Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-1
TABLE OF CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Quick Spec Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Elevations: 1/4” Scale
Single-Hung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Single-Hung - Florida Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Grille Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Section Details: 6” Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Installation Wall Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
Builders Aluminum
Single-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-2
PRODUCT SPECIFICATIONS
MATERIALS
White and MB-40 bronze electrostatically applied baked polyesterpaint.
FRAME
All frames are assembled with a silicone-injected corner key for addedstrength and durability. The frame jamb width is 2-11/16” (68.25 mm),and the nominal extrusion exterior wall thickness is 0.063”. Theframe incorporates a 1/2” front flange for typical Florida installationsinto block construction. Weep holes are included on the frame toensure standing water is directed to the exterior plane of the unit.Optional frame types: slip-on nailing fin.
SASH
The single hung sash is a nominal 1-1/4” (31.75mm) thickness. It ismechanically fastened for added strength and durability, and siliconesealed to ensure weathertight performance.
GLAZING
3/4” (19mm) insulated glass consists of two lites of glass sealed arounda spacer. 1/8” (3mm) and 3/16” (5mm) monolithic glazing. The glassis mounted into the sash using a silicone-glazing compound. Theinsulating glass units comply with the performance requirements ofthe IGCC in accordance with either ASTM E774 or E2190. All units areexterior glazed.
GLAZING OPTIONS
3/4” (19mm) insulated glass is available in clear, Low-E or Low-E 366,tinted, obscure or other specialty insulating glass as specified. 1/8”(3mm) and 3/16” (5mm) monolithic glazing. Many glass options areavailable in tempered glazing or monolithic glass.
WEATHER-STRIPPING
A fin-pile weather-strip is applied along the full perimeter of theoperating sash and meeting rail.
HARDWARE
A single action cam style lock is available on all windows. Block andTackle balance systems are utilized to support the vertical operationof the sash.
INSECT SCREENS
The exterior fiberglass charcoal color insect screen is set in analuminum frame to match the color of the unit. The spring loadedscreen system assists in keeping it secured to the window. Insectscreens are intended to allow air and light in and keep insects out.They are not intended to keep anyone or anything from fallingthrough an open door or window. For safety screens or other securitydevices contact your local building supply retailer.
GRILLES
GBG (Grilles between the Glass) - 5/8” (16mm) and 7/8” (22.2mm) flator 5/8” (16mm) contour grilles mounted between the glass panessuspended within the air cavity and color matched to the extrusioncolor.
DA (Double Applied) - Aluminum 7/8” double applied flat/flat bar isapplied to the exterior of the single glazed glass to give the detail ofa true divided look.
ADDITIONAL ACCESSORIES
Please contact your local building supply retailer for a completelisting of the additional accessories. See www.jeld-wen.com/findsupplier.
INSTALLATION
See www.jeld-wen.com/resources for instructions.
PERFORMANCE
Please reference www.jeld-wen.com/performanceratings for up todate Design Pressure and approval information.
Single-Hung Windows
Builders Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-3
QUICK SPEC GUIDE
SPECIFICATION STANDARD FEATURESOPTIONAL FEATURES
Some options may require additional lead times.Consult your JELD-WEN Sales Representative.
COLOR S WhiteS Bronze
SIZE S Width: 17” - 52-1/8”S Height: 12” - 75”
FRAME S Front Flange S Slip-On Fin
GLAZING S Single-Glaze Clear S 3/4” Clear InsulatedS 3/4” Low-E InsulatedS BronzeS GrayS GreenS ObscureS AzurliteS Graylite (Turtle)
All glass available tempered
HARDWARE S Cam-Lock
HARDWARE COLOR S Color matched to extrusion
SCREENS S Fiberglass
SCREEN FRAME COLOR S Color matched to extrusion
GRILLES S Double Applied Flat/Flat Bar (single-glaze only)S 5/8”, 7/8” Flat GBGS 5/8” Contour
JAMB S 2-11/16”
Single-Hung Windows
Builders Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-4
ELEVATION SYMBOL LEGEND:##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
14 19/32”17”
17 1/2”18”
4SH1830
111/
64”
121/
8”29
”29
1/2”
30”
12 41/64”
4SH2430 4SH2630 4SH3030 4SH3230 4SH3430 4SH3630 4SH4230
4SH1836 4SH2436 4SH2636 4SH3036 4SH3236 4SH3436 4SH3636 4SH4236
4SH1842 4SH2442 4SH2642 4SH3042 4SH3242 4SH3442 4SH3642 4SH4242
4SH1848 4SH2448 4SH2648 4SH3048 4SH3248 4SH3448 4SH3648 4SH4248
4SH1854 4SH2454 4SH2654 4SH3054 4SH3254 4SH3454 4SH3654 4SH4254
4SH1860 4SH2460 4SH2660 4SH3060 4SH3260 4SH3460 4SH3660 4SH4260
20 19/32”23”
23 1/2”24”
18 41/64”22 19/32”
25”25 1/2”
26”
20 41/64”26 19/32”
29”29 1/2”
30”
24 41/64”28 19/32”
31”31 1/2”
32”
26 41/64”30 19/32”
33”33 1/2”
34”
28 41/64”32 19/32”
35”35 1/2”
36”
30 41/64”38 19/32”
41”4117 1/2”
42”
36 41/64”
141/
64”
151/
8”35
”35
1/2”
36”
171/
64”
181/
8”41
”41
1/2”
42”
201/
64”
211/
8”47
”47
1/2”
48”
231/
64”
241/
8”53
”53
1/2”
54”
261/
64”
271/
8”59
”59
1/2”
60”
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
SINGLE-HUNG
Builders Aluminum
SCALE: 1/4” = 1’
Single-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-5
SINGLE-HUNG
4SH1866 4SH2466 4SH2666 4SH3066 4SH3266 4SH3466 4SH3666 4SH4266
4SH1872 4SH2472 4SH2672 4SH3072 4SH3272 4SH3472 4SH3672 4SH4272
4SH1876 4SH2476 4SH2676 4SH3076 4SH3276 4SH3476 4SH3676 4SH4276
291/
64”
301/
8”65
”65
1/2”
66”
321/
64”
331/
8”71
”71
1/2”
72”
341/
64”
351/
8”75
”75
1/2”
76”
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
20* 20* 20* 20* 20*20* 20* 20*
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
14 19/32”17”
17 1/2”18”
12 41/64”20 19/32”
23”23 1/2”
24”
18 41/64”22 19/32”
25”25 1/2”
26”
20 41/64”26 19/32”
29”29 1/2”
30”
24 41/64”28 19/32”
31”31 1/2”
32”
26 41/64”30 19/32”
33”33 1/2”
34”
28 41/64”32 19/32”
35”35 1/2”
36”
30 41/64”38 19/32”
41”4117 1/2”
42”
36 41/64”
EEE
EEE
EEE
ELEVATION SYMBOL LEGEND:##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.
CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Builders Aluminum
SCALE: 1/4” = 1’
Single-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-6
SINGLE-HUNG
ELEVATION SYMBOL LEGEND:##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.
4SH4830 4SH5330
4SH4836 4SH5336
4SH4842 4SH5342
4SH4848 4SH5348
4SH4854 4SH5354
4SH4860 4SH5360
4SH4866 4SH5366
44 19/32”47”
47 1/2”48”
42 41/64”49 19/32”
52”52 1/2”
53”
47 41/64”
20*
20*
20*
20*
20*
20*
20*
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
111/
64”
121/
8”29
”29
1/2”
30”
141/
64”
151/
8”35
”35
1/2”
36”
171/
64”
181/
8”41
”41
1/2”
42”
201/
64”
211/
8”47
”47
1/2”
48”
231/
64”
241/
8”53
”53
1/2”
54”
261/
64”
271/
8”59
”59
1/2”
60”
291/
64”
301/
8”65
”65
1/2”
66”
EE
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Builders Aluminum
SCALE: 1/4” = 1’
Single-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-7
SINGLE-HUNG
4SH4872 4SH5372
4SH4876 4SH5376
20*
20*
44 19/32”47”
47 1/2”48”
42 41/64”49 19/32”
52”52 1/2”
53”
47 41/64”DAYLIGHT OPENING
FRAME SIZEROUGH OPENING
UNIT SIZE
321/
64”
331/
8”71
”71
1/2”
72”
341/
64”
351/
8”75
”75
1/2”
76”
EE
EE
ELEVATION SYMBOL LEGEND:##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.
CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Builders Aluminum
SCALE: 1/4” = 1’
Single-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-8
SINGLE-HUNG - FLORIDA SIZES
ELEVATION SYMBOL LEGEND:
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
91/
64”
101/
8”25
”25
1/2”
26”
15 23/32”18 1/8”18 5/8”19 1/8”
13 49/64”23 3/32”25 1/2”
26”26 1/2”
21 9/64”33 19/32”
36”36 1/2”
37”
31 41/64”49 23/32”52 1/8”52 5/8”53 1/8”
47 49/64”
4SH-12 4SH-H32 4SH-22 4SH-32
4SH-13 4SH-H33 4SH-23 4SH-33
4SH-14 4SH-H34 4SH-249E 4SH-349E
4SH-15 4SH-H35 4SH-25 4SH-35
4SH-16S 4SH-H36S 4SH-26 4SH-36
4SH-16 4SH-H36 4SH-26 4SH-36
1513
/64”
165/
16”
373/
8”37
7/8”
383/
8”
2121
/64”
227/
16”
495/
8”50
1/8”
505/
8”
2733
/64”
285/
8”62
”62
1/2”
63”
321/
64”
331/
8”71
”71
1/2”
72”
341/
64”
351/
8”75
”75
1/2”
76”
EE
EE
EE
Builders Aluminum
SCALE: 1/4” = 1’
Single-Hung Windows
JELD-WEN reserves the right to change specifications without notice. Page 1-9Architectural Detail ManualJanuary 2009
STANDARD PRAIRIE PRAIRIE SASH
COLONIAL TOP SASH1/2 LITE
COLONIAL TOP SASH
GRILLE PATTERNS
Builders Aluminum
Single-Hung Windows
JELD-WEN reserves the right to change specifications without notice. Page 1-10Architectural Detail ManualJanuary 2009
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
1/2”
Gla
ssSi
ze
Day
light
Ope
ning
Uni
tSi
ze
Scre
enSi
ze
2 11/16”
5/8”
1 15/16”
1 3/16”
1/2”
1/2”
1 1/16”
2 11/16”
5/8”
1 15/16”
13/16”
1”
1/2”
1/2”
1”
VERTICAL SECTION
SINGLE-HUNGFLANGE
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-11Architectural Detail ManualJanuary 2009
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
Glass Size
Daylight Opening
Unit Size
HORIZONTAL SECTION
1/4” 1/4”
5/8”
1 15/16”
2 11/16”
5/8”
1 15/16”
15/16”
11/16”
1/2” 1/2”
11/16”
15/16”
1/2”
1 3/16”1 3/16”
1/2”
2 11/16”
SINGLE-HUNGFLANGE
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-12Architectural Detail ManualJanuary 2009
VERTICAL SECTION
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Uni
tSi
ze
Scre
enSi
ze
1/2”
2 11/16”
1 5/16”1 5/16”
2 11/16”
1 5/16”1 5/16”1 1/4”
1 7/16”
1”
1/2”
1/2”
1”
1/2”
1/2”
1/2”
SINGLE-HUNGNAIL FIN
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-13Architectural Detail ManualJanuary 2009
1 5/16”
1 5/16”
2 11/16”
1 5/16”
1 5/16”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
1/4” 1/4”
1/2”
Glass Size
Daylight Opening
Unit Size
HORIZONTAL SECTION
1/2”
15/16”15/16”
1/2”
1/2”
11/16”
5/8”
11/16”
5/8”
2 11/16”
SINGLE-HUNGNAIL FIN
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-14Architectural Detail ManualJanuary 2009
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
1/2”
Gla
ssSi
ze
Day
light
Ope
ning
Uni
tSi
ze
Scre
enSi
ze1 3/16”
1/2”
1/2”
1 1/16”
13/16”
1”
1/2”
1/2”
1”
VERTICAL SECTION
2 11/16”
1 7/8”
13/16”
2 11/16”
1 7/8”
13/16”
SINGLE-HUNGSLIP ON NAIL FIN
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-15Architectural Detail ManualJanuary 2009
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
Glass Size
Daylight Opening
Unit Size
HORIZONTAL SECTION
1/4” 1/4”
15/16”
11/16”
1/2” 1/2”
11/16”
15/16”
1/2”
1 3/16”1 3/16”
1/2”
13/16”
1 7/8”
2 11/16”
13/16”
1 7/8”
2 11/16”
SINGLE-HUNGSLIP ON NAIL FIN
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-16Architectural Detail ManualJanuary 2009
Sash Size
Glass Size
Daylight Opening
1/4”
15/16”
11/16”
1/2” 1/2”
11/16”
15/16” 15/16”
11/16”
1/2”
Glass Size
Daylight Opening
HORIZONTAL SECTION
1/2”
1 3/16”
1/2” 1/2”
2 11/16”
5/8”
1 15/16”
Daylight Opening
Glass Size
Unit Size
Daylight Opening
Glass Size
Sash Size
Rough Opening
Frame Size
SINGLE-HUNG - 3-WIDEFLANGE
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-17Architectural Detail ManualJanuary 2009
Sash Size
Glass Size
Daylight Opening
1/4”
5/8”
11/16”
1/2” 1/2”
11/16”
15/16” 15/16”
11/16”
1/2”
Glass Size
Daylight Opening
HORIZONTAL SECTION
1/2”
1 7/16”
1/2” 1/2”
2 11/16”
1 5/16”
1 5/16”
Daylight Opening
Glass Size
Sash Size
Rough Opening
Frame Size
Daylight Opening
Glass Size
Unit Size
SINGLE-HUNG - 3-WIDENAIL FIN
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-18Architectural Detail ManualJanuary 2009
Sash Size
Glass Size
Daylight Opening
1/4”
15/16”
11/16”
1/2” 1/2”
11/16”
15/16” 15/16”
11/16”
1/2”
Glass Size
Daylight Opening
HORIZONTAL SECTION
1/2”
1 15/16”
1/2” 1/2”
Daylight Opening
Glass Size
Unit Size
Daylight Opening
Glass Size
Sash Size
Rough Opening
Frame Size
2 11/16”
13/16”
1 7/8”
SINGLE-HUNG - 3-WIDESLIP ON NAIL FIN
Builders Aluminum
Single-Hung Windows
SCALE: 6” = 1’
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-19
Fram
eSi
zeRo
ugh
Ope
ning
1/4”
1/4”
Frame SizeRough Opening
7° MIN. SLOPE
DRAIN MAT, TO TERMINATE OVERCONTINUOUS MOISTURE BARRIER(WEATHER PLANE OF BUILDING)BY OTHERS
LOW EXPANSIONFOAM BY OTHERS
WINDOW SECURED WITHANGLE BRACKET BY OTHERS
LOW PRESSURE FOAMBY OTHERS
WOOD TRIM BYOTHERS
Details shown are for representation only and intended to reflect basicinstallation concepts. Proper installation and maintenance of JELD-WENproducts are essential if optimum performance is to be fully attained. Writteninstallation instructions that provide guidelines are available on our websiteat www.jeld-wen.com/resources.
Doors and windows to be installed per latestrevision of ASTM E2112. STANDARD PRACTICEFOR INSTALLATION OF EXTERIOR WINDOWS,DOORS AND SKYLIGHTS.
Weather plane flashing must provide a continuousseal between weather plane of fenestration productand weather plane of wall system.
All metal to metal joints must be sealed afterinstallation, this includes, but is not limited to dripcaps and mullion covers.
Job site ”Frame to Frame” Mull joints must besilicon sealed between frames.
JELD-WEN recommends all window products beinstalled with a sill pan or equivalent must includeback dam and side dams @ 7/8”.
INSTALLATION:
1/4” 1/4”
SEALANT & BACKERROD BY OTHERS
SEALANT AND BACKER RODBY OTHERS
SEALANT AND BACKER RODBY OTHERS
VERTICAL SECTION
HORIZONTAL SECTION
NOTE: Please refer to the JELD-WEN web site forinstallation instructions at: www.jeld-wen.com
INSTALLATION WALL DETAILCMU
Single-Hung Windows
Builders Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-20
Fram
eSi
zeRo
ugh
Ope
ning
1/4”
1/4”
LOW EXPANSIONFOAM BY OTHERS
LOW PRESSURE FOAMBY OTHERS
Details shown are for representation only and intended to reflect basicinstallation concepts. Proper installation and maintenance of JELD-WENproducts are essential if optimum performance is to be fully attained. Writteninstallation instructions that provide guidelines are available on our websiteat www.jeld-wen.com/resources.
VERTICAL SECTION
HORIZONTAL SECTION
Doors and windows to be installed per latestrevision of ASTM E2112. STANDARD PRACTICEFOR INSTALLATION OF EXTERIOR WINDOWS,DOORS AND SKYLIGHTS.
Weather plane flashing must provide a continuousseal between weather plane of fenestration productand weather plane of wall system.
All metal to metal joints must be sealed afterinstallation, this includes, but is not limited to dripcaps and mullion covers.
Job site ”Frame to Frame” Mull joints must besilicon sealed between frames.
JELD-WEN recommends all window products beinstalled with a sill pan or equivalent must includeback dam and side dams @ 7/8”.
INSTALLATION:
SEALANT BY OTHERS
CONTINUOUSMOISTURE BARRIERBY OTHERS
CONTINUOUSSEALANT BEHIND NAILFIN, ALL SIDES, BYOTHERS
SELF-ADHESIVEFLASHING OVER NAILFLANGE BY OTHERS
WOOD SILL AND TRIMBY OTHERSTHRU WALL FLASHING
BY OTHERS
CONTINUOUS BEADOF SEALANTBETWEEN NAIL FINAND DRAIN MAT
CONTINUOUSMOISTURE BARRIERBY OTHERS
Frame SizeRough Opening
1/4” 1/4”
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
SEALANT & BACKERROD BY OTHERS
NOTE: Please refer to the JELD-WEN web site forinstallation instructions at: www.jeld-wen.com
DRAIN MAT, TO TERMINATE OVERCONTINUOUS MOISTURE BARRIER(WEATHER PLANE OF BUILDING)BY OTHERS
INSTALLATION WALL DETAILLAP SIDING
Single-Hung Windows
Builders Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-21
Fram
eSi
zeRo
ugh
Ope
ning
1/4”
1/4”
LOW PRESSURE FOAMBY OTHERS
Details shown are for representation only and intended to reflect basicinstallation concepts. Proper installation and maintenance of JELD-WENproducts are essential if optimum performance is to be fully attained. Writteninstallation instructions that provide guidelines are available on our websiteat www.jeld-wen.com/resources.
VERTICAL SECTION
HORIZONTAL SECTION
Doors and windows to be installed per latestrevision of ASTM E2112. STANDARD PRACTICEFOR INSTALLATION OF EXTERIOR WINDOWS,DOORS AND SKYLIGHTS.
Weather plane flashing must provide a continuousseal between weather plane of fenestration productand weather plane of wall system.
All metal to metal joints must be sealed afterinstallation, this includes, but is not limited to dripcaps and mullion covers.
Job site ”Frame to Frame” Mull joints must besilicon sealed between frames.
JELD-WEN recommends all window products beinstalled with a sill pan or equivalent must includeback dam and side dams @ 7/8”.
INSTALLATION:
WOOD SILL AND TRIMBY OTHERS
Frame SizeRough Opening
1/4” 1/4”
CONTINUOUSMOISTURE BARRIERBY OTHERS
CONTINUOUSSEALANT BEHIND NAILFIN, ALL SIDES, BYOTHERS
SELF-ADHESIVEFLASHING OVER NAILFLANGE BY OTHERS
LOW EXPANSIONFOAM BY OTHERS
CONTINUOUS BEADOF SEALANTBETWEEN NAIL FINAND DRAIN MAT
CONTINUOUSMOISTURE BARRIERBY OTHERS
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
CONTINUOUS SEALANT AND BACKERROD BY OTHERS
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
NOTE: Please refer to the JELD-WEN web site forinstallation instructions at: www.jeld-wen.com
DRAIN MAT, TO TERMINATE OVERCONTINUOUS MOISTURE BARRIER(WEATHER PLANE OF BUILDING)BY OTHERS
INSTALLATION WALL DETAILSTUCCO
Single-Hung Windows
Builders Aluminum