Burbage Iron Craft Ltd RETAIL · PDF fileBurbage Iron Craft Ltd RETAIL BROCHURE METAL & WOODEN GATES, ... All metal gates, fence and railing showing this logo are primed in black and

www.burbageironcraft.co.ukTel: 01543 438217

Burbage Iron Craft LtdRETAIL BROCHURE

METAL & WOODENGATES, FENCING & RAILINGS

TB 2

013

V2

ORDERS MUST BE PLACED VIA THETRADE SUPPLIER THAT PROVIDED

YOU WITH THIS BOOKLET,RETAIL CUSTOMERS CANNOT

PLACE ORDERS DIRECTLY WITHBURBAGE IRON CRAFT LTD.

General InformationMEASURINGAll metal range sizes refer to actual openings and not the gate, fence or rail width; we have alreadyallowed for the hinges etc. Wooden range gates are actual physical width.

SPECIAL SIZESA made to measure service is available for gates, railing and fence, where stated. Contact us withyour details on our helpline, fax, or email for a quotation.

FITTINGS PACKSUnless specified, all metal gates, fence and railings are supplied with a pack of screw-on/bolt-onfittings to fix to existing timber, brickwork and the steel posts listed. All gates, fence and railing whichare marked with this icon require a separately purchased fittings pack to fix to metal or timber posts,or brickwork. Where not included, the recommended fittings packs are shown against each designfor separate purchase.

GATE HANGING / LATCHINGPrimed Ranges - All tall single, single, bow tops and Classic / Regent double gates have fixed hinges.All Stirling, Edinburgh doubles, tall doubles and all Corfe / Balmoral gates have adjustable hingesto help with levelling during installation. For timber gates refer to the brochure for hinge details.All tall single, single and bow top gates are supplied with a universal latch for left / right handopening. All Corfe and Balmoral gates have a padlockable sliding bolt on the right hand side whenviewed from the road. For timber gates refer to the brochure for latching details.Zinc Plated Ranges - The universal latch included in the FSTB gate fittings pack can be mounted onsingle, tall single and bow top gates to allow left or right hand opening. The F2DH double gate fittingsallow the latch and drop bolt set to be mounted on either the right or left hand leaf when viewedfrom the road. Single, tall single and bow top gates are padlockable (a padlock is not included in thefittings pack). Fittings pack FSTB (single, tall single and bow top gates) and FD2H (double gates) bothinclude adjustable hinges.

POSTSDue to the weight of the gates, care must be taken to ensure that the brickwork is strong enoughto support them; steel posts which are concreted into the ground are recommended on all largegates.Should you wish to hang gates on steel posts, please be sure to allow for the post widths eg.a 2438mm (8’0” ) opening pair of gates and two 70mm (3’’) posts will fill a 2578mm (8’6” ) gap.

PRIMED ‘PAINT-ME’ RANGESAll metal gates, fence and railing showing this logo are primed in black and after fitting a furthercoat of good quality paint is required. We recommend that the paint should have high rust inhibitingproperties. Regular inspection should take place to ensure the coating is not damaged to preventthe onset of rust. Rust is not considered a manufacture fault and as such does not constitute awarrantee claim. Timber gates are treated with a general-purpose preserver and following installationshould be treated/finished with a quality preserver or varnish after fitting.

ZINC PLATED & POWDER COATED FINISHINGAll Gates, fencing and railings showing the Zinc Plated Range logo are electro-galvanised foradded corrosion resistance with a black powder coat finish. English Rose range products arehot dip galvanised for maximum rust resistance with a black powder coat finish. The coatingcannot be guaranteed due to neglect by the postal service. It is the end customers responsibilityto paint / touch up any coating damage after fitting the item. Rusting is not considered amanufacturing fault and as such does not constitute a warrantee claim.

AVAILABILITY AND DELIVERYMost gates, fence and railing are available ex-stock for 7-10 days UK mainland delivery.Non stocked and Made-to-Measure items 21-28 days UK mainland delivery.Carriage charges apply to all orders.Carriage surcharge for outer lying areas, Highlands, NI and Islands.

IMAGES & SPECIFICATIONSEvery effort has been made to picture the product as accurately as possible, however there areoften slight differences due to changes in product height and width. Images are to give a generalidea of the item. Specifications are subject to change without prior notice. If you are unsure aboutyour size requirements, then please do not hesitate to call our Trade Helpline.

www.burbageironcraft.co.uk

Trade Helpline:01543 438217

Fax: 01543 [email protected]

Unit 16 Mill Park RoadMartindaleHawks Green Industrial EstateCannockStaffordshireWS11 7XT

Classic Double Driveway Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCD10 2134mm (7’0”) 914mm (36”)CD13 2438mm (8’0”) 914mm (36”)CD16 2743mm (9’0”) 914mm (36”)CD19 3048mm (10’0”) 914mm (36”)

Classic Double - Square Metal Post optionsCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge, Concrete-In

Fits: CD10-CD13UP3 70mm (3”) Flat Top, Hinge, Concrete-In

Fits: CD10-CD19

CLASSIC SPECIFICATIONSSolid steel constructionFrames 20mm x 6mm for Singles and Bow TopsFrames 25mm x 6mm for DoublesInfill bars 10mm diameterScrollwork 10mm x 3mm

Classic Tall Bow Top Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCB40 762mm (2’6”) 1753mm (69”)CB41 838mm (2’9”) 1791mm (70.5”)CB42 914mm (3’0”) 1830mm (72”)CB43 991mm (3’3”) 1867mm (73.5”)CB44 1067mm (3’6”) 1905mm (75”)

Classic Bow Top - Square Metal Post optionCODE SIZE STYLEUP2 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

Classic Universal Railing Panel FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTUR06 1830mm (6’0”) 356mm (14”)

Classic Scroll

Classic Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCS2 838mm (2’9”) 914mm (36”)CS3 914mm (3’0”) 914mm (36”)CS4 991mm (3’3”) 914mm (36”)

Classic Single - Square Metal Post optionCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

Classic Low Bow Top Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCLB51 838mm (2’9”) 1181mm (46.5”)CLB52 914mm (3’0”) 1219mm (48”)CLB53 991mm (3’3”) 1257mm (49.5”)

Classic Low Bow - Square Metal Post optionCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

Single

Bow Top

Low Bow

Double

Railing

[email protected] Tel: 01543 438217 Fax:01543 506237

MADE TO MEASURE SERVICE ISNOT AVAILABLE ON THE CLASSIC DESIGN

HENLEY SPECIFICATIONSSolid steel constructionZinc plated with black powder coat finishSingles and Bow Tops Frames 20mm x 6mmDouble, Fence and Railing Frames 25mm x 6mmInfill bars 10mm diameterScrollwork 10mm x 3mm

Henley Single GateCODE FITS OPENING GATE HEIGHTHESB 850-920mm (33.5-36”) 942mm (37”)HESC 920-990mm (36-39”) 942mm (37”)

Henley Single - Square Metal PostsCODE SIZE / STYLETYPE / FITSUSDP 50mm (2”) Flat Top Hinge/Latch Concrete-InUSDB 50mm (2”) Ball Top Hinge/Latch Concrete-In

Henley Double Driveway GateCODE FITS OPENING GATE HEIGHTHEDJ 2420-2500mm (95-98.5”) 942mm (37”)

Henley Double - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Hinge Concrete-InUSDB 50mm (2”) Ball Top Hinge Concrete-In

Henley Scroll

Henley Fence PanelCODE FITS OPENING FENCE HEIGHTHEF1 1830mm (72”) 812mm (32”)

Henley Fence - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Universal Concrete-InUSDB 50mm (2”) Ball Top Universal Concrete-In

Henley Railing PanelCODE FITS OPENING RAILING HEIGHTHER1 1830mm (72”) 393mm (15.5”)

Henley Railing - Square Metal PostsCODE SIZE STYLEUBRP 50mm (2”) Flat Top Universal Bolt DownUPRB 50mm (2”) Ball Top Universal Bolt Down

Henley Bow Top GateCODE FITS OPENING GATE HEIGHTHETB 850-920mm (33.5-36”) 1799mm (71”)HETC 920-990mm (36-39”) 1839mm (72” )

Henley Tall Single - Square Metal PostsCODE SIZE STYLEUTBP 50mm (2”) Flat Top Hinge/Latch Concrete-InUTBB 50mm (2”) Ball Top Hinge/Latch Concrete-In

REQUIRESFITTINGSPACKFD2H

SOLDSEPARATELY

REQUIRESFITTINGSPACKFFRF

SOLDSEPARATELY


SOLDSEPARATELY

DoubleREQUIRESFITTINGSPACKFSTB

SOLDSEPARATELY

Single

PADLOCKABLE

REQUIRESFITTINGSPACKFSTB

SOLDSEPARATELY

Bow Top

PADLOCKABLE

Fence

Railing

MADE TO MEASURE SERVICE AVAILABLE� Zinc plated & powder coated = 28 days� Cheaper primed & painted = 10-15 days


Regent Bow Top Tall Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTRB40 762mm (2’6”) 1753mm (69”)RB41 838mm (2’9”) 1791mm (70.5”)RB42 914mm (3’0”) 1830mm (72”)RB43 991mm (3’3”) 1867mm (73.5”)RB44 1067mm (3’6”) 1905mm (75”)

Regent Bow Top - Square Metal Post optionCODE SIZE STYLEUP2 50mm (2”) Flat Top, Hinge/Latch, Concrete-in

Regent Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTRS2 838mm (2’9”) 914mm (36”)RS3 914mm (3’0”) 914mm (36”)RS4 991mm (3’3”) 914mm (36”)

Regent Single - Square Metal Post optionCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

REGENT SPECIFICATIONSSolid steel constructionFrames 20mm x 6mm for Singles and Bow TopsFrames 25mm x 6mm for DoublesInfill bars 10mm diameterScrollwork 10mm x 3mm

Regent Double Driveway Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTRD10 2134mm (7’0”) 914mm (36”)RD13 2438mm (8’0”) 914mm (36”)RD16 2743mm (9’0”) 914mm (36”)RD19 3048mm (10’0”) 914mm (36”)

Regent Double - Square Metal Post optionsCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge, Concrete-In

Fits: RD10-RD13UP3 70mm (3”) Flat Top, Hinge, Concrete-In

Fits: RD10-RD19

Regent Popular Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTPR06 1830mm (6’0”) 457mm (18”)

Regent Scroll

MADE TO MEASURE SERVICE ISNOT AVAILABLE ON THE REGENT DESIGN

Single

7Bow Top

8Double

Railing8


Stirling Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTSR06 1830mm (6’0”) 609mm (24”)

Stirling Tall Flat Top FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTST30 762mm (2’6”) 1980mm (78”)ST32 914mm (3’0”) 1980mm (78”)ST34 1067mm (3’6”) 1980mm (78”)ST36 1220mm (4’0”) 1980mm (78”)

Stirling Tall Single - Square Metal PostsCODE SIZE STYLEMP05H 50mm (2”) Flat Top, Hinge

Concrete-In ST30-ST32MP05L 50mm (2”) Flat Top, Latch

Concrete-In ST30-ST32MP06H 70mm (3”) Flat Top, Hinge

Concrete-In ST30-ST36MP06L 70mm (3”) Flat Top, Latch

Concrete-In ST30-ST36

Stirling Single FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTST01 762mm (2’6”) 914mm (36”)ST03 914mm (3’0”) 914mm (36”)ST05 1067mm (3’6”) 914mm (36”)ST07 1220mm (4’0”) 914mm (36”)Stirling Single - Square Metal PostsCODE SIZE STYLEMP01H 50mm (2”) Flat Top Hinge

Concrete-InMP01L 50mm (2”) Flat Top Latch

Concrete-In

Stirling Double Driveway Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTST10 2134mm (7’0”) 914mm (36”)ST13 2438mm (8’0”) 914mm (36”)ST16 2743mm (9’0”) 914mm (36”)ST19 3048mm (10’0”) 914mm (36”)ST22 3353mm (11’0”) 914mm (36”)ST25 3658mm (12’0”) 914mm (36”)

Stirling Tall Bow Top FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTST40 762mm (2’6”) 1755mm (69”)ST42 914mm (3’0”) 1830mm (72”)ST44 1067mm (3’6”) 1905mm (75”)ST46 1220mm (4’0”) 1980mm (78”)

Stirling Bow Top - Square Metal PostsCODE SIZE STYLEMP02H 50mm (2”) Flat Top Hinge

Concrete-In ST40-ST42MP02L 50mm (2”) Flat Top Latch

Concrete-In ST40-ST42MP04H 70mm (3”) Flat Top Hinge

Concrete-In ST40-ST46MP04L 70mm (3”) Flat Top Latch

Concrete-In ST40-ST46

NB Gate heights taken to top of scroll

STIRLING SPECIFICATIONSSolid steel constructionFrames - Single, Tall Single, Bow Top and Railing 25mm x 6mmGates 3’6” and over 25mm x 10mmDouble gates frames 25mm x 10mmInfill bars 10mm diameter,Scrollwork 10mm x 3mmTall Double Frames 30mm x 10mm,Infill bars 12mm diameter,Scrollwork 10mm x 3mm

Stirling Double - Square Metal PostsCODE SIZE STYLEMP03 70mm (3”) Flat Top Hinge Concrete-In

Stirling ScrollMADE TO MEASURE SERVICE AVAILABLE

Stirling Tall Double Driveway Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTST61 2438mm (8’0”) 1980mm (78”)ST63 3048mm (10’0”) 1980mm (78”)ST65 3658mm (12’0”) 1980mm (78”)Stirling Tall Double - Square Metal PostsCODE SIZE STYLEMP07 70mm (3”) Flat Top Hinge Concrete-In

Railing

Stirling RangeSingle, tall single and bow top posts have fixed lugs ontowhich the gates are bolted. Doubles and tall doubles haveadjustable hinges for levelling on installation.All Double Gates made to order.

Single

Flat TopBow Top

Double

Tall Double


Edinburgh Range PostsSingle, tall single and bow top posts have fixed lugs ontowhich the gates are bolted. Doubles and tall doubles haveadjustable hinges for levelling on installation.All Double Gates made to order.

Double

Edinburgh Single FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTED03 914mm (3’0”) 914mm (36”)ED05 1067mm (3’6”) 914mm (36”)ED07 1220mm (4’0”) 914mm (36”)Edinburgh Single - Square Metal PostsCODE SIZE STYLEMP01H 50mm (2”) Hinge Concrete-InMP01L 50mm (2”) Latch Concrete-In

Edinburgh Bow Top FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTED42 914mm (3’0”) 1830mm (72”)ED44 1067mm (3’6”) 1905mm (75”)ED46 1220mm (4’0”) 1980mm (78”)

Edinburgh Bow Top - Square Metal PostsCODE SIZE STYLEMP02H 50mm (2”) Hinge Concrete-In

ED42MP02L 50mm (2”) Latch Concrete-In

ED42MP04H 70mm (3”) Hinge Concrete-In

ED42-ED46MP04L 70mm (3”) Latch Concrete-In

ED42-ED46

Edinburgh Tall Single FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTED32 914mm (3’0”) 1980mm (78”)ED34 1067mm (3’6”) 1980mm (78”)ED36 1220mm (4’0”) 1980mm (78”)

Edinburgh Tall Single - Square Metal PostsCODE SIZE STYLEMP05H 50mm (2”) Hinge Concrete-In

ED32MP05L 50mm (2”) Latch Concrete-In

ED32MP06H 70mm (3”) Hinge Concrete-In

ED32-ED36MP06L 70mm (3”) Latch Concrete-In

ED32-ED36

Edinburgh Double FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTED10 2134mm (7’0”) 914mm (36”)ED13 2438mm (8’0”) 914mm (36”)ED16 2743mm (9’0”) 914mm (36”)ED19 3048mm (10’0”) 914mm (36”)ED22 3353mm (11’0”) 914mm (36”)ED25 3658mm (12’0”) 914mm (36”)

Edinburgh Double - Square Metal PostsCODE SIZE STYLEMP03 70mm (3”) Hinge Concrete-In

EDINBURGH SPECIFICATIONSSolid steel constructionFrames - Single, Tall Single, Bow Top and Railing 25mm x 6mmGates 3’6” and over 25mm x 10mmDouble gate frames 25mm x 10mmInfill bars 10mm diameterScrollwork 10mm x 3mmTall Double frames 30mm x 10mm,Infill bars 12mm diameterScrollwork 10mm x 3mm

MADE TO MEASURE SERVICE AVAILABLE

Edinburgh Tall Double FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTED61 2438mm (8’0”) 1980mm (78”)ED63 3048mm (10’0”) 1980mm (78”)Edinburgh Tall Double - Square Metal PostsCODE SIZE STYLEMP07 70mm (3”) Hinge Concrete-In

Edinburgh Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTER06 1830mm (6’0”) 395mm (15.5”)

Railing

NB Gate heights taken to top of scroll

Edinburgh Scroll

Bow Top Tall Single

Tall Double

Single


English RosePremium Scroll

English Rose Railing Panel FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTER03 1830mm (6’0”) 670mm (26”)

English Rose Railing - Square Metal PostsCODE SIZE STYLERPB 50mm (2”) Flat Top, Universal, Bolt-Down

ENGLISH ROSE SPECIFICATIONSSolid steel constructionHot Dip Galvanised & Black powder coated.Optional cheaper finish, Primed & Painted for cost and timesaving.Frames 25mm x 10mmInfill bars 12mm diameterLimited stock held, usually made to order.Delivery up to 28 days.

English Rose Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTERS1 900-980mm (35.5 - 38.5” ) 1080mm (42.5”)

English Rose Single - Square Metal PostsCODE SIZE STYLEERSP 76mm (3”) Flat Top Hinge/Latch Concrete-In

English Rose Tall Single FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTERTS1 900-980mm (35.5 - 38.5”) 1960mm (77”)

English Rose Tall Single - Square Metal PostsCODE SIZE STYLEERTP 76mm (3”) Flat Top Hinge/Latch Concrete-In

HOT DIP Galvanised for maximum rust resistance& Black Powder Coated

English Rose Fence Panel FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTER01 1830mm (6’0”) 1080mm (42.5”)

English Rose Fence - Square Metal PostsCODE SIZE STYLEERFP 50mm (2”) Flat Top,Universal, Concrete-In

Single

Tall Single

FenceRailing

MADE TO MEASURESERVICE AVAILABLE


English RosePremium Scroll

ENGLISH ROSE SPECIFICATIONSSolid steel constructionHot Dip Galvanised & Black powder coated.Optional cheaper finish, Primed & Paintedfor cost and time saving.

Frames 25mm x 10mm (7’ to 9’)Frames 30mm x 10mm (10’ to 12’)Infill bars 12mm diameterOnly Made to OrderDelivery up to 28 days

HOT DIP Galvanised for maximum rust resistance& Black Powder Coated

English Rose Double Driveway Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTERD10 2134mm (7’0”) 1080mm (42.5”)ERD12 2438mm (8’0”) 1080mm (42.5”)ERD14 2743mm (9’0”) 1080mm (42.5”)ERD16 3048mm (10’0”) 1080mm (42.5”)ERD18 3353mm (11’0”) 1080mm (42.5”)ERD20 3658mm (12’0”) 1080mm (42.5”)

English Rose Single - Square Metal PostsCODE SIZE STYLEERSP 76mm (3”) Flat Top Hinge Concrete-In

English Rose Tall Double Driveway Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTERTD30 2134mm (7’0”) 1960mm (77”)ERTD32 2438mm (8’0”) 1960mm (77”)ERTD34 2743mm (9’0”) 1960mm (77”)ERTD36 3048mm (10’0”) 1960mm (77”)ERTD38 3353mm (11’0”) 1960mm (77”)ERTD40 3658mm (12’0”) 1960mm (77”)

English Rose Single - Square Metal PostsCODE SIZE STYLEERTP 76mm (3”) Flat Top Hinge Concrete-In

MADE TO MEASURESERVICE AVAILABLE

ENGLISH ROSE RANGE IS HOT DIPGALVANISED FOR MAXIMUM RUSTRESISTANCE, AND BLACK POWDERCOATED. ALTHOUGH EVERY EFFORT ISMADE TO DELIVER THE GOODSWITHOUT DAMAGE TO THE COATINGS,IT IS THE END CUSTOMERSRESPONSIBILITY TO PAINT / TOUCH-UPANY DAMAGE TO THE COATING AFTERFITTING. LIKE ANY METAL PRODUCT, IFTHE COATING IS DAMAGED THENRUSTING WILL OCCUR.


Abbey Fence FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTAB01 1830mm (6’0”) 815mm (32”)

Abbey Fence - Square Metal Post optionCODE SIZE STYLEUP6 50mm (2”) Flat Top, Universal, Concrete-In

ABBEY SPECIFICATIONSSolid steel constructionFrames 25mm x 6mmInfill bars 10mm and 6mm diameter

Abbey Low Bow Top Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTAB52 914mm (3’0”) 1340mm (52.75”)AB53 991mm (3’3”) 1378mm (54.25”)

Abbey Low Bow - Square Metal Post optionCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

Abbey Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTAB06 1830mm (6’0”) 395mm (15.5”)

Abbey Tall Bow Top Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTAB42 914mm (3’0”) 1950mm (76.75”)AB43 991mm (3’3”) 1988mm (78.25”)

Abbey Bow Top - Square Metal Post optionCODE SIZE STYLEUP2 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

Abbey Modern


Abbey Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTAB31 838mm (2’9”) 815mm (32”)AB32 914mm (3’0”) 815mm (32”)AB33 991mm (3’3”) 815mm (32”)

Abbey Single - Square Metal Post optionCODE SIZE STYLEUP1 50mm (2”) Flat Top, Hinge/Latch, Concrete-In

Single

Low Bow Tall Bow

Fence

Railing


VERONA SPECIFICATIONSSolid steel constructionZinc plated with black powder coat finishFrames 25mm x 6mmInfill bars 10mm and 6mm diameter

Verona Single GateCODE FITS OPENING GATE HEIGHTVESB 850-920mm (33.5-36”) 942mm (37” )VESC 920-990mm (36-39”) 942mm (37”)

Verona Single - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top, Hinge/Latch Concrete-InUSDB 50mm (2”) Ball Top, Hinge/Latch Concrete-In

Verona Double Driveway GateCODE FITS OPENING GATE HEIGHTVEDJ 2420-2500mm (95-98.5”) 942mm (37”)

Verona Double - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top, Hinge, Concrete-InUSDB 50mm (2”) Ball Top, Hinge, Concrete-In

Verona Modern

Verona Fence PanelCODE FITS OPENING FENCE HEIGHTVEF1 1830mm (72”) 812mm (32”)

Verona Fence - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top, Universal, Concrete-InUSDB 50mm (2”) Ball Top, Universal, Concrete-In

Verona Railing PanelCODE FITS OPENING RAILING HEIGHTVER1 1830mm (72”) 393mm (15.5”)

Verona Railing - Square Metal PostsCODE SIZE STYLEUBRP 50mm (2”) Flat Top, Universal, Bolt DownUPRB 50mm (2”) Ball Top, Universal, Bolt Down

Verona Tall Single GateCODE FITS OPENING GATE HEIGHTVETB 850-920mm (33.5-36”) 1798mm (71”)VETC 920-990mm (36-39”) 1798mm (71”)

Verona Tall Single - Square Metal PostsCODE SIZE STYLEUTBP 50mm (2”) Flat Top,Hinge/Latch, Concrete-InUTBB 50mm (2”) Ball Top, Hinge/Latch, Concrete-In



SOLDSEPARATELY


SOLDSEPARATELY


SOLDSEPARATELY

Railing

Double

PADLOCKABLE

Single

Tall Single

PADLOCKABLE

Fence


SOLDSEPARATELY


SOLDSEPARATELY


Manor Ball Top

Manor Arch Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTMA04 1830mm (6’0”) 622mm (24.5”)

Manor Flat Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTMA03 1830mm (6’0”) 457mm (18”)

Manor Railing - Square Metal Posts for MA03 & MA04CODE SIZE STYLEIRB 50mm (2”) Flat Top, In-Line, Bolt-DownCRB 50mm (2”) Flat Top, Corner, Bolt-DownIRBB 50mm (2”) Ball Top, In-Line, Bolt-DownCRBB 50mm (2”) Ball Top, Corner, Bolt-Down

Manor Fence FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTMA01 1830mm (6’0”) 914mm (36”)MA02 1830mm (6’0”) 1220mm (48”)

Manor 914mm Fence - Square Metal PostFits: MA01 & MA07CODE SIZE STYLEUFC 50mm (2”) Flat Top, Universal, Concrete-InUFB 50mm (2”) Flat Top, Universal, Bolt-DownUFCB 50mm (2”) Ball Top, Universal, Concrete-InUFBB 50mm (2”) Ball Top, Universal, Bolt-Down

Manor 1220mm Fence - Square Metal PostFits: MA02 & MA08CODE SIZE STYLEIFC/4 50mm (2”) Flat Top, In-line, Concrete-InCFC/4 50mm (2”) Flat Top, Corner, Concrete-InIFC/4B 50mm (2”) Ball Top, In-line, Concrete-InCFC/4B 50mm (2”) Ball Top, Corner, Concrete-In

MANOR SPECIFICATIONSSolid steel constructionFrames 25mm x 10mmInfill bars 12mm diameter

Manor Arch Fence FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTMA07 1830mm (6’0”) 914mm (36”)MA08 1830mm (6’0”) 1220mm (48”)

1220mm high Fence panels, Arched Fence andArched Railings are often made to order, thusdelivery can be up to 28 days.

Call our Trade Helpline to confirm stockholding and delivery times.

Arch Fence

Flat Railing

Arch Railing

Flat Railing

MADE TO MEASURE SERVICE AVAILABLEON ENTIRE MANOR RANGE

Fence

Optional use of Fencing as a Railing panel


Manor Tall Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTMA30 762mm (2’6”) 1943mm (76.5”)MA32 914mm (3’0”) 1943mm (76.5”)MA34 1067mm (3’6”) 1943mm (76.5”)MA36 1220mm (4’0”) 1943mm (76.5”)

Manor Tall Single - Square Metal Post optionsCODE SIZE STYLEMP06H 70mm (3”) Flat Top, Hinge, Concrete-InMP06L 70mm (3”) Flat Top, Latch, Concrete-In

Manor Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTMA05/1 762mm (2’6”) 914mm (36”)MA05/3 914mm (3’0”) 914mm (36”)MA05/5 1067mm (3’6”) 914mm (36”)

MA06/1 762mm (2’6”) 1220mm (48”)MA06/3 914mm (3’0”) 1220mm (48”)MA06/5 1067mm (3’6”) 1220mm (48”)

Manor Single - Square Metal Post optionsCODE SIZE STYLEUFC 50mm (2”) Flat Top, Hinge/Latch, Concrete-In MA05UFCB 50mm (2”) Ball Top, Hinge/Latch, Concrete-In MA05UGC/4 50mm (2”) Flat Top, Hinge/Latch, Concrete-In MA06UGC/4B 50mm (2”) Ball Top, Hinge/Latch, Concrete-In MA06

Manor Arched Double Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTMA10 2134mm (7’0”) 1220mm (48”)MA13 2438mm (8’0”) 1220mm (48”)MA16 2743mm (9’0”) 1220mm (48”)MA19 3048mm (10’0”) 1220mm (48”)MA22 3353mm (11’0”) 1220mm (48”)MA25 3658mm (12’0”) 1220mm (48”)Gate height to top of arch, side height is 815mm.

Manor Arched Double - Square Metal PostCODE SIZE STYLEMP03 70mm (3”) Flat Top, Hinge, Concrete-In

Fits: MA10-MA25, MA40-MA55


Manor Flat Double Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTMA40 2134mm (7’0”) 914mm (36”)MA43 2438mm (8’0”) 914mm (36”)MA46 2743mm (9’0”) 914mm (36”)MA49 3048mm (10’0”) 914mm (36”)MA52 3353mm (11’0”) 914mm (36”)MA55 3658mm (12’0”) 914mm (36”)

CODE FITS OPENING GATE HEIGHTMA60 2134mm (7’0”) 1220mm (48”)MA63 2438mm (8’0”) 1220mm (48”)MA66 2743mm (9’0”) 1220mm (48”)MA69 3048mm (10’0”) 1220mm (48”)MA72 3353mm (11’0”) 1220mm (48”)MA75 3658mm (12’0”) 1220mm (48”)

Manor Doubles and Arch Doubles are usually made to order,thus delivery can be up to 28 days.Call our Trade Helpline to confirm stock holding and deliverytimes.

Manor Ball Top

Arched Double

Single

Tall Single

Flat Double


Manor 48” high Flat Double - Square Metal PostCODE SIZE STYLEMP08 70mm (3”) Flat Top, Hinge, Concrete-In

Fits: MA60 -MA75

WESTON SPECIFICATIONSSolid steel constructionZinc plated with black powder coat finishFrames 25mm x 8mmInfill bars 12mm diameter

Weston Single GateCODE FITS OPENING GATE HEIGHTWESB 850-920mm (33.5-36”) 1041mm (41”)WESC 920-990mm (36-39”) 1041mm (41”)

Weston Single - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Hinge/Latch Concrete-InUSDB 50mm (2”) Ball Top Hinge/Latch Concrete-In

Weston Double Driveway GateCODE FITS OPENING GATE HEIGHTWEDJ 2420-2500mm (95-98.5”) 1041mm (41”)

Weston Double - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Hinge Concrete-InUSDB 50mm (2”) Ball Top Hinge Concrete-In

Weston Ball Top

Weston Fence PanelCODE FITS OPENING FENCE HEIGHTWEF1 1830mm (72”) 911mm (36”)

Weston Fence - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Universal Concrete-InUSDB 50mm (2”) Ball Top Universal Concrete-In

Weston Railing PanelCODE FITS OPENING RAILING HEIGHTWER1 1830mm (72”) 460mm (18”)

Weston Railing - Square Metal PostsCODE SIZE STYLEUBRP 50mm (2”) Flat Top Universal Bolt DownUPRB 50mm (2”) Ball Top Universal Bolt Down

Weston Tall Single GateCODE FITS OPENING GATE HEIGHTWETB 850-920mm (33.5-36”) 1897mm (75”)WETC 920-990mm (36-39”) 1897mm (75”)

Weston Tall Single - Square Metal PostsCODE SIZE STYLEUTBP 50mm (2”) Flat Top Hinge/Latch Concrete-InUTBB 50mm (2”) Ball Top Hinge/Latch Concrete-In


PADLOCKABLE

PADLOCKABLE


SOLDSEPARATELY


SOLDSEPARATELY


SOLDSEPARATELY


SOLDSEPARATELY


SOLDSEPARATELY

Single

Double

Tall SingleRailing

Fence


WARWICK SPECIFICATIONSSolid steel constructionZinc plated with black powder coat finishFrames 25mm x 8mmInfill bars 12mm diameter

Warwick Single GateCODE FITS OPENING GATE HEIGHTWASB 850-920mm (33.5-36”) 1076mm (42”)WASC 920-990mm (36-39”) 1076mm (42”)

Warwick Single - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Hinge/Latch Concrete-InUSDB 50mm (2”) Ball Top Hinge/Latch Concrete-In

Warwick Double Driveway GateCODE FITS OPENING GATE HEIGHTWADJ 2420-2500mm (95-98.5”) 1076mm (42”)

Warwick Double - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Hinge Concrete-InUSDB 50mm (2”) Ball Top Hinge Concrete-In

Warwick Spear Top

Warwick Fence PanelCODE FITS OPENING FENCE HEIGHTWAF1 1830mm (72”) 946mm (37”)

Warwick Fence - Square Metal PostsCODE SIZE STYLEUSDP 50mm (2”) Flat Top Universal Concrete-InUSDB 50mm (2”) Ball Top Universal Concrete-In

Warwick Railing PanelCODE FITS OPENING RAILING HEIGHTWAR1 1830mm (72”) 495mm (19.5”)

Warwick Railing - Square Metal PostsCODE SIZE STYLEUBRP 50mm (2”) Flat Top Universal Bolt DownUPRB 50mm (2”) Ball Top Universal Bolt Down

Warwick Tall Single GateCODE FITS OPENING GATE HEIGHTWATB 850-920mm (33.5-36”) 1932mm (76” )WATC 920-990mm (36-39”) 1932mm (76”)

Warwick Tall Single - Square Metal PostsCODE SIZE STYLEUTBP 50mm (2”) Flat Top Hinge/Latch Concrete-InUTBB 50mm (2”) Ball Top Hinge/Latch Concrete-In


SOLDSEPARATELY


SOLDSEPARATELY


SOLDSEPARATELY

PADLOCKABLE


SOLDSEPARATELY

PADLOCKABLE

Single


SOLDSEPARATELY

Tall Single

Railing

Fence

Double



Saxon Spear Top

SAXON SPECIFICATIONSSolid steel constructionFrames 25mm x 10mmInfill bars 12mm diameter

Saxon Arch Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTSA04 1830mm (6’0”) 662mm (26”)

Saxon Flat Railing FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTSA03 1830mm (6’0”) 495mm (19.5”)

Saxon Railing - Square Metal Posts for MA03 & MA04CODE SIZE STYLEIRB 50mm (2”) Flat Top, In-Line, Bolt-DownCRB 50mm (2”) Flat Top, Corner, Bolt-DownIRBB 50mm (2”) Ball Top, In-Line, Bolt-DownCRBB 50mm (2”) Ball Top, Corner, Bolt-Down

Saxon 954mm Fence - Square Metal PostFits SA01 & SA07CODE SIZE STYLEUFC 50mm (2”) Flat Top, Universal, Concrete-InUFB 50mm (2”) Flat Top, Universal, Bolt-DownUFCB 50mm (2”) Ball Top, Universal, Concrete-InUFBB 50mm (2”) Ball Top, Universal, Bolt-Down

Saxon 1257mm Fence - Square Metal PostFits SA02 & SA08CODE SIZE STYLEIFC/4 50mm (2”) Flat Top, In-line, Concrete-InCFC/4 50mm (2”) Flat Top, Corner, Concrete-InIFC/4B 50mm (2”) Ball Top, In-line, Concrete-InCFC/4B 50mm (2”) Ball Top, Corner, Concrete-In

Optional use of Fencing as a Railing panel

Saxon Fence Panel FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTSA01 1830mm (6’0”) 954mm (36”)SA02 1830mm (6’0”) 1257mm (48”)

Saxon Arch Fence Panel FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTSA07 1830mm (6’0”) 954mm (36”)SA08 1830mm (6’0”) 1257mm (48”)

1257mm high Fence panels, Arched Fence andArched Railings are often made to order, thusdelivery can be up to 28 days.

Call our Trade Helpline to confirm stockholding and delivery times.

Arch Railing

Flat Railing

Fence

Arch Fence



Saxon Arched Double Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTSA10 2134mm (7’0”) 1220mm (48”)SA13 2438mm (8’0”) 1220mm (48”)SA16 2743mm (9’0”) 1220mm (48”)SA19 3048mm (10’0”) 1220mm (48”)SA22 3353mm (11’0”) 1220mm (48”)SA25 3658mm (12’0”) 1220mm (48”)Gate height to top of arch, side height is 815mm.

Saxon Arched & Double - Square Metal PostCODE SIZE STYLEMP03 70mm (3”) Flat Top, Hinge, Concrete-In

Fits: SA10-SA25 & SA40-SA55

Saxon Double Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTSA40 2134mm (7’0”) 954mm (37.5”)SA43 2438mm (8’0”) 954mm (37.5”)SA46 2743mm (9’0”) 954mm (37.5”)SA49 3048mm (10’0”) 954mm (37.5”)SA52 3353mm (11’0”) 954mm (37.5”)SA55 3658mm (12’0”) 954mm (37.5”)

CODE FITS OPENING GATE HEIGHTSA60 2134mm (7’0”) 1257mm (49.5”)SA63 2438mm (8’0”) 1257mm (49.5”)SA66 2743mm (9’0”) 1257mm (49.5”)SA69 3048mm (10’0”) 1257mm (49.5”)SA72 3353mm (11’0”) 1257mm (49.5”)SA75 3658mm (12’0”) 1257mm (49.5”)

Saxon Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTSA05/1 762mm (2’6”) 954mm (37.5”)SA05/3 914mm (3’0”) 954mm (37.5”)SA05/5 1067mm (3’6”) 954mm (37.5”)

SA06/1 762mm (2’6”) 1257mm (49.5”)SA06/3 914mm (3’0”) 1257mm (49.5”)SA06/5 1067mm (3’6”) 1257mm (49.5”)

Saxon Single & Double - Square Metal Post optionsCODE SIZE STYLEUFC 50mm (2”) Flat Top, Hinge/Latch, Concrete-In SA05UFCB 50mm (2”) Ball Top, Hinge/Latch, Concrete-In SA05UGC/4 50mm (2”) Flat Top, Hinge/Latch, Concrete-In SA06UGC/4B 50mm (2”) Ball Top, Hinge/Latch, Concrete-In SA06

Saxon Tall Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTSA30 762mm (2’6”) 1980mm (78”)SA32 914mm (3’0”) 1980mm (78”)SA34 1067mm (3’6”) 1980mm (78”)SA36 1220mm (4’0”) 1980mm (78”)

Saxon Tall Single - Square Metal Post optionsCODE SIZE STYLEMP06H 70mm (3”) Flat Top, Hinge, Concrete-InMP06L 70mm (3”) Flat Top, Latch, Concrete-In

Double

Saxon Spear Top

Arch Double

Single

Saxon Doubles and Arch Doubles are usually made to order,thus delivery can be up to 28 days.Call our Trade Helpline to confirm stock holding and deliverytimes.

Tall Single



Saxon 48” high Flat Double - Square Metal PostCODE SIZE STYLEMP08 70mm (3”) Flat Top, Hinge, Concrete-In

Fits: SA60 -SA75

Corfe Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCF01 762mm (2’6”) 1168mm (46”)CF03 914mm (3’0”) 1168mm (46”)CF04 991mm (3’3”) 1168mm (46”)CF05 1067mm (3’6”) 1168mm (46”)

Corfe Single - Square Metal PostsCODE SIZE STYLEMP15H 70mm (3”) Flat Top, Hinge

Concrete-InMP15L 70mm (3”) Flat Top, Latch

Concrete-In

Corfe Low Double Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCF10 2134mm (7’0”) 1168mm (46”)CF13 2438mm (8’0”) 1168mm (46”)CF16 2743mm (9’0”) 1168mm (46”)CF19 3048mm (10’0”) 1168mm (46”)CF22 3353mm (11’0”) 1168mm (46”)CF25 3658mm (12’0”) 1168mm (46”)

Corfe Double - Square Metal PostsCODE SIZE STYLEMP15H 70mm (3”) Flat Top, Hinge

Concrete-In CF10-CF16MP21H 100mm (4”) Flat Top, Hinge

Concrete-In CF10-CF25

CORFE SPECIFICATIONSSolid steel constructionHeavy duty 25mm x 25mm box section framesInfill bars 16mm diameterBow Frame 25mm x 10mm on Tall Split Bow

Corfe Premium Spear Top MADE TO MEASURE SERVICE AVAILABLE

Corfe InformationCorfe gates have adjustable hinges for levelling on installation.All Corfe gates have the closing bolt on the right hand side when viewedfrom the road.Corfe Spear heads are primed black, not as pictured.Corfe range usually made to order, delivery up to 28 days, call the TradeHelpline to confirm stock levels and delivery times.

Double

Corfe Tall Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCF30 762mm (2’6”) 1778mm (70”)CF32 914mm (3’0”) 1778mm (70”)CF33 991mm (3’3”) 1778mm (70”)CF34 1067mm (3’6”) 1778mm (70”)

Corfe Tall Single - Square Metal PostsCODE SIZE STYLEMP18H 70mm (3”) Flat Top, Hinge

Concrete-InMP18L 70mm (3”) Flat Top, Latch

Concrete-In Tall Single

Single


CORFE SPECIFICATIONSSolid steel constructionHeavy duty 25mm x 25mm box section framesInfill bars 16mm diameterBow Frame 25mm x 10mm on Tall Split Bow

Corfe Premium Spear Top MADE TO MEASURE SERVICE AVAILABLE

Corfe InformationCorfe gates have adjustable hinges for levelling on installation.All Corfe gates have the closing bolt on the right hand side when viewedfrom the road.Corfe Spear heads are primed black, not as pictured.Corfe range usually made to order, delivery up to 28 days, call the TradeHelpline to confirm stock levels and delivery times.

Corfe Tall Double FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCF60 2134mm (7’0”) 1778mm (70”)CF61 2438mm (8’0”) 1778mm (70”)CF62 2743mm (9’0”) 1778mm (70”)CF63 3048mm (10’0”) 1778mm (70”)CF64 3353mm (11’0”) 1778mm (70”)CF65 3658mm (12’0”) 1778mm (70”)

Corfe Tall Double - Square Metal PostsCODE SIZE STYLEMP18H 70mm (3”) Hinge Concrete-In

CF60-CF62MP23H 100mm (4”) Hinge Concrete-In

CF60-CF65

Corfe Tall Split Bow FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCF90 2134mm (7’0”) 2083mm (82”)CF91 2438mm (8’0”) 2083mm (82”)CF92 2743mm (9’0”) 2083mm (82”)CF93 3048mm (10’0”) 2083mm (82”)CF94 3353mm (11’0”) 2083mm (82”)CF95 3658mm (12’0”) 2083mm (82”)

Corfe Tall Split Bow - Square Metal PostsCODE SIZE STYLEMP18H 70mm (3”) Hinge Concrete-In

CF90-CF91MP23H 100mm (4”) Hinge Concrete-In

CF90-CF95

Tall Double

Split Bow


Balmoral InformationBalmoral gates have adjustable hinges for levelling on installation.All Balmoral gates have the closing bolt on the right hand side whenviewed from the road.Balmoral Spear heads are primed black, not as pictured.Balmoral range usually made to order, delivery up to 28 days, call theTrade Helpline to confirm stock levels and delivery times.

BALMORAL SPECIFICATIONSSolid steel constructionHeavy duty 40mm x 10mm framesInfill bars 16mm diameterTall Double gate hanging stiles 40mm x 30mm

Balmoral Premium Spear Top MADE TO MEASURE SERVICE AVAILABLE

Balmoral Tall Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTBA32 914mm (3’0”) 1905mm (75”)BA34 1067mm (3’6”) 1905mm (75”)

Balmoral Tall Single - Square Metal PostsCODE SIZE STYLEMP18H 70mm (3”) Hinge Concrete-InMP18L 70mm (3”) Latch Concrete-InorMP23H 100mm (4”) Hinge Concrete-InMP23L 100mm (4”) Latch Concrete-In

Balmoral Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTBA03 914mm (3’0”) 1168mm (46”)BA05 1067mm (3’6”) 1168mm (46”)

Balmoral Single - Square Metal PostsCODE SIZE STYLEMP15H 70mm (3”) Flat Top, Hinge Concrete-InMP15L 70mm (3”) Flat Top, Latch Concrete-InorMP21H 100mm (4”) Flat Top, Hinge Concrete-InMP21L 100mm (4”) Flat Top, Latch Concrete-In

Balmoral Arched Railing PanelFITTINGS INCLUDEDCODE FITS OPENING PANEL HEIGHTBAP06 1830mm (6’0”) 735mm (29”)

Balmoral Railing Panel FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTBAR06 1830mm (6’0”) 559mm (22”)

Single

Arched Railing

Tall Single

Railing


Balmoral InformationBalmoral gates have adjustable hinges for levelling on installation.All Balmoral gates have the closing bolt on the right hand side whenviewed from the road.Balmoral Spear heads are primed black, not as pictured.Balmoral range usually made to order, delivery up to 28 days, call theTrade Helpline to confirm stock levels and delivery times.

BALMORAL SPECIFICATIONSSolid steel constructionHeavy duty 40mm x 10mm framesInfill bars 16mm diameterTall Double gate hanging stiles 40mm x 30mm

Balmoral Premium Spear Top MADE TO MEASURE SERVICE AVAILABLE

Balmoral Low Double Driveway GateFITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTBA10 2134mm (7’0”) 1168mm (46”)BA13 2438mm (8’0”) 1168mm (46”)BA15 2743mm (9’0”) 1168mm (46”)BA19 3048mm (10’0”) 1168mm (46”)BA20 3353mm (11’0”) 1168mm (46”)BA21 3658mm (12’0”) 1168mm (46”)

Balmoral Double - Square Metal PostsCODE SIZE STYLEMP15H 70mm (3”) Hinge, Concrete-In

Fits: BA10-BA15MP21H 100mm (4”) Hinge, Concrete-In

Fits: BA10-BA21Low Double

Balmoral Tall Split Bow Double GateFITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTBA90 2134mm (7’0”) 2082mm (82”)BA91 2438mm (8’0”) 2082mm (82”)BA92 2743mm (9’0”) 2082mm (82”)BA93 3048mm (10’0”) 2082mm (82”)BA94 3353mm (11’0”) 2082mm (82”)BA95 3658mm (12’0”) 2082mm (82”)

Balmoral Tall Double - Square Metal PostsCODE SIZE STYLEMP23H 100mm (4”) Hinge, Concrete-In

BA90-BA92MP24 150mm (6”) Hinge, Concrete-In

BA90-BA95

Split Bow


Village Fencing System

V20 Fittings PackScrew-on gate fittings forfixing to timber or masonry

V21 Fittings PackClamp-on gate fittings forfixing to round metal posts

V23 Fittings PackClamp-on fence/railing fittingsfor fixing to round metal posts

VILLAGE SPECIFICATIONSSolid steel constructionFrames 25 x 6mm flat barIn-fill bars 10mm diameterZinc plated with dark green powder coat finish.Railheads with antique gold effect

Zinc plated withdark green powder

coat finish.Railheads withantique gold

effect

Village 3’9” FenceCODE FITS OPENING FENCE HEIGHTV02 1143mm (3’9”) 914mm (36”)Village Fence - Round Metal PostsCODE SIZE STYLEV06 50mm (2”) Ball Top Concrete-InV08 50mm (2”) Ball Top Bolt-Down

Village 6’ FenceCODE FITS OPENING FENCE HEIGHTV01 1830mm (6’0”) 914mm (36”)Village Fence - Round Metal PostsCODE SIZE STYLEV06 50mm (2”) Ball Top Concrete-InV08 50mm (2”) Ball Top Bolt-Down

Village 6’ RailingCODE FITS OPENING RAILING HEIGHTV03 1830mm (6’0”) 508mm (20”)Village Railing - Round Metal PostsCODE SIZE / STYLE TYPEV07 50mm (2”) Ball Top Concrete-InV09 50mm (2”) Ball Top Bolt-Down

Village 3’9” RailingCODE FITS OPENING RAILING HEIGHTV04 1143mm (3’9”) 508mm (20”)Village Railing - Round Metal PostsCODE SIZE STYLEV07 50mm (2”) Ball Top Concrete-InV09 50mm (2”) Ball Top Bolt-Down

ROUNDMETAL POSTS

REQUIRESFITTINGSPACKV20

SOLDSEPARATELY

MASONRY &TIMBERVillage 3’ Gate

CODE FITS OPENING GATE HEIGHTV05 914mm (3’0”) 914mm (36”)Village Gate - Round Metal PostsCODE SIZE STYLEV06 50mm (2”) Ball Top Concrete-InV08 50mm (2”) Ball Top Bolt-Down

MADE TO MEASURE SERVICE ISNOT AVAILABLE ON VILLAGE

V04 Railing

V22 Fittings PackScrew-on fence/railing fittingsfor fixing to timber/masonry

Gate

V03 Railing

V01 Fence V02 Fence


SOLDSEPARATELY

ROUNDMETAL POSTS


SOLDSEPARATELY

MASONRY &TIMBER


SOLDSEPARATELY

ROUNDMETAL POSTS


SOLDSEPARATELY

MASONRY &TIMBER


SOLDSEPARATELY


Court Single Gate FITTINGS INCLUDEDCODE FITS OPENING GATE HEIGHTCR05 1000mm (3’3”) 950mm (37”)

Court Single - Square Metal PostsCODE SIZE STYLEUFC 50mm (2”) Flat Top, Universal, Concrete-InUFCB 50mm (2”) Ball Top, Universal, Concrete-In

COURT SPECIFICATIONSSolid steel constructionFrames 25mm x 10mmInfill bars 12mm diameterGap between bars 112mm

Court Railing Panel FITTINGS INCLUDEDCODE FITS OPENING RAILING HEIGHTCR03 1830mm (6’0”) 492mm (19”)

Court Railing - Square Metal PostsCODE SIZE / STYLE TYPEIRB 50mm (2”) Flat Top, In-Line, Bolt-DownCRB 50mm (2”) Flat Top, Corner, Bolt-DownIRBB 50mm (2”) Ball Top, In-Line, Bolt-DownCRBB 50mm (2”) Ball Top, Corner, Bolt-Down

Court Hoop Top

Court Fence Panel FITTINGS INCLUDEDCODE FITS OPENING FENCE HEIGHTCR01 1830mm (6’0”) 950mm (37”)

Court Fence - Square Metal PostsCODE SIZE STYLEUFC 50mm (2”) Flat Top, Universal, Concrete-InUFB 50mm (2”) Flat Top, Universal, Bolt-DownUFCB 50mm (2”) Ball Top, Universal, Concrete-InUFBB 50mm (2”) Ball Top, Universal, Bolt-Down

Court Fence - Sections FITTINGS INCLUDEDCODE HOOPS FITS OPENING FENCE HEIGHTCRF1H 1 Hoop 270mm (11”) 950mm (37”)CRF2H 2 Hoops 490mm (19”) 950mm (37”)CRF3H 3 Hoops 720mm (28”) 950mm (37”)CRF4H 4 Hoops 940mm (37”) 950mm (37”)CRF5H 5 Hoops 1170mm (46”) 950mm (37”)CRF6H 6 Hoops 1390mm (54”) 950mm (37”)CRF7H 7 Hoops 1610mm (63”) 950mm (37”)

Court Railing - Sections FITTINGS INCLUDEDCODE HOOPS FITS OPENING RAILING HEIGHTCRR1H 1 Hoop 270mm (11”) 492mm (19”)CRR2H 2 Hoops 490mm (19”) 492mm (19”)CRR3H 3 Hoops 720mm (28”) 492mm (19”)CRR4H 4 Hoops 940mm (37”) 492mm (19”)CRR5H 5 Hoops 1170mm (46”) 492mm (19”)CRR6H 6 Hoops 1390mm (54”) 492mm (19”)CRR7H 7 Hoops 1610mm (63”) 492mm (19”)

Manor, Saxon & Court Metal Posts

The Court Hoop Top design fence and railing can only be built to fit openings as listed below.These sections are built to order with a lead time of 21-28 days.

Ball Top Finial - Square Metal Post Flat Top Square Metal Post

Single

Railing

Fence


Metal Deck Panels

Garda Deck Panel - pack of 4PACK CODE DPGB COLOUR BLACKHEIGHT 770mm (30.25”) WIDTH 280mm (11”)

Metro Deck Panel - pack of 4PACK CODE DPMB COLOUR BLACKHEIGHT 770mm (30.25”) WIDTH 280mm (11”)

Coast Deck Panel - pack of 4PACK CODE DPCB COLOUR BLACKHEIGHT 770mm (30.25”) WIDTH 280mm (11”)

Swirl Deck Panel - pack of 4PACK CODE DPSS COLOUR SILVERHEIGHT 770mm (30.25”) WIDTH 280mm (11”)

Ascot Deck Panel - pack of 4PACK CODE DPAB COLOUR BLACKHEIGHT 770mm (30.25”) WIDTH 280mm (11”)

Plaza Deck Panel - pack of 4PACK CODE DPPS COLOUR SILVERHEIGHT 770mm (30.25”) WIDTH 280mm (11”)

GardaBlack

AscotBlack

MetroBlack

PlazaSilver

CoastBlack

SwirlSilver

MADE TO MEASURE SERVICE ISNOT AVAILABLE ON DECK PANELS

Garda Ascot

PlazaMetro

Coast Swirl

280mm(11”)

280mm(11”)

280mm(11”)

280mm(11”)

770mm(30 ¼ ”)

770mm(30 ¼ ”)

770mm(30 ¼ ”)

770mm(30 ¼ ”)

DECK PANEL SPECIFICATIONSFor screw fixing between timber posts and hand rails.Solid steel construction.Zinc plated with powder coated finish.16mm x 6mm Flat bar top and base railsInfill bars 10mm diameterScrollwork 10mm x 3mm

EACH PACK: FOUR PANELS TO FORM A RUN OF 1130mmScrews are not included.


Bali Deck Panel - pack of 2PACK CODE DPBS COLOUR SILVERHEIGHT 770mm (30.25”) WIDTH 560mm (22”)

JavaBlack

BaliSilver

Large Metal Deck Panels

LARGE DECK PANELS (FOR FIXING TO BOLT DOWN METAL OR WOODEN DECK DOWN POSTS)Solid steel construction - Zinc plated with powder coat finish40mm x 6mm flat bar top rail, 25mm x 6mm flat bar bottom rail,RIPPLE and DECO Infill bars 10 mm diameterNOVA Infill bars 12mm and 6mm diameter

CODE LPPB Metal Deck PostUniversal 50mm Sq. Bolt-DownSold Separately

Deco, Ripple and Nova metaldeck panels are supplied withbrackets and fittings for fixingto LPPB bolt-down metal posts.Fittings also suitable for fixingto wooden posts.

Java Deck Panel - pack of 2PACK CODE DPJB COLOUR BLACKHEIGHT 770mm (30.25”) WIDTH 560mm (22”)


DECK PANEL SPECIFICATIONSFor screw fixing between timber posts and hand rails.Solid steel construction.Zinc plated with powder coated finish.16mm x 6mm Flat bar top and base railsInfill bars 12mm and 6mm diameter

EACH PACK: TWO PANELS TO FORM A RUN OF 1130mmScrews are not included.

Nova FITTINGS INCLUDEDPANEL CODE LPNB COLOUR BLACKHEIGHT 813mm (32) WIDTH 1130mm (44.5”)

Deco FITTINGS INCLUDEDPANEL CODE LPDB COLOUR BLACKHEIGHT 813mm (32) WIDTH 1130mm (44.5”)

Ripple FITTINGS INCLUDEDPANEL CODE LPRB COLOUR BLACKHEIGHT 813mm (32) WIDTH 1130mm (44.5”)


Java Bali

Deco Ripple

Nova

770mm(30 ¼ ”)

560mm(22”)


Post Supports & Fencing AccessoriesFENCING ACCESSORIES SPECIFICATIONSSolid steel constructionHot Dip Galvanised for maximum rust resistanceNo painting required, (nuts and bolts should be painted)

FIN GRIP POST SUPPORT SPIKECODE SIZE mm PACK DESCRIPTIONFGS756G 75x75x600 5 Fin Grip SpikeFGS757G 75x75x750 5 Fin Grip SpikeFGS107G 100x100x750 5 Fin Grip SpikeBOLT GRIP POST SUPPORT SPIKECODE SIZE mm PACK DESCRIPTIONBGS756G 75x75x600 6 Bolt Grip SpikeBGS757G 75x75x750 6 Bolt Grip SpikeBGS107G 100x100x750 6 Bolt Grip SpikeBGS726G 72x72x600 6 Bolt Grip SpikeBGS927G 92x92x750 6 Bolt Grip Spike

50mm POST SUPPORT SPIKECODE SIZE mm DESCRIPTION PACKPBS504G 50x50x120 Plain Box 450mm long Spike 10EAS001G 50x50x220 Plain Box 450mm long Estate Agent Spike 10

FIN GRIP BOLT-DOWN POST SUPPORTCODE SIZE mm PACK DESCRIPTIONFBD075G 75x75 10 Fin Grip Bolt-DownFBD100G 100x100 8 Fin Grip Bolt-DownBOLT GRIP BOLT-DOWN POST SUPPORTCODE SIZE mm PACK DESCRIPTIONBGB075G 75x75 10 Bolt Grip Bolt-DownBGB100G 100x100 8 Bolt Grip Bolt-DownBGB727G 72x72 10 Bolt Grip Bolt-DownBGB929G 92x92 8 Bolt Grip Bolt-Down50mm BOLT-DOWN POST SUPPORTCODE SIZE mm PACK DESCRIPTIONPBB050G 50x50 10 Plain Box Bolt-DownFIN GRIP CONCRETE-IN POST SUPPORTCODE SIZE mm PACK DESCRIPTIONFGC757G 75x75 10 Fin Grip Concrete-InFGC100G 100x100 10 Fin Grip Concrete-In

Bolt Grip Bolt Down

FIN GRIP REPAIR SPUR POST SUPPORTCODE SIZE mm PACK DESCRIPTIONFGR757G 75x75 10 Fin Grip Repair SpurFGR100G 100x100 10 Fin Grip Repair SpurFIN GRIP POST EXTENDERCODE SIZE mm PACK DESCRIPTIONPEX757G 75x75 10 Fin Grip Post ExtenderPEX100G 100x100 10 Fin Grip Post ExtenderFENCING ACCESSORIESCODE SIZE PACK DESCRIPTIONDRT075 75mm 10 Driving Tool - discontinuedDRT100 100mm 10 Driving Tool - discontinuedUDRT 75mm 5 Universal Driving ToolUCP041G 41mm 250 U ClipsUCP046G 46mm 250 U ClipsUCP052G 52mm 250 U ClipsARB001G 200mm 50 Arris Rail BracketGBC001G 50 Gravel Board ClipBRP001G 50 Boarder Roll PinLCP001G 200 L Clip

Arris RailBracket

Border Roll Pin

GravelBoard Clip

DRT075/100 Driving Tool arediscontinued, UDRT onlyavailable once DRT75 stocksare cleared

U Clip

L Clip

DRTDrivingTool

Fin Grip Post Extender

Fin Grip Bolt Down

Plain Box Bolt-Down

Fin Grip Spike

Bolt Grip Spike

Fin Grip Repair Spur

Plain Box &Estate Agent

Spike

Fin Grip Concrete-In

NEWUDRTDrivingTool


Rose Arches

York Small ArchCODE HEIGHT WIDTH DEPTHYRA42 2134mm 1067mm 305mm

ROSE ARCH SPECIFICATIONSSolid steel infill bars with main frame and arches 16mm diameter tube

York YRA42 & YRA60 Abbey ARA4320 x 6mm crossbar 20 x 6mm crossbar10mm x 3mm scrollwork 10mm round bar infill

6mm round bar pattern work

York Large ArchCODE HEIGHT WIDTH DEPTHYRA60 2032mm 1524mm 305mm

Abbey ArchCODE HEIGHT WIDTH DEPTHARA43 2286mm 1100mm 410mm

York LargeAbbey York Small

Evington Wooden Farm/Field style gateEVINGTON SINGLE FIELD GATE SPECIFICATIONSGates and posts made from European managed forest softwood. Stiles 127 x 75mm, Rails 75 x 25mm, Mortice and tenon joints. Treated with ageneral-purpose preserver which gives protection against decay, mould and blue-staining fungi, should still have a final finish applied

SLGC Self-LockingGate CatchFGTO Field Gate

Throwover LatchFGFBS FieldGate BrickFitting Set

Evington 5 Bar Field GateCODE ACTUAL SIZE GATE HEIGHTEV03 900mm (35.5” ) 1200mm (47.25”)EV07 1200mm (47.3” ) 1200mm (47.25”)EV13S 2400mm (94.5”) 1200mm (47.25”)EV19S 3000mm (118”) 1200mm (47.25”)EV25S 3600mm (141.7”) 1200mm (47.25”)

Evington - Round Top Timber PostsCODE SIZE FITSWP66R 150x150x1800mm EV03-EV25SWP86R 200x200x1800mm EV03-EV25SEV13S-25S

EV03-07

FGSFS FieldGate SpringFastener Set

FGFTS FieldGate Timber

Fitting Set

BSB Bretton Sliding Bolt

NB: All Timber gate sizes are subject to slightvariation due to normal shrinkage/expansion


MADE TO MEASURE SERVICE ISNOT AVAILABLE


Quorn Single Garden GateCODE ACTUAL SIZE GATE HEIGHTQU01 750mm (29.5” ) 900mm (35.5”)QU03 900mm (35.5” ) 900mm (35.5”)QU04 1050mm (41.3” ) 900mm (35.5”)

Quorn Single - Square Top Timber PostsCODE SIZEWP44S 100x100x1350mm

Concrete-in or fix to wallFits: QU01-QU04

QUORN SPECIFICATIONSGates and posts made from Europeanmanaged forest softwoodBracing 75x75mmTongue and groove 110x12mmTreated with a general-purpose preserverwhich gives protection against decay, mouldand blue-staining fungi, should still have finalfinish applied.BIC has a painting service, call for a quotationto have your gate painted.

Bretton Sliding BoltCODE FITSBSB All Gates



Quorn Double Garden GateCODE ACTUAL SIZE GATE HEIGHTQUD10 2400mm (94.5” ) 900mm (35.5”)QUD11 2700mm (106.3”) 900mm (35.5”)QUD12 3000mm (118”) 900mm (35.5”)QUD13 3300mm (130”) 900mm (35.5”)QUD14 3600mm (141.7”) 900mm (35.5”)

Quorn Square(S), Pyramid(P) Top Timber PostsCODE SIZEWP44S 100 x 100 x 1350mm Fits: QUD10-QUD12WP55P 125 x 125 x 1525mm Fits: QUD10-QUD14

Single BackSingle Front

Double

Double Back

Single

Quorn Wooden Gates


Double Gate Fitting Set24” Hook & BandCODE FITSEGFS/BLACK QUD10-QUD14EGFS/GALV QUD10-QUD14

Single Gate Fitting Set18” Hook & BandCODE FITSSGFS/BLACK QU01-QU04SGFS/GALV QU01-QU04

Carlton Square Top SingleCODE ACTUAL SIZE GATE HEIGHTCA30 750mm (29.5” ) 1800mm (71”)CA32 900mm (35.5” ) 1800mm (71”)CA34 1050mm (41.3” ) 1800mm (71”)

Carlton Timber PostCODE SIZE TYPEWP48S 100x100x2400mm Square TopWP48P 100x100x2400mm Pyramid Top

Carlton Bow Top SingleCODE ACTUAL SIZE GATE HEIGHTCA40 750mm (29.5” ) 1800mm (71”)CA42 900mm (35.5” ) 1800mm (71”)CA44 1050mm (41.3” ) 1800mm (71”)


CARLTON SPECIFICATIONSGates and posts made from European managed forest softwood.Bracing 100 x 25mm, Tongue and groove 110 x 12mm,Treated with a general-purpose preserver which givesprotection against decay, mould and blue-staining fungi, should stillhave final finish applied.


Carlton Double Driveway GateCODE ACTUAL SIZE GATE HEIGHTCATD50 1500mm (59”) 1800mm (71”)CATD52 1800mm (71”) 1800mm (71”)CATD54 2100mm (82.5” ) 1800mm (71”)


BSB Bretton Sliding Bolt

Double

Square Single Bow Single


Carlton Wooden Gates


GGFP/BLACKGGFP/GALVDouble Gate

Fitting Set

GGFS/BLACK Single GateGGFS/GALV Fitting Set

Drayton Square Top Wooden GatesDRAYTON SQUARE TOP SPECIFICATIONSGates and posts made from European managed forest softwood.Bracing 75x75mm, Tongue and groove 110x12mmTreated with a general-purpose preserver which gives protection againstdecay, mould and blue-staining fungi, should still have final finish applied.

Drayton Double - Square TopCODE ACTUAL SIZE GATE HEIGHTDR61 2400mm (94.5” ) 1800mm (71”)DR62 2700mm (106.3”) 1800mm (71”)DR63 3000mm (118”) 1800mm (71”)DR64 3300mm (130”) 1800mm (71”)DR65 3600mm (141.7”) 1800mm (71”)Drayton Double - Pyramid Top Timber PostsCODE SIZE FITSWP48P 100x100x2400mm DR61-DR62WP68P 150x150x2400mm DR61-DR65




Drayton Single - Square TopCODE ACTUAL SIZE GATE HEIGHTDR50 750mm (29.5” ) 1800mm (71”)DR52 900mm (35.5” ) 1800mm (71”)DR54 1050mm (41.3” ) 1800mm (71”)Drayton Timber PostCODE SIZE TYPEWP48S 100x100x2400mm Square TopWP48P 100x100x2400mm Pyramid Top

Bracing may vary with width ofgate such that there may only beone angled cross brace.

Double

Double Back

Single


Double Gate Fitting Set24” Hook & BandCODE FITSEGFS/BLACK DR61-DR65EGFS/GALV DR61-DR65

Single Gate Fitting Set18” Hook & BandCODE FITSSGFS/BLACK DR50-DR54SGFS/GALV DR50-DR54

Drayton Double - Shaped TopCODE ACTUAL SIZE CENTRE HEIGHT SIDE HEIGHTDR91 2400mm (94.5” ) 1800mm (71”) 1500mm (59”)DR92 2700mm (106.3”) 1800mm (71”) 1500mm (59”)DR93 3000mm (118”) 1800mm (71”) 1500mm (59”)DR94 3300mm (130”) 1800mm (71”) 1500mm (59”)DR95 3600mm (141.7”) 1800mm (71”) 1500mm (59”)

Drayton Double - Pyramid Top Timber PostsCODE SIZE FITSWP48P 100x100x2400mm DR91-DR92WP68P 150x150x2400mm DR91-DR95

Drayton Shaped Top Wooden Gate


WP68P PyramidTop Post

Shaped Double Back

DRAYTON SHAPED TOP SPECIFICATIONSGates and posts made from European managed forest softwood.Bracing 75x75mm, Tongue and groove 110x12mm,Treated with a general-purpose preserver which gives protection againstdecay, mould and blue-staining fungi, should still have final finish applied.



Shaped Top Double

Low Single

Drayton Low Single - Square TopCODE ACTUAL SIZE GATE HEIGHTDR70 750mm (29.5” ) 1500mm (59”)DR72 900mm (35.5” ) 1500mm (59”)DR74 1050mm (41.3” ) 1500mm (59”)

Drayton Single Timber PostCODE SIZE TYPEWP48S 100x100x2400mm Square TopWP48P 100x100x2400mm Pyramid Top


Double Gate Fitting Set24” Hook & BandCODE FITSEGFS/BLACK DR91-DR95EGFS/GALV DR91-DR95

Single Gate Fitting Set18” Hook & BandCODE FITSSGFS/BLACK DR70-DR74SGFS/GALV DR70-DR74

Hampton Single Garden GateCODE ACTUAL SIZE GATE HEIGHTHA01 750mm (29.5” ) 1200mm (47”)HA03 900mm (35.5” ) 1200mm (47”)HA05 1050mm (41.3” ) 1200mm (47”)

Hampton Single - Timber PostsCODE SIZEWP46S 100 x 100 x 1650mm Flat TopWP46P 100 x 100 x 1650mm Pyramid Top

Concrete-in or fix to wall

HAMPTON SPECIFICATIONSGates and posts made from Europeanmanaged forest softwoodBracing 70x70mmTongue and groove 95x14mmSteel infill bars 12mm diameterTreated with a general-purpose preserverwhich gives protection against decay, mouldand blue-staining fungi, should still have finalfinish applied.BIC has a painting service, call for a quotationto have your gate painted.




Hampton Low Double Garden GateCODE ACTUAL SIZE GATE HEIGHTHAD30 2400mm (94.5” ) 1200mm (47”)HAD31 2700mm (106.3”) 1200mm (47”)HAD32 3000mm (118”) 1200mm (47”)HAD33 3300mm (129”) 1200mm (47”)HAD34 3600mm (141.7”) 1200mm (47”)

Hampton Double - Pyramid Top Timber PostsCODE SIZEWP46P 100 x 100 x 1650mm

Concrete-in or fix to wall

Single BackSingle Front

Double Gate Fitting Set24” Hook & BandCODE FITSEGFS/BLACK HAD30-HAD34EGFS/GALV HAD30-HAD34

Hampton Wooden Gates

Single

Low Double

Low Double Back


Single Gate Fitting Set18” Hook & BandCODE FITSSGFS/BLACK HA01-HA04SGFS/GALV HA01-HA04

HAMPTON SPECIFICATIONSGates and posts made from Europeanmanaged forest softwoodBracing 70x70mmTongue and groove 95x14mmSteel infill bars 12mm diameterTreated with a general-purpose preserverwhich gives protection against decay, mouldand blue-staining fungi, should still have finalfinish applied.BIC has a painting service, call for a quotationto have your gate painted.

Bretton Sliding BoltCODE FITSBSB All gates


Double Gate Fitting Set24” Hook & BandCODE FITSEGFS/BLACK HATD40-HATD44EGFS/GALV HATD40-HATD44

Hampton Wooden Gates

Tall Single

Hampton Tall Single Garden GateCODE ACTUAL SIZE GATE HEIGHTHAT10 750mm (29.5” ) 1800mm (71”)HAT12 900mm (35.5” ) 1800mm (71”)HAT14 1050mm (41.3”) 1800mm (71”)

Hampton Timber PostCODE SIZE TYPEWP48S 100x100x2400mm Square TopWP48P 100x100x2400mm Pyramid Top

Single Back

Tall DoubleHampton Tall Double Garden GateCODE ACTUAL SIZE GATE HEIGHTHATD40 2400mm (94.5” ) 1800mm (71”)HATD41 2700mm (106.3”) 1800mm (71”)HATD42 3000mm (118”) 1800mm (71”)HATD43 3300mm (129”) 1800mm (71”)HATD44 3600mm (141.7”) 1800mm (71”)

Hampton Tall Double - Pyramid Top Timber PostsCODE SIZE FITSWP48P 100x100x2400mm HATD40-HATD42WP68P 150x150x2400mm HATD40-HATD44



Single Gate Fitting Set18” Hook & BandCODE FITSSGFS/BLACK HAT10-HAT14SGFS/GALV HAT10-HAT14

Wood Burning Stoves and Fire Baskets


Small Fire Basket CODE XPA006Heat resistant matt black coatedSolid steel frame2013 Guide RRP £80.00 + vatBase Tray Size 435x435x30mmOverall height 630mmTop opening 345mm diameterBase 160mm diameter

Large Fire Basket CODE XPA005Heat resistant matt black coatedSolid steel frame2013 Guide RRP £110.00 + vatBase Tray Size 435x435x30mmOverall height 775mmTop opening 475mm diameterBase 240mm diameter

Built-In Wood Burning StoveHeat resistant matt black coated solid steelIncludes:�Base unit�Surround frame�Glass Door

CODE JET18BiHeight 570mm (22.5”)Width 490mm (19.25”)Outset from wall 38mm (1.5”)Output 4.9KW

Free-Standing Wood Burning StovesHeat resistant matt black coated solid steelIncludes:�Base unit�Glass Door

CODE JET18i JET60iHeight 880mm (34.5”) 880mm (34.5”)Width 600mm (23.5”) 775mm (30.5”)Depth 390mm (15.25”) 390mm (15.25”)Output 4.9KW 7.5KW

New for 2013/14, popularity is still under review.All fireplace items are imported, thus we cannot guarantee that there will be stock held at all times.Please contact our Helpline for pricing information and to check for stock availability.

Jet Fire Basket CODE JET01Heat resistant matt black coatedSolid steel frame2013 Guide RRP £100.00 + vatBase Tray Size 450x450mmOverall height 455mmTop opening 455x455mmBase 440x440mm

Fire Baskets are ideal for outdoor warmth and enjoyment.The large capacity will hold sufficient logs for a fire that will burn for a long time.They are also ideal to store logs indoors alongside your wood burning stove.

Need more brochures?Call Burbage Iron Craft Helpline on 01543-438217Following brochures available free of charge� Trade Colour Brochure� Trade Price List� Retail Colour brochure� Recommended Retail Price List

[email protected]: 01543 438217Fax:01543 506237

Trade Suppliers - Need a Display Stand?Call Burbage Iron Craft Helpline on 01543-438217We can build your design of display stand free ofcharge (within reason), all you pay for is the gatesand cost of any Point-of-Sale required.It is recommended that gate display stands ormerchandisers are positioned under roof cover toprevent rusting of primed only product.

www.burbageironcraft.co.ukTel: 01543 438217

Burbage Iron Craft LtdRETAIL BROCHURE

METAL & WOODENGATES, FENCING & RAILINGS

TB 2

013

V2

ORDERS MUST BE PLACED VIA THETRADE SUPPLIER THAT PROVIDED

YOU WITH THIS BOOKLET,RETAIL CUSTOMERS CANNOT

PLACE ORDERS DIRECTLY WITHBURBAGE IRON CRAFT LTD.

Documents

Burbage Iron Craft Ltd RETAIL · PDF fileBurbage Iron Craft Ltd RETAIL BROCHURE METAL & WOODEN GATES, ... All metal gates, fence and railing showing this logo are primed in black and