65
Building Automation Systems from Internet of Things Professor Jerker Delsing EISLAB Luleå University of Technology

Building Automation Systems from Internet of Things · Building Automation Systems from Internet of Things ProfessorJerkerDelsing ... CoAP DPWS OPC-UA HTTP 1.1 TCP Semantics Compression/EXI

Embed Size (px)

Citation preview

Building Automation Systems from Internet of Things

Professor  Jerker  Delsing  EISLAB  

Luleå  University  of  Technology

Heathrow terminal 5

5 million connected points!!

What  about  London  railway  then?  

X.XXX.XXX  number  of  bearings  

Connected  bearings  will  support    

Bearing  condition  monitoring  

Railway  wagon  condition  monitoring

IoT Product Segments

Conveyor (Tier2) Components and Parts (Tier3) Drive Heads LTU & Winches Belt Structure Belting Pulleys Feeder Breakers Components (a.u. idlers, motors, etc.)

Suppliers of these Products are: Potential partners, and; Future Service Providers

One  customer,  KGHM,  one  component  • 120  km  conveyers  • 720.000  idler  bearings  

The automation challenge

Annual growths more than 10% and over 500 billion connected devices are expected worldwide by 2025. - Cisco 2013

Massive automation systems not possible with current technologies

Not enough many engineers on the globe to do the job with current technology

ISA-95 systems in to the cloud?

The

www.arrowhead.eu

Collaborative automation

CHPHomes, offices & industry

Resources Product market

RAW MATERIAL PRODUCTS

WASTE

HEAT, EL

HEAT, EL HEAT, ELHEAT, EL

URBAN ENERGY INTEGRATION

PRIMARY PRODUCT CYCLE

A European Roadmap for Industrial Process Automation based on global trends and industrial needs. www.ProcessIT.eu

Benefits to the production industry - Spire

• BeJer  opKmizaKon  and  coordinaKon  of    single  processes  or  process  chains  and  of  complete  plants  and  sites,    

• Significantly  improved  resource  efficiency.    • BeJer  coordinated  control  loops  in  one  process  step  and  improved  collaboraKon  of  control  systems  of  different  processes  along  a  process  chain  give  higher  process  yields  which  results  in  beJer  material  efficiency,  waste  reducKon,  less  energy  use  and  reducKon  of  polluKon.  

• Improved  product  quality  through  beJer  process  control  and  smart  quality  control  • Higher  uKlizaKon  of  equipment  • New  collaboraKve  soluKons  with  integrated  informaKon  management  offer  new  possibiliKes  for  supply  chain  management  including  price-‐based  coordinaKon  or  opKmised  market  mechanisms  

• Safer  operaKon  of  plants  due  to  improved  control  and  shut-‐down  procedures.    • PossibiliKes  to  integrate  mulKple  processes.  • Shorter  delivery  Kmes  and  lower  producKon  cost.

www.arrowhead.eu

10

Arrowhead Process and energy system automation

4 years project 68M€79 partnersCoordinated by

an ARTEMIS CoIE

www.arrowhead.eu - [email protected]

ARTEMIS Industry Association The association for R&D actors in embedded systems

www.arrowhead.euwww.arrowhead.eu

CollaboraKve  automaKon  

To be demonstrated in real world applications

www.arrowhead.eu

12

ISA-‐95  systems  in  to  the  cloud?The

13

Arrowhead  approachesTCP/IP  everywhere,  middleware  nowhere.  

Internet  of  Things  -‐  IoT  

System  of  systems  -‐  SoS

The  Integrating  approach  

Service  Oriented  Architectures  -‐  SOA

14

The  global  cloud  approach

A Survey of Commercial Frameworks for the Internet of Things. Hasan Derhamy, Jens Eliasson, Jerker Delsing, and Peter Priller, SOCNE workshop at ETFA 2015, Luxemburg

www.arrowhead.eu

15

Collaborative  automation  in  the  cloud

Automation  is  local  -‐  requirements  on:  Real  time  Security  and  safety  Continuous  engineering    

Local  clouds  are  beneficial  to:  Latency  -‐  real  time  Security  -‐  supporting  safety  Less  engineering  dependencies  

Inter  cloud  actions  are  necessary  and  possibly  secure!

16

Automation using SOA Demonstrated in e.g.

Socrades and IMC-AESOP projects

17

Classical  automation  system  characteristicsCentralised  controllers,  DCS,  SCADA,  PLC,    

Pull  based  -‐  time  slotted  streaming  of  all  data  

Hard  real  time  

Design  time  bindings  

Seams  to  have  an  upper  bound  of  X*105  I/O’s

18

Cloud  based  automation  systemsChoice  of  centralised  or  distributed  control  and  data  to  information  computations  

Push  on  event  or  pull  

Late  binding  -‐  runtime  binding  

Hard  real  time?

www.arrowhead.eu

19

IoT  -‐  propertiesThings  comes  and  goes  

May  have  limited  bandwidth  

May  have  limited  energy  supply  

Interoperable  services  at  the  device  connected  to  the  Internet    

Integration  of  IoT  systems  have  to  be  dynamic  

Based  on  demand  and  availability

20

Expectations on IoT automation

Integrate any IoT device Real time Energy consumption Engineering Trust

Secure Safe Privacy

Migration into/from legacy systems

21

Cloud  integration  of  any  IoT  deviceCommunication  HW  

Existing  commercial  technology  

SOA    

But  which  SOA  technology

22

Service  Oriented  Protocols  -‐  A  Challenge

IPv4/IPv6/IP multicast

UDP

CoAP DPWS OPC-UA

HTTP 1.1TCP

SemanticsCompression/EXI

DDS uPnP

Application

Pilot A XML def

Pilot B JSON def

Pilot C XML def

Pilot D JSON def

Pilot E XML def

Pilot A Service def

Pilot B Service def

Pilot C Service def

Pilot D Service def

Pilot E Service def

XMPP MQTT

23

One  Service  Oriented  Protocols  -‐  Works!

IPv4/IPv6/IP multicast

UDP

CoAP DPWS OPC-UA

HTTP 1.1TCP

SemanticsCompression/EXI

DDS uPnP

Application

Pilot A XML def

Pilot B JSON def

Pilot C XML def

Pilot D JSON def

Pilot E XML def

Pilot A Service def

Pilot B Service def

Pilot C Service def

Pilot D Service def

Pilot E Service def

XMPP MQTT

24What  about  service  protocol  interoperabilityIs  it  possible  to  make  machine  assisted  translation  like  

CoAP -> XMPPCoAP -> MQTTCoAP -> OPC-UAOPC-UA -> CoAPOPC-UA -> MQTTNecessary semantics translationNecessary data structure translationsService integrity over protocols, data structures, semantics etc.

Hasan Derhamy, Pal Varga, Jens Eliasson, Jerker Delsing and Pablo Punal Pereira Translation Error Handling for Multi-Protocol SOA Systems, ETFA 2015, Luxembourg

25

Hard  real  time  IoT  cloudHard real time dependent on underlaying communication capabilities

Local hard real time cloud to prescribe communication technology e.g. Industrial ethernet, TTTech, time slotted 802.15.4

SOA overhead eats bandwidth Use compression EXI

EXIP: A Framework for Embedded Web DevelopmentKyusakov, R., Punal, P., Eliasson, J. & Delsing, J. Oct 2014 In : ACM Transactions on the Web. 8, 4, 29 p.23

www.arrowhead.eu

26

Real  Kme  local  cloud  automaKon &  inter  cloud  automaKon

Real  time  Local  cloud  #1

IASM

II

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

Real  time  Local  cloud  #2

IASM

II

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

Real  time  Local  cloud  #3

IASM

II

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

27

IoT energy consumption

IoT devices may be battery powered Event orientation

Reduces cost of communication No streaming of IoT data to cloud

IoT data/info. to consumer on configured event Distributed data -> information computation Subscription to distributed information based on events Enabling receiver tailored information

28

Engineering of IoT automation systems System of systems, SoS, approach

Information provided as a configurable services Orchestration of services

Supported by complex event processing Choreography To be supported by the technology architecture

www.arrowhead.eu

29

How  to  build    local  cloud?  SOA  -‐  Abstracting  IoT  data  to  services

Services  are  produced  Services  are  consumed

Service Consumer

Service producer

Application service

IoT System A IoT System B

Exchange information

www.arrowhead.eu

30How  to  build    local  cloud?  Fundamental  conceptual  overview

all of its users to work in a common and unified approach – leading towards high levels of interoperability.

A. Overview of Arrowhead Framework The Arrowhead Framework includes principles on how to

design SOA-based systems, guidelines for its documentation and a software framework capable of supporting its implementations.

The design guidelines provide generic “black box” design patterns on how to implement application systems to be Arrowhead Framework compliant. Furthermore, these guidelines allow making legacy systems Arrowhead Framework compliant.

The documentation guidelines include templates for service, system and, system-of-systems descriptions (to be detailed in the following sections of this paper). Due to its complexity there is also a “Cookbook” for hands-on instructions on how to use the framework.

The software framework (Fig. 2) includes a set of Core Services which are capable of supporting the interaction between Application Services. The Core Services handle the support functionality within the Arrowhead Framework to enable Application Services to exchange information. Examples are services for Discovery, Authorization, Orchestration, and System Status. An Application Service handles the data exchange between specialized devices (those that the system is special at). Examples are services for sensor reading, billing, energy consumption, weather forecasts, etc.

The Core Services (Fig. 2) are further divided into three different groups: i) Information Infrastructure (II); ii) Systems Management (SM); and, iii) Information Assurance (IA).

The II services are the set of core services and systems in charge of providing information about the services and how to connect to them. This includes services like Service Discovery, Application Installation and Setup, Service Metadata, etc. The SM services are the set of core services and systems providing support for late binding and solving system-of-systems composition. The SM provides logging, monitoring and status functionality. It also addresses orchestration, software distribution, Quality of Service (QoS), configuration and policy. Finally, such a software framework can only operate if the system is able provide adequate security and safety levels. Those functions are assured by the IA services, supporting secure information exchange. Example services include those for authorization, authentication, certificate distribution, security logging and service intrusion.

The software framework also addresses the design and prototype implementations of gateways/mediators for making legacy systems Arrowhead compliant.

Finally, the Arrowhead Framework provides a set of rules and principles to: i) address technical property requirements; ii) Arrowhead conformity requirements and, iii) a set of tool(s) for conformity test and verification.

Fig. 2. Arrowhead Framework core and application services

B. The Arrowhead Framework documentation approach The Arrowhead Framework states a common approach of

how to document SOA-based systems. The documents structure is built on three levels, namely: System-of-Systems, System and Service level. These are depicted in Fig. 3, showing the links between documents, as well.

Fig. 3. The Arrowhead Framework documentation relationships

The approach is to apply the terms “black box” and “white box” only to the System level since it is well known what it means. However, these concepts are not used at the Service level, where such division is rather meant to be about technology independence/dependence.

At the System-of-Systems (SoS) level, a concrete “System-of-Systems type” is defined in the System-of-Systems Description (SoSD) document. Thus, the particular “system type” needed to fulfill our SoS goals can be implemented. The correct way of working is assured thanks to the “black box” representation of all Systems in the System Description (SysD). Therefore, each “system type” can talk to each other or identify the gateways/mediators’ needs.

In the System-of-Systems Design Description (SoSDD) a SoSD instance can be created. All the participating “white box” Systems (SysDD) must be enumerated and the entire setup must be explained, including infrastructure description (network configuration, VPNs, etc.), domain structure, startup behavior etc. This is a deployment description and it describes the SOA installations.

www.arrowhead.eu

31

Core  Functionalities  -‐    System-‐of-‐Systems  in  a  local  cloud

ARROWHEAD FRAMEWORK  COMPLIANT  NETWORK

IASMII

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

Core  systems

www.arrowhead.eu

32

AutomaKon  orchestraKon local  &  inter  cloud

Local  cloud  #1

IASM

II

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

Local  cloud  #2

IASM

II

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

Local  cloud  #3

IASM

II

Application  system

Application  system

Application  system

App

lication  

system

Application  system

Application  system

33

Three  mandatory  local  cloud  servicesService  registry  system  

Authorisation  system  

Orchestration  system

www.arrowhead.eu

34

Service  Registry•  supports  a  service  registry  functionality  based  on  DNS  and  DNS-‐SD.  

•  all  Systems  within  the  network  shall  publish  its  producing  service  within  the  Service  Registry  by  using  the  Service  Discovery  service

«CP» DNS-SD

«System»Service Registry

«CP» DNS-SD ServiceDiscovery

The  Service  Registry  system  consist  of  all  active  producing  services  within  the  network.

www.arrowhead.eu

35

Authorisation  System•  Authorisation  Management  service  provides  the  possibility  to  manage  the  access  rules  for  specific  resources.  

•  Authorisation  Control  service  provides  the  possibility  to  control  the  access  for  an  external  service  to  a  specific  resource.  

•  Service  Discovery  service  uses  the  Service  Discovery  to  publish  the  Authorisation  Systems  producing  services  within  the  Service  Registry  System.

«CP» WS-SOAP

«CP» REST_WS-TLS-XML

«CP» DNS-SD

«System»Authorisation System

«CP» WS-SOAP

«CP» REST_WS-TLS-XML

«CP» DNS-SD

AuthorisationManagement

AuthorisationControl

ServiceDiscovery

The  Authorisation  System  consists  of  access  rules  to  system  resources  (i.e.  services).

www.arrowhead.eu

36

Orchestration  System•  Orchestration  Management  service  provides  the  possibility  to  manage  the  connection  rules  for  specific  services.  

•  Orchestration  Store  service  provides  the  possibility  to  fetch  configuration  for  a  system.  

•  Service  Discovery  supports  the  publishing  of  the  Orchestration  Systems  producing  services  within  the  Service  Registry  System.

«CP» REST_WS-TLS-XML

«CP» REST_WS-XML

«CP» DNS-SD

«System»Orchestration System

«CP» REST_WS-TLS-XML

«CP» REST_WS-XML

«CP» DNS-SD

OrchestrationStore

OrchestrationManagement

ServiceDiscovery

The  Orchestration  System  provides  the  functionality  of  manage  connection  rules  (i.e.  orchestration  of  the  system  of  system  composition).

www.arrowhead.eu

37Startup  Application  System  B  and  establish  connection

www.arrowhead.eu

38

Automation  support  services

39

Arrowhead  core  systemsFactory  description  system  

Deployment  system  

Configuration  system  

Event  handler  system  

Historian  system  

Meta  service  registry  system  

User  registry  system  

Quality  of  Service  system

40

Factory  description  systemThe  purpose  of  the  Plant  description  system  is  to  provide  a  way  to  find  Arrowhead  devices  and  systems  through  browsable  structures  based  on  the  physical  systems  the  Arrowhead  devices  are  connected  to.    

The  first  specification  of  this  system  is  intended  as  a  basic  interface  to  present  hierarchies  and  basic  information  about  each  object.  It  is  intended  to  allow  a  user  to  find  objects,  physical  or  Arrowhead  systems,  based  on  either  their  physical  location  or  based  on  their  place  in  a  functional  context.    

www.arrowhead.eu

41

Configure  systemAs  the  devices  running  Arrowhead  compliant  systems  are  loosely  coupled  and  provided  by  different  suppliers  the  engineering  is  expected  to  move  to  open  or  independent  engineering  platforms  rather  than  those  provided  by  hardware  manufacturers.  The  Configuration  system  allows  the  configuration  of  systems  from  different  system  suppliers  through  a  uniform  service  interface.    

The  Configuration  system  is  designed  so  that  the  configuration  possibilities  are  not  limited  by  the  service  interface  but  allows  all  configurations  that  the  configurable  system  is  set  to  allow.    

«CP» DNS-SD

«CP» REST_WS-TLS-XML

«System»Configure

«CP» DNS-SD

«CP» REST_WS-TLS-XML

ServiceDiscovery

ConfigureStoreAuthorisationControlOrchestrationStore

www.arrowhead.eu

42

Deployment  SystemThe  purpose  of  the  Deployment  system  is  to  automatically  join  pre-‐assigned  new  devices  to  a  specific  Arrowhead  Framework  enabled  cloud  and  save  installation/engineering  time.      

The  idea  is  to  allow  an  administrator  of  the  local  cloud  to  set  conditions  under  which  a  factory  issued  identification  key  can  be  used  to  authenticate  certain  systems  to  allow  distribution  of  more  specific  keys  which  then  allows  a  system  to  connect  to  the  Arrowhead  framework  without  any  detailed  administration  of  the  specific  system.    

«CP» DNS-SD

«CP» REST_WS-TLS-XML

«System»Deployment

«CP» DNS-SD

«CP» REST_WS-TLS-XML

ServiceDiscovery

Deployment authenticationUserSystem Discovery

www.arrowhead.eu

43

Event  HandlerThe  Event  Handler  system  searches  and  connects  to  published  services  of  the  type  EventLog  in  the  ServiceRegistry.  

If  a  system  have  registered,  by  use  of    the  EventNofication  service,  to  listen  on  some  specific  type  of  event  or  system  that  log  events,  it  will  be  notified  of  the  specific  event  when  it  arrives  at  the  EventLog  service  interface.

«CP» DNS-SD

«CP» REST_WS-TLS-XML

«System»EventHandler

«CP» DNS-SD

«CP» REST_WS-TLS-XML

ServiceDiscovery

EventLogEventNotificationAuthorisationControl

www.arrowhead.eu

44

HistorianThe  Historian  is  used  for  storing  large  amounts  of  sensor  data,  as  well  as  distributing  messages  from  resource  constrained  devices  to  a  large  number  of  clients.  The  built-‐in  support  for  Arrowhead  Events  enables  the  Historian  service  to  log  events  and  act  as  an  intermediated  event  cache  for  device  to  device  or  service  to  service  interaction.  Thus  the  Historian  behaves  like  a  network  cash  for  data  from  resource  constrained  devices.

www.arrowhead.eu

45

Meta  Service  RegistryThe  Meta-‐Service  system  stores  additional  information  about  a  service  for  offline/later  access.    

This  system  is  a  support  system  for  the  service  registry  for  store  additional  information  such  as  constraint  information,  up-‐time,  or  other  specific  information  that  can  be  valuable  for  the  usage.

«CP» DNS-SD

«CP» REST_WS-TLS-XML

«System»Meta Service Registry

«CP» DNS-SD

«CP» REST_WS-TLS-XML

ServiceDiscovery

Meta-ServiceStore

www.arrowhead.eu

46

Arrowhead  Meta  Service  registryThe  Arrowhead  MSR  is  primarily  designed  to  work  with  resource-‐constrained  and  battery  powered  wireless  devices,  and  contains  metadata  about  services  and  devices,  such  as:  

• Battery  level,  renewable  energy  sources  

• Signal  strength,  network  topology,  current  access  point  

• Bandwidth  requirements  and  low-‐latency  real-‐time  communication  using  QoS  

• Uptime,  no  reboots,    

• Software  and  hardware  revision,  manufacturer  

• etc.

www.arrowhead.eu

47

User  /  System  Registry  systemThe  User-‐System  Registry  system  holds  unique  system  identities  for  deployed  systems  within  the  Arrowhead  network.

«CP» DNS-SD

«CP» REST_WS-TLS-XML

«System»UserSystem Repository

«CP» DNS-SD

«CP» REST_WS-TLS-XML

ServiceDiscovery

UserSystemDiscovery

48

Quality  of  ServiceThe  Quality  of  Service  (QoS)  approach  takes  care  of  handling  requests  from  Service  Consumers  in  order  to  guarantee  the  reservation  of  the  network  and/or  computational  resources  and  to  give  delivery  guarantees  to  the  communications  with  Service  Producers.

49

Migration  into/from  legacy  systems

Migration of SCADA/DCS Systems to the SOA CloudDelsing, J., Carlsson, O., Arrigucci, F., Bangemann, T., Hübner, C., Colombo, A. W., Nappey, P., Bony, B., Karnouskos, S., Nessaether, J. & Kyusakov, R. 2014 Industrial Cloud-Based Cyber-Physical Systems : The IMC-AESOP Approach. Springer, p. 111-135 25 p.

Experiments made Socardes and IMEC-AESOP projects

Boliden  2011  

Control  over  wireless  link  

Hydraulic  control  at  damm  in  Tampere  2013  

PLC  in  a  global  cloud

LKAB  2013  

SCADA  in  a  local    cloud

51Necessary  technology  for  large  automation  systems  in  the  cloudRobust  communication,  wired  or  wireless  

IoT  sensors,  actuators,  PLC:s,  etc.  

DCS  and  SCADA  functionality’  

MES  and  ERP  functionality  

Cloud  integration  technology  

Engineering  tools  for  cloud  automation  systems  

Test  tools  and  simulators  for  debugging  

Migration  of    cloud  automation  into  legacy  production  system    

Suitable  security  

52Engineering  tools  for  cloud  automation  systems  Development  support,  documentation.  

SoSD: System-of-Systems Description SoSDD: System of Systems Design Description SysD: System Description SysDD: System Design Description SD: Service Description IDD: Interface Design Description CP: Communication Profile SP: Semantic Profile

53Development  tools  System  Management  tool

54Service  security  IoT  and  cloud  securitySecurity  at  service  level  

Certificates  

Tickets  

Data  encryption  

IPsec  

TLS  

System  security  validation  methodologies

4. Authentication Process 121

AAA ServerCoAP NASPCuser_KEY

Login service new requestvalidatedValidated & Ticket

Service & Method & Ticketresponse

Service & Method & Ticketresponse

Ticket timeout

Authentication

Access Control

Authentication

Access Control

Figure 6: Authentication process

4.1 Authentication Method

On the authentication process the server must recognize the user as a valid user andcommunicate that to the CoAP-NAS. This process needs to be flexible and compatiblewith other standards and with this goal the propose framework creates a public loginCoAP service on the CoAP-NAS. This login service must receive a PUT request withone of the following contents as a payload:

• User name and password as plain text. This option is only recommended duringtesting, debugging and development phases.

• User name and password hash. This is easy to implement and could be authenti-cated directly on the CoAP server (without RADIUS).

• A RADIUS packet (future work).

The possibility to run RADIUS protocol over CoAP (see section 2.4) gives to theframework a flexible authentication method usable with a standard RADIUS server.

An Authentication and Access Control Framework for CoAP-based Internet of Things,Punal, P., Eliasson, J. & Delsing, J. 2015 IECON 2014: Dallas, TX, USA , Oct. 29 2014 - Nov. 1 2014. p. 5293-5299

55Test  tools  for  cloud  automation.

56

Automation  engineering  timeAutomation  is  a  service  based  on  products  

Simplicity  of  automation  service  engineering  is  market  key  

Arrowhead  Framework  reduces  engineering  time  

From    5-‐6  days  -‐>  6-‐8  hours  (Abelko)

57

Can  we  build  Arrowhead  automation  systems  today?  Robust  communication  

IoT  sensors,  actuators,  PLC:s,  etc.  

DCS  and  SCADA  functionality  

MES  and  ERP  functionality  

Cloud  integration  technology  

Engineering  tools  cloud  automation    

Test  tools  and  simulators  

Migration  to  cloud  automation  

Suitable  security  

➡Products  on  the  market  ➡Some  products  on  the  market  ➡First  products  on  the  market  ➡Demonstrated  in  industrial  env.  ➡Some  products  on  the  market  ➡Demonstrated  in  industrial  env.  ➡First  products  on  the  market  ➡Demonstrated  in  industrial  env.  ➡First  products  on  the  market

www.arrowhead.eu

58

Renewable  -‐  PV  at  building  roof  Recovery  from  lift  operation  Grid  supply  Use  of  3  shared  services:  energy  tariffs,  prediction,  energy  planning  Energy  savings  up  to  65%

Lift  micro  grids

www.arrowhead.eu

59

Use  of  prediction  service  enables  flexibility  in  energy  demand  Energy  savings  15%

Water  distribution  grid

www.arrowhead.eu

60

Load  balancing  -‐    Luleå  SwedenAdaptive  control  curve  service    

Load  balancing  of  individual  building  peek  energy  demands  service  

Multi  site  optimisation  service  

Interacting  with  load  balancing  and  the  adaptive  control  curve    

Stena  (housing  company)  claims  5%  savings  in  energy  usage.

61

Arrowhead  FrameworkPublic  by  fall  2015

   

Documentation  

Cookbook    

Support  wiki  

Core  system  code  

Tools  -‐Open  source  and  commercial    

Sample  automation  services  -‐  code

www.arrowhead.eu

62

Critical  platform  technologiesSecurity  -‐  scalable  and  flexible  security  solutions    

Latency  -‐  how  provide  "clouds"  with  latency  “guarantees"  

Dynamics/Continuous  -‐  engineering,  configuration  and  deployment  

Scalability  -‐  for  massive  numbers  of  resource  constrained  IoT  and  CPS  devices  

63

Critical  system  propertiesTrust  in  cloud  automation  systems

Real  life  -‐  at  scale  -‐  demonstrators  enables    

Standards,    

Society  and  political  acceptance

64

ConclusionsVery  large  scale  IoT  system  of  systems  is  desired  

Critical  automation  trust  requires    

Latency  control  and    Security    

Scalability  

Ease  of  continuous  engineering  

Solutions  enabling  dynamic  automation  systems:      

Design  and  Engineering  

Deployment,  Operation  and  Maintenance  

www.arrowhead.eu

Arrowhead.eu  an    Artemis  and  ProcessIT.EU  project  

[email protected]

65