1

BUFFALO TURBINE LLC 180 Zoar Road

Springville, NY 14141 TEL: 716 592 2700 FAX: 716 592 2460

EMAIL: info@buffaloturbine.com www.buffaloturbine.com

BUFFALO TURBINE'S SANDEVIL™ ATTACHMENT ASSEMBLY INSTRUCTIONS

OPERATOR'S MANUAL AND PARTS BOOK 06/06 MAN

POSITION THE ADJUSTMENT LEVER TO ACHIEVE BEST RESULTS WHEN FILLING HOLES, MINIMAL BRISTLE CONTACT WITH THE TURF IS RECOMMENDED

HEIGHT ADJUSTMENT LEVER

SANDEVILASSEMBLY INSTRUCTIONS BEGIN ON PAGE 14

2

BUFFALO TURBINE SANDEVIL ATTACHMENT WARRANTY REGISTRATION FORM & INSPECTION REPORT Any units not registered with Buffalo Turbine are not eligible for warranty claims WARRANTY REGISTRATION / BT – SD06 This form must be filled out by the dealer and signed by both the dealer and the customer at the time of delivery Customer's Name _______________________ Dealer’s Name __________________________ Address _______________________ Address __________________________ City, State, Zip, Country ____________________ City, State, Zip, Country______________________ Email Address (important) ___________________ Email Address ____________________________ Telephone Number _______________________ SANDEVIL ATTACHMENT Circle one: Serial Number _______________________ Golf Sports Fields Private Use Delivery Date _______________________ DEALER INSPECTION REPORT SAFETY CHECKS _______ 10 Shots of grease each fitting ________ All Decals Installed

_________ (3)Caster Wheel Assemblies installed ________ Review Operating and _________ (2) Anti-scalping rollers installed Safety Instructions

_________ Lubricate Machine ________ Guards in Place

_________ Fasteners Tight

_________ Linkage mounted per instruction _________ Lynch pin and washer I have thoroughly instructed the buyer on the above described equipment which review the included Operator's Manual content, equipment care, adjustments, safe operation and applicable warranty policy. Date __________________ Dealer's Rep. Signature ____________________________ The above equipment and Operator's Manual has been received by me and I have been thoroughly instructed as to the care, adjustments, safe operation and applicable warranty policy. Date __________________ Owner's Signature _________________________________ PLEASE FAX A COPY TO BUFFALO TURBINE AT 716 592 2460

3

SERIAL NUMBER LOCATION

Always give your dealer the serial number of your Debris Blower when ordering parts or requesting service or other information. The serial number plate(s) is located where indicated in the pictures below. Please document the number in the space provided for easy reference.

THE DIRECTION OF TRAVEL (side arrows) DETERMINES THE FRONT OR REAR OF SANDEVIL UNIT

SANDEVIL™ Serial Number _______________

Serial # tag location

WHEN FILLING AERIFICATION HOLES, POSITION THE HEIGHT ADJUSTMENT LEVER TO THE STTING WHERE THE NYLON BRISTLES ARE JUST TOUCHING (OR SLIGHTLY ABOVE) THE PUTTING GREEN SURFACE. POSITIONING THE SANDEVIL UNIT TO ITS LOWEST SETTING WILL REDUCE OR STARVE THE AIR FLOW PRODUCED FROM THE TURBINE BLOWER TO THE SANDEVIL ATTACHMENT.

HEIGHT ADJUSTMENT LEVER

EXCESSIVE SPEED ON PAVED SURFACES WILL DAMAGE CASTER WHEELS

4

BUFFALO TURBINE’S SANDEVIL™ ATTACHMENT WARRANTY Buffalo Turbine LLC, Inc. warrants the SANDEVIL™ to be free from defects in material and workmanship, under normal use and service. Obligation under this warranty shall extend for a period of 1 year (12 months) and shall be limited to, at the option of Buffalo Turbine, replacement of any parts found, upon inspection by Buffalo Turbine, to be defective. Buffalo Turbine reserves the right to incorporate improvements in material and design of its products without notice and is not obligated to make the same improvements to equipment previously manufactured. WARRANTY CLAIMS The purchaser claiming under this warranty shall submit a warranty claim in the prescribed form to Buffalo Turbine or an Authorized Dealer, for inspection by an authorized company representative. Factory ordered Buffalo Turbine parts must be used when filing a warranty claim. LIMITATIONS OF LIABILITY This warranty is expressly in lieu of all other warranties expressed or implied and all other obligations or liabilities on our part of any kind or character, including liabilities for alleged representations or negligence. We neither assume nor authorize any other person to assume on our behalf, any liability in connection with the subsequent sale of the SANDEVIL ATTACHMENT. This warranty shall not apply to any SANDEVIL ATTACMENT, which has been altered outside the factory in any way so as, in the judgement of Buffalo Turbine, to affect its operation or reliability, or which has been subject to misuse, neglect, or accident. This warranty does not cover parts and accessories, which are under separate guarantee from the manufacturers and service can be, obtained form their service facilities. No warranty is extended to regular service items such as lubricants, belts, flexible hose, tires, paint and the like. OPERATION MANUAL The Purchaser acknowledges having receiving training in the safe operation of the SANDEVIL ATTACHMENT and further acknowledges that Buffalo Turbine does not assume any liability resulting from the operation of the SANDEVIL in any manner other than described in the Operator’s Manual supplied at the time of purchase.

WARRANTY VOID IF NOT RESGISTERED If there are any questions regarding any of our products call Buffalo Turbine at 716 592 2700. APPLY 10 SHOTS OF GREASE TO EACH FITTING BEFORE OPERATING.

DO NOT STORE, BLOCK OR SERVICE UNIT WHILE RESTING ON NYLON BRISTLES. BRISTLES SHOULD CONTACT NATURAL AND ARTIFICIAL GRASS SURFACES ONLY.

DO NOT DRAG BRISTLES ON PAVED OR STONE SURFACES. ALWAYS RAISE THE SANDEVIL ATTACHMENT LEVER WHEN TRAVELING TO WORK LOCATION Excessive ground speed on paved surfaces will cause premature damage to the caster wheels

Unauthorized service work on the Turbine Blower will null and void all warranties.

5

1. INTRODUCTION Congratulations on your choice of the Buffalo Turbine SANDEVIL attachment. This attachment has been designed and manufactured to meet the needs of a discerning Turf Care Industry. Safe, efficient and trouble-free operation of your Buffalo Turbine SANDEVIL requires that you and anyone else who will be operating or maintaining the Blower, read and understand all of the safety, operation, maintenance and trouble shooting information contained within this Operator’s manual. This Manual covers the SANDEVIL attachment only. Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your Buffalo Turbine dealer or distributor if you need assistance, information, or additional copies of the manuals. OPERATOR ORIENTATION – The directions left, right, front and rear, as mentioned throughout this manual, are as seen from the driver’s seat and facing in the direction of travel.

THE SANDEVIL ATTACHES DIRECTLY TO THE BUFFALO TURBINE MODEL KB BLOWER UNIT. FOLLOW ALL SAFETY GUIDE LINES DESCRIBED IN BOTH THE SANDEVIL MANUAL AND THE MODEL KB BLOWER MANUAL.

6

2 SAFETY SAFETY ALERT SYMBOL

This safety Alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! The Safety Alert symbol identifies important safety messages on the Buffalo Turbine Blower and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety message. SIGNAL WORDS: Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal word for each message has been selected using the following guidelines: 1. DANGER – An immediate and specific hazard that WILL result in severe personal

injury or death if the proper precautions are not taken. 2. WARNING -- A specific hazard or unsafe practice that COULD result in severe personal injury or death if proper

precautions are not taken. 3. CAUTION – Unsafe practices that COULD result in personal injury if proper practices are not taken, or as a

reminder of good safety. 2. SAFETY

YOU are responsible for the SAFE operation and maintenance of your Buffalo Turbine Debris Blower. YOU must ensure that you and anyone else who is going to operate, maintain or work around the Buffalo Turbine Blower be familiar with the operating and maintenance procedures and related SAFETY information contained in this manual. This manual will take you step-by-step through your working day and alerts you to all good safety practice while operating the Blower. Remember YOU are the key to safety. Good safety practices not only protect you but also the people around you. Make these practices a working part of your safety program. Be certain that EVERYONE operating this machine is familiar with the procedures recommended and follows safety precautions. Remember most accidents can be prevented. Do not risk injury or death by ignoring good safety practices. • Blower owners must give operating

instructions to operators or employees before allowing them to operate the Blower, and at least annually thereafter.

• The most important safety device on this

equipment is a SAFE operator. It is the operator’s responsibility to read and understand ALL Safety and Operating instructions in the manual and to follow these. All accidents can be avoided.

• A person who has not read and understood

all operating instructions is not qualified to operate the machine. An untrained operator exposes themselves and bystanders to possible serious injury or death.

• Do not modify the equipment in any way.

Unauthorized modification may impair the function and/or safety, which could affect the life of the equipment.

• Think SAFETY! Work SAFELY!

Why is SAFETY important to you? 3 Big Reasons: Accidents Disable and Kill Accidents Cost Accidents Can Be Avoided

7

2.1 GENERAL SAFETY 1. Read and understand the Operator’s Manual

and all safety signs before operating, maintaining, and adjusting.

2. Provide a first-aid kit for use in case of an

accident. Store in a highly visible place. 3. Provide a fire extinguisher for use in case of

an accident. Store in a highly visible place. 4. Wear appropriate protective gear. This list

includes but is not limited to:

• A hard hat • Protective shoes with slip

resistant soles • Protective glasses or goggles • Heavy gloves • Wet weather gear • Hearing protection

5. Do not operate without guards or shields

properly installed. 6. Do not allow riders. 7. Wear appropriate ear protection for

prolonged exposure to excessive noise. 8. (All Models) Set Blower on the ground,

disengage PTO, stop engine, set park brake, remove ignition key and wait for all moving parts to stop before dismounting to service, adjust or ATTACH THE SANDEVIL .

9. Clear the area of people, especially small

children, before starting the unit. 10. Review all safety related items annually

with all personnel who will be operating or maintaining the SANDEVIL and Blower.

11. Keep hands, feet, hair and clothing away

from moving parts. 12. Operate equipment only while seated in the

operator’s seat.

2.2 OPERATING SAFETY 1. Read and understand the Operator’s Manual

and all safety signs before operating, servicing or adjusting the SANDEVIL attachment and Model KB Blower.

2. Before servicing, repairing or installing the

SANDEVIL attachment to the Model KB2 Series, Turn Off Engine, remove key and Disconnect Battery Terminals.

MAINTENANCE SAFETY 1. Read and follow ALL general, operating,

maintenance and safety information in this manual.

2. Support the machine with blocks or safety

stands when changing tires or working beneath it.

3. (All Models) Set Blower on the ground,

disengage PTO, stop engine, set park brake, remove ignition key and wait for all moving parts to stop before operating, servicing or adjusting.

4. Do not adjust the drive belt when it is

rotating. 5. Make sure all guards are in place and

properly secured when operating or maintaining the SANDEVIL and Blower unit.

2.4 TRANSPORT SAFETY 1. Make sure you are in compliant with all

local DOT regulations regarding transporting Buffalo Turbine equipment on public roads and highways. DOT APPROVED TRAILERS ARE AVAILABLE FROM BUFFALO TURBINE.

8

2.8 SIGN-OFF FORM

Buffalo Turbine recommends that anyone who will be operating and/or maintaining the Buffalo Turbine SANDEVIL and Blower units must read and clearly understand ALL Safety, Operating and Maintenance information presented in this manual. Do not operate or allow anyone else to operate this equipment until such information has been reviewed. Annually review this information before the season start-up. Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your equipment. We feel that an untrained operator is unqualified to operate this machine. A sign-off sheet is provided for your record keeping to show that all personnel who will be working with the equipment have read and understand the information in the Operator’s Manual and have been instructed in the operation of the equipment.

SIGN-OFF FORM DATE EMPLOYEES SIGNATURE EMPLOYERS SIGNATURE

9

SERVICE 5.4.1 FLUIDS & MAINTENANCE Grease (SANDEVIL) Use SAE multi-purpose high temperature grease for all applications. SAE multi- purpose lithium base grease is also acceptable.

USE ONLY CLEAN LUBRICANTS 5.6 Servicing Interval

The SANDEVIL requires approximately 10 shots of grease to each fitting upon the completion of the set up. 1. DO NOT OVER GREASE

TOP VIEW (6) 2” HOLES IN BAFFLE PLATE

10

5.7 SERVICE RECORD See Lubrication and Maintenance sections for details of service. Copy this page to continue record. TURN OFF, REMOVE KEY & DISCONNECT BATTERY BEFORE SERVICING BLOWER UNIT DISCONNECT SANDEVIL ATTACHMENT FROM BLOWER UNIT BEFORE SEVICING UNIT CODE: LUBRICATE-(L) / CHECK-(*) / CHANGE-(C ) / REPLACE-(B ) / CLEAN-(CL) SCHEDULED MAINTENANCE HOURS ________________________ SERVICED BY ____________________

MAINTENANCE 8 hrs or daily ALL UNITS – Remove and clean off all debris that has settled between the blower wheel fan and the stationary vanes. Helps to maintain peak performance (KB Blower). SANDEVIL -- Wash unit after each use (L) Check and grease caster wheel yoke (new blower unit) and mounting pin to blower unit. 20 hours (*) Complete unit to include Model KB unit. (Inspect engine air filter) 40 hours (L) Grease Caster Wheel Yoke and linkage (*) Inspect complete unit (*) Clamp Bands, Linkage and flexible hose connections (*) Wash and Clean any dirt or grime build up that has accumulated on the SANDEVIL, blower wheel fan blades. This will help to minimize vibration and maintain peak performance. 200hrs or annually (CL) &(L) Complete unit DO NOT OPERATE BLOWER UNIT WITHOUT GUARDS SECURELY ATTACHED

11

7 SPECIFICATION

SANDEVIL BT-SD06 Length: 58” (front to back) includes caster wheels and mounting linkage Width: 69” (left to right) including anti - scalping rollers Height: 38” Includes height adjustment handle Weight: Approximately 295 lbs. Tires: 3 caster wheels – 9 x 3.50-4 (non-pneumatic ) Input Power: Attached to the Model KB Blower ___________________________________________________________________________________________________

ATTENTION ALL BUFFALO TURBINE PRODUCT USERS, DEALERS, DISTRIBUTORS, SERVICE AND EQUIPMENT MANAGERS, AND MAINTENANCE PERSONNEL. ANY ENGINE SERVICE, ENGINE PARTS OR ENGINE WARRANTY CONCERNS, CONTACT YOUR LOCAL KOHLER OR HONDA REPRESENTATIVE. REPAIR PARTS MUST BE ORDERED THROUGH YOUR BUFFALO TURBINE DEALER. PLEASE CONTACT BUFFALO TURBINE’S SERVICE DEPARTMENT AT 716 592 2700 FOR ANY SERVICE QUESTION YOU MAY HAVE REGARDING THE BUFFALO TURBINE SANDEVIL, BLOWERS OR SPRAYERS. THANK YOU FOR YOUR COOPERATION.

2

A

BUFFALO TURBINE

BREAK CORNERS .005-.015

180 ZOAR VALLEY ROAD SPRINGVILLE, NEW YORK 14141 USA

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

REVISIONS

REV. DESCRIPTION DATE APPROVED

E

F

E

F

ZONE

REV

BT-SD06

D

BT-SD06SHEET 1 OF 1

SANDEVIL

2/17/06

X/XX/XXF. ROLAND

D. ODDY

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:3

2

lbs

REVDWG. NO.

D

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

WEIGHT: 309.1

TOLERANCING PER: ASME Y14.5-1994INTERPRET GEOMETRIC

2.5

193540

39 1934

38 1933

37 1932

3/8-24 NYLOC NUT

FLEX TUBE CLAMP RING

3

FLEX TUBE CLAMP ASSEMBLY

14" DIAMETER R2 BLUE TUBING

FINISH: 125 MAX

APPLICATION

USED ONNEXT ASSY

PROPRIETARY AND CONFIDENTIAL

.005THREE PLACE DECIMAL .01

IS PROHIBITED.

A

A

DO NOT SCALE DRAWING

FINAL SANDEVIL

X/XX/XX

WRITTEN PERMISSION OF BUFFALO TURBINE

XXX, RELEASE DO/FRECN#06

PART OR AS A WHOLE WITHOUT THE

..DD

.

J.S.

X/XX/XX

X/XX/XX

X/XX/XX

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

1105

1107

1108

1220

1222

1225

1237

1430

1544

1726

1849

1850

1863

1864

1865

1874

1882

1885

1886

1887

1888

1889

1894

QTY. ITEM DESCRIPTION PART NO.

4

11

4

7

2

1

4

4

2

10

2

2

3

1

1

2

4

1

1

4

2

2

3

18761

.N

NUT ZINC PLATED GR

3/8 LOCK WASHER ZINC PLATED

3/8-24 HEX

D

ZINC PLATED WASHER

WASHER, 3/8 X 1-5/8

1/2 LOCK WASHER, ZINC PLATED

LYNCH PIN, P/N 02703 PKG OF 10

RETAINER

3/8 FLAT

ZINC GR 5 NUT

BUSHING

1/4" STRAIGHT GREASE FITTING

3/8-24 X 3" HHCS GRADE 5 ZINC

25" BRUSH

CASTER

" BRUSH

WHEEL SUPPORT

REAR LEVER ROD

63

LEVER ROD

CLEVIS

FRONT

WELDMENTSANDEVIL

PINHITCH

BRACKET WELDMENTHITCH

WASHER

PLASTIC BLOCK

4" GUIDE WHEEL, SANDEVIL

1" HEX BOLT FOR SANDEVIL

3/8-24 X 3-1/2 GR5 HEX BOLT

HITCH

1-1/2 HHCS ZINC GR 11017

CASTER WHEEL ASSEMBLY3 1321

18

17

16

HITCH BAR WELDMENT

3/8-24 X

WELDMENTHITCH MOUNT

WELDMENTLEVER

WELDMENTREAR WHEEL BAR

1/2-20 HEX

WELDMENT

1898

1912

1913

1925

1926

2

1

1

1

1

1152

1171

1173

2

2

4

1/8 X 1-1/2" COTTER PIN

ELBOW SEGMENT

CLAMP BAND

16035/8-11 NYLOC NUT GR5 PLATED1

1931CASTER BLOCK WELDMENT

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/64ANGULAR: MACH 2TWO PLACE DECIMAL

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF BUFFALO TURBINE. ANY REPRODUCTION IN

FRONT WHEEL BAR

9

36

1

34

SECTION

2

5

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

3132

33

34

35

BROKEN-OUT

40

13

The SANDEVIL attachment from Buffalo Turbine is capable of improving your aerification process on the golf course in addition to minimizing the damage to the turf. The SANDEVIL is designed to use the “Turbine Powered Air” produced by the Model KB blower to evenly spread top dressing material into aerification holes up to ½. In dry conditions, a minimum of 3 passes may be needed to fill the aerification holes. Larger holes and moist condition require additional passes. Turbine powered air is diverted and baffled downward forcing the top dressing material into aerification holes or thatch. The height adjustment (lever) along with the nylon bristled skirting is designed to help contain the top dressing material and turbine powered air within the confines of the lower housing. WHEN FILLING AERIFICATION HOLES, POSITION THE HEIGHT ADJUSTMENT LEVER TO THE STTING WHERE THE NYLON BRISTLES ARE JUST TOUCHING (OR SLIGHTLY ABOVE) THE PUTTING GREEN SURFACE. POSITIONING THE SANDEVIL UNIT TO ITS LOWEST SETTING WILL REDUCE OR STARVE THE AIR FLOW PRODUCED FROM THE TURBINE TO THE SANDEVIL ATTACHMENT. The heavy-duty steel construction and caster wheels combined with the powder-coated finish translates to minimal maintenance requirements. In a matter of minutes the SANDEVIL is easily attached to any Buffalo Turbine Model KB blower unit.

Buffalo Turbine LLC

NEW SANDEVIL ATTACHMENT

APPROXIMATELY 10 SHOTS OF GREASE IS NEEDED FOR EACH FITTING

Buffalo Turbine LLC 180 Zoar Road Springville, NY 14141 Tel: 716-592 2700 Fax: 716-592-2460info@buffaloturbine.com

14

SANDEVIL ASSEMBLY INSTRUCTIONS / BT-SD06

Part #’s 1237 & 1222 ½ -20 nut and lock-washer

Part # 1889 Hex shoulder bolt (use nut & lock washer)

Part # 1888 4” Wheel

Remove all parts and SANDEVIL Housing from boxed container. BEFORE UPRIGHTING THE SANDEVIL UNIT PROCEED PER INSTRUCTIONS Install (2) Nylon wheels and shoulder bolts as shown with lock washer and nut. Tighten both sides. TURN UNIT OVER AND CAREFULLY PLACE THE SANDEVIL’S BOTTOM BAFFLE PLATE ON STABLE BLOCKS OR STANDS. DO NOT SET THE UNIT ON BRISTLES WHILE ASSEMBLING UNIT.

PLACE FRONT AND REAR BAR WELDMENTS (PART #’S 1925 & 1926) INTO THE “U” BRACKETS. THE LINKAGE ARMS ON EACH LEVER ROD MUST BE POSITIONED ON THE SAME SIDE AS THE LINKAGE BRACKET AS SHOWN BELOW.

15

Part # 1926

Part # 1925

Part # 1876

Place into “U” brackets (Front)

Place into “U” brackets (Rear)

Linkage Bracket

Linkage Bracket Linkage

Arm

Linkage Arm

APPROXIMATELY 10 SHOTS OF GREASE IS NEEDED FOR EACH FITTING

16

ADD A DAB OF GREASE TO THE INSIDE RADIUS OF PART # 1887, (PLASTIC BLOCKS). INSTALL BY TAPPING PLASTIC BLOCKS INTO THE 4 PLACES OVER FRONT AND REAR LEVER RODS (RADIUS DOWN). TIGHTEN BY USING (4) 3/8 – 24 X 3” BOLTS (PART # 1726) AND (4) NYLOC NUTS.

ADD A DAB OF GREASE TO THE INSIDE RADIUS

PART # 1187

Part #’s 1726 & 1935 3/8 –24 x 3 HHCS with nyloc nut 4 places

17

INSTALL HEIGHT ADJUSTMENT LEVER ONTO 5/8 – 11 STUD. LEVER MUST BE “CLOSE TO HORIZONTAL” WHEN INSTALLING ONTO STUD. ALIGN GROOVE, PULL SPRING LEVER THEN ROTATE ARM TO THE VERTICAL POSITION. INSTALL 5/8 – 11 NYLOC NUT AND TIGHTEN TO REMOVE FREEPLAY IN THE LEVER. DO NOT OVER TIGHTEN.

PART # 1913 ADJUSTMENT LEVER

PART # 1865 FRONT LEVER ROD

PART # 1864 REAR LEVER ROD

Part # 1913 Adj. Lever

5/8 –11 STUD

CONNECT FRONT AND REAR LEVER RODS USING CLEVIS PINS, ½” FLAT WASHER AND COTTER PINS. THE LEVER RODS ARE PRE-SET FROM THE FACTORY.

18

INSTALL WHEELS USING A 3/8 – 24 X 3” BOLT AND NYLOC NUT THRU ALUMINUM WHEEL SUPPORT (PART # 1863 / 3 PLACES). THEN BOLT WHEEL BAR WELDMENTS TO THE TOP OF THE CASTER WHEEL BLOCK USING 3/8 –24 X 4” BOLTS AND NYLOC NUTS (PART # 1894 / 3 PLACES). DO NOT OVER TIGHTEN

3/8 BOLT – 4” LONG W/ NYLOC NUT

ALUM. WHEEL SUPPORT BLOCK

3/8 BOLT - 3” LONG W / NYLOC NUT

19

ASSEMBLE LINKAGE ARMS PER PHOTO. EACH CONNECTIONS REQUIRES 4 EACH OF PART # 1882 (HITCH PIN), PART # 1220 (RETAINER WASHER, 3/8 X 1-5/8 DIA), part # 1101 (3/8-24 x 1-1/2 HHCS ZINC)

Part # 1882

Part # 1882 Part # 1220 Part # 1101

Part # 1885

Part # 1912

Part # 1886 washer

Part # 1225 Lynchpin

Part # 1430 bushing

APPROXIMATELY 10 SHOTS OF GREASE IS NEEDED FOR EACH FITTING

20

MOUNT HITCH BRACKET WELDMENT PER DIMENSIONS. ACCURATELY DRILL (2) ½” HOLES THRU THE BOTTOM REAR FRAME.

USE (2) ½ -13 X 3-1/4 HHCS AND (2) ½” NYLOC NUTS TO MOUNT BRACKET. SECURELY FASTEN. BOTTOM OF BRACKET MUST BUTT AGAINST BOTTOM FRAME OF BLOWER UNIT

9.375” 3.375

ASSEMBLE ELBOW SEGMENTS AND FLEXABLE TUBING TO SANDEVIL ATTACHMENT AND TO THE ELBOW BASE OF THE MODEL KB2 BLOWER LOOSEN BOTH MOUNTING SCREWS ON ROTATION BRKT. LOOSEN BELT AND RETIGHTEN SCREWS. THIS WILL PREVENT DAMAGE TO THE FLEXABLE TUBING

APPROXIMATELY 10 SHOTS OF GREASE IS NEEDED FOR EACH FITTING