BYSTRONIC ByVention 3015 - Kistner Werkzeugmaschinen...In order to avoid risk of contamination by the compressor, an oilfree screw compressor with - a downstream compressed air treatment

KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

BYSTRONIC ByVention 3015

CNC laser cutting machine

Make and model BYSTRONIC ByVention 3015 Manufacture year 2007 Control ByVision Touch Machine number 41 Sheet format 3.000 x 1.500 mm Laser power 2.200 W Production time approx. 4.450 h

2 - BYSTRONIC ByVention 3015

TECHNICAL DATA

Performance features

Position deviation Pa ± 0.1 mm

Position variation Ps ± 0.05 mm

Positioning speed X and Y direction 100 m/min

Positioning speed, simultaneous 140 m/min

Max. axis acceleration 8 m/s2

Max. laser power 2.200 W

Max. load capacity loading table 300 kg

Max. load capacity cutting table 80 kg

Machine colours NCS S 0585 - Y80R NCS S 7020 - R60B NCS S 2502 - R NCS S 7502 - R

Dimensions and weight L x W x H, approx. 6.250 x 6.000 x 2.150 mm

Weight machine incl. laser source 13.500 kg

Weight feeding table 150 kg

Weight combined cooling and filter unit 1.380 kg

Permissible sheet formats L x W 3.000 x 1.500 mm

2.500 x 1.250 mm 2.000 x 1.000 mm

Permissible materials and sheet thicknesses Structural steel (hot-dip galvanized and galvanized up to 3 mm) 1.0/1.5/2.0/2.5/3.0/4.0/5.0/6.0/8.0

Stainless steel (laser foil coated up to 3 mm) 1.0/1.5/2.0/2.5/3.0/4.0/5.0/6.0

Aluminium 1.0/1.5/2.0/2.5/3.0/4.0

Work area and part sizes Maximum cutting area X – 1.562 mm / Y – 772 mm / Z – 100 mm

Maximum part size 752 x 1.542 mm (bei empfohlenem Randabstand von 10 mm)

Automatic micro-bridge area 40 - 140 mm Operation and interfaces Operating unit - machine Handheld terminal with touchscreen

Operating unit - Handling Foot pedal for clamping sheet metal

Drives USB 1.1 interface on handheld terminal

Network connection Ethernet RJ 45 10/100 MBit/s Laser source Guaranteed output power 2.200 W

Control range 150 – 2.200W

Pulse frequency 1 – 2.500 Hz

Wave lenght 10.6 µm

Polarization circular

Dimensions (L x W x H) 1.880 x 920 x 1.220 mm

Weight 1.100 kg

Reflection Absorber Standard

Laser control LCS (Laser Control System)

Laser excitation DC semiconductor Permissible connection voltages and powers (Machine incl. laser source)

Net type TN / Voltage 3x400 V / Tolerance +6% -10% / Net frequency 50 Hz

Back-up fuse 80 AT Rated output 21 kW

Connected load 23.5 kVA cos θ 0.89

Permissible connection voltages and powers (Dehumidifier of the laser source)

Net type TN / Voltage 230 V / Tolerance +10% -10% / Net frequency 50 or 60 Hz

Back-up fuse 80 AT Rated output 0.25 kW



Combined cooling and filtering device WKL 300-F

Dimensions (L x W x H) 2.200 x 1.545 x 2.150 mm

Weight 1.380 kg

Cooling Cooling power 35 kW -30.000 kcal/h

Flow rate 1.140 1/min (at 4 bar)

Operating pressure max. 6 bar

Connection of water supply 1/2 Zoll

Deflation (to the top) 11.600 m3/h

Filtering Filter type Surface filter

Extraction capacity 1.200 m3/h

Residual thrust 240 dPa

Number of filter elements 6

Filter surface 28.5 m2 (6 x 4.75 m2)

Dust content of clean air < 1 mg/m3

Permissible connection voltages and powers (combined cooling and filtering device)

Net type TN / Voltage 3x400 V / Tolerance +6% -10% / Net frequency 50 Hz

Back-up fuse 63 AT Rated output 14 kW



Compressed air Compressed air quality Min. compressed air quality ISO 8573-1

Max. particle diameter (class 4 or better) 15 µm

Max. particle density (class 4 or better) 8 mg/m3

Max. residual oil content (class 3 or better) 1 mg/m3

Pressure dew point 5°C • Compressed air from the compressor must be free of solvent vapors and aerosols. • In order to avoid risk of contamination by the compressor, an oil-free screw compressor with a downstream compressed air treatment (air dryer) is required. • The air distribution network must be free from contamination and must not contain any oils. • If the above requirements are not met, a compressed air or nitrogen supply from the bottle or tank must be connected for the exit windows and the ventilation duct, or an autonomous screw compressor with compressed air preparation (air dryer) must be provided. Compressed air supply - machine Minimal dynamic pressure on the supply unit 6 bar

Connection size 1/2 Zoll

Maximum consumption 50 Nm3/h

Max. compressed air temperature when entering the maintenance unit

43°C

Compressed air supply - cooling and filter unit Minimum inlet pressure 6 bar

Connection size 1/2 Zoll

Average consumption 0.6 Nm3/h


Supply of gas Lasergas consumption LASERMIX 312 Inlet pressure 5 bar

Gas consumption Fastmix 100 Nl/h

Gas consumption Normalmix 6 Nl/h

Fastmix time 15 min

Cutting gas supply Cutting gas consumption 02 or N2 each at the machine connection

depending on the material application

N2 primary pressure dynamic at the machine input 25 bar

N2 passage dynamic 1.600 1/min

N2 primary pressure static at the machine input 30 bar

02 primary pressure dynamic at the machine input 10 bar

02 passage dynamic 150 1/min

02 primary pressure static at the machine inlet 20 bar

Machine connection (diameter) 12 mm

Cutting gas quality


Gas type Quality Purity [Vol.%]

Proportion of nitrogen + argon (N2 + Ar) [ppm]

Water content (H2O) [ppm]

Cutting surface

Oxygen O2 3.5 ≥ 99.95 ≤ 500 ≤ 5 Oxibildung

Gasart

Quality

Purity [Vol.%]

Proportion of oxygen (O2) [ppm]

Water content (H2O) [ppm]

Cutting surface

Nitrogen N2 5.0 ≥ 99.999 ≤ 3 ≤ 5 absolutely oxide-free, guaranteed bright

Compressed air for compressed air cutting

Minimal compressed air quality ISO 8573-1

Required flow rate 40 m3/h

Maximum particle diameter (class 1 or better) 0.01 µm

Maximum particle density (class 1 or better) 0.01 mg/m3

Maximum residual oil content (class 3 or better) 0.003 mg/m3

Pressure dew point (class 2) -40 °C

Primary pressure dynamic at the machine input 9 bar

Passage dynamic 800 l/min

Primary pressure static at the machine input 10 bar

Machine connection (diameter) 10 mm

Ambient conditions

The ByVention is designed for an industrial environment. It is intended for indoor use only. A condensation of the ByVention is not recommended and can lead to the malfunction of control components. Direct sunlight on system components should be avoided. Operation of the ByVention is guaranteed for the temperature range of 5-43 °C.

Permissible ambient temperatures for ByVention operation Min. ambient temperature 5°C

Max. ambient temperature 43°C

If the ambient temperature at the installation site is below 5 °C, the combined cooling and filtration system must not be switched off. The integrated tank heater will continue to operate and prevent freezing of the cooling water. The ambient temperature at the place of installation must never fall below -5 °C.



EQUIPMENT

CO2 Laser Bylaser 2.200 W

Machine frame made of mineral cast

Movement unit incl. cutting carriage

5 "cutting head with quick release fastener

Automatic nozzle cleaning

Air-conditioned CNC cabinet

Handheld terminal with touchscreen

Integrated remote diagnostics module

Combined cooling and filter unit

Feeding table

Integrated sheet feeder

Cutting table

Unloading table

Discharge tubs under the cutting area and the extraction zone

Preparation for pneumatic cutting

User guide / Documentation

Machine parameters

MACHINE PICTURES





FLOOR PLAN


*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

Thank you very much for your interest

KISTNER GmbH & Co. KG | Industriestrasse 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

Documents

BYSTRONIC ByVention 3015 - Kistner Werkzeugmaschinen...In order to avoid risk of contamination by the compressor, an oilfree screw compressor with - a downstream compressed air treatment