2012/04/27 - 17:55
Limit : CISPR_B_00M_QP Margin : 0
EUT : Motherboard Probe : ENV216_N - Line2
Power : AC 240V/50Hz Note : Mode 1
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 * 0.150 9.800 40.150 49.950 -16.050 66.000 QUASIPEAK
2 0.189 9.771 38.570 48.341 -16.545 64.886 QUASIPEAK
3 4.963 9.876 29.720 39.596 -16.404 56.000 QUASIPEAK
4 8.861 9.998 28.360 38.358 -21.642 60.000 QUASIPEAK
5 15.314 10.176 29.970 40.146 -19.854 60.000 QUASIPEAK
6 28.310 10.380 29.630 40.010 -19.990 60.000 QUASIPEAK
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 21 of 48
Site : SR8 Time : 2012/04/27 - 17:55
Limit : CISPR_B_00M_AV Margin : 0
EUT : Motherboard Probe : ENV216_N - Line2
Power : AC 240V/50Hz Note : Mode 1
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 0.150 9.800 34.950 44.750 -11.250 56.000 AVERAGE
2 0.189 9.771 33.130 42.901 -11.985 54.886 AVERAGE
3 * 4.963 9.876 27.540 37.416 -8.584 46.000 AVERAGE
4 8.861 9.998 22.630 32.628 -17.372 50.000 AVERAGE
5 15.314 10.176 23.850 34.026 -15.974 50.000 AVERAGE
6 28.310 10.380 25.020 35.400 -14.600 50.000 AVERAGE
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 22 of 48
3.7. Test Photograph Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Front View of Conducted Test
Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Back View of Conducted Test
Report No: 124488R-ITAUP09V02
Page: 23 of 48
4. Conducted Emissions (Telecommunication Ports)
4.1. Test Specification
According to EMC Standard : AS/NZS CISPR 22
4.2. Test Setup
4.3. Limit
Limits
Frequency (MHz)
QP (dBuV)
AV (dBuV)
0.15 - 0.50 84 – 74 74 – 64
0.50 - 30 74 64
Remarks:
The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz~0.50
MHz.
Report No: 124488R-ITAUP09V02
Page: 24 of 48
4.4. Test Procedure
Telecommunication Port:
The mains voltage shall be supplied to the EUT via the LISN when the measurement of
telecommunication port is performed. The common mode disturbances at the
telecommunication port shall be connected to the ISN, which is 150 ohm impedance.
Both alternative cables are tested related to the LCL requested. The measurement range is
from 150kHz to 30MHz. The bandwidth of measurement is set to 9kHz.
The 75dB LCL ISN is used for cat. 6 cable, the 65dB LCL ISN is used for cat. 5 cable, 55dB
LCL ISN is used for cat. 3. 4.5. Deviation from Test Standard
No deviation.
Report No: 124488R-ITAUP09V02
Page: 25 of 48
4.6. Test Result Site : SR8 Time : 2012/04/27 - 17:57
Limit : ISN_Voltage_B_00M_QP Margin : 10
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 10M
Report No: 124488R-ITAUP09V02
Page: 26 of 48
Site : SR8 Time : 2012/04/27 - 17:58
Limit : ISN_Voltage_B_00M_QP Margin : 0
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 10M
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 1.189 10.200 49.000 59.200 -14.800 74.000 QUASIPEAK
2 * 2.382 10.200 50.280 60.480 -13.520 74.000 QUASIPEAK
3 2.580 10.200 50.030 60.230 -13.770 74.000 QUASIPEAK
4 4.963 10.206 48.280 58.486 -15.514 74.000 QUASIPEAK
5 7.502 10.247 49.220 59.467 -14.533 74.000 QUASIPEAK
6 12.502 10.345 47.690 58.035 -15.965 74.000 QUASIPEAK
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 27 of 48
Site : SR8 Time : 2012/04/27 - 17:58
Limit : ISN_Voltage_B_00M_AV Margin : 0
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 10M
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 1.189 10.200 47.710 57.910 -6.090 64.000 AVERAGE
2 * 2.382 10.200 49.670 59.870 -4.130 64.000 AVERAGE
3 2.580 10.200 49.510 59.710 -4.290 64.000 AVERAGE
4 4.963 10.206 46.880 57.086 -6.914 64.000 AVERAGE
5 7.502 10.247 37.460 47.707 -16.293 64.000 AVERAGE
6 12.502 10.345 35.120 45.465 -18.535 64.000 AVERAGE
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 28 of 48
Site : SR8 Time : 2012/04/27 - 18:00
Limit : ISN_Voltage_B_00M_QP Margin : 10
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 100M
Report No: 124488R-ITAUP09V02
Page: 29 of 48
Site : SR8 Time : 2012/04/27 - 18:01
Limit : ISN_Voltage_B_00M_QP Margin : 0
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 100M
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 1.193 10.200 49.500 59.700 -14.300 74.000 QUASIPEAK
2 2.380 10.200 50.380 60.580 -13.420 74.000 QUASIPEAK
3 2.580 10.200 50.070 60.270 -13.730 74.000 QUASIPEAK
4 4.963 10.206 48.350 58.556 -15.444 74.000 QUASIPEAK
5 * 23.130 10.400 50.320 60.720 -13.280 74.000 QUASIPEAK
6 26.486 10.400 48.870 59.270 -14.730 74.000 QUASIPEAK
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 30 of 48
Site : SR8 Time : 2012/04/27 - 18:01
Limit : ISN_Voltage_B_00M_AV Margin : 0
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 100M
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 1.193 10.200 47.890 58.090 -5.910 64.000 AVERAGE
2 * 2.380 10.200 49.680 59.880 -4.120 64.000 AVERAGE
3 2.580 10.200 49.610 59.810 -4.190 64.000 AVERAGE
4 4.963 10.206 46.830 57.036 -6.964 64.000 AVERAGE
5 23.130 10.400 47.200 57.600 -6.400 64.000 AVERAGE
6 26.486 10.400 45.420 55.820 -8.180 64.000 AVERAGE
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 31 of 48
Site : SR8 Time : 2012/04/27 - 18:26
Limit : ISN_Voltage_B_00M_QP Margin : 10
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 1G
Report No: 124488R-ITAUP09V02
Page: 32 of 48
Site : SR8 Time : 2012/04/27 - 18:27
Limit : ISN_Voltage_B_00M_QP Margin : 0
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 1G
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 1.193 10.200 50.170 60.370 -13.630 74.000 QUASIPEAK
2 1.388 10.200 47.500 57.700 -16.300 74.000 QUASIPEAK
3 * 2.380 10.200 51.250 61.450 -12.550 74.000 QUASIPEAK
4 2.580 10.200 50.750 60.950 -13.050 74.000 QUASIPEAK
5 4.564 10.200 46.890 57.090 -16.910 74.000 QUASIPEAK
6 4.963 10.206 48.630 58.836 -15.164 74.000 QUASIPEAK
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 33 of 48
Site : SR8 Time : 2012/04/27 - 18:27
Limit : ISN_Voltage_B_00M_AV Margin : 0
EUT : Motherboard Probe : TESEQ_T8 - Line1
Power : AC 240V/50Hz Note : Mode 1, 1G
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV)
Margin
(dB)
Limit
(dBuV)
Detector Type
1 1.193 10.200 48.570 58.770 -5.230 64.000 AVERAGE
2 1.388 10.200 47.490 57.690 -6.310 64.000 AVERAGE
3 * 2.380 10.200 49.630 59.830 -4.170 64.000 AVERAGE
4 2.580 10.200 49.520 59.720 -4.280 64.000 AVERAGE
5 4.564 10.200 46.880 57.080 -6.920 64.000 AVERAGE
6 4.963 10.206 47.310 57.516 -6.484 64.000 AVERAGE
Note:
1. All Reading Levels are Quasi-Peak and average value.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 34 of 48
4.7. Test Photograph
Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Front View of ISN Test
Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Back View of ISN Test
Report No: 124488R-ITAUP09V02
Page: 35 of 48
5. Radiated Emission
5.1. Test Specification
According to EMC Standard : AS/NZS CISPR 22
5.2. Test Setup
Under 1GHz Test Setup:
Above 1GHz Test Setup:
Report No: 124488R-ITAUP09V02
Page: 36 of 48
5.3. Limit
Limits
Frequency
(MHz) Distance (m) dBuV/m
30 – 230 10 30
230 – 1000 10 37
Limits
Frequency
(GHz)
Distance
(m)
Peak
(dBuV/m)
Average
(dBuV/m)
1 – 3 3 70 50
3 – 6 3 74 54
Remark:
1. The tighter limit shall apply at the edge between two frequency bands.
2. Distance refers to the distance in meters between the measuring instrument antenna
and the closed point of any part of the device or system.
Highest frequency generated or used
in the device or on which the device
operates or tunes (MHz)
Upper frequency of measurement
range (MHz)
Below 108 1000
108 – 500 2000
500 – 1000 5000
Above 1000 5th harmonic of the highest frequency
or 6 GHz, whichever is lower
Report No: 124488R-ITAUP09V02
Page: 37 of 48
5.4. Test Procedure
The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The
turn table can rotate 360 degrees to determine the position of the maximum emission level.
The EUT was positioned such that the distance from antenna to the EUT was 3/10 meters.
The antenna can move up and down between 1 meter and 4 meters to find out the maximum
emission level.
Both horizontal and vertical polarization of the antenna are set on measurement. In order to
find the maximum emission, all of the interface cables must be manipulated on radiated
measurement.
Radiated emissions were invested over the frequency range from 30MHz to1GHz using a
receiver bandwidth of 120kHz and above 1GHz using a receiver bandwidth of 1MHz.
30MHz to1GHz Radiated was performed at an antenna to EUT distance of 10 meters.
Above1GHz Radiated was performed at an antenna to EUT distance of 3 meters.
5.5. Deviation from Test Standard
No deviation.
Report No: 124488R-ITAUP09V02
Page: 38 of 48
5.6. Test Result Site : Site1 Time : 2012/05/01 - 02:09
Limit : CISPR_B_10M_QP Margin : 6
EUT : Motherboard Probe : Site1_CBL6112_10M_0726 - HORIZONTAL
Power : AC 240V/50Hz Note : Mode 1
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV/m)
Margin
(dB)
Limit
(dBuV/m)
Detector Type
1 * 125.000 14.019 11.700 25.719 -4.281 30.000 QUASIPEAK
2 146.800 12.918 10.900 23.818 -6.182 30.000 QUASIPEAK
3 266.675 16.033 14.200 30.233 -6.767 37.000 QUASIPEAK
4 333.343 18.136 12.900 31.037 -5.963 37.000 QUASIPEAK
5 466.695 21.864 10.600 32.464 -4.536 37.000 QUASIPEAK
6 500.000 22.512 9.800 32.312 -4.688 37.000 QUASIPEAK
7 566.698 24.166 7.100 31.266 -5.734 37.000 QUASIPEAK
8 720.000 26.020 5.500 31.520 -5.480 37.000 QUASIPEAK
9 801.650 27.017 5.400 32.417 -4.583 37.000 QUASIPEAK
10 999.000 29.000 2.200 31.200 -5.800 37.000 QUASIPEAK
Note:
1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or
average measurements as necessary.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 39 of 48
Site : Site1 Time : 2012/05/01 - 02:26
Limit : CISPR_B_10M_QP Margin : 6
EUT : Motherboard Probe : Site1_CBL6112_10M_0726 - VERTICAL
Power : AC 240V/50Hz Note : Mode 1
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV/m)
Margin
(dB)
Limit
(dBuV/m)
Detector Type
1 125.000 14.019 10.900 24.919 -5.081 30.000 QUASIPEAK
2 166.675 12.031 11.400 23.431 -6.569 30.000 QUASIPEAK
3 266.677 16.033 15.100 31.133 -5.867 37.000 QUASIPEAK
4 300.006 16.904 15.600 32.504 -4.496 37.000 QUASIPEAK
5 333.500 18.141 13.100 31.241 -5.759 37.000 QUASIPEAK
6 500.000 22.512 8.200 30.712 -6.288 37.000 QUASIPEAK
7 566.715 24.166 8.200 32.366 -4.634 37.000 QUASIPEAK
8 * 799.400 26.987 5.700 32.687 -4.313 37.000 QUASIPEAK
9 999.000 29.000 3.000 32.000 -5.000 37.000 QUASIPEAK
Note:
1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or
average measurements as necessary.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 40 of 48
Site : Site1 Time : 2012/05/01 - 02:46
Limit : CNS13438_B_Open_10M_QP Margin : 6
EUT : Motherboard Probe : Site1_CBL6112_10M_0726 - HORIZONTAL
Power : AC 240V/50Hz Note : Mode 2
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV/m)
Margin
(dB)
Limit
(dBuV/m)
Detector Type
1 63.400 6.571 23.100 29.671 -6.329 36.000 QUASIPEAK
2 125.000 14.019 15.100 29.119 -6.881 36.000 QUASIPEAK
3 * 166.671 12.031 20.700 32.731 -3.269 36.000 QUASIPEAK
4 266.677 16.033 21.300 37.333 -5.667 43.000 QUASIPEAK
5 333.343 18.136 18.900 37.037 -5.963 43.000 QUASIPEAK
6 500.011 22.512 13.700 36.212 -6.788 43.000 QUASIPEAK
7 800.000 26.996 10.900 37.896 -5.104 43.000 QUASIPEAK
8 999.007 29.000 8.600 37.600 -5.400 43.000 QUASIPEAK
Note:
1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or
average measurements as necessary.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 41 of 48
Site : Site1 Time : 2012/05/01 - 02:59
Limit : CNS13438_B_Open_10M_QP Margin : 6
EUT : Motherboard Probe : Site1_CBL6112_10M_0726 - VERTICAL
Power : AC 240V/50Hz Note : Mode 2
Frequency
(MHz)
Correct Factor
(dB)
Reading Level
(dBuV)
Measure Level
(dBuV/m)
Margin
(dB)
Limit
(dBuV/m)
Detector Type
1 57.000 7.222 24.600 31.823 -4.177 36.000 QUASIPEAK
2 125.000 14.019 13.200 27.219 -8.781 36.000 QUASIPEAK
3 166.671 12.031 18.100 30.131 -5.869 36.000 QUASIPEAK
4 266.677 16.033 21.700 37.733 -5.267 43.000 QUASIPEAK
5 333.347 18.136 18.700 36.837 -6.163 43.000 QUASIPEAK
6 533.357 23.535 15.000 38.535 -4.465 43.000 QUASIPEAK
7 666.000 24.930 14.400 39.330 -3.670 43.000 QUASIPEAK
8 * 800.000 26.996 14.000 40.996 -2.004 43.000 QUASIPEAK
9 999.008 29.000 10.700 39.700 -3.300 43.000 QUASIPEAK
Note:
1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or
average measurements as necessary.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Correct Factor
Report No: 124488R-ITAUP09V02
Page: 42 of 48
Site: CB7 Time: 2012/04/28 - 05:10
Limit: CISPR_22_B_(Above_1G) Margin: 0
Probe: CB7_Horn_3117_1204 Polarity: Horizontal
EUT: Motherboard Power: AC 230V/50Hz
Note: Mode 1
No Flag Mark Frequency
(MHz)
Measure Level
(dBuV/m)
Reading Level
(dBuV)
Over Limit
(dB)
Limit
(dBuV/m)
Factor Type
1 * 1200.000 60.829 65.280 -9.171 70.000 -4.451 PK
2 1200.000 32.029 36.480 -17.971 50.000 -4.451 AV
3 1674.500 51.338 53.980 -18.662 70.000 -2.641 PK
4 1674.500 31.128 33.770 -18.872 50.000 -2.641 AV
Note:
1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or
average measurements as necessary.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp).
Report No: 124488R-ITAUP09V02
Page: 43 of 48
Site: CB7 Time: 2012/04/28 - 05:12
Limit: CISPR_22_B_(Above_1G) Margin: 0
Probe: CB7_Horn_3117_1204 Polarity: Vertical
EUT: Motherboard Power: AC 230V/50Hz
Note: Mode 1
No Flag Mark Frequency
(MHz)
Measure Level
(dBuV/m)
Reading Level
(dBuV)
Over Limit
(dB)
Limit
(dBuV/m)
Factor Type
1 1200.000 52.779 57.230 -17.221 70.000 -4.451 PK
2 1200.000 31.379 35.830 -18.621 50.000 -4.451 AV
3 2387.500 53.330 52.900 -16.670 70.000 0.431 PK
4 * 2387.500 35.890 35.460 -14.110 50.000 0.431 AV
Note:
1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or
average measurements as necessary.
2. " * ", means this data is the worst emission level.
3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp).
Report No: 124488R-ITAUP09V02
Page: 44 of 48
5.7. Test Photograph Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Front View of Radiated Test
Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Back View of Radiated Test
Report No: 124488R-ITAUP09V02
Page: 45 of 48
Test Mode : Mode 1: AMD FC-8120 Eight - Core Processor 3.1GHz, D-sub 1920*1200/60Hz
Description : Front View of High Frequency Radiated Test
Report No: 124488R-ITAUP09V02
Page: 46 of 48
6. Attachment EUT Photograph
(1) EUT Photo
(2) EUT Photo
Report No: 124488R-ITAUP09V02
Page: 47 of 48
(3) EUT Photo
(4) EUT Photo
Report No: 124488R-ITAUP09V02
Page: 48 of 48
(5) EUT Photo