Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Production Logging
merging surface-depth data to downhole tool data gives our customers the ability to quickly swap to alternative conveyance methods. Our software has easy export ability to get the data into the hands of analysts quickly.
All connectors are standard “GO” pin, so our customers can use the auxiliary equipment they already own and maintain. We also carry a wide assortment of running gear to fully prepare for difficult logging situations if a key part is missing from a customer’s inventory.
Tools that are robust, combinable, and able to run in both real time and memory situations are what we provide. Wedesign our tools to work within the proprietary WTSbus protocol so that everything is modular in nature. By doing so it allows our customers to pick and choose what sensors they want to provide for their services. It all works together and simultaneously. There are no “project” tools in our product line. We make sure that our customers maintain the flexibility to add to what they currently own.
Our telemetry is designed to be simple to use and implement in older units in the field as well as new ones. The telemetry is fully compatible with the Warrior Well Logging System and does not require any additional cards or panels to get a 50Kpbs transmission rate. If our customers need more speed, we can obtain 200Kbps with additional hardware on surface.
When switching from running in real time to memory, you use the same sondes. Easy configuration for individual sonde sample rate(s), tool hibernation timing(s), and
OUR VISION
www.hunting-intl.com
24-HOURSUPPORT
Our mechanical, electrical, and petroleum engineers have come from the wireline field.
CONFIDENCE IN EXPERIENCE
Our support team is available to help when issues arise day or night.
We establish relationships that go past the point of sale.
PARTNER NOT SUPPLIER
R&D focused on our partners' needs and requests to impact the market at a local level.
TARGETEDTECHNOLOGY
The Wireline Telemetry System (WTC) is used when real time data acquisition is needed.The telemetry polls sondes connected below it for data and encodes the data for efficient transmission to surface. The WTC also receives commands from surface to control working mode of downhole sondes.
· WTC provides link from surface acquisition system to downhole tools
· Transmits any WTSbus protocol sonde in any configuration
· Sonde data is displayed in real time
· Bi-directional communication
· Minimum link speed of 50kbps
· Maximum link speed of 200kbps
· No cards, panels, or additional hardware needed
· Regularly updated service
· One service covers all tool configuration options
· Tool calibrations available online 24/7
· Tools come with exported Warrior configuration file for quick integration
Description
Warrior Compatability
Specifications
Wireline Telemetry System WTC
‘Excellence in Energy Services for over 100 years’
bus
1-3/8"(35mm) 1-11/16"(43mm)
350˚F (175˚C)
15,000psi (103MPa)
180VDC
1.5A
50kbps
200kbps
300bps
500kbps
PROTOCOL
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
VOLTAGE
CURRENT RATING
MINIMUM UPLINK RATE
MAXIMUM UPLINK RATE
DOWNLINK RATE
TOOL BUS RATE
www.hunting-intl.com
The Memory Logging System (MLP) is used when electric line conveyed realtime logging is not an available option, when using Slickline, or when using Coiled Tubing. A standard memory job consists of the following procedure:
· DMC is synced and programmed through the MCM
· TDR is connected to depth control device and records time versusdepth
· Tools are lowered into hole and pre-set procedure is executed on the DMC torecord time versus sonde samples
· Once back at surface, TDR and DMC data are merged in software tocreate a log
· Slickline
· Coil Tubing
· Below standard wireline
· Extended reach tractor jobs
· Drill Pipe
Description
Conveyance
Specifications
Memory System MLP
‘Excellence in Energy Services for over 100 years’
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
VOLTAGE
CURRENT
STAND-BY CURRENT
SAMPLING RATE
DOWNLOAD RATE
MEMORY CAPACITY
COMMUNICATION RATE
BATTERY CAPACITY
1-3/8"(35mm) 1-11/16"(43mm) 2-7/8" (73mm)
350˚F (175˚C)
15,000psi (103MPa)
13.5-20 VDC
15-30mA
2mA
20ms-24hr, 20ms increment, adjustable
4MB/min to cpu
512mb (1GB custom)
500kbps
6.2AH or 26.5AH
Real Time Clock***optional
www.hunting-intl.com
· Gamma Ray Tool (GRT)
· Casing Collar Locator (CCL)
· Fluid Density Radioactive (FDR)
· Fluid Density Acoustic (FDA)
· Spectral Noise Tool (NST)
· Capacitance/Temperature/Flow (HTF)
· Folding Flowmeter (CSFM)
· Continuous Flowmeter (CFJ)
· Inline Spinner Flowmeter (ILB)
· Quartz Pressure / CCL (QPC)
· Fast Response Temperature (RDT)
Standard Tools
Production Logging Tools consist of a combination of different sensors and ancillary tools. The PLT tools can be combined with any tool in the WTSbus Suite using a Wireline Telemetry Cartridge (SRO) or Downhole Memory Cartridge (Memory). All tools can be combined in any order to facilitate well-specific requirements.
· Evaluate completion efficiency
· Detection of mechanical problems
· Provide guidance for workovers
· Evaluate treatment techniques
· Monitor or profiling of production
· Detect thief zones
· Determine reservoir characteristics
· Define reservoir boundaries
· Leak detect
Description
Applications
Specifications
Production Logging Tools PLT
‘Excellence in Energy Services for over 100 years’
WTSbus
1-3/8"(35mm) 1-11/16"(43mm)
350˚F (175˚C)
15,000psi (103MPa)
180VDC 35mA
PROTOCOL
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
VOLTAGE/CURRENT
· Roller Centralizer Tool (RCT)
· Knuckle Joint Tool (KJT)
· Swivel Sub (PSC)
· Downhole Tension Tool (DTT)
· Dual Roller Centralizer (DRC)
· Spring Bow Centralizer (SCT)
· Addressable Release Tool (ART)
Auxiliary Tools
www.hunting-intl.com
Production Logging Tools PLT
‘Excellence in Energy Services for over 100 years’
Standard Tool Specifications
Nal
6 Oriented Magnet
Nal Crystal / AM241 or CS137
±0.01g/cc
±0.03g/cc
±0.01g/cc
±0.03g/cc
Piezoceramic
100Hz - 12.7KHz
MP3
0 - 45%
±1%
±0.018˚F (0.01˚C)
±3.6˚F (2˚C)
<0.5s
10 PPR
Jeweled or Ball Bearing
QUARTZDYNE
±3.2 psi
±1.6 psi
<1s
6 Oriented Magnet
±0.09˚F (0.05˚C)
±0.009˚F (0.005˚C)
<0.08 s
SONDE COMPOSITION
SONDE CONFIGURATION
SONDE CONFIGURATION
PRECISION
ACCURACY
PRECISION
ACCURACY
SONDE COMPOSITION
OPERATING FREQUENCY
OUTPUT FORMAT
CAPACITANCE RANGE
CAPACITANCE ACCURACY
TEMPERATURE PRECISION
TEMPERATURE ACCURACY
TEMPERATURE RESPONSE TIME
FLOW RESOLUTION
SONDE COMPOSITION
SONDE COMPOSITION
ACCURACY
RESOLUTION
RESPONSE TIME
SONDE CONFIGURATION
ACCURACY
RESOLUTION
RESPONSE TIME
GAMMA RAY (GRT)
CCL (CCL)
FLUID DENSITY RADIOACTIVE (FDR)
FLUID DENSITY ACOUSTIC (FDA)
SPECTRAL NOISE TOOL (NST)
CAPACITANCE / TEMPERATURE / FLOW (HTF)
FLOW METER (CSFM / CFJ / ILB)
QUARTZ PRESSURE COLLAR LOCATOR (QPC)
FAST RESPONSE TEMPERATURE (RDT)
www.hunting-intl.com
The RBT is equipped with one transmitter and two receivers constructed out of piezoelectric crystals. The near receiver, located 3Ft from the transmitter, is constructed of an 8-sector radial sensor. The primary amplitude is constructed from radial signals at the near receiver while the Variable Density Log is constructed from the far receiver. The RBT can be deployed in deviated holes and combines easily with any of the other range of tools. The tool is comprised of H2S resistant materials throughout. All RBT tools have a built-in orientation sensor that allow for relative bearing and deviation data.
The analog waveform is completely digitized downhole and converted back to analog at surface for interpretation. By digitizing downhole, the tool is able to:
· By-pass analog calibration pulse issues on H2S line transmission
· Store and revert to a calibrated configuration upon power up. Internal memory settings for sensor pickupscircumvent the need for free pipe calibration.
· Provide quantitative analysis of cement bond in eight 45-degree segments foridentification of channels in cement
· Identification of intervals of uniform bonding and detection of cement quality incasing sizes from 4 1/2 in to 13 3/8 in.
· Quantitative analysis of cement bond to casing
· Qualitative analysis of cement bond to formation
Description
Applications
Specifications
Cement Bond Logging Tool RBT
‘Excellence in Energy Services for over 100 years’
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
LENGTH
TRANSMITTER
RECIEVERS
VOLTAGE
CURRENT
CASING DIAMETER
LOGGING SPEED
3-1/8'' (80mm)
107.0" (2718mm)
8 (45 Deg)
50mA
4 1/2" -13 3/8" (114-340mm)
1-11/16'' (43mm)
114.3" (2902mm)
6 (60 Deg)
82mA
1 3/4" -7" (45-177.8mm)
WTSbus
350˚F (175˚C)
20,000psi (140MPa)
1 Piezoelectric
18 VDC
35ft/min (11m/min)
www.hunting-intl.com
The Multi-Finger Imaging Tool has been designed to provide the most accurate Pipe ID caliper measurements in the industry. The high-quality output data allows for 3-D imaging and calculation of corrosion, penetration, or scale deposition.
The MFI tool can be combined with any other tool in the WTSbus suite using a Wireline Telemetry Cartridge (SRO) or Downhole Memory Cartridge (Memory).
All MFI tools have a built-in orientation sensor that allows for relative bearing and deviation data correction. Temperature correction is hardware-based, so no software drift files are needed. The mechanical design allows for easy finger replacement in the field.
· Tubular damage analysis
· Perforation mapping
· Quantification of scale build up and corrosion
· Accurate location mapping of holes and anomalies
· Large casing (up to 21”) inspection with extension kit
Description
Applications
Specifications
Multi-Finger Imaging Tool MFI
‘Excellence in Energy Services for over 100 years’
WTSbus
2-7/8'' (73mm)
350°F (175°C)
15,000psi (100MPa)
58.2" (1479mm)
40
18VDC
30mA
<300mA
3" to 8.25"
±0.03"
0.110"
0.005"
0.75lbs-1.25lbs (.34kg-.57kg)
‡5/6†
30ft/min (10m/min)
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
LENGTH
FINGERS
VOLTAGE
CURRENT
MOTOR RATE
PIPE RANGE
ACCURACY
VERTICAL RESOLUTION
RADIAL RESOLUTION
FINGER FORCE
INCLINOMETER
LOGGING SPEED
1-11/16'' (43mm)
49.88" (1267mm)
24
25mA
1-3/4" to 7"
±0.03"
0.082"
0.003"
4'' (102mm)
60.51" (1537mm)
60
30mA
4-1/2" to 9-5/8"
±0.03"
0.167"
0.005"
www.hunting-intl.com
The Electromagnetic Thickness Tool - Concentric (EMT-C) is designed to detect the damage of tubulars by calculating the remaining wall thickness and corrosion extent. By measuring the phase shift of an induced electromagnetic field, it can accurately indicate the column structure and location of other objects in concentric pipe.
· Measure the remaining wall thickness of concentric casing in one run
· Determination of the type(s) of damage: pits, penetrations, cracks in transverse orlongitudinal plane
· Determination of inner casing penetration
· Locating inner and outer collars in concentric casing
· Wellbore temperature logging
Description
Applications
Specifications
ElectroMagnetic Thickness Tool EMT-C
‘Excellence in Energy Services for over 100 years’
bus
1-11/16"(43mm)
350˚F (175˚C)
15,000psi (100MPa)
78.74" (2000mm)
H2S Tolerant
20 ft/min (350/hr)
20Ib (9kg)
2 1/2"-17" (63 - 432mm)
0.02" (0.5mm) Single Pipe
0.06" (1.5mm) Double Pipe
1.5" (40mm) Single Pipe
2" (50mm) Double Pipe
1/6 of the perimeter
.5" (12mm) Single Pipe
1" (25mm) Double Pipe
PROTOCOL
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
LENGTH
MATERIALS
LOGGING SPEED
WEIGHT
MEASUREMENT RANGE
MEASUREMENT ACCURACY
MIN. AXIAL DETECTABLE LENGTH
MIN. TRANVERSAL DETECTABLE LENGTH
THICKNESS RANGE (MAX.)
www.hunting-intl.com
The Electromagnetic Thickness Tool - Radial (EMT-R) is designed to detect the damage of tubulars by calculating the remaining wall thickness and corrosion extent. Twelve bowspring arms contain sensors that measure residual thickness based on the remote field eddy current principle.
Processed data can be combined with caliper in order to generate detailed interpretation of wellbore condition along with 3D image.
· Measure the remaining wall thickness of casing
· Determination of the type(s) of damage: pits, penetrations, cracksintransverse or longitudinal plane
· Sectored sensors allow localized identification of damage
· Inner and outer wall damage identification
· Casing collar identification
Description
Applications
Specifications
ElectroMagnetic Thickness Tool EMT-R
‘Excellence in Energy Services for over 100 years’
bus
1-11/16"(43mm)
350˚F (175˚C)
15,000psi (100MPa)
85.86" (2181mm)
H2S Tolerant
15ft/min (300m/hr)
30Ib (13.7kg)
2"-7"
15% of Casing Thickness
PROTOCOL
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
LENGTH
MATERIALS
LOGGING SPEED
WEIGHT
MEASUREMENT RANGE
MEASUREMENT ACCURACY
www.hunting-intl.com
The Spectral Noise Tool is used to detect the incoming noises in the wellbore generated at different spectral frequencies from different sources. By analyzing the frequency spectrum, the nature of fluids may be determined and leaks can be located.
Noise logging is applicable to oil/gas/water wells. It increases the success rate of locating leaks and channeling in tubulars. When combined with temperature and flowrate measurements, extensive quantitative interpretation can be performed.
Real time monitoring combined with the ability to save the audio to digital file provides better confidence in analysis.
· Location of production interval and productivity evaluation
· Fluid identification and flow rate evaluation
· Inspection of the channeling behind casing, leaks, backflows, sandproduction, and effect of packers
Description
Applications
Specifications
Spectral Noise Tool NST
‘Excellence in Energy Services for over 100 years’
bus
1-11/16"(43mm)
350˚F (175˚C)
20,000psi (140MPa)
33.29" (846mm)
H2S Tolerant
15ft/min (300m/hr)
30Ib (13.7kg)
100Hz - 12.7KHz
100Hz
MP3
PROTOCOL
DIAMETER
MAX. TEMPERATURE
MAX. PRESSURE
LENGTH
MATERIALS
LOGGING SPEED
WEIGHT
OPERATING FREQUENCY
FREQUENCY RESOLUTION
AUDIO OUTPUT FORMAT
www.hunting-intl.com
The downhole tractor is an electric motor-powered system consisting of a surface control panel and downhole assembly, which include a Tractor Control Cartridge (TCC), a Downhole Tractor Tool (DTT), and auxiliary tools.
The TracSIM software is included to enable the operator to determine the specific bottom hole assembly to control the risk before operations. The conveyance process is monitored in real time so that the operator knows where the tractor system and the passenger tool(s) are while downhole.
The downhole tractor is capable of conveying a variety of tools in highly deviated, severe doglegged, or horizontal wells:
· Well logging tools
· Perforating tools
· Completion tools
Description
Applications
Specifications
Downhole Tractor System DTS
‘Excellence in Energy Services for over 100 years’
DIAMETER
POWER SUPPLY
MAX. TEMPERATURE
MAX. PRESSURE
LENGTH
WEIGHT
SPEED
MAX. PULL
VOLTAGE
CURRENT
DTT
TCC
DTT
TCC
2-7/8" (73mm) 3-1/2" (89mm)
0-850VDC
311°F (155°C)
15,000psi (103MPa)
145.39" (3693mm) 163.03" (4141mm)
61.97" (1574mm) 64.21" (1631mm)
154lb (70kg) 174lb (79kg)
44lb (20kg) 49lb (22kg)
20 ft/min (6m/min)
880lb (400kg) 1100lb (500kg)
<850VDC
<2.1 A
www.hunting-intl.com
Further Information Global Headquarters
Hunting’s mission is to innovate and manufacture quality oil/gas extraction equipment and dsitribute it across the largest independent global supply chain.
Hunting’s energetics division produces the greatest number of shaped charges in the world.
Hunting’s instrument division produces the most widely used addressable switch in the world.
Products and Services
Global Business Units
Proprietary Technology
Hunting develops innovative technology that simplifies and improves the way oil and gas are extracted, with a full range of applications below the wellhead including mud motors, premium connections, well perforating, logging and intervention tools.
Geographic Footprint
Over 40 manufacturing and distribution locations are strategically located in the key energy producing regions of the world.
OCTG and Connection Technology
Drilling Tools
Logging Instruments
Perforating Systems
Intervention Tools
Advanced Manufacturing
Subsea
Hunting Energy Services Inc.16825 Northchase Drive, Suite 600Houston, Texas 77060-3236 USAT. +1 281 442 7382
Web
www.hunting-intl.com