Building Owners + Property Mgrs - Applications Focus 9-7-2010v2

Copyright 2010 Creative Material Technologies, Ltd.

Innovative Green Coating Systems

Solutions for Building Owners and Property Managers

Presented at: Architects & Specifiers MtgDetroit, MI – Sept 7, 2010

Creative Material Technologies, Ltd


New Green Coating TechnologiesThe New Principles to Specify By:

• Physical Properties• Application Needs• 100 Percent Solids- No Solvents or Water• Crosslink Density for “Barrier Coatings”• Evolving Environmental Landscape • Applicable ASTM Standards for these

Technologies


Advantages of CMT Green Polyurea No VOC’s and Little to No Odor Some Systems Comply with USDA Regulations Weather Tolerant: Cures at -25ºF to >300ºF even in High

Humidity Excellent Resistance to Thermal Shock Flexible: Bridges Cracks Waterproof, Seamless and Resilient Unlimited Mil Thickness in One Application Spray, Hand Mix and Caulk Grade Materials Excellent Bond Strengths to Properly Prepared Substrates Resistant to Various Solvents, Caustics and Mild Acids Low Permeability, Excellent Sustainability


Advantages Over Other Coatings1. 100% Solids Means NO water or solvents

- therefore zero or near-zero odor

2. Zero VOC’s (Volatile Organic Compounds)Defined as less than 5 grams per liter of listed solvent (one that has atmospherically reactable carbon on the outer ring of the molecule)

3. Does Not Outgas with any Fumes or Vapors

Out gassing is the result of solvents and/or water volatilizing into the environment- including exempt solvents


Advantages Over Other Coatings4. Rapid Cure Time = Short Down Time

Back to service as quick as 10 minutes

5. Very Tough and Durable CoatingExcellent and Impact resistance with high elongation ( 700+ %)

6. Aliphatic Coatings are Very UV/Sunlight Resistant; Ideal for Outdoor Applications

7. Wide Thickness Capability – from 5 to 300 Mils or More


Polyurea Chemical Resistance


Typical Physical Properties of Polyurea “The Key to Formulating for Performance is Balancing Properties”


Current Environmental Landscape• LEED Credit Qualified• Green Tax Credits Available (Jurisdictional)• EPA-OSHA Issues• Arsenic In PT Wood

– EPA action expect to address ground contamination and human contact

• Flash Point Regulations • VOC Regulations – (Reducing or Eliminating)

– i.e. New York City’s New Code

• OSHA Spraying regulation-– Exposures to ISO Free Monomer


Coatings Needs Assessment

• The Specifier of Every High Performance Coatings Application MUST ASSESS the Following:Best Application MethodRequired Physical PropertiesPotential for “Catastrophic” Failure

either in intercoat adhesion failure, primer failure, or coating failure

Required Surface Preparation


Specialty Flooring


Industrial Floor CoatingsIndustrial Floor Coatings


Insulated Concrete Forms (ICF’s)


Seal Asphalt Roofing and Prevent Ice Dam Damage


Crack Fillers


Waterproofing


DecksDecks


Wooden Structures


Play Structures


Roof CoatingsRoof Coatings


Benefits to Architects and Builders

• Green Environmentally Safe products• Long term solutions sets with long

service life cycles• Prevents Early Life Cycle Maintenance

Costs • Ease of installation• Non disruptive applications• No Solvents or Out gassing


Benefits to Specifiers

• Green solutions

• Superior solutions offering very long service life

• Zero solvents and EPA complaint

• Quick Return to Service

• Adaptability to the life cycle needs of the facility or property


Benefits to Your Customers

• Safer user friendly

• Zero solvents and Low Free Monomer formulations

• One day turn around

• Decorative Coatings with Industrial Properties

• Easy to Ship Not a HAZMAT


Creative Material Technologies, Ltd.

“Solving Today’s Problems with Tomorrow’s Technologies”

What Problems Will We Solve Together?

WWW.DYNASOLV.COM

Documents

Building Owners + Property Mgrs - Applications Focus 9-7-2010v2