Upload
dotu
View
215
Download
0
Embed Size (px)
Citation preview
BUILT-IN TEPPANMODEL MO-E80
FORMS ONE CONTINOUS OVAL “WELL”HOT SPOT cooking area
4-POINT-ONLY CORNER FASTENINGNO NEED FOR COUNTER REINFORCINGINDOOR + OUTDOOR USE | IPX4 RATED
Also available as Portable Tabletop Model PU-80
10 ft POWER CORD included
1
3
4 MM SOLID STAINLESS STEEL TOP
TEMPERATURE CONTROL
with INDICATOR LIGHTS
8
31-1/2 in | 800 mm
23-5/8 in | 600 mm
3/4 in
20 mm
~22” x ~17”Large Hot Spot
~50 cm x ~30 cm
Sta
inle
ss s
tee
l pro
du
ctio
n u
ses
60
-80
% r
ec
yc
led
ra
w m
ate
ria
l
warm
cool
SINCE 1887 - OVER 125 YEARS OF INNOVATION & PRECISION MANUFACTURING
PATENTED SHALLOW-DIP-TECHNOLOGY + CONTACT HEAT“EDGE” COLLECTION
©2017 p
&p
| w
ww
.co
okn
din
e.c
om
| A
ll rig
hts
, e
rro
rs a
nd
mis
prin
ts r
ese
rve
d.
The manufacturer reserves the right to update, change, alter or discontinue any model without further notice.
TEPPANYAKI SPECIFICATIONSSize: 31-1/2” x 23-5/8” x 2” H| 80 x 60 x 5 cm HRequired install space H: 4” incl. clearance.
Material: Professional Food Grade Best Alloy Premium German Stainless Steel type 304 (V2A)5/32” thick (4 mm | 8 gauge) cold pressed, hand-welded + hand-finishedSilk-brushed | color: Silver
Power: | 1.8 kWh on highElectric: 120V | 50-60 Hz | 2x 15 AMP
Analog temperature control: 1-10 dial | 2 indicator lights | thermostatContact Heat: 150 to 450
Will not fit above standard exterior size 24” deep cabinets.
1800 Watt
REQUIRES 20 AMP BREAKER 240V on request.
ºF ºF (65º - 230ºC)
5 Year Ltd. Warranty Material + Craftsmanship.. Electrical + electronic parts: 1 year Limited parts + labor..VDE issued CE/ GS Safety Approval.
Electrical and Electronic Components: UL approved.
Ship weight ~69 lbs | ship size 36” x 31” x 7”Ship weight ~28 kg | ship size 93 x 77 x 16 cm
BUILT-IN TEPPANMODEL MO-E80
INSTALL SHEET
2 in50 mm
“EDGE” COLLECTION
23-5/8 in | 600 mm
20 in | 508 mm
31-1/2 in | 800 mm
28 in | 710 mm
conduit lengths ~19”| ~450 mm
Electrical Rating: 120V | 1800 Watt |20 AMP
50-60 Hz , 1.8 kWh on high (or 240V|2250 Watt |10 AMP 8check control box label
Bolt length 2 in (50 mm); bolt diameter is 3/16” (5 mm) 8drill 5/16” (8 mm)Ø Ø
IMPORTANT: DO NOT DRILL NOR CUT ANY HOLES BEFORE UNIT IS PHYSICALLY PRESENT ! ! ! DON’T CUT OFF BOLTS ! ! !
8 CAUTION: DO NOT SNAP, PULL or TWIST THE CONDUIT DURING INSTALLATION ! ! ! Warranty expires if silver capillary tube (thermostat) inside the conduit is damaged during installation.8 The Control Box MUST be firmly fastened to a NON-MOVING surface.
1.
2.
3.
4.
5.
Mark bolt positions and drill slightly larger than bolt diameter.
Optional: Apply thin bead of Silicone Sealant around the edges of the underside of the unit. This protects from potential moisture intrusion, especially when installed outside without overhead cover.
Slide cook top into place. Do not apply force. Unit needs to go in without any resistance.
If applicable: Press evenly down to compress Silicone. Secure with supplied bolts and washers.Find bolts, washers and extension for “B” control in a small plastic bag inside the box. !!! IMPORTANT: Tighten bolts with hand tool only. Do not use any power tools!!!
Mark, drill and fasten the control boxes into place
Connect the power cord VERY FIRMLY to the control box. IMPORTANT: Check control box label for
correct voltage!!! Connect the electrical 3-prong plug to a properly grounded power outlet.
Clean counter surface thoroughly!!!
Clean the underside of rim/edges of appliance top with rubbing alcohol or similar.
!!! IMPORTANT: MAKE SURE TO PREVENT SILICONE FROM GETTING INTO THE BOLT HOLES !!!
Optional: seal the round metal plate (box B)with Silicone to prevent potential moisture intrusion.
8REFER TO SEPARATE INSTALL SHEET FOR “B” CONTROL
©2017 p
&p
| w
ww
.co
okn
din
e.c
om
| A
ll rig
hts
, e
rro
rs a
nd
mis
prin
ts r
ese
rve
d.
Shown above: PU-80
Manufacturer reserves the right to change, alter or discontinue any model without notice.
Ed
ge
Co
llec
tio
n
mo
de
lM
O-E
80
size
:8
00
mm
x6
00
mm
31
-1/2
” x
23
-5/8
”
31.5
in | 8
00 m
m
Note
: dra
win
g is
not to
sca
le.
15 m
m
15 m
m
57
0
mm
770
mm
to c
ente
r of
hole
23-5/8 in | 600 mm
CU
T O
UT
SIZ
E
27-1
/2”
x 20”
508 m
m x
698 m
m
Hole for fastening screws
Hole for fasteningscrews
Stem fordial knob
ControlLight Sockets
0
dial knob
Hollow StemExtension
DIRECTIONS: 1. Remove packaging and carefully pull off the DIAL KNOB ONLY while holding on to the round plate. Do not use force or tools!
2. Now separate the round steel plate from Control Light Sockets by carefully wiggling it away WITH the yellow and green light plastic caps
Hold one with two fingers and gently pull plate away; repeat with other. Yellow and green PLASTIC CAPS STAY IN PLACE in the plate.)
3. Mark all necessary holes utilizing the provided template below. Drill required holes and gently thread light sockets through their
designated openings. DO NOT SNAP THE PRONGS! Now fasten the box to interior of cabinet wall or underside of counter top.
4. Gently pull light sockets out a little bit and re-connect with plastic caps in the metal plate; affix plate with two small flathead screws, or
silicone into place.
5. Connect the hollow extension to stem if needed (packed with nuts + washers). Slide dial knob onto stem (match flat side of stem
with flat side of female receptacle at back of knob). Do not use force. The “0” has to align centered below the CDS logo.
CAUTION: DO NOT TWIST OR SNAP DELICATE WHITE WIRING OF INDICATOR LIGHTS.
BUILT-IN TEPPANTYPE “B” CONTROL BOX
CONCEALED MOUNT
4” (102 mm)
3”
(76
mm
)
2-3/8”(60 mm)
5-3/8” (137 mm)
Holes for screws to attach plate
Holefor stem
Control/Indicator Light Plastic Caps
11
/16"
11/1
6"
9/32" 9/32"
1 17/32"1 17/32"
1 13/16 in
4 7/8"
5 3/8"
ø 3/8”10 mm
ø6 mm
7/32”
ø 7/32”6 mm
ø 9/64”3.6 mm
ø 9/64”3.6 mm
ø 9/64”3.6 mm
ø 9/64”3.6 mm
ø 5/8”16 mm
8 CAUTION: DO NOT SNAP, PULL or TWIST THE CONDUIT DURING INSTALLATION ! ! !Warranty will expire if capillary tube inside the conduit is damaged during installation.
Control box must be firmly fastened to a non-moving surface.
8 VERY IMPORTANT NOTE: Do not open the control box or warranty expires!
IMP
OR
TAN
T: T
o u
se a
s 1
:1 t
em
pla
tese
t “p
ag
e s
ca
ling
” to
“n
on
e”
wh
en
pri
ntin
g
Stainless Steel Plate
3-1/8“ dia (80 mm)
cabinetwall
interior cabinet space
exterior
YELLOWGREEN
7 mm39 mm
18 m
m18 m
m
46 mm
39 mm7 mm
124 mm
8137 mm - PLEASE MEASURE ACROSS TO MAKE SURE TEMPLATE IS 1:1
Prongs prevent light sockets from slipping into box only
©2015 p
&p
| w
ww
.co
okn
din
e.c
om
| A
ll rig
hts
, e
rro
rs a
nd
mis
prin
ts r
ese
rve
d.