MOTOR MOUNTS are located between the trunking sections to save space on the head ser-vice platform while providing convenient access to the motor and drive. Channel irons provide mounts for pre-welded platforms for quick and easy installation.

PLATFORMS &MOTOR MOUNT

B

CROWNED WING STYLE BOOT PULLEYS are standard in all sizes of legs. Pulleys ride on heavy duty shafts with heavy duty double tapered pillow block bearings*.

BOOT SECTION

UPSIDE BOOT HOPPERdirects material flow for

proper bucket fill

DOWN SIDE BOOT HOPPERsecondary hopper for additional fill option

HINGED INSPECTION DOORlocated for quick inspection

of components. Gasketed and sealed to prevent dust leaks.

BEARING AND SEALHeavy duty bearings* sized for the job. A UHMW seal eliminates dust leakage.

SCREW TAKE-UPgenerously sized for maximum pulleyadjustment. Designed for rugged duty.

ANGLED BOOT CLEANOUT

angled to promote boot cleanout with

cups. Easily removed for

clean out access.

*Bearings: Medium 24” Legs and larger have spherical double roller pillow block bearings. “C” and Junior Legs have sealed pillow block ball bearings.

BOOT CONSTRUCTIONBoot specifications vary from 10 gauge to 7 gauge depen-dent on bucket elevator size.

D

Reinforced INSPEC-TION STATIONS ensure trunk integ-rity when remov-able covers are off. Inspection ports can be positioned in four different loca-tions by rotating the section and cover, allowing for easier ongoing inspection and maintenance.

C INSPECTION SECTION AND TRUNKING

A

B

C

D

CROWNED DRUM STYLE PULLEYSwith SCOF vulcanized lagging are stan-

dard, pulleys with removable slide lagging (shown), are available. Head shafts are

turned, ground and polished head shafts

PRESSURE-RELIEF PANELdesigned to meet

NFPA standards

MULTIPLE PIECE HOOD ASSEMBLYallows for ease of maintenance

HEAVY DUTY POLYETHYLENE BUCKETS

are lightweight, resist bending and breaking

RUBBER BELTINGstays flexible in

cold weather

OVERSIZE INSPECTION PANELallows for easy inspection and maintenance

HEAD SECTION

GENTLE DISCHARGEdesigned for optimum discharge angle

WEATHER TIGHT LIP SEAL

provides protection from the elements

TORQUE ARM BRACKETheavy duty to ensure

proper speed reducer torque arm support

BEARING AND SHAFT SEALUHMW seal, internally mounted for weather tight seal. Bearing cover minimizes direct moisture access to bearing.

BEARING AND SHAFTHeavy duty double row pillow block bearings* with jacking bolts and gussets to ensure turned ground and polished head shaft runs true and level.

DISCHARGE LININGa variety of lining options available. Lined with 1/4” urethane backed by 16 ga. steel on Senior Series Legs.

HINGED INSPECTION DOORwith over center clamp

A

LADDER HANDLESconveniently located forentering head platform.

BUCKET ELEVATORC O M P O N E N T S