4
PROCEDURE FOR BTS-EXTENSION RACK COMMISSIONING Connect LMT cable to Base Rack and so you can commission for the Extension Rack. Start Programs LMT271_1_34_05 Start LMT LMT Control Center window will appear Wait for LOGON to become dark blue Click on logon Enter the Username : SAG Enter Password : SAG Connect and close Click on Input handler (another window will come up) 1.Download Software(if Base Rack has not been commissioned before) Managed Element Software Management Double click on Software management DNLALL.EXE SRCPATH---c:\SW\BTSPLUS\HS011692.SWL Overwrite yes (It will take 10 mins.) and After completion of download 2. Software Activation(if Base Rack has not been commissioned before) Managed element BSS functional BTSM (Double click) Activate BTSM BTSM: 0 FileID : HS011692.SWL (copy from rel_notes and paste) FileSWV: 01-04-16-01-87-00_04-09-09 (copy from rel_notes and paste) After giving activate SW BTS will ask for login again. BTS will be in phase2 3. Creation as per Configuration(From this point PH2, you can start commissioning for the Ext Rack) BTSEP Double click on Rack Set Rack:1(if Rack 0 “base rack” is already created) Vendna: Siemens / TypRack : BS240XL and Submit BPORT CREATE BPORT NAME: BPORT:2/ L1PT: PCM30 CRC4 (DEFAULT) / LCONF: STAR/MULTI/ LOOP (as instructed) BER : LOWER: E10_6 / UPPER: E10-3 ; (Remember:BPORT: 1 for Multi drop, BPORT: 2 for separate E1) LAPDLE CREATE LAPDLE NAME: LAPDLE:0 (signaling cut off 32 channels) / LAPDCH: BPORT BPORT: 0 TSL: 31 (Depending on SITE LINKAGE) / SSL: FULL_64KB BTSE SETBTSEP NOT REQUIRED SALUNAM: (Shelf unique name as given in the BTS paper) For identification of the site in BSC. Vendname: Siemens BTSM SETBTSM TEI:0 (limited up to 63) Create COSA(in RACK 0 “Base Rack” if COSA is absent or there is dummy COSA already) Replace real COSA if there is dummy COSA inserted) CU CREATE CU (As equipped) Eg: CREATE CU:NAME=RACK:1/CU:0&&11, RXLEVADJ=0-0; (After which lock and delete CUs which are not present. CUs:3 and 9 in our config.) DUVSWRCREATE DUVSWR (as equipped) For Example: Creation of 3/3/3 with 4:2 combiners CREATE DUVSWR: NAME=RACK:1/DUVSWR:0 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR=CU0&1 (Depending on the cable connections of CUs to DUAMCO) CREATE DUVSWR: NAME=RACK:1/DUVSWR:1 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR=CU2&CU3; CREATE DUVSWR: NAME=RACK:1/DUVSWR:2 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR=CU4&5; CREATE DUVSWR: NAME=RACK:1/DUVSWR:3 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR=CU10&CU11; CREATE DUVSWR: NAME=RACK:1/DUVSWR:6 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR=CU6&7; CREATE DUVSWR: NAME=RACK:1/DUVSWR:7 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR=CU8&CU9; DULNA CREATE DULNA (as equipped) For Example: Creation of 3/3/3 CREATE DULNA: NAME=RACK:1/DULNA:0 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR=CU0N&1N&2N&3N; CREATE DULNA: NAME=RACK:1/DULNA:1 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR= CU0D&1D&2D&3D; CREATE DULNA: NAME=RACK:1/DULNA:2 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR= CU4N&5N&10N&11N; CREATE DULNA: NAME=RACK:1/DULNA:3 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR= CU4D&5D&10D&11D; CREATE DULNA: NAME=RACK:1/DULNA:6 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR= CU6N&7N&8N&9N; CREATE DULNA: NAME=RACK:1/DULNA:7 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR=CU6D&7D&8D&9D; FANP CREATE FANP (0 to 5 FOR BS240 AND 0 TO 7 FOR BS240XL) For example: CREATE FAN:NAME=RACK:0/FAN:0&&7; Creation of external alarm ENVABTSE(Not Required for the Ext Rack) For Example: CREATE ENVABTSE:NAME=RACK:0/ENVABTSE:2,INTINF=low, ASEV=CRITICAL, ASTRING=”MAINS FAILURE”; CREATE ENVABTSE:NAME=RACK:0/ENVABTSE:3,INTINF=low, ASEV=MAJOR, ASTRING=”DC RECTIFIER FAIL”; CREATE ENVABTSE:NAME=RACK:0/ENVABTSE:4,INTINF=hIGH, ASEV=MAJOR, ASTRING=”AC FAIL”; INTEGRATION Managed element BSS functional Double click on BTSM set BTSM: ABISLKSA: Terrestrial connection (Satellite Connection for Satellite), TEI: 0 Managed element BSS functional Double click on BTSM CONNBSC (to connect with BSC) Now Login again, BTS should be PH3 Unlock the BTSM to radiate all connected (E/F) CUs (if TRX provided) Set SW load safety FILE HS011818.SWL & SUBTYPE 01-04-18-01-18-07_08-04-03

BTS Commissioning 240XL II Extension Rack

Embed Size (px)

Citation preview

Page 1: BTS Commissioning 240XL II Extension Rack

�������������� ���������������������������������

PROCEDURE FOR BTS-EXTENSION RACK COMMISSIONING �Connect LMT cable to Base Rack and so you can commission for the Extension Rack. Start � Programs � LMT271_1_34_05 � Start LMT LMT Control Center window will appear Wait for LOGON to become dark blue Click on logon Enter the Username : SAG Enter Password : SAG Connect and close Click on Input handler (another window will come up) 1.Download Software(if Base Rack has not been commissioned before)

Managed Element � Software Management Double click on Software management � DNLALL.EXE

SRCPATH---c:\SW\BTSPLUS\HS011692.SWL Overwrite� yes (It will take 10 mins.) and After completion of download 2. Software Activation(if Base Rack has not been commissioned before)

Managed element � BSS functional �BTSM (Double click) � Activate BTSM BTSM: 0 FileID : HS011692.SWL (copy from rel_notes and paste) FileSWV: 01-04-16-01-87-00_04-09-09 (copy from rel_notes and paste) After giving activate SW BTS will ask for login again. BTS will be in phase2

3. Creation as per Configuration(From this point PH2, you can start commissioning for the Ext Rack)

� BTSEP � Double click on Rack � Set Rack:1(if Rack 0 “base rack” is already created) Vendna: Siemens / TypRack : BS240XL and Submit

� BPORT � CREATE BPORT NAME: BPORT:2/ L1PT: PCM30 CRC4 (DEFAULT) / LCONF: STAR/MULTI/ LOOP (as instructed) BER : LOWER: E10_6 / UPPER: E10-3 ; �������������� ������ �(Remember:BPORT: 1 for Multi drop, BPORT: 2 for separate E1)

�LAPDLE � CREATE LAPDLE NAME: LAPDLE:0 (signaling cut off 32 channels) / LAPDCH: BPORT BPORT: 0 TSL: 31 (Depending on SITE LINKAGE) / SSL: FULL_64KB

� BTSE � SETBTSEP� NOT REQUIRED SALUNAM: (Shelf unique name as given in the BTS paper) For identification of the site in BSC. Vendname: Siemens

�BTSM �SETBTSM � TEI:0 (limited up to 63) � Create COSA(in RACK 0 “Base Rack” if COSA is absent or there is dummy COSA already)

• Replace real COSA if there is dummy COSA inserted) �CU � CREATE CU (As equipped)

Eg: CREATE CU:NAME=RACK:1/CU:0&&11, RXLEVADJ=0-0; (After which lock and delete CUs which are not present. CUs:3 and 9 in our config.)

����DUVSWR����CREATE DUVSWR (as equipped) For Example: Creation of 3/3/3 with 4:2 combiners CREATE DUVSWR: NAME=RACK:1/DUVSWR:0 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR=CU0&1

(Depending on the cable connections of CUs to DUAMCO) CREATE DUVSWR: NAME=RACK:1/DUVSWR:1 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR=CU2&CU3; CREATE DUVSWR: NAME=RACK:1/DUVSWR:2 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR=CU4&5; CREATE DUVSWR: NAME=RACK:1/DUVSWR:3 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR=CU10&CU11; CREATE DUVSWR: NAME=RACK:1/DUVSWR:6 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR=CU6&7; CREATE DUVSWR: NAME=RACK:1/DUVSWR:7 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR=CU8&CU9;

����DULNA ���� CREATE DULNA (as equipped) For Example: Creation of 3/3/3 CREATE DULNA: NAME=RACK:1/DULNA:0 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR=CU0N&1N&2N&3N; CREATE DULNA: NAME=RACK:1/DULNA:1 CELL NO=3 COMBMD=FourToTwo, WDDUVSWR= CU0D&1D&2D&3D; CREATE DULNA: NAME=RACK:1/DULNA:2 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR= CU4N&5N&10N&11N; CREATE DULNA: NAME=RACK:1/DULNA:3 CELL NO=4 COMBMD=FourToTwo, WDDUVSWR= CU4D&5D&10D&11D; CREATE DULNA: NAME=RACK:1/DULNA:6 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR= CU6N&7N&8N&9N; CREATE DULNA: NAME=RACK:1/DULNA:7 CELL NO=5 COMBMD=FourToTwo, WDDUVSWR=CU6D&7D&8D&9D;

����FANP���� CREATE FANP (0 to 5 FOR BS240 AND 0 TO 7 FOR BS240XL) For example: CREATE FAN:NAME=RACK:0/FAN:0&&7;

����Creation of external alarm ENVABTSE(Not Required for the Ext Rack) For Example: CREATE ENVABTSE:NAME=RACK:0/ENVABTSE:2,INTINF=low, ASEV=CRITICAL, ASTRING=”MAINS FAILURE”; CREATE ENVABTSE:NAME=RACK:0/ENVABTSE:3,INTINF=low, ASEV=MAJOR, ASTRING=”DC RECTIFIER FAIL”; CREATE ENVABTSE:NAME=RACK:0/ENVABTSE:4,INTINF=hIGH, ASEV=MAJOR, ASTRING=”AC FAIL”; INTEGRATION Managed element� BSS functional � Double click on BTSM � set BTSM: ABISLKSA: Terrestrial connection (Satellite Connection for Satellite), TEI: 0 Managed element� BSS functional � Double click on BTSM� CONNBSC (to connect with BSC) Now Login again, BTS should be PH3 Unlock the BTSM to radiate all connected (E/F) CUs (if TRX provided) Set SW load safety FILE HS011818.SWL & SUBTYPE 01-04-18-01-18-07_08-04-03

Page 2: BTS Commissioning 240XL II Extension Rack

�������������� ���������������������������������

Physical Connection between the Base Rack and Extension Rack

SELIC BUS - For CU CC link connection to main cabinet CAN BUS - For CAN link connection to main cabinet

CAN OUT termination

Page 3: BTS Commissioning 240XL II Extension Rack

�������������� ���������������������������������

��������� ��������� �� ��������������

=============================================== 5 4 3 2 1 TX: PURPLE GREEN Gnd Gnd Gnd RX: WHITE BLUE ������

Blue - White (RX) || Green - Purple (TX) ===================================================== �������� � ���

Green Purple (TX) Green purple Blue White (RX) orange white ��� ������������������������

��������� ��� ��� ����������� �����������������������

�� �������������������������

�� ������������������������� �

Page 4: BTS Commissioning 240XL II Extension Rack

�������������� ���������������������������������

������������ �������!"�#���$"���� ������������������������� �

�������

� !%"��� &���������������'�#��( !%"���)��* ��������������%�����������'!������!"�%!!��

����!������#!( ( !��* ����+ �&��,-���!����.��/������'!��,��'���'���"���!'������)������0�

�����$!���%,����� &���( "���)��#!���%���%/ �

+ �������� &���'����,�������� ������������!�)�!0������!�'!�������")��1"��������,��������

� ����!'���� ����������!���������"�