Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
VISIT THE SOWA TOOL
CLEARANCECENTREHUNDREDS OFGREAT DEALS!
WWW.SOWATOOL.COM
2015 Fall FlyerPricing valid from October 1 to December 31, 2015
Canadians Supporting Canadians
ASK FOR OR DOWNLOAD THIS“BUILD YOUR OWN PACKAGE” BROCHURE.
SIMPLY FILL OUT THIS CONVENIENT CHECKLIST &ALLOW US TO OFFER OUR MOST COMPETITIVE QUOTE.
• CAT40 Taper Tooling Balanced to 30,000 RPM• CAT50 Taper Tooling Balanced to 25,000 RPM• DIN Coolant Thru The Flange - Standard• All Traverse Ground Body• 100% Forged Construction
FEATURES & BENEFITS
• Dual Contact Holders & Chucks• Direct Coolant End Mill Holders• Balanceable Shrink Fit
NEW PRODUCTS
Download atwww.SowaTool.com
BUILD YOUR OWN REFRESHING MIX OF HIGHPERFORMANCE TOOLHOLDERS
21 Bradwick Dr., Unit 20Concord, ON L4K 1K6Tel: 905-760-2500Fax: [email protected]
Distributed by:
2
5 PC COBALT METRICCOUNTERSINK SETS
• M35 Cobalt• Wide flutes provide good chip evacuation• Positive cut• Constant profile aids regrinding of the tool• Self-centering of the cutting mill (three bearing points)virtually eliminates vibration
Description Code No. SALE $Cobalt sets include 6.3mm, 10.4mm, 16.5mm, 20.5mm, 25.0mm82º 121-860 205.3490º 121-865 205.34TiN Coated sets include 10.4mm, 16.5mm, 20.5mm, 25mm, 31mm82º 121-870 318.29
EuropeanMade
121-86590º
121-87082º
CCUUTTTTIINNGG TTOOOOLLSS
Description Code No. SALE $ MultiBurr RG1000 165-371 89.55
• S10 blade (steel, aluminum, plastic)• D50 scraper blade (ideal for tool & die makers)• N2 blade (brass, cast iron)• Rotodrive countersink blade (1-10.4mm, 90º)
• Each tool has a separate lever which enables the opening of the unit
• A single spring lock will release and close all the tools
NEW PRODUCT!
Four of Noga’s most popular multi-purpose blades in one innovative tool set.
MULTIBURR-RG1000
DS4 INDEXABLE CUTTER BUNDLES
Get a 1-1/4” DS4 End Mill and 20 LNMX151008 Inserts
Get a 2” DS4 End Mill and 30 LNMX151008 Inserts
Promo Code: 500-753Features:• Double sided insert with 4 useable cutting edges• Special indexable tool using strong negative insert having high rake angle cutting edges
• Multi-functional tool covers facing, side cutting, shouldering, slotting, ramping, and helical cutting Coolant through
Designation Code No. List $LNMX 151008 PNR-M PM30P 145-678 35.80
Cutting ShankDesignation Dia. Dia. Flutes Code No. List $DS4 4125HR-S125 1.250” 1.250” 2 148-870 716.00
Promo Code: 500-752Features:• Double sided insert with 4 useable cutting edges• Special indexable tool using strong negative insert having high rake angle cutting edges
• Multi-functional tool covers facing, side cutting, shouldering, slotting, ramping, and helical cutting Coolant through
Designation Code No. List $LNMX 151008 PNR-M PM30P 145-678 35.80
Cutting ShankDesignation Dia. Dia. Flutes Code No. List $DS4 4200HR-S125M 2.000” 1.250” 4 148-872 1,074.00
Dia. Knurl Face HoleHolder Size (in.) (in.) Size (in.) (in.) Code No. SALE $3⁄4 x 1-1⁄4 x 7 3⁄4 3⁄8 1⁄4 474-200 254.31
REVOLVING KNURLINGTOOL HOLDER
These tools are fitted with four pairs ofknurls; any of which can be instantlybrought to bear on the workpiece. Furnished with standard face diamond pattern knurls in fine and coarse pitch.
45º MAX MILL KITS -CUTTER BODY + 10 INSERTS
• 1 - MM 45º Face Mill• 10 - SEXT 14M4 PM25C Inserts (Coated)• For high speed milling of Steel and Stainless Steel• Excellent general purpose geometry
Cutter Inserts Code No. SALE $2-1/2” 4-flute (147-812) SEXT 14M4 AGSN PM25C (147-730) 149-934 394.643” 5-flute (147-813) SEXT 14M4 AGSN PM25C (147-730) 149-936 352.56
$338.60
$425.00
3
CCUUTTTTIINNGG TTOOOOLLSS
PT22CFor Steel Turning New CVD Grade (P20)
• Coating with good surface roughness and weldingresistance
• Coating with oxidation resistance at high temperatureand plastic deformation resistance
• Coating with excellent chipping resistance due toimproved adhesion
DCLNR Double Clamp Toolholder
DDJNR Double Clamp Toolholder
DSDNN Double Clamp Toolholder
Min.Description Shank O.A.L Bore Code No. SALE $DDJNR 16-4D 1.000” 6.000” 1.250” 148-296 90.99
PT22C
C oa ting with ox id a tion r e s is ta nc e a t hig h te mp e r a tur e a nd p la s tic d e for ma tion r e s is ta nc e .Improved wear res is tanc e on the rake s urfac e of ins ert
E x c lus iv e s ub s tr a te ma te r ia l for c oa ting imp r ov ing we a r r e s is ta nc e .Improved wear res is tanc e on the !ank s urfac e of ins ert
C oa ting with good s urfa c e roughnes s a nd welding res is ta nc e.C oa ting with oxida tion res is ta nc e a t high tempera ture a nd pla s tic deforma tion res is ta nc e.C oa ting with exc ellent c hipping res is ta nc edue to improved a dhes ion.F ine c oa ting la yer with toughnes s a nd wea r res is ta nc e.E xc lus ive s ubs tra te ma teria l for c oa ting improving wea r res is ta nc e.
F ea tures of PT22C [New c oa ting la yer with oxida tion res is ta nc e a nd a dhes ion]
S uperior s urfa c e !nis h
[ C urrent gra de ] [ New gra de (PT22C ) ]
Imp r ov e d a d he s ion a nd
s ur fa c e !nis h
S table mac hining and inc reas ed welding res is tanc e and wear res is tanc e
[ C urrent gra de ]
[ S ubs tra te of c oa ting la yer ] [ S ubs tra te of c oa ting la yer ]
[ New gra de (PT22C ) ]
[ F or F inis hing ] [ F or medium- !nis hing ] [ F or medium ma c hining ]
PT22C
FOR MORE INFORMATIONABOUT THE PT22C INSERT CALL TODAY TO GET A COPYOF OUR TECH BROCHURE OR
DOWNLOAD IT ATwww.sowatool.com
PT22CFor Steel Turning New CVD Grade (P20)
• Coating with good surface roughness and weldingresistance
• Coating with oxidation resistance at high temperatureand plastic deformation resistance
• Coating with excellent chipping resistance due toimproved adhesion
WE ARE CHANGING OUR PT20C TOTHE NEW AND IMPROVED PT22C GRADE
Min.Description Shank O.A.L Bore Code No. SALE $DCLNR 16-4D 1.000” 6.000” 1.250” 148-292 90.99
Min.Description Shank O.A.L Bore Code No. SALE $DTJNR 16-4D 1.000” 6.000” 1.250” 148-156 90.99DTJNL 16-4D 1.000” 6.000” 1.250” 148-345 90.99
Min.Description Shank O.A.L Bore Code No. SALE $DSDNN 16-4D 1.000” 6.000” 1.375” 148-302 90.99
INDEXABLE CUTTING TOOLS
INDEXABLE CUTTING TOOLS
INDEXABLE CUTTING TOOLS
INDEXABLE CUTTING TOOLS
Min.Description Shank O.A.L Bore Code No. SALE $DVJNR 16-3D 1.000” 6.000” 1.250” 148-349 106.38
DVJNR Double Clamp Toolholder
DWLNR Double Clamp Toolholder
MWLNR Boring Bar
MCLNR Boring Bars
Min.Description Shank O.A.L Bore Code No. SALE $DWLNR 16-4D 1.000” 6.000” 1.250” 148-351 100.35
Min.Description øD ød L Bore Code No. SALE $
A16T-MWLNR-4 1.280” 1.00” 12.0” 0.640” 148-353 119.34
Coolant Hole Boring Bar
Coolant Hole Boring Bar
INDEXABLE CUTTING TOOLS
INDEXABLE CUTTING TOOLS
INDEXABLE CUTTING TOOLS
DTJNR/L Double Clamp Toolholders
INDEXABLE CUTTING TOOLS
Min.Description øD ød L Bore Code No. SALE $
A16T-MCLNR-4 1.280” 1.00” 12.0” 0.640” 148-363 119.34A20U-MCLNR-4 1.530” 1.25” 14.0” 0.765” 148-365 184.14
NEW
NEW
NEW
NEW
NEW
NEW
4
CCUUTTTTIINNGG TTOOOOLLSS PPRREECCIISSIIOONN TTOOOOLLSS
• Solid Tungsten Carbide• Comes in a fitted protective case• Double cut
Description Code No. SALE $1/8” shank 172-984 71.141/4” shank 172-986 130.94
8PC SOLID CARBIDE BURR SETS
FLAP DISCS - TYPE 27
Dimensions (in.) Grit Code No. SALE $4-1/2 x 7/8 60 635-656 6.904-1/2 x 7/8 80 635-657 6.90
5 x 7/8 60 635-658 8.285 x 7/8 80 635-659 8.287 x 7/8 60 635-661 14.167 x 7/8 80 635-663 14.16
• Combines the advantages of the flexible grindingwheel and sanding disc paper
• Rapid stock removal with excellent finish in one operation
• No backing pad required
STANDARD ACCESSORIES• Impact device 1 pc • Paper for printing 1 pc• Hardness test block 1 pc • Manual 1 pc• Small support ring 1 pc • DataPro software 1 pc• Cleaning brush 1 pc • Communication cable 1 pc• Battery charger 1 pc
• High Speed Steel
5PC CHATTERFREE HSSCOUNTERSINK SET
Description Contents Code No. SALE $82º Sizes 0, 1, 2, 3, 4 121-035 316.65
• High Speed Steel
9PC SINGLE FLUTE 82º HSSCOUNTERSINK SET
Description Contents Code No. SALE $82º 3/16, 1/4, 5/16, 3/8, 120-850 167.93
1/2, 5/8, 3/4, 7/8, 1
3-JAW PUNCH FORMER
Description Code No. List $3-Jaw Punch Former 230-740 2,931.60
Limited Supply Only 2pcs
• With 2 dial gauges (1" for vertical and 2" table travel)• Large 12" x 3" t-slot stage with 6" horizontal and 2-1/2" vertical travel
• 12" diameter protractor screen• Rotatable screen with fine adjustment• Selectable high and low intensity profile illumination switch
• Vernier resolution of 5 minutes• Overlay clips• Digital indicator and V-Blocks are not included
12” OPTICAL COMPARATOR
Description Note Code No. SALE $12” Optical Comparator Lens 10X 7641090 2,632.65
• Large screen (128×64 dot matrix LCD), allows for clear display of all functions and parameters
• Hardness test can be taken at any angle including inverted.• A wide measuring range supports the hardness of all metallic materials. Hardness results are directly displayed in HRB, HRc, HV, HB, HS, HL hardness scales.
• Diameter of carbide ball: 3mm.• Large capacity memory storage of 500 sub groups. Stored information including single measured value, mean value, test data, impact direction, impact times, material and hardness scale are available.
• Five languages are supported: English, French, German, Italian and Spanish• Upper and lower limit can be preset. An alarm will sound when outside of set limits• Battery voltage information is displayed including the charge status.• Calibration function is available.• USB1.1 port allows for information to be uploaded directly to a PC.• 6V Ni-MH rechargeable battery is supplied. The batteries can be charged with the integrated charger. Up to 150 hours of continuous operation battery life between charges
• Automatic power off after five minutes.• For testing a normal, smooth, flat surface
• Used for the visual comparison of surfaceroughness
• Set of 30 specimens, 7/8” x 3/8” electro-formed, solid nickel
SURFACE ROUGHNESS STANDARDS SET
IMPACT HARDNESS TESTER
Description Code No. SALE $Surface Roughness Standards Set 7506010 235.95
Impact ImpactRange Accuracy Device Cap. Code No. SALE $
HLD (170-196) HLD ±5 D 11 Nmm 7640171 2,130.00HRC (17-68.5) HRC ±1HB (19-651) HB ±4
• 24 divisions (15º each) with 10sec accuracy• Can be used in conjunction with a sine plate to make sine angles
• Through hole for grinding longer punches• Supplied with 1 set of solid outside jaws, 1 set of solid inside jaws, chuck wrench, 2 hexwrenches $1,386.00
5
PPRREECCIISSIIOONN TTOOOOLLSS
• 2-3/8 dial face• ABS sensor• Absolute linear encoder track or pin• 3/8 stem diameter
IDC DIGIMATIC INDICATORS
• Solar powered - min. 40 lux illumination• Flat back• Stem dia. - 3/8”• Inch/Metric conversion• Automatically restores the last origin point
With ABSOLUTE ENCODER
Mitutoyo Range Resolution SowaModel (in/mm) (in/mm) Code No. SALE $
543-392B 0-.5”/0-12.7mm .00005”/0.001mm 840-616 414.80543-683B 0-.5”/0-12.7mm .0005”/0.01mm 841-493B 173.40
ABSOLUTE SOLAR DIGIMATICID-S INDICATOR
MDC LITE DIGIMATIC MICROMETER
Mitutoyo Range Resolution SowaModel (in/mm) (in/mm) Code No. SALE $
543-507B .5”/12.7mm .0005”/0.01mm 848-057 182.75
• Extra large LCD readout• Carbide face• Inch/Metric conversion• Ratchet Stop
• Ultra smooth slide• High shock protection• Carbide tipped OD and ID jaws• Supplied in fitted plastic case
Mitutoyo Range Resolution SowaModel (in/mm) (in/mm) Code No. SALE $293-831 0-1 / 0-25.4mm .00005 / .001mm 842-888 139.40
12” DIAL CALIPER - SERIES 505
Mitutoyo Range Graduation SowaModel (in) (in/mm) Code No. SALE $505-714 0-12” .001” 845-523 520.20
Clearance
Clearance
SURFACE PLATE CLEANERFeatures:• An exclusive formulation that isextremely effective for the cleaningand care of granite surface plates• Works quickly and effectively,leaves no residue on the granite.
Description Code No. SALE $Pint 7607510 7.40
Pint Spray Bottle 7607520 8.84Quart 7607530 13.69
1/2 Gallon 7607540 22.44Gallon 7607550 30.525 Gallon 7607560 76.84
24” DIGITAL HEIGHT GAUGE &SURFACE PLATE COMBO
• 0-24”/600mm• Resolution: .0005”/0.01mm• Fine adjustment• Inch/Metric conversion
Code # 7625240List $834.60
• 24” x 36” x 4” No Ledge• Grade B - Tool Room• Made of highest quality black granite• 475 lbs
Code # 255-115List $696.20
$970.00Code # 500-729
• Sharp stereo erect image over a wide field of view. It issuitable for spot examination of machinery industry, papermaking, print and textile, etc. The product features smallsize, light weight, nice design and easy operation• Eyepiece: WF10X, Graduation 0.025mm• Pen illumination• Field of view: 1.6mm• Working distance: 7mm
Standard Accessories:• Eyepiece, Lamp, Instruction manual
MICROSCOPE XC-100L
Graduation Magnification Objective Code No. SALE $0.01mm 100X 10X 7642010 224.72
NEW PRODUC
T!
VERTICAL PROFILE PROJECTOR
• Direct imaging• Stage size: 340 x 152mm• Glass table: 196 x 96mm• Projector Screen: 12”, usable range >300mm• Objective lens: 10X• Dimensions: 770 x 550 x 1100mm• 130kgs
• Designed to provide excellent quality images with accurate magnification
• The error of the contour measuring is under 0.08% deviation
• Convenient foot switch transfers the coordinate data to the data processing system
Description Code No. SALE $Vertical Profile Projector 7641010 10,678.43
6
SSHHOOPP SSUUPPPPLLIIEESS
Features:• For easily and quickly cleaning spindle holes.• Plastic body, the taper wiper is made of special cotton material therefore not damaging the spindle.
• The BT & DIN tapers are the same.
SPINDLE TAPER WIPERS
Model Taper Total Length Code No. SALE $ VTW-40 #40 159mm 326-215 26.96VTW-50 #50 265mm 326-220 39.20
12” HACKSAW FRAME
9PC COMBINATIONWRENCH SET
A rugged heavy-duty industrial qualityhacksaw designed for the professional.• Strong aluminum die cast handle• Guarded grip design• Comes complete with a 12” chromesteel hacksaw blade
Model O.A.L. Bow Depth Code No. SALE $ HF/12/BC 17-5/16” 4” 231-370 18.75
New Product!
• 1/4" - 3/4”• Mirror polished• Drop forged• Hardened and tempered
Description Code No. SALE $ 9pc Combination Wrench Set 505-001 23.20
TOOL BOXES
• ABS plastic• VTB-102 has two levered trays• VTB-901 has one removable tray
VTB-102 VTB-901
DimensionsModel (mm) Code No. SALE $VTB-102 420W x 235D x 180H 326-546 61.44VTB-901 378W x 182D x 144H 326-547 24.00
New Product!
• ±0.02mm accuracy
• 3/4”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”
• HSS• Comes with 2 arbors, 1 pilot drill and 1 adapter
13PC BI-METAL HOLE SAW SET(JOURNEYMAN)
Description Code No. SALE $Journeyman Hole Saw Set 505-020 75.00
POCKET REFERENCE BOOK4TH EDITION
Information for do-it-yourselfers, engineers, craftsmen,students, teachers, managers, maintenance & industrialpersonnel, and travelers. The ultimate reference andproblem solver. The uses for this book are endless! 864pages of valuable information in an easy to use pocketreference book. 3.2” x 5.4” x 0.8”
• Automotive • Geology• Steels & Metals • Math• Electrical • Welding• Tools • Conversion tables• Weights & Properties • and much moreof materials
Code No.: 180-175 $21.15
UTILITY KNIVES
Description Code No. SALE $Folding Cutter Knife 505-010 4.58Snap-Off Blade Utility Knife 505-011 1.25
• Coloured fleece• Disposable cloth wiping rags
Code # 891-527 $22.37
25LB BAG OF COLOURED COTTONWIPING RAGS
PRECISION SQUARE LEVELS
Model Dimensions (mm) Weight (kg) Code No. SALE $ VSL-200A 200x200x40 3.8 230-370 230.40VSL-300A 250x250x40 5.8 230-380 338.88
MACHINISTS’ CHESTMODEL NO. 52611
11 Drawer – Drawers and top compartmentfelt lined. Front panel covers drawers.• 3 drawer dividers• Side handles
Width Depth Height(in) (in) (in) Colour Code No. SALE $
26-3/4 8-1/2 18 Brown 609-615 655.01
7
Contents:• 1/8”-27 PTF - 25pcs straight, 10pcs 45º, 10pcs 90º• 1/4”-28 SAE-LT - 15pcs straight, 10pcs 45º, 10pcs 90º
Model Code No. SALE $ GFT/KIT/SAE-80 231-386 58.05
80PC SAE GREASE FITTINGASSORTMENT
FILTER REGULATORS& LUBRICATORS
FILTER REGULATORCOMBINATION
AACCCCEESSSSOORRIIEESS
231-484
231-486231-488
FRCLM-13MINIATUREMax flow rate:18 CFM / 12 LPMMin flow rate:0.42 CFM / 12 LPMThreaded type steelbowl guardBowl Size (Filter): 9 ml
(Lubricator): 20 ml
FRCLM-15STANDARDMax flow rate:99 CFM / 2800 LPMMin flow rate:1.59 CFM / 45 LPMBayonet type steel bowl guard,Regulator with in-built Venturifor Flow CompensationBowl Size (Filter): 44 ml
(Lubricator): 152 ml
FRC-15STANDARDMax flow rate:106 CFM / 3000 LPMBayonet type steel bowl guard,Regulator with in-built Venturi forFlow CompensationPressure Gauge Port Size: 1/8”
The Filter-Regulator Combination is one of the most popular airpreparation units. The 2 are assembled together to forma single unitFilter is designed with a Separator & shield for efficient moistureseparation. It is combined with a Regulator which maintains asteady outlet pressure, unaffected by variations/fluctuations in theinlet pressure
The Filter-Regulator Combination & Lubricator are attached in series using spacers &piping adapters, which makes the 2 components easily removable / mountable withoutdisturbing the pipe line. Come complete with a wall mounting bracket.
• Max PSI: 145 (10BAR)• Ambient Temp0-60ºC (32-140ºF)
• Pressure Gauge Port Size1/8”
• Max 145 PSI (10BAR)• Ambient Temp0-60ºC (32-140ºF)
Model Description Port Size Code No. SALE $ FRCLM139134-S Miniature 1/4” 231-486 124.13FRCLM159334-S Standard 1/2” 231-488 223.95
Bowl SizeModel Description Port Size Oz. ml Code No. SALE $
FRC159334-S Standard 1/2” 1.5 44 231-484 125.18
DM1226FAST DRILL RE-SHARPENING MACHINE
Patented Features
• Double-bearing grinding unit (reduces wear).• Drill tightened design with bearing device.• Adjustable trimming angle.
Standard Accessories
• ER40 Collets, 12mm-26mm (15pcs).• CBN Dia. wheel #200x1pc (for HSS drill).• 3mm and 4mm Hexagon (Hex.) wrench x 1 pc each.
DM213FAST DRILL RE-SHARPENING MACHINE
Patented Features
• Double-bearing grinding unit (reduces wear).• Drill tightened design with bearing device.• Adjustable trimming angle.
Standard Accessories
• ER20 Collets, 2.5mm-13mm (12pcs).• CBN Dia. wheel #200x1pc (for HSS drill).• 3mm and 4mm Hexagon (Hex.) wrench x 1 pc each.
Model DM213Code No. 326-130List Price $2,140.60
Sale Price $1,510.74Drill Diameter: Ø2mm - Ø13mmPoint Angle: 85° ~ 140°Power Supply: AC110 / AC220 50/60HZMotor: 90WR.P.M: 6000RPMWeight: 10 kg
Model DM1226Code No. 326-134List Price $4,870.80
Sale Price $3,437.77Drill Diameter: Ø8mm - Ø30mmPoint Angle: 85° ~ 140°Power Supply: AC110 / AC220 50/60HZMotor: 450WR.P.M: 4000RPMWeight: 25 kg
Premium Drill Sharpening Machines
Approved
Printed in Canada
*CADIS32*
Pricing valid from October 1 to December 31, 2015 or while quantities last.
Sowa Tool & Machine Co. Ltd.500 Manitou DriveKitchener, OntarioN2C 1L3
Toll Free: 1-800-265-8221Phone: (519) 748-5750Fax: (519) 748-9304Email: [email protected]: www.sowatool.com
Western Canada Branch9649-49th AveEdmonton, ABT6E 5Z5
Looking For Excellent Quality MeasuringTools At An Affordable Price?
Total value of over $557.00For only
$358.00!order by Promo Code #500-122
Includes 1 each of the following:• 0-1” Micrometer .0001” 7101013 List $74.90• 1-2” Micrometer .0001” 7101023 List $80.10• 6” Digital Caliper .0005” 7307065 List $107.40• 0-1” Dial Indicator .001” 7402261 List $70.90• Magnetic Base 7601011 List $39.50• .0005” x .030” Test Indicator 7501733 List $119.60• 6” Pocket Rule 7606009 List $3.20• Engineers Black Book 180-155 List $61.70
BACK TO SCHOOL SPECIAL!START UP KIT