BSS Telecom Parameters

Delta between edition 11 released and edition 10 released

nb of modified Sub-System parameters BSC 2

Delta for the BSS Telecom Parameters Catalogue

Sub-system: BSC Logical FDD_REPORTING_OFFSET B10 Oui B9 Oui name HMI name FDD_REPORTING_OFFSET Definition Offset that the MS shall apply to measurements before reporting Sub-system BSC Category Site (CAE) Instance cell OMC-R access None (not in DLS) Type Number Min value 0 Coded Min 0 Unit dB Max value 42 Coded Max 7 Application domain 2G-3G Def value 0 Coded Def 0 Spec reference System information management Rec reference 3GPP TS 45.008 Coding rules step size = 6dB (0 : 0dB, 1 : 6dB, 7 : 42dB) Mandatory rules -- Recommended -- rules Internal Comment This parameter is kept in the MIB but shown neither on any HMI screens nor in customer documentations. It is linked to the feature ENHANCED MEASUREMENT REPORT which is not supported in the ALU BSS. Important: this parameter is in DLS but is indicated "not in DLS" in order to be removed from the GCD table. External Comment -- Modif date Modif description 21/11/2007 Ed11: to be removed from GCD table: set to "not in DLS" although it is in DLS: see the internal comment

Delta for the BSS Telecom Parameters Catalogue Page 2 of 3

Logical FDD_REPORTING_THRESHOLD B10 Oui B9 Oui name HMI name FDD_REPORTING_THRESHOLD Definition Threshold above which the MS shall report the measurements Sub-system BSC Category Site (CAE) Instance cell OMC-R access None (not in DLS) Type Threshold Min value 0 Coded Min 0 Unit dB Max value 42 Coded Max 7 Application domain 2G-3G Def value 0 Coded Def 0 Spec reference System information management Rec reference 3GPP TS 45.008 Coding rules step size = 6dB Coded value (binary) : Value (dB) : 0 : 0 : Always report the 3G neighbor cells 1 : 6 : 6 dB 2 : 12 : 12 dB 3 : 18 : 18 dB 4 : 24 : 24 dB 5 : 30 : 30 dB 6 : 36 : 36 dB 7 : 42 : Never report the 3G neighbor cells Mandatory rules -- Recommended -- rules Internal Comment This parameter is kept in the MIB but shown neither on any HMI screens nor in customer documentations. It is linked to the feature ENHANCED MEASUREMENT REPORT which is not supported in the ALU BSS. Important: this parameter is in DLS but is indicated "not in DLS" in order to be removed from the GCD table. External Comment -- Modif date Modif description 21/11/2007 Ed11: to be removed from GCD table: set to "not in DLS" although it is in DLS: see the internal comment

Delta for the BSS Telecom Parameters Catalogue Page 3 of 3