Government College of Engineering, Amravati (An Autonomous Institute Of Government of Maharastra) Fourth Semester B.tech.(Mechanical Engineering) Class test 1 Course :- Machine Drawing (MEU405) Time: 1 hr Max Marks :8 Q.1) Draw the front view(FV) and top view(TV) of the fig. shown below. (3) (All dimensions in MM) Q.2) For the object shown below draw i) Sectional Front View ii) Top View (5) iii) Left Hand Side view OR
Government College of Engineering, Amravati(An Autonomous
Institute Of Government of Maharastra)Fourth Semester
B.tech.(Mechanical Engineering)Class test 1 Course :- Machine
Drawing (MEU405)Time: 1 hrMax Marks :8Q.1) Draw the front view(FV)
and top view(TV) of the fig. shown below. (3) (All dimensions in
MM)Q.2) For the object shown below draw i) Sectional Front View ii)
Top View (5)iii) Left Hand Side viewORA hexagonal prism of side of
base 30 mm and axis 75mm long is resting on its base on HP such
that a rectangular face is parallel to VP. I t is cut by a section
plane , perpendicular to VP and inclined at 30 degress to HP . The
section plane is passing through the top end of an extreme lateral
edge of the prism . Draw development of the lateral surface of the
cut prism.
