2
Belcor ® 575 – the Proven, TESTABLE, All-Organic Corrosion Inhibitor Alternative to Higher Cost Sodium Molybdate Experiencing the skyrocketing cost of sodium molybdate? Are bottom line profits being eroded by rising and unpredictable molybdate pricing? Regain profit margin by switching to Belcor 575. With Belcor 575 you get improved corrosion performance and a far better ‘cost to use’ profile. Belcor 575 can restore the profitability of water treatment programs hit by spiralling sodium molybdate costs. Cost of Molybdate Tracing Ions Tracing ions like sodium molybdate just add to cost of goods sold, end user costs, and reduce the competitive edge of the water treatment company. The cost per lb of sodium molybdate is now more than twice what is was a year ago. Using molybdate as a tracing ion is becoming prohibitively expensive. For example; use of 5% sodium molybdate in a formulation would cost $225 per drum (100 ppm of formulation to give 5 ppm of molybdate in the system water at a cost of $9.00 per lb ($19.84/kg) in a 500lb (225kg approx) drum of formulation. Replace sodium molybdate with Belcor 575 weight for weight and save at least $120 per drum! If the cost of sodium molybdate rises even more the savings with Belcor 575 are even greater. The cost of sodium molybdate fluctuates widely as it is mined and speculated on world metals exchanges while Belcor 575, a manufactured corrosion inhibitor, has never experienced these wild fluctuations in price. In addition, Belcor 575 is a well known ferrous metal corrosion inhibitor. Why pay exorbitant prices for tracing ions when you can pay substantially less for Belcor 575, a proven, testable direct corrosion inhibitor. Performance of Belcor 575 Belcor 575, 50% aqueous hydroxyphosphonoacetic acid, is a unique all-organic corrosion inhibitor specifically developed to meet the demands of modern cooling and water systems. In combination with stabilising and dispersing additives, Belcor 575 is a powerful tool in the formulation of high performance corrosion inhibitor programs. The following example illustrates the performance benefits and cost reduction potential of replacing 10 ppm sodium molybdate used as a corrosion inhibitor with just 5 ppm of Belcor 575 for a high cycle scaling but also highly corrosive water. Additive Molybdate formulation (ppm as product) Belcor 575 formulation (ppm as product Molybdate 10 - Belcor 575 - 5 Belclene ® 660 (HEDP) 5 - Belclene 283 10 10 Water 75 85 Water Chemistry: 700 ppm Ca, M alk 325 ppm (both as CaCO 3) , pH 8.9, Cl - 497 ppm, SO 4 2- 350 ppm, LSI =2.43, Larson Skold corrosion index = 3.38, 40 o C, 10,000 BTU/hr/ft 2 0 2 4 6 8 10 12 14 16 18 Molybdate formulation Belcor 575 formulation mpy heat exchanger mpy coupon Product Information

BWA Belcor 575 Replaces Molybdate USA - WF 0

Embed Size (px)

Citation preview

Page 1: BWA Belcor 575 Replaces Molybdate USA - WF 0

Belcor® 575 – the Proven, TESTABLE, All-Organic Corrosion InhibitorAlternative to Higher Cost Sodium Molybdate

Experiencing the skyrocketing cost of sodiummolybdate?

Are bottom line profits being eroded by rising andunpredictable molybdate pricing?

Regain profit margin by switching to Belcor 575.

With Belcor 575 you get improved corrosionperformance and a far better ‘cost to use’ profile. Belcor575 can restore the profitability of water treatmentprograms hit by spiralling sodium molybdate costs.

Cost of Molybdate Tracing IonsTracing ions like sodium molybdate just add to cost ofgoods sold, end user costs, and reduce the competitiveedge of the water treatment company.

The cost per lb of sodium molybdate is now more thantwice what is was a year ago. Using molybdate as atracing ion is becoming prohibitively expensive.

For example; use of 5% sodium molybdate in aformulation would cost $225 per drum (100 ppm offormulation to give 5 ppm of molybdate in the systemwater at a cost of $9.00 per lb ($19.84/kg) in a 500lb(225kg approx) drum of formulation.

Replace sodium molybdate with Belcor 575 weight forweight and save at least $120 per drum!

If the cost of sodium molybdate rises even more thesavings with Belcor 575 are even greater.

The cost of sodium molybdate fluctuates widely as it ismined and speculated on world metals exchanges whileBelcor 575, a manufactured corrosion inhibitor, hasnever experienced these wild fluctuations in price. Inaddition, Belcor 575 is a well known ferrous metalcorrosion inhibitor. Why pay exorbitant prices fortracing ions when you can pay substantially less forBelcor 575, a proven, testable direct corrosioninhibitor.

Performance of Belcor 575Belcor 575, 50% aqueous hydroxyphosphonoaceticacid, is a unique all-organic corrosion inhibitorspecifically developed to meet the demands of moderncooling and water systems. In combination withstabilising and dispersing additives, Belcor 575 is apowerful tool in the formulation of high performancecorrosion inhibitor programs. The following exampleillustrates the performance benefits and cost reductionpotential of replacing 10 ppm sodium molybdate usedas a corrosion inhibitor with just 5 ppm of Belcor 575 fora high cycle scaling but also highly corrosive water.

Additive Molybdateformulation(ppm asproduct)

Belcor 575formulation(ppm asproduct

Molybdate 10 -Belcor 575 - 5Belclene

®660

(HEDP)5 -

Belclene 283 10 10Water 75 85

Water Chemistry: 700 ppm Ca, M alk 325 ppm (both asCaCO3), pH 8.9, Cl

-497 ppm, SO4

2-350 ppm, LSI

=2.43, Larson Skold corrosion index = 3.38, 40oC,

10,000 BTU/hr/ft2

0

2

4

6

8

10

12

14

16

18

Molybdate formulation Belcor 575 formulation

mpy heat exchanger mpy coupon

Product Information

Page 2: BWA Belcor 575 Replaces Molybdate USA - WF 0

Further additional benefits;• Belcor 575 is an environmentally acceptable additive

in water treatment and has a good biodegradabilityprofile. This makes it especially suited to thosegeographic regions where molybdate discharge isregulated at very low levels.

• Belcor 575 can be formulated to give effective, highperformance all-organic programs. Studies confirmthat Belcor 575 combines well with calcium ions toproduce an effective, tenacious film at cathodic siteson mild steel surfaces. This film suppresses thecathodic corrosion reaction and therefore the overallcorrosion process. The film formed does notinterfere with efficient heat transfer.

• Concerned about molybdate testing versus Belcor575? Belcor 575 is a phosphonate based compoundand therefore widely available standard organo-phosphonate test kits will recognise the Belcor 575molecule. Kits that buffer pH and complex fluorideand halogens are recommended for best accuracy.

PatentsBWA Water Additives (BWA) owns or is the licensee ofpatents and patent applications, which may cover theproducts and/or uses described in this brochure.

The following are registered trademarks of BWABelcor, Belclene, BromiCide, Drop and Swirl logo.

® Registered US Patent and Trademark Office.

© 2006 BWA, All rights reserved.

V0506

If your formulation contains both Belcor 575 andBelclene 660 (HEDP) or other phosphonatematerial, just add the total organo-phosphonateproviders and control the system on the sum of thephosphonate components. For example; if you had5% of molybdate (to give 5ppm) and 3 ppm (active)of HEDP, replace the molybdate with Belcor 575 atthe same concentration i.e. 5%. 5ppm Belcor 575as product will give 2.5ppm as active ingredient +3ppm active HEDP = 5.5ppm of total organicphosphonate

Belcor 575 can be stabilised in the presence ofhalogen based biocides such as sodiumhypochlorite, LiquiBrom

®(sodium bromide), and

BromiCide®

(BCDMH). Contact your localdistributor or BWA Water Additives direct foradvice.

Not sure how to convert a product formulation ortesting regime? Your local distributor or a BWAWater Additives representative can advise.

The faster you upgrade to Belcor 575 themore profit you can return to the bottomline.

Keep the competitive edge upgrade yourtechnology as well as your profit margins.

2 Brightgate W

BWA Water AdditivesEurope and Middle East Region2 Brightgate Way, Cobra CourtStretford, Manchester M32 0TBUnited KingdomTelephone + 44 161 875 3875Fax + 44 161 875 3175

BWA Water AdditivesAmericas Region1979 Lakeside Parkway, Suite 925Tucker, GA 30084USATelephone + 1 678 802 3050Or 800 600 4523Fax + 1 678 802 3024

BWA Water AdditivesAsia Pacific RegionTelok Blangah East PostOfficePO Box 129Singapore 910901Telephone + 65 9758 0554Fax + 65 6234 3606

ay, Manchester M32 0TB, R

Visit our website at: www.wateradditives.com

The information contained in this product sheet is based on data available to BWA Water Additives and is thought to be correct. Since BWA, hasno control over the use of this information by others, BWA does not guarantee the same results described herein will be obtained, and makes nowarranty of merchantability or fitness for a particular purpose or any express or implied warranty. This information is intended for use by technicallytrained personnel at their discretion and risk. BWA Water Additives UK Limited is a private limited company registered in England and Wales at

egistered No. 5657343