Upload
trankhue
View
219
Download
1
Embed Size (px)
Citation preview
BUILDING TECHNOLOGY 3 TUTORIAL 4: REVIT – PRECAST PANELS
Created by:
Prof. JIEUN YANG [email protected]
Draw walls with basic cavity wall
PRECAST PANELS – OPTION 1 USING PARTS
Make sure to check base & top constraints
Wall > Edit type > Duplicate “Precast Panel on CMU” > Edit structure > Make outer layer 3” Precast Concrete
PRECAST PANELS – OPTION 1 USING PARTS
1 2
3
4
5
Select all division lines > Properties > Division Geometry > Change Gap, Division Profile, Edge Match
PRECAST PANELS – OPTION 1 USING PARTS
Note that each panel is associated with base level
Make sure to check Visibility & Graphics > Parts should be checked
PRECAST PANELS – OPTION 1 USING PARTS
In 3D
In Elevation
Select a panel > Edit division > Select all panels > Intersecting references > Select levels & offset for horizontal breaks
PRECAST PANELS – OPTION 1 USING PARTS
1 2
Annotate > Tag by category > Click on a panel > Load part tag > Manually name the tag
PRECAST PANELS – OPTION 1 USING PARTS
Manually name the tags (ignore warning for duplicate “mark” values)
PRECAST PANELS – OPTION 1 USING PARTS
View > Schedules > Make a new parts schedule
PRECAST PANELS – OPTION 1 USING PARTS Note that overall inner layers of walls are also considered as parts
Draw walls with curtain wall
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
Make sure to check base & top constraints
Duplicate wall type & Change curtain panel type to precast panel
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
1 2
3
Add wall reveal > Duplicate “Reveal Precast” > Set Profile
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
1 2
Add windows
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
Sometimes cannot placed over multiple panels
Annotate > Tag by category > Click on a panel > Load curtain panel tag > Manually name the tag
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
Note all have same tags – It’s because the tag is associated with Type Mark > Click on tag > Edit family
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
Click on label > Edit type > Delete type mark > Replace with mark > Save > Load into project
PRECAST PANELS – OPTION 2 USING CURTAIN WALL
PRECAST PANELS – OPTION 2 USING CURTAIN WALL Manually name the tags (ignore warning for duplicate “mark” values)
View > Schedules > Make a new curtain panels schedule
PRECAST PANELS – OPTION 2 USING CURTAIN WALL Note that overall curtain wall is also considered as curtain panels