www.evinrude.com

Material: Aluminum Engine Type: Inline 3 Cyl Material: Stainless SteelLength: 18' 5" Horsepower: 90HP @ 5000 RPM Diameter/Pitch: 13 7/8" x 17"Beam: 86" Displacement: 79.1 Cu In No. of Blades: 3Weight w/o Engine: 1100 LBS Dry Induction: ETEC DFI Part Number: 763930Maximum HP: 115 HP Operating Range: 4500-5500 RPMFuel Capacity: Weight: 320 LBS Dry Weight Hole Position: #2Transom Height: 20" Shaft Gear Ratio: 2.00:1 Jack Plate: N/ASteering: Cable AV Mounting: N/A

RPM MPH GPH RANGE Water Conditions: Calm700 3.1 0.10 549 Wind Velocity: 5 MPH

1000 4.3 0.20 387 Air Temperature: 86° F1500 6.0 0.80 134 Fuel Load: Full2000 7.6 1.70 80 Weight: 2 Men, Fuel, Safety/Test Gear2500 14.5 2.40 1083000 20.0 3.10 1163500 25.6 4.10 1124000 30.6 5.35 1034500 34.6 6.40 975000 38.9 7.70 915200 41.3 7.80 95

6.0

7.44.5

TEST CONDITIONS

BRP Viper

PERFORMANCE DATA

MOUNTING HEIGHT

PROPELLER

Range (Miles) Based On 90% Fuel Capacity

2014 Alumacraft Pro 185

20 Gallons

30.5

BOAT2014 Alumacraft Pro 185

ENGINEEvinrude® 90 HP ETEC®

MPG

21.5

Acceleration: 3.92 seconds to plane

Trolling motor, 2 Batteries

Top Speed: 41.3 MPHPERFORMANCE SUMMARY

1-877-314-7756

Alumacraft Boat Co.315 W. Saint Julien St.

St Peter, MN 56082

www.alumacraft.com

10101 Science DriveSturtevant, WI 53177

Bombardier Recreational Products Inc.

5.4

6.5

Best Fuel Efficiency: 6.5 MPG with a range of 116 Miles @ 20.0 MPH

5.05.3

5.76.2

DATE OF TEST: 6/18/13ENGINE: E90DPLAAABULLETIN #: PE1088

NOTE: Data may vary due to changes in weather and water conditions, elevation, load and boat bottom conditions, boat, engine and propeller options and conditions, and operator ability. Speed and fuel were calculated by

NMEA 2000 I-Command. Test performed and certified by BRP OEM Applications Engineering.© 2013 BRP US Inc. All rights reserved.

™ ® and the BPR logo are Trademarks and Registered Trademarks of Bombardier Recreational Products Inc. or its affiliates.

BOAT TYPE: Aluminum