Bulk Hose Reference Guide - REIS Equipreisequip.com/pdf/parkerhydraulichoses.pdfBulk Hose Reference Guide General properties of each hose offering are displayed throughout the attached

SOLUTIONSPARTS &SERVICE

OriginalPartsCNH

OR

IGIN

AL P

AR

TS

FLE

XIB

LE

HO

SE

S A

ND

CR

IMP

ED

FIT

TIN

GS

The CNH “Hose & Fittings - Parker Hannifin” program supports a wide variety of hoses including braided, spiral, multi-purpose, refrigerant and more. The entire offering has been tested by Parker Hannifin and approved to meet and exceed global standards. The CNH hose offering ranges in size from 1/4" (size -4) to 2" (size 32) and is compatible with crimp and field-attachable style fittings.

General performance characteristics of CNH bulk hoseSpecial abrasion resistant coversSpecial designs to withstand suction forcesSpecial designs for refrigeration serviceLow pressure designsMedium pressure designsHigh pressure designs

Bulk Hose Reference Guide

General properties of each hose offering are displayed throughout the attached pages. Additional information is available by calling the Parker Hannifin Technical Information Line.

Parker Hannifin Parflex Division- HFS Firescreen®, Medium Pressure- HR1C Farmex®, Medium Pressure- D6 3000 psi Constant Pressure- R6 Abrasion King®, 3000 psi Constant Pressure With Abrasion Resistant Cover- HFS2 Firescreen II®, Medium Pressure- HR2C Farmex II®, Medium Pressure- HTB Eliminator®, High Pressure* For technical question on Parflex Division products call (330) 298-4066.

Parker Hannifin Hose Products Division**- 801 Multipurpose, Low Pressure- 811HT High Temperature Suction/Return, Low Pressure- B7 Non impulse; Low Pressure- 285 Refrigerant, Low Pressure- 451ST 3000 psi Constant Pressure With “Super Tough” Cover- 422 Hydraulic, Medium Pressure- 482TC Hydraulic With “Tough Cover”, Medium Pressure- BXX E-Z Flex, Medium Pressure- 431 Hydraulic, Compact, Medium Pressure- 301/302 Hydraulic World Wide, Medium Pressure- 471TC Hydraulic With “Tough Cover”, Medium Pressure- 471ST Hydraulic With “Super Tough” Cover, Medium Pressure- 472TC Hydraulic With “Tough Cover”, Medium Pressure- 351TC 4000 psi Constant Pressure with “Tough Cover”- 351ST 4000 psi Constant Pressure with “Super Tough” Cover- 721TC Hydraulic With “Tough Cover”, High Pressure- 772TC Hydraulic With “Tough Cover”, High Pressure- 781 Hydraulic, High Pressure- 782TC Hydraulic With “Tough Cover”, High Pressure- 701 Hydraulic, High Pressure- 791TC Hydraulic With “Tough Cover”, High Pressure- 792TC Hydraulic With “Tough Cover”, High Pressure**For technical assistance from Hose Products Division call (440) 943-5700

SOLUTIONSPARTS &SERVICE

OriginalPartsCNH

OR

IGIN

AL P

AR

TS

FLE

XIB

LE

HO

SE

S A

ND

CR

IMP

ED

FIT

TIN

GS

Bulk Hose Reference Guide

Parker Hose NomenclatureExample: 451TC-8 Hose Type

451TC-8 Indicates the special feature of the hose (in this case, ‘Tough Cover’)

451TC-8 Hose inside diameter dash size (in this case, 8/16" or 1/2")

How to properly combine approved combinations of Hose and Fittings:

Parker Hannifin supports an on-line database of approved combinations of crimpers, hose, ends, and dies. Only hose and fitting combinations which are specifically approved by the hose manufacturer should be assembled. CrimpSource is your in-house expert for the crimping of all Parker Hannifin hose and ends. The below instructions will guide you through the web site.

1) Navigate your web browser to http://www.parker.com/crimpsource.2) Use the drop-down menu, in the center of the page, to select the specific crimper being used (click on the

down arrow in the center of the screen)3) Click on “Crimp Spec” (See gold boxes on the left side of the page)4) Use the drop-down menu to select the specific hose style to be crimped5) Use the drop-down menu to select the specific fitting series being used6) View results**

**Note that in some cases, to view the Parker Hannifin die part number in CrimpSource, you must position the curser over the die reference (3rd column on CrimpSource output). Once the curser is in position, the Parker die part number will appear on your screen.

Results from the ISO 6945 metal-to-hose abrasion test show that Tough Cover and Super Tough Cover hoses offer significantly greater abrasion resistance than standard rubber cover hose.

Braided vs. Spiral Hose

Hydraulic hose can be categorized by construction style, of which there are two main types: braided and spiral. The majority of "low pressure hoses" designs have a textile braided construction. They're commonly used to transmit petroleum-based fluids, diesel fuel, hot lubricating oil, air, ethylene glycol anti-freeze, and water. "Medium pressure hose" designs typically feature one and two-wire braided construction. These hoses are frequently found on construction equipment, heavy-duty trucks, and fleet vehicle applications. In general, braided hose is selected for its flexibility. A "high pressure" spiral reinforced design is able to pack more reinforcement into a hose than a braid design hose. Spiral hose is typically selected for its ability to withstand high working pressure and extremely high impulse pressure. Spiral hoses are commonly used in support of hydrostatic drives.

http://www.parker.com/dayco/CSOnline/CrimpSource.asp

OriginalPartsCNH

3

PARTS AND SERVICE SOLUTIONSORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Visual Index Bulk Hose Reference Guide

Multi-Purpose

One Textile BraidReinforcement

801 PG-4 B7 PG-4

One Textile BraidReinforcement

Specialty

811HT PG-5

Two or Four SpiralFabric Reinforcement

285 PG-5

One Fiber BraidReinforcement

MediumPressure

HFS PG-6

One Wire BraidReinforcement

HR1C PG-6


D6 PG-7

One or Two Wire BraidReinforcement

R6 PG-7


451TC PG-8


422 PG-8


482TC PG-9


HFS2 PG-9


HR2C PG-10


BXX PG-10

Two Wire BraidReinforcement

431 PG-11


301/302 PG-11


HighPressure

471TC PG-12


471ST PG-13


472TC PG-13


351TC PG-14


351ST PG-14



HTB PG-15 721TC PG-16

Four Spiral WireReinforcement

772TC PG-17


781 PG-17

Four & Six Spiral WireReinforcement

782TC PG-18


701 PG-18



791TC PG-19


792TC PG-19


OriginalPartsCNH

GO TO INDEX

4

MULTIPURPOSE HOSE

STYLE 801

STYLE B7

Push On

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

MinimumBend Radius Fitting

Seriesinch mm inch mm psi MPa inch mmP-801-4-BLK-RL 801-4-BLK-500’ 1/4 6.3 .50 12.7 250 1.7 2-1/2 65 82P-801-6-BLK-RL 801-6-BLK-370’ 3/8 10 .63 15.9 250 1.7 3 75 82P-801-8-BLK-RL 801-8-BLK-240’ 1/2 12.5 .78 19.8 250 1.7 5 125 82P-801-10-BLK-RL 801-10-BLK-250’ 5/8 16 .91 23.0 250 1.7 6 150 82P-801-12-BLK-RL 801-12-BLK-200’ 3/4 19 1.03 26.2 250 1.7 7 180 82P-801-16-BLK-RL 801-16-BLK-150’ 1 25 1.28 32.6 175 1.2 10 250 82

Push On

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmZJM195 B704-50’ 1/4 6.3 .50 12.7 375 2.58 1500 10.3 3.0 76.2 HY*P-B704-RL B704-650’ 1/4 6.3 .50 12.7 375 2.58 1500 10.3 3.0 76.2 HY*ZJM196 B706-50’ 3/8 9.5 .62 15.7 300 2.07 1200 8.2 3.0 76.2 HY*ZJM197 B708-50’ 1/2 12.7 .75 19 300 2.07 1200 8.2 5.0 127 HY*ZJM198 B710-50’ 5/8 15.8 .91 23 300 2.07 1200 8.2 6.0 152 HY*ZJM199 B712-50’ 3/4 19 1.03 26.2 300 2.07 1200 8.2 7 180 HY** Recommended for adjustable crimpers only

http://www.parker.com/dayco/csonline/crimpsource.asp



OriginalPartsCNH

GO TO INDEX

5

SPECIALTY HOSE

STYLE 811HT SAE 100R4 - SUCTION AND RETURN

STYLE 285

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-811HT-12-BX 811HT-12-50’ 3/4 19.0 1.18 30.0 100 0,7 400 8.3 2-1/2 64 88P-811HT-16-BX 811HT-16-50’ 1 25.4 1.50 38.0 70 0,5 280 7.0 3 76 88P-811HT-20-BX 811HT-20-50’ 1-1/4 31.8 1.77 45.0 50 0,3 200 5.5 4 102 88P-811HT-24-BX 811HT-24-50’ 1-1/2 38.1 2.05 52.0 50 0,3 200 4.1 5 127 88

Hose, Fittings, Crimper and Die compatibility must beconfirmed through CrimpSource -


SAE J2064 Type CClass 1

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-285-4-BX 285-4-100' 3/16 5.1 .49 11.7 500 3.4 2500 13.8 1 25 26P-285-6-BX 285-6-100' 5/16 8.1 .62 15.7 500 3.4 2500 13.8 1 1/2 38 26P-285-8-BX 285-8-100' 13/32 10.7 .74 18.8 500 3.4 2500 13.8 2 51 26P-285-10-BX 285-10-100' 1/2 13 .83 21.1 500 3.4 2500 13.8 2 1/2 64 26




OriginalPartsCNH

GO TO INDEX

6

MEDIUM PRESSURE HOSE

STYLE HFS - FIRE SCREEN®

STYLE HR1C - FARMEX®

Exceeds SAE 100R1, Type AT

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmB91111 HFS04-250’ 1/4 6.3 0.50 12.7 3000 20.7 12000 82.7 2.0 50.8 HY, 43B91112 HFS06-250’ 3/8 9.5 0.66 16.7 2500 17.2 10000 68.9 2.5 63.5 HY, 43B91113 HFS08-250’ 1/2 12.7 0.77 19.5 2500 17.2 10000 68.9 3.5 88.9 HY, 43

Exceeds SAE 100R1, Type AT

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmB90898 HR1C04-250’ 1/4 6.3 0.50 12.7 3000 20.7 12000 84.7 2.0 50.8 HY, 43B90899 HR1C06-250’ 3/8 9.5 0.66 16.7 2500 17.2 10000 68.9 2.5 63.5 HY, 43B90900 HR1C08-250’ 1/2 12.7 0.77 19.5 2500 17.2 10000 68.9 3.5 88.9 HY, 43




OriginalPartsCNH

GO TO INDEX

7

MEDIUM PRESSURE HOSE - (CONTINUED)

STYLE D6 - HYBRID HOSE

STYLE R6 - ABRASION KING NO SKIVE

Exceeds SAE 100R17

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmB91577 D604-250’ 1/4 6.3 0.50 12.7 3000 20.7 12000 82.7 2.0 50.8 HY, 43*B91578 D606-250’ 3/8 9.5 0.66 16.7 3000 20.7 12000 82.7 2.5 63.5 HY, 43*B91579 D608-250’ 1/2 12.7 0.80 20 3000 20.7 12000 82.7 3.5 88.9 HY, 43*B93613 D610-250’ 5/8 15.8 1.00 25.4 3000 20.7 12000 82.7 4.0 101.6 HY, 43*B93614 D612-250’ 3/4 19 1.18 29.9 3000 20.7 12000 82.7 4.8 121.9 HY, 43*B93615 D616-250’ 1 25 1.48 37.5 3000 20.7 12000 82.7 6.0 152.4 HY, 43** Recommended for Parkrimp crimpers only (non-adjustable crimpers)

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-R6-4-RL R6-04-500’ 1/4 6 .51 13 3000 20.7 12000 20.7 2.0 51 HYP-R6-6-RL R6-06-500’ 3/8 10 .69 17 3000 20.7 12000 20.7 2.5 64 HYP-R6-8-RL R6-08-500’ 1/2 13 .82 21 3000 20.7 12000 20.7 3.5 89 HYP-R6-10-RL R6-10-250’ 5/8 16 1.07 27 3000 20.7 12000 20.7 4.0 102 HYP-R6-12-RL R6-12-250’ 3/4 19 1.23 31 3000 20.7 12000 20.7 4.8 122 HYP-R6-16-RL R6-16-250’ 1 25 1.53 39 3000 20.7 12000 20.7 6.0 152 43** Recommended for Parkrimp crimpers only (non-adjustable crimpers)

Hose, Fittings, Crimper and Die compatibility must beconfirmed through CrimpSource -


Exceeds SAE 100R17




OriginalPartsCNH

GO TO INDEX

8


STYLE 451TC - BRAIDED

STYLE 422 - NO SKIVE

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-451TC-4-RL 451TC-4-450’ 1/4 6.3 0.52 13 3000 21.0 12000 84.0 2 50 43P-451TC-6-BX 451TC-6-50’ 3/8 10 0.68 17 3000 21.0 12000 84.0 2-1/2 65 43P-451TC-6-RL 451TC-6-350’ 3/8 10 0.68 17 3000 21.0 12000 84.0 2-1/2 65 43P-451TC-8-RL 451TC-8-400’ 1/2 12.5 0.80 20 3000 21.0 12000 84.0 3-1/2 90 43P-451TC-10-RL 451TC-10-265’ 5/8 16 0.94 24 3000 21.0 12000 84.0 4 100 43P-451TC-12-RL 451TC-12-230’ 3/4 19 1.10 28 3000 21.0 12000 84.0 4-3/4 120 43P-451TC-16-RL 451TC-16-125’ 1 25 1.40 35 3000 21.0 12000 84.0 6 150 43

SAE 100R1, Type AT

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-422-4-BX 422-4-50’ 1/4 6.3 0.53 13 3250 25.0 13000 90.0 4.0 100 43P-422-4-RL 422-4-450’ 1/4 6.3 0.53 13 3250 25.0 13000 90.0 4.0 100 43P-422-6-BX 422-6-50’ 3/8 10 0.68 17 2600 18.0 10400 72.0 5.0 130 43P-422-6-RL 422-6-350’ 3/8 10 0.68 17 2600 18.0 10400 72.0 5.0 130 43P-422-8-BX 422-8-50’ 1/2 12.5 0.81 21 2325 16.0 9300 64.0 7.0 180 43P-422-8-RL 422-8-400’ 1/2 12.5 0.81 21 2325 16.0 9300 64.0 7.0 180 43P-422-10-BX 422-10-50’ 5/8 16 0.94 24 1875 13.0 7500 52.0 8.0 200 43P-422-10-RL 422-10-275’ 5/8 16 0.94 24 1875 13.0 7500 52.0 8.0 200 43P-422-12-BX 422-12-50’ 3/4 19 1.09 28 1525 10.5 6100 42.0 9.5 240 43P-422-12-RL 4222-12-230’ 3/4 19 1.09 28 1525 10.5 6100 42.0 9.5 240 43P-422-16-BX 422-16-50’ 1 25 1.41 36 1275 8.8 5100 35.0 12.0 300 43P-422-16-RL 422-16-125’ 1 25 1.41 36 1275 8.8 5100 35.0 12.0 300 43




OriginalPartsCNH

GO TO INDEX

9


STYLE 482TC - TOUGH COVER - BRAIDED

STYLE HFS2 - FIRESCREEN II®

No Skive

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-482TC-4-BX 482TC-4-50’ 1/4 6.3 0.525 13 3250 22.7 13000 90.8 2 50 43P-482TC-4-RL 482TC-4-450’ 1/4 6.3 0.525 13 3250 22.7 13000 90.8 2 50 43P-482TC-6-BX 482TC-6-50’ 3/8 10.0 0.690 17 3000 21.0 12000 84.0 2-1/2 65 43P-482TC-6-RL 482TC-6-350’ 3/8 10.0 0.690 17 3000 21.0 12000 84.0 2-1/2 65 43P-482TC-8-BX 482TC-8-50’ 1/2 12.5 0.820 21 2500 17.5 10000 70.0 3-1/2 90 43P-482TC-8-RL 482TC-8-400’ 1/2 12.5 0.820 21 2500 17.5 10000 70.0 3-1/2 90 43P-482TC-10-BX 482TC-10-50’ 5/8 16 0.94 24 2000 14.0 8000 56.0 4 100 43P-482TC-10-RL 482TC-10-275’ 5/8 16 0.94 24 2000 14.0 8000 56.0 4 100 43P-482TC-12-BX 482TC-12-50’ 3/4 19 1.090 28 1750 12.2 7000 48.8 4-3/4 120 43P-482TC-12-RL 482TC-12-230’ 3/4 19 1.090 28 1750 12.2 7000 48.8 4-3/4 120 43P-482TC-16-BX 482TC-16-50’ 1 25 1.410 36 1275 8.8 5100 35.0 6 150 43P-482TC-16-RL 482TC-16-125’ 1 25 1.410 36 1275 8.8 5100 35.0 6 150 43

SAE 100 R16

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmB91114 HFS204-250’ 1/4 6.3 0.56 14.2 5000 34.5 20000 137.8 2.0 50.8 HY, 43B91115 HFS206-250’ 3/8 9.5 0.66 16.7 4000 27.6 16000 110.3 2.5 63.5 HY, 43B91116 HFS208-250’ 1/2 12.7 0.80 20 3500 24.1 14000 96.5 3.5 88.9 HY, 43B93310 HFS210-55’ 5/8 15.8 0.95 24.1 2750 19.0 11000 75.8 4.0 101.6 HY, 43ZJM417 HFS210-250’ 5/8 15.8 0.95 24.1 2750 19.0 11000 75.8 4.0 101.6 HY, 43B93311 HFS212-55’ 3/4 19 1.08 27.4 2250 15.5 9000 62.0 4.8 121.9 HY, 43B91117 HFS212-250’ 3/4 19 1.08 27.4 2250 15.5 9000 62.0 4.8 121.9 HY, 43B93312 HFS216-55’ 1 25 1.43 36.3 2000 13.8 8000 55.2 6.0 152.4 HY, 43ZJM178 HFS216-250’ 1 25 1.43 36.3 2000 13.8 8000 55.2 6.0 152.4 HY, 43




OriginalPartsCNH

GO TO INDEX

10


STYLE HR2C - FARMEX II®

STYLE BXX E-Z FLEX®

SAE 100R2, Type AT

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmB90976 HR2C04-250’ 1/4 6.3 0.56 14.2 5000 34.5 20000 137.8 2.0 50.8 HY, 43B94031 HR2C04-50’ 1/4 6.3 0.56 14.2 5000 34.5 20000 137.8 2.0 50.8 HY, 43B90977 HR2C06-250’ 3/8 9.5 0.66 16.7 4000 27.6 16000 110.3 2.5 63.4 HY, 43B90978 HR2C08-250’ 1/2 12.7 0.80 20.3 3500 24.1 14000 96.5 3.5 88.9 HY, 43B93313 HR2C10-50’ 5/8 15.8 0.95 24.1 2750 19.0 11000 75.8 4.0 101.6 HY, 43ZJM179 HR2C10-250’ 5/8 15.8 0.95 24.1 2750 19.0 11000 74.8 4.0 101.6 HY, 43B93314 HR2C12-50’ 3/4 19 1.08 27.4 2250 15.5 9000 62.0 4.8 121.9 HY, 43B90979 HR2C12-250’ 3/4 19 1.08 27.4 2250 15.5 9000 62.0 4.8 121.9 HY, 43B93315 HR2C16-50’ 1 25 1.43 36.3 2000 13.8 8000 55.2 6.0 152.4 HY, 43ZJM180 HR2C16-250’ 1 25 1.43 36.3 2000 13.8 8000 55.2 6.0 152.4 HY, 43

SAE 100R2, Type AT

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmB94994 BXX04-350’ 1/4 6.3 0.59 14.9 5000 34.5 20000 137.8 4 101.6 HYB94995 BXX06-350’ 3/8 9.5 0.74 18.8 4000 27.6 16000 110.3 5 127 HYB94996 BXX08-250’ 1/2 12.7 0.87 22.1 3500 24.1 14000 96.5 7 177.8 HYB94997 BXX10-250’ 5/8 15.8 1.00 25.4 2750 19.0 11000 75.8 8 203.2 HYB94998 BXX12-50’ 3/4 19 1.15 29.2 2250 15.5 9000 62.0 9.5 241.3 HYB94999 BXX12-200’ 3/4 19 1.15 29.2 2250 15.5 9000 62.0 9.5 241.3 HYB95000 BXX16-50’ 1 25 1.49 37.8 2000 13.8 8000 55.2 12 304.8 HYB95001 BXX16-250’ 1 25 1.49 37.8 2000 13.8 8000 55.2 12 304.8 HY




OriginalPartsCNH

GO TO INDEX

11



STYLE 301/302 - NO SKIVE

SAE 100R16, Type R16

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-431-4-RL 431-4-450’ 1/4 6.3 0.53 13 5000 34.5 20000 138 2.0 50 43P-431-6-RL 431-6-350’ 3/8 10 0.68 17 4000 27.5 16000 110 2.5 65 43P-431-8-RL 431-8-400’ 1/2 12.5 0.81 21 3500 24 14000 96 3.5 90 43P-431-10-RL 431-10-275’ 5/8 16 0.94 24 2750 19 11000 76 4.0 100 43P-431-12-RL 431-12-230’ 3/4 19 1.09 28 2250 15.5 9000 62 4.75 120 43P-431-16-RL 431-16-125’ 1 25 1.41 36 2000 13.8 8000 55 6.0 150 43

SAE 100R2, Type AT

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-301-4-BX 301-4-50’ 1/4 6.3 0.59 15 5000 34.5 20000 138 4.0 100 43P-301-4-RL 301-4-450’ 1/4 6.3 0.59 15 5000 34.5 20000 138 4.0 100 43P-301-6-BX 301-6-50’ 3/8 10 0.75 19 4000 27.5 16000 110 5.0 130 43P-301-6-RL 301-6-350’ 3/8 10 0.75 19 4000 27.5 16000 110 5.0 130 43P-301-8-BX 301-8-50’ 1/2 12.5 0.88 22 3500 24 14000 96 7.0 180 43P-301-8-RL 301-8-400’ 1/2 12.5 0.88 22 3500 24 14000 96 7.0 180 43P-301-10-BX 301-10-50’ 5/8 16 1.00 25 2750 19 11000 76 8.0 200 43P-301-10-RL 301-10-275’ 5/8 16 1.00 25 2750 19 11000 76 8.0 200 43P-301-12-BX 301-12-50’ 3/4 19 1.16 29 2250 15.5 9000 62 9.5 240 43P-301-12-RL 301-12-230’ 3/4 19 1.16 29 2250 15.5 9000 62 9.5 240 43P-301-16-BX 301-16-50’ 1 25 1.50 38 2000 13.8 8000 55 12.0 300 43P-301-16-RL 301-16-125’ 1 25 1.50 38 2000 13.8 8000 55 12.0 300 43




OriginalPartsCNH

GO TO INDEX

12

HIGH PRESSURE HOSE

STYLE 471TC - TOUGH COVER - BRAIDEDNo Skive

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-471TC-4-BX 471TC-4-50’ 1/4 6.3 .510 13 5800 40 23200 160 2 50 43P-471TC-4-RL 471TC-4-450’ 1/4 6.3 .510 13 5800 40 23200 160 2 50 43P-471TC-6-BX 471TC-6-50’ 3/8 10 0.68 17 5000 35.0 20000 140.0 2-1/2 65 43P-471TC-6-RL 471TC-6-350’ 3/8 10 0.68 17 5000 35.0 20000 140.0 2-1/2 65 43P-471TC-8-BX 471TC-8-50’ 1/2 12.5 .800 20 4250 29.7 17000 119 3-1/2 90 43P-471TC-8-RL 471TC-8-400’ 1/2 12.5 .800 20 4250 29.7 17000 119 3-1/2 90 43P-471TC-10-BX 471TC-10-50’ 5/8 16 0.94 24 3625 25.0 14500 100.0 4 100 43P-471TC-10-RL 471TC-10-275’ 5/8 16 0.94 24 3625 25.0 14500 100.0 4 100 43P-471TC-12-BX 471TC-12-50’ 3/4 19 1.090 28 3125 21.5 12500 86.0 4-3/4 120 43P-471TC-12-RL 471TC-12-230’ 3/4 19 1.090 28 3125 21.5 12500 86.0 4-3/4 120 43P-471TC-16-BX 471TC-16-50’ 1 25 1.40 35 2500 17.5 10000 70.0 6 150 43P-471TC-16-RL 471TC-16-125’ 1 25 1.40 35 2500 17.5 10000 70.0 6 150 43



OriginalPartsCNH

GO TO INDEX

13

HIGH PRESSURE HOSE - (CONTINUED)

STYLE 471ST - SUPER TOUGH COVER - BRAIDED

STYLE 472TC - TOUGH COVER - BRAIDED

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-471ST-4-BX 471ST-4-50’ 1/4 6.3 0.510 13 5800 40.0 23200 160.0 2 50 43P-471ST-4-RL 471ST-4-450’ 1/4 6.3 0.510 13 5800 40.0 23200 160.0 2 50 43P-471ST-6-BX 471ST-6-50’ 3/8 10.0 0.67 17 5000 35.0 20000 140.0 2-1/2 65 43P-471ST-6-RL 471ST-6-350’ 3/8 10.0 0.67 17 5000 35.0 20000 140.0 2-1/2 65 43P-471ST-8-BX 471ST-8-50’ 1/2 12.5 0.80 20 4250 29.7 17000 119.0 3-1/2 90 43P-471ST-8-RL 471ST-8-400’ 1/2 12.5 0.80 20 4250 29.7 17000 119.0 3-1/2 90 43P-471ST-10-BX 471ST-10-50’ 5/8 16 0.94 24 3625 25.0 14500 100.0 4 100 43P-471ST-10-RL 471ST-10-275’ 5/8 16 0.94 24 3625 25.0 14500 100.0 4 100 43P-471ST-12-BX 471ST-12-50’ 3/4 19 1.10 28 3125 21.5 12500 86.0 4-3/4 120 43P-471ST-12-RL 471ST-12-230’ 3/4 19 1.10 28 3125 21.5 12500 86.0 4-3/4 120 43P-471ST-16-BX 471ST-16-50’ 1 25 1.38 35 2500 17.5 10000 70.0 6 150 43P-471ST-16-RL 471ST-16-125’ 1 25 1.38 35 2500 17.5 10000 70.0 6 150 43

No Skive Hose, Fittings, Crimper and Die compatibility must beconfirmed through CrimpSource -


No Skive

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-472TC-20 472TC-20-50’ 1-1/4 31.5 1.79 45 2250 15.7 9000 63 8-1/4 210 43P-472TC-24 472TC-24-50’ 1-1/2 38 2.01 51 1800 12.5 7200 50 10 250 43




OriginalPartsCNH

GO TO INDEX

14


STYLE 351TC - SUPER TOUGH COVER

STYLE 351ST - SUPER TOUGH COVER

No Skive

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-351TC-BX 351TC-4-50’ 1/4 6.3 0.51 13 4000 28 2 50 43P-351TC-4-RL 351TC-4-450’ 1/4 6.3 0.51 13 4000 28 2 50 43P-351TC-6-BX 351TC-6-50’ 3/8 10 0.67 17 4000 28 2-1/2 65 43P-351TC-6-RL 351TC-6-350’ 3/8 10 0.67 17 4000 28 2-1/2 65 43P-351TC-8-BX 351TC-8-50’ 1/2 12.5 0.80 20 4000 28 3-1/2 90 43P-351TC-8-RL 351TC-8-400’ 1/2 12.5 0.80 20 4000 28 3-1/2 90 43P-351TC-10-BX 351TC-10-50’ 5/8 16 0.93 24 4000 28 4 100 43P-351TC-10-RL 351TC-10-275’ 5/8 16 0.93 24 4000 28 4 100 43P-351TC-12-BX 351TC-12-50’ 3/4 19 1.09 28 4000 28 4-3/4 120 43P-351TC-12-RL 351TC-12-230’ 3/4 19 1.09 28 4000 28 4-3/4 120 43

No Skive

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-351ST-4-BX 351ST-4-50’ 1/4 6.3 0.51 13 4000 28 2 50 43P-351ST-4-RL 351ST-4-450’ 1/4 6.3 0.51 13 4000 28 2 50 43P-351ST-6-BX 351ST-6-50’ 3/8 10 0.67 17 4000 28 2-1/2 65 43P-351ST-6-RL 351ST-6-350’ 3/8 10 0.67 17 4000 28 2-1/2 65 43P-351ST-8-BX 351ST-8-50’ 1/2 12.5 0.80 20 4000 28 3-1/2 90 43P-351ST-8-RL 351ST-8-400’ 1/2 12.5 0.80 20 4000 28 3-1/2 90 43P-351ST-10-BX 351ST-10-50’ 5/8 16 0.93 24 4000 28 4 100 43P-351ST-10-RL 351ST-10-275’ 5/8 16 0.93 24 4000 28 4 100 43P-351ST-12-BX 351ST-12-50’ 3/4 19 1.09 28 4000 28 4-3/4 120 43P-351ST-12-RL 351ST-12-230’ 3/4 19 1.09 28 4000 28 4-3/4 120 43




OriginalPartsCNH

GO TO INDEX

15


STYLE HTB - ELIMINATOR®

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmZJM181 HTB04-250’ 1/4 6.3 0.60 15.2 7000 48.2 28000 193.0 4.0 101.6 HY*ZJM182 HTB06-250’ 3/8 9.5 0.74 18.8 5500 37.9 22000 151.6 6.0 152.4 HY*, 43ZJM183 HTB08-250’ 1/2 12.7 0.87 22.1 5000 34.5 20000 137.8 7.0 177.8 HY*, 43B93316 HTB10-50’ 5/8 15.8 1.00 25.4 4000 27.6 16000 110 8.0 203.2 HY*, 43**ZJM434 HTB10-250’ 5/8 15.8 1.00 25.4 4000 27.6 16000 110 8.0 203.2 HY*, 43**B93317 HTB12-50’ 3/4 19 1.15 29.2 4000 27.6 16000 110.3 9.5 241.3 HY*, 43ZJM184 HTB12-250’ 3/4 19 1.15 29.2 4000 27.6 16000 110.3 9.5 241.3 HY*, 43B93318 HTB16-50’ 1 25 1.49 37.8 3500 24.1 14000 96.5 12.0 304.8 HY*, 43ZJM185 HTB16-250’ 1 25 1.49 37.8 3500 24.1 14000 96.5 12.0 304.8 HY*, 43* Recommended for Parkrimp crimpers only (non-adjustable crimpers)

** Recommended for adjustable crimpers only. Hose must be skived when using HY couplings.



OriginalPartsCNH

GO TO INDEX

16


STYLE 721TC - NO SKIVE - BRAIDEDSAE 100R12

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-721TC-6-BX 721TC-6-50’ 3/8 10 0.8 20 4000 28.0 16000 112.0 2.5 62.5 71P-721TC-6-RL 721TC-6-125’ 3/8 10 0.8 20 4000 28.0 16000 112.0 2.5 62.5 71P-721TC-8-BX 721TC-8-50’ 1/2 12.5 0.94 24 4000 28.0 16000 112.0 3.5 90 71P-721TC-8-RL 721TC-8-125’ 1/2 12.5 0.94 24 4000 28.0 16000 112.0 3.5 90 71P-721TC-10-BX 721TC-10-50’ 5/8 16 1.08 27 4000 28.0 16000 112.0 4 100 71P-721TC-10-RL 721TC-10-125’ 5/8 16 1.08 27 4000 28.0 16000 112.0 4 100 71P-721TC-12-BX 721TC-12-50’ 3/4 19 1.21 31 4000 28.0 16000 112.0 4.75 120 71P-721TC-12-RL 721TC-12-125’ 3/4 19 1.21 31 4000 28.0 16000 112.0 4.75 120 71P-721TC-16-BX 721TC-16-50’ 1 25 1.5 38 4000 28.0 16000 112.0 6 150 71P-721TC-16-RL 721TC-16-125’ 1 25 1.5 38 4000 28.0 16000 112.0 6 150 71P-721TC-20-BX 721TC-20-50’ 1-1/4 31.5 1.84 46 3000 21.0 12000 84.0 8.25 210 71P-721TC-20-RL 721TC-20-125’ 1-1/4 31.5 1.84 46 3000 21.0 12000 84.0 8.25 210 71P-721TC-24-BX 721TC-24-50’ 1-1/2 38 2.07 53 2500 17.5 10000 70.0 10 250 71P-721TC-24-RL 721TC-24-100’ 1-1/2 38 2.07 53 2500 17.5 10000 70.0 10 250 71P-721TC-32-BX 721TC-32-50’ 2 51 2.59 66 2500 17.5 10000 70.0 12.5 320 71P-721TC-32-RL 721TC-32-100’ 2 51 2.59 66 2500 17.5 10000 70.0 12.5 320 71



OriginalPartsCNH

GO TO INDEX

17


STYLE 772TC


Tough Cover

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-772TC-10-RL 772TC-10-125’ 5/8 16 1.08 27 4000 28.0 8 200 71P-772TC-12-RL 772TC-12-125’ 3/4 19 1.21 31 4000 28.0 9-1/2 240 71P-772TC-16-RL 772TC-16-55’ 1 25 1.50 38 4000 28.0 12 300 71P-772TC-20-RL 772TC-20-55’ 1-1/4 31.5 1.84 46 3000 21.0 16-1/2 420 71P-772TC-24-RL 772TC-24-55’ 1-1/2 38 2.07 53 2500 17.5 20 500 71

SAE 100R13

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure

BurstPressure


Seriesinch mm inch mm psi MPa psi MPa inch mmP-781-12-BX 781-12-50’ 3/4 19 1.26 32 5000 35.0 20000 140.0 9-1/2 240 78P-781-12-RL 781-12-125’ 3/4 19 1.26 32 5000 35.0 20000 140.0 9-1/2 240 78P-781-16-BX 781-16-50’ 1 25 1.52 39 5000 35.0 20000 140.0 12 300 78P-781-16-RL 781-16-125’ 1 25 1.52 39 5000 35.0 20000 140.0 12 300 78P-781-20-BX 781-20-50’ 1-1/4 31.5 1.96 50 5000 35.0 20000 140.0 16-1/2 420 78P-781-20-RL 781-20-125’ 1-1/4 31.5 1.96 50 5000 35.0 20000 140.0 16-1/2 420 78P-781-24-BX 781-24-50’ 1-1/2 38 2.26 57 5000 35.0 20000 140.0 20 500 78P-781-24-RL 781-24-100’ 1-1/2 38 2.26 57 5000 35.0 20000 140.0 20 500 78




OriginalPartsCNH

GO TO INDEX

18


STYLE 782TC


Hydraulic - Tough Cover

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-782TC-12-RL 782TC-12-125’ 3/4 19 1.26 32 5000 35.0 9-1/2 240 78P-782TC-16-RL 782TC-16-55’ 1 25 1.52 39 5000 35.0 12 300 78P-782TC-20-RL 782TC-20-55’ 1-1/4 31.5 1.96 50 5000 35.0 16-1/2 420 78P-782TC-24-RL 782TC-24-55’ 1-1/2 38 2.26 57 5000 35.0 20 500 78

SAE 100R13

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-701-6-RL 701-6-125’ 3/8 10 0.84 21 6500 45.0 7 180 70P-701-8-RL 701-8-125’ 1/2 12.5 0.97 25 6000 41.5 9 230 70P-701-10-RL 701-10-125’ 5/8 16 1.11 28 5000 35.0 10 250 70




OriginalPartsCNH

GO TO INDEX

19


STYLE 791TC

STYLE 792TC

Hydraulic - Extreme Tough Cover

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-791TC-12 791TC-12-125 3/4 19 1.26 32 6000 42.0 8 200 79P-791TC-16 791TC-16-125 1 25 1.52 39 6000 42.0 10 250 79P-791TC-20 791TC-20-125 1-1/4 31.5 1.97 50 6000 42.0 10 250 79P-791TC-24 791TC-24-50 1-1/2 38 223 56.5 6000 42.0 12 305 79

Hydraulic - Tough Cover

CNH Part No.

Parker Part No.

HoseI.D.

HoseO.D.

WorkingPressure


Seriesinch mm inch mm psi MPa inch mmP-792TC-12 792TC-12-50 3/4 19 1.26 32 6000 42.0 10-1/2 265 79P-792TC-16 792TC-16-50 1 25 1.52 39 6000 42.0 13 330 79

PM-13813



Documents

Bulk Hose Reference Guide - REIS Equipreisequip.com/pdf/parkerhydraulichoses.pdfBulk Hose Reference Guide General properties of each hose offering are displayed throughout the attached