1

Bunny Hop Spring Table Runner

Designed by Cindy Kratzer

of Gray Barn Designs

(www.graybarndesigns.com)

Copyright Gray Barn Designs 2018. Unauthorized use and/or duplication of this material without express and written permis-

sion from Gray Barn Designs is strictly prohibited. Excerpts and links may be used provided that clear credit is given to Gray

Barn Designs with appropriate and specific direction to the original content.

Hop to it and make

this spring table

runner in one day!

This is an easy,

beginner friendly

pattern that can be

used for any

themed fabric.

Materials Needed

1/3 Yard of green tone on tone print

1 Fat Quarter of bunny/egg spring print

1 Fat Eighth of blue bunny foot print

1 Fat Eighth of yellow bunny foot print

1 Fat Eighth of pink bunny foot print

White scraps from your stash

Coordinating backing print 35 inches wide x 19 inches tall

Quilt batting 35 inches wide x 19 inches tall

Completed Size:

31 inches wide x 15 inches tall

2

Bunny Hop Spring Table Runner

Gray Barn Designs

Copyright Gray Barn Designs 2018. Unauthorized use and/or duplication of this material without express and written permis-

sion from Gray Barn Designs is strictly prohibited. Excerpts and links may be used provided that clear credit is given to Gray

Barn Designs with appropriate and specific direction to the original content.

Cutting Instructions

Green Tone on Tone Print

(32) 1.5” x 2.5” rectangles (flying geese)

(2) 1.5”x 13” strips (left/right border)

(2) 1.5” x 25” strips (top/bottom border)

(3) 2.25”x width of fabric strips (binding)

Bunny Print

(1) 10.75” x 21.25” rectangle (bunny/egg center)

White Scraps

(64) 1.5” x 1.5” squares (flying geese)

(4) 1” x 3.5” white rectangles (left & right outer border)

Blue Bunny Foot Print

(2) 3.5” x 5” rectangles (left & right outer border)

Yellow Bunny Foot Print

(2) 3.5” x 5” rectangles (left & right outer border)

Pink Bunny Foot Print

(2) 3.5” x 5” rectangles (left & right outer border)

Sewing Instructions:

Step 1. Choose one 1.5” x 1.5” white square and place it right side down on your work surface.

Using a thin pencil, draw a diagonal line from corner to corner on the wrong side of the square.

Step 2. Place one 1.5” x 1.5: white square (created in Step 1) right side down on top of a

1.5” x 2.5” green tone on tone rectangle. Sew from corner to corner along the diagonal line

as detailed in the diagram at right.

Step 3. Use a ruler to mark off the quarter inch seam

allowance, trim and press the seam toward the white

fabric as detailed in the diagram at right.

Quilting Math

1/4 inch = .25 inch

1/2 inch = .5 inch

3/4 inch = .75 inch

“ is the symbol for inch

Gray Barn Design Notes

All seams are 1/4 inch , unless otherwise

noted in instructions

Assume width of fabric = 44 inches

Press seams as indicated

Sew seams with right sides together

3

Gray Barn Designs

Copyright Gray Barn Designs 2018. Unauthorized use and/or duplication of this material without express and written permis-

sion from Gray Barn Designs is strictly prohibited. Excerpts and links may be used provided that clear credit is given to Gray

Barn Designs with appropriate and specific direction to the original content.

Sewing Instructions (cont’d):

Step 4. Repeat steps 1, 2 and 3 using one 1.5” x 1.5” white square for the right side of the rectangle as detailed in the

diagram below.

This is a flying geese unit. Make a total of 32 flying geese units.

Step 5. Take 5 flying geese units and lay them out as detailed in the diagram below. Sew the 5 flying geese units

together and press seams open.

Make a total of two strips with 5 flying geese units in each strip.

Step 6. Take 11 flying geese units and lay them out as detailed in the diagram below. Sew the 11 flying geese units

together and press seams open.

Make a total of two strips with 11 flying geese units in each strip.

Bunny Hop Spring Table Runner

Special Note

As detailed in the diagram at right, the

white squares on each flying geese unit

will overlap by 1/4 inch to provide for a

1/4 inch seam allowance.

4

Gray Barn Designs

Copyright Gray Barn Designs 2018. Unauthorized use and/or duplication of this material without express and written permis-

sion from Gray Barn Designs is strictly prohibited. Excerpts and links may be used provided that clear credit is given to Gray

Barn Designs with appropriate and specific direction to the original content.

Sewing Instructions: cont’d

Step 7. Lay out the bunny/egg panel and the flying geese strips as detailed in the diagram below. Sew the

left strip and the right strips to the panel and press seams toward the bunny/egg print. Next, sew the top and

the bottom strips to the bunny/egg panel and press seams toward the bunny egg print.

Step 8. Lay out the green border strips as detailed below. Sew the left strip and the right strip to the flying

geese units and press seams toward the green strips. Next, sew the top and the bottom strips to the flying

geese units and press seams toward the green strips.

Bunny Hop Spring Table Runner

Special Note

The rows of flying geese

will stretch just a bit. Be

sure to use a lot of pins to

attach the flying geese

rows to the bunny/egg

panel before you sew

them together.

5

Gray Barn Designs

Copyright Gray Barn Designs 2018. Unauthorized use and/or duplication of this material without express and written permis-

sion from Gray Barn Designs is strictly prohibited. Excerpts and links may be used provided that clear credit is given to Gray

Barn Designs with appropriate and specific direction to the original content.

Sewing Instructions: cont’d

Step 9. Lay out the 3.5” x 5” blue, yellow and pink bunny foot print rectangles and the white 1.5” x 3.5”

rectangles as detailed below. Sew all the rectangles together and press seams toward the blue, yellow and pink

rectangles.

Step 10. Sew the units created in Step 9 to the left and to the right of the panel as detailed in the diagram

below.

Step 11: Layer the backing fabric, batting and pieced top. Quilt using your favorite technique.

Step 12: Sew the 2.25 inch binding strips together and attach to the Bunny Hop Spring Table Runner using your

favorite binding technique.

Step 13: Celebrate Spring!

Like free quilt patterns?

Follow us at www.graybarndesigns.com

Bunny Hop Spring Table Runner