BunkerMat(M118-07-08)

Embed Size (px)

Citation preview

  • 7/29/2019 BunkerMat(M118-07-08)

    1/2

    gol courses

    BunkerMat

    The 3 dimensional sand retention

    and drainage matting

  • 7/29/2019 BunkerMat(M118-07-08)

    2/2

    BunkerMat

    IMPORTANT NOTICE

    The inormation contained in this brochure is general in nature. In particular the content o this brochure does not take account o speciic conditions that may be present at your site. Site conditions may alter the perormance and

    longevity o the product and in extreme cases may make the product wholly unsuitable. Any data or speciications contained in this brochure are average values obtained in our laboratory. Actual dimensions and perormance

    may vary. I your project requires accuracy to a certain speciied tolerance level you must advise us beore ordering the product rom us. We can then advise whether the product will meet the required tolerances. Where provided,

    installation instructions cover installation o product in site conditions that are conducive to its use and optimum per ormance. I you have any doubts as to the installation instructions or their application to your site, please

    contact us or clariication beore commencing installation. In all cases we recommend that advice be obtained rom a qualiied consulting engineer beore proceeding with installation. Copyright held by Geoabrics Australasia

    Pty Ltd. All rights are reserved and no part o this publication may be copied without prior permission.

    www.geoabrics.com.au

    Installation Data

    The bunker sand is trapped within the structure o the fbres which allows the sand to be held on a steeper incline.

    BunkerMat is also a fltration barrier which limits the migration o fnes rom the subsoils rising to the base o thebunker and contaminating the sand, making them unplayable. As a result, there is less need or replacement sand.

    M118 - 07/08

    BunkerMat Specifcation

    Colours Lime White - Beige - Tan

    Fibres 1st quality polypropylene fbres

    Weight 750gsm

    Thickness 10mm

    Roll Size 2m x 25m, 4m x 25m

    Washout Prevention Excellent

    ContaminationPrevention

    Excellent

    Tensile strength 500kg / m

    CBR burst strengthElongation 1200 N / 122kg50%

    Installation Diagram

    Steep Face Pinning Diagram

    400mm

    400mm200mm min

    Pins

    MELBOURNE SYDNEY NEWCASTLE PERTH ADELAIDE HOBART(03) 8586 9111 (02) 9821 3277 (02) 4950 5845 (08) 9309 4388 (08) 8177 2055 (03) 6273 0511

    Fax: (03) 8586 9186 Fax: (02) 9821 3670 Fax: (02) 4950 5895 Fax: (08) 9309 4389 Fax: (08) 8177 2044 Fax: (03) 6273 0686

    BRISBANE TOWNSVILLE BUNDABERG GOLD COAST DARWIN(07) 3279 1588 (07) 4774 8222 (07) 4155 9968 (07) 5563 2131 (08) 8984 1600

    Fax: (07) 3279 1589 Fax: (07) 4774 8655 Fax: (07) 4155 9968 Fax: (07) 5563 3727 Fax: (08) 8984 1614