C r e ati ve Fa b r ica...Needle Thread consumption File: 130.pes (Babylock, Bernina, Brother Design name: 130 Stitches: 23742 Size: 5.03 x 5.03 " (127.8 x 127.8 mm) Begin: 2.52, 2.52
INSTRUCTION 1. Download the design from the website to your
computer. 2. Unzip the file. Upload the embroidery file to your
machine. 3. Hoop 2 layers of water-soluble mesh. 4. Start
embroidering. The machine will embroider the lace edging and
stop.
5. Place a piece fabric over the outline. Start the machine. It
will embroider the outline zigzag of the same and stop.
6. A sharp scissors cut away the excess fabric as close to the
outline as possible.
7. Return the hoop to the machine. Finish the embroidery.
8. Rinse the stabilizer in lukewarm water and leave to air dry.
Press with steam.
It is important Always make a test stitch-out of the design and
wash away the stabilizer. This helps you to select the threads,
needles, stabilizers and settings of your machine correctly. To get
2-sided embroidery you should use the same thread for the needle
thread and bobbin thread.
