C SYSTEM · 2018-01-08 · Itegrat I Syst I. 35 aa Lae Ra i T 076 A tel +0.567.070 aleiystecom Poduc ifai i be ae i ie. All ba ae a oduc ae ae aea iyste 0 iyste All Ri Reeve rev A

www.i2systems.comIntegrated Illumination Systems, Inc.355 Bantam Lake RoadMorris, CT 06763 USA

tel [email protected]

Product information is subject to change without notice.All brand names and product names are trademarks of i2Systems.© 2017 i2Systems. All Rights Reserved.

rev APage 1 of 7

High-Efficiency Linear Asymmetrical LED Fixture for Indirect Illumination.

Compose SYSTEM

SPECIFICATION CODE BUILDER

PERFORMANCE Lumens

Candela

0.5%0.00 0.0% 62.05115-120

0

30-3535-4040-4545-5050-5555-60

90-9595-100100-105105-110110-115

40.72

1.6%2.6%3.5%4.4%5.2%

9.1%9.3%8.5%

155-160150-155

175-180

6.8%3.6%0.8% 35.77

30.1824.0117.4710.623.56

170-175165-170160-165

0.170.09

125-1300.0%65-70 0.04

6.0%6.6%

145-1500.0%0.0%0.0%0.0%0.0%

70-7575-8080-85

8.0%7.6%

0.41

7.2%

400#N/A

Total Lumen Output:Spacing Criteria

0-5 0.01 0.0% 8.4%ZoneZone % of Luminaire

57.59120-12560-650

#N/A

Distribution Test ConditionsTemperature Voltage Current Power Power Factor

7.172 W

Distribution - Goniophotometer

Frequency Current THD0.06133 A 0.97424.5 °C 120.0 VAC 60 Hz 20.0 %

682.7Summary of Results

0-180:90-270: Maximum Candela:

lm/w95.2

135-14015-2010-15

Test Number 1170145 - Page 5 of 7

Luminaire Efficacy:

0.1%85-90000000

24.8146.1658.3763.81

25-30

0.0%0.0% 5.68

0.0%0.0%

0.0%

130-135

0.0%0.27

Zone Lumens % of Luminaire Lumens % of LuminaireLumens

00 0.0%

0.0%52.0848.83

54.9005-10

45.07

0.0%

0-600-90

00

0.0%0.0%

0-40

90-1801

6820.1%99.9%

Zone Lumens % of Luminaire

20-25 140-145

POLAR PLOT 98.7 lm/W 83 CRI (90+ Available)

Output Factors

CCT Multiplier

2700K 0.96

3000K 1

3500K 1.03

4000K 1.05

4500K 1.05

5000K 1.05

6500K 1.05

3000K LUMEN DATA LUMEN FACTOR MAX RUN/FEEDWatts Max. Run Length

POWER 120VAC 277VAC

2 240Ft 270Ft

3 150Ft 270Ft

4 100Ft 270Ft

5 90Ft 220Ft

6 75Ft 180Ft

7 65Ft 160Ft

8 60Ft 120Ft

9 50Ft 120Ft

10 45Ft 100Ft

11 45Ft 95Ft

12 40Ft 90Ft

Series Power Color CRI Mounting Cable Geometry Orientation

CPCompose

02W* 27K - 2700K S - Standard+82 SF - Surface Fixed Mount SC - Straight S-_____Ft. IC - Inside Corner

03W* 30K - 3000K H - High92+ SA - Surface Adj. Mount RT - Right Angle L-_____x_____Ft. OC - Outside Corner

04W* 35K - 3500K WF - Wall Mount Flat Front++ U-_____x_____x_____Ft.

05W 40K - 4000K GF - Gypsum Flat Front R-_____x_____Ft.

06W 45K - 4500K K1 - Gypsum Knife Edge 300 C- Custom+

07W 50K - 5000K K2- Gypsum Knife Edge 400 Geometry Direction

08W 65K - 6500K AC - ACT S-Straight

09W WW - Wall Wash L-L-Shape

10W SF and SA are Shipped with QickTrack Mounting Rail U-U-Shape

11W R-Rectangle/Square

12W * Non-dimming +Contact Factory ++Custom Color Contact Factory

EXAMPLE: CP-03W-35K-S-GF-RT-S-IC

CP

• Extruded Aluminum Housing/ UV Stabilized Polycarbonate Lens.

• IP50 Rating

• Weight: 1Ft: .87lb, 1.5Ft:1.31lb , 4Ft: 3.48lbs. Corner Weight: 1.69lb

FEATURES ELECTRICAL SPECIFICATIONS

PHYSICAL

• Plug-and-play design allows for any combination of 1, 1.5 and 4 foot modules to be installed for up to 100’ from a single power feed.

• Luminaires can be installed in a variety of configurations: linearly, around corners, or in curved installations. Both inside and outside striation free corners are available in ranges of 45-179 degrees for continuous lighting.

• Prefabricated cove mounting channel reduces installation time and cost, while keeping the small form factor.

• Easily connects to the building’s power source (100 - 277 VAC, 50 / 60 Hz) via entry cable provided.

• Strict 2-Step MacAdam Ellipse binning. Each fixture is photometrically tested and serialized for traceability.

Input Voltage 120 - 277 VAC, 50 / 60 Hz

Input Power 2W - 12W Factory Programmable *2W - 4W Non-dimming

Max. Load 60Ft @ 120 VAC. 100Ft @ 277 VAC. Startup/Operating: -20°C to +40°C

Temperature Storage: -30°C to +60°C Relative Humidity: 10 - 90% (non-condensing)

Dimming >5% via 0 - 10 VDC

Life 60,000 hours to L70

System Watts/Ft

Delivered Lumens/Ft

83 CRI 92 CRI

2 197 158

3 296 237

4 395 316

5 494 395

6 592 474

7 691 553

8 790 632

9 888 710

10 987 790

11 1086 869

12 1184 947

For Other Color Temperature Contact Factory.




rev APage 2 of 7


Compose SYSTEM

Cable connect to next fixture in run

1.33” [34mm]

Length “A”

LED MODULE DIMENSIONS

CABLE OPTIONS

WIRING DIAGRAM

120” [3048mm]

120” [3048mm]

Power Input Straight Cable: ___CP-PIC-S-120

Power Input Right Angle Cable: ___CP-PIC-R-120

WIRE COLORSBLACK - LineWHITE - NeutralGREEN - GroundGRAY - Dimming (-)VIOLET - Dimming (+)

"A" Power Color CRI

12'' CP12 XXW XXK X

18'' CP18 XXW XXK X

48'' CP48 XXW XXK X

Available in 3 lengths “A”:

Length A

Extends up to 3.0”

0.7” [20mm]

0.6” [17mm]

1.2” [32mm]

0.4” [12mm]

0.5” [12.8mm]

0.5” [12.8mm]

0.6” [17mm]

0.9” [24mm]

1.1” [30mm]

0.4” [12mm]

Corner Angle (0) Power Color CRI

Inside CPIC XXXD XXW XXK X

Outside CPOC XXXD XXW XXK X

Inside and Outside Pre-made

Corners Available.

Inside Corner Module:___CPICXXXDXXWXXKX

Outside Corner Module:___CPOCXXXDXXWXXKX

CORNER MODULE OPTIONS

SNAP IN MODULE

SURFACE FIXED MOUNT

SURFACE ADJ. MOUNT, O DEGREES

SURFACE ADJ. MOUNT, 25 DEGREES

SURFACE ADJ. MOUNT, -3O DEGREES

KNIFE EDGE 30 DEGREE EXTRUSION


FLAT FRONT EXTRUSION

WALL MOUNT FLAT FRONT

14”[356mm]

SNAP IN MODULE

SURFACE FIXED MOUNT








14”[356mm]

1.33”[34mm]

1.33”[34mm]




rev APage 3 of 7


Compose SYSTEM

SURFACE MOUNTING

QUICKTRACK MOUNTING SYSTEM

SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








Surface Fixed Mount, 00: ___CP-CLP-FX1

Surface Adj. Mount, +250

Surface Adj. Mount, 00:___CP-CLP-AJ1

Surface Adj. Mount, -300

0.3” [8mm]

1.9” [48mm]

2.0” [56mm]

48” [1220mm]

0.5” [13mm]

0.5” [13mm]

16.2” [411mm]

15.6” [396mm]

15.6” [396mm]

4' Max. Length ALUMINUM Field Cutable Hardware Supplied By Others.Quicktrack Mounting System included in shipment and required for all Surface Mounted options.

Surface Mount Track: ___CP-CLP-QT

0.3” [8mm]

1.9” [48mm]

1.9” [48mm]

2.1” [53mm]

2.1” [53mm]

2.0” [51mm]

2.4” [61mm]2.3”

[59mm]

2.1” [53mm]

2.1” [53mm]

2.3” [59mm]

2.3” [59mm]

1.8” [45.5mm]




rev APage 4 of 7


Compose SYSTEM

WALL MOUNT OPTIONS

WALL MOUNT CORNERS

SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








Wall Mount Flat Front___CP-WF-EXT

End Cap:___CP-WF-END-L ___CP-WF-END-R

Inside Corner ___CP-WF-IC-XXXD

1.5” [39mm]

2.9” [72mm]

14” [356mm]

14” [356mm]

14” [356mm]

14” [356mm]

Outside Corner___CP-WF-OC-XXXD

Open to Space Below Open to Space Below

Wall

Wall

Wall

Light Direction

Light Direction




rev APage 5 of 7


Compose SYSTEM

GYPSUM MUD-IN PROFILE OPTIONS

SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








Knife Edge 300 Extrusion ___CP-K1-EXT

End Cap: ___CP-K1-END-L ___CP-K1-END-R

Knife Edge 400 Extrusion ___CP-K2-EXT

End Cap: ___CP-K2-END-L ___CP-K2-END-R

Flat Front 900 Extrusion ___CP-GF-EXT

End Cap: ___CP-GF-END-L ___CP-GF-END-R

SNAP IN MODULE

SURFACE FIXED MOUNT








6.5”[165mm]

4.9”[127mm]

0.3” [8mm]

4.2”[127mm] 2.5”

[64mm]

5.7”[165mm] 4.0”

[102mm]

1.4”[36mm]

1.4”[36mm]

1.9”[48mm]

2.1” [53mm]

1.4”[36mm]

2.1” [53mm]

GYPSUM MUD-IN CORNERSInside Corner: ___CP-K1-IC-XXXD ___CP-K2-IC-XXXD ___CP-GF-IC-XXXD

Outside Corner:___CP-K1-OC-XXXD ___CP-K2-OC-XXXD ___CP-GF-OC-XXXD

14” [356mm]

14” [356mm]

14” [356mm]

14” [356mm]

Open to Space Below

Open to Space Below

Higher CeilingHigher Ceiling

Light Direction




rev APage 6 of 7


Compose SYSTEM

WALL WASH PROFILE OPTIONS

UNDER DEVELOPMENT

Knife Edge Extrusion Using Fixed Mount___CP-WW-EXT

End Cap: ___CP-WW-END-L ___CP-WW-END-R

Knife Edge Extrusion Using Adjustable Mount___CP-WW-EXT

End Cap: ___CP-WW-END-L ___CP-WW-END-R

SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








4.5” [114mm]

4.5” [114mm]

2” [51mm]

2” [51mm]

WALL WASH CORNERSInside Corner: ___CP-WW-IC-XXXD

Outside Corner:___CP-WW-OC-XXXD

14” [356mm]

14” [356mm]

14” [356mm]

14” [356mm]

Open to Space Below

Open to Space Below

Higher CeilingHigher Ceiling

Light Direction




rev APage 7 of 7


Compose SYSTEM

SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








ACT PROFILE OPTIONS

______CP-AC-CLP Armstrong AXIOM-Flat Front Indirect Light Cove Mounting Clip

4.5”[114mm]

2.2”[56mm]

2.2”[56mm]

4.4”[114mm]

4”[102mm]

Varies - 6” Min. Recommended[152mm]

4”[102mm]

Varies - 6” Min. Recommended[152mm]

2.3”[58mm]

2.2”[56mm]

SNAP IN MODULE

SURFACE FIXED MOUNT








SNAP IN MODULE

SURFACE FIXED MOUNT








2”[56mm]

2”[56mm]

ACT PROFILE OPTIONS___CP-AC-CLP Armstrong AXIOM-Knife Edge Indirect Light Cove Mounting Clip

*Specify this Mounting Clip for all Armstrong AXIOM Indirect Light Coves

*Specify this Mounting Clip for all Armstrong AXIOM Indirect Light Coves

Armstrong Part Codes

Armstrong Part Codes

___AXIDLCCKEXXXXXX ___AXIDLCWKEXXXXXX

______AXIDLCCXXXXXX ______AXIDLCWXXXXXX

Extrusion Supplied by Armstrong.

Extrusion Supplied by Armstrong.

AXIOM PROFILE EXTRUSIONS MUST BE SUPPLIED BY ARMSTRONG. i2Systems WILL ONLY SUPPLY MOUNTING CLIP.

Documents

C SYSTEM · 2018-01-08 · Itegrat I Syst I. 35 aa Lae Ra i T 076 A tel +0.567.070 aleiystecom Poduc ifai i be ae i ie. All ba ae a oduc ae ae aea iyste 0 iyste All Ri Reeve rev A